ground gear for athletes
BAL ANCE ™ SP82 -M
SERIESBAL ANCE
BA
LA
NC
E™ S
P82-M
PR
OD
UC
T T
ES
T R
ES
ULT
S
ALL TESTS PERFO
RMED
BY TESTIN
G SERVICES, IN
C., DA
LTON
, GA
WW
W.U
BU
SP
OR
TS.C
OM
1-800-828-8700
Individual Testing Reports are available upon request, which provide the detailed test results and specific procedures.
TEST C
OD
E TES
T RES
ULT
TEST D
ESC
RIP
TION
TES
T NA
ME
ASTM F355-01
Gmax 97 HIC 259
Gmax RATING
Standard test method for shock-absorbing properties of playing surface system
s and materials
ASTM F1015-03
21 +/- 2
RELATIVE ABRASIVE INDEX Standard test m
ethod for relative abrasiveness of synthetic turf playing surfacesASTM
F2117-01 24.7 INCHES / 62.7 CM
AVERAGE BALL REBOUND HEIGHT
Standard test method for vertical rebound characteristics of sports surface/ball system
s; acoustical measurem
entASTM
F2117-01 0.35 (CR)
COEFFICIENT OF RESTITUTION (CR) Standard test m
ethod for vertical rebound characteristics of sports surface/ball systems; acoustical m
easurement
ASTM F1551-03
27.1 INCHES / 68.9 CM
AVERAGE BALL BOUNCE Standard test m
ethods for comprehensive characterization of synthetic turf playing surfaces and m
aterialsASTM
F1551-03 STATIC COF: 1.40 DYNAM
IC COF: 1.10 SOCCER SHOE TRACTION –
DRY Standard test m
ethods for comprehensive characterization of synthetic turf playing surfaces and m
aterialsASTM
F1551-03 STATIC COF: 1.30 DYNAM
IC COF: 0.80 SOCCER SHOE TRACTION –
WET
Standard test methods for com
prehensive characterization of synthetic turf playing surfaces and materials
ASTM F1551-03
STATIC COF: 1.40 DYNAMIC COF: 1.00
FOOTBALL SHOE TRACTION – DRY
Standard test methods for com
prehensive characterization of synthetic turf playing surfaces and materials
ASTM F1551-03
STATIC COF: 1.30 DYNAMIC COF: 0.90
FOOTBALL SHOE TRACTION – W
ET Standard test m
ethods for comprehensive characterization of synthetic turf playing surfaces and m
aterialsASTM
D5848-07 115.00 OZ Y² / 3.90 KG M
² TOTAL W
EIGHT Standard test m
ethod for mass per unit area of pile yarn floor coverings
ASTM D5848-07
79.88 OZ Y² / 2.71 KG M²
PILE WEIGHT
Standard test method for m
ass per unit area of pile yarn floor coveringsASTM
D5848-07 7.59 OZ Y² / 0.26 KG M
² PRIM
ARY BACKING WEIGHT
Standard test method for m
ass per unit area of pile yarn floor coveringsASTM
D5848-07 27.53 OZ Y² / 0.93 KG M
² SECONDARY BACKING W
EIGHT Standard test m
ethod for mass per unit area of pile yarn floor coverings
ASTM D5823-05A
2.14 INCHES / 54.36 MM
PILE HEIGHT
Standard test method for tuft height of pile floor coverings
ASTM D1335-05
EXCEEDS STC STANDARDS TUFT BIND STRENGTH
Standard test method for tuft bind of pile yarn floor coverings
ASTM D5034-09
(MD) 279.1 LBS FORCE / 1,241 N
GRAB TEAR STRENGTH Standard test m
ethod for breaking strength and elongation of textile fabrics (grab test)ASTM
D5034-09 (CM
D) 204.1 LBS FORCE / 908 N GRAB TEAR STRENGTH
Standard test method for breaking strength and elongation of textile fabrics (grab test)
ASTM D5793-05
10 PER 3 INCHES / 10 PER 7.62 CM
STITCHES PER 3 INCHES Standard test m
ethod for binding sites per unit length or width of pile yarn floor coverings
ASTM D5793-05
3/8 INCH / 9.5 MM
M
ACHINE GAUGE Standard test m
ethod for binding sites per unit length or width of pile yarn floor coverings
ASTM D2859-06
PASS FLAM
MABILITY - PILL BURN
Standard test method for ignition characteristics of finished textile floor covering m
aterialsASTM
E648-08B N/A
FLAMM
ABILITY - RADIANT PANEL Standard test m
ethod for critical radiant flux of floor-covering systems using a radiant heat energy source
ASTM F1951-09
PASS W
HEEL CHAIR ACCESSIBILITY Standard specification for determ
ination of accessibility of surface systems under and around playground equipm
entBS7044 - M
ETHOD 4 EXCEEDS 40 INCHES (1016 M
M) PER HR
INFILTRATION RATE Determ
ination of infiltration rate-buffered ponding-type infiltrometer
ASTM D1907-07
9,385 DENIER / 10,428 DTEX FIBER DENIER
Standard test methods for linear density of textile fibers by the Skein M
ethodASTM
D3218-07 0.0045 INCHES / 0.11 M
M
FIBER THICKNESS Standard specification for polyolefin m
onofilaments
ASTM D3218-07
0.40 INCHES / 10.16 MM
FIBER W
IDTH Standard specification for polyolefin m
onofilaments
ASTM D789-07
248°F / 120°C FIBER M
ELTING POINT Standard test m
ethods for determination of solution viscosities of polyam
ide (pa)ASTM
D792-08 0.951
FIBER SPECIFIC GRAVITY Standard test m
ethods for density and specific gravity (relative density) of plastics by displacement
ASTM D2256-02(2008)
24.07 LBS / 107.1 N FIBER BREAKING STRENGTH
Standard test method for tensile properties of yarns by the single-strand m
ethodASTM
D2256-02(2008) 47.5%
FIBER ELONGATION
Standard test method for tensile properties of yarns by the single-strand m
ethodASTM
D1907-07 7,650 DENIER / 8,500 DTEX
FIBER DENIER Standard test m
ethods for linear density of textile fibers by the Skein Method
ASTM D3218-07
0.0070 INCHES / 0.18 MM
FIBER THICKNESS
Standard specification for polyolefin monofilam
entsASTM
D3218-07 0.03 INCHES / 0.79 M
M
FIBER WIDTH
Standard specification for polyolefin monofilam
entsASTM
D789-07 257°F / 125°C
FIBER MELTING POINT
Standard test methods for determ
ination of solution viscosities of polyamide (pa)
ASTM D792-08
0.951 FIBER SPECIFIC GRAVITY
Standard test methods for density and specific gravity (relative density) of plastics by displacem
entASTM
D2256-02(2008) 18.33 LBS / 82 N
FIBER BREAKING STRENGTH Standard test m
ethod for tensile properties of yarns by the single-strand method
ASTM D2256-02(2008)
105.0 %
FIBER ELONGATION Standard test m
ethod for tensile properties of yarns by the single-strand method
PERFORMANCE TESTINGSYSTEM TESTINGFIBER TESTINGGRASS ZONEMICRO BED
UC 2825 PDS BALANCE SP82-M 0909
SP82 -MBAL ANCE
ground gear for athletes
The UBU Balance Series dual fiber construction
features a Micro Bed™, which acts as a sustainable region to improve
the product’s durability. Available in various fiber profiles and infill options,
the Balance Series is an advanced hybrid fiber system designed for applications
where durability is as important as performance.
BALANCE™ SP82-M
F O R M O R E I N F O R M A T I O N A B O U T T H E S E A N D O T H E R P R O D U C T F E A T U R E S , V I S I T O U R W E B S I T E : W W W . U B U S P O R T S . C O M
P R O D U C T F E AT U R E S
1
2
3
4 5
5A
5B
5C 6
BALANCE SP82-M SYNTHETIC TURF SYSTEM
1 HARMONY FIBER – 2.0” of our exclusiveslit-film fiber provides a lush and durable playing surface.
2 MICRO BED – 1.5” of MICRO P fiber helps controlinfill fly-out and adds density for additional durability.
3 INFILL – Our infill is a mix of 30% sand 70% rubber,for a firm and fast surface.
4 PERFORATIONS – Drainage perforations are provided to allowwater to move quickly through the turf and into the drainage system.
5 ARMOUR WEAVE BACKING SYSTEM – Our premiere backing system includes multiple layers for a long-lasting playing surface: (5A) 18 PIC POLYBACK layer to lock in fibers (5B) COLBOND layer to provide dimensional stability (5C) STITCH LOCK layer for long-lasting seams
6 SECONDARY BACKING SYSTEM – 20 OZ Y² (0.68 KG M²) of Urethaneis applied to ensure fiber retention.
P R O D U C T S P E C I F I C AT I O N S
WWW.UBUSPORTS.COM
1-800-828-8700
2.0”
/ 5
1MM
FIB
ER H
EIG
HT
3/8g 8/3S
ISO GRID
1476
DENSITY RATING
1024
FIBERS PER SF
8 YEARS
INSURED WARRANTY
U B 8 2 5 1 A P A M
FIELD GREEN
WHITEGRAYBLUENAVY LIGHT BLUE BLACKSILVER
WINTER GREEN LAWN GREEN PUTTING GREEN OLIVE GREEN LIME GREEN BROWN
DARK BLUEREDYELLOW PURPLEMAROONORANGEGOLD
PRINTED COLORS ONLY APPROXIMATE
ACTUAL FIBER COLORS. ASK YOUR SALES
REPRESENTATIVE FOR EXACT COLOR
SAMPLES. ADDITIONAL CUSTOM COLORS
MAY ALSO BE AVAILABLE. ADDITIONAL
CHARGES AND MINIMUM QUANTITIES
APPLY TO NON-STANDARD COLORS.
SPECIFICATIONS GRASS ZONE MICRO BED PRODUCT SPECIFICATIONS: UB8251APAM GRASS ZONE FIBER HARMONY FIBER MICRO P GRASS ZONE: 41 OZ Y² / 1.39 KG M²
FIBER TYPE AMS-SLIT FILM MONOFILAMENT MICRO BED: 41 OZ Y² / 1.39 KG M²
FIBER HEIGHT 2.0 INCHES / 51 MM 1.5 INCHES / 38 MM ARMOUR WEAVE BACKING: 8 OZ Y² / 0.27 KG M²
FIBER DENIER 9,000 DENIER / 10,000 DTEX 9,000 DENIER / 10,000 DTEX URETHANE BACKING: 20 OZ Y² / 0.68 KG M²
FIBER MICRONS 115 150 TOTAL SYSTEM WEIGHT: 110 OZ Y² / 3.73 KG M²
FILAMENT STRUCTURE 7 FIBRILS 6 FIBRILS INFILL: RUBBER: 3.3 LBS FT² / 16.11 KG M²
FIBRIL WIDTH 0.0472 INCHES / 1.2 MM 0.0433 INCHES / 1.1 MM INFILL: SAND: 1.5 LBS FT² / 7.32 KG M²
STANDARD COLOR O P T I O N A L C O L O R S
GRA
SS Z
ON
E
MIC
RO B
ED
1.5”1.5”
0.5”0.5”
2.0”
1.0”1.0”
R E F E R T O T H E P R O D U C T S P E C I F I C A T I O N S H E E T F O R F U R T H E R T E C H N I C A L D E T A I L S A N D M A N U F A C T U R I N G T O L E R A N C E S
MIXED
INFILL