Date post: | 19-Jan-2016 |
Category: |
Documents |
Upload: | luis-victor |
View: | 20 times |
Download: | 1 times |
This article was downloaded by: [Montana State University Bozeman]On: 18 August 2014, At: 03:40Publisher: Taylor & FrancisInforma Ltd Registered in England and Wales Registered Number: 1072954 Registered office: Mortimer House,37-41 Mortimer Street, London W1T 3JH, UK
Preparative Biochemistry and BiotechnologyPublication details, including instructions for authors and subscription information:http://www.tandfonline.com/loi/lpbb20
Production and Partial Purification of Tannase FromAspergillus ficuum Gim 3.6Wan-liang Maa, Fen-fen Zhaoa, Qin Yea, Zhen-xing Hua, Dong Yana, Jie Houa & Yang Yanga
a College of Life Science and Technology, Guangxi University, Nanning, ChinaAccepted author version posted online: 15 Aug 2014.
To cite this article: Wan-liang Ma, Fen-fen Zhao, Qin Ye, Zhen-xing Hu, Dong Yan, Jie Hou & Yang Yang (2014): Productionand Partial Purification of Tannase From Aspergillus ficuum Gim 3.6, Preparative Biochemistry and Biotechnology, DOI:10.1080/10826068.2014.952384
To link to this article: http://dx.doi.org/10.1080/10826068.2014.952384
Disclaimer: This is a version of an unedited manuscript that has been accepted for publication. As a serviceto authors and researchers we are providing this version of the accepted manuscript (AM). Copyediting,typesetting, and review of the resulting proof will be undertaken on this manuscript before final publication ofthe Version of Record (VoR). During production and pre-press, errors may be discovered which could affect thecontent, and all legal disclaimers that apply to the journal relate to this version also.
PLEASE SCROLL DOWN FOR ARTICLE
Taylor & Francis makes every effort to ensure the accuracy of all the information (the “Content”) containedin the publications on our platform. However, Taylor & Francis, our agents, and our licensors make norepresentations or warranties whatsoever as to the accuracy, completeness, or suitability for any purpose of theContent. Any opinions and views expressed in this publication are the opinions and views of the authors, andare not the views of or endorsed by Taylor & Francis. The accuracy of the Content should not be relied upon andshould be independently verified with primary sources of information. Taylor and Francis shall not be liable forany losses, actions, claims, proceedings, demands, costs, expenses, damages, and other liabilities whatsoeveror howsoever caused arising directly or indirectly in connection with, in relation to or arising out of the use ofthe Content.
This article may be used for research, teaching, and private study purposes. Any substantial or systematicreproduction, redistribution, reselling, loan, sub-licensing, systematic supply, or distribution in anyform to anyone is expressly forbidden. Terms & Conditions of access and use can be found at http://www.tandfonline.com/page/terms-and-conditions
Accep
ted M
anus
cript
1
Production and partial purification of tannase from Aspergillus ficuum Gim 3.6
Wan-liang Ma1, Fen-fen Zhao
1, Qin Ye
1, Zhen-xing Hu
1, Dong Yan
1, Jie Hou
1, Yang
Yang1
1College of Life Science and Technology, Guangxi University, Nanning, China
Corresponding author: E-mail: [email protected]
Abstract
A novel fungal strain, Aspergillusficuum Gim 3.6, was evaluated for its
tannase-producing capability in the wheat bran-based solid state fermentation. Thin-layer
chromatography (TLC) analysis revealed that the strain was able to degrade tannic acid to
gallic acid and pyrogallol during the fermentation process. Quantitation of enzyme
activity demonstrated that this strain was capable of producing a relatively high yield of
extracellular tannase. Single-factor optimization of process parameter resulted in high
yield of tannase after 60 h of incubation at a pH of 5.0 at 30oC, 1 ml of inoculum sizeand
1:1 of solid-liquid ratio in the presence of 2.0% (w/v) tannic acid as inducer. The
potential of aqueous two-phase extraction (ATPE) for the purification of tannase was
investigated. Influence of various parameters such as phase-forming salt, molecular
weight of polyethylene glycol (PEG), pH, and stability ratio on tannase partition and
purification was studied. In all the systems, the target enzyme was observed to
preferentially partition to the PEG-rich top phase, and the best result of purification
(2.74-fold) with an enzyme activity recovery of 77.17% was obtained in the system
containing 17% (w/w) sodium citrate and 18.18% (w/w) PEG1000, at pH 7.0.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
2
KEYWORDS: tannase, Aspergillusficuum, aqueous two phase system, sodium citrate
1. INTRODUCTION
Tannin acyl hydrolase (EC 3.1.1.20), also known as tannase, is an inducible enzyme
which can be produced in the presence of inducer such as tannic acid by various
microorganisms, mainly by filamentous fungi, such as Aspergillus and Penicillium[1]
, and
also by yeast [2-4]
and bacteria [5-8]
. Tannase consists of esterase and depsidase activities
by which it can catalyze the ester and depside bonds of hydrolysable tannins to release
glucose and gallic acid[9, 10]
. As a commercially valuable enzyme, tannase has been
extensively used in a variety of fields including food, beverage, chemical and
pharmaceutical industries. In the pharmaceutical industry, tannase is mainly used in the
manufacture of gallic acid, a key intermediate required for the preparation of a
well-known antibacterial drug, trimethoprim[11]
. In addition, this enzyme is used in the
elaboration of instant tea, and acted as clarifying agent in some wines, juices of fruits and
refreshing drinks with coffee flavor.
Generally, the effective utilization of this enzyme calls for some requirements in the
purity. Purification is, therefore, a determinant step for the preparation of pure enzyme.
Several methods have been developed for the purification of tannase from a variety of
microbes [12-14]
. In most cases, the first step of tannase purification is ammonium sulfate
or acetone precipitation [15]
, which leads to a concentration of crude enzyme as well as
purification. Then column chromatography techniques such as ion-exchange
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
3
chromatography and gel filtration chromatography are employed, which results in a high
level of purity. Nevertheless, the scale up of these methods is difficult since the use of
multistep procedures results in high loss of yield, and high costs of supplies and operation.
Thus, the development of an effective and economically advantageous method for
tannase purification is a challenging area. In this respect, aqueous two phase extraction
(ATPE) could be an attractive option due to their distinctive advantages such as mild
environment for the biomolecules, short time for partition equilibrium, ease of scale-up
and low cost. In view of this, purification of tannase has been reported recently
employing PEG/potassium phosphate system, resulting in 96% enzyme recovery with a
7.0-fold increase in purity[16]
. The major drawback of this system, however, is the
phase-forming salt used, which can lead to high phosphate concentration in the effluents,
and therefore cause environmental problems in the large-scale process. Fortunately, this
problem can be avoided by using biodegradable salts such as citrate. In fact, there has
been a tendency to use PEG/citrate systems for the recovery of biomolecules due to the
biodegradability and lower environmental toxicity of citrate compared to some other
well-studied salts, such as inorganic phosphate and sulfate salts [17-20]
.
To the author’s knowledge, there has to date been no available literatures about tannase
production by Aspergillusficuum. We therefore conducted this study to estimate the
capability of A. ficuum Gim 3.6 to produce tannase. Besides, the potential of APTE for
the partial purification of crude tannase was investigated.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
4
2. EXPERIMENTAL
2.1. Microorganism
Aspergillusficuum Gim 3.6 was purchased from Microbial Culture Collection Center of
Guangdong Institute of Microbiology(Guangdong, China), and maintained on potato
dextrose agar (PDA) slants at 4oC in a refrigerator.
2.2. Chemical Reagents
Propyl gallate, tannic acid and rhodanine were obtained from Tianjin Kermel Chemical
Reagents Development Center, Tianjin, China. Polyethylene glycols (PEGs) with average
molecular weight of 600, 1000, 4000 and 6000g/mol were purchased from Chengdu
Kelong Chemical Co., Ltd., Chengdu, China. All other chemical reagents were of
analytical grade.
2.3. Inoculum Preparation
The original strain was activated by scraping one loop of the strain to the PDA slant and
incubated at 30 oC for 4~5 days. For inoculum preparation, 10 ml of sterile normal saline
(0.9% NaCl) was added to the fully sporulated agar slant, and the cultures were gently
scraped with a sterile inoculating loopto dislodge the conidia off the slant. The resulting
suspension containing approximately 1.1×109
spores/ml was used as inoculum for
subsequent fermentation experiments.
2.4. Tannase Production Under Solid State Fermentation
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
5
Solid state fermentation (SSF) was employed for the production of extracellular tannase.
Five grams of wheat bran was added to a 250 ml Erlenmeyer flask, moistened with 5.0 ml
of salt solution (containing NH4Cl 10g/L, MgSO4·7H2O 2g/L, NaCl 2 g/Land tannic acid
20 g/L, pH 5.0) and autoclaved at 121 oC for 20 min. After cooling, the solid medium was
inoculated with 1 ml (1.1×109 spores) of the spore suspension (as prepared above). The
contents were fully mixed and then incubated at 30 oC for 72 h. In this period, the solid
substrate was scattered at irregular intervals to breakup any aggregates so as to ensure the
normal growth of microbial cells and enzyme synthesis.
After the desired incubation time, the extraction of crude enzyme was done by adding 50
ml of citrate buffer (0.1M, pH5.0) to the mouldy fermented medium. The contents were
agitated in a shaker at 160 rpm for 1~2 h, filtrated through double-layer cheese cloth, and
the filtrate was centrifuged at 6790×g for 10 min. The supernatant was collected and
stored at 4oC for further analysis.
2.5. Detection Of Tannic Acid Degradation Products By Thin-Layer
Chromatography (TLC)
The tannic acid degradation by A. ficuum Gim 3.6 was detected using thin-layer
chromatography (TLC) method. The thin layer plates (10 × 10 cm) were covered with
silica gel G to a thickness of 0.5 mm, air-dried and activated in an oven at 105oC for 30
min. Solutions of gallic acid and pyrogallol standards at a concentration of 4 mg/ml were
prepared in methanol. Aliquots (5μl) of standards along with enzyme samples from 12 h,
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
6
24 h and 48 h incubation were spotted on the silica gel plate. A mixture of chloroform,
ethyl acetate and formic acid (4:4:1) was used as the mobile phase. The chromatography
was run in an airtight container for 30 min. After drying, the plate was sprayed with
FeCl3 solution (0.01 g/ml, prepared in methanol), and then placed in an oven at 105oC for
5 min. The degradation products of tannic acid by A. ficuum Gim 3.6 appeared as colored
spots were identified by their respective Rf values.
2.6. Single-Factor Optimization Of Tannase Production
Various optimum parameters required for maximum tannase production by A. ficuum
Gim 3.6 in the solid state fermentation were determined. The effects of incubation period
(20 h~140 h), incubation temperature (25oC~50
oC), pH of salt solution (3.0~8.0) and
tannic acid concentration (1%~8%, w/v)on tannase production by A. ficuum Gim 3.6were
primarily investigated. Then, the effect of different inoculum sizes (0.2 ml~2.5 ml) on
tannase production was studied. Based on the optimum conditions determined above, the
SSF was conducted at different solid-liquid ratios (1:0.6~1:1.8) to obtain maximum
tannase production. All the experiments were performed in triplicate and average values
were reported with standard deviation.
2.7. Phase Diagrams
Phase diagrams for PEG/sodium citrate aqueous two-phase systems (ATPSs)were
obtained experimentally following the cloud point method[21]
. Firstly, a given mass of
40% (w/w) PEG stock solution was added into a 50-ml test tube. Then, a 40% (w/w)
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
7
sodium citrate stock solution was added dropwise to the PEG solution to make the
mixture turbid, which indicated the beginning of the formation of a two-phase system.
The composition of this mixture was recorded and taken as a binodal point. A small
amount of distilled water was then added dropwise to the tube until the turbidity
disappeared. The above steps were repeated until enough points were obtained to form a
binodal curve.
2.8. Aqueous Two-Phase Extraction
Aqueous two-phase systems were prepared (based on the phase diagrams) in 10-ml
graduated centrifuge tubes by the addition of appropriate amounts of PEG (MW 600,
1000, 4000, and 6000) stock solution, sodium citrate stock solution, and enzyme extract.
Distilled water was added whenever necessary to make the total mass of 10 g. The pH of
the system was assumed to be equal to that of the sodium citrate stock solution. The pH
of the sodium citrate stock solution was adjusted with 0.1M HCl solution. The mixture
was thoroughly mixed in a vortex mixer for about 5 min and centrifuged at 954×gat room
temperature for 10 min to speed up phase separation. The volume of each phase was
directly estimated in graduated centrifuge tubes and aliquots from each phase were taken
for the activity assay and protein determination. All the tests were performed in duplicate
and average values were reported.
Effects of various parameters including phase-forming salt, molecular weight of PEG, pH
and stability ratio on tannase partition and purification in aqueous two-phase system
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
8
(ATPS) were studied. The stability ratio, previously reported by Zhou et al. [22]
, was
selected as an influential factor on tannase portioning, as it is similar to the tie line length
(TLL) which, in most cases, is one of the studied parameters in ATPE experiments.
Moreover, determination of stability ratio is relatively simple. The stability ratio is
illustrated in Figure 1. In the figure, point A is the point on the binodal curve, and point B,
C, D, and E are the operating points chosen for the ATPE experiments. The
corresponding value of stability ratio of point B was calculated according to equation (1),
and the stability ratio values of other three points can be calculated in the same way.
OB
ABratio Stability
(1)
Where AB and OB represent the length of the segments from A to B, and O to B,
respectively.
Following this calculation method, the stability ratio values of B, C, D, and E were
obtained as 0.0625, 0.1176, 0.1667 and 0.2500, respectively.
2.9. Estimation Of Partition Coefficient, Activity Recovery And Purification Fold
The partition coefficients of tannase (Ke) or total proteins (Kp) were defined as the
enzyme activity or protein concentration in the top phase to that in the bottom phase, as
shown in equations (2) and (3):
b
te
A
AK
(2)
b
tp
C
CK
(3)
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
9
Where At and Ab are the tannase activity in the top and bottom phases, respectively. Ct and
Cb are the equilibrium concentrations of the protein in the top phase and bottom phase,
respectively.
Activity recovery (Y) was defined as the total activity in the top phase to that in the initial
added crude enzyme and can be calculated by equation (4):
%100(%)ii
tt
VA
VAY
(4)
Where Vt and Vi are the volumes of the top phase and initial crude enzyme extract,
respectively. Ai is the enzyme activity in the crude extract.
Purification fold (PF) was defined as the ratio of the specific activity in the top phase to
that in the crude enzyme and can be calculated according to equation (5):
ii
tt
CA
CAPF
(5)
Where Ci is the protein concentration in the initial crude enzyme.
2.10. Determination Of Enzyme Activity And Protein Concentration
Tannase activity was determined as per the rhodanine method of Sharma et al. [23]
with a
slight modification, using propyl gallate (PG) instead of methyl gallate as the substrate.
In this method, tannase catalyzes the hydrolysis of the galloyl ester linkage of the
substrate PG to release gallic acid which reacts subsequently with rhodanine to give a red
complex with a maximum absorbance at 520 nm.The substrate solution (10 mM PG
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
10
prepared in 0.1 M citrate buffer, pH5.0) and enzyme sample were preincubated at 30oC
for 10 min, and the enzyme reaction then started. For simplicity, we diagramed the assay
procedure of tannase activity in Figure 2. One unit of tannase was defined as the amount
of enzyme required to release 1μmol of gallic acid per minute under the assay conditions.
Tannase activity is expressed as units per gram of dry substrate (U/gds).
Protein concentration was determined according to the method proposed by Bradford [24]
using bovine serum albumin as the standard. The absorbance was measured at 595 nm
using a UV-vis spectrophotometer (Shimadzu UVmini-1240, Kyoto, Japan). To avoid the
interference of phase components on protein determination, samples from equilibrium
phases were diluted and analyzed against blanks with the same composition but without
enzyme extract.
3. RESULTS AND DISCUSSION
3.1. Tannase Production Under Solid State Fermentation
Tannase can be obtained from microbial, animal and vegetal sources, but microorganisms
(especially filamentous fungi) are commonly used for commercial production since
tannase obtained by this way is more stable [25]
. Although microbial production of tannase
from Aspergillus species has been well documented, the enzyme productivity has been
relatively low, such as 4.36 U/gds[26]
and 3.42 U/gds[27]
for Aspergillusoryzae, and 6.44
U/gds for Aspergillusniger ATCC 16620 [28]
. In this work, tannase production using a new
fungal strain, A. ficcum Gim 3.6, was attempted. After the specific period of incubation,
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
11
crude enzyme was extracted and qualitative analysis of the tannic acid degradation
products and quantitative assay of tannase activity were carried out. Thethin layer
chromatographic separation of tannic acid degradation products is illustrated Figure 3(A).
When compared with standards, the spots of gallic acid and pyrogallol were detected in
the TLC plates. The appearance of gallic acid and pyrogallol demonstrates that tannic
acid was degraded byA. ficcum Gim 3.6 during the fermentation process. It has been
known that tannase can specifically hydrolyze the galloyl ester bonds of tannins.
According to the result of TLC, we hypothesised that tannic acid in the culture medium
was degraded by A. ficcum Gim 3.6 (by the secretion of tannase) to gallic acid in the early
stage of fermentation, thereafter gallic acid decarboxylase catalyze the second step in the
degradation of the tannic acid, the decarboxylation of gallic acid to pyrogallol. The
proposed biochemical pathway for the degradation of tannic acid by A. ficcum Gim 3.6 is
presented in Figure 3(B). Quantitative determination of tannase indicated that the crude
extract shown an activity of 8.65 U/gds. From the above results it could be unequivocally
deduced that A. ficcum Gim 3.6 possesses the metabolic ability to degrade tannic acid by
secreting the enzyme tannase.
3.2. Single-Factor Optimization Of Tannase Production
Single-factor tests were carried out to evaluate the effects of various process parameters
on tannase production, and the results are presented in Figure 4. The effect of incubation
period and incubation temperature on tannase production is shown in Figure 4(A). It was
observed that the enzyme production increased progressively from 20 h to 60 h, and an
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
12
incubation period of 60 h was best for maximum tannase production (9.94 U/gds);
thereafter, the production of tannase started decreasing with time, which might be due to
the inhibition effect of metabolites produced by microbes [29]
. Moreover, with the
prolonging of time, substrate scarcity would occur, and the secretion of some toxic
substances could lead to cell lysis.
A significant difference in the enzyme production was observed when the fermentation
was performed at different temperatures (25~50oC). Among the various incubation
temperatures, the maximum enzyme yield of 9.34 U/gds was obtained at 30oC, whereas
above 30oC, the enzyme activity decreased (Figure 4(A)). The depletion of enzyme
production at higher temperature might be due to the mycelial growth inhibition caused
by the sporulation induced with increased temperature [30]
. In addition, a high temperature
may lead to evaporation of liquid content which is required for microbial growth and
enzyme synthesis.
The influence of initial pH of salt solution on the production of tannase is presented in
Figure 4(B), from which it can be seen that an initial pH of 5.0 gave maximum tannase
production (9.23U/gds). Below or above 5.0, there was a decrease in tannase activity.
This is in good accordance with some other reports [30-32]
. It is generally known that the
metabolic activities of microorganisms are very sensitive to changes in pH, microbial
growth and tannase secretion would be inhibited in the unsuitable pH circumstance.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
13
A certain level of tannic acid is needed for tannase production since tannase is an
inducible enzyme. The enzyme production increased with increasing inducer
concentration (ranging from 1~8%) up to 2.0 % (w/v) beyond which a declining trend of
tannase activity was observed (Figure 4(B)). This is because tannic acid itself is toxic for
the microbes which may retard their growth [33]
.
Inoculum size in the studied range had significant impact on tannase production. From
Figure 4(C), it was found that an inoculum size of 1.0 ml gave the maximum tannase
yield, when the content of wheat bran was 5 g. A smaller or larger volume of inoculum
led to decrease in tannase synthesis as it may be insufficient for complete use of the
available substrate to the mycelial growth and enzyme synthesis when a small volume of
inoculum was used [28, 34]
, and increases in the depletion of nutrients may occur when the
inoculum size was above 1.0 ml[35]
.
As for the effect of solid-liquid ratio on tannase production, it can be seen from Figure
4(C) that the maximum amount of tannase production (12.98U/gds) was attained when
the ratio of wheat bran to salt solution was 1:1. With a high level of solid content, the
liquid volume may not be sufficient for complete leaching of the product from the
fermented biomass, resulting in a decrease of enzyme activity. Likewise, the enzyme
activity may decrease with a high volume of liquid, as the oxygen supply for microbial
growth in the culture medium may decline in such condition[30]
.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
14
3.3. Aqueous Two-Phase Extraction
3.3.1. Phase Diagrams
In order to predict the volume and composition of the two phases, phase diagrams for
PEG/sodium citrate ATPSs with different PEG molecular weight (MW 600, 1000, 4000
and 6000g/mol) were constructed, as shown in Figure 5. It is evident from the figure that
an increase in the PEG molecular weight led to lower PEG concentrations required for
phase separation, and binodal curves became more asymmetric and close to the origin.
We inferred that this may be caused by the increase in the incompatibility between the
system components due to the more hydrophobic character of PEGs of higher molecular
weight.
3.4.2. Selection Of System Type And Phase-Forming Salt
In general, there are two major types of ATPS, namely polymer/polymer system and
polymer/salt system. ATPSs composed of a polymer (e.g. PEG) and a salt (e.g. phosphate)
have been widely used and are an attractive alternative to polymer/polymer systems due
to the use of inexpensive phase components [36]
. Additionally, polymer/salt systems have
a relatively lower phase viscosity, which enhances the segregation of the two phases,
meaning that time for phase equilibrium can be saved. These advantages of polymer/salt
systems over polymer/polymer systems could be highly advantageous in industrial
processes [37]
. For this reason, polymer/salt system was selected in our work for tannase
purification.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
15
After selecting the type of system, we attempted to find out the most suitable salt for
partitioning of the enzyme. The effects of different salts on enzyme activity recovery
were studied using four different salts, namely ammonium sulphate, magnesium sulphate,
dipotassium phosphate and sodium citrate. In this step, crude enzyme extract was mixed
with the same volume of 30% (w/w) salt solution, kept at room temperature for
approximately 20 min, and then analyzed for enzyme activity. The results are shown in
Table 1. Compared with other salts, sodium citrate exhibited good compatibility for the
enzyme, as is evident from the highest recovery of activity (92.36%). Though magnesium
sulphate has been frequently used as the phase-forming salt of ATPS, it was found to be
unsuitable in this study because of the turbidity formed in the activity assay process,
probably due to the reaction of MgSO4 with KOH, forming the insoluble compound, Mg
(OH)2. Hence, sodium citrate was selected as phase-forming salt for further studies.
3.3.3. Effect Of PEG Molecular Weight
In order to select the most suitable molecular weight of PEG for purification of tannase,
various ATPSs having PEG of different molecular weights (MW 600, 1000, 4000, and
6000) and sodium citrate were employed for partitioning experiments. Other parameters
such as total phase composition, temperature and pH of all the systems were kept
constant. The results are presented in Figure 6 and Table 2. In all the systems, Ke values
were above 1.0, which means that the target enzyme was preferentially partitioned to the
top phase. This is dissimilar to the finding of Rodríguez-Durán et al. [16]
who found that
tannase was partially purified in the bottom phase. Notwithstanding, the target enzyme
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
16
partitions to the top PEG-rich phase represents a technical advantage, as it is possible to
recover the polymer from the system by inducing the formation of a new bottom phase,
offering to the biomolecule a new possibility of migration, which assure the low-cost of
the purification process [38]
. It should be noted that the behavior of a particular
biomolecule in ATPS is rather unique since the chemical and physical interactions
involved in the partitioning process are very complex.
The partition coefficients of enzyme (Ke) and total protein (Kp) were found to decrease
with an increase in molecular weight of the PEG (Figure 6). It can be observed from
Table 2 that the enzyme activity recovery as well as purification fold of systems with
PEG 600 and 1000 was better than the systems with higher PEG molecular weight (PEG
4000 and 6000). These observations could be interpreted in terms of excluded volume
effect and hydrophobicity of the PEG molecule. With an increase in the molecular weight
of the PEG, the proteins to be partitioned in the system were subjected to a stronger
excluded volume effect imposed by the high molecular PEG. In other words, the free
volume in the PEG-rich phase (top-phase) significantly decreases with the increase in
PEG molecular weight. As a result, most of the biomolecules in the system selectively
partitioned to the bottom phase. On the other hand, as the molecular weight of the PEG
increases, the hydrophobic groups/hydrophobic area ratio decreases, resulting in an
increase in hydrophobicity [39]
. Consequently, the target enzyme as well as contaminating
proteins partitioned to the bottom phase.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
17
Table 2 shows that activity recovery of the systems with PEG 600 and PEG 1000 were
close; however, the latter was considered as the better one since the purification fold
(2.07-fold) of which was higher. The incommensurate tendency of the Ke and Kp of the
two systems (Figure 6) indicates that the PEG with low molecular weight is of poor
selectivity (S=Ke /Kp). Hence, PEG 1000 was selected for further studies.
3.3.4. Effect Of Ph
In order to evaluate the effect of pH on partition and purification, experiments were
carried out using the PEG1000/sodium citrate (20%/20%, w/w) system at different pH
values. The range of pH of the ATPSs was chosen as 3.0~8.0 since the pH stability of
tannase is around 3.5~8.0 [40]
. The results are shown in Table 3. When the partitioning
experiments were performed at pH 3.0 and 4.0, no phase separation was observed. This
finding illustrates that a higher concentration of phase-forming components is needed for
phase separation in the systems at low pH value. This interpretation can also be affirmed
by the finding of Marcos et al. [21]
who found that although the shape of the binodal lines
was similar for systems at different pH values, the tie line length for systems with the
same composition increased with increasing pH. From Table 3, the highest tannase
activity recovery (78.41%) and purification fold (1.92-fold) were attained at pH 7.0.
Hence, the pH value of 7.0 was selected for further studies.
3.3.5. Effect Of Different Stability Ratios
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
18
To identify the most suitable stability ratio for tannase purification, experiments were
performed using PEG1000/sodium citrate systems of different stability ratios, at pH 7.0.
The results are shown in Table 4. An increase in the specific activity was observed as
stability ratio increased from 0.0625 to 0.1176, and the stability ratio of 0.1176 gave
maximum activity recovery (77.17%) with a purification fold of 2.74. Further increase in
stability ratio from 0.1176 to 0.2500 resulted in decreases in activity recovery and
specific activity. The excluded volume theory shows that increase in the PEG
concentration or its molecular weight induces a decrease of the protein solubility in the
phase where the protein is located. With the increase in the stability ratio, the
concentration of PEG is increased, which led to the increase of excluded volume effect.
Thus, the activity recovery as well as purification fold was lowered with further increase
in the stability ratio above 0.1176.
4. CONCLUSIONS
A. ficuum Gim 3.6 has been proved to possess metabolic ability to degrade tannic acid
and produce a relatively high yield of extracellular tannase under the solid state
fermentation. The production of tannase reached maximum at 60 h of incubation and
addition of 2.0% (w/v) tannic acid as inducer, 1 ml of inoculum size and 1:1 of
solid-liquid ratio at temperature of 30oC and pH of 5.0.
The partial purification of crude tannase in ATPS was attempted. PEG1000/sodium citrate
system was found to be the most suitable system. The best result of purification
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
19
(2.74-fold) with an activity recovery of 77.17 % was obtained in the PEG1000/sodium
citrate system having 17% (w/w) of sodium citrate and 18.18% (w/w) of PEG 1000, at
pH 7.0. These results demonstrate that ATPE could be an effective technique for the
partial purification of tannase.
ACKNOWLEDGMENT
This work was supported by Guangxi Natural Science Foundation
(2010GXNSFC013004).
REFERENCES
1. Selwal, M.K.; Yadav, A.; Selwal, K.K.; Aggarwal, N.K.; Gupta, R.; Gautam, S.K.
Tannase production by Penicilliumatramentosum KM under SSF and its applications in
wine clarification and tea cream solubilization. Braz. J. Microbiol. 2011, 42, 374-387.
2. Aoki, K.; Shinke, R.; Nishira, H. Purification and some properties of yeast tannase.
Agric. Biol. Chem. 1976, 40, 79-85.
3. Taskin, M. (2013) Co-production of tannase and pectinase by free and immobilized
cells of the yeast Rhodotorulaglutinis MP-10 isolated from tannin-rich persimmon
(Diospyros kaki L.) fruits. Bioprocess Biosyst. Eng. 2013, 36, 165-172.
4. Darah, I.; Ong, C.B.; Jain, K.; Lim, S.H. Enhancement of tannase production on
submerged fermentation by red yeast Rhodotorulaglutinis DB2. J. Pure Appl. Microbiol.
2013, 7, 1525-1534.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
20
5. Mondal, K.C.; Banerjee, R.; Pati, B.R. Tannase production by Bacillus licheniformis.
Biotechnol. Lett. 2000, 22, 767-769.
6. Selwal, M.K.; Yadav, A.; Selwal, K.K.; Aggarwal, N.K.; Gupta, R.; Gautam, S.K.
Optimization of cultural conditions for tannase production by Pseudomonas aeruginosa
IIIB 8914 under submerged fermentation. World J. Microbiol. Biotechnol. 2010, 26,
599-605.
7. Raghuwanshi, S.; Dutt, K.; Gupta, P.; Misra, S.; Saxena, P.K.; Bacillus sphaericus: The
highest bacterial tannase producer with potential for gallic acid synthesis. J. Biosci.
Bioeng. 2011, 111, 635-640.
8. Sivashanmugam, K.; Jayaraman, G. Production and partial purification of extracellular
tannase by Klebsiellapneumoniae MTCC 7162 isolated from tannery effluent. Afr. J.
Biotechnol. 2013, 10, 1364-1374.
9. Lekha, P.K.; Lonsane, B.K. Production and application of tannin acyl hydrolase: state
of the art. Adv. Appl. Microbiol. 1997, 44, 215-260.
10. Belur, P. D.; Mugeraya, G. Microbial production of tannase: state of the art. Res. J.
Microbiol. 2011, 6, 25-40.
11. Fernandez-Lorente, G.; Bolivar, J.M.; Rocha-Martin, J.; Curiel, J.A.; Muñoz, R.; de
las Rivas, B.; Carrascosa, A.V.; Guisan, J.M. Synthesis of propyl gallateby
transesterification of tannic acid in aqueous media catalysed by immobilised derivatives
of tannase from Lactobacillus plantarum.Food Chem. 2011, 128, 214-217.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
21
12. Chhokar, V.; Seema; Beniwal, V.; Salar, R.K.; Nehra, K.S.; Kumar, A.; Rana, J.S.
Purification and characterization of extracellular tannin acyl hydrolase from
Aspergillusheteromorphus MTCC 8818. Biotechnol. Bioproc. E 2010, 15, 793-799.
13. Sharma, S.; Agarwal, L.; Saxena, R.K. Purification, immobilization and
characterization of tannase from Penicillium variable. Bioresour. Technol. 2008, 99,
2544-2551.
14. Battestin, V.; Macedo, G.A. Purification and biochemical characterization of tannase
from a newly isolated strain of Paecilomycesvariotii. Food Biotechnol. 2007, 21, 207-216
15. Mahapatra, K.; Nanda, R.K.; Bag, S.S.; Banerjee, R.; Pandey, A.; Szakacs, G.
Purification, characterization and some studies on secondary structure of tannase from
Aspergillusawamorinakazawa. Process Biochem. 2005, 40, 3251-3254.
16. Rodríguez-Durán, L.V.; Spelzini, D.; Boeris, V.; Aguilar, C.N.; Picó, G.A. Partition in
aqueous two-phase system: its application in downstream processing of tannase from
Aspergillusniger. Colloids Surf. B 2013, 11, 392-397.
17. Marcos, J.C.; Fonseca, L.P.; Ramalho, M.T.; Cabral, J.M.S. Partial purification of
penicillin acylase from Escherichia coli in poly (ethylene glycol)-sodium citrate aqueous
two-phase systems. J. Chromatogr. B Biomed Sci. Appl. 1999, 734, 15-22.
18. Azevedo, A.M.; Gomes, A.G.; Rosa, P.A.J.; Ferreira, I.F.; Pisco, A.M.M.O.;
Aires-Barros, M.R. Partitioning of human antibodies in polyethylene glycol-sodium
citrate aqueous two-phase systems. Sep. Purif. Technol. 2009, 65, 14-21.
19. Porto, T.S.; Medeiros e Silva, G.M.; Porto, C.S.; Cavalcanti, M.T.H.; Neto, B.B.;
Lima-Filho, J.L.; Converti, A.; Porto, A.L.F.; Pessoa Jr, A. Liquid-liquid extraction of
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
22
proteases from fermented broth by PEG/citrate aqueous two-phase system. Chem. Eng.
Process 2008, 47, 716-721.
20. Tubío, G.; Nerli, B.; Picó, G. Partitioning features of bovine trypsin and
α-chymotrypsin in polyethyleneglycol-sodium citrate aqueous two-phase systems. J.
Chromatogr. B 2007, 852, 244-249.
21. Zhang, W.; Hu, Y.; Wang, Y.; Han, J.; Ni, L.; Wu, Y. Liquid-liquid equilibrium of
aqueous two-phase systems containing poly (ethylene glycol) of different molecular
weights and several ammonium salts at 298.15 K. Thermochim. Acta. 2013, 560, 47-54.
22. Zhou, Y.J.; Hu, C.L.; Wang, N.; Zhang, W.W.; Yu, X.Q. Purification of porcine
pancreatic lipase by aqueous two-phase systems of polyethylene glycol and potassium
phosphate. J. Chromatogr. B 2013, 926, 77-82.
23. Sharma, S.; Bhat, T.K.; Dawra, R.K. A spectrophotometric method for assay of
tannase using rhodanine. Anal. Biochem. 2000, 279, 85-89.
24. Bradford, M.M. A rapid and sensitive method for the quantitation of microgram
quantities of protein utilizing the principle of protein-dye binding. Anal. Biochem. 1976,
72, 248-254.
25. Jana, A.; Halder, S.K.; Banerjee, A.; Paul, T.; Pati, B.R.; Mondal, K.C.; Das
Mohapatra, P.K. Biosynthesis, structural architecture and biotechnological potential of
bacterial tannase: A molecular advancement. Bioresour. Technol. 2014, 157, 327-340.
26. Rodrigues, T.H.S.; Pinto, G.A.S.; Gonçalves, L.R.B. Effects of inoculum
concentration, temperature, and carbon sources on tannase production during solid state
fermentation of cashew apple bagasse. Biotechnol. Bioproc. E 2008, 13, 571-576.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
23
27. Podrigues, T.H.S.; Dantas, M.A.A.; Pinto, G.A.S.; Gonçalves, L.R.B. Tannase
production by solid state fermentation of cashew apple bagasse. Appl. Biochem.
Biotechnol. 2007, 137-140, 675-788.
28. Sabu, A.; Pandey, A.; JaafarDaud, M.; Szakacs, G. Tamarind seed powder and palm
kernel cake: two novel agro residues for the production of tannase under solid state
fermentation by Aspergillusniger ATCC 16620. Bioresour. Technol. 2005, 96, 1223-1228.
29. Kar, B.; Banerjee, R.; Bhattacharyya, B.C. Microbial production of gallic acid by
modified solid state fermentation. J. Ind. Microbiol. Biotechnol. 1999, 23, 173-177.
30. Manjit; Yadav, A.; Aggarwal, N.K.; Kumar, K.; Kumar, A. Tannase production by
Aspergillusfumigatus MA under solid-state fermentation. World J. Microbiol. Biotechnol.
2008, 24, 3023-3030.
31. Batra, A.; Saxena, R.K. Potential tannase producers from the genera Aspergillus and
Penicillium. Process Biochem. 2005, 40, 1553-1557.
32. Mukherjee, G.; Banerjee, R. Effects of temperature, pH and additives on the activity
of tannase produced by a co-culture of Rhizopusoryzae and Aspergillus foetidus. World J.
Microbiol. Biotechnol. 2006, 22, 207-212.
33. Jana, A.; Maity, C.; Halder, S.K.; Mondal, K.C.; Pati, B.R.; Das Mohapatra, P.K.
Tannase production by Penicilliumpurpurogenum PAF6 in solid state fermentation of
tannin-rich plant residues following OVAT and RSM. Appl. Biochem. Biotechnol. 2012,
167, 1254-1269.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
24
34. Mukherjee, G.; Banerjee, R. Biosynthesis of tannase and gallic acid from tannin rich
substrates by Rhizopusoryzae and Aspergillusfoetidus. J. Basic Microbio. 2004, 44,
42-48.
35. Beniwal, V.; Rajesh; Goel, G.; Kumar, A.; Chhokar, C. Production of tannase through
solid state fermentationusing Indian Rosewood (DalbergiaSissoo) sawdust-a timber
industry waste. Ann. Microbiol. 2013, 63, 583-590.
36. Azevedo, A.M.; Rosa, P.A.J.; Ferreira, I.F.; Aires-Barros, M.R. Chromatography-free
recovery of biopharmaceuticals through aqueous two-phase processing. Trends
Biotechnol. 2009, 27, 240-247.
37. Louros, C.L.S.; Cláudio, A.F.M.; Neves, C.M.S.S.; Freire, M.G.; Marrucho, I.M.;
Pauly, J.; Coutinho, J.A.P. Extraction of biomolecules using phosphonium-based ionic
liquids + K3PO4 aqueous biphasic systems. Int. J. Mol. Sci. 2010, 11, 1777-1791.
38. Mazzola, P.G.; Lopes, A.M.; Hasmann, F.A.; Jozala, A.F.; Penna, T.C.V.;
Magalhaes, P.O.; Rangel-Yagui, C.O.; Pessoa-Jr, A. Liquid-liquid extraction of
biomolecules: an overview and update of the main techniques. J. Chem. Technol.
Biotechnol. 2008, 83, 143-157.
39. Asenjo, J.A.; Andrews, B.A. Aqueous two-phase systems for protein separation: A
perspective. J. Chromatogr. A 2011, 1218, 8826-8835.
40. Aguilar, C.N.; Gutiérrez-Sánchez, G. Review: Sources, properties, applications and
potential uses of tannin acyl hydrolase. Food Sci. Technol. Int. 2001, 7, 373-382.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
25
TABLE 1 Activity recovery of tannase using different salts
Salt Enzyme activity recovery (%) pH
Ammonium sulphate 47.66 5.0
Magnesium sulphate _* 5.8
Dipotassium phosphate 83.18 7.2
Sodium citrate 92.36 7.8
*Activity could not be determined due to the turbidity formation after the addition of
KOH solution to the reaction mixture.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
26
TABLE 2 Effect of PEG molecular weight on tannase partitioning
PEG
MW
Total activity
(U)
Total
protein
(mg)
Specific
activity
(U/mg)
Activity
recovery (%)
Purification
fold
600 1.03 0.19 5.42 76.30 1.48
1000 0.98 0.13 7.54 72.59 2.07
4000 0.86 0.18 4.78 63.70 1.31
6000 0.77 0.20 3.85 57.04 1.05
Crude 1.35 0.37 3.65 100 1
Phase system: PEG/sodium citrate, 16%/20% (w/w), at 23 oC, pH 7.8.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
27
TABLE 3 Effect of pH on tannase partitioning
pH Total
activity
(U)
Total
protein
(mg)
Specific
activity
(U/mg)
Activity
recovery
(%)
Purification
fold
5.0 0.61 0.21 2.90 69.32 0.73
6.0 0.65 0.09 7.22 73.86 1.81
7.0 0.69 0.09 7.67 78.41 1.92
8.0 0.60 0.08 7.50 68.18 1.88
Crude 0.88 0.22 4.00 100 1
Phase system: PEG1000/sodium citrate, 20%/20% (w/w), at 23 oC.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
28
TABLE 4 Effect of different stability ratios on tannase partitioning
Phase
composition
(w/w, %)
Run Stability
ratio
PEG Sodium
citrate
Total
activit
y (U)
Total
protei
n
(mg)
Specifi
c
activity
(U/mg)
Activity
recover
y (%)
Purificatio
n fold
B 0.0625 16 17.11 0.88 0.09 9.78 69.29 2.46
C 0.1176 17 18.18 0.98 0.09 10.89 77.17 2.74
D 0.1667 18 19.25 0.97 0.12 8.08 76.38 2.04
E 0.2500 20 21.39 0.95 0.16 5.94 74.80 1.50
Crude 1.27 0.32 3.97 100 1
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
29
FIGURE 1 Illustration of stability ratio in PEG1000/sodium citrate ATPS. O: original
point; A: point on the binodal curve; B, C, D, and E: selected ATPS points. The stability
ratio values of B, C, D, and E are 0.0625, 0.1176, 0.1667 and 0.2500, respectively. The
corresponding compositions of these operating points are B (16, 17.11), C (17, 18.18), D
(18, 19.25), and E (20, 21.39), respectively. The abscissa and ordinate represent the
concentration (w/w) of sodium citrate and PEG1000 in the APTS, respectively.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
30
FIGURE 2 Schematic diagram of tannase assay method according to Sharma et al. [23].
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
31
FIGURE 3 (A) TCL profile of degradation of tannic acid by A. ficcum Gim 3.6.
GA-galic acid, PA- pyrogallol; (B) Proposed pathway for tannic acid degradation by A.
ficcum Gim 3.6.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
32
FIGURE 4 Effects of various parameters on tannase production. (A) Incubation period (h)
and incubation temperature (oC), (B) Initial pH and tannic acid concentration (%, w/v),
(C) Inoculum size (ml) and solid-liquid ratio.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
33
FIGURE 5 Phase diagrams for PEG/sodium citrate ATPSs with different PEG molecular
weight.
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4
Accep
ted M
anus
cript
34
FIGURE 6 Effect of PEG molecular weight on partition coefficient of tannase (Ke) and
total protein (Kp).
Dow
nloa
ded
by [
Mon
tana
Sta
te U
nive
rsity
Boz
eman
] at
03:
40 1
8 A
ugus
t 201
4