PRODUCT TECHNOLOGY BRAND TECHNICAL DATA VALUE ADDED
Plants Air Separation Unit (Cryogenic)
SIAD Macchine Impianti, Italy
Capacity: Oxygen: up to 40,000 Nm3/hNitrogen: up to 120,000 Nm3/h Argon: up to 1,400 Nm3/h
Purity: Oxygen: up to 99.95%Nitrogen: less than 1ppm (O2)Argon: less than 1ppm (O2)
Gas:Oxygen, Nitrogen, Argon (Liquid or Gas)
∞ Long history in the gas sector ∞ Easy maintenance ∞ Efficient and cost saving standard solutions ∞ Customized engineered plant
Smart Liquid SIAD Macchine Impianti, Italy
Capacity: Oxygen: from 330 Nm3/h to 2,500 Nm3/h Nitrogen: from 600 Nm3/h to 3,000 Nm3/h
Purity: Oxygen: 99.6% Nitrogen: 99.99% and up to 10 ppm of O2
Gas:Oxygen, Nitrogen (Liquid)
∞ Lower CAPEX ∞ Quick lead time (12 months)∞ Mobile (easy to move to different locations)∞ Easy maintenance ∞ Ergonomic design (5 modules) ∞ Low power consumption∞ Easy and fast to install (15 days)
Compressors Reciprocating Compressor(API618 - API11P)
SIAD Macchine Impianti, Italy
Type: lube and oil free
Power: from 10 kW to 8.7 MW
Compression stages: up to 6 stages
Speed: low - moderate and high speed
Capacity: up to 90,000 Nm3/h
Pressure: up to 600 Bar(a)
Cylinder arragement: vertical, horizontal
Gas: all gases (O2, H2, N2, Air, CO2, H2S, Hydrocarbons, N20, Natural Gas..)
∞ High performance with the lowest power consumption∞ Eco compatibility ∞ Safety ∞ Tailor-made compressors (skid mounted or on foundation)∞ API 618, ISO13631 (ex API11P), EIGA, Standard Manufacturer∞ Easy maintenance∞ Ergonomic layout
Screw Compressor (API619)
Blutek, Italy Type: lube and oil free
Power: from 22 kW to 500 kW
Pressure: from 4 to 16 Bar(g)up to 30 Bar (g) on request
Nitrogen Generation skid: N2 Flow Capacity: from 10 to 3000 Nm3/hN2 Purity: 95 - 99.9%
Gas: Air
∞ Safety (proper material selection) ∞ API619, ASME VIII Div.1 U-STAMP, ISO10440-1, ISO10440-2, ATEX class 1 div 1 ∞ Tailor made skid mounted compressor ∞ Single and common skid design for onshore and offshore∞ In house design and calculation software
Heat Exchangers
Plate&Shell Heat Exchanger
Vahterus, Finland Capacity: up to 2,000 m2 / heat exchanger
Pressure: full vacuum to 150 bar
Temperature: from -164°C to 899°C
∞ The original plate & shell heat exchangers∞ Fully welded and strong construction∞ Ultra compact in weight and footprint∞ High thermal efficiency∞ Easy maintenance∞ Tailor made solutions
Valves Metal Seated Ball Valve
Soft Seated Ball Valve
Penta Valves, Italy
Size: from 1/2" to 24"
Rating: from 150 Lb. to 2,500 Lb.
Temperature: from -196°C to 700°C
Service: dangerous and abrasive gases
Gas/Fluid: all gases and fluids
∞ Competitive delivery (from 4 to 18 weeks) ∞ Flexible in the design of gasket and seat∞ Certifications and tests (PED, ATEX, ISO, Fire Safe, SIL) ∞ PENTAfite technology: - Perfect tightness - No additional machining - Easy maintenance and lower cost
Other Products
On request, we can support you with the following additional products and solutions:∞ Valves (globe, gate, butterfly, check) ∞ Compressor (Air compressor for PET, membrane) ∞ Plant (CO2 Plant, N2/O2 PSA Plant)∞ Shell and Tube Heat Exchangers ∞ Pumps ∞ Gas Cylinders Caps ∞ Indirect Fired Heater ∞ Burners ∞ Metering Systems ∞ Piping
INDUSTRY AIR
SEP
ARAT
ION
UN
IT (A
SU)
SM
ART
LIQ
UID
PLA
NT
REC
IPRO
CATI
NG
CO
MPR
ESSO
R
SCR
EW C
OM
PRES
SOR
HEA
T EX
CHAN
GER
VAL
VES
INDUSTRIAL GASES ∞ ∞ ∞ ∞ ∞ ∞
OIL and GAS, EXPLORATION and PRODUCTION ∞ ∞ ∞ ∞ ∞
OFF-SHORE (FLNG, FPSO, FLNG) ∞ ∞ ∞ ∞
LIQUEFIED NATURAL GAS (LNG) ∞ ∞ ∞ ∞
REFINERY ∞ ∞ ∞ ∞ ∞
PETROCHEMICAL ∞ ∞ ∞ ∞ ∞
CHEMICAL ∞ ∞ ∞ ∞ ∞
ENERGY & POWER GENERATION ∞ ∞ ∞ ∞ ∞
WATER TREATMENT & TRANSMISSION ∞ ∞ ∞
FOOD & BEVERAGE ∞ ∞ ∞ ∞
METAL ∞ ∞ ∞
MINING ∞ ∞ ∞
CEMENT ∞ ∞ ∞
ENVIRONMENTAL ∞ ∞ ∞ ∞ ∞
GLASS ∞ ∞ ∞
REFRIGERATION ∞ ∞ ∞
References worldwide available on request.
Q-Boss Pty Ltd
97-101 Poole St, Welshpool WA 6106 Australia
T: +61 8 9467 6066 F: +61 8 9463 1452 W: www.q-boss.com.au
Q-Boss is a specialised Australian solutions provider ofhighly, reliable, innovative, money saving process solutions in many industries.
We are committed to long term relationships with our clients and tothe utmost care in the quality of process engineering design and solution.
JULY
20
16
Reliability
Flexibility
Quick response
Innovation technology
Cost saving solutions
Internal know how
After sales (training, original spare parts, service)
Engineering and Production in the same place
Consultancy from the feasibility study stage onwards