Product overview
Product overview
Edition 2011/03
All technical data are correct at thetime of going to print.
All texts, representations,illustrations and drawings includedin this catalogue are the intellectualproperty of Festo AG & Co. KG,and are protected by copyrightlaw. All rights reserved, includingtranslation rights. No part of thispublication may be reproducedor transmitted in any form or byany means, electronic, mechanical,photocopying or otherwise, withoutthe prior written permission of FestoAG & Co. KG.
All technical data are subject tochange according to technicalupdates.
Festo AG & Co. KGP.O. Box73726 EsslingenRuiter Strasse 8273734 EsslingenGermany
Table of contents
Pneumatic drives 8 Sensors 84
Servopneumatic positioningsystems
28 Compact vision systems 95
Electromechanical drives 32 Compressed air preparation 97
Motors and controllers 37Pneumatic connectiontechnology
113
Grippers 42Electrical connectiontechnology
123
Handling systems 48Control technology andsoftware
136
Vacuum technology 53 Other pneumatic devices 139
Valves 57 Ready-to-install solutions 141
Valve terminals 79 Services 147
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 3
The systematically faster route to the right solution
It�s so easy:
1. Select the product groupyou require from the Table ofcontents 3.Eg.: Electromechanical
drives 32
2. Find the products you wanton the product pages usingthe technical features anddescriptions.
3. The blue arrow directs you tothe search term with which youcan find all product informationand process your order onthe Internet. Simply appendthe search term or type to theInternet address.Example: using search term:
Internet:www.festo.com/catalogueSpindleaxisExample: using type:
Internet:www.festo.com/catalogueegc-bs
Are you already in the productcatalogue?Enter the search term inthe search field next to themagnifying glass.
You can also search offline. Theelectronic product cataloguecan be found on the DVD insidethe cover. Follow the installationinstructions next to the DVD.
The electronic productcatalogue offers additionalproductivity-boostingapplications. See page 6for more information.
4. Should you require individuallytailored advice, you can findcontact details on the next page.
4 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
Festo worldwide
ArgentinaFesto S.A.Edison 2392(1640) MartínezProv. Buenos AiresTel. +54 (011) 4717 82 00,Fax +54 (011) 47 17 82 82E-mail: [email protected]
AustraliaFesto Pty. Ltd.Head Office (Melbourne)179-187 Browns RoadP.O. Box 261Noble Park Vic. 3174Call Toll Free 1300 88 96 96Fax Toll Free 1300 88 95 95Tel. +61(0)3 97 95 95 55, Fax +61(0)3 97 95 97 87E-mail: [email protected]
AustriaFesto Gesellschaft m.b.H.Linzer Straße 2271140 WienTel. +43 (0)1 910 75-0, Fax +43 (0)1 910 75-250E-mail: [email protected]
BelarusIP FestoMasherov avenue, 78220035 MinskTel. +375 (0)17 204 85 58,Fax +375 (0)17 204 85 59E-mail: [email protected]
BelgiumFesto Belgium sa/nvRue Colonel Bourg 1011030 Bruxelles/BrusselTel. +32 (0)2 702 32 11, Fax +32 (0)2 702 32 09E-mail: [email protected]
BrazilFesto Brasil LtdaRua Guiseppe Crespi, 76KM 12,5 - Via Anchieta04183-080 São Paulo SP-BrazílTel. +55 (0)11 50 13 16 00,Fax +55 (0)11 50 13 18 68E-mail: [email protected]
BulgariaFesto EOOD1592 SofiaBul. Christophor Kolumb 9Tel. +359 (0)2 960 07 12, Fax +359 (0)2 960 07 13E-mail: [email protected]
CanadaFesto Inc.5300 Explorer DriveMississauga, Ontario L4W 5G4Tel. +1 (0)905 624 90 00, Fax +1 (0)905 624 90 01E-mail: [email protected]
ChileFesto S.A.Avenida Américo Vespucio, 760PudahuelSantiagoTel. +56 2 690 28 00, Fax +56 2 690 28 60E-mail: [email protected]
ChinaFesto (China) Ltd.1156 Yunqiao Road,Jinqiao Export Processing Zone,Pudong,201206 ShanghaiTel. +86 21 60 81 51 00, Fax +86 21 58 54 03 00E-mail: [email protected]
ColombiaFesto Ltda.Autopista Bogotá - Medellín Km 6 (costado sur)Tenjo, CundinamarcaTel. +57 (1) 865 77 88,Fax +57 (1) 865 77 88 Ext.287E-mail: [email protected]
CroatiaFesto d.o.o.Nova Cesta 18110000 ZagrebTel. +385 (0)1 619 19 69, Fax +385 (0)1 619 18 18E-mail: [email protected]
Czech RepublicFesto, s.r.o.Modřanská 543/76147 00 Praha 4Tel. +420 261 09 96 11, Fax +420 241 77 33 84E-mail: [email protected]
DenmarkFesto A/SIslevdalvej 1802610 RødovreTel. +45 70 21 10 90, Fax +45 44 88 81 10E-mail: [email protected]
EstoniaFesto OY AB Eesti FiliaalLaki 11B12915 TallinnTel. +372 666 15 60, Fax +372 666 15 61E-mail: [email protected]
FinlandFesto OYMäkituvantie 9P.O. Box 8601511 VantaaTel. +358 (09) 87 06 51, Fax +358 (09) 87 06 52 00E-mail: [email protected]
FranceFesto EurlZA des Maisons Rouges8 rue du clos sainte Catherine94360 Bry-sur-MarneTel. +33 (0) 820 20 46 40 (numéro indigo),Fax +33 (0) 820 20 46 41E-mail: [email protected]
GermanyFesto AG & Co. KGPostfach73726 EsslingenRuiter Straße 8273734 EsslingenTel. +49 (0)711 347 0, Fax +49 (0)711 347 26 28E-mail: [email protected]
GreeceFesto Ltd.40 Hamosternas Ave.P.C. 11853 AthensTel. +30 210 341 29 00, Fax +30 210 341 29 05E-mail: [email protected]
Hong KongFesto Ltd.6/F New Timely Factory Building,497 Castle Peak Road,Kowloon, Hong KongTel. + 852 27 43 83 79, Fax + 852 27 86 21 73E-mail: [email protected]
HungaryFesto Kft.Csillaghegyi út 32-34.1037 BudapestHotline +36 1 436 51 00Tel. +36 1 436 51 11, Fax +36 1 436 51 01E-mail: [email protected]
IndiaFesto Controls Private Ltd.237B,Bommasandra Industrial Area,Bangalore Hosur Highway,Bangalore 560 099Tel. +91 (0)80 22 89 41 00,Fax +91 (0)80 27 83 20 58 / 27 83 33 62E-mail: [email protected]
IndonesiaPT. FestoJL. Sultan Iskandar Muda No. 68Arteri Pondok IndahJakarta 12240Tel. +62 (0)21 27 50 79 00,Fax +62 (0)21 27 50 79 98E-mail: [email protected]
IranFesto Pneumatic S.K.# 2, 6th street, 16th avenue,Km 8, Special Karaj RoadP.O.Box 15815-1485Teheran 1389793761Tel. +98 (0)21 44 52 24 09,Fax +98 (0)21 44 52 24 08E-mail: [email protected]
IrelandFesto LimitedUnit 5 Sandyford ParkSandyford Industrial EstateDublin 18Tel. +353 (0)1 295 49 55, Fax +353 (0)1 295 56 80E-mail: [email protected]
IsraelFesto Pneumatic Israel Ltd.P.O. Box 1076Ha'atzma'ut Road 48Yehud 56100Tel. +972 (0)3 632 22 66, Fax +972 (0)3 632 22 77E-mail: [email protected]
ItalyFesto SpAVia Enrico Fermi 36/3820090 Assago (MI)Tel. +39 02 45 78 81, Fax +39 02 488 06 20E-mail: [email protected]
JapanFesto K.K.1-26-10 HayabuchiTsuzuki-kuYokohama 224-0025Tel. +81 (0)45 593 56 10 / -5611,Fax +81 (0)45 593 56 78E-mail: [email protected]
Korea SouthFesto Korea Co., Ltd.470-1 Gasan-dongGeumcheon-guSeoul #153-803Tel. +82 (0)2 850 71 14, Fax +82 (0)2 864 70 40E-mail: [email protected]
LatviaFesto SIAA. Deglava iela 601035 RigaTel. +371 67 57 78 64, Fax +371 67 57 79 46E-mail: [email protected]
LithuaniaFesto, UABPartizanų 63M50306 KaunasLietuvaTel. +370 (8)7 32 13 14, Fax +370 (8)7 32 13 15E-mail: [email protected]
MalaysiaFesto Sdn. Berhad10 Persiaran IndustriBandar Sri DamansaraWilayah Persekutuan52200 Kuala LumpurTel. +60 (0)3 62 86 80 00, Fax +60 (0)3 62 75 64 11E-mail: [email protected]
MexicoFesto Pneumatic, S.A.Av. Ceylán 3,Col. Tequesquináhuac54020 TlalnepantlaEstado de MéxicoTel. +52 (01)55 53 21 66 00,Fax +52 (01)55 53 21 66 55E-mail: [email protected]
NetherlandsFesto B.V.Schieweg 622627 AN DelftTel. +31 (0)15 251 88 99, Fax +31 (0)15 251 88 67E-mail: [email protected]
New ZealandFesto Ltd.20 Fisher CrescentMount WellingtonAucklandTel. +64 (0)9 574 10 94, Fax +64 (0)9 574 10 99E-mail: [email protected]
NigeriaFesto Automation Ltd.Motorways Centre, First Floor, Block CAlausa, Ikeja,LagosTel. +234 (0)1 794 78 20, Fax +234 (0)1 555 78 94E-mail: [email protected]
NorwayFesto ASOle Deviks vei 20666 OsloTel. +47 22 72 89 50, Fax +47 22 72 89 51E-mail: [email protected]
PeruFesto S.R.L.Amador Merino Reyna 480San IsidroLimaTel. +51 (1) 219 69 60, Fax +51 (1) 219 69 71E-mail: [email protected]
PhilippinesFesto Inc.Festo BuildingKM 18, West Service RoadSouth Superhighway1700 Paranaque CityMetro ManilaTel. +63 (0)2 776 68 88, Fax +63 (0)2 823 42 19E-mail: [email protected]
PolandFesto Sp. z o.o.Janki k/Warszawyul. Mszczonowska 705090 RaszynTel. +48 (0)22 711 41 00, Fax +48 (0)22 711 41 02E-mail: [email protected]
PortugalFesto � Automação, Unipessoal, Lda.Rua Manuel Pinto De Azevedo, 567Apartado 80134109-016 PortoContact Center: 707 20 20 43Tel. +351 22 615 61 50, Fax +351 22 615 61 89E-mail: [email protected]
RomaniaFesto S.R.L.St. Constantin 17010217 BucurestiTel. +40 (0)21 310 31 90, Fax +40 (0)21 310 24 09E-mail: [email protected]
RussiaOOO Festo-RFMichurinskiy prosp., 49119607 MoscowTel. +7 495 737 34 00, Fax +7 495 737 34 01E-mail: [email protected]
SingaporeFesto Pte. Ltd.6 Kian Teck WaySingapore 628754Tel. +65 62 64 01 52, Fax +65 62 61 10 26E-mail: [email protected]
SlovakiaFesto spol. s r.o.Gavlovicová ul. 183103 Bratislava 3Tel. +421 (0)2 49 10 49 10,Fax +421 (0)2 49 10 49 11E-mail: [email protected]
SloveniaFesto d.o.o. LjubljanaIC Trzin, Blatnica 81236 TrzinTel. +386 (0)1 530 21 00, Fax +386 (0)1 530 21 25E-mail: [email protected]
South AfricaFesto (Pty) Ltd.22-26 Electron AvenueP.O. Box 255Isando 1600Tel. +27 (0)11 971 55 00, Fax +27 (0)11 974 21 57E-mail: [email protected]
SpainFesto Pneumatic, S.A.U.Avenida Granvia, 159Distrito Económico Granvia L'H08908 Hospitalet de LlobregatBarcelonaTel.: 901243660, Fax: 902243660Tel. +34 93 261 64 00, Fax +34 93 261 64 20E-mail: [email protected]
SwedenFesto ABStillmansgatan 1Box 21038200 21 MalmöTel. +46 (0)20 38 38 40, Fax +46 (0)40 38 38 10E-mail: [email protected]
SwitzerlandFesto AGMoosmattstrasse 248953 Dietikon ZHTel. +41 (0)44 744 55 44, Fax +41 (0)44 744 55 00E-mail: [email protected]
TaiwanFesto Co., Ltd.Head Office244509, Kung 8th RoadLinkou 2nd Industrial ZoneLinkou Dist., New Taipei CityTaiwan, R.O.C.Tel. +886 (0)2 26 01-92 81,Fax +886 (0)2 26 01 92 86-7E-mail: [email protected]
ThailandFesto Ltd.67/1 Phaholyothin Rd.,T. Klong 1, A. KlongluangPathumthani 12120Tel. +66 29 01 88 00, Fax +66 29 01 88 30E-mail: [email protected]
TurkeyFesto San. ve Tic. A.S.Tuzla Mermerciler OrganizeSanayi Bölgesi 6/1834956 Tuzla - Istanbul/TRTel. +90 (0)216 585 00 85,Fax +90 (0)216 585 00 50E-mail: [email protected]
UkraineFesto UkrainaDP Festovul. Borisoglebskaya,1104070, KievTel. +380 (0)44 239 24 30,Fax +380 (0)44 463 70 96E-mail: [email protected]
United KingdomFesto LimitedApplied Automation CentreCaswell RoadBrackmills Trading EstateNorthampton NN4 7PYTel. ++44 (0)1604 / 66 70 00,Fax ++44 (0)1604 / 66 70 01E-mail: [email protected]
United StatesFesto Corporation (New York)395 Moreland RoadP.O. Box 18023Hauppauge, NY 11788Call Toll-free 800/993 3786Fax Toll-free 800/963 3786Tel. +1(631) 435 08 00, Fax +1(631) 435 80 26E-mail: [email protected]
VenezuelaFesto C.A.Av. 23 esquina con calle 71N° 22-62, Edif. Festo.Sector ParaísoMaracaibo - VenezuelaTel. +58 (261) 759 11 20/759 41 20/759 44 38,Fax +58 (261) 759 04 55E-mail: [email protected]
VietnamFesto Co., Ltd (Cong Ty Tnhh Festo)No. 206 Tran Nao StreetWard Binh AnDistrict 2Ho Chi Minh CityTel. +84 (0)8 740 69 09, Fax +84 (0)8 740 69 10E-mail: [email protected]
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 5
Online or offline � get the ideal solution fast
Quick start � from product family toproductThere are three options available:1. Click on a product group1 or a
product photo. This brings youto a selection of products with alist 2 of technical features andthe buttons 3
� "Engineering" starts theselection and calculationsoftware
� "Documentation" providesdetailed information in PDFformat
� "Feature search" lets youfurther narrow down theproduct selection further
2. Full text search: Enter yoursearch term in the search field5. This can be made up ofcomplete or partial keywords,part numbers, type codes or
names of favourites. Dependingon your input, a selection ofproducts as described under 1.will be displayed or you will betaken directly to the product yousearched for. The search field5
saves your search terms.3. Quick link: Use the quick link
to bring you directly 4 to thedesired product family.
Retrieving information on theproductExplanation of the fields in theconfiguration window:1. Tab navigation 1:
� "Select features": Select theappropriate features here
� "Product list": Lists allproducts in the product group
2. Input field for order code2:Enter the exact order code here.
3. Other actions 3, which areavailable following a correctconfiguration:� "Add to basket": Adds yourproduct to the basket, seealso section �Export basket�and �Basket management�
� "2D/3D view": Creates a CADmodel, see section �ViewingCAD models�
� "Accessories": Lists suitableaccessories
� "Data Sheet": Contains allrelevant technical data
� "Display Overview": Displaysan overview of all selectedmodels.
4. Details 4:Here you will find informationsuch as part number, price,delivery time, product graphic,product illustration and circuitsymbol.
Product configuration for complexproducts1. Select the product
characteristics:� Navigate using the structure
1 or the tabs 4.� Using the tabs 4 from left toright, configure your productby selecting the desiredfeatures 3.
� The structure1 or the tabs4
give you a quick overview ofall selected features. Missingfeatures are marked with anexclamation mark 2 andincorrect features are markedin red. Clicking on the feature
takes you directly to it, so thatyou can then change it.
2. Graphical representation5:A dynamic graphic is constructedbased on your currentconfiguration.
3. Add the product to the basket:Once configuration is complete,you can add products to thebasket by clicking on "Add tobasket". Amessage is displayedto confirm that the product hasbeen added successfully. To findout how to initiate an order, seesection "Basket management"
6 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
Online or offline � get the ideal solution fast
New function: My favouritesYou can now save as many productconfigurations as you want asfavourites.To display the list of all savedfavourites 1:� Click on the "My favourites"tab 2. A table containing yoursaved favourites is displayed. Thedelivery time, name of favourite,part number, type code andthe button 4 for deleting thefavourite are also displayed.
� Double-clicking on a configurationrow or marking a row and clickingon the "Select features" tabbrings you to the correspondingconfiguration window 3.
� You can sort your favourites byclicking on the table header5.
� You can select multiple favouritesand compare them by clicking"Product compare" 6.
Viewing CAD modelsClicking on the "2D/3D view"button opens a window containinga CAD preview of the product. The"Export" function lets you exportthe files to your CAD system in thedesired format.
Exporting the basket contents ...1. � as a csv file:
To do this, click �Export� 1,select "Save as" in the windowthat opens and specify whereyou want to save it to. This filecan then be opened in Excel, forexample, and edited.
2. � to your choice of format:To do this, click "Settings" 3
and specify which information isto be exported.
Basket management1. Upload basket directly to the
online shop and place yourorder: To upload a basket
directly to the online shop,simply click on "Export toonline basket" 2. An Internetconnection is established andthe products are transferredto the online basket. Afterlogging in via "Login", your netprices and delivery times aredisplayed. Now just place yourorder and you�re done!
2. Initiate order: Simply print outyour basket and send it to Festoby fax or export it as an e-mail.
The detailed instructions "info_en.pdf" can be found on the DVD.
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 7
Pneumatic drives >
Software toolPneumatic dimensioning Perfect simulations replace expensive actual
tests.The tool is an expert system that supportsyou in the selection and configurationof the entire pneumatic control chain. Ifone parameter is changed, the programautomatically adapts all the others.This tool can be found in the electroniccatalogue for the product group, on thewebsite under Support in the Engineeringsoftware area or on the DVD under Selectionand sizing.
Standards-based cylinders
TypeMode ofoperation
Pistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning Description
Standardcylinder, roundcylinderDSNU, ESNU,DSN, ESN
Double-acting,Pushing,Single-acting
8 mm,10 mm,12 mm,16 mm,20 mm,25 mm,32 mm,40 mm,50 mm,63 mm
19 ... 1,870.3 N 1 ... 500 mm P: elasticcushioningrings/pads atboth ends,PPS: self-adjustingpneumaticend-positioncushioning,PPV:adjustablepneumaticcushioning atboth ends
� Standard cylinder DSNU, ESNU, DSN,ESN, piston diameter 8 ... 25 mm,conforms to ISO 6432
� Low-cost round cylinder DSNU, ESNU,piston diameter 32 ... 63 mm
� For position sensing: DSNU, ESNU� Without position sensing: DSN, ESN� Wide range of variants� Good running performance and longservice life
� Piston rod with male or female threadInternet: .../dsnu
StandardcylinderDSNUP
Double-acting 16 mm,20 mm,25 mm
121 ... 295 N 25 ... 100 mm P: elasticcushioningrings/pads atboth ends
� ISO 6432� Cost-optimised round cylinder� Wrought aluminium alloy cylinderbarrel
� Polyamide bearing and end caps� For position sensingInternet: .../dsnup
StandardcylinderDNCB
Double-acting 32 mm,40 mm,50 mm,63 mm,80 mm,100 mm
483 ... 4,712 N 2 ... 2,000 mm PPV:adjustablepneumaticcushioning atboth ends
� ISO 15552 (ISO 6431, VDMA 24562)� For position sensing� Saves up to 11% fitting spacecompared with ordinary standardcylinders
� Profile slot for proximity sensors andair connections on one side
� Proximity sensors fit flush in theprofile slot
� Male piston rod threadInternet: .../dncb
8 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
11
Pneumatic drives >
Standards-based cylinders
TypeMode ofoperation
Pistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning Description
StandardcylinderDNC
Double-acting 32 mm,40 mm,50 mm,63 mm,80 mm,100 mm,125 mm
415 ... 7,363 N 2 ... 2,000 mm P: elasticcushioningrings/pads atboth ends,PPV:adjustablepneumaticcushioning atboth ends
� ISO 15552 (ISO 6431, VDMA 24562)� For position sensing� Saves up to 11% fitting spacecompared with ordinary standardcylinders
� Wide range of variants� Profile slot for proximity sensors onthree sides
� No protruding proximity sensors� Male piston rod threadInternet: .../dnc
StandardcylinderDNG
Double-acting 32 mm,40 mm,50 mm,63 mm,80 mm,100 mm,125 mm,160 mm,200 mm,250 mm,320 mm
415 ... 48,250N
1 ... 2,000 mm PPV:adjustablepneumaticcushioning atboth ends
� ISO 15552 (ISO 6431, VDMA 24562)� Sturdy tie rod design� Proximity sensors mounted using kit� Wide range of accessoriesInternet: .../dng
StandardcylinderDSBF
Double-acting 32 mm,40 mm,50 mm,63 mm,80 mm,100 mm
415 ... 4,712 N 1 ... 2,800 mm PPS: self-adjustingpneumaticend-positioncushioning,PPV:adjustablepneumaticcushioning atboth ends
� ISO 15552 with increased corrosionprotection
� Resistant to standard cleaning agents� FDA-approved lubrication and sealingon the basic version
� Long service life thanks to optionalseal for unlubricated operation
� Hygienic mounting of the sensorspossible
� Comprehensive range of mountingaccessories for just about every typeof installationInternet: .../dsbf
Compact cylinderCDC
Double-acting 20 mm,25 mm,32 mm,40 mm,50 mm,63 mm,80 mm
141 ... 3,016 N 1 ... 500 mm P: elasticcushioningrings/pads atboth ends
� ISO 21287� Up to 50% less installation space thancomparable standard cylinder to ISO15552
� Easy-to-clean design� Increased corrosion protection� For position sensing� Wide range of variants� Piston rod with male or female threadInternet: .../cdc
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 9
11
Pneumatic drives >
Round cylinders
TypeMode ofoperation
Pistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning Description
Round cylinderEG
Pushing,Single-acting
6 mm,12 mm,16 mm,25 mm
17 ... 295 N 1 ... 80 mm None � Miniature cylinder� Good running performance� Male piston rod threadInternet: .../eg
Round cylinderEG-PK
Pushing,Single-acting
2.5 mm,4 mm,6 mm
1.7 ... 14 N 5... 25 mm None � Miniature cylinder with air connection� Barbed fitting connection for plastictubing with standard I.D.Internet: .../eg-pk
Stainless steel cylinders
TypeMode ofoperation
Pistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning Description
Standardcylinder, roundcylinderCRDSNU
Double-acting 12 mm,16 mm,20 mm,25 mm,32 mm,40 mm,50 mm,63 mm
51 ... 1,870 N 1 ... 500 mm P: elasticcushioningrings/pads atboth ends,PPS: self-adjustingpneumaticend-positioncushioning,PPV:adjustablepneumaticcushioning atboth ends
� Piston diameter 12 ... 25 mm,conforms to ISO 6432
� Corrosion-resistant in harsh ambientconditions
� Easy-to-clean design� Long service life thanks to optionalunlubricated operation seal
� For position sensing� Wide range of variants� Wide range of accessoriesInternet: .../crdsnu
StandardcylinderCRDNG, CRDNGS
Double-acting 32 mm,40 mm,50 mm,63 mm,80 mm,100 mm,125 mm
483 ... 7,363 N 10 ... 2,000mm
PPV:adjustablepneumaticcushioning atboth ends
� ISO 15552 (ISO 6431, VDMA 24562)� Corrosion-resistant in harsh ambientconditions
� Easy-to-clean design� Threaded mounting, mounting viaaccessories
� For position sensing� Variants: through piston rod,heat-resistant designInternet: .../crdng
Round cylinderCRDSW
Double-acting 32 mm,40 mm,50 mm,63 mm
483 ... 1,870 N 10 ... 500 mm P: elasticcushioningrings/pads atboth ends
� Corrosion-resistant in harsh ambientconditions
� Easy-to-clean design� For position sensing� Male piston rod threadInternet: .../crdsw
10 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
11
Pneumatic drives >
Stainless steel cylinders
TypeMode ofoperation
Pistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning Description
Round cylinderCRHD
Double-acting 32 mm,40 mm,50 mm,63 mm,80 mm,100 mm
483 ... 4,712 N 10 ... 500 mm PPV:adjustablepneumaticcushioning atboth ends
� Corrosion-resistant in harsh ambientconditions
� Easy-to-clean design, optimised forintensive demands
� Greater flexibility thanks to differentend caps
� For position sensing� Male piston rod threadInternet: .../crhd
Round cylinderCRDG
Double-acting 12 mm,16 mm,20 mm,25 mm,32 mm,40 mm,50 mm,63 mm
68 ... 1,870 N 10 ... 500 mm P: elasticcushioningrings/pads atboth ends
� Corrosion-resistant in harsh ambientconditions
� Easy-to-clean design� Threaded mounting, mounting viaslotted nut or hex nut
� For position sensing� Male piston rod threadInternet: .../crdg
Short-stroke cylinders and compact cylinders
TypeMode ofoperation
Pistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning Description
Compact cylinderADN, AEN
Double-acting,Pushing,Single-acting,Pulling
12 mm,16 mm,20 mm,25 mm,32 mm,40 mm,50 mm,63 mm,80 mm,100 mm,125 mm
51 ... 7,363 N 1 ... 500 mm P: elasticcushioningrings/pads atboth ends
� ISO 21287� Up to 50% less installation space thancomparable standard cylinder to ISO15552
� For position sensing� Piston rod with male or female thread� Wide range of variantsInternet: .../adn
Compact cylinderADNP
Double-acting 20 mm,25 mm,32 mm,40 mm,50 mm
188 ... 1,178 N 5 ... 80 mm P: elasticcushioningrings/pads atboth ends
� ISO 21287� Up to 50% less installation space thancomparable standard cylinder to ISO15552
� With polymer end cap and piston rodmade from aluminium
� Low-cost cylinder for standardapplications
� For position sensing� Piston rod with male or female threadInternet: .../adnp
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 11
11
Pneumatic drives >
Short-stroke cylinders and compact cylinders
TypeMode ofoperation
Pistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning Description
Short-strokecylinderADVC, AEVC
Double-acting,Pushing,Single-acting
4 mm,6 mm,10 mm,12 mm,16 mm,20 mm,25 mm,32 mm,40 mm,50 mm,63 mm,80 mm,100 mm
4.9 ... 4,712 N 2.5 ... 25 mm P: elasticcushioningrings/pads atboth ends
� Short-stroke cylinder with standardport pattern to VDMA 24562 from dia.32 mm
� Low space requirement� High clamping forces in a compact size� For position sensing with proximitysensor for T-slot and for C-slot
� Piston rod with male or female threadInternet: .../advc
Compact cylinderADVU, AEVU,AEVUZ
Double-acting,Pushing,Single-acting,Pulling
12 mm,16 mm,20 mm,25 mm,32 mm,40 mm,50 mm,63 mm,80 mm,100 mm,125 mm
42 ... 7,363 N 0 ... 400 mm P: elasticcushioningrings/pads atboth ends
� 50% less installation space thancomparable standard cylinder to ISO15552
� For position sensing� Wide range of variants� Piston rod with male or female threadInternet: .../advu
Flat cylinderDZF
Double-acting Equivalentdiameter,12 mm,18 mm,25 mm,32 mm,40 mm,50 mm,63 mm
51 ... 1,870 N 1 ... 320 mm P: elasticcushioningrings/pads atboth ends
� Extremely flat design� Protected against torsion thanks tospecial piston shape
� Ideal for block mounting� Wide range of installation options� For position sensing� Piston rod with male or female threadInternet: .../dzf
Flat cylinderDZH
Double-acting Equivalentdiameter,16 mm,20 mm,25 mm,32 mm,40 mm,50 mm,63 mm
104 ... 1,870 N 1 ... 1,000 mm PPV:adjustablepneumaticcushioning atboth ends
� Flat design� Protected against torsion thanks tospecial piston shape
� Ideal for block mounting� Wide range of installation options� For position sensing� Male piston rod threadInternet: .../dzh
Flat cylinderEZH
Pushing,Single-acting
Equivalentdiameter,1.5 mm,10 mm,2.5 mm,5 mm
3 ... 180 N 10 ... 50 mm None � Extremely flat design� Protected against torsion thanks tospecial piston shape
� Wide range of installation options� For position sensingInternet: .../ezh
12 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
11
Pneumatic drives >
Cartridge cylinders and multimount cylinders
TypeMode ofoperation
Pistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning Description
MultimountcylinderDMM, EMM,DMML, EMML
Double-acting,Pushing,Single-acting
10 mm,16 mm,20 mm,25 mm,32 mm
37 ... 483 N 1 ... 50 mm P: elasticcushioningrings/pads atboth ends
� Wide range of mounting options� Wide selection of piston rod variants� For position sensing� Male piston rod threadInternet: .../dmm
CartridgecylinderEGZ
Pushing,Single-acting
6 mm,10 mm,16 mm
13.9 ... 109 N 5 ... 15 mm None � Minimal fitting space� Installation with or without mountingattachments
� Male piston rod threadInternet: .../egz
Flanged cylinderDFK, EFK
Double-acting,single-acting,pushing
8 mm,10 mm,12 mm,16 mm,20 mm,25 mm
30 ... 295 N 10 ... 80 mm P: elasticcushioningrings/pads atboth ends
� Polymer design� Integrated mounting flange andconnection
� Male piston rod threadInternet: .../dfk
Cylinders with clamping unit
TypeMode ofoperation
Pistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning Description
StandardcylinderDSNU-KP
Double-acting 8 mm,10 mm,12 mm,16 mm,20 mm,25 mm
30... 295 N 1 ... 500 mm P: elasticcushioningrings/pads atboth ends,PPS: self-adjustingpneumaticend-positioncushioning,PPV:adjustablepneumaticcushioning atboth ends
� Piston rod can be held or clamped inany position
� Piston rod can be held in position forlong periods even with alternatingloads, fluctuating operating pressureor leaks in the system
� Mounting hole pattern to ISO 6432� For position sensingInternet: .../dsnu-kp
StandardcylinderDNC-KP
Double-acting 32 mm,40 mm,50 mm,63 mm,80 mm,100 mm,125 mm
415 ... 7,363 N 2 ... 2,000 mm P: elasticcushioningrings/pads atboth ends,PPV:adjustablepneumaticcushioning atboth ends
� Piston rod can be held or clamped inany position
� Piston rod can be held in position forlong periods even with alternatingloads, fluctuating operating pressureor leaks in the system
� Mounting hole pattern to ISO 15552� For position sensing� Wide range of variants� Piston rod with male or female threadInternet: .../dnc-kp
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 13
11
Pneumatic drives >
Cylinders with clamping unit
TypeMode ofoperation
Pistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning Description
Cylinder withclamping unitDNCKE, DNCKE-S
Double-acting 40 mm,63 mm,100 mm
754 ... 4,712 N 10 ... 2,000mm
PPV:adjustablepneumaticcushioning atboth ends
� Cylinder for holding, clamping andcushioning
� Mounting hole pattern to ISO 15552� Variant DNCKE-...-S approved forbraking tasks in safety-relevantcontrol systems of category 1
� Piston rod can be clamped in anyposition
� For position sensing� Male piston rod threadInternet: .../dncke
Compact cylinderwith clampingunitADN-KP
Double-acting 20 mm,25 mm,32 mm,40 mm,50 mm,63 mm,80 mm,100 mm
188 ... 4,712 N 10 ... 500 mm P: elasticcushioningrings/pads atboth ends
� Mounting hole pattern to ISO 21287� Piston rod can be held or clampedin any position during clamping,processing or handling operations
� For position sensing� Piston rod with male or female threadInternet: .../adn-kp
14 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
11
Pneumatic drives >
Software toolCalculation guide forpneumatic linear drives
Festo�s linear drives are known for deliveringmaximum force in minimum space. Byspecifying the project parameters such asmass or force, mounting position and travel,the software tool determines the optimumdrive configuration for you.The calculation software can be found on ourwebsite under Support in the Engineeringsoftware area or on the DVD under Selectionand sizing.
Rodless cylinders
TypePistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning
Positionsensing Description
Linear driveDGC
8 mm,12 mm,18 mm,25 mm,32 mm,40 mm,50 mm,63 mm
30 ... 1,870 N 1 ... 8,500 mm P: elasticcushioningrings/pads atboth ends,PPV:adjustablepneumaticcushioning atboth ends,YSR: shockabsorber, hardcharacteristiccurve,YSRW: shockabsorber, softcharacteristiccurve
Via proximitysensor
� Basic design, plain or recirculatingball bearing guides
� Optimised mounting options� High-precision guide� Optimised sealing system� All settings accessible from one side� Available with variable end stops andintermediate position module
� Exchangeable with DGPL thanks tofoot mountings
� Software tool available for bearingcalculationInternet: .../dgc
Linear driveDGP, DGPL
18 mm,25 mm,32 mm,40 mm,50 mm,63 mm,80 mm
153 ... 3,016 N 10 ... 3,000mm
PPV:adjustablepneumaticcushioning atboth ends,YSR: shockabsorber, hardcharacteristiccurve
Via proximitysensor
� Low space requirement� High precision and load capacity� Basic design, plain, recirculating ballbearing or heavy-duty guides
� Wide range of variantsInternet: .../dgp
Linear driveSLG
8 mm,12 mm,18 mm
30 ... 153 N 100 ... 900 mm P: elasticcushioningrings/pads atboth ends,YSR: shockabsorber, hardcharacteristiccurve
Via proximitysensor
� Extremely flat design� Integrated precision guide� Adjustable end stops� Choice of supply ports� Available with intermediate positionmoduleInternet: .../slg
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 15
11
Pneumatic drives >
Rodless cylinders
TypePistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning
Positionsensing Description
Linear driveDGO
12 mm,16 mm,20 mm,25 mm,32 mm,40 mm
68 ... 754 N 10 ... 4,000mm
P: elasticcushioningrings/pads atboth ends,PPV:adjustablepneumaticcushioning atboth ends
Via proximitysensor
� Magnetic force transmission� Pressure-tight and zero leakage� Dirt-proof and dust-proofInternet: .../dgo
Linear driveSLM
12 mm,16 mm,20 mm,25 mm,32 mm,40 mm
68 ... 754 N 10 ... 1,500mm
P: elasticcushioningrings/pads atboth ends,YSR: shockabsorber, hardcharacteristiccurve
Via proximitysensor,For inductivesensors
� Recirculating ball bearing guide� Magnetic force transmission� Individual choice of end-positioncushioning and sensingInternet: .../slm
Software toolMass moment of inertia Juggling pencils and pocket calculators is
now a thing of the past. No matter whetheryou have discs, blocks, push-on flanges,grippers, etc., this tool does the job ofcalculating all the mass moments of inertia.Just save, send or print and you�re finished.This tool can be found on the website underSupport in the Engineering software area asa download or on the DVD under Selectionand sizing.
Semi-rotary drives
Type Size Torque at 6 bar Swivel angle
Permissiblemass momentof inertia
Positionsensing Description
Semi-rotary driveDRQD, DRQD-B
6,8,12,16,20,25,32,40,50
0.16 ... 78.6Nm
0 ... 360° 0.075 ...11,000 kgcm2
Via proximitysensor
� With twin pistons based on the rackand pinion principle
� High accuracy� Extremely good rigidity� Wide range of variants� With spigot or flanged shaftsInternet: .../drqd
16 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
11
Pneumatic drives >
Semi-rotary drives
Type Size Torque at 6 bar Swivel angle
Permissiblemass momentof inertia
Positionsensing Description
Swivel moduleDSM, DSM-B
6,8,10,12,16,25,32,40,63
0.15 ... 80 Nm 0 ... 270° 6.5 ... 5,000kgcm2
Via proximitysensor,None
� Force transmitted directly to the driveshaft via a rotary vane
� With spigot or hollow flanged shaftsInternet: .../dsm
Semi-rotary driveDSR, DSRL
10,12,16,25,32,40
0.5 ... 20 Nm 0 ... 180° 0 ... 150 kgcm2 Via proximitysensor
� Force transmitted directly to the driveshaft via a rotary vane
� With spigot or hollow flanged shaftsInternet: .../dsr
Semi-rotary driveDRQ
16,20,25,32,40,50,63,80,100
0.5 ... 150 Nm 0 ... 360° 2 ... 2,000kgcm2
Via proximitysensor
� Conversion of linear motion intorotation via a play-compensating gearunit
� High precision thanks to backlash-freetransmission of force from the gearrack to the pinionInternet: .../drq
Swivel/lineardrive unitDSL-B
16,20,25,32,40
1.25 ... 20 Nm 0 ... 270° 0.35 ... 40kgcm2
Via proximitysensor
� Rotation and linear motion canbe controlled individually orsimultaneously
� High repetition accuracy� With plain or recirculating ball bearingguide
� Through piston rodInternet: .../dsl
Tandem/high-force cylinders
Type Piston diameterTheoretical force at 6 bar,advance stroke Stroke Description
Tandem cylinderDNCT
32 mm,40 mm,50 mm,63 mm,80 mm,100 mm,125 mm
898 ... 14,244 N 2 ... 500 mm � Mounting hole pattern to ISO 15552� Max. 2 cylinders can be combined� Thrust and return force increase� For position sensing� Male piston rod threadInternet: .../dnct
High-forcecylinderADNH
25 mm,40 mm,63 mm,100 mm
1036 ... 18,281 N 1 ... 150 mm � Mounting hole pattern to ISO 21287� Max. 4 cylinders can be combined� Thrust increase� Only 2 connections are required topressurise all cylinders
� For position sensing� Piston rod with male or female threadInternet: .../adnh
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 17
11
Pneumatic drives >
Multi-position cylinders
Type Piston diameterTheoretical force at 6 bar,advance stroke
Max. total of all individualstrokes Description
Multi-positioncylinderADNM
25 mm,40 mm,63 mm,100 mm
295 ... 4,712 N 1000 ... 2,000 mm � Mounting hole pattern to ISO 21287� Piston rod with male or female thread� 2 ... 5 cylinders can be combined� Max. 5 positions can be approached� Piston rod with male or female thread� For position sensingInternet: .../adnm
Drives with slides
TypePistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning
Positionsensing Description
Mini slideDGSL
6 mm,8 mm,10 mm,12 mm,16 mm,20 mm,25 mm,32 mm
17 ... 483 N 10 ... 200 mm E: short elasticcushioningrings/pads atboth ends,P1: elasticcushioningrings/pads atboth ends withfixed stop,P: elasticcushioningrings/pads atboth ends,Y3:progressiveshock absorberat both ends
Via proximitysensor
� High load capacity and positioningaccuracy
� Maximum movement precision thanksto ground-in ball bearing cage guide
� Maximum flexibility thanks to 8 sizes� Reliable in the event of pressuredrop thanks to clamping cartridge orend-position locking
� Versatile mounting options thanks topiggy-back
� CompactInternet: .../dgsl
Mini slideSLT
6 mm,10 mm,16 mm,20 mm,25 mm
34 ... 590 N 10 ... 200 mm CC: shockabsorber atboth ends,P: elasticcushioningrings/pads atboth ends
Via proximitysensor
� Powerful twin piston drive� Ball bearing guide� Versatile mounting options� Easy adjustment of end positionsInternet: .../slt
Mini slideSLS
6 mm,10 mm,16 mm
17 ... 121 N 5 ... 30 mm P: elasticcushioningrings/pads atboth ends
Via proximitysensor
� Slim design� Ball bearing guide� Versatile mounting optionsInternet: .../sls
Mini slideSLF
6 mm,10 mm,16 mm
17 ... 121 N 10 ... 80 mm P: elasticcushioningrings/pads atboth ends
Via proximitysensor
� Flat design� Ball bearing guide� Versatile mounting options� Easy adjustment of end positionsInternet: .../slf
18 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
11
Pneumatic drives >
Drives with slides
TypePistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning
Positionsensing Description
Mini slideSPZ
10 mm,16 mm,20 mm,25 mm,32 mm
60 ... 724 N 10 ... 100 mm P: elasticcushioningrings/pads atboth ends
Via proximitysensor
� Twin piston� High force with excellent protectionagainst torsion
� Widely spaced piston rods for highload capacity
� Plain or recirculating ball bearingguidesInternet: .../spz
Drives with guide rods
TypePistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning
Positionsensing Description
Guided driveDFP
10 mm,16 mm,25 mm,32 mm,50 mm,80 mm
31 ... 3,016 N 25 ... 500 mm P: elasticcushioningrings/pads atboth ends,PPV:adjustablepneumaticcushioning atboth ends
Via proximitysensor
� High-precision guiding thanks torecirculating ball bearing guide onpiston rod
� Able to absorb high torques� Saves space in comparison withstandard cylindersInternet: .../dfp
Compact cylinderADNGF
12 mm,16 mm,20 mm,25 mm,32 mm,40 mm,50 mm,63 mm,80 mm,100 mm
68 ... 4,712 N 1 ... 400 mm P: elasticcushioningrings/pads atboth ends
Via proximitysensor
� Mounting hole pattern to ISO 21287� Piston rod secured against rotation bymeans of guide rod and yoke plate
� Plain-bearing guide� Available with through piston rodInternet: .../adngf
Compact cylinderADVUL
12 mm,16 mm,20 mm,25 mm,32 mm,40 mm,50 mm,63 mm,80 mm,100 mm
51 ... 4,712 N 1 ... 400 mm P: elasticcushioningrings/pads atboth ends
Via proximitysensor
� Piston rod secured against rotation bymeans of guide rod and yoke plate
� For position sensing� Plain-bearing guide� Available with through piston rodInternet: .../advul
Mini guided driveDFC
4 mm,6 mm,10 mm
7.5 ... 47 N 5 ... 30 mm P: elasticcushioningrings/pads atboth ends
Via proximitysensor,None
� Smallest guided drive� High precision and load capacity� Minimal space requirement� Drive and guide unit in a singlehousing
� Plain or recirculating ball bearingguidesInternet: .../dfc
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 19
11
Pneumatic drives >
Drives with guide rods
TypePistondiameter
Theoreticalforce at 6 bar,advance stroke Stroke Cushioning
Positionsensing Description
Guided driveDFM, DFM-B
12 mm,16 mm,20 mm,25 mm,32 mm,40 mm,50 mm,63 mm,80 mm,100 mm
51 ... 4,712 N 10 ... 400 mm P: elasticcushioningrings/pads atboth ends,PPV:adjustablepneumaticcushioning atboth ends,YSRW: shockabsorber, softcharacteristiccurve
Via proximitysensor
� Drive and guide unit in a singlehousing
� Plain or recirculating ball bearingguides
� High resistance to torques and lateralforces
� Wide range of mounting options� Wide range of variantsInternet: .../dfm
Guided driveDGRF
20 mm,25 mm,32 mm,40 mm,50 mm,63 mm
189 ... 1,870 N 10 ... 400 mm P: elasticcushioningrings/pads atboth ends,PPV:adjustablepneumaticcushioning atboth ends
Via proximitysensor
� Designed completely according toClean Design criteria
� Long service life thanks to optionalseal for unlubricated operation
� FDA-approved lubrication and sealingon the basic version
� Good corrosion resistance and smoothsurfaces for easy cleaning
� Hygienic mounting of the sensorspossible
� Compact design with high guidanceaccuracy and load capacityInternet: .../dgrf
Twin-pistoncylinderDPZ, DPZJ
10 mm,16 mm,20 mm,25 mm,32 mm
60 ... 966 N 10 ... 100 mm P: elasticcushioningrings/pads atboth ends
Via proximitysensor
� Twin pistons provide twice the force inhalf the space
� Plain or recirculating ball bearingguides
� Precision stroke adjustment in the endpositionInternet: .../dpz
Linear drive unitSLE
10 mm,16 mm,20 mm,25 mm,32 mm,40 mm,50 mm
47 ... 1,178 N 10 ... 500 mm YSR: shockabsorber, hardcharacteristiccurve
Via proximitysensor,For inductivesensors
� Combination of guide unit andstandard cylinder
� Multi-axis and drive combinations� Recirculating ball bearing guideInternet: .../sle
Linear modules
TypeMode ofoperation
Pistondiameter Stroke
Theoreticalforce at 6 bar,advance stroke
Positionsensing Description
Linear moduleHMP
Double-acting 16 mm,20 mm,25 mm,32 mm
50 ... 400 mm 121 ... 483 N Via proximitysensor
� Precision, backlash-free guidance� High rigidity with a long stroke� Infinitely adjustable end stops� Flexible thanks to intermediateposition
� Adjustable end-position cushioningInternet: .../hmp
20 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
11
Pneumatic drives >
Stopper cylinders
TypePistondiameter
Permissibleimpact force onthe advancedpiston rod Stroke
Positionsensing
Toggle leverpositionsensing Description
Stopper cylinderDFST
50 mm,63 mm,80 mm
3000 ... 6,000N
30 ... 40 mm Via proximitysensor
For inductivesensors
� Toggle lever design� Integrated adjustable shock absorberfor smooth and adapted stopping
� Up to 800 kg impact load� For position sensing on the piston� For position sensing on the togglelever by inductive sensor
� Lever locking mechanism� Toggle lever deactivatorInternet: .../dfst
Stopper cylinderSTA, STAF
20 mm,32 mm,50 mm,80 mm
170 ... 14,600N
15 ... 40 mm Via proximitysensor
� Trunnion and roller version� Absorption of high lateral forces� Direct mounting of solenoid valves onflange plateInternet: .../sta
Clamping modules
Type Clamping area Stroke Description
ClampingmoduleEV
10x30,15x40,15x63,20x75,20x120,20x180,Dia. 12,Dia. 16,Dia. 20,Dia. 25,Dia. 32,Dia. 40,Dia. 50,Dia. 63
3 ... 5 mm � Single-acting, with reset function� Clamping force 55 ... 1,690 N� Compact cylinders without piston rodwith diaphragm
� Flat, space-saving design� Hermetically sealed� Pressure plates and foot mounting asaccessoriesInternet: .../ev
Linear/swivel clamps
Type Piston diameter
Theoreticalclamping forceat 6 bar Clamping stroke Swivel angle Description
Linear/swivelclampCLR
12 mm,16 mm,20 mm,25 mm,32 mm,40 mm,50 mm,63 mm
51 ... 1,682 N 10 ... 50 mm 90° +/- 2°,90° +/- 3°,90° +/- 4°
� Double-acting� Swivelling and clamping in one step� Swivel direction adjustable� Compact� Clamping fingers as accessories� Available with dust and weldingspatter protection
� For position sensingInternet: .../clr
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 21
11
Pneumatic drives >
Bellows cylinders
Type Size Stroke Description
Bellows cylinderEB
145,165,215,250,325,385
60 ... 230 mm � Use as a spring element or for reducingoscillations
� Single-bellows or double-bellowscylinder
� High forces with a short stroke� Uniform movement: no stick-slipeffect
� Application: in dusty environments orin water
� Maintenance-freeInternet: .../eb
Fluidic muscle
Type SizeTheoretical force at6 bar Nominal length Max. contraction Description
Fluidic muscleDMSP, MAS
10,20,40
480 ... 6,000 N 40 ... 9,000 mm 25% of nominallength
� Single-acting, pulling� With press-fitted (DMSP) or screwed(MAS) connection
� Three integrated adapter variants� Ten times the initial force of acomparable pneumatic cylinder
� Judder-free movements� Hermetically sealed design offersprotection against dust, dirt andmoistureInternet: .../dmsp
Software toolRotary indexing tableselection
This tool helps you to select the right rotaryindexing table of the type DHTG from Festofor your application. Let yourself be guidedby the program and enter your generalparameters and you will receive at least onesuggestion for the product best suited toyour application.Use expert mode to set more parameters.This tool can be found in the electroniccatalogue for the product group underEngineering or on the DVD under Selectionand sizing.
Rotary indexing tables
Type Size Torque at 6 bar Pitch Description
Rotary indexingtableDHTG
65,90,140,220
2.1 ... 58.9 Nm 2 ... 24 � Sturdy mechanical system� Simple planning and commissioning� Rotary table diameters: 65, 90, 140,220 mm
� Free direction of rotation controllerInternet: .../dhtg
22 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
11
Pneumatic drives >
Semi-rotary drives for process automation
Type
Torque at rated operatingpressure and 0° swivelangle Torque at 6 bar Swivel angle Description
Semi-rotary driveDAPS
8 ... 8,000 Nm 90° � High break-away torques� Approved in accordance with Directive94/9/EC (ATEX)
� Mounting flange to ISO 5211� Mounting hole pattern to VDI/VDE3845
� Port pattern as per NAMUR forsolenoid valves/sensor boxes toVDI/VDE 3845Internet: .../daps
Semi-rotary driveDFPB
7 ... 945 Nm 90° � Identical torque characteristic acrossthe entire rotation angle range of 90°
� Process valve connection to ISO 5211on both sides
� Can be mounted on all process valvesusing pressure relief slot
� Mounting hole pattern to VDI/VDE3845
� Sturdy, non-slip and easy-to-cleanaluminium housing
� Long service life, low wear� Increased corrosion protectionInternet: .../dfpb
Semi-rotary driveDRD, DRE
7.44 ... 8,814 Nm 90° � For automating swivel valves in theprocess industry
� Sturdy and precise� For highly accurate advancing tovarious positions
� Mounting flange to ISO 5211� Mounting hole pattern to VDI/VDE3845
� Port pattern as per NAMUR forsolenoid valves/sensor boxes toVDI/VDE 3845Internet: .../drd
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 23
11
Pneumatic drives >
Linear drives for process automation
Type Piston diameterTheoretical force at 6 bar,advance stroke Stroke Description
Linear driveDFPI
100 mm,125 mm,160 mm,200 mm,250 mm,320 mm
4,712 ... 48,255 N 40 ... 990 mm � Actuation of linear process valves inprocess engineering systems
� With integrated displacement encoder(potentiometer)
� Available with integrated positioningcontroller and valve manifold
� Sturdy and compact housing with highdegree of protection
� Ideal for outdoor use thanks to highdegree of corrosion protection
� Suitable for use in water, industrialprocess water and sewage technology,as well as the silage and bulk goodsindustry
� Easy to integrate into an existingcontrol architectureInternet: .../dfpi
Linear driveDLP
80 mm,100 mm,125 mm,160 mm,200 mm,250 mm,320 mm
3,016 ... 48,255 N 40 ... 600 mm � Approved in accordance with Directive94/9/EC (ATEX)
� Port pattern as per NAMUR forsolenoid valves to VDI/VDE 3845
� Mounting hole pattern to ISO 5210� Male piston rod thread� For position sensingInternet: .../dlp
Accessories for drives for process automation
Type Description
Measuring unitASDLP
� For linear drives DLP for themechanical, infinitely fine sensing ofmovement
� For the closed-loop and open-loopcontrol of gate slides, flat slide valvesand weirs particularly in the area ofwater and sewage technology and thebulk goods industry
� Interface to the positioning controllersto VDI/VDE 3845 (Namur)Internet: .../asdlp
Local controllerDLP-VSE
� Convenient manual control unit foractuating process drives
� Pneumatic drive with the functionalityof an electric drive
� Controller mounting options onand separately from the drive (wallmounting)
� Operated on site or remote-controlled� High corrosion protectionInternet: .../dlp-vse
24 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
11
Pneumatic drives >
Software toolShock absorber selection Whether diagonal or vertical, curved or
straight, lever or disc, all types of cushionedmovements are taken into account. Thesoftware tool always recommends the bestshock absorber.This tool can be found on the website underSupport in the Engineering software area asa download or on the DVD under Selectionand sizing.
Shock absorbers
Type StrokeMax. energy absorptionper stroke Cushioning Description
Shock absorberYSR-C
4 ... 60 mm 0.6 ... 380 J Self-adjusting � Hydraulic shock absorber withpath-controlled flow control function
� Rapidly increasing cushioning forcecurve
� Short cushioning stroke� Suitable for rotary drivesInternet: .../ysr-c
Shock absorberYSRW
8 ... 34 mm 1.3 ... 70 J Self-adjusting,Soft characteristic curve
� Hydraulic shock absorber withpath-controlled flow control function
� Gently increasing cushioning forcecurve
� Long cushioning stroke� Suitable for low-vibration operation� Short cycle times possibleInternet: .../ysrw
Shock absorberDYSR
8 ... 60 mm 4 ... 384 J Adjustable � Adjustable cushioning characteristics� Easy adjustmentInternet: .../dysr
Shock absorberYSRWJ
8 ... 14 mm 1 ... 3 J Self-adjusting,Soft characteristic curve
� Cushioning with self-adjusting,progressive hydraulic shock absorber
� Gently increasing cushioning forcecurve
� Adjustable cushioning stroke� End-position sensing with proximitysensor SME/SMT-8
� Precision end-position adjustmentInternet: .../ysrwj
Shock absorberDYEF
0.9 ... 7 mm 0.005 ... 1.2 J Elastic cushioning elementwith metal fixed stop,P cushioning without metalfixed stop
� Mechanical shock absorber withflexible rubber buffer
� Flexible rubber buffer allows a definedmetal end position
� Adjustable cushioning hardness� Ideal for cushioning low energy� With precise metal end positionInternet: .../dyef
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 25
11
Pneumatic drives >
Shock absorbers
Type StrokeMax. energy absorptionper stroke Cushioning Description
Shock absorberDYSC
5 ... 18 mm 1 ... 25 J Self-adjusting � Hydraulic shock absorber withpath-controlled flow control function
� Rapidly increasing cushioning forcecurve
� Short cushioning stroke� Suitable for rotary drives� With metal fixed stopInternet: .../dysc
Shock absorberDYSW
6 ... 20 mm 0.8 ... 12 J Self-adjusting,Soft characteristic curve
� Hydraulic shock absorber withpath-controlled flow control function
� Gently increasing cushioning forcecurve
� Long cushioning stroke� Suitable for low-vibration operation� Short cycle times possible� With metal fixed stopInternet: .../dysw
Accessories for pneumatic drives
Type Size StrokeRound material tobe clamped Static holding force Description
Guide unitFEN, FENG
8 /10,12 /16,20,25,32,40,50,63,80,100
1 ... 500 mm � For protecting standard cylindersagainst rotation at high torque loads
� High guide precision for workpiecehandling
� Plain or recirculating ball bearingguidesInternet: .../fen
ClampingcartridgeKP
4 ... 32 mm 80 ... 7,500 N � For installation of clamping units� Not certified for use in safety-relevantcontrol systemsInternet: .../kp
Clamping unitKPE, KEC, KEC-S
4 ... 32 mm 80 ... 8,000 N � KPE: Ready-to-install combination ofclamping cartridge KP and housing
� KEC: For use as holding device (staticapplication)
� KEC-S: For security-relatedapplicationsInternet: .../kpe
26 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
11
Pneumatic drives >
Customised components � for your specific requirementsDrives with customiseddesignsCan�t find the pneumaticdrive you need in ourcatalogue?We can offer you customisedcomponents that aretailored to your specificrequirements � from minorproduct modifications tocomplete new productdevelopments.
Common product modifications:� Materials for special ambient conditions� Customised dimensions� Special strokes� Customised mounting options� Implementation of special cylinderfunctions (cylinder/valve combinations,single-acting principle etc.)
Many additional variants are possible. Askyour Festo sales engineer, who will be happyto help.Further information on customisedcomponents can be found on your localwebsite at www.festo.com
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 27
11
Servopneumatic positioning systems >
Axis controllers
Type No. of axis strings Axes per string Description
Axis controllerCPX-CMAX
1 1 � Axis controller as CPX module,supports pneumatic piston rod,rodless and semi-rotary drives
� Force and position control� Use with all fieldbus/Ethernet andCEC controllers available in CPX
� Simple commissioning thanks to autoidentification function
� Rapid commissioning andcomprehensive diagnostics withthe parameterisation software FCTInternet: .../cpx-cmax
End-positioncontrollerCPX-CMPX
1 1 � Electronic end-position control forpneumatic drives
� Soft Stop for smooth braking andquick acceleration
� Use with all fieldbus/Ethernetavailable in CPX
� Simple commissioning, Festo plug andwork®
� Approx. 30% shorter travel times and30% less air consumption than withcomparable standard pneumaticsInternet: .../cpx-cmpx
Axis controllerSPC200
2 2 � Positioning controller in modulardesign with I/O or fieldbus interface
� Supports pneumatic piston rod,rodless and rotary drives as well asstepper motor drives
� Commissioning software: WinPISA� For dynamic positioning applications� Programming language to DIN 66025Internet: .../spc200
End-positioncontrollerSPC11
1 1 � Quickly and smoothly into theend position with two additionalintermediate positions
� Electronic end-position cushioning� Quick and easy commissioning:configure, teach, done
� Supports pneumatic piston rod,rodless and rotary drivesInternet: .../spc11
MeasuringmoduleCPX-CMIX
1 1 � Movement and measurement withmeasuring module CPX-CMIX
� Records the position and speed of adrive with displacement encoder
� Standardised digital signal processing� Use with all fieldbus/Ethernet andCEC controllers available in CPX
� Measurement accuracy ±0.01 ... 0.02mm
� Quick and easy commissioningInternet: .../cpx-cmix
28 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
22
Servopneumatic positioning systems >
Software toolSoft Stop Soft Stop virtually makes the impossible
possible. Travel times are reduced by asmuch as 30% for pneumatic drives andvibration is also greatly reduced. Theselection program performs all of thenecessary calculations.This tool can be found on the website underSupport in the Engineering software area asa download or on the DVD under Selectionand sizing.
Linear drives with displacement encoder
TypePistondiameter
Theoreticalforce at 6 bar,advance stroke
Max. load,horizontal
Max. load,vertical Stroke Description
StandardcylinderDNCI
32 mm,40 mm,50 mm,63 mm
415 ... 1,870 N 45 ... 180 kg 15 ... 60 kg 10 ... 2,000mm
� Standards-based cylinder to ISO15552
� With integrated, non-contactingand relative analogue displacementmeasuring encoder
� Suitable for servopneumaticapplications with CPX-CMAX, -CMPX,-CMIX, SPC200 and SPC11
� Piston rod variants� Male piston rod threadInternet: .../dnci
StandardcylinderDNCM
32 mm,50 mm
483 ... 1,178 N 45 ... 120 kg 15 ... 40 kg 100 ... 500 mm � Standards-based cylinder to ISO15552
� With analogue, external displacementencoder
� Suitable for servopneumaticapplications with CPX-CMAX, -CMPX,-CMIX, SPC200 and SPC11
� With attached potentiometer� Piston rod variants� Male piston rod threadInternet: .../dncm
Linear driveDGCI
18 mm,25 mm,32 mm,40 mm,63 mm
153 ... 1,870 N 100 ... 2,000mm
� With non-contacting absolutedisplacement measuring encoder
� Suitable for servopneumaticapplications with CPX-CMAX, -CMPX,-CMIX, SPC200 and SPC11
� With guide� Supply ports optionally on end face orfrontInternet: .../dgci
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 29
22
Servopneumatic positioning systems >
Linear drives with displacement encoder
TypePistondiameter
Theoreticalforce at 6 bar,advance stroke
Max. load,horizontal
Max. load,vertical Stroke Description
Linear driveDGPI, DGPIL
25 mm,32 mm,40 mm,50 mm,63 mm
295 ... 1,870 N � With integrated non-contactingabsolute displacement measuringencoder
� Suitable for servopneumaticapplications with CPX-CMAX, -CMPX,-CMIX, SPC200 and SPC11
� With or without guideInternet: .../dgpi
Semi-rotary drives with displacement encoder
TypePistondiameter Torque at 6 bar
Max. massmomentof inertia,horizontal
Max. massmomentof inertia,vertical Swivel angle Description
Swivel moduleDSMI
25 mm,40 mm,63 mm
5 ... 40 Nm 0.03 ... 0.6kgm2
0.03 ... 0.6kgm2
0 ... 272° � Rotary encoder integrated� Suitable for servopneumaticapplications with CPX-CMAX, -CMPX,-CMIX, SPC200 and SPC11
� With rotary vane� Compact designInternet: .../dsmi
Displacement encoders
Type Stroke
Measuringprinciple ofdisplacementencoder Output signal
Displacementresolution Description
DisplacementencoderMLO
100 ... 2,000 mm Analogue Analogue 0.01 mm � Absolute measurement with highresolution
� System product for servopneumaticpositioning technology and Smart SoftStop
� Version: profile or connecting rodInternet: .../mlo
DisplacementencoderMME
225 ... 2,000 mm Digital CAN protocol typeSPC-AIF
0 ... 0.01 mm � Method of measurement:magnetostrictive
� Non-contacting with absolutemeasurements
� High speeds of travel� System product for servopneumaticpositioning technology and Smart SoftStopInternet: .../mme
30 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
22
Servopneumatic positioning systems >
Sensor interfaces
Type Diagnostic function
Electricalconnection,displacementencoder
Electricalconnection, controlinterface Control interface Description
Sensor interfaceCASM
Display via LED 5-pin,8-pin,Socket,M12
5-pin,M9,Plug
CAN bus with Festoprotocol,Digital,Without terminatingresistor
� For the actuation of pneumaticpositioning drives with the latestservopneumatic systems such asCPX-CMAX, -CMPX and -CMIX
� Short lines for analogue signals,secure digitised bus transmission
� Convenient plug and work®concept with auto identification andcomprehensive diagnostics
� High degree of protection IP67Internet: .../casm
Measured-valuetransducerDADE
Display via LED 8-pin,Socket,M12
� For standard cylinder DNCI� Converts sensor signals into voltageor current signals
� Mounting via through-holes� Diagnostic display via LEDInternet: .../dade
Axis interfaceSPC-AIF
Display via LED Cable with plug,8-pin socket, M12,5-pin socket, M9
5-pin,7-pin,M9,Plug and socket
CAN bus with Festoprotocol,Digital,Without terminatingresistor
� Interface for signal distribution of thecontrol signal from the SPC200 tothe drive/displacement encoder andproportional valve MPYE
� Transmission of control signals to asecond axis interface for a secondpositioning axis
� High protection class IP65� Short lines for analogue signals� Pre-assembled cablesInternet: .../spc-aif
Proportional valves
Type Valve functionPneumaticconnection 1
Pressure regulationrange
Standard nominalflow rate Description
Proportionaldirectionalcontrol valveVPWP
5/3-wayproportionaldirectional controlvalve, closed
G1/4,G1/8
350 ... 1,400 l/min � Regulated piston spool valve� Digital actuation� Integrated pressure sensors formonitoring function and force control
� With auto identification� Diagnostic function� Integrated digital output, e.g. for aclamping/brake unit
� Suitable for servopneumaticapplications with CPX-CMAX andCPX-CMPXInternet: .../vpwp
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 31
22
Electromechanical drives >
Software toolPositioningDrives Which electromechanical linear drive best
meets your needs? Enter the data foryour application, such as position values,effective loads and mounting position,and the software suggests a number ofsolutions.This tool can be found on the website underSupport in the Engineering software area asa download or on the DVD under Selectionand sizing.
Linear drives and slides
Type Size Max. feed force Fx Repetition accuracy Working stroke Description
Electric cylinderDNCE
32,40,63
300 ... 2,500 N +/-0.02 - +/-0.03mm,+/-0.02 mm,+/-0.07 mm
100 ... 800 mm � Lead screw or ball screw� Standard port pattern to ISO 15552� Axial or parallel motor interface� Integrated reference switch� Freely positionable� Non-rotating piston rod� Larger strokes available on requestInternet: .../dnce
Toothed belt axisEGC-TB
50,70,80,120,185
50 ... 2,500 N +/-0.08 mm,+/-0.1 mm
50 ... 8,500 mm � Recirculating ball bearing guide forhigh forces and torques
� Profile with optimised rigidity� Highly dynamic response andminimum vibration
� Small toothed disc diameter� Reference switch optional� Freely positionableInternet: .../egc-tb
Spindle axisEGC-BS
70,80,120,185
300 ... 3,000 N +/-0.02 mm 50 ... 3,000 mm � Recirculating ball bearing guide forhigh forces and torques
� Profile with optimised rigidity� Highly dynamic response andminimum vibration
� Various spindle pitches� Reference switch optional� Freely positionableInternet: .../egc-bs
32 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
33
Electromechanical drives >
Linear drives and slides
Type Size Max. feed force Fx Repetition accuracy Working stroke Description
Toothed belt axisELGR
35,45,55
50 ... 350 N +/-0.1 mm 50 ... 1,500 mm � Optimum price/performance ratio� Ready-to-install unit for quick andeasy design
� High reliability thanks to testedservice life of 5,000 km
� Motor can be mounted on any one of4 sides
� With plain or recirculating ball bearingguide
� Kit for easy and space-savingend-position sensing
� Quick commissioning followingsimple design using thePositioningDrives software aswell as predefined parameter sets inthe parameterisation software FCTInternet: .../elgr
Toothed belt axisELGG
35,45,55
50 ... 350 N +/-0.1 mm 50 ... 1,200 mm � For universal use with opposingmovement
� The different guide variants, theoptional long slide and the centralsupport enable solutions that aretechnically appropriate, reliable andat the same time economical
� Long service life of over 2,500 km perslide
� Simple and reliable design withPositioningDrives
� Fast and user-friendly commissioningwith the Festo Configuration Tool FCTInternet: .../elgg
Toothed belt axisDGE-ZR
8,12,18,25,40,63
15 ... 1,500 N +/-0.08 mm,+/-0.1 mm
1 ... 4,500 mm � Without guide, recirculating ballbearing guide, roller guide orheavy-duty guide
� Optional protected version� Compact dimensions� Reference switch optional� Freely positionableInternet: .../dge-zr
Spindle axisDGE-SP
18,25,40,63
140... 1,600 N +/-0.02 mm 100 ... 2,000 mm � Without guide, recirculating ballbearing guide or heavy-duty guide
� Optional protected version� Compact dimensions� Reference switch optional� Freely positionableInternet: .../dge-sp
Cantilever axisDGEA-ZR
18,25,40
230 ... 1,000 N +/-0.05 mm 1 ... 1,000 mm � Toothed belt drive with recirculatingball bearing guide
� Dynamic cantilever operation� Stationary drive head� Reference switch optional� Freely positionableInternet: .../dgea
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 33
33
Electromechanical drives >
Linear drives and slides
Type Size Max. feed force Fx Repetition accuracy Working stroke Description
Positioning axisDMES
18,25,40,63
240 ... 3,000 N +/-0.05 mm,+/-0.07 mm
50 ... 1,800 mm � Mechanical linear drive� Without guide, plain or recirculatingball bearing guide
� High mechanical torques� High feed forces of up to 3,000 N� Compact dimensions� Reference switch optional� Freely positionableInternet: .../dmes
Cantilever axisEGSA
50,60
100 ... 200 N +/-0.01 mm 100 ... 300 mm � Electromechanical cantilever axis withrecirculating ball bearing spindle
� High rigidity� Maximum precision� Highly dynamic response� Freely positionable� Integrated reference switchInternet: .../egsa
Cantilever axisEGSL
35,45,55,75
75 ... 450 N +/-0.015 mm 50 ... 300 mm � Very high rated slide loads, idealfor vertical applications such aspress-fitting or joining
� Safe: The completely closed spindlestops dirt or stray small parts gettinginto the guide area
� Flexibility: Motor can be attachedlaterally or axially, in this case turnedby 4 x 90°
� Suitable software tools in the softwarepackage FCT from FestoInternet: .../egsl
Mini slideSLTE
10,16
+/-100,000 µm 50 ... 150 mm � Electromechanical linear axis withplain bearing spindle
� With DC servo motor� Easy actuation via I/O interface,Profibus, CANopen, DeviceNet
� Precise and rigid guide� Freely positionable� Fast positioning timesInternet: .../slte
Electric slideEGSK, EGSP
15,20,26,33,46
19 ... 466 N +/-0.003 - +/-0.004mm,+/-0.003 - +/-0.01mm,+/-0.01 mm
25 ... 840 mm � Electromechanical linear axis withrecirculating ball bearing spindle
� Recirculating ball bearing guide withand without ball bearing chain
� Standardised mounting interfaces� Compact design� High rigidity� Long service lifeInternet: .../egsk
34 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
33
Electromechanical drives >
Semi-rotary drives
Type Max. driving torque Max. input speed Rotation angle Description
Rotary moduleERMB
0.7 ... 8.5 Nm 900 ... 1,350 rpm Endless � Electromechanical rotary module withtoothed belt
� Compact design� Multi-directional mounting interfaces� Stable arrangement of the outputshaft bearings
� Unlimited and flexible rotation angleInternet: .../ermb
Rotary liftingmoduleEHMB
0.7 ... 6.7 Nm 900 ... 1,350 rpm Endless � Complete: Combined and configurablerotary lifting movement
� Dynamic, flexible, efficient thanks tothe modular drive concept for linearmovement
� Simple, convenient and safe thanksto hollow shaft with large internaldiameter for installing electric cables
� Fastest positioning times thanksto high dynamic response duringrotation, e.g. 0.25 s when swivelling a1 kg load by 180°Internet: .../ehmb
Direct drives
Type Size Max. feed force Fx Repetition accuracy Working stroke Description
Linear driveELGL
30,64,120
56 ... 475 N +/-0.01 mm 1 ... 5,750 mm � Electric linear drive with linear motor,air cushion bearing and displacementencoder
� Ready-to-install system offeringgreater flexibility, precision anddynamic response
� Air cushion bearing provides highprecision, high linearity and wear-freecharacteristics
� Actuation via motor controllerCMMP-ASInternet: .../elgl
Electric cylinderDNCE-LAS
32,40
93.7 ... 202 N +/-0.02 mm 100 ... 400 mm � Linear motor axis with piston rod� Consisting of freely positionablelinear motor, integrated displacementencoder, reference switch and plainbearings
� Positioning with very high dynamicresponse for small loads
� Easy actuation via I/O interface,Profibus, CANopen includinginterpolated positionmode, DeviceNet
� Festo plug and work® for clearlogistics and rapid assembly
� Configuration and commissioning withthe parameterisation software FCT
� Optionally with clamping unitInternet: .../dnce*las
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 35
33
Electromechanical drives >
Direct drives
Type Size Max. feed force Fx Repetition accuracy Working stroke Description
Guided driveDFME-LAS
32,40
94 ... 202 N +/-0.015 mm 100 ... 400 mm � Recirculating ball bearing guide� Consisting of freely positionablelinear motor, integrated displacementencoder and reference switch
� Positioning with very high dynamicresponse for small loads
� Long service life andmaintenance-freeoperation
� Easy actuation via I/O interface,Profibus, CANopen includinginterpolated positionmode, DeviceNet
� Configuration and commissioning withthe parameterisation software FCT
� Festo plug and work® for smoothlogistics and assemblyInternet: .../dfme*las
Short-strokecylinderADNE-LAS
32,40
8 ... 55 N +/-0.1 mm 15 ... 45 mm � Electric short-stroke cylinder withintegrated linear motor
� Highly dynamic movement betweentwo end positions
� Electronic end-position cushioning� Simple commissioning, Festo plug andwork®
� Also for harsh ambient conditionsInternet: .../adne*las
Customised components � for your specific requirementsDrives with customiseddesignsCan�t find theelectromechanical driveyou need in our catalogue?We can offer you customisedcomponents that aretailored to your specificrequirements � from minorproduct modifications tocomplete new productdevelopments.
Common product modifications:� Special strokes� Design for special ambient conditions� Design optimised for the fitting space� Design with opposing carriages� Design with absolute encoderMany additional variants are possible. Askyour Festo sales engineer, who will be happyto help.Further information on customisedcomponents can be found on your localwebsite at www.festo.com
36 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
33
Motors and controllers >
Software toolFesto Configuration Tool(FCT)FCT is a configuration andparameterisation softwareprogram, which supports allFesto devices, in particularmotor controllers.
It is extremely flexible, provides full supportfor the device properties and is simple andintuitive to operate. The user is guidedstep-by-step through the commissioningprocess while each individual step ischecked.
The FCT parameterisation software can befound on the website under Support in theSupport and Downloads area. Enter FCT asa search term here to retrieve it.
CoDeSysCoDeSys makes yourlife easier with simplecommissioning, fastprogramming andparameterisation �standardised programmingof embedded devices to IEC61131-3
Advantages� Hardware-neutral software platformfor quick and easy configuration,programming and commissioning ofpneumatic and electric automationsolutions
� Extensive module libraries for single ormulti-axis positioning motions
� The IEC 61131-3 standard means thatCoDeSys is flexible and open for all typesof control tasks
� Modular: offline and online functions,as well as components for hardwareconfiguration and visualisation
� User-friendly IEC functional moduleextension
� Re-use of existing application partsThe CoDeSys parameterisation softwarecan be found on the website under Supportin the Support and Downloads area. EnterCoDeSys as a search term here to retrieve it.
Servo motors
Type Nominal torque Nominal speed Peak torqueMax. rotationalspeed Description
Servo motorEMMS-AS
0.2 ... 20.05 Nm 2,000 ... 10,300rpm
1 ... 48.8 Nm 2,210 ... 11,180rpm
� Permanently excited, electrodynamic,brushless servo motor
� Digital absolute displacementencoder, single turn or multi-turn
� Available with holding brake� Optimised connection technologyInternet: .../emms-as
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 37
44
Motors and controllers >
Servo motors
Type Nominal torque Nominal speed Peak torqueMax. rotationalspeed Description
Motor unitMTR-DCI
3,000 ... 3,400 rpm 3,000 ... 3,400 rpm � DC motor with encoder� Gear unit, controller, power electronicsintegrated
� Parameterisation interface RS232� I/O, Profibus, CANopen, Profibus DP,DeviceNet interface
� Control panel with display, optional� Gear unit ratio: 7:1, 14:1, 22:1Internet: .../mtr-dci
Stepper motors
Type Max. rotational speed Motor holding torque Description
Stepper motorEMMS-ST
430 ... 2,720 rpm 0.5 ... 9.3 Nm � 2-phase hybrid technology� Step angle 1.8°� Standard industrial connectiontechnology
� Optional: encoder, brakeInternet: .../emms-st
Controllers for AC servo motors
TypeNominalcurrent
Nominaloperatingvoltage AC
Phases ofnominaloperatingvoltage
Controllerrated output Fieldbus link Description
Motor controllerCMMS-AS
4 ... 5 A 230 V 1-phase 600 VA CANopen,DeviceNet,Profibus DP
� For servo motor� Digital absolute shaft encoder insingle-turn and multi-turn versions
� Can be operated as a torque, speed orposition controller
� Position controller, integrated brakechopper
� I/O interface� Electronic gear unitInternet: .../cmms-as
Motor controllerCMMD-AS
8 ... 10 A 230 V 1-phase 1,200 VA CANopen,DeviceNet,Profibus DP
� Only one piece of controller hardwarerequired to move two servo motorsindependently of each other
� The motor current of 2x 4 A can bedistributed between both controllerswith a ratio of 2 A:6 A
� Simple and user-friendly:commissioning and firmwareupdates via SD card slot
� Programming and parameterisationvia software tools
� Jerk-free and infinite positioning bymeans of closed-loop operation
� Reliable restart blocking forsafety-relevant applicationsInternet: .../cmmd-as
38 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
44
Motors and controllers >
Controllers for AC servo motors
TypeNominalcurrent
Nominaloperatingvoltage AC
Phases ofnominaloperatingvoltage
Controllerrated output Fieldbus link Description
Motor controllerCMMP-AS
2 ... 20 A 230 ... 400 V 1-phase,3-phase
500 ... 12,000VA
CANopen,DeviceNet,Ethernet,Profibus DP,Sercos
� For servo motor� Flying saw� For cam disk controllers and highlydynamic movements
� Standardised interfaces allowseamless integration in mechatronicmulti-axis modular systems
� Reliable and convenientcommissioning, programmingand parameterisation via softwaretoolsInternet: .../cmmp-as
Controllers for DC servo motors
TypeNominal current,load supply
Nominal voltage,load supply DC
Controller ratedoutput Fieldbus link Description
Motor controllerSFC-DC
3 A 24 V 75 VA CANopen,DeviceNet,Profibus DP
� High degree of protection IP54� Easy actuation via I/O interface,Profibus, CANopen, DeviceNet
� With or without control panel� Parameterisation via control panel orparameterisation software FCT
� For actuation of mini slide SLTE,parallel gripper HGPLEInternet: .../sfc-dc
Motor controllerSFC-LACI
10 A 48 V 480 VA CANopen,Profibus DP
� High degree of protection IP54� Open-loop and closed-loop positioncontroller
� Easy actuation via I/O interface,Profibus, CANopen includinginterpolated position mode
� With or without control panel� Parameterisation via control panel orparameterisation software FCT
� For controlling electric cylinderDNCE-LAS and guided drive DFME-LASInternet: .../sfc-laci
End-positioncontrollerCMFL
3 A 24 V either,48 V
� For force-controlled positioning ofshort-stroke cylinder ADNE-LAS
� Realisation of dynamic movementwith continuous monitoring, including�Motion Complete�
� Highly dynamic responseInternet: .../cmfl
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 39
44
Motors and controllers >
Controllers for stepper motors
TypeNominalcurrent
Nominalcurrent, loadsupply
Max. stepfrequency
Controlleroperatingmode Fieldbus link Description
Motor controllerCMMS-ST
8 A 4 kHz PWM MOSFETpower endstage
CANopen,Profibus DP
� For stepper motor� Can be operated as a torque, speed orposition controller
� Position controller, integrated brakechopper
� I/O interface� Electronic gear unitInternet: .../cmms-st
Motor controllerSEC-ST
1.25 ... 6 A 40 kHz Bipolarchopper driver
� For stepper motor� Compact unit, ready for installation� Current reduction� Pre-assembled electrical connectionaccessoriesInternet: .../sec-st
Multi-axis controllers
TypeOperatingvoltage
Operatingvoltage rangeDC
Controlinterface Fieldbus link
Supportedkinematicsystems Description
ControllerCMXR-C1
24 VDC+20%/-15%,24 VDC+25%/-20%
2 x CANopenmasters
2-axis gantriesX-Z/Y-Z/X-Y,3-axis gantriesX-Y-Z,Anyinterpolation,Tripod
� Multi-axis control for linear andthree-dimensional gantries, tripodkinematic systems
� Optional handheld terminal CDSA� Point to point and complex pathcontrol
� Ethernet and CANbus interfaceInternet: .../cmxr-c1
ControllerCMXR-C2
24 VDC+20%/-15%,24 VDC+25%/-20%
2 x CANopenmasters
2-axis gantriesX-Z/Y-Z/X-Y,3-axis gantriesX-Y-Z,Anyinterpolation,Tripod
� Individual integration in higher-ordercontrollers or simple integrationof peripheral devices, for exampletracking function via vision systems,by means of integrated CoDeSys PLC
� Ideal for bonding or sealingapplications: greater processreliability and quality with defined,speed-independent switching pointson the path
� Increased flexibility: modular controlsystem for digital and analogue I/Ooptionally expandableInternet: .../cmxr-c2
Control blockCPX-CMXX
18 ... 30 V CAN bus 2-axis gantriesX-Z/Y-Z/X-Y,3-axis gantriesX-Y-Z
� Intelligent module in the CPX terminalfor the actuation of electric drive units
� Coordination of the entire motionsequence
� Actuation of 2 axis groups with max.4 axes per group
� Ethernet and CANbus interfaceInternet: .../cmxx
40 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
44
Motors and controllers >
Multi-axis controllers
TypeOperatingvoltage
Operatingvoltage rangeDC
Controlinterface Fieldbus link
Supportedkinematicsystems Description
Control blockCPX-CEC-M1
24 V DC CAN bus � Comprehensive CoDeSys functionlibrary plus CoDeSys SoftMotionlibrary
� Motion Control with up to 8synchronous electric drives and 2.5Dinterpolation
� Efficient open and closed-loop control,e.g. with manual workstations
� The only fully integrated automationplatform in the world in IP65: forstandard pneumatics, proportionalpneumatics, servopneumatics,electric drives and sensorsInternet: .../cpx-cec-m1
Power supply units
Type
Nominaloutput voltageDC
Nominaloutput current
Input voltagerange AC Input current
Power failurebridging Description
Power supplyunitSVG
24 ... 48 V 4.8 ... 20 A 100 ... 500 V 1.9 � 0.8 A,2.1 � 1.0 A,2.2 � 1.2 A,2.3 � 1.9 A,2.8 � 1.2 A,5.1 � 2.3 A
20 ... 50 ms � H-rail mounting� Mounting position: Free convectionInternet: .../svg
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 41
44
Grippers >
Software toolGripper selection A secure grip is a question of the right
calculation. In this case, calculation ofweight, direction of movement, distances,etc. The software tool immediatelydetermines which of the parallel,three-point, angle or swivel/gripper unitsbest matches your requirements, and inwhich size.This tool can be found in the electroniccatalogue for the product group, on thewebsite under Support in the Engineeringsoftware area or on the DVD under Selectionand sizing.
Parallel grippers
TypeTotal gripping forceat 6 bar, closing
Stroke per gripperjaw Position sensing
Gripping forcebackup Description
Parallel gripperHGPT
106 ... 6,300 N 1.5 ... 25 mm Via proximitysensor
During closing,During opening
� Sturdy and powerful� With T-slot guide� Suitable for external and internalgripping
� Protection against dust in gripper jawguide via sealing air
� Gripping force backup� High-force variant (F) availableInternet: .../hgpt
Parallel gripperHGPL
158 ... 2,742 N 20 ... 150 mm Via proximitysensor
� Space-saving, high forces and torques� Controlled, precise and centredgripping
� Long stroke: long guide length for thegripper jaws
� Suitable for external and internalgripping
� Opening stroke can be adjusted tooptimise timeInternet: .../hgpl
Parallel gripperHGPP
80 ... 830 N 2 ... 12.5 mm For Hall sensor,For inductivesensors
During closing, G2,During opening, G1
� High-precision gripper jaw guide� Suitable for external and internalgripping
� Highly flexible thanks to versatileattachment, mounting and applicationoptions
� Gripping force backupInternet: .../hgpp
Parallel gripperHGPC
44 ... 126 N 3 ... 7 mm Via proximitysensor
During closing, G2 � Compact, low cost, reliable operation,long service life
� High force with minimal volume� Suitable for external and internalgripping
� Gripping force backupInternet: .../hgpc
42 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
55
Grippers >
Parallel grippers
TypeTotal gripping forceat 6 bar, closing
Stroke per gripperjaw Position sensing
Gripping forcebackup Description
Parallel gripperHGP
20 ... 700 N 2 ... 12.5 mm For Hall sensor,Via proximitysensor
During closing, G2,During opening, G1
� Self-centring� Suitable for external and internalgripping
� Versatile thanks to externallyadaptable gripper fingers
� High gripping force and compact size� Max. repetition accuracyInternet: .../hgp
Parallel gripperHGPM
16 ... 35 N 2 ... 3 mm None � Micro gripper: compact, handy design� Versatile thanks to externallyadaptable gripper fingers
� Mounting options with clampingspigot, with flange mounting, with Zstroke compensationInternet: .../hgpm
Parallel gripperHGPLE
40 mm Via integratedangulardisplacementencoder
� Electrically driven gripper with longstroke
� Free, speed-controlled selection ofgripping positions
� Long stroke allows use withworkpieces of different sizes
� Adjustable gripping force for highlysensitive and large, heavy workpieces
� Very high torque resistance, very highaccuracy
� Short opening and closing times� Minimal installation costs� See product documentation on ourwebsite for gripping forceInternet: .../hgple
Three-point grippers
TypeTotal gripping forceat 6 bar, closing
Stroke per gripperjaw Position sensing
Gripping forcebackup Description
Three-pointgripperHGDT
207 ... 2,592 N 1.5 ... 10 mm Via proximitysensor
During closing,During opening
� Synchronous movement of gripperjaws
� With T-slot guide� Gripping force backup� Suitable for external and internalgripping
� Dust-proof via sealing air� High-force variant (F) availableInternet: .../hgdt
Three-pointgripperHGD
90 ... 880 N 2.5 ... 6 mm For Hall sensor,Via proximitysensor
� Self-centring� Suitable for external and internalgripping
� Versatile thanks to externallyadaptable gripper fingers
� High precision and high holding forcesInternet: .../hgd
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 43
55
Grippers >
Angle grippers
TypeTotal gripping torque at 6bar, closing Max. opening angle Position sensing Description
Angle gripperHGWM
22 ... 64 Ncm 14 ... 18.5° None � Micro angle gripper: compact, handydesign
� Mounting options with clampingspigot, with flange mounting, with Zstroke compensation
� Versatile thanks to externallyadaptable gripper fingersInternet: .../hgwm
Angle gripperHGW
22 ... 880 Ncm 40° Via proximity sensor � Self-centring� Suitable for external and internalgripping
� Versatile thanks to externallyadaptable gripper fingers
� Constant gripping torque over theentire angle rangeInternet: .../hgw
Angle gripperHGWC
22 ... 144 Ncm 30 ... 80° Via proximity sensor � Internal fixed flow control, does awaywith the need for external flow controlin 90% of applications
� High force with minimal volume� Suitable for external and internalgripping
� Repetition accuracy 0.05 mm� Compact and cost-effectiveInternet: .../hgwc
Radial grippers
TypeTotal gripping torque at 6bar, closing Max. opening angle Position sensing Description
Radial gripperHGRT
158 ... 7,754 Ncm 180° Via proximity sensor,For inductive sensors
� Secure gripping thanks to precise,polished plain-bearing guides
� Gripping force backup via compressionsprings holds the gripped workpiecesecurely in the event of pressurefailure
� Compression spring also booststhe gripping force for applicationsinvolving heavier loads
� Optimum cycle times thanks to freelyadjustable opening angle of up tomax. 90° per gripper finger. Thisprevents possible collisions due to thegripper jaws opening too wideInternet: .../hgrt
Radial gripperHGR
13 ... 500 Ncm 180° Via proximity sensor � Self-centring� Suitable for internal and externalgripping
� Constant gripping torque over theentire angle range
� Versatile thanks to externallyadaptable gripper fingersInternet: .../hgr
44 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
55
Grippers >
Radial grippers
TypeTotal gripping torque at 6bar, closing Max. opening angle Position sensing Description
Radial gripperHGRC
22 ... 144 Ncm 180° Via proximity sensor � Internal fixed flow control, does awaywith the need for external flow controlin 90% of applications
� High force with minimal volume� Suitable for external and internalgripping
� Repetition accuracy 0.05 mm� Compact and cost-effectiveInternet: .../hgrc
Swivel/gripper units
TypeTotal gripping forceat 6 bar, closing
Stroke per gripperjaw Swivel angle
Position sensing,gripper Description
Swivel/gripperunitHGDS
52 ... 130 N 2.5 ... 7 mm 210° Via proximitysensor
� Combination of parallel gripper andswivel module
� Swivel angle infinitely adjustable� Precise end stop with flexiblecushioning or integrated shockabsorberInternet: .../hgds
Internal grippers
Type Stroke of bellowsMin. diameter tobe gripped
Min. diameter tobe gripped
Max. operatingfrequency ofgripper Description
Bellows gripperDHEB
3.5 ... 25 mm 8 ... 66 mm 11 ... 85 mm 0 ... 4 Hz � 11 sizes for 8 to 85 mm grippingdiameter
� Upwards or downwards direction ofmovement of bellows
� Different bellows materials EPDM orsilicone
� Air connection at side including centrehole or central from above
� Optimised process sequence withincreased quality and prevents theworkpieces from being scratched
� Additional safety with optionalsensing via proximity switch or sensorInternet: .../dgeb
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 45
55
Grippers >
Sealed grippers
TypeTotal gripping forceat 6 bar, closing
Stroke per gripperjaw Position sensing
Gripping forcebackup Description
Parallel gripperHGPD
94 ... 3,716 N 3 ... 20 mm Via proximitysensor
During closing,During opening
� The complete sealing of the gripperensures smooth operation throughoutits entire service life in the harshest ofenvironments with dust or liquids
� The special shape of the drive pistonpermits maximum gripping forcecombined with reduced weight and anoutstanding space/force ratio
� Reliable gripping, even underextremely tough conditions thanks tothe optimal gripping force backup inthe opening and closing functions
� Highly cost-effective sensing ofthe gripping positions by means ofinductive proximity sensors that aresecurely mounted in integrated slotsand have no interfering edgesInternet: .../hgpd
Three-pointgripperHGDD
336 ... 2,745 N 4 ... 12 mm Via proximitysensor
During closing,During opening
� The complete sealing of the gripperensures smooth operation throughoutits entire service life in the harshest ofenvironments with dust or liquids
� Reliable gripping, even underextremely tough conditions thanks tothe optional gripping force backup inthe opening and closing functions
� Highly cost-effective sensing ofthe gripping positions by means ofinductive proximity sensors that aresecurely mounted in integrated slotsand have no interfering edgesInternet: .../hgdd
46 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
55
Grippers >
Software toolFeed separators This tool helps you to select the right
separator of the type HPV from Festo foryour application. Let yourself be guidedby the program and enter your generalparameters and you will receive at least onesuggestion for the product best suited toyour application.This tool can be found in the electroniccatalogue for the product group, on thewebsite under Support in the Engineeringsoftware area or on the DVD under Selectionand sizing.
Feed separators
Type Mode of operation Piston diameter Stroke
Theoretical forceat 6 bar, advancestroke Description
Feed separatorHPV
Double-acting 10 mm,14 mm,22 mm
10 ... 60 mm 45 ... 225 N � For separating workpieces in thesupply process
� Low-cost and reliable� Just one valve required for actuation� For position sensingInternet: .../hpv
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 47
55
Handling systems >
Software toolConfigurator Compile a product with numerous features
reliably and quickly with the help of theconfigurator.Select all the required product featuresstep-by-step. The use of logic checksensures that only correct configurations areavailable for selection.The configurator is part of the electroniccatalogue and is not available as a separatesoftware program.
Handling modules
Type Size
Theoreticalforce at 6bar
Minimumcycle time Y stroke Z stroke
Repetitionaccuracy Description
Handling moduleHSP
12,16,25
40 ... 65 N 0.6 ... 1 s 52 ... 170mm
20 ... 70mm +/-0.01mm,+/-0.02 mm
� Function module for the automatictransfer, feed and removal of smallparts in extremely confined spaces
� Guided vertical and horizontal motionsequence
� High precision and good rigidity� Compact design� Extremely short cycle times� Cost-optimised� Stroke adjustment along Y and Z-axesInternet: .../hsp
Handlingmodule,pneumaticHSW-AP, HSW-AS
10,12,16
30 ... 55 N 0.6 ... 1 s 80 ... 100mm
� Function module for the automatictransfer, feed and removal of smallparts in extremely confined spaces
� Guided swivel and linear motion� High precision and good rigidity� HSW-AP: pneumatic, with swivelmodule DSM; HSW-AS: without drive,with drive shaft
� Fast and compact� Low-cost and ideal for universal useInternet: .../hsw
48 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
66
Handling systems >
Handling modules
Type Size
Theoreticalforce at 6bar
Minimumcycle time Y stroke Z stroke
Repetitionaccuracy Description
Handlingmodule, electricHSW-AE
10,12,16
0.8 ... 1.2 s 80 ... 100mm
� Function module for the automatictransfer, feed and removal of smallparts in extremely confined spaces
� Guided swivel and linear motion� High precision and good rigidity� Electric, with motor unit MTR-DCI� Freely positionable, freely selectablespeed
� Smooth motion sequence� Simple commissioning using teach-inprocedureInternet: .../hsw
Pick & Place
Type Effective load Description
Pick & Place 1.0DGSL, SLT, SLTE
0 ... 4 kg � Compact design� Lightweight components� High load carrying capacity andprecision
� Range of stroke lengths� Very short cycle times� Various cushioning variants� High functionality thanks tothe optimal clamping unit andend-position locking
� Freely positionableInternet: .../pick
Pick & Place 2.0HMP, DGSL, SLT,SLTE, EGSA
0 ... 6 kg � Very rigid and precise even with longstrokes
� Intermediate position along Y andZ-axes
� Clamping unit along Y and Z-axes� Freely positionable along Y and Z-axes� Narrow front end area� Highly dynamic responseInternet: .../pick
Pick & Place 3.0HMP
0 ... 10 kg � Very rigid and precise even with longstrokes
� Very high load carrying capacitythanks to high-quality guides
� Intermediate position� Clamping unit and electrical interfacealong both axes
� Highly dynamic response witheffective loads up to 6 kgInternet: .../pick
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 49
66
Handling systems >
Linear gantries
Type Effective load Description
Linear gantry 1.0SLG, DGSL, SLT,SLTE
0 ... 2 kg � Very compact design thanks to the flatdrive along the Y-axis and mini slidealong the Z-axis
� Multiple intermediate positions alongthe Y-axis
� Positionable anywhere along theZ-axis
� High precision in end and intermediatepositions thanks to metal stopsInternet: .../portal
Linear gantry 2.0DGPL, DGC, DGE
0 ... 4 kg � Choice of pneumatic or electric(toothed belt or spindle) drive forhorizontal axis
� Any number of intermediate positionsalong the Y-axis with servopneumaticor electric axis
� Additional functions such asintermediate positions and clampingunit along the Z-axis
� DUO system structure for particularlyhigh loadsInternet: .../portal
Linear gantry 3.0DGPL, DGC, DGE,DGSL, SLT, SLTE
0 ... 6 kg � Choice of pneumatic or electric(toothed belt or spindle) drive forhorizontal axis
� Very high dynamic response thanksto small moving load along the Y andZ-axes
� Any number of intermediate positionsalong the Y-axis with servopneumaticor electric axis
� DUO system structure for particularlyhigh loadsInternet: .../portal
Linear gantry 4.0DGPL, DGC, DGE,HMP, DGEA
0 ... 10 kg � Choice of pneumatic or electric(toothed belt or spindle) drive forhorizontal axis
� Any number of intermediate positionsalong the Y and Z-axes
� Extremely rigid Z-axis with additionalfunctions such as intermediatepositions and clamping unit
� Highly dynamic response along theZ-axis due to the low moving load ofthe drive
� DUO system structure for particularlyhigh loadsInternet: .../portal
50 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
66
Handling systems >
Three-dimensional gantries
Type Effective load Description
Three-dimensionalgantry 1.0DGE, DGPL, DGC
0 ... 4 kg � Choice of pneumatic or electric drivefor horizontal X and Y-axes
� Any number of intermediatepositions along the X and Y-axes withservopneumatic or electric axes
� Additional functions such asintermediate positions (withthrough-travel capability) andclamping cartridge along the Z-axis
� DUO system type for particularly highloadsInternet: .../portal
Three-dimensionalgantry 2.0DGE, DGPL, DGC,DGSL, SLT, SLTE
0 ... 6 kg � Choice of pneumatic or electrical drivefor horizontal X and Y-axes
� Any number of intermediatepositions along the X and Y-axes withservopneumatic or electric axes
� Very high dynamic response thanks todouble slide along the X-axis
� Pneumatic or electric drive on theZ-axis
� DUO system type for particularly highloadsInternet: .../portal
Three-dimensionalgantry 3.0DGE, DGPL, DGC,DGEA
0 ... 10 kg � Choice of pneumatic or electric drivefor all axes
� Any number of intermediatepositions along the X and Y-axes withservopneumatic or electric axes
� Choice of guide characteristics anddrive concepts
� DUO system type for particularly highloadsInternet: .../portal
Three-dimensionalgantry 4.0DGE, DGPL, DGC,HMP
0 ... 10 kg � Choice of pneumatic or electric drivefor horizontal X and Y-axes
� Any number of intermediatepositions along the X and Y-axes withservopneumatic or electric axes
� Additional functions such asintermediate positions and clampingunit along the Z-axis
� DUO system type for particularly highloadsInternet: .../portal
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 51
66
Handling systems >
Planar surface gantries
Type Effective load Description
Planar surfacegantry 1.0 � 3.0DGE, DGP
0 ... 6 kg � Repetition-accurate, centralised directconnection of axes
� High level of process reliability thanksto integration of cables in energychains
� Defined handling system mountinginterfaces for a mounting frame
� Electric with toothed belt or spindledrive, pneumatic or servopneumatic
� Any number of intermediate positionsalong the X and Y-axesInternet: .../portal
Planar surfacegantry 4.0 � 5.0DGE, FDG
0 ... 50 kg � Repetition-accurate, centralised directconnection of axes
� High level of process reliability thanksto integration of cables in energychains
� Defined handling system mountinginterfaces for a mounting frame
� Electric with toothed belt or spindledrive, pneumatic or servopneumatic
� Any number of intermediate positionsalong the X and Y-axesInternet: .../portal
52 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
66
Vacuum technology >
Software toolVacuum selection Which suction cup for which surface and
which movement? Don�t experiment �calculate! This software tool even enablesa differentiation between linear and rotarymovements.This tool can be found on the website underSupport in the Engineering software area asa download or on the DVD under Selectionand sizing.
Vacuum generators
TypeNominal sizeof laval nozzle
Ejectorfeatures
Integratedfunction Max. vacuum
Max. suctionrate withrespect toatmosphere Description
VacuumgeneratorOVEM
0.45 ... 1.4 mm Standard,High suctionrate,High vacuum
Ejectorpulse valve,electrical,Flow controlvalve,On-off valve,electrical,Filter,Air-savingcircuit,electrical,Non-returnvalve,Silencer, open,Vacuum switch
93% 6 ... 50.5 l/min � Compact design� Monitoring and visualisation of thevacuum by means of vacuum sensorwith LCD display
� Central electrical connection via M12plug
� Maintenance-free operation andreduced noise level throughintegrated, open silencer
� Integrated filter with inspectionwindow for maintenance display
� Adjustable ejector pulseInternet: .../ovem
VacuumgeneratorVN
0.45 ... 3 mm In-line,Standard,High suctionrate,High vacuum
Pneumaticejector pulse,Silencer, open,Vacuum switch
86 ... 93% 6.1 ... 339l/min
� Can be used directly in the work space� Available as straight or T-shapedhousing
� No wearing parts� With or without vacuum switch� Integrated ejector pulse, electricalactuation for vacuum ON/OFF,combination of ejector pulse andactuation optionalInternet: .../vn
VacuumgeneratorcartridgeVN
0.45 ... 2 mm Standard,High suctionrate,High vacuum
92 ... 93% 7.2 ... 184l/min
� For fitting into customised housing fordecentralised vacuum generationInternet: .../vn
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 53
77
Vacuum technology >
Vacuum generators
TypeNominal sizeof laval nozzle
Ejectorfeatures
Integratedfunction Max. vacuum
Max. suctionrate withrespect toatmosphere Description
VacuumgeneratorVAD
0.5 ... 1.5 mm High vacuum 80% � Sturdy aluminium housing� Connection for additional externalreservoir
� Maintenance-free� See product documentation on ourwebsite for max. suction rateInternet: .../vad
VacuumgeneratorVAK
1 mm High vacuum Pneumaticejector pulse
80% � Sturdy aluminium housing� Connection for additional externalreservoir
� Built-in reservoir� Reliable setting down of workpieces� See product documentation on ourwebsite for max. suction rateInternet: .../vak
VacuumgeneratorVADM, VADMI
0.45 ... 3 mm High vacuum Ejectorpulse valve,electrical,Flow controlvalve,On-off valve,electrical,Filter,Air-savingcircuit,electrical,Non-returnvalve,Vacuum switch
85% � Compact and sturdy design� Built-in solenoid valve (on/off )� Filter with contamination indicator� Available with air-saving circuit,vacuum switch
� Reliable setting down of workpieces� See product documentation on ourwebsite for max. suction rateInternet: .../vadm
VacuumgeneratorVAD-M, VAD-M-I
0.7 ... 2 mm High vacuum Ejectorpulse valve,electrical,On-off valve,electrical
85 ... 90% � Compact and sturdy design� Built-in solenoid valve (on/off )� Reliable setting down of workpieces� Maintenance-free because there areno moving partsInternet: .../vad-m
54 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
77
Vacuum technology >
Suction cups
TypeSuction cupsize
Suction cupdiameter
Breakawayforce at 70%vacuum Design
Informationon suction cupmaterials Description
Suction gripperESG
10x30 mm,15x45 mm,20x60 mm,25x75 mm,30x90 mm,4x10 mm,4x20 mm,6x10 mm,6x20 mm,8x20 mm,8x30 mm
2 ... 200 mm 0.1 ... 1,610 N Oval, standard,Round,bellows, 1.5convolutions,Round,bellows, 3.5convolutions,Round, bell-shaped,Round,standard,Round, extradeep
FPM,NBR,Polyurethane,TPE-U (PU),VMQ (silicone)
� Modular product of suction cup holderand suction cup with over 2,000variants
� Available with angle compensator,height compensator, filter
� 15 suction cup diameters� 5 suction cup shapes� Suction cup volume: 0.002 ... 245 cm³� Min. workpiece radius: 10 ... 680 mm� Vacuum port: push-in connector orbarbed fitting connection for plastictubing, threaded connectionInternet: .../esg
Suction cupholderESH
Vacuum porton top,Vacuum port atside,With heightcompensator
� With or without height compensator� 6 holder sizes� 8 holder types� 3 tubing connectionsInternet: .../ESH
Suction cupESS
10x30 mm,15x45 mm,20x60 mm,25x75 mm,30x90 mm,4x10 mm,4x20 mm,6x10 mm,6x20 mm,8x20 mm,8x30 mm
2 ... 200 mm 0.1 ... 1,610 N Bellows,Oval, standard,Round,bellows, 1.5convolutions,Round,bellows, 3.5convolutions,Round, bell-shaped,Round,standard,Round, extradeep
FPM,NBR,Polyurethane,TPE-U (PU),VMQ (silicone)
� Suction cup consisting of the suctioncup itself, plus the support plate withmounting
� Suction cup volume: 0.002 ... 245 cm³� Min. workpiece radius: 10 ... 680 mm� Mounting for suction cup holder:female thread, male thread, push-inconnectorInternet: .../ess
Suction cupESV
20 ... 200 mm 9.8 ... 1,610 N Bellows,Round,bellows, 1.5convolutions,Round,bellows, 3.5convolutions,Round, bell-shaped,Round,standard,Round, extradeep
FPM,NBR,Polyurethane,TPE-U (PU),VMQ (silicone)
� Suction cup wearing part� Easily interchangeable� Suction cup volume: 0.318 ... 245 cm³� Min. workpiece radius: 10 ... 680 mmInternet: .../esv
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 55
77
Vacuum technology >
Suction cups
TypeSuction cupsize
Suction cupdiameter
Breakawayforce at 70%vacuum Design
Informationon suction cupmaterials Description
Suction cup,bellows suctioncupVAS, VASB
1 ... 125 mm 0.035 ... 606 N Vacuum porton top,Vacuum port atside,Round,bellows, 1.5convolutions,Round,standard
NBR,TPE-U (PU),VMQ (silicone)
� Sturdy and reliable� Suction cups with fixed connectingthread
� 12 suction cup diameters� Round suction cup shape, bellows� Vacuum connection on top, at side� Free of copper, PTFE and silicone� Screw-in threadInternet: .../vas
56 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
77
Valves >
Standards-based directional control valves
Type Actuation typePneumaticconnection 1
Standardnominal flowrate Valve function
Electricalconnection Description
Solenoid valve,pneumatic valveVSVA, VSPA
Electric,pneumatic
Sub-basesize 1 to ISO5599-1,Sub-basesize 1 to ISO5599-2,Sub-base size18 mm to ISO15407-1,Sub-base size18 mm to ISO15407-2,Sub-basesize 2 to ISO5599-1,Sub-basesize 2 to ISO5599-2,Sub-base size26 mm to ISO15407-1,Sub-base size26 mm to ISO15407-2
400 ... 2,900l/min
2x3/2-way,singlesolenoid,closed,2x3/2-way,singlesolenoid,open,2x3/2-way,singlesolenoid,open/closed,3/2-way, singlesolenoid,open/closed,5/2-way,doublesolenoid,5/2-way,doublesolenoid,dominant,5/2-way, singlesolenoid,5/3-way,pressurised,5/3-way,exhausted,5/3-way,closed,5/3-way,connection 2pressurised, 4exhausted
2-pin,3-pin,4-pin,Type C,M12x1,M8x1,Plug,Central plug,With protectiveearthconductor,To DIN EN175301-803,to ISO15407-2,to ISO 5599-2,Withoutprotectiveearthconductor,Round design
� Sturdy metal design� Broad range of functions� Highly flexible, modular valve range� Vertical stacking with pressureregulator etc.Internet: .../vsva
Solenoid valve,pneumatic valveMN1H, MFH,MDH, MEBH,JMN1H, JMFH,JMDH, JMEBH,VL, J, JD
Electric,pneumatic
Connectingplate,Sub-basesize 1 to ISO5599-1,Sub-basesize 2 to ISO5599-1,Sub-basesize 3 to ISO5599-1,Sub-base size4 to ISO 5599-1
1200 ... 6,000l/min
5/2-way,doublesolenoid,5/2-way,doublesolenoid,dominant,5/2-way, singlesolenoid,5/3-way,pressurised,5/3-way,exhausted,5/3-way,closed
Type A,M12x1,Plug,Central plug,To DIN 43650,Round design,Square design
� Sturdy metal design� Extensive range of electricalconnection options
� Port pattern to ISO 5599-1Internet: .../iso 5599-1
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 57
88
Valves >
Standards-based directional control valves
Type Actuation typePneumaticconnection 1
Standardnominal flowrate Valve function
Electricalconnection Description
Solenoid valveNVF3
Electric G1/4,NPT1/4-18
900 l/min 5/2-way, singlesolenoid,closed,5/2-way, singlesolenoid
� Port pattern to Namur� Direct mounting on drives� Optional variants for use in Ex Zone I� FlatInternet: .../namur
Solenoid valveVSNB
Electric G1/4 950 l/min 5/2-way,doublesolenoid,5/2-way, singlesolenoid,5/2-way and3/2-way, singlesolenoid
Type A,To DIN EN175301-803
� Port pattern to Namur� Direct mounting on drives� Optional variants for use in Ex Zone I� ShortInternet: .../namur
Universal directional control valves, individual valves
Type Actuation typePneumaticconnection 1
Standardnominal flowrate Valve function
Electricalconnection Description
Solenoid valveVUVG
Electric G1/8,M3,M5,M7
90 ... 780 l/min 2x3/2-way,singlesolenoid,closed,2x3/2-way,singlesolenoid,open,2x3/2-way,singlesolenoid,open/closed,5/2-way,doublesolenoid,5/2-way, singlesolenoid,5/3-way,pressurised,5/3-way,exhausted,5/3-way,closed
Via E-box � Compact� Easy mounting� Wide choice of variants� High flow rate relative to its sizeInternet: .../vuvg
58 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
88
Valves >
Universal directional control valves, individual valves
Type Actuation typePneumaticconnection 1
Standardnominal flowrate Valve function
Electricalconnection Description
Solenoid valveVUVB
Electric Connectingplate,QS-6,QS-8
200 ... 1,000l/min
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,4/2-way,doublesolenoid,4/2-way, singlesolenoid,5/2-way,doublesolenoid,5/2-way, singlesolenoid
Type C,Plug,to EN 175301-803,Via sub-base
� In-line valve� Semi in-line valve� Sub-bases for individual valves� Manifold rail for valve manifold withindividual electrical connection or forvalve terminal with electrical multi-pinconnection
� Electrical connection via plug, squaredesign to EN 175301-803, type CInternet: .../vuvb
Solenoid valveCPE10, CPE14,CPE18, CPE24
Electric,Pneumatic
G1/4,G1/8,G3/8,M5,M7,QS-10,QS-12,QS-4,QS-6,QS-8
180 ... 3,200l/min
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,5/2-way,doublesolenoid,5/2-way, singlesolenoid,5/3-way,pressurised,5/3-way,exhausted,5/3-way,closed
2-pin,4-pin,Type C,M8x1
� High flow rate relative to its size� Broad range of functions� Comprehensive valve rangeInternet: .../cpe
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 59
88
Valves >
Universal directional control valves, individual valves
Type Actuation typePneumaticconnection 1
Standardnominal flowrate Valve function
Electricalconnection Description
Solenoid valveVMPA1
Electric M7 230 ... 360l/min
2x2/2-way,singlesolenoid,closed,2x3/2-way,singlesolenoid,closed,2x3/2-way,singlesolenoid,open,2x3/2-way,singlesolenoid,open/closed,3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,5/2-way,doublesolenoid,5/2-way, singlesolenoid,5/3-way,pressurised,5/3-way,exhausted,5/3-way,closed
4-pin,M8x1,Plug,To EN 60947-5-2
� Supplements the valve terminals MPA� Mounted on individual sub-base� Comprehensive valve rangeInternet: .../vmpa1
60 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
88
Valves >
Universal directional control valves, individual valves
Type Actuation typePneumaticconnection 1
Standardnominal flowrate Valve function
Electricalconnection Description
Solenoid valveCPASC1, CPPSC1
Electric Connectingplate
150 ... 220l/min
2x2/2-way,singlesolenoid,closed,2x3/2-way,singlesolenoid,closed,2x3/2-way,singlesolenoid,open,3/2-way, singlesolenoid,closed,5/2-way,doublesolenoid,5/2-way, singlesolenoid,5/3-way,pressurised,5/3-way,exhausted,5/3-way,closed
3-pin,Plug
� Wide choice of variants� Comprehensive valve rangeInternet: .../cpasc1
Solenoid valve,pneumatic valve,Tiger 2000MFH, MVH, JMFH,JMVH, VL, J
Electric,pneumatic
G1/8,G1/4,G3/8
750 ... 2,600l/min
5/2-way,doublesolenoid,5/2-way, singlesolenoid,5/3-way,pressurised,5/3-way,exhausted,5/3-way,closed
Type B,To DIN EN175301-803,Via F coil, tobe orderedseparately
� Sturdy and reliable� Wide range of voltagesInternet: .../tiger 2000
Solenoid valve,pneumatic valve,Tiger ClassicMFH, MOFH,JMFH, JMFDH,VL/O, VL, JH, JDH
Electric,pneumatic
G1/8,G1/4,G1/2,G3/4
500 ... 7,500l/min
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,5/2-way,doublesolenoid,5/2-way,doublesolenoid,dominant,5/2-way, singlesolenoid,closed,5/2-way, singlesolenoid
Via F coil, tobe orderedseparately
� Sturdy and reliable� Wide range of voltages� All-metal valveInternet: .../tiger classic
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 61
88
Valves >
Universal directional control valves, individual valves
Type Actuation typePneumaticconnection 1
Standardnominal flowrate Valve function
Electricalconnection Description
Solenoid valve,pneumatic valve,midi pneumaticMEBH, MOEBH,MEH, MOEH,JMEBH, JMEH,VL, J
Electric,pneumatic
Connectingplate,G1/8
200 ... 700l/min
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,5/2-way,doublesolenoid,5/2-way, singlesolenoid,5/3-way,pressurised,5/3-way,exhausted,5/3-way,closed
Plug, squaredesign to EN175 301-803,type C
� Semi in-line valve� Sub-base valve� Midi pneumatic: 18 mm width� Manifold assembly for 2 ... 10 valvesor individual mounting
� Electrical connection via plug, squaredesign to EN 175301-803, type C
� Operating voltage 24 V DC, 110/230V AC (50 ... 60 Hz)Internet: .../midi
Application-specific directional control valves
Type Actuation typePneumaticconnection 1
Standardnominal flowrate Valve function
Electricalconnection Description
Solenoid valveMHA1, MHP1
Electric Connectingplate,QS-3,QS-4,Prepared forQSP10
10 ... 30 l/min 2/2-way, singlesolenoid,closed,2x2/2-way,singlesolenoid,closed,3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid, open
Plug,Plug KMH
� Semi in-line valve� Sub-base valve� Miniature valve: Grid dimension 10mm
� Connecting plates� Manifold block for 2 ... 10 valves� Switching times down to 4 ms� Operating voltage 5, 12 or 24 V DCInternet: .../mh1
Solenoid valveMHE2, MHP2,MHA2, MHE3,MHP3, MHA3,MHE4, MHP4,MHA4
Electric Connectingplate,G1/4,G1/8,M7,QS-4,QS-6,QS-8
90 ... 400 l/min 3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,5/2-way, singlesolenoid
2-pin,Cable,Plug
� In-line valve� Semi in-line valve� Sub-base valve� Fast-switching valve: switching timesdown to 2 ms
� Direct mounting, individual sub-base,manifold assembly
� Manifold block for 2 ... 10 valves� Grid dimension 14, 19, 24 mm� Operating voltage 24 V DCInternet: .../mh2
Solenoid valveMHJ9, MHJ10
Electric Connectingplate,QS-4,QS-6
50 ... 160 l/min 2/2-way, singlesolenoid,closed
2-pin,3-wire,Cable,Plug KMH
� Sub-base valve� Individual valve with integrated QSfitting
� For very fast sorting applications withup to 1,000 Hz
� Very long service life > 2 billionswitching cycles
� Outstanding reproducibilityInternet: .../mhj9
62 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
88
Valves >
Application-specific directional control valves
Type Actuation typePneumaticconnection 1
Standardnominal flowrate Valve function
Electricalconnection Description
Solenoid valveVOVG
Electric Connectingplate,M5,M7
180 ... 200l/min
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,5/2-way, singlesolenoid
2-pin,Plug
� In-line valve� Semi in-line valve� Sub-base valve� Direct mounting, manifold assembly� Manifold rail for 2 ... 10 valves� Width 10, 12, 25 mm� Operating voltage 5, 12 or 24 V DCInternet: .../vovg
Solenoid valveVOFC, VOFD
Electric G1/2,G1/4,NPT1/4-18,Namur portpattern
450 ... 3,000l/min
3/2-way, singlesolenoid,closed,5/2-way,doublesolenoid,5/2-way, singlesolenoid
Terminalbox, cableentry threadM20x1.5
� For outdoor use under harsh ambientconditions, e.g. in refining thanksto sturdy design and high corrosionresistance
� Piloted piston spool and pistonpoppet valves
� In-line valve� Variants with TÜV approval up to SIL4to IEC 61508
� Shuttle valve can switch betweeninternal and external pilot airInternet: .../vofc
Solenoid valveCDVI5.0
Electric Connectingplate
300 ... 650l/min
2/2-way, singlesolenoid,closed,2/2-way, singlesolenoid,open,2x3/2-way,singlesolenoid,closed,2x3/2-way,singlesolenoid,open,3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,5/2-way,doublesolenoid,5/2-way, singlesolenoid,5/3-way,pressurised,5/3-way,exhausted,5/3-way,closed
Multi-pin plug,cable 10 m
� Sub-base valve� Corrosion-resistant� Easy-to-clean design� Also available as valve terminal type15 CDVI
� Operating voltage 24 V DCInternet: .../cdvi5.0
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 63
88
Valves >
Manually actuated directional control valves: Swivel lever valves
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Hand lever valveVHER
4/3-way,exhausted,4/3-way,closed
Direct 170 ... 4,300l/min
G1/2,G1/4,G1/8,M5
-0.95 ... 10 bar � With lever and detent� Lever in metal or polymer design� Front panel mounting, through ormounting holes
� Can also be used as 3/3-way valve bysealing port 2Internet: .../vher
Hand lever valveH-3-1/4-B,H-5-1/4-B
3/2-way,doublesolenoid,5/2-way,doublesolenoid
Direct,Piloted
550 ... 600l/min
G1/4 -0.95 ... 10 bar � With hand lever� Suitable for vacuum operation� Die-cast aluminium designInternet: .../h-3-1/4
Manually actuated directional control valves: Pushbutton valves
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Pushbutton valveF-3-M5
3/2-way, singlesolenoid,closed
Direct 80 l/min M5 -0.95 ... 8 bar � With pedal� Suitable for vacuum operation� Directly actuated� Sturdy die-cast zinc designInternet: .../f-3-m5
Pushbutton valveK/O-3-PK
3/2-way, singlesolenoid,open/closed
Direct 80 l/min PK-3 0 ... 8 bar � With button switch� Polymer design� Ducted exhaust airInternet: .../k/o-3-pk
Pushbutton valveK-3-M5
3/2-way, singlesolenoid,closed
Direct 80 l/min M5 -0.95 ... 8 bar � With button switch� Suitable for vacuum operation� Sturdy die-cast zinc designInternet: .../k-3
Pushbutton valveT-5/3-1/4
5/3-way,closed
Piloted 680 l/min G1/4 2 ... 10 bar � With pushbutton� For positioning, for stopping in theevent of an EMERGENCY-STOP and forholding a double-acting cylinder inany position
� Aluminium designInternet: .../t-5/3-1/4
Robust palmoperated valvePV-3-1/8
3/2-way, singlesolenoid,closed
Direct 80 l/min G1/8 -0.95 ... 8 bar � With large actuating surface� For heavy duty actuation� Suitable for vacuum operationInternet: .../pv-3
64 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
88
Valves >
Manually actuated directional control valves: Finger lever valves
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Finger lever valveTH/O-3-PK-3
3/2-way, singlesolenoid,closed
Direct 80 l/min PK-3 0 ... 8 bar � With finger lever� Polymer design� Ducted exhaust airInternet: .../th*
Finger lever valveTH-3-M5,TH-3-1/4-B,TH-5-1/4-B,THO-3-1/4-B
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,5/2-way, singlesolenoid
Direct 80 ... 600 l/min G1/4,M5
-0.95 ... 10 bar � With finger lever� Suitable for vacuum operation� Die-cast zinc or die-cast aluminiumdesignInternet: .../th-3-m5
Finger lever valveH-4/3
4/3-way,exhausted
Piloted 125 l/min M5 0... 8 bar � With detenting finger lever� Front panel mounting or mounting onsub-base
� Aluminium designInternet: .../h-4/3
Manually actuated directional control valves: Toggle lever valves
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Toggle lever valveKH/O-3-PK-3
3/2-way, singlesolenoid,open/closed
Direct 80 l/min PK-3 0 ... 8 bar � With toggle lever� Directly actuated� Polymer design� Ducted exhaust airInternet: .../kh*
Toggle lever valveH-5/3-1/4
5/3-way,closed
Piloted 680 l/min G1/4 2 ... 10 bar � With toggle lever� For positioning, for stopping in theevent of an EMERGENCY-STOP and forholding a double-acting cylinder inany position
� Aluminium designInternet: .../h-5/3-1/4
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 65
88
Valves >
Manually actuated directional control valves: Foot valves
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Foot valve withdetentF-3-1/4-B,FO-3-1/4-B,F-5-1/4-B
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,5/2-way, singlesolenoid
Direct 550 ... 600l/min
G1/4 -0.95 ... 10 bar � With foot pedal� Suitable for vacuum operation� Sturdy die-cast zinc designInternet: .../fo-3
Foot valve withdetentFP-3-1/4-B,FPB-3-1/4,FP-5-1/4-B
3/2-way, singlesolenoid,closed,5/2-way, singlesolenoid
Direct 550 ... 600l/min
G1/4 -0.95 ... 10 bar � With foot pedal with detent� Suitable for vacuum operation� Sturdy die-cast zinc designInternet: .../fpb-3
Manually actuated directional control valves: Selector switches
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Selector switchHW-6-38
3/6 Direct 180 l/min M5 0 ... 8 bar � With rotary knob and arrow� Front panel mounting or mounting onsub-base
� With six switching positionsInternet: .../hw-6
Manually actuated directional control valves: Front panel valves
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Front panel valveSV/O-3-PK-3x2
2x3/2-way,singlesolenoid,closed
Direct 70 l/min PK-3 0 ... 8 bar � Basic valve for actuator attachmentssuch as toggle levers, selectorswitches
� Polymer design� Reliable coupling system for rapidassembly and dismantlingInternet: .../sv/o
Front panel valveSVS-3-1/8, SVS,SVSO-3-1/8
3/2-way, singlesolenoid,closed,4/2-way, singlesolenoid
Direct 120 l/min G1/8 3.5 ... 8 bar � Basic valve for actuator attachmentssuch as pushbutton actuators,mushroom pushbuttons, mushroomactuators, selector switches, togglelevers, key actuators
� Reliable coupling system enablesrapid assembly and dismantling
� Front panel mountingInternet: .../svos
66 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
88
Valves >
Manually actuated directional control valves: Front panel valves
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Front panel valveSV-3-M5,SV-5-M5-B
3/2-way, singlesolenoid,closed,5/2-way, singlesolenoid
Direct 65 ... 95 l/min -0.95 ... 8 bar � Basic valve for actuator attachmentssuch as pushbutton actuators,mushroom pushbuttons, mushroompushbuttons with detent, selectorswitches, toggle levers
� Front panel mounting� Suitable for vacuum operation� Plastic design� Reliable coupling system for rapidassembly and dismantlingInternet: .../sv-3
Mechanically actuated directional control valves: Stem actuated valves
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Stem actuatedvalveV/O-3-PK-3,V/O-3-1/8
3/2-way, singlesolenoid,open/closed
Direct 80 ... 140 l/min G1/8,PK-3
-0.95 ... 8 bar � With plunger or actuator attachmentsas required
� Through-holes in housing� Polymer or aluminium designInternet: .../v/o-3
Stem actuatedmicro valveS-3-PK-3-B,SO-3-PK-3-B
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid, open
Direct 60 l/min PK-3 -0.95 ... 8 bar � With plunger for actuator attachmentssuch as pushbutton actuators, togglelevers
� Dimensions to DIN 41635, type A� Polymer designInternet: .../s-3-pk
Stem actuatedvalveVS-3-1/8,VS-4-1/8,VOS-3-1/8
3/2-way, singlesolenoid,closed,4/2-way, singlesolenoid
Piloted 120 l/min G1/8 3.5 ... 8 bar � With plunger� Aluminium design� Minimal actuating force with pilotcontrol
� Can also be used as 2/2-way valve byplugging the exhaustInternet: .../vos
Stem actuatedvalveV-3-1/4-B,V-5-1/4-B,VO-3-1/4-B
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,5/2-way, singlesolenoid
Direct 550 ... 600l/min
G1/4 -0.95 ... 10 bar � With plunger� Suitable for vacuum operation� Directly actuated� Die-cast aluminium designInternet: .../vo-3
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 67
88
Valves >
Mechanically actuated directional control valves: Stem actuated valves
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Limit valveSDK-3-PK-3,SDK-4-PK-3
3/2-way, singlesolenoid,closed
Direct 16 l/min PK-3 0 ... 8 bar � Can be used for stroke-dependentsignal generation as a limit switch andfixed stop
� For end-position sensing and positioncontrol
� High accuracy� Stainless steel designInternet: .../sdk
Limit stop signalgeneratorSDV-2-B, SDV-3
3/2-way,closed, singlesolenoid
Direct 16 l/min PK-3 0 ... 8 bar � Can be used for stroke-dependentsignal generation as a limit switch andfixed stop
� For end-position sensing and positioncontrol
� High precision and low actuatingforces
� Compact dimensions� Use in contaminated environmentsInternet: .../sdv
Mechanically actuated directional control valves: Roller lever valves
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Roller lever valveR/O-3-PK-3
3/2-way, singlesolenoid,open/closed
Direct 80 l/min PK-3 0 ... 8 bar � With roller lever� Directly actuated� Polymer design� Ducted exhaust airInternet: .../r/o-3-pk
Roller lever valveRS-3-1/8,RS-4-1/8,ROS-3-1/8
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,4/2-way, singlesolenoid
Piloted 120 l/min G1/8 3.5 ... 8 bar � With roller lever� Indirectly actuated� Aluminium design� Minimal actuating force with pilotcontrol
� Can also be used as 2/2-way valve byplugging the exhaustInternet: .../ros-3
Roller lever valveR-3-M5,R-3-1/4-B,R-5-1/4-B,RO-3-1/4-B
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,5/2-way, singlesolenoid
Direct 80 ... 600 l/min G1/4,M5
-0.95 ... 10 bar � With roller lever� Suitable for vacuum operation� Directly actuated� Die-cast aluminium designInternet: .../ro-3
68 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
88
Valves >
Mechanically actuated directional control valves: Roller lever valves with idle return
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Roller lever valvewith idle returnL/O, L/O-3-PK-3
3/2-way, singlesolenoid,open/closed
Direct 80 l/min PK-3 0 ... 8 bar � With roller lever with idle return� Directly actuated� Polymer design� Ducted exhaust airInternet: .../l/o-3
Toggle lever valveLS-3-1/8,LS-4-1/8,LOS-3-1/8
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,4/2-way, singlesolenoid
Piloted 120 l/min G1/8 3.5 ... 8 bar � With toggle lever� Indirectly actuated� Aluminium design� Minimal actuating force with pilotcontrol
� Can also be used as 2/2-way valve byplugging the exhaustInternet: .../los-3
Roller lever valvewith idle returnL-3-M5,L-3-1/4-B,L-4-1/4-B,LO-3-1/4-B
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid,open,5/2-way, singlesolenoid
Direct 80 ... 600 l/min G1/4,M5
-0.95 ... 10 bar � With roller lever� Suitable for vacuum operation� Directly actuated� Die-cast aluminium designInternet: .../lo-3
Mechanically actuated directional control valves: Swivel lever valves
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Swivel lever valveRW/O-3-1/8
3/2-way, singlesolenoid,open/closed
Direct 140 l/min G1/8 -0.95 ... 8 bar � Basic valve for actuator attachmentssuch as swivel lever short, long, swivellever rod
� Suitable for vacuum operation� Directly actuated� Aluminium designInternet: .../rw/o-3
Pneumatic limitvalveRWN/O-3-1/8-B
3/2-way, singlesolenoid,open/closed
Direct 120 l/min G1/8 -0.95 ... 8 bar � Directly actuated in one direction� Suitable for vacuum operation� Aluminium designInternet: .../rw/o-3
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 69
88
Valves >
Mechanically actuated directional control valves: Swivel lever valves
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Swivel lever valveRW-3-M5
3/2-way, singlesolenoid,closed
Direct 80 l/min M5 -0.95 ... 8 bar � With swivel lever� Additional actuator attachments suchas swivel lever short, long, swivellever rod
� Suitable for vacuum operation� Directly actuated� Sturdy die-cast zinc designInternet: .../rw-3
Mechanically actuated directional control valves: Whisker valves
Type Valve function Type of control
Standardnominal flowrate
Pneumaticworking line
Operatingpressure Description
Whisker valveFVS-3-1/8,FVSO-3-1/8
3/2-way, singlesolenoid,closed,3/2-way, singlesolenoid, open
Piloted 120 l/min G1/8 3.5 ... 8 bar � With whisker� Especially suitable for sensing ofdissimilar workpieces or workpiecesnot precisely in position
� Indirectly actuated� Aluminium design� Minimal actuating force with pilotcontrol
� Can also be used as 2/2-way valve byplugging the exhaustInternet: .../fvs-3
Non-return valves and quick exhaust valves
Type
Pneumaticconnection1
Standardnominalflow rate
Standardflow rateexhaust6->0 bar
Standardnominalflow ratepressuri-sation 6->5bar
Standardnominalflow rate1->2 (6-5)
Operatingpressure Description
Non-return valveH, HA, HB
G1/8,G1/4,G3/8,G1/2,G3/4,M5,QS-4,QS-6,QS-8,QS-10,QS-12,R1/8,R1/4,R3/8,R1/2
115 ...2,230 l/min
1,000 ...5,900 l/min
-1 ... 12 bar � Valve function: Non-return function� Screw-in or in-line installation� With connecting thread at both ends,push-in connector at both ends,thread/push-in connectorInternet: .../h-qs
70 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
88
Valves >
Non-return valves and quick exhaust valves
Type
Pneumaticconnection1
Standardnominalflow rate
Standardflow rateexhaust6->0 bar
Standardnominalflow ratepressuri-sation 6->5bar
Standardnominalflow rate1->2 (6-5)
Operatingpressure Description
Non-return valveHGL
G1/8,G1/4,G3/8,G1/2,M5,QS-4,QS-6,QS-8,QS-10,QS-12
130 ...1,600 l/min
0.5 ... 10bar
� Valve function: piloted non-returnfunction
� Pneumatically piloted� Screw-in with male thread� Pilot air connection: M5, G1/8, G1/4,G3/8, QS-4Internet: .../hgl
Manual overrideHAB
G1/8,G1/4,G3/8,G1/2
� Valve function: exhaust component� For non-return valve HGL� For manual exhausting of air trappedin a cylinderInternet: .../hab
Quick exhaustvalveVBQF
G1/8,QS-6
1,300 l/min 350 l/min 0.5 ... 10bar
� Minimal height� High flow rate� Improved noise emissions� Rotatable (but continuous rotatabilityof the connection should be avoided)Internet: .../vbqf
Quick exhaustvalveSE, SEU
G1/8,G1/4,G3/8,G1/2,G3/4
1,000 ...6,500 l/min
300 ...4,560 l/min
0.2 ... 10bar
� Valve function: Quick exhaust� Non-return valve, piloted� Screw-in� With or without silencerInternet: .../se
Ball valves and on-off valves
Type Valve functionPneumaticconnection 1
Standard nominalflow rate Operating pressure Description
On-off valveHE
2/2-way, doublesolenoid,3/2-way, doublesolenoid
QS-6,QS-8,QS-10,QS-12,R1/8,R1/4,R3/8,R1/2
270 ... 840 l/min -0.95 ... 10 bar � Non-return valve, piloted� Connection: thread at both ends,push-in connector at both ends,thread/push-in connectorInternet: .../he
Hand slide valveW
3/2-way, doublesolenoid
G1/8,G1/4,G3/8,G1/2,G3/4,M5
120 ... 6,800 l/min -0.95 ... 10 bar � Shut-off valve, manually actuated� In-line installation� Suitable for vacuum operation� Metal designInternet: .../w-3
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 71
88
Valves >
Ball valves and on-off valves
Type Valve functionPneumaticconnection 1
Standard nominalflow rate Operating pressure Description
Ball valveQH, QHS
2/2-way, doublesolenoid
G1/4,G3/8,G1/2,G3/4,G1,G1 1/2,QS-4,QS-6,R1/8
148 ... 84,000 l/min -1 ... 10 bar � Shut-off valve, manually actuated� In-line installation, can be screwed in,bulkhead fitting
� Variants: thread at both ends,push-in connector at both ends,thread/push-in connectorInternet: .../qh
Pressure regulators
Type
Pressureregulationrange
Standardnominalflow rate
Nominalflow rate,closed
Nominalflow rate,open
Pneumaticconnection1
Pneumaticconnection2 Description
PressureregulatorLR-QS, LRMA-QS
1 ... 8 bar 22 ... 150l/min
G1/8,G1/4,M5,QS-4,QS-6,QS-8
QS-4,QS-6,QS-8
� Piston regulator with through pressuresupply
� Available with pressure gauge� Directly actuated� Connections: push-in connector atboth ends, thread/push-in connector
� Push-in connector, can be rotated360°Internet: .../lrma
DifferentialpressureregulatorLRL, LRLL
2 ... 6 bar 30 ... 730l/min
30 ... 760l/min
G1/8,G1/4,G3/8,G1/2,M5
QS-4,QS-6,QS-8,QS-10,QS-12
� Piston regulator with through pressuresupply
� Without pressure gauge� Connections: thread/push-inconnector on top or at side
� Push-in connector, can be rotated360°Internet: .../lrll
72 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
88
Valves >
One-way flow control valves
Type Valve functionPneumaticconnection 1
Standard nominalflow rate in flowcontrol direction
Adjustmentcomponent Description
One-way flowcontrol valveGRLA, GRLZ,GRLSA, GRGA,GRGZ, GR, GRA,GRE, GRU, GRF,GRP
Exhaust air one-wayflow controlfunction,One-way flowcontrol function,Supply air one-wayflow controlfunction
G1/8,G1/4,G3/8,G1/2,G3/4,M3,M5,PK-3,PK-3 with union nut,PK-4,PK-4 with union nut,PK-6 with union nut,QS-3,QS-4,QS-6,QS-8,QS-10,QS-12
0 ... 4,320 l/min Rotary knob withscale,Internal hex,Knurled screw,Slotted head screw
� Flow control valve, flow control at oneend
� Exhaust air or supply air flow control� Standard, mini, in-line variants withdifferent flow rates
� Functional combination with one-wayflow control valve and pilotednon-return valve
� Flow control/silencer� Polymer, metal, stainless steel design� Connections: thread at both ends,push-in connector at both ends,thread/push-in connectorInternet: .../grla
One-way flowcontrol valveGRXA-HG
One-way flowcontrol functionfor exhaust air andpiloted non-returnvalve
QS-4,QS-6,QS-8
130 ... 280 l/min Slotted head screw � Functional combination with one-wayflow control valve and pilotednon-return valve
� Holding function and speed setting inone housing
� Additional supply port for holdingcrossover interlinkingInternet: .../grxa-hg
One-way flowcontrol valveVFOC
Supply air one-wayflow controlfunction
QS-4,QS-6
0 ... 270 l/min Slotted head screw � Shut-off valve, flow control at one end� Polymer, metal design� Precision adjustment for low andmedium speeds
� Thread/push-in connector, push-inconnector/push-in sleeveInternet: .../vfov
Flow control valves
Type Valve functionPneumaticconnection 1
Standard nominalflow rate in flowcontrol direction
Adjustmentcomponent Description
Flow controlvalveGRLO, GRGO,GRO, GRPO
Flow controlfunction
G1/8,G1/4,M3,M5,PK-3,PK-4,QS-3,QS-4,QS-6
1.65 ... 350 l/min Rotary knob withscale,Knurled screw,Slotted head screw
� Flow control valve, flow control at bothends
� Standard, mini, in-line flow controlvalve
� Polymer, metal design� Precision adjustment for low andmedium speeds
� Connections: thread at both ends,push-in connector at both ends,thread/push-in connectorInternet: .../grlo
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 73
88
Valves >
Proportional valves
Type Valve functionPneumaticconnection 1
Pressure regulationrange
Standard nominalflow rate Description
ProportionalpressureregulatorVPPM
3-way proportionalpressure regulator
Connecting plate,G1/4,G1/8,NPT1/4-18
0.02 ... 10 bar 380 ... 2,750 l/min � In-line valve� Sub-base valve, flanged valve� Piloted diaphragm regulator� Integration in valve terminal MPA viafieldbus
� Multi-sensor control� High repetition accuracy� User interface with LED displays, LCDdisplay, adjustment/selection buttons
� Setpoint value input as analoguevoltage or current signal
� Integrated pressure sensor� Electrical connection via plug, rounddesign, 8-pin, M12 or terminal linkingInternet: .../vppm
ProportionalpressureregulatorVPPE
3-way proportionalpressure regulator,3-way proportionalpressure regulator,closed
G1/8 0.02 ... 10 bar 310 ... 1,250 l/min � Piloted diaphragm regulator� Setpoint input as analogue voltagesignal
� Electrical connection via M12x1 plug,4-pin
� Available with setpoint moduleInternet: .../vppe
ProportionalpressureregulatorMPPE
3-way proportionalpressure regulator,closed
G1/8,G1/4,G1/2
0 ... 10 bar � Piloted diaphragm regulator� Setpoint value input as analoguevoltage or current signal
� Pressure regulation ranges can beselected
� Electrical connection via plug, rounddesign to DIN 45326, M16 x 0.75,8-pin
� Available with setpoint module� See product documentation on ourwebsite for standard nominal flow rateInternet: .../mppe
ProportionalpressureregulatorMPPES
3-way proportionalpressure regulator,closed
G1/8,G1/4,G1/2
0 ... 10 bar � Piloted diaphragm regulator� Setpoint value input as analoguevoltage or current signal
� Pressure regulation ranges canbe selected, individual pressureregulation ranges on request
� Electrical connection via plug, rounddesign to DIN 45326, M16 x 0.75,8-pin
� Available with setpoint module� See product documentation on ourwebsite for standard nominal flow rateInternet: .../mppes
Proportionaldirectionalcontrol valveMPYE
5/3,Closed
G1/8,G1/4,G3/8,M5
100 ... 2,000 l/min � Regulated piston spool valve� Analogue actuation� Setpoint input as voltage signal (0 ...10 V)
� Suitable for servopneumaticapplications with SPC200 and SPC11Internet: .../mpye
74 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
88
Valves >
Process/media valves
Type DesignValvefunction
Standardnominalflow rate Flow rate Kv
Processvalveconnection
Actuationtype Description
Ball valveVAPB
2-way ballvalve
5.9 ... 1,414m3/h
NPT1/4,NPT3/8,NPT1/2,NPT3/4,NPT1,NPT1 1/4,NPT1 1/2,NPT2,NPT2 1/2,NPT3,NPT4,Rp1/4,Rp3/8,Rp1,Rp1 1/4,Rp1 1/2,Rp1/2,Rp3/4,Rp2,Rp2 1/2,Rp3,Rp4
Mechanical � 2-way on-off valve� Brass design� Mechanically actuated� Manual actuation via accessories� Connecting thread to DIN 2999� Mounting flange to ISO 5211� Centring attachment for simpleautomationInternet: .../vapb
Ball valveVZBA
3-way ballvalve,L-hole,T-hole
4.5 ... 100m3/h
Rp1/4,Rp3/8,Rp1/2,Rp3/4,Rp1,Rp1 1/2,Rp1 1/4,Rp2
Mechanical � 3-way on-off valve� Stainless steel design� Mechanically actuated� Manual actuation via accessories� Connecting thread to DIN 2999� Mounting flange to ISO 5211� Centring attachment for simpleautomationInternet: .../vzba
Ball valveVZPR
2-way ballvalve,Semi-rotarydrive
2/2 Rp1/4,Rp3/8,Rp1/2,Rp3/4,Rp1,Rp1 1/4,Rp1 1/2,Rp2,Rp2 1/2,Rp3,Rp4
Electric,Pneumatic
� Pneumatic semi-rotary drive,double-acting and 2-way on-off valve
� Flow is fully opened or closed in bothdirections
� Brass or stainless steel design� Port pattern as per NAMUR to VDE/VDI3845Internet: .../vzpr
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 75
88
Valves >
Electrical directional control valves
Type DesignValvefunction
Standardnominalflow rate Flow rate Kv
Processvalveconnection
Actuationtype Description
Solenoid valveMN1H-2
Diaphragmvalve
2/2,Singlesolenoid
2,000 ...30,500l/min
G1/4,G3/8,G1/2,G3/4,G1,G1 1/2
Electric � Poppet valve� Brass design� Adjustable closing cushioning� In-line mounting or via through-holes� Operating voltage 24 V DC, 110/230V AC (50 ... 60 Hz)
� Electrical connection via plug, squaredesign to EN 175301-803, type AInternet: .../mn1h-2
Solenoid valveVZWM
Poppetvalve withdiaphragmseal
2/2-way,singlesolenoid,closed
1,400 ...31,000l/min
1.6 ... 39m3/h
G1/4,G3/8,G1/2,G3/4,G1,G1 1/4,G1 1/2,G2
Electric � Diaphragm valve� Indirectly actuated� Brass or special steel casting design� Wide range of coils� Electrical connection via solenoidarmature tube system 8 or 13
� Voltage 24 V DC, 110, 230 V ACInternet: .../vzwm-l
Angle seat valves
Type DesignValvefunction
Standardnominalflow rate Flow rate Kv
Processvalveconnection
Actuationtype Description
Angle seat valveVZXF
Poppetvalve withspringreturn
2/2-way,singlesolenoid,closed
3,000 ...50,700l/min
2.8 ... 47.5m3/h
G1/2,G3/4,G1,G1 1/4,G1 1/2,G2,NPT1/2,NPT3/4,NPT1,NPT1 1/4,NPT1 1/2,NPT2
Pneumatic � Insensitive to steam or slightlycontaminated media
� No pressure differential requiredbetween the inlet and outlet
� Low flow resistance� No dead space� Long service life� Low-maintenanceInternet: .../vzxf
Pneumatic directional control valves
Type DesignValvefunction
Standardnominalflow rate Flow rate Kv
Processvalveconnection
Actuationtype Description
Pneumatic valveVLX
Diaphragmvalve
2/2,Singlesolenoid
2,400 ...14,000l/min
G1/4,G3/8,G1/2,G3/4,G2
Pneumatic � Poppet valve� Indirectly actuated� Brass design� In-line mounting or via through-holesInternet: .../vlx
76 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
88
Valves >
M5 Compact System
Type Description
M5 CompactSystemMUFH, MFH,JMFH, VL/O, J,VL, JD, VZ, VZO,OS, ZK, GRF, PE,VPE, PEN, PZA,PZV, PZVT
� Complete system offering controlcomponents with all the functionsrequired for pneumatic sequencecontrols
� Solenoid and pneumatic valves� Time delay valves� Logic components� One-way flow control valves� Pressure switches� Pneumatic counters� Pneumatic timers� For control cabinet installation� Fast replacement of componentsInternet: .../m5-compact
Quickstepperand CommanderFSS, FSSC
� Quickstepper: pneumatic-mechanicalsequencer with 12 stepsand start logic circuits;ready-to-install sequence controller;acknowledgement-controlled motionsequences
� Commander: command module foruse with Quickstepper, includingthe most important functions forpneumatic sequencersInternet: .../fss
Control block fortwo-hand startZSB
� Standard nominal flow rate >50 l/min� Nominal size: 4 mm� Pneumatic connection: G1/8� Safety component in accordance withEU Machinery Directive
� Poppet valve� Mounting thread or through-holes inhousingInternet: .../zsb
CounterPZA, PZV
� Mechanical counter with pneumaticdrive
� Through-holes in housing or frontpanel mounting
� Reset via pushbutton or pneumaticsignal
� Available with protective capInternet: .../pza
TimerPZVT
� Mechanical sequence counter withpneumatic drive
� Adjustable delay time� Front panel mounting� Mounting on G or H rails� Available with protective capInternet: .../pzvt
OR gateOS
� Valve function: OR function� Logic valve� Pneumatic control system� Mounting via through-holesInternet: .../os
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 77
88
Valves >
M5 Compact System
Type Description
Logic componentZK
� Valve function: AND function� Dual-pressure valve� Connects two input signals in the ANDoperation
� Mounting via through-holesInternet: .../zk
Time delay valveVZA, VZOA, VZB,VZOB
� Time delay infinitely adjustable� Max. 30 s time delay� Mounting via through-hole or frontpanel mountingInternet: .../vza
Customised components � for your specific requirementsValves with customiseddesignsCan�t find the valve youneed in our catalogue?We can offer you customisedcomponents that aretailored to your specificrequirements � from minorproduct modifications tocomplete new productdevelopments.
Common product modifications:� Coatings for special ambient conditions� Customised cables: length, pinallocation, pre-assembled with plug
� Modified actuating elements� Modified connecting thread� Modified valve sub-basesMany additional variants are possible. Askyour Festo sales engineer, who will be happyto help.Further information on customisedcomponents can be found on your localwebsite at www.festo.com
78 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
88
Valve terminals >
Software toolValve terminal selection Compile a product with numerous features
reliably and quickly with the help of theconfigurator.Select all the required product featuresstep-by-step. The use of logic checksensures that only correct configurations areavailable for selection.The configurator is part of the electroniccatalogue and is not available as a separatesoftware program.
Standards-based valve terminals
Type Width
Standardnominal flowrate
Max. no. ofvalve positions
Electricalcontrol
Valve terminaldesign Description
Valve terminaltype 16VTIA
18 mm,26 mm
400 ... 1,000l/min
16 Individualconnection
Modular andexpandable
� Robust and flexible valve terminal toISO 15407-1
� Two valve sizes can be combined� Wide range of individual electricalconnectionsInternet: .../vtia
Valve terminaltype 44, type 45VTSA, VTSA-F
18 mm,26 mm,42 mm,52 mm,65 mm
400 ... 4,000l/min
32 Ethernet,Fieldbus,Multi-pin plug,Integratedcontroller
Modular andexpandable
� Robust and flexible valve terminal toISO 15407-2/ISO 5599-2
� Four valve sizes can be combined� Integrated safety functionsInternet: .../vtsa
Universal valve terminals
Type Width
Standardnominal flowrate
Max. no. ofvalve positions
Electricalcontrol
Valve terminaldesign Description
Valve terminaltype 32MPA-S
10 mm,20 mm
0 ... 700 l/min 64 Fieldbus Modular andexpandable
� Compact dimensions� Two valve sizes can be combined� Strong communication options thanksto serial linkingInternet: .../mpa
Valve terminaltype 34MPAL
10 mm,20 mm
0 ... 700 l/min 64 Fieldbus Modular andexpandable
� Highly modular and versatile� Easily expandable in increments ofone
� Plastic sub-basesInternet: .../mpal
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 79
99
Valve terminals >
Universal valve terminals
Type Width
Standardnominal flowrate
Max. no. ofvalve positions
Electricalcontrol
Valve terminaldesign Description
Valve terminaltype 33MPAF
10 mm,20 mm
0 ... 700 l/min 64 Fieldbus Modular andexpandable
� Optimised for high flow rates� Two valve sizes can be combined� Strong communication options thanksto serial linkingInternet: .../mpaf
Valve terminaltype 10CPV
10 mm,14 mm,18 mm
0 ... 1,600l/min
8 AS-interface,CP installationsystem,Individualconnection,Fieldbus,Multi-pin plug
Fixed grid � Cubic design: Maximum performancein the minimum of space
� Three sizes� Wide range of connection andmounting optionsInternet: .../cpv
Valve terminaltype 12CPA
10 mm,14 mm
300 ... 600l/min
22 AS-interface,Individualconnection,Fieldbus,Multi-pin plug
Modular andexpandable
� Compact Performance: compactvalves in sturdy metal housing
� Patented electrical linking system forflexible expansion options
� Electrical connection technology:individual, multi-pin plug,AS-interface, fieldbus, CPX terminalconnection
� High pressure range� Wide range of valve functions� Multiple pressure zonesInternet: .../cpa
Valve terminaltype 80, SmartCubicCPV-SC
10 mm 170 l/min 16 Individualconnection,Fieldbus,Multi-pin plug
Fixed grid � Compact format� Optimised flow rates� Clear designInternet: .../cpv-sc
Valve terminaltype 82, SmartCubicCPA-SC
10 mm 120 ... 180l/min
20,24
Individualconnection,Fieldbus,Multi-pin plug
Fixed grid � Compact dimensions� Wide range of individual electricalconnections
� Various pneumatic connectiondirectionsInternet: .../cpa-sc
Valve terminaltype 24VTUB
20 mm 200 ... 1,000l/min
16 Individualconnection,Multi-pin plug
Fixed grid � Outstanding economy� Simple handling� Optimised for basic applicationsInternet: .../vtub
Valve terminaltype 23VTUB-12
12 mm 400 l/min 35 Fieldbus,Multi-pin plug
Fixed grid � Compact dimensions� Sturdy poppet valve� Flexible and low-cost fieldbusmodulesInternet: .../vtub-12
80 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
99
Valve terminals >
Application-specific valve terminals
Type Width
Standardnominal flowrate
Max. no. ofvalve positions
Electricalcontrol
Valve terminaldesign Description
Valve terminalMH1
10 mm 10 l/min 24 Individualconnection,Multi-pin plug
Fixed grid � Extremely small valves� Low switching noise� Versatile pneumatic connectionsInternet: .../mh1
Valve terminaltype 15, CleanDesignCDVI
24 mm 300 ... 650l/min
16 Fieldbus,Multi-pin plug
Modular andexpandable
� Hygienic� Corrosion-resistant� Easy to clean (Clean Design)Internet: .../cdvi
Valve terminaltype 84VTOC
10 mm 10 l/min 24 Multi-pin plug Fixed grid � Compact pilot valves for processvalves
� Various electrical and pneumaticinterfaces
� Basis for customised adaptationsInternet: .../vtoc
Electrical peripherals
TypeMax. number ofinputs
Max. number ofoutputs
Number of modulepositions Electrical control Description
ElectricalterminalCPX
Digital 512,analogue 32
Digital 512,analogue 18
Max. 9 electricinput/outputmodules
Fieldbus,Integratedcontroller
� Centralised, decentralised, hybridinstallation system with maximummodularity and flexibility
� IP65 and IP67 or IP20� Choice of plastic or metal housingwith individual linking
� Open to common fieldbus protocolsand Ethernet
� Integrated diagnostic and servicefunction
� Operating modes: stand-alone asremote I/O or with valve terminalstype 12 CPA, type 32 MPA, type 44/45VTSA/VTSA-FInternet: .../cpx
InstallationsystemCPI
128 128 Max. 4 installationstrings,Max. 4 CP modulesper string
Fieldbus,Integratedcontroller
� Complete concept for decentralisedmachine and system structure
� Combination of centralised anddecentralised installation possiblewith electrical terminal CPX
� Decentralised pneumatic componentsand sensors for fast processes
� Centralised electrical components forfieldbus and common power supply
� With valve terminal type 10 CPV, type12 CPA, type 32 MPA, type 80 CPV-SCInternet: .../ctec
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 81
99
Valve terminals >
Electrical peripherals
TypeMax. number ofinputs
Max. number ofoutputs
Number of modulepositions Electrical control Description
AS-interface®componentsASI
496 496 AS-interface � Accessories for AS-interfaceinstallation system
� Modules for actuation of individualvalves ASI-EVA
� Cable distributor ASI-KVT� Addressing device ASI-PRG-ADR� Compact I/O modules (IP65, IP67)� AS-interface power supply unit SVG..Internet: .../as-interface
Control blocks
Type Description
Control blockCPX-FEC
� Modular I/O system, up to 512 I/Os �full flexibility via CPX
� Comprehensive solutions fordiagnostics and condition monitoring
� Stand-alone open and closed-loopcontrol
� Pre-processing with all commonfieldbus/Ethernet protocols (remotecontrol) � fast, stand-alone processeson siteInternet: .../cpx-fec
Control blockCPX-CEC-C1
� Modular I/O system, up to 512I/Os, CAN master functionality � fullflexibility via CPX
� Comprehensive solutions fordiagnostics and condition monitoring� thanks to special CoDeSys functionlibrary
� Stand-alone open and closed-loopcontrol
� Pre-processing with all commonfieldbus/Ethernet protocols (remotecontrol) � fast, stand-alone processeson siteInternet: .../cpx-cec-c1
Bus nodeCTEU
� For valve terminals type 23 VTUB-12and type 24 VTUB
� Available for CANopen, Profibus,DeviceNet
� Fieldbus-typical LEDs, interfaces andswitch elements available
� Isolated power supply for electronicsand valves
� Optional basic diagnosis:undervoltage, short circuit
� Optionally expandable for low-cost,decentralised installation of twoadditional valve terminals with I-PortInternet: .../cteu
82 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
99
Valve terminals >
Customised components � for your specific requirementsValve terminals withcustomised designsCan�t find the valve terminalyou need in our catalogue?We can offer you customisedcomponents that aretailored to your specificrequirements � from minorproduct modifications tocomplete new productdevelopments.
Common product modifications:� Coatings for special ambient conditions� Customised cables: length, pinallocation, pre-assembled with plug
� Modified actuating elements� Modified connecting thread� Modified valve sub-basesMany additional variants are possible. Askyour Festo sales engineer, who will be happyto help.Further information on customisedcomponents can be found on your localwebsite at www.festo.com
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 83
99
Sensors >
Software toolConfigurator Compile a product with numerous features
reliably and quickly with the help of theconfigurator.Select all the required product featuresstep-by-step. The use of logic checksensures that only correct configurations areavailable for selection.The configurator is part of the electroniccatalogue and is not available as a separatesoftware program.
Proximity sensors, for T-slot
TypeElectricalconnection
Operating voltagerange DC
Switching elementfunction Switching output Description
Proximity sensorSME-8, SME-8M,SME-8-SL,SME-8-FM
2-wire,2-pin,3-wire,3-pin,Cable,Cable with plug,M12,M5x0.5,M8x1,Snap-on flange,Plug,Rotatable thread,Open end
0 ... 230 V N/O contact,N/C contact
Contacting,Contacting, bipolar,Without LEDfunction
� Method of measurement: magneticreed
� Screw-clamped or clamped in slot,insertable from above or lengthwisefrom end
� Electrical connection via open cableend, plug M5, M8, M12
� Cable length 0.3, 2.5, 5, 7.5, 0.2 ... 10m
� Two-wire and three-wire design� Suitable for use with energy chainsand robots
� SME-8-...-S6: Heat-resistant designInternet: .../sme-8
Proximity sensorSMT-8, SMT-8G,SMT-8M,SMT-8-SL,CRSMT-8
2-wire,2-pin,3-wire,3-pin,Cable,Cable with plug,M12,M12x1,M5x0.5,M8x1,Snap-on flange,Plug,Rotatable thread,Open end
5 ... 30 V Namur,N/O contact,N/C contact
NPN,Namur,PNP,PNP/NPN,Non-contacting,2-wire
� Method of measurement:magneto-resistive
� Secured with screw or clamped,insertable in the slot from above orlengthwise
� Electrical connection via open cableend, plug M5, M8, M12
� Cable length 0.3, 2.5, 5, 7.5, 0.2 ... 30m
� Two-wire and three-wire design� Selected types acc. to ATEX Directivefor explosive atmospheres
� CRSMT-8: Corrosion and acid-resistantdesign
� Suitable for use with energy chainsand robotsInternet: .../smt-8
84 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1010
Sensors >
Proximity sensors, for T-slot
TypeElectricalconnection
Operating voltagerange DC
Switching elementfunction Switching output Description
Proximity sensorSMEO-8E
2-wire,3-wire,3-pin,Cable,M12x1,M8x1,Plug
0 ... 250 V N/O contact Contacting,Contacting, bipolar,Without LEDfunction
� Sturdy sensor in block design� Method of measurement: magneticreed
� Electrical connection via open cableend, plug M8, M12
� Cable length 2.5 m� Plug integrated in housing� LED switching status displayInternet: .../smeo-8
Proximity sensorSMTO-8E,SMTSO-8E
3-wire,3-pin,Cable,M12x1,M8x1,Plug
10 ... 30 V N/O contact NPN,PNP
� Sturdy sensor in block design� Method of measurement:magneto-resistive
� Electrical connection via plug M8, M12� Plug integrated in housing� LED switching status display� SMTSO-8: Welding field immunedesignInternet: .../smto-8
Proximity sensorSMPO-8E
� Pneumatic proximity sensor� Method of measurement: magnetic� Pneumatic connection via femalethread M5
� Optical switching status displayInternet: .../smpo
Proximity sensors, for C-slot
TypeElectricalconnection
Operating voltagerange DC
Switching elementfunction Switching output Description
Proximity sensorSME-10,SME-10M,SME-10F
2-wire,2-pin,3-wire,3-pin,Cable,Cable with plug,M12,M5x0.5,M8x1,Snap-on flange,Plug,Rotatable thread,Open end
0 ... 230 V N/O contact,N/C contact
Contacting,Contacting, bipolar,Without LEDfunction
� Method of measurement: magneticreed
� Clamped in C-slot, insertable fromabove or from end
� Electrical connection via open cableend, plug M5, M8
� Cable length 0.3, 2.5 m� Two-wire and three-wire designInternet: .../sme-10
Proximity sensorSMT-10,SMT-10M,SMT-10F,SMT-10G
2-wire,2-pin,3-wire,3-pin,Cable,Cable with plug,M12,M12x1,M5x0.5,M8x1,Snap-on flange,Plug,Rotatable thread,Open end
5 ... 30 V Namur,N/O contact,N/C contact
NPN,Namur,PNP,PNP/NPN,Non-contacting,2-wire
� Method of measurement:magneto-resistive
� Clamped in C-slot, insertable fromabove or from end
� Cable length 0.3, 2.5 m� Electrical connection via open cableend, plug M5, M8
� Two-wire and three-wire designInternet: .../smt-10
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 85
1010
Sensors >
Proximity sensors, round design
TypeElectricalconnection
Operating voltagerange DC
Switching elementfunction Switching output Description
Proximity sensorSMEO-4U,CRSMEO-4
2-wire,3-wire,3-pin,Cable,M12x1,M8x1,Plug
0 ... 250 V N/O contact Contacting,Contacting, bipolar,Without LEDfunction
� Method of measurement: magneticreed
� Electrical connection via open cableend, plug M8
� Cable length 2.5, 5 m� Two-wire and three-wire design� CRSMEO-4: Corrosion-resistantdesignInternet: .../smeo-4
Proximity sensorSMTO-4U
3-wire,3-pin,Cable,M12x1,M8x1,Plug
10 ... 30 V N/O contact NPN,PNP
� Method of measurement:magneto-inductive
� Electrical connection via open cableend, plug M8
� Cable length 2.5 m� Three-wire designInternet: .../smto-4
Proximity sensors, block design
TypeElectricalconnection
Operating voltagerange DC
Switching elementfunction Switching output Description
Proximity sensorSMEO-1
2-wire,3-wire,3-pin,Cable,M12x1,M8x1,Plug
0 ... 250 V N/O contact Contacting,Contacting, bipolar,Without LEDfunction
� Method of measurement: magneticreed
� Electrical connection via open cableend, plug M8
� Cable length 2.5, 5 m� Two-wire and three-wire design� SMEO-1-S6: Heat-resistant design� LED switching status displayInternet: .../smeo-1
Proximity sensorSMTO-1,SMTSO-1
3-wire,3-pin,Cable,M12x1,M8x1,Plug
10 ... 30 V N/O contact NPN,PNP
� Method of measurement:magneto-resistive
� Cable length 2.5 m� Electrical connection via open cableend, plug M8, M12
� Three-wire design� SMTSO-1: Welding field immunedesign
� LED switching status displayInternet: .../smto-1
Proximity sensorSMTO-6
3-pin,M8x1,Plug
10 ... 30 V N/O contact PNP � Method of measurement:magneto-inductive
� Electrical connection via plug M12� LED switching status displayInternet: .../smto-6
86 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1010
Sensors >
Proximity sensors, block design
TypeElectricalconnection
Operating voltagerange DC
Switching elementfunction Switching output Description
Proximity sensorSMPO-1
� 3/2-way valve, normally closed� Pneumatic proximity sensor� Method of measurement: magnetic� Pneumatic connection via barbedfitting for tubing I.D. 3 mm
� Optical switching status displayInternet: .../smpo
Proximity sensorSMT-C1
3-wire,3-pin,Cable,Cable with plug,M12x1,M8x1,Rotatable thread
10... 30 V N/O contact PNP � Method of measurement: inductive� Electrical connection via open cableend
� Three-wire design� LED switching status displayInternet: .../smt-c1
Position sensors
Type DesignPosition measuringrange Analogue output
Electricalconnection Description
PositiontransmitterSMAT-8E,SMAT-8M
For T-slot 0 ... 52 mm 0 � 10 V,0 � 20 mA
4-pin,Cable with plug,M8x1,Plug,Rotatable thread
� Method of measurement: magnetic� Screw-clamped or clamped in slot,insertable from above or lengthwisefrom end
� Integrated out-of-range sensor� LED status displayInternet: .../smat
Position sensorSMH-S1
For gripper 4-pin,Cable with plug,M8x1
� Method of measurement: magneticHall
� For grippers� Freely selectable switching points� Three gripper positions can bedetected using an evaluation unitInternet: .../smh
Signal converters
Type Signal rangeSwitchingoutput
Switchingfunction
Electricalconnection,output
Electricalconnection,input Description
Signal converterSVE4
0 � 10 V +/-0.3V,0 � 20 mA+/-0.6 mA,Adaptedfor positionsensorsSMH-S1-HG
2xNPN,2xPNP
Freelyprogrammable
4-pin,M8x1,Plug,To EN 60947-5-2
4-pin,Socket,M8x1,To EN 60947-5-2
� Converts analogue signals intoswitching points
� Switching function freelyprogrammable with teach-in
� Threshold value, hysteresis or windowcomparator
� Mounting directly on H-rail or viaadapter plate
� LED switching status display� Certification: cULus listed (OL), C-TickInternet: .../sve4
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 87
1010
Sensors >
Signal converters
Type Signal rangeSwitchingoutput
Switchingfunction
Electricalconnection,output
Electricalconnection,input Description
Evaluation unitSMH-AE
NPN,PNP
5-pin,,Plug,M12x1
4-pin,Socket,M8x1, to EN60947-5-2
� Electronic evaluation unit for Hallsensor SMH-S1
� Amplifies the signal from the sensor� With 3 potentiometers for setting 3switching points
� LED operating and switching statusdisplayInternet: .../smh-ae
Pressure and vacuum sensors
Type
Pressuremeasuringrange
Switchingelementfunction
Pneumaticconnection
Electricalconnection Display type Description
Pressure andvacuum switchPEV, VPEV
-1 ... 10 bar Changeoverswitch
G1/4,G1/8,M5
4-pin,Type A,M12x1,M8x1,Screwterminal,Plug,To DIN 43650,To EN 60947-5-2,Round design,Square design
� Mechanical pressure and vacuumswitch
� Adjustable switching point� Screw-in, via through-holes or viaH-rail
� Visual scale for pressure adjustment� Certification: CCCInternet: .../pev
PE converterPEN, PE, VPE
-1 ... 8 bar N/O contact,Changeoverswitch
G1/8,M5,PK-3,PK-4
3 connectingwires,3-wire,4-wire,Cable,Screw terminal
� Pneumatic/electric differentialpressure switch
� Pneumatic/electric pressuretransducer
� Design for vacuum� Mounting on mounting frame 2N� Splash-proof design� Certification: CCCInternet: .../pen
Pressure sensorSDE5
-1 ... 10 bar N/O contact,Switchable,N/C contact
QS-1/4,QS-4,QS-5/32,QS-6
3-wire,3-pin,Cable,M8x1,Plug,To EN 60947-5-2,Round design
� Programmable and configurablepressure switch for simple pressuresensing tasks
� Trigger/window comparator� Teach-in function for programming� Integrated microprocessor� Switching status indicated by an LEDvisible from all sides
� Certification: cULus listed (OL), C-TickInternet: .../sde5
88 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1010
Sensors >
Pressure and vacuum sensors
Type
Pressuremeasuringrange
Switchingelementfunction
Pneumaticconnection
Electricalconnection Display type Description
Pressure sensorSDE3
-1 ... 10 bar Switchable QS-4,QS-5/32
4-pin,5-pin,Cable,Cable withplug,M12x1,M8x1,Plug,To EN 60947-5-2,Round design
IlluminatedLCD
� Five pressure measuring ranges� Measurement of relative or differentialpressure or 2 independent pressureinputs
� Switching output 2x PNP or 2x NPN� Numerical and graphical pressuredisplay
� Via H-rail, via wall/surfacebracket, front panel mounting,via through-holes
� Certification: C-Tick, Atex, c UL us -Listed (OL)Internet: .../sde3
Pressure sensorSDE1
-1 ... 10 bar Switchable G1/8,QS-4,R1/4,R1/8
3-pin,4-pin,5-pin,Cable withplug,M12x1,M8x1,Plug,To EN 60947-5-2,Round design
IlluminatedLCD,BackilluminatedLCD
� Five pressure measuring ranges� Measurement of relative or differentialpressure
� Switching outputs PNP, NPN and withanalogue current or voltage output
� LCD or illuminated LCD display� Via H-rail, via wall/surface bracket,mounting on service unit, front panelmounting
� Certification: cULus listed (OL), C-TickInternet: .../sde1
Pressure sensorSPAB
-1 ... 10 bar Switchable Male threadG1/8,Male threadNPT1/8-27,Male threadR1/8,Female threadM5
4-wire,4-pin,Cable,M8x1,Plug,To EN 60947-5-2,Round design
IlluminatedLCD, multi-colour
� Relative pressure measurement� Switching output PNP, NPN andanalogue output
� Two-part, multi-coloured display� Simple commissioning thanks tointuitive operation
� Compact design 30x30 mm� Certification: cULus listed (OL), C-TickInternet: .../spab
Pressure sensorSDET
-1 ... 100 bar G1/4 4-pin,M12x1,Plug,To EN 60947-5-2,Round design
� Eight pressure measuring ranges� Analogue output 0.1 ... 10 V or 4 ...20 mA
� Relative pressure measurement� Resistant to water and oils� Pressure monitoring of gaseous andliquid media
� Pipe clamp included in scope ofdeliveryInternet: .../sdet
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 89
1010
Sensors >
Flow sensors
Type
Flowmeasuringrange
Operatingmedium
Operatingpressure
Pneumaticconnection
Electricalconnection Description
Flow sensorSFE3
0.05 ... 50l/min
G5: Nitrogen,L83: air qualityclass 3:6:2 toDIN ISO 8573-1
-0.7 ... 7 bar Female threadG1/8,QS-6
Cable � Flow sensor with integrated digitaldisplay
� With unidirectional flow input� Mounting: via through-holes ormounting bracket
� Electrical connection via open cableend
� Cable length 1 m� Certification: C-TickInternet: .../sfe3
Flow sensorSFET
-10 ... 50 l/min G5: Nitrogen,L83: air qualityclass 3:6:2 toDIN ISO 8573-1
-0.9 ... 7 bar Female threadG1/8,QS-4,QS-6
Cable � With unidirectional (SFET-F) orbidirectional (SFET-R) flow input
� Mounting: via through-holes ormounting bracket
� Electrical connection via open cableend
� Cable length 1, 3 m� Certification: C-TickInternet: .../sfet
Flow sensorSFAB
0.1 ... 1,000l/min
G5: Nitrogen,L78: air qualityclass 3:4:1to DIN ISO8573-1,L81: air qualityclass 5:4:3 toDIN ISO 8573-1
0 ... 10 bar QS-1/4,QS-10,QS-12,QS-3/8,QS-5/16,QS-6,QS-8
5-pin,M12x1,Straight plug
� Flow sensor with integrated digitaldisplay
� With unidirectional flow input� Mounting: H-rail mounting, wall orsurface mounting
� Certification: C-TickInternet: .../sfab
Flow sensorSFAM
10 ... 15,000l/min
G5: Nitrogen,L81: air qualityclass 5:4:3 toDIN ISO 8573-1
0 ... 16 bar Manifoldmodule,G1,G1 1/2,G1/2,NPT1 1/2-111/2,NPT1-11 1/2,NPT1/2-14
5-pin,M12x1,Straight plug
� Stand-alone device or combined withMS series service units
� Supplies absolute flow informationand accumulated air consumptionmeasurement
� Covers large measuring range withspecified precision thanks to highlydynamic response
� Large, illuminated LCD displayInternet: .../sfam
90 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1010
Sensors >
Inductive sensors
Type SizeSwitchingoutput
Switchingelementfunction
Electricalconnection
Operatingvoltage rangeDC Description
Proximity sensorSIEN
4 mm,6.5 mm,M12,M12x1,M18,M18x1,M30,M30x1.5,M5x 0.5,M8x1
NPN,PNP
N/O contact,N/C contact
3-wire,3-pin,Cable,M12x1,M8x1,Plug
10 ... 30 V � With standard switching distance� For DC voltage� Round design� Metric thread� Flush or non-flush mounting� With switching status display� Design with metal housing� Design with polyamide housingInternet: .../sien
Proximity sensorSIED
M12,M18,M30
Non-contacting,2-wire
N/O contact,N/C contact
2-wire,2-pin,Cable,M12x1,Plug
10 ... 320 V � With standard switching distance� For DC and AC voltage� Metric thread� Flush or non-flush mounting� With switching status display� Design with metal or polyamidehousingInternet: .../sied
Proximity sensorSIES
12x26x40 mm,15x20x30 mm,40x40x120mm,5x5x25 mm,8x8x40 mm
NPN,PNP
Antivalent,N/O contact,N/C contact
3-wire,3-pin,Cable,Cable withplug,M8x1,Screwterminal,Plug,Rotatablethread
10 ... 30 V � Block design� Flush mounting� With switching status displayInternet: .../sies
Proximity sensorSIEH
3 mm,M12,M18
NPN,PNP
N/O contact,N/C contact
3-wire,3-pin,Cable,Cable withplug,M12x1,M8x1,Plug
10 ... 30 V � With increased switching distance� Flush mounting� Metric thread� With switching status display� Design with stainless steel housingInternet: .../sieh
Proximity sensorSIEA
M8,M12,M18,M30
3-pin,4-pin,M12x1,M8x1,Plug
15 ... 30 V � With analogue output� Flush mounting� Metric threadInternet: .../siea
Proximity sensorSIEF
40x40x65 mm,M8,M12,M18,M30
NPN,PNP
Antivalent,N/O contact
3-wire,3-pin,4-pin,Fixcon,Cable,M12x1,M8x1,Plug
10 ... 30 V � Reduction factor 1 for all metals� Welding field immune� Flush, partially flush or non-flushmounting
� With switching status display� Design with housing resistant towelding spatterInternet: .../sief
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 91
1010
Sensors >
Inductive sensors
Type SizeSwitchingoutput
Switchingelementfunction
Electricalconnection
Operatingvoltage rangeDC Description
Proximity sensorSIES-8M
T-slot NPN,PNP
N/O contact,N/C contact
3-wire,3-pin,Cable,Cable withplug,M8x1,Rotatablethread
10 ... 30 V � Suitable for position sensing forelectric axes EGC and grippers withT-slot
� With 2 LEDs for better visibility� Flush mountingInternet: .../sies-8m
Opto-electrical sensors
TypeMethod ofmeasurement Range Size Type of light
Switchingoutput Description
Opto-electronicsensorSOEG
Distancesensor,Through-beamsensor,Receiver,Fibre-opticunit,Retro-reflectivesensor,Diffuse sensor,Backgroundsuppressionsensor,Transmitter,For transparentobjects
0 ... 20,000mm
20x32x12 mm,30x30x15 mm,4 mm,50x50x17 mm,M12,M12x1,M18,M18x1,M5x0.5
Infrared,Red,Red polarised
NPN,PNP
� Variants: diffuse sensor standard,with cylindrical light beam or withbackground suppression, laserretro-reflective sensor also fortransparent objects, through-beamsensor, fibre-optic unit, distancesensor
� Round design, block design� Setting option: potentiometer,teach-in
� Electrical connection via open cableend or plugInternet: .../soeg
Opto-electronicsensorSOEL
Distancesensor,Retro-reflectivesensor,Diffuse sensor,Backgroundsuppressionsensor
0 ... 20,000mm
20x32x12 mm,50x50x17 mm
Laser,Red,Red polarised
NPN,PNP
� Laser sensor� Variants: diffuse sensor as contrastsensor also with backgroundsuppression, retro-reflective sensor,distance sensor
� Setting option: teach-in,potentiometer
� Electrical connection via open cableend or plugInternet: .../soel
Colour sensorSOEC
Colour sensor 12 ... 32 mm 50x50x17 mm White PNP � Diffuse sensor� Block design� Setting option: teach-in� Electrical connection via M12x1 plug,8-pin
� Display via 7 LEDsInternet: .../soec
92 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1010
Sensors >
Opto-electrical sensors
TypeMethod ofmeasurement Range Size Type of light
Switchingoutput Description
Fibre-optic cableSOE4, SOOC
Through-beamsensor,Fixed focus,Fork lightbarrier,Fibre-opticunit,Diffuse sensor
2 ... 650 mm Red NPN,PNP
� Use for precise and space-savingposition sensing in electronics andlight assembly
� Operational with accessory fibre-opticcable SOOC
� Variants: LED display, switching andanalogue output
� Setting option: teach-in� Four operating modes: standard, finemode, fast mode, long-distance mode
� H-rail mounting or via through-holes� With protection against mutualinterferenceInternet: .../soe4
Fork light barrierSOOF
Fork lightbarrier
Fork 120x60mm,Fork 30x35mm,Fork 50x55mm,Fork 80x55 mm
Red NPN,PNP
� Through-beam sensor with minimalinstallation effort
� Version: polymer or metal� Sturdy housing: high shock andvibration resistance
� Protection class IP67� Electrical connection via M8x1 plug,3-pin
� Setting option: potentiometer orteach-in
� LED displaysInternet: .../soof
Air gap sensors
Type Sensing range Operating pressure Display type Operating medium Description
Air gap sensorSOPA
20 ... 200 µm 4 ... 7 bar Illuminated LCD,multi-colour
LX3: filteredcompressed air,grade of filtration40 µm, lubricatedor unlubricated
� Convenient solution for high-precisioncontact and distance monitoring
� Setting option: teach-in or numericalsetting using three buttons
� Integrated air jet function� Multi-coloured LCD display� H-rail, wall mounting, viathrough-holes
� Certification: C-TickInternet: .../sopa
Sensor boxes
TypeMeasuredvariable
Operatingvoltage rangeAC
Operatingvoltage rangeDC
Electricalconnection
Type ofmounting Description
Sensor boxSRBP
Rotation angle 19.2 ... 28.8 V 7.8 ... 28.8 V 9-pin,Screwterminal,Plug-in
� Based on VDI/VDE 3845 (NAMUR)� Binary� Position sensor for semi-rotaryactuators
� Sensors based on reed technologyInternet: .../srbp
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 93
1010
Sensors >
Sensor boxes
TypeMeasuredvariable
Operatingvoltage rangeAC
Operatingvoltage rangeDC
Electricalconnection
Type ofmounting Description
Sensor boxSRAP
Rotation angle 15 ... 30 V 9-pin,Screwterminal,Plug-in
� Based on standard VDI/VDE 3845(NAMUR)
� Analogue� For monitoring the position ofsemi-rotary actuators
� Sensors based on 2D Hall technologyInternet: .../srap
Limit switchattachmentSRBF
0 ... 250 V 0 ... 24 V On flange toISO 5211,Via accessories
� Based on ISO 5211, DIN EN 60947-5-1� With two mechanical switches� For mechanical, electric proximitysensorInternet: .../srbf
Limit switchattachmentDAPZ
0 ... 250 V 0 ... 250 V Screwterminal,Plug-in
� Square or round design� Drive interface to Namur VDI/VDE3845
� With pneumatic, electric or inductivesensingInternet: .../dapz
94 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1010
Vision systems >
Function monitoring
Type Sensor resolution Working distance Field of vision Exposure time Description
Compact VisionSystemSBOC-M
1,280 x 1,024 pixels(SXGA),640 x 480 pixels(VGA),752 x 480 pixels(WideVGA)
Depends on thelens chosen
Depends on thelens chosen
8 ... 1,000,000 µs � High-speed camera for diagnosticsand commissioning as well as forfunction monitoring of fast motionsequences
� Recording and storage electronicsintegrated in the camera
� For standard lens with C mountconnection
� Can be networked via Ethernet� Compact dimensions, low weightInternet: .../sboc-m
Compact VisionSystemSBOI-M
640 x 480 pixels(VGA),752 x 480 pixels(WideVGA)
20 ... 1,000 mm 14 x 10 mm - 520 x390 mm,7.9 x 5.5 mm - 195x 125 mm
18 ... 1,000,000 µs � High-speed camera for diagnosticsand commissioning as well as forfunction monitoring of fast motionsequences
� Recording and storage electronicsintegrated in the camera
� With integrated lens� Can be networked via Ethernet� Compact dimensions, low weightInternet: .../sboi-m
Orientation and quality inspection
TypeSensorresolution
Max. no. ofinspectionprograms
Frame rate(full image)
Lensmounting
Min. partlength
Min. partdiameter Description
Compact VisionSystemSBOC-Q
1,280 x1,024 pixels(SXGA),640 x480 pixels(VGA),752 x480 pixels(WideVGA)
256 27 ... 185fps
CS mount(C mountwith lensprotectiontube)
� Intelligent field-based camera� For 2D quality inspection, position androtary orientation sensing, reading of1D and 2D codes, reading of opticalcharacters (OCR)
� Integrated full PLC (CoDeSys)� Ethernet and CAN for communicatingwith master controllersInternet: .../sboc-q
Compact VisionSystemSBOI-Q
640 x480 pixels(VGA),752 x480 pixels(WideVGA)
256 60 ... 185fps
Integratedlens
� Intelligent field-based camera� For 2D quality inspection, position androtary orientation sensing, reading of1D and 2D codes, reading of opticalcharacters (OCR)
� Integrated full PLC (CoDeSys)� Ethernet and CAN for communicatingwith master controllersInternet: .../sboi-q
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 95
1111
Vision systems >
Orientation and quality inspection
TypeSensorresolution
Max. no. ofinspectionprograms
Frame rate(full image)
Lensmounting
Min. partlength
Min. partdiameter Description
CheckboxCHB
1,024pixels/line,512pixels/line
48 3 mm 0.5 mm � Intelligent, line-scan camera-basedvision system
� For orientation recognition and qualityinspection of small moving parts
� Available with conveyor unit and airejector positions
� Available with encoder connection� Teach-in functionInternet: .../chb
CheckboxCompactCHB-C
1,024pixels/line,512pixels/line
48 3 mm 0.5 mm � Intelligent line-scan camera� For orientation recognition and qualityinspection of small moving parts
� Encoder connection� Teach-in functionInternet: .../chb-c
96 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1111
Compressed air preparation >
Software toolAir consumption Calculate your system�s air consumption
quickly and conveniently. Simply enterall the drives and tubing, set the cycletimes and working pressure and the airconsumption per minute and per day will becalculated for you. It includes a feature forexporting the input table together with theresult directly to Excel.This tool can be found on the website underSupport in the Engineering software area asa download or on the DVD under Selectionand sizing.
Configurator Compile a product with numerous featuresreliably and quickly with the help of theconfigurator.Select all the required product featuresstep-by-step. The use of logic checksensures that only correct configurations areavailable for selection.A dynamic graphic generated on the basis ofthe configuration provides visual assistancein selecting the correct product features.The configurator is part of the electroniccatalogue and is not available as a separatesoftware program.
Service units: D series, metal
TypePneumaticconnection 1
Standardnominal flowrate
Pressureregulationrange
Operatingpressure
Grade offiltration Description
Service unitFRC, FRCS
G1/8,G1/4,G3/8,G1/2,G3/4,G1,M5,M7,QS-4,QS-6
80 ... 8,700l/min
0.5 ... 12 bar 5 ... 40 µm � Filter, regulator and lubricatorfunctions in a single unit
� High flow rate and highly efficientremoval of contaminants
� Good regulation characteristics withminimal pressure hysteresis
� Setting values are secured by lockingthe rotary knob
� Sizes: Micro, Mini, Midi, Maxi� Grid dimensions: 25, 40, 55, 66 mmInternet: .../frc
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 97
1212
Compressed air preparation >
Service units: D series, metal
TypePneumaticconnection 1
Standardnominal flowrate
Pressureregulationrange
Operatingpressure
Grade offiltration Description
Service unitcombinationFRC-K
G1/8,G1/4,G3/8,G1/2,G3/4
530 ... 8,200l/min
0.5 ... 12 bar 40 µm � Combination of filter regulator LFR,branching module FRM, lubricatorLOE, on-off valve HE, HEE, soft-startvalve HEL, mounting accessories
� Sizes: Micro, Mini, Midi, MaxiInternet: .../frc-*ka
Service unitcombinationLFR-K, LFRS-K
G1/8,G1/4,G3/8,G1/2,G3/4
575 ... 9,400l/min
0.5 ... 12 bar 40 µm � Combination of filter regulator LFR,LFRS, branching module FRM, on-offvalve HE, HEE, soft-start valve HEL,mounting accessories
� Sizes: Micro, Mini, Midi, MaxiInternet: .../lfr-*ka
Service units: D series, polymer
TypePneumaticconnection 1
Standardnominal flowrate
Pressureregulationrange
Operatingpressure
Grade offiltration Description
Service unitFRC-DB
G1/8,G1/4
400 ... 650l/min
0.5 ... 7 bar 5 ... 40 µm � Filter, regulator and lubricatorfunctions in a single unit
� High flow rate and highly efficientremoval of contaminants
� Good regulation characteristics withminimal pressure hysteresis
� Setting values are secured by meansof the rotary knob with detent
� With manual or semi-automaticcondensate drain
� Size: MiniInternet: .../frc
Service units: MS series
TypePneumaticconnection 1
Standardnominal flowrate
Pressureregulationrange
Operatingpressure
Grade offiltration Description
Service unitMSB4-FRC,MSB6-FRC
G1/8,G1/4,G3/8,G1/2
800 ... 4,800l/min
0.3 ... 12 bar 5 ... 40 µm � Sizes: 4, 6� Filter, regulator and lubricatorfunctions in a single unit
� High flow rate and highly efficientremoval of contaminants
� Good regulation characteristics withminimal pressure hysteresis
� Setting values are secured by lockingthe rotary knobInternet: .../msb
98 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1212
Compressed air preparation >
Service units: MS series
TypePneumaticconnection 1
Standardnominal flowrate
Pressureregulationrange
Operatingpressure
Grade offiltration Description
Service unitcombinationMSB4, MSB6,MSB9
G1/8,G1/4,G1/2,G3/4,G1,G1 1/4,G1 1/2,NPT1/2-14,NPT3/4-14,NPT1-11 1/2,NPT1 1/4-111/2,NPT1 1/2-111/2
550 ... 18,000l/min
0.5 ... 16 bar 0.01 ... 40 µm � Sizes: 4, 6, 9� Combination of filter regulatorMS-LFR, filter MS-LF, fine and microfilter MS-LFM, activated carbon filterMS-LFX, pressure regulator MS-LR,MS-LRB, precision pressure regulatorMS-LRP, MS-LRPB, electrical pressureregulator MS-LRE, lubricator MS-LOE,on-off valve MS-EM, MS-EE, soft-startvalve MS-DL, MS-DE, soft-start/quickexhaust valve MS-SV, membrane airdryer MS-LDM1Internet: .../msb*
Filter regulators: D series, metal
TypePneumaticconnection 1
Standardnominal flowrate
Pressureregulationrange
Operatingpressure
Grade offiltration Description
Filter regulatorLFR, LFRS
G1/8,G1/4,G3/8,G1/2,G3/4,G1,M5,M7,QS-4,QS-6
110 ... 11,000l/min
0.5 ... 12 bar 1 ... 16 bar 5 ... 40 µm � Space-saving design with filter andregulator in a single unit
� Good particle separation and highflow rate
� Good regulation characteristics withminimal hysteresis
� Two pressure gauge connections forflexible installation
� Setting values are secured by lockingthe rotary knob
� With manual, semi-automatic or fullyautomatic condensate drain
� Lockable rotary knobInternet: .../lfr
Filter regulators: D series, polymer
TypePneumaticconnection 1
Standardnominal flowrate
Pressureregulationrange
Operatingpressure
Grade offiltration Description
Filter regulatorLFR-DB
G1/8,G1/4
500 ... 1,200l/min
0.5 ... 12 bar 1 ... 16 bar 5 ... 40 µm � Space-saving design with filter andregulator in a single unit
� Good particle separation and highflow rate
� Good regulation characteristics withminimal hysteresis
� With manual or semi-automaticcondensate drain
� Setting values are secured by lockingthe rotary knobInternet: .../lfr
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 99
1212
Compressed air preparation >
Filter regulators: MS series
TypePneumaticconnection 1
Standardnominal flowrate
Pressureregulationrange
Operatingpressure
Grade offiltration Description
Filter regulatorMS4-LFR,MS6-LFR,MS9-LFR,MS12-LFR
G1/8,G1/4,G3/8,G1/2,Internal
850 ... 21,500l/min
0.3 ... 16 bar 0.8 ... 20 bar 5 ... 40 µm � Good regulation characteristics withlow hysteresis and primary pressurecompensation
� Good particle and condensateseparation
� Available with or without secondaryventing
� High flow rate� MS4-LFR, MS6-LFR: directly actuateddiaphragm regulator,MS9-LFR: pilotedor directly actuated filter-diaphragmregulator, MS12-LFR: Piloteddiaphragm regulator without intrinsicair consumption
� Lockable rotary knob� Return flow option for exhausting fromoutlet port 2 to outlet port 1 alreadyintegratedInternet: .../ms*-lfr
Filters: D series, metal
TypePneumaticconnection 1
Standard nominalflow rate Operating pressure Grade of filtration Description
FilterLF
Connecting plate,G1/8,G1/4,G3/8,G1/2,G3/4,G1,M5,M7,QS-4,QS-6
170 ... 5,300 l/min 0 ... 16 bar 5 ... 40 µm � Good particle and condensateseparation
� High flow rate with minimal pressuredrop
� With manual or fully automaticcondensate drainInternet: .../lf
Fine filterLFMB
Connecting plate,G1/8,G1/4,G3/8,G1/2,G3/4,G1
250 ... 1,250 l/min 1 ... 16 bar 1 µm � High efficiency filter for specialrequirements
� Air quality to DIN ISO 8573-1� Version with differential pressureindicator for optical indication of filtercontaminationInternet: .../lfmb
Micro filterLFMA
Connecting plate,G1/8,G1/4,G3/8,G1/2,G3/4,G1
130 ... 950 l/min 1 ... 16 bar 0.01 µm � High efficiency filter for specialrequirements
� Air quality to DIN ISO 8573-1� Version with differential pressureindicator for optical indication of filtercontaminationInternet: .../lfma
100 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1212
Compressed air preparation >
Filters: D series, metal
TypePneumaticconnection 1
Standard nominalflow rate Operating pressure Grade of filtration Description
Activated carbonfilterLFX
Connecting plate,Manifold module,G1/8,G1/4,G3/8,G1/2,G3/4,G1
300 ... 1,430 l/min 0 ... 16 bar � Removal of liquid and gaseous oilparticles from compressed air usingactivated carbon
� Activated carbon filter cartridgesprovide odour and oil-free air to foodindustry standard
� Residual oil content ≤0.003 mg/m3� Air quality class at the output 1.7.1 toDIN ISO 8573-1Internet: .../lfx
Fine filtercombinationLFMBA
G1/8,G1/4,G3/8,G1/2,G3/4,G1
125 ... 600 l/min 1 ... 16 bar 0.01 µm � High efficiency filter for specialrequirements
� Air quality to DIN ISO 8573-1� Available as pre-assembled filtercombination
� Version with differential pressureindicator for optical indication of filtercontaminationInternet: .../lfmba
Filters: MS series
TypePneumaticconnection 1
Standard nominalflow rate Operating pressure Grade of filtration Description
FilterMS4-LF, MS6-LF,MS9-LF, MS12-LF
G1/8,G1/4,G3/8,G1/2,Internal
1,000 ... 16,000l/min
0 ... 20 bar 5 ... 40 µm � Good particle and condensateseparation
� High flow rate with minimal pressuredrop
� Available with manual,semi-automatic, fully automaticor fully automatic, electricallyactuated condensate drainInternet: .../ms*-lf
Fine filterMS4-LFM,MS6-LFM,MS9-LFM,MS12-LFM
Manifold module,G1/8,G1/4,G3/8,G1/2,G3/4,G1
120 ... 7,600 l/min 0.01 ... 1 µm � High-performance filter forexceptionally clean compressedair
� Air quality to DIN ISO 8573-1� Available with differentialpressure indicator for indicationof contamination
� Available with electronic filterpollution indicatorInternet: .../ms*-lfm
Activated carbonfilterMS4-LFX,MS6-LFX,MS9-LFX,MS12-LFX
Manifold module,G1/8,G1/4,G3/8,G1/2,G3/4,G1
250 ... 6,000 l/min 0.01 ... 1 µm � Removal of liquid and gaseous oilparticles from compressed air usingactivated carbon
� Eliminates odours and vapoursInternet: .../ms*-lfx
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 101
1212
Compressed air preparation >
Filters: Individual devices
Type SizeGrade offiltration
Operatingpressure
Flow rate withrespect toatmosphere
Noisereduction Description
Filter silencerLFU
G1/4,G3/8,G1/2,G1
1 µm 4,000 ...12,500 l/min
Reduction by40 dB
� Removes up to 99.99% of oil andother contaminants from exhaust air
� Manual rotary condensate drain� Exhaust noise reduced regardless offrequencyInternet: .../lfu
Regulators: D series, metal
TypePneumaticconnection 1
Standardnominal flowrate
Pressureregulationrange
Operatingpressure
Max. pressurehysteresis Description
PressureregulatorLR, LRS
G1/8,G1/4,G3/8,G1/2,G3/4,G1,M5,M7,QS-4,QS-6
120 ... 12,500l/min
0.5 ... 12 bar 0 ... 16 bar 0.2 ... 0.5 bar � Suitable for front panel mounting� Lockable design� Two pressure gauge connections fordifferent fitting options
� Mini and Midi sizes: directly actuateddiaphragm regulator
� Maxi size: piloted piston regulator,diaphragm regulator LRS-DI
� Good regulation characteristics withminimal pressure hysteresis
� High flow rate� Return flow option for venting fromoutlet port 2 to inlet port 1
� Available with pressure gauge� Sizes: Micro, Mini, Midi, MaxiInternet: .../lr-1*8
PressureregulatorLRB, LRBS
Connectingplate
1,600 ... 3,800l/min
0.5 ... 12 bar 1 ... 16 bar 0.2 bar � Manifold assembly with through airsupply
� Lockable design� Good regulation characteristics withlow hysteresis and primary pressurecompensation
� For configuring a regulator manifoldwith independent pressure ranges
� Settings secured via detent on rotaryknob and push-in adjustment lock
� Directly actuated diaphragm regulator� Without pressure gauge� Sizes: Mini, MidiInternet: .../lrb-d
PressureregulatorcombinationLRB-K
G1/4,G3/8,G1/2
1,600 ... 3,800l/min
0.5 ... 12 bar 0.2 ... 0.5 bar � With through air supply� Regulator manifold with independentpressure ranges
� Good regulation characteristics withlow hysteresis and primary pressurecompensation
� Settings secured via detent on rotaryknob and push-in adjustment lock
� Directly actuated diaphragm regulator� Without pressure gauge� Sizes: Mini, MidiInternet: .../lrb-1*4
102 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1212
Compressed air preparation >
Regulators: D series, polymer
TypePneumaticconnection 1
Standardnominal flowrate
Pressureregulationrange
Operatingpressure
Max. pressurehysteresis Description
PressureregulatorLR-DB
Connectingplate,G1/8,G1/4
≥1,300 l/min 0.5 ... 7 bar 0 ... 16 bar 0.5 bar � High flow rate� Good regulation characteristics withminimal pressure hysteresis
� Setting values are secured by lockingthe rotary knob
� Available with pressure gauge� Size: MiniInternet: .../lr-db
PressureregulatorcombinationLRB-DB
G1/2 ≥1,000 l/min 0.5 ... 7 bar 0.5 bar � With through air supply� Good regulation characteristics withlow hysteresis and primary pressurecompensation
� Regulator manifold with independentpressure ranges
� Setting values are secured by lockingthe rotary knob
� Without pressure gauge� Size: MiniInternet: .../lrb-db
Regulators: MS series
TypePneumaticconnection 1
Standardnominal flowrate
Pressureregulationrange
Operatingpressure
Max. pressurehysteresis Description
PressureregulatorMS4-LR, MS6-LR,MS9-LR
G1/8,G1/4,G3/8,G1/2
1,000 ...26,500 l/min
0.3 ... 16 bar 0 ... 20 bar 0.25 ... 0.3 bar � Good regulation characteristics withlow hysteresis and primary pressurecompensation
� High flow rate with minimal pressuredrop
� Available with secondary venting� Lockable rotary knob� With pressure sensor with display androtary knob pressure gauge
� Sizes 4, 6, 9� Grid dimension 40, 62, 90 mmInternet: .../ms*-lr
PressureregulatorMS4-LRB,MS6-LRB
G1/2,G1/4
300 ... 7,300l/min
0.3 ... 16 bar 0.25 bar � For manifold assembly with throughair supply
� For configuring a regulator manifoldwith independent pressure regulationranges
� Good regulation characteristics withlow hysteresis and primary pressurecompensation
� Actuator lock to protect set valuesagainst adjustment
� With and without secondary venting� Integrated return flow option forexhausting from output 2 to output 1
� Optional pressure sensor� Optional rotary knob pressure gaugeInternet: .../ms*-lrb
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 103
1212
Compressed air preparation >
Regulators: MS series
TypePneumaticconnection 1
Standardnominal flowrate
Pressureregulationrange
Operatingpressure
Max. pressurehysteresis Description
PressureregulatorMS12-LR
Manifoldmodule
12,000 ...22,000 l/min
0.15 ... 16 bar 0.04 ... 0.4 bar � Good regulation characteristics withlow hysteresis and primary pressurecompensation
� High flow rate with minimal pressuredrop
� Actuator lock to protect set valuesagainst adjustment
� With secondary venting� Pressure gauge connection fordifferent fitting options
� Size: 12� Grid dimension 124 mm� MS12-LR-...-PO: pneumaticallyactuated (pressure range determinedby means of pilot regulator)
� MS12-LR-...-PE6: electrically actuated(pilot control by proportional pressureregulator)Internet: .../ms12-lr
PrecisionpressureregulatorMS6-LRP,MS6-LRPB
G1/4,G3/8,G1/2
800 ... 5,000l/min
0.05 ... 12 bar 0.02 bar � As individual device and for manifoldassembly
� Manifold assembly with through airsupply
� Good regulation characteristics withlow hysteresis and primary pressurecompensation
� Actuator lock to protect set valuesagainst adjustment
� Available with pressure sensor withdisplay
� Size 6� Grid dimension 62 mmInternet: .../ms*-lrp
ElectricalpressureregulatorMS6-LRE
G1/4,G3/8,G1/2
2,200 ... 7,500l/min
0.3 ... 16 bar 0.25 bar � With integrated electric drive unit forindirectly setting the output pressure
� Constant output pressure even in theevent of a power failure thanks to thefail-safe function
� Available with control unit with display� Available with integrated pressuresensor with electrical output
� With or without secondary venting� Size 6� Grid dimension 62 mmInternet: .../ms*-lre
104 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1212
Compressed air preparation >
Regulators: Individual devices
TypePneumaticconnection 1
Standardnominal flowrate
Pressureregulationrange
Operatingpressure
Max. pressurehysteresis Description
PressureregulatorLR-G, LRS-G
G1/8 600 ... 700l/min
0.5 ... 12 bar 0 ... 16 bar 0.2 bar � Lockable design� Sturdy design� For front panel mounting� Excellent flow rates� Precision diaphragm regulatorInternet: .../lr-1*8-g
PrecisionpressureregulatorLRP, LRPS
G1/4 800 ... 2,300l/min
0.05 ... 10 bar 1 ... 12 bar 0.02 bar � Lockable design� Precision pressure adjustmentpossible both in static and dynamicapplications
� Good response characteristics duringrapid modification of supply pressureand flow rate
� Supply pressure fluctuations arealmost entirely compensatedInternet: .../lrp
Lubricators: D series
TypePneumaticconnection 1
Standard nominalflow rate Operating pressure
Min. flow ratefor lubricatoroperation Description
LubricatorLOE
G1/8,G1/4,G3/8,G1/2,G3/4,G1,M5,M7,QS-4,QS-6
160 ... 9,000 l/min 0 ... 16 bar 3 ... 10 l/min � Proportional lubricator with precisionoil metering
� Quick and easy top-up even underpressure
� High flow rate� Sturdy metal housing and transparentlubricator bowl with metal bowl guard
� Oil capacity 6.5 ... 190 cm³� Sizes: Micro, Mini, Midi, Maxi� Grid dimension 25, 40, 55, 66 mmInternet: .../loe
Lubricators: MS series
TypePneumaticconnection 1
Standard nominalflow rate Operating pressure
Min. flow ratefor lubricatoroperation Description
LubricatorMS4-LOE,MS6-LOE,MS9-LOE,MS12-LOE
G1/8,G1/4,G3/8,G1/2,Internal
1,100 ... 27,000l/min
1 ... 16 bar 40 ... 400 l/min � Configurable proportional lubricatorwith precision oil metering
� Quick and easy oil top-up even underpressure
� Flow direction can be selected:left/right, right/left
� Oil capacity 30 ... 1,500 cm³� Sizes: 4, 6, 9, 12� Grid dimension 40, 60, 90, 124 mmInternet: .../ms*-loe
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 105
1212
Compressed air preparation >
On-off and soft-start valves: D series
TypePneumaticconnection 1
Standard nominalflow rate Operating pressure Actuation type Description
On-off valveHE
G1/8,G1/4,G3/8,G1/2,G3/4,G1
1,000 ... 10,000l/min
0 ... 16 bar Manual � 3/2-way valve� Ducted exhaust possible via athreaded connection
� The switching position is immediatelyrecognisable
� Size: Mini, Midi, Maxi� Grid dimension 40, 55, 66 mmInternet: .../he-d
On-off valveHEE
G1/8,G1/4,G3/8,G1/2,G3/4,G1
1,000 ... 6,500l/min
2.5 ... 16 bar Electric � For pressurising and ventingpneumatic installations
� With solenoid coil, without plugsocket
� Solenoid head can be repositioned by4 x 90°
� Detenting and non-detenting manualoverride
� Supply voltage 24 V DC, 110, 230 V AC� Sizes: Mini, Midi, Maxi� Grid dimension 40, 55, 66 mmInternet: .../hee-d
On-off valveHEP
G1/8,G1/4,G3/8,G1/2,G3/4,G1
1,000 ... 6,500l/min
2 ... 16 bar Pneumatic � On-off valve for pressurising andventing pneumatic installations
� As an individual device or incombination with other D seriesmodules
� Especially suitable for applicationsrequiring explosion protection
� Size: Mini, Midi, Maxi� Grid dimension 40, 55, 66 mmInternet: .../hep
Soft-start valveHEL
G1/8,G1/4,G3/8,G1/2,G3/4,G1
1,000 ... 6,500l/min
3 ... 16 bar Pneumatic � For gradual pressure build-up (for usewith on-off valves HE and HEE)
� For advancing drives slowly andreliably into the initial position
� For avoiding sudden and unexpectedmovements
� Adjustable switching time delay� Sizes: Mini, Midi, Maxi� Grid dimension 40, 55, 66 mmInternet: .../hel
106 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1212
Compressed air preparation >
On-off and soft-start valves: MS series
TypePneumaticconnection 1
Standard nominalflow rate Operating pressure Actuation type Description
On-off valveMS4-EM1,MS6-EM1,MS9-EM,MS12-EM
Manifold module,G1/8,G1/4,G3/8,G1/2
1,200 ... 32,000l/min
0 ... 21 bar Manual � For slowly pressurising and ventingpneumatic installations
� At port 3 a silencer can be attached orthe exhaust air can be ducted
� Available with pressure gauge andpressure sensor with display
� Size: 4, 6, 9, 12� Grid dimension 40, 62, 90, 124 mmInternet: .../ms*-em
On-off valveMS4-EE,MS6-EE, MS9-EE,MS12-EE
Manifold module,G1/8,G1/4,G3/8,G1/2
1,000 ... 32,000l/min
3 ... 18 bar Electric � Supply voltage 24 V DC, 110, 230 V AC� For slowly pressurising and ventingpneumatic installations
� Available with pressure sensor withdisplay
� With solenoid coil, without plugsocket
� Sizes: 4, 6, 9, 12� Grid dimension 40, 62, 90, 124 mmInternet: .../ms*-ee
Soft-start valveMS4-DL,MS6-DL,MS12-DL
Manifold module,G1/8,G1/4,G3/8,G1/2
1,000 ... 42,000l/min
2 ... 21 bar Pneumatic � For slowly pressurising and ventingpneumatic installations (for use withon-off valves EM1 and EE)
� For advancing the drives slowly andreliably into the initial position
� For avoiding sudden and unexpectedmovements
� Adjustable switching time delay� Sizes: 4, 6, 12� Grid dimension 40, 62, 124 mmInternet: .../ms*-dl
Soft-start valveMS4-DE,MS6-DE,MS12-DE
Manifold module,G1/8,G1/4,G3/8,G1/2
1,000 ... 42,000l/min
3 ... 18 bar Electric � Supply voltage 24 V DC, 110, 230 V AC� For slowly pressurising and ventingpneumatic installations
� For advancing the drives slowly andreliably into the initial position
� For avoiding sudden and unexpectedmovements
� Adjustable switching time delay� Size 4, 6, 12� Grid dimension 40, 62, 124 mmInternet: .../ms*-de
Soft-start andexhaust valveMS6-SV
G1/2 4,300 l/min 3.5 ... 10 bar Electric � Complies with standard DIN EN ISO13849-1
� For reducing pressure quickly andreliably and for building up pressuregradually
� A switching time delay adjusted via aflow control valve for gradual pressurebuild-up
� Available with silencer� Supply voltage 24 V DC� Size 6� Grid dimension 62 mmInternet: .../ms6-sv
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 107
1212
Compressed air preparation >
On-off and soft-start valves: Individual devices
TypePneumaticconnection 1
Standard nominalflow rate Operating pressure Actuation type Description
On-off valveHE-LO
G1/8,G1/4,G3/8,G1/2,G3/4,G1
1,000 ... 10,000l/min
0 ... 16 bar Manual � To safety standard� For shutting off the compressedair supply whilst simultaneouslyexhausting systems powered bycompressed air
� Can be locked in the closed position� Screwed into piping, through-holesfor wall mountingInternet: .../he*lo
Solenoid valve,pneumatic valveMFHE, VLHE
G1/4,G3/8,G1/2
1,200 ... 2,900l/min
2 ... 12 bar Electric, pneumatic � For F solenoid coils� Piloted� On-off valve in combination withservice units
� Soft-start valve� Manual override, detentingInternet: .../mfhe
Air dryers: D series
TypePneumaticconnection 1
Standardnominal flowrate
Operatingpressure
Pressure dewpoint
Pressure dewpoint reduction Description
Membrane airdryerLDM1
G1/2,G3/4,G1
300 ... 1,000l/min
3 ... 12.5 bar 17 ... 20 K � Final dryer with excellent operationalreliability
� Flow rate-dependent dew pointreduction
� Wear-free function requiring noexternal energy
� Size: Maxi� Grid dimension 66 mm� Individual device with or withoutsub-bases, for service unitcombinationInternet: .../ldm1
Air dryers: MS series
TypePneumaticconnection 1
Standardnominal flowrate
Operatingpressure
Pressure dewpoint
Pressure dewpoint reduction Description
Membrane airdryerMS4-LDM1,MS6-LDM1
G1/8,G1/4,G3/8,G1/2
50 ... 400 l/min 20 K � Final dryer with excellent operationalreliability
� Suitable for use as an individualdevice or for integration into existingservice unit combinations
� Flow rate-dependent dew pointreduction
� Wear-free function requiring noexternal energy
� Sizes: 4, 6� Grid dimension 40, 62 mmInternet: .../ms*-ldm1
108 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1212
Compressed air preparation >
Air dryers: Individual devices
TypePneumaticconnection 1
Standardnominal flowrate
Operatingpressure
Pressure dewpoint
Pressure dewpoint reduction Description
Adsorption dryerPDAD
G3/8,G1/2
10 ... 1,000l/min
-40 °C � Produced for decentralisedcompressed air drying
� Greater service life of pneumaticcomponents
� Additional filtering of oil andparticulates
� Defined pressure dew point� High flow rate� Low purge air consumption and noiselevelsInternet: .../pdad
Compressed air distribution units: D series
Type Pneumatic connection 1Standard nominal flow ratein main flow direction 1->2 Operating pressure Description
BranchingmoduleFRM
G1/8,G1/4,G3/8,G1/2,G3/4,G1
1,100 ... 20,000 l/min 0 ... 16 bar � Designs with integrated non-returnfunction, with pressure switch
� Several additional air connections forgreater flexibility
� Can be used as an intermediatedistributor for varying air qualities
� Sizes: Mini, Midi, Maxi� Grid dimension 40, 55, 66 mmInternet: .../frm
Distributor blockFRZ
Manifold module � Sizes: Micro, Mini, Midi, Maxi� Grid dimension 25, 40, 55, 66 mm� Several additional air connections forgreater flexibilityInternet: .../frz
Compressed air distribution units: MS series
Type Pneumatic connection 1Standard nominal flow ratein main flow direction 1->2 Operating pressure Description
Distributor blockMS4-FRM,MS6-FRM,MS9-FRM,MS12-FRM
Manifold module,G1/8,G1/4,G3/8,G1/2,G3/4,G1,G1 1/4,G1 1/2,NPT1/2-14,NPT3/4-14,NPT1-11 1/2,NPT1 1/4-11 1/2,NPT1 1/2-11 1/2
1,200 ... 50,000 l/min 0 ... 21 bar � Designs with integrated non-returnfunction, with pressure switch
� Pneumatic manifold with 4connections
� Can be used as an intermediatedistributor for varying air qualities
� Outlet at top and bottom� Available with pressure sensor withdisplay
� Sizes 4, 6, 9, 12� Grid dimension 40, 62, 90, 124 mmInternet: .../ms*-frm
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 109
1212
Compressed air preparation >
Compressed air distribution units: MS series
Type Pneumatic connection 1Standard nominal flow ratein main flow direction 1->2 Operating pressure Description
Distributor blockMS4-FRM-FRZ,MS6-FRM-FRZ
G1/4,G1/2
4,050 ... 14,600 l/min 0 ... 20 bar � Pneumatic manifold with 4connections
� Outlet at top and bottom� Can be used as an intermediatedistributor for varying air qualities
� Can be used as an intermediatedistributor between two pressureregulators with large rotary knob withpressure gauge on size MS4
� Sizes: 4, 6� Grid dimension 40, 62 mmInternet: .../ms*-frm-frz
Condensate drains
Type Pneumatic connection Operating pressure Description
CondensatedrainWA
M9 0 ... 16 bar � For attachment to service units andcompressed air networks/systems
� Automatic emptying after the max. filllevel has been reached
� Automatic emptying after theoperating pressure p < 0.5 bar isswitched off
� Manual actuation during operation ispossibleInternet: .../wa
CondensatedrainPWEA
G1/2 0.8 ... 16 bar � Fully automatic condensate drain withintegrated electrical controller
� Interface for communicating withmaster control device
� Reliable thanks to non-contactingcapacitive sensor
� Can be used with service units orsimply in piping systems
� Ready status and switching statusindicated via LEDs and electricalinterfaceInternet: .../pwea
Pressure amplifiers
Type Pneumatic connection 1 Output pressure 2 Supply pressure 1 Description
Pressure boosterDPA
G1/4,G3/8,G1/2
4 ... 16 bar 2 ... 10 bar � Minimal loss of volume due to valveactivation
� Designed as a pressure booster/airreservoir combination
� Any mounting position� Short filling times� Long service life� Compact design� Available with sensing optionInternet: .../dpa
110 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1212
Compressed air preparation >
Pressure indicators
TypeType ofmounting Display range
Pneumaticconnection
Operatingpressure
Measurementaccuracy class Description
Pressure gaugeMA, MAP
In-lineinstallation
0 ... 25 bar G1/8,G1/4,M5,QS-4,QS-6,QS-8,R1/8,R1/4
0 ... 25 bar 1.6,2.5,4,5
� Designs based on DIN EN 837-1,available with red-green range
� Precision pressure gauge� Accuracy of measurement class MA:2.5, MAP: 1.6
� Pneumatic connection via R, metric orG thread, push-in connector
� Display units bar, psi, MPaInternet: .../ma
Flanged pressuregaugeFMA
Front panelmounting
0 ... 16 bar G1/4 0 ... 16 bar 1.6,2.5
� Design to DIN ISO 837-1� Pneumatic connection via G thread� Front panel mounting� Display units bar, psiInternet: .../fma
Flangedprecisionpressure gaugeFMAP
Front panelmounting
0 ... 16 bar G1/4 0 ... 16 bar 1 � Complies with standard DIN EN 837-1� Pneumatic connection via G thread� Display units bar, psi� Front panel mountingInternet: .../fmap
Pressure gaugekitDPA-MA-SET
Viamale thread G1/8,G1/4,R1/8
10 ... 16 bar 2.5,4
� For pressure booster DPA� For monitoring the supply and outputpressure
� Pneumatic connection via R, G threadInternet: .../dpa*set
Vacuum gaugeVAM, FVAM
Front panelmounting,Screw-in
-1 bar,-1 ... 9 bar
G1/8,G1/4,R1/8,R1/4
-1 bar,-1 ... 9 bar
2.5 � Designs based on standard DIN EN837-1, available with red-green range
� Pneumatic connection via R, G thread� Screw-in or front panel mounting� Double or single scale� Display units bar, inHg, psiInternet: .../vam
Pressure gaugePAGN
In-lineinstallation
0 ... 16 bar M5,QS-1/4,QS-3/8,QS-4,QS-6,QS-8,QSP-10
0 ... 16 bar 2.5,4
� Display units bar, psi� Pneumatic connection via QSP-10� Mounting via retaining clampInternet: .../pagn
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 111
1212
Compressed air preparation >
Customised components � for your specific requirementsComponents forcompressed air preparationwith customised designsCan�t find the compressedair preparation componentsyou need in our catalogue?We can offer you customisedcomponents that aretailored to your specificrequirements � from minorproduct modifications tocomplete new productdevelopments.
Common product modifications:� Modified pressure range� Rotary knob: in special colour, withprotection against rotation
� Fitting: integrated throttling port, specialthread
� Tubing with special printing� Pressure gauge with red/green rangeMany additional variants are possible. Askyour Festo sales engineer, who will be happyto help.Further information on customisedcomponents can be found on your localwebsite at www.festo.com
112 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1212
Pneumatic connection technology >
Software toolTubing selection Simply enter parameters such as working
pressure, chemicals and required resistanceto cleaning agents and have the programcalculate the right tubing for yourapplication.This tool can be found on the website underSupport in the Engineering software area asa download or on the DVD under Selectionand sizing.
Standard O.D. tubing
Type O.D. I.D.
Temperature-dependentoperating pressure
Ambienttemperature Description
Plastic tubing,DUO tubingPUN, PUN-DUO
3 ... 16 mm 2.1 ... 11 mm -0.95 ... 10 bar -35 ... 60 °C � Highly flexible plastic tubing� Polyurethane� RoHS-compliant� Operating media compressed air,vacuum
� Suitable for use with energy chains� High resistance to stress cracks� Designed as DUO tubingInternet: .../pun
Plastic tubing,DUO tubingPUN-H,PUN-H-DUO
3 ... 16 mm 2.1 ... 11 mm -0.95 ... 10 bar -35 ... 60 °C � Polyurethane� Designed as DUO tubing� Operating media compressed air,vacuum, water
� Approved for use in the food industry� High resistance to microbes andhydrolysis
� Suitable for use with energy chainsInternet: .../pun-h
Plastic tubingPUN-CM
4 ... 12 mm 2.5 ... 8 mm -0.95 ... 10 bar -35 ... 60 °C � Highly flexible plastic tubing,antistatic, electrically conductive
� Polyurethane� Operating media compressed air,vacuum
� High resistance to UV radiation� Suitable for use with energy chainsInternet: .../pun-cm
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 113
1313
Pneumatic connection technology >
Standard O.D. tubing
Type O.D. I.D.
Temperature-dependentoperating pressure
Ambienttemperature Description
Plastic tubingPUN-V0
3 ... 16 mm 2 ... 11.8 mm -0.95 ... 30 bar -35 ... 60 °C � Highly flexible single-sheath plastictubing
� Flame retardant to UL 94 V0 ... V2� For use in the immediate vicinity ofwelding applications
� Polyurethane� Operating media compressed air,vacuum
� High resistance to microbes andhydrolysisInternet: .../pun-v0
Plastic tubingPEN
4 ... 16 mm 2.7 ... 10.8 mm -0.95 ... 10 bar -30 ... 60 °C � Polyethylene� RoHS-compliant� Operating media compressed air,vacuum
� Good resistance to chemicals and verygood hydrolysis resistance
� Resistant to most cleaning agents andlubricantsInternet: .../pen
Plastic tubingPAN
4 ... 16 mm 2.9 ... 12 mm -0.95 ... 19 bar -30 ... 80 °C � High thermal and mechanical loadcapacities
� High resistance to microbes� Polyamide� Operating media compressed air,vacuumInternet: .../pan
Plastic tubingPAN-R
4 ... 16 mm 2.5 ... 10 mm -0.95 ... 35 bar -30 ... 80 °C � For applications with a high pressurerange
� High resistance to microbes� Polyamide� Operating media compressed air,vacuumInternet: .../pan-r
Plastic tubingPAN-V0
6 ... 14 mm -0.95 ... 12 bar -30 ... 90 °C � Double-sheath tubing� PVC, polyamide� Flame retardant to UL 94 V0� Operating media compressed air,vacuum, water, mineral oil
� High resistance to microbes, UVradiation
� Suitable for use with energy chainsInternet: .../pan-v0
Plastic tubingPLN
4 ... 16 mm 2.9 ... 12 mm -0.95 ... 14 bar -30 ... 80 °C � High resistance to chemicals,microbes, hydrolysis
� Approved for foodstuffs� Resistant to most cleaning agents andlubricants
� Operating media compressed air,vacuum, water
� Polyethylene� RoHS-compliantInternet: .../pln
114 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1313
Pneumatic connection technology >
Standard O.D. tubing
Type O.D. I.D.
Temperature-dependentoperating pressure
Ambienttemperature Description
Plastic tubingPFAN
4 ... 12 mm 2.9 ... 8.4 mm -0.95 ... 16 bar -20 ... 150 °C � Pneumatic tubing with resistance tohigh temperatures and chemicals
� Approved for foodstuffs� High resistance to chemicals,microbes, UV radiation, hydrolysis,stress cracks
� Perfluoroalkoxy alkane� RoHS-compliant� Operating media compressed air,vacuumInternet: .../pfan
Standard I.D. tubing
Type O.D. I.D.
Temperature-dependentoperating pressure
Ambienttemperature Description
Plastic tubing,DUO tubingPU, PU-DUO
3.2 ... 17.6 mm 2.3 ... 13 mm -0.95 ... 10 bar -35 ... 60 °C � Highly flexible plastic tubing� High resistance to abrasion and kinks� Polyurethane, PU-9 and PU-13:polyurethane with reinforcing fabric
� Operating media compressed air,vacuum
� Suitable for use with energy chains� Designed as DUO tubingInternet: .../pu
Plastic tubingPL
4.3 ... 17.6 mm 3 ... 13 mm -0.95 ... 9 bar -30 ... 60 °C � High resistance to microbes� Operating medium compressed air� PL-3, PL-4, PL-6: food industryapproval in accordance with Directive2002/72/EC and FDA
� Polyurethane, PL-9 and PL-13: PVCwith reinforcing fabric
� RoHS-compliantInternet: .../pl
Plastic tubingPCN
6.5 mm 4 mm -0.5 ... 0.25 bar -10 ... 60 °C � For use with condensate drains on Dseries service units
� PVC with reinforcing fabric� Operating media compressed air,waterInternet: .../pcn
Rubber hoseP
13 ... 31 mm 6 ... 19 mm -0.95 ... 16 bar -20 ... 80 °C � P-6 and P-9: Nitrile rubber� P-13 and P-19: ethylene propylenerubber, styrene butadiene rubber
� With tubing for barbed hose fitting N� Operating media compressed air,vacuum, waterInternet: .../p
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 115
1313
Pneumatic connection technology >
Spiral tubing
Type O.D. I.D.Workinglength
Temperature-dependentoperatingpressure
Ambienttemperature Description
Spiral plastictubing, DUOspiral plastictubingPUN-S,PUN-S-DUO
4 ... 12 mm 2.6 ... 8 mm 0.5 ... 6 m -0.95 ... 10 bar -35 ... 60 °C � Highly flexible plastic tubing� Suitable for use with energy chains� Polyurethane� High resistance to UV radiation, stresscracks
� Operating media compressed air,vacuum
� Designed as DUO tubingInternet: .../spiral
Spiral plastictubingPUN-SG
9.5 ... 11.7 mm 6.4 ... 7.9 mm 2.4 ... 6 m -0.95 ... 15 bar -40 ... 60 °C � Pre-assembled with captive rotatablefittings
� Polyurethane, nickel-plated brass,polyacetal
� High resistance to microbes,hydrolysis
� Operating media compressed air,vacuumInternet: .../spiral
Spiral plastictubingPPS
6.3 ... 7.8 mm 4.7 ... 6.2 mm 7.5 ... 15 m -0.95 ... 21.2bar
-30 ... 80 °C � Pre-assembled with 2 rotatablefittings and captive OL sealing rings
� Polyamide, brass, galvanised steel� Operating media compressed air,vacuum, water
� Suitable for use with energy chains� High resistance to microbes� RoHS-compliantInternet: .../pps
116 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1313
Pneumatic connection technology >
Push-in fittings
TypePneumaticconnection
Pneumaticconnection,outlet
Operatingpressure
Temperature-dependentoperatingpressure
Ambienttemperature Description
Push-in fittingQSM, QSM-I,QSMF, QSMP,QSMS, QSMC,QSM-H, QSMC-H,QSML, QSMLL,QSMLV-I,QSMLLV-I,QSML-H, QSMT,QSMTL, QSMX,QSMY
Male threadG1/8, M3, M5,M6, M6x0.75,M7, M8x0.75,R1/8,Female threadM3, M5,Push-in sleeveQS-3, QS-4,QS-6,For tubing O.D.3, 4, 6 mm
For tubing O.D.3, 4, 6 mm
-0.95 ... 14 bar -10 ... 80 °C � Quick Star, Mini� Compact for maximum componentdensity in confined spaces
� Male or female thread with externalor internal hex
� Push-in fitting� Push-in connector� Push-in bulkhead connector� Push-in cap� Push-in connector with push-in sleeve� Blanking plugInternet: .../qsm
Push-in fittingQSM-B, QSM-B-I,QSML-B, QSMT-B
Male threadM3, M5, M6,M7, R1/8,For tubing O.D.3, 4, 6 mm
For tubing O.D.3, 4, 6 mm
-0.95 ... 10 bar -10 ... 60 °C � Quick Star, Mini� Compact for maximum componentdensity in confined spaces
� Male thread with external or internalhexInternet: .../qsm-b
Push-in fittingQS, QS-I, QSF,QSS, QSS-F,QSSF, QSC, QS-H,QSH, QSC-H,QSL, QSLL, QSLF,QSLV-I, QSLV,QSL-H, QSL-HL,QST, QSTF, QSTL,QSW, QSW-HL,QSX, QSY, QSY-H,QSYL, QSYLV,QSYTF
Male threadG1/2, G1/4,G1/8, G3/8,M5, R1/2,R1/4, R1/8,R3/8,Female threadG1/8, G1/4,G3/8, G1/2,Push-in sleeveQS-4, QS-6,QS-8, QS-10,QS-12, QS-16,For tubing O.D.4, 6, 8, 10, 12,16 mm
Female threadG1/8, G1/4,G3/8, G1/2,For tubing O.D.4, 6, 8, 10, 12,16 mm
-0.95 ... 14 bar -10 ... 80 °C � Quick Star, standard� Male or female thread with externalor internal hex
� Push-in fitting� Push-in connector� Push-in bulkhead connector� Push-in bulkhead connector with fixedcollar
� Push-in cap� Push-in connector with push-in sleeve� Push-in sleeve� Blanking plugInternet: .../qs
Push-in fittingQS-B, QS-B-I,QSL-B, QSLL-B,QST-B, QSTL-B,QSY-B
Male threadR1/8, R1/4,R3/8, R1/2,For tubing O.D.4, 6, 8, 10, 12,16 mm
For tubing O.D.4, 6, 8, 10, 12,16 mm
-0.95 ... 10 bar -10 ... 60 °C � Quick Star, standard� Male thread with external or internalhex
� Push-in fitting� Push-in connectorInternet: .../qs-b
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 117
1313
Pneumatic connection technology >
Push-in fittings
TypePneumaticconnection
Pneumaticconnection,outlet
Operatingpressure
Temperature-dependentoperatingpressure
Ambienttemperature Description
Push-in fittingQS-F, QS-F-I,QSF-F, QSSF-F,QS-F-H, QSS-F,QSH-F, QSC-F-H,QSC-F-I, QSL-F,QSLL-F, QST-F,QSY-F
G1/8, G1/4,G3/8, G1/2,M5, M7,Push-in sleeveQS-4, QS-6,QS-8, QS-10,QS-12,For tubing O.D.4, 6, 8, 10, 12mm
For tubing O.D.4, 6, 8, 10, 12mm
-0.95 ... 16 bar 0 ... 150 °C � Quick Star, metal� Solid-metal push-in fitting withchrome plated surface coating.
� High corrosion resistance (corrosionresistance class 3 according to Festostandard 940070) and chemicalresistance
� Approved for use in the food andpackaging industry
� Male or female thread with externalor internal hex
� Push-in fitting� Push-in bulkhead connector� Push-in fitting with push-in sleeve� Push-in connector� Push-in bulkhead connector� Push-in connector with push-in sleeve� Push-in sleeve� Blanking plug� Blanking screwInternet: .../qs-f
Push-in fittingNPQM
G1/8, G1/4,G3/8, G1/2,M5, M7,Push-in sleeveQS-4, QS-6,QS-8, QS-10,QS-12,For tubing O.D.4, 6, 8, 10, 12mm
For tubing O.D.3, 4, 6, 8, 10,12 mm
-0.95 ... 16 bar -20 ... 70 °C � Low-cost metal variant� Push-in connector with push-in sleeve� Male or female thread with externalor internal hex
� Push-in bulkhead connector� Housing made from nickel-platedbrass
� Push-in L-fitting� Multiple distributor� Push-in T-fitting� Push-in T-connector� Push-in Y-connectorInternet: .../npqm
Push-in fittingCRQS, CRQSS,CRQSL, CRQST,CRQSY
Male threadM5, R1/8,R1/4, R3/8,R1/2,For tubing O.D.4, 6, 8, 10, 12,16 mm
For tubing O.D.4, 6, 8, 10, 12,16 mm
-0.95 ... 10 bar -15 ... 120 °C � Quick Star, stainless steel� Maximum corrosion resistance(corrosion resistance class 4according to Festo standard 940 070)and chemical resistance
� Approval for use in the food processingand packaging industry
� Male thread with internal and externalhex
� Push-in fitting� Push-in connector� Push-in bulkhead connectorInternet: .../crqs
118 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1313
Pneumatic connection technology >
Push-in fittings
TypePneumaticconnection
Pneumaticconnection,outlet
Operatingpressure
Temperature-dependentoperatingpressure
Ambienttemperature Description
Push-in fittingNPQP
Male threadR1/8, R1/4,R3/8, R1/2,Push-in sleeveQS-4, QS-6,QS-8, QS-10,QS-12,For tubing O.D.4, 6, 8, 10, 12mm
-0.95 ... 10 bar -20 ... 60 °C � Low-cost alternative to stainlesssteel: in combination with tubing PLNresistant to most cleaning agents
� Housing made from polypropylene� Male thread with external hex� Push-in bulkhead connector� Blanking plug� Push-in L-fitting� Push-in L-connector� Push-in T-fitting� Push-in T-connector� Push-in Y-fittingInternet: .../npqp
Push-in fittingQS-V0, QSL-V0,QST-V0
G1/8, G1/4,G3/8, G1/2,R1/8, R1/4,R3/8, R1/2,For tubing O.D.4, 6, 8, 10, 12mm
For tubing O.D.4, 6, 8, 10, 12mm
-0.95 ... 10 bar 0 ... 60 °C � Quick Star, flame-retardant� For use in all areas where there is arisk of fire
� Male thread with external hex� Push-in fitting� Push-in connectorInternet: .../qs-v0
Self-sealing/rotarypush-in fittingQSK, QSSK,QSKL, QSR, QSRL
Male threadG1/8, G1/4,G3/8, G1/2,M5, R1/8,R1/4, R3/8,R1/2,For tubing O.D.4, 6, 8, 10, 12mm
For tubing O.D.4, 6, 8, 10, 12mm
-0.95 ... 14 bar -10 ... 80 °C � Quick Star, standard� Male thread with external hex� Self-sealing push-in fitting� Self-sealing push-in connector� Push-in bulkhead connector� Rotary push-in fittingInternet: .../qsk
Barbed fittings
Type Nominal sizePneumaticconnection
Operatingpressure
Temperature-dependentoperatingpressure
Ambienttemperature Description
Barbed fittingN, CN, SCN, RTU,LCN, LCNH, L-PK,TCN, T-PK, V-PK,Y-PK, FCN, CRCN
1.3 ... 16.5 mm G1/8, G1/4,G3/8, G1/2,G3/4,M3, M3x0.5,M4, M5,M6x0.75,M10x1, M12x1,NPT1-11 1/2,PK-2, PK-3,PK-4, PK-6,PK-9, PK-13,PK-19,R1
0 ... 60 °C � Barbed fitting� Barbed bulkhead fitting� Barbed tubing connector� Barbed T-connector� With male thread or with male threadand external hex
� Stainless steel designInternet: .../cn
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 119
1313
Pneumatic connection technology >
Barbed fittings
Type Nominal sizePneumaticconnection
Operatingpressure
Temperature-dependentoperatingpressure
Ambienttemperature Description
Female hoseconnectorC-P, N-P, N-MS,SK
2.5 ... 16.5 mm G1/8, G1/4,G3/8, G1/2,G3/4, M5,NPT1-11 1/2,PK-3, PK-4,PK-6, PK-9,PK-13, PK-19,R1
� For hose clip� Barbed hose fitting with or withoutsealing ring
� Hose clip to DIN 3017� Brass, aluminium designInternet: .../c-1
Quick connectorACK, CK, CK-KU,QCK, SCK,SCK-KU, CV-PK,GCK-KU, LCK,LCK-KU, LCKN,TCK, KCK-KU,FCK-KU, MCK,MCK-KU, LK,LK-KU, TK, TK-KU,VT-2, VT-3
1.7 ... 12 mm G1/8, G1/4,G3/8, G1/2,M5, M6x0.75,M10x1, M12x1,M16x1,PK-13 withunion nut,PK-3 withunion nut,PK-4 withunion nut,PK-6 withunion nut,PK-9 withunion nut,R1/8, R1/4,R3/8
-0.9 ... 16 bar � Quick connector� Bulkhead quick connector� Sealing cap for plastic tube fittingsand barbed fittings
� T-distributor� Union nut for CK tube fitting� Multiple distributor� Female or male thread with sealingring
� Aluminium or polymer designInternet: .../ck
Threaded fittings
TypePneumaticconnection 1
Pneumaticconnection 2 Operating pressure
Ambienttemperature Description
Threaded fittingNPFB-S, QM,NPFB-R, QMR,NPFB-E, NPFB-D,NPFB-R, SCM,NPFB-L, NPFB-T,NPFB-Y, NPFB-X
G1/8, G1/4, G3/8,G1/2, G3/4, G1,M5, M7,R1/8, R1/4, R3/8,R1/2, R3/4, R1
G1/8, G1/4, G3/8,G1/2, G3/4, G1,M5,R1/8, R1/4, R3/8,R1/2, R3/4, R1
-0.95 ... 40 bar -20 ... 150 °C � Sleeve� Reducing sleeve� Extension� Double nipple� Reducing nipple� Female bulkhead connector� Fitting� With male and female threadInternet: .../npfb
Blanking plug,double nippleB, D, E, ESK, SCM,QM, QMR
G1/8, G1/4, G3/8,G1/2, G3/4, G1,M3, M5, M7,R1/8, R1/4, R3/8,R1/2
G1/8, G1/4, G3/8,G1/2, G3/4, G1,M3, M5, M7,R1/8, R1/4, R3/8,R1/2
� Blanking plug� Reducing nipple� Double nipple� Bulkhead fitting� Sleeve� Reducing sleeve� With male and female threadInternet: .../esk
120 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1313
Pneumatic connection technology >
Piping
Type O.D.
Informationon tubingmaterials
Operatingpressure
Temperature-dependentoperatingpressure
Ambienttemperature Description
Plastic pipePQ-PA
12 ... 28 mm PA -0.95 ... 7 bar -25 ... 75 °C � Rigid pipe made from high-qualitypolyamide
� Operating medium: compressed air,vacuum, fluids
� Flexible, maintenance-free� Smooth inside wall ensures optimumflow conditionsInternet: .../pq
PipePQ-AL
12 ... 28 mm Wroughtaluminiumalloy
-0.95 ... 7 bar -30 ... 75 °C � Rigid aluminium pipe� Operating medium: compressed air,vacuum, fluids
� Corrosion-resistant� Smooth inside wall ensures optimumflow conditionsInternet: .../pq
Plastic-coatedmetal tubePM
6 ... 8 mm Wroughtaluminiumalloy,PE
-0.95 ... 30 bar -29 ... 65 °C � Operating media compressed air,vacuum
� Resistant to deformation� Can be bent straight and reshapedseveral times without a pipe-bendingdevice and without being damaged
� Polyethylene, wrought aluminiumalloy
� RoHS-compliantInternet: .../pm
Push-in fittings for piping PQ
TypePneumaticconnection Nominal size
Operatingpressure
Temperature-dependentoperatingpressure
Ambienttemperature Description
Push-in fittingCQ, CQ-H,CQH-QS, CQC-H,CQL, CQT, CQD,CQA, CQSR, CQO
Male threadG3/8, G1/2,G3/4, G1,Push-in sleeveCQ-12, CQ-15,CQ-18, CQ-22,CQ-28,Push-in sleeveQS-12, QS-16,Forpipe/tubingO.D. 12, 15, 18,22, 28 mm
8 ... 24.9 mm -0.95 ... 15 bar -25 ... 75 °C � For pipes PQ-PA, PQ-AL and tubingPAN and PUN
� Operating medium: compressed air,vacuum, fluids
� Push-in fitting� Push-in connector� Push-in connector with push-in sleeve� Push-in sleeve� Blanking plug� Distributor� Fluid separator� Retaining ring� Releasing tool� Male threadInternet: .../cq
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 121
1313
Pneumatic connection technology >
Couplings
TypePneumaticconnection
Standard nominalflow rate Operating pressure
Ambienttemperature Description
Quick couplingsocket, quickcoupling plugKD1, KD2,KD3, KD4,KD5, KD3-A-R,KD4-A-R, KS1,KS2, KS3, KS4,KS5, KS3-A-R,KS4-A-R
Male thread G1/8,G1/4, G1/2, M5,G1/8, G1/4, G3/8,G1/2,Female threadG1/8, G1/4, G3/8,G1/2, M5,M3, M5,PK-2, P-13,Via union nut: PK-3,PK-4, PK-6, PK-9,PK-13,Barbed fitting PK-6,PK-9
44 ... 1,120 l/min -0.95 ... 15 bar -10 ... 80 °C � Quick connection coupling forstandard applications without safetyfunction
� With male or female thread or withbarbed fitting or quick connector
� Shut-off at one or both endsInternet: .../kd1
Quick couplingsocket, quickcoupling plugKDMS, KDS, KSS
Male thread G1/4,G3/8, G1/2,G1/8, G1/4, G3/8,G1/2,Female threadG1/4, G3/8, G1/2,Via union nut: PK-9,PK-13,Barbed fitting PK-9
1,240 ... 1,818l/min
-0.95 ... 12 bar -10 ... 60 °C � Safety coupling� Shut-off on one side� With male or female thread� Coupling variants: plastic and metalInternet: .../kdms
Distributors
Type
Pneumaticconnection,supply line
Pneumaticconnection
Pneumaticconnection,outlet
Number ofsupply lines
Number ofoutlets
Max.rotationalspeed Description
MultipledistributorQSLV, QSQ, QST3
Male threadG1/4, G1/8,G3/8, G1/2,Male threadR1/8, R1/4,R3/8, R1/2,For tubingO.D. 6, 8, 10mm
For tubingO.D. 4, 6, 8,10, 12 mm
1 2 ... 6 � Quick Star, standard� Temperature range up to 80 °C� L-shape, T-shape� Rotatable 360°� Connection via threaded connectionor push-in connector
� Reducing designInternet: .../qslv
Distributor blockFR
G1/8, G3/8,G1/2, G3/4,R1/8, R1/4,R3/8, R1/2
G1/8, G1/4,G1/2,M3, M5,PK-3, PK-4,R1/8, R1/4,R3/8, R1/2
1 3 ... 12 � Die-cast aluminium or anodisedaluminium
� Operating pressure 0 ... 16 bar� 4, 8, 9 or 12 connectionsInternet: .../fr-4
RotarydistributorGF
Male threadG1/4, G3/8,G1/8, G1/4,G1/2,FemalethreadG1/4, G3/8,Femalethread
G1/8, G1/4,G1/2, M5
300 ...3,000 rpm
� 4 outlets or 2 axial and radial outlets� Single or multiple rotary distributor� Design with air through-feeds� Operating pressure -0.95 ... +10 barInternet: .../gf
122 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1313
Electrical connection technology >
Software toolConfigurator Compile a product with numerous features
reliably and quickly with the help of theconfigurator.Select all the required product featuresstep-by-step. The use of logic checksensures that only correct configurations areavailable for selection.The configurator is part of the electroniccatalogue and is not available as a separatesoftware program.
Universal connecting cables
Type Electrical connection Cable length Description
Connecting cableNEBU
4-pin/3-wire,4-pin/3-pin,4-pin/4-wire,4-pin/5-pin,5-pin/4-pin,8-pin,A-coded/A-coded,Straight socket/cable,Straight socket/straight plug,Angled socket,M12x1,M12x1/M12x1,M5x0.5/M12x1,M5x0.5/M8x1,M5x0.5/open end,Straight plug/straight socket,Square design/open end
0.1 ... 30 m � Designs for static, standard, energychain and robot applications
� Design with switching status display� Designs for connecting sensors andactuatorsInternet: .../nebu
Plug socket withcableSIM
3-pin,4-pin,8-pin,Straight socket,Angled socket,M12x1,Clip-on
2 ... 10 m � Easy-to-clean design approved for usein the food industry
� Welding field-resistant design� Design with clip-on socketInternet: .../sim
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 123
1414
Electrical connection technology >
Universal connecting cables
Type Electrical connection Cable length Description
Connecting cableKM8, KM12
3-pin/3-pin,4-wire,4-pin/3-pin,4-pin/4-pin,8-pin/8-pin,Cable,M12x1/M12x1,M12x1/M8,M12x1/M8x1,M8x1/M8x1,Straight plug/straight socket,Straight plug/angled socket,Straight plug/straight socket,Straight plug/angled socket
0.5 ... 5 m � For connecting inputs and outputsor for connecting individual valves orsensors
� Pre-assembled at both ends: straightplug with straight or angled socket
� Type of mounting: union nut, threadedconnectorInternet: .../km8
Connecting cables for control systems
Type Electrical connection Cable length Description
Connecting cableSBOA-K
Straight plug/straight socket/straightsocket,Angled plug/straight socket
2 m � For Compact Vision System SBOC-Q,SBOI-Q
� Ethernet diagnostic cable, forintegration in a CPI system or for I/OexpansionInternet: .../sboa-k
Connecting cableKSPC-SECST,KSPC-AIF
15-pin,Plug,Straight socket/angled socket,5-pin/5-pin
1.5 m,5 m,8 m
� For connecting motor controllerSEC-ST to axis controller SPC200
� For connecting motor controllerSPC200 to axis controller SPC-AIFInternet: .../kspc
Connecting cableNEBC
15-pin,15-pin/9-pin,5-pin,5-pin/3-wire,9-pin,Socket,Straight socket/straight socket,M12x1,M9/open end,Angled plug/cable,Straight plug,Sub-D,Sub-D/Sub-D,Square design/angled
0.3 ... 5 m � For I/O interface� For connecting motor controllerCMMS-ST to any controllerInternet: .../nebc
Connecting cableFEC-KBG
RJ11 plug/Sub-D, socket, 15-pin,RJ12 plug/Sub-D, socket, 15-pin
1.2 m,1.8 m
� For connecting electrical terminal CPXto operator unit FEDInternet: .../fec-kbg
Control cableKES
2.5 ... 10 m � For I/O interface for connecting motorcontroller SFC-DC to any controller
� For I/O interface for connecting motorcontroller MTR-DCI to any controllerInternet: .../kes
ProgrammingcablePS1-ZK11
1.5 m � Connecting cable for motor controllerCMMS-STInternet: .../cmms-st
124 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1414
Electrical connection technology >
Connecting cables for fieldbuses
Type Electrical connection Cable length Description
Flat cableKASI
100 m � For AS-interface� 2-wire� Reverse polarity protected� Contact using insulation displacementtechnology
� No need to strip cable and wireinsulation
� 2 different colours: yellow (preferredfor the AS-interface network) andblack (for auxiliary power supply)Internet: .../kasi
Addressing cableKASI-ADR
4-pin/4-pin/2-pin,Straight socket/angled plug/straightsocket
� For AS-interface� For any slaves such as individual valveinterface, Midi/Maxi valve terminalwith AS-interface connection, CP valveterminal
� Reverse polarity protectedInternet: .../kasi-adr
ProgrammingcableKDI
4-pin/9-pin,5-pin/25-pin,9-pin/9-pin,Straight socket/straight socket,Straight socket/straight plug,M12x1/Sub-D,M8x1/Sub-D,Straight plug/straight socket,Sub-D/Sub-D
2.5 ... 5 m � Pre-assembled at both ends� For diagnostic interface� For servo motor MTR-DCIInternet: .../kdi
Connecting cableKVI
Straight plug/straight socket,Angled plug/angled socket
0.25 ... 8 m � For fieldbus connection (CP busvalve terminal type 10 CPV and CPIinstallation system)
� 5-pin round connector� Pre-assembled at both ends� Suitable for use with energy chainsInternet: .../kvi
Connecting cableKV-M12
Angled plug/angled socket 1.5 ... 3.5 m � Plug socket with cable for diagnosticinterface (to electric terminal CPX)
� Pre-assembled at both ends� 5-pin/4-wire� Round plug� Mounting via union nut M12Internet: .../kv-m12
Connecting cables for motors
Type Electrical connection Cable length Description
Encoder cableNEBM
5 ... 15 m � For servo motors EMMS-AS andstepper motors EMMS-ST
� Suitable for use with energy chainsInternet: .../nebm
Motor cableKMTR
2.5 ... 10 m � For motor controllers SFC-DCInternet: .../kmtr
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 125
1414
Electrical connection technology >
Connecting cables for motors
Type Electrical connection Cable length Description
Motor cableKMTRE
5 ... 10 m � Screened cable� Can be used at �40 ... +125 °C� Suitable for use with energy chains� Protection class IP67� For stepper motors MTRE-STInternet: .../kmtre
Power supplycableKPWR
2.5 ... 10 m � For motor units MTR-DCI� For motor controllers SFC-DC forconnecting load and logic supplyInternet: .../kpwr
Connecting cables for valves
Type Electrical connection Cable length Description
Connecting cableNEBV-C1,NEBV-B2,NEBV-Z2,NEBV-H1,NEBV-M8
-/M12x1,15-pin,2-pin,2-pin/5-pin,25-pin,3-pin/5-pin,37-pin,4-pin/2-wire,4-pin/3-pin,4-pin/5-pin,44-pin,8-pin/4-pin,8-pin/4-pin/4-pin,Socket,Socket/plug/plug,Straight socket/straight plug,Angled socket/cable,Angled socket/straight plug,Type BI/A-coded,Type C/A-coded,Cable with plug,M12x1/M12x1,M12x1/M12x1/M12x1,M8x1,M8x1/M8x1,Sub-D,To DIN EN 175301-803/M12x1,Square design MSZC/A-coded
0.5 ... 10 m � Connecting cable for AS-interface, forvalves with solenoid coils ZC (CPE10,CPE14), for valves VUVG,
� Pre-assembled� NEBV-C1, B2, -Z2: Based on standardEN 175301-803, EN 61076-2-101Internet: .../nebv
Plug socket withcableKMYZ-2, KMYZ-3,KMYZ-4, KMYZ-9
2-pin/2-wire,2-pin/2-pin,2-pin/3-pin,Angled socket,Angled socket/cable,Angled socket/straight plug,Angled socket/angled plug,Cable,Square design/M8x1,Square design/open end,Square design/square design,Square design MSZB,Square design MSZC
0.2 ... 10 m � For valve with ZB solenoid coil: MZBH,MOZBH
� For valve with ZC solenoid coil:CPE10-M1BH, CPE14-M1BH, MH2,MH3
� RoHS-compliant� Mounting via central screwInternet: .../kmyz-2
126 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1414
Electrical connection technology >
Connecting cables for valves
Type Electrical connection Cable length Description
Plug socket withcableKMEB-1,KMEB-2, KMEB-3
2-pin,3-pin,4-pin,5-pin,Angled socket,Type C,To DIN EN 175301-803
0.5 ... 10 m � For valve with EB solenoid coil: CPE18,CPE24, MEBH, MOEBH, JMEBH,JMEBDH, JMN2DH
� With PVC or polyurethane cable� Mounting via central screwInternet: .../kmeb-1
Plug socket withcableKME
3-pin,Angled socket,Type C,To DIN EN 175301-803
2.5 ... 10 m � For valve with E solenoid coil: MEH,MOEH, JMEH
� Mounting via central screw� With PVC cable� Temperature range -20 to +80 °CInternet: .../kme
Plug socket withcableKMF
Socket 2.5 ... 10 m � For valve with F solenoid coil: MFH,MOFH, JMFH, JMFDH, NVF3, MUFH
� Mounting via central screw� PVC cable� Temperature range -20 to +80 °CInternet: .../kmf
Plug socket withcableKMV
Socket,Type B
2.5 ... 10 m � For valves with V solenoid coils� Mounting via central screw M3� With PVC cable� Temperature range -20 to +80 °CInternet: .../kmv
Plug socket withcableKMC
Socket,Type A
2.5 ... 10 m � For valve with D solenoid coil: MDH,MODH, JMDH
� For valve with N1 solenoid coil: MN1H,JMN1H, JMN1DH
� PVC cable� Mounting via central screw� Temperature range -20 to +80 °CInternet: .../kmc
Plug socket withcableKMH
2-pin,3-pin,Socket
0.5 ... 5 m � For miniature valve MHA1 and MHP1� For fast-switching valve MHA2 andMHP2
� Mounting via clip� Temperature range -40 to +80 °C� PVC cableInternet: .../kmh
Connecting cableMHJ9-KMH
2-pin/2-pin/4-wire,Straight socket/straight socket/cable
0.5 ... 2.5 m � For MHJ9 valves� With plug sockets KMHInternet: .../mhj9-kmh
Electrical plugbaseMHAP-PI
2-pin,3-pin,Socket
0.5 ... 1 m � Plug base with cable for connectingindividual valve
� Pre-assembled� 2-pin or 3-pin plug socket� Mounting via clipInternet: .../mhap
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 127
1414
Electrical connection technology >
Connecting cables for valves
Type Electrical connection Cable length Description
Connecting cableKMPYE-AIF,KMPYE-5,KMPYE-...
0.3 ... 10 m � Connecting cable for connectingproportional directional control valvesMPYE to the axis interface of axiscontroller SPC200
� Plug socket with cable, screened, forproportional directional control valvesMPYE with 5 m cable
� Connecting cable, screened, forproportional directional control valvesMPYE with max. 10 m cableInternet: .../kmpye
Plug socket withcableKMPPE
2.5 m,5 m
� For proportional pressure regulatorsMPPE and MPPES
� Temperature range -30 to +80 °C� Mounting via union nut M16x0.75� With PVC cableInternet: .../kmppe
Connecting cables for valve terminals
Type Electrical connection Cable length Description
Connecting cableNEBV-S1
-/M12x1,15-pin,2-pin,2-pin/5-pin,25-pin,3-pin/5-pin,37-pin,4-pin/2-wire,4-pin/3-pin,4-pin/5-pin,44-pin,8-pin/4-pin,8-pin/4-pin/4-pin,Socket,Socket/plug/plug,Straight socket/straight plug,Angled socket/cable,Angled socket/straight plug,Type BI/A-coded,Type C/A-coded,Cable with plug,M12x1/M12x1,M12x1/M12x1/M12x1,M8x1,M8x1/M8x1,Sub-D,To DIN EN 175301-803/M12x1,Square design MSZC/A-coded
0.5 ... 10 m � Connecting cable for multi-pin plugconnection
� Pre-assembled� Sub-DInternet: .../nebv-s1
Connecting cableKVIA
Straight plug,Straight plug/straight socket,Straight plug/angled socket
5 ... 10 m � For inputs/outputs (analogueconnections)
� Pre-assembled at both ends� 4-pin/5-pin round plug� Suitable for use with energy chainsInternet: .../kvia
128 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1414
Electrical connection technology >
Connecting cables for valve terminals
Type Electrical connection Cable length Description
Connecting cableVMPA-KMS1,VMPA-KMS2
Cable with plug 2.5 ... 10 m � Plug socket with cable for multi-pinplug connection (to valve terminaltype 32 MPA)
� Pre-assembled at one end� Mounting via 3 screws� PVC or polyurethane cableInternet: .../vmpa-kms
Connecting cableKEA
25-pin,Socket,Sub-D
5 ... 10 m � For multi-pin plug connection� Type of mounting: 2x M3x16 screws� Operating voltage range 250 V AC/DCInternet: .../kea
Connecting cableKMP2, KMP3,KMP4, KMP6
15-pin,25-pin,26-pin,9-pin,Socket,Sub-D
2.5 ... 10 m � Plug socket with cable for multi-pinplug connection
� Pre-assembled� Mounting via union nut, with 2 screwsInternet: .../kmp
Connecting cableKRP
2-pin,Angled socket
2.5 ... 5 m � Plug socket with cable for connectingrelay plates, (valve terminal type 10CPV10 and CPV14)
� Pre-assembled� Mounting via self-tapping centralscrewInternet: .../krp
Connecting cables for sensors
Type Electrical connection Cable length Description
Connecting cableNEBS
2.5 ... 5 m � Connections: Plug socket with squaredesign, open endInternet: .../nebs
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 129
1414
Electrical connection technology >
Universal plug connectors
Type Electrical connection Connection cross section Protection class Description
PlugNECU, NECU-HX
2x20-pin,3-pin,4-pin,5-pin,7/8'' round plug connector,A-coded,AIDA push-pull,Socket,Socket/spring-loadedterminal,Straight socket,Straight socket/screwterminal,M12x1,M12x1 round plugconnector,M8x1,R=2.54,Screw terminal,Straight plug/insulationdisplacement connector,Straight plug,Straight plug/screwterminal,Pre-assembled,Screenable,Square design
0.13 ... 2.5 mm2 IP40,IP65,IP67,IP68
� Power supply socket for fieldbusconnection
� Plug and socket for power supply� Can be assembled with any cablelengths
� NECU-HX: reconnectable M8 and M12round plug connectors with Harax®quick connection technology forlow-voltage applicationsInternet: .../necu
Push-inT-connectorNEDU
4-pin/3-pin,4-pin/4-pin,A-coded/A-coded,M12x1/M12x1,M12x1/M8x1,M8x1/M8x1,Plugs/sockets,To EN 60947-5-2
IP65,IP67
� For fieldbus connection� Branch line for connecting anddisconnecting fieldbus componentsInternet: .../nedu
PlugSEA
3-pin,4-pin,5-pin,Angled socket/screwterminal,Type A,M12x1,M12x1 round plugconnector,M8x1,Straight plug/solderconnection,Straight plug/insulationdisplacement connector,Straight plug/screwterminal
0.08 ... 0.75 mm2 IP65,IP67
� Sensor plug/socket for inputs/outputs� Can be assembled with any cablelengthsInternet: .../sea
Sensor socketSIE-GD, SIE-WD
4-pin,Straight socket,Angled socket,M12x1
0.25 ... 0.75 mm2 IP67 � For customised fabrication of cables� Pin adapter for fieldbus connection� With screw terminals� Straight or angled designInternet: .../sie-gd
130 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1414
Electrical connection technology >
Plug connectors for control systems
Type Electrical connection Connection cross section Protection class Description
PlugNECC
11-pin,Spring-loaded terminal,Plug
0.2 ... 2.5 mm2 � Encoder plug for motor controllersCMMS-ST, CMMS-AS
� Plug for multi-axis control systemsCMXR for interface housing CAMI-C,11-pin
� Plug for multi-axis control systemsCMXR and for modular controllersCECX for peripheral modules
� 2-pin, 4-pin, 6-pin, 8-pin, 11-pin,18-pinInternet: .../necc
PlugPS1-SAC, PS1-ZC
10-pin/10-pin,10-pin/30-pin,Socket/terminal strip
0.08 ... 0.75 mm2 � For power supply� Cable connection using clampingtechnology
� Individually or as a setInternet: .../ps1
Plug assortmentNEKM
� For motor controllers CMMP-AS,CMMS-ST
� Comprising plug for power supply andplug for motor connectionInternet: .../nekm
PlugFBS-RJ45
5-pin,Type A,M12x1,Straight plug/screwterminal
0.75 mm2 IP40,IP65,IP67,In assembled condition,To IEC 60529
� Ethernet plug with 8-pin RJ45connection
� Permissible cable diameter: 4 ... 8 mm� Reverse polarity protected� High transmission quality� Detachable connectionInternet: .../fbs-rj
Plug connectors for fieldbuses
Type Electrical connection Connection cross section Protection class Description
T-adapterFB-TA
5-pin,5-pin/5-pin,M12x1/M12x1,M12x1/M8x1,Plug/socket,Plugs/sockets
IP67 � For fieldbus connection (for valveterminal type 10 CPV and CPinstallation system)
� Branch line for connecting anddisconnecting fieldbus components
� With open cable end or with 5-pinpush-in connectorInternet: .../fb-ta
Plug, plug socketFBS, FBSD
4-pin,5-pin,5-pin/5-pin,Straight socket/screwterminal,Angled socket/screwterminal,Type A,M12x1,Straight plug/screwterminal
0.75 mm2,0.2 ... 2.5 mm2
IP20,IP40,IP65,IP67,In assembled condition,To IEC 60529
� For fieldbus connection� Straight and angled design� Can be assembled with any cablelengthsInternet: .../fbs
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 131
1414
Electrical connection technology >
Plug connectors for fieldbuses
Type Electrical connection Connection cross section Protection class Description
Bus connectionFBSD-KL
5-pin/5-pin,Angled socket/screwterminal
0.2 ... 2.5 mm2 IP20 � Angled socket, 5-pin; screw terminal,5-pinInternet: .../fbsd-kl
PlugFBS-SUB-9-WS
5-pin,Type A,M12x1,Straight plug/screwterminal
0.75 mm2 IP40,In assembled condition,To IEC 60529
� Plug connector for bus connectionCAN bus and Profibus
� Cable connection 2x horizontal or 2xvertical
� Printed circuit terminal block withscrew connectorInternet: .../fbs-sub-9-ws
PlugFBS-SUB
IP65,IP67,In assembled condition,To IEC 60529
� Fieldbus plug with 9-pin Sub-Dconnection
� Variants for Profibus DP, Interbusnodes CPX and CPV, CC-Link CPX andCPV, CPX-FEC
� Position of DIL switches can be readexternally
� Easy mountingInternet: .../fbs-sub
Cable distributorASI-KVT
1.5 mm2 IP65,In assembled condition,To IEC 60529
� Flat cable distributor for branchingor for reconnecting AS-interface flatcables
� Reverse polarity protectedInternet: .../asi-kvt
Cable socketASI-SD
2-pin,4-pin,5-pin,Straight socket,Straight socket/insulationpiercing connector,Screw terminal
0.75 ... 1.5 mm2 IP65,IP67
� For AS-interface� Flat cable socket for connectingAS-interface stations to theAS-interface bus system
� M12 connection� Reverse polarity protected� Detachable connectionInternet: .../asi-sd
132 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1414
Electrical connection technology >
Plug connectors for valves
Type Electrical connection Connection cross section Protection class Description
Plug socketMSSD
3-pin,4-pin,Socket,Angled socket,Type A,Type B,Type C,To DIN EN 175301-803,to DIN EN 61984,Round design,Square design,Square design MSC,Square design MSE,Square design MSEB,Square design MSF,Square design MSN1,Square design MSN2,Square design MSV
0.75 ... 1.5 mm2 IP40,IP65,IP67,In assembled condition,To IEC 60529
� For valves with F, D, N1, V, E, EB, N2, Y,Z, ZB, ZC, MD-2, MH-2 solenoid coils
� For connecting individual valves (forvalve terminal type 14)
� Cable connection using clampingscrews, insulation displacementtechnology or push-in connector
� With or without LEDInternet: .../mssd
Soldering basePCBC
2-pin,3-pin
IP40 � For mounting miniature valves MHA1and MHP1 on a PCB with plugconnection underneath (-PI)
� For valve terminal type 82 CPA-SC forplug-in connectionInternet: .../pcbc
Multi-pin plugsocketNECA
9-pin/9-pin,Sub-D/screw terminal
0.34 ... 1 mm2 IP65,To IEC 60529
� For soft-start and exhaust valvesMS6-SV, MS series
� Electrical connection via Sub-D 9-pin,screw terminal 9-pinInternet: .../ms6-sv
Angled plugsocketMPPE-3-B
8-pin,Angled socket,Solderable
0.75 mm2 IP67 � For proportional pressure regulatorsMPPE and MPPES
� Mounting via union nutInternet: .../mppe-3-b
Illuminating sealMF-LD, MC-LD,MV-LD, ME-LD,MEB-LD
Type A,Type B,Type C,To DIN EN 175301-803,Square design MSC,Square design MSE,Square design MSEB,Square design MSF,Square design MSV
IP65 � For mounting between the plug socketand solenoid coil
� The seal is illuminated yellow whenthe power is switched on
� For F, D, N1, V, E, EB solenoid coilsInternet: .../mc-ld
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 133
1414
Electrical connection technology >
Plug connectors for valve terminals
Type Electrical connection Connection cross section Protection class Description
Power supplysocketNTSD
4-pin,5-pin,Straight socket,Angled socket,Screw terminal,Straight plug/screwterminal
0.75 ... 2.5 mm2 IP67 � Straight and angled design� For power supply� Can be assembled with any cablelengthsInternet: .../ntsd
Fieldbus adapterFBA-CO, FBA-PB
9-pin/5-pin,Straight socket/straightplug,Straight socket/plug andsocket,Sub-D/-,Sub-D/M12x1
IP67 � 9-pin Sub-D plug to 5-pin roundplug/M12 socketInternet: .../fba
Bus connectionFBA-1, FBA-2
9-pin/5-pin,Straight socket/straightplug,Straight socket/plug andsocket,Sub-D/-,Sub-D/M12x1
IP40,IP65,IP67,To IEC 60529
� Can be assembled with any cablelengthsInternet: .../fba-1
Cover capISK
� For sealing unused ports/openings� Thread M8, M12Internet: .../isk
Plug socket, plugSD-SUB
25-pin,Plug,Sub-D
IP65 � Plug socket for multi-pin plugconnection
� Plug for inputs/outputs� Can be assembled with any cablelengthsInternet: .../sd-sub
Multi-pin plugsocketIMP1
25-pin,40-pin,72-pin,Socket
0.75 ... 1.75 mm2 IP65 � For multi-pin cable connection� Can be assembled with any cablelengthsInternet: .../imp1
134 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1414
Electrical connection technology >
Plug connectors for sensors
Type Electrical connection Connection cross section Protection class Description
Angled plugsocketPEV-WD
4-pin,Angled socket
IP65 � For pressure switch PEV� 15 ... 30, 180 V DC, 230 V AC� Angled design� Available with LED displayInternet: .../pev*wd
Angled plugsocketSD-4-WD
25-pin,Plug,Sub-D
IP65,To IEC 60529
� For swivel module DSMI� Angled designInternet: .../sd-4-wd
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 135
1414
Control technology and software >
Software toolCoDeSysCoDeSys makes yourlife easier with simplecommissioning, fastprogramming andparametrisation �standardised programmingof embedded devices to IEC61131-3
Advantages� Hardware-neutral software platformfor quick and easy configuration,programming and commissioning ofpneumatic and electric automationsolutions
� Extensive module libraries for single ormulti-axis positioning motions
� The IEC 61131-3 standard means thatCoDeSys is flexible and open for all typesof control tasks
� Modular: offline and online functions,as well as components for hardwareconfiguration and visualisation
� User-friendly IEC functional moduleextension
� Re-use of existing application partsThe CoDeSys parametrisation software canbe found on the website under Support inthe Support and Downloads area. EnterCoDeSys as a search term here to retrieve it.
Controllers
Type Operating voltage CPU dataType of fieldbusinterface
Ethernet, connectorplug Description
ControllerCECX-M1
19.2 - 30 VDC,24 VDC +25%/-15%
64 MB DRAM,Processor 400 MHz
CAN bus,Profibus masterDP-V1,Profibus slaveDP-V0,Profibus slaveDP-V1
8-pin,Socket,RJ45
� Motion controller with CoDeSys andSoftMotion
� Programming to standard IEC 61131-3� Three plug-in slots for optionalmodulesInternet: .../cecx
ControllerCECX-C1
19.2 - 30 VDC,24 VDC +25%/-15%
64 MB DRAM,Processor 400 MHz
CAN bus,Profibus masterDP-V1,Profibus slaveDP-V0,Profibus slaveDP-V1
8-pin,Socket,RJ45
� Modular master controller withCoDeSys
� Programming to standard IEC 61131-3� Three plug-in slots for optionalmodulesInternet: .../cecx
ControllerFED-CEC
32-bit RISCprocessor, 24 MHz,Watchdog
CAN RJ45 � Plug-in card with processor module� For fitting into operator units FD� Fieldbus interfaces CANopen� CoDeSys programming softwareprovided by FestoInternet: .../fed-cec
136 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1515
Control technology and software >
Operator units, text-based
Type Display Display sizeRecipememory
Ethernetinterface
Number ofuser LEDs
Number offunctionkeys Description
Operator unitFED-40, FED-50,FED-60, FED-90
Mono-chromeLCD,with back-lighting
4 x 20characters
16 KB Optional, 10MBd
5... 13 4 ... 12 � Straightforward designing ofhuman-machine dialogues
� Semi-graphical display of processvalues makes them easier to read
� 4-line text display and operatingbuttons
� Serial interface� Recipe handling� Password protectionInternet: .../fed
Operator units, with touchscreen
Type Display Display size Display resolution Ethernet interface Description
Operator unitFED-301,FED-400,FED-501,FED-550,FED-700,FED-1000,FED-2000,FED-5000
Monochrome LCD,Colour TFT
10.4",12.1",15",3.8",4.3",5.6",5.7",7.5"
1/4 VGA, 320x240pixels,SVGA, 800x600pixels,VGA, 640x480pixels,XGA, 1024x768pixels
100 MBd,2nd Ethernetinterface, optional,10 MBd,RJ45 10/100 MBd,Optional, 10 MBd
� Graphics-capable for maximumflexibility when displaying processesand data
� No programming effort in the PLCprogram
� Convenient FED Designer WYSIWYGdesign tool
� Shorter project planning thanks tore-usable objects
� Trend display� Program sequences display� Can be connected to all FEC® units� Extremely sturdy thanks to metalhousingInternet: .../fed
Software
Type Description
DiagnosticmoduleGFDM
� Diagnostic system for the continuousmonitoring of the pressure, flow andcycle consumption of a pneumaticsystem
� The system includes sensors (a flowsensor and a pressure sensor) forrecording the measured values, acontroller for evaluation and one oftwo visualisation options
� Limit monitoring and informationconcerning trends
� Automatic reference data acquisition(teach-in)
� Monitoring of up to 16 differentprocess sequences on one systemInternet: .../gfdm
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 137
1515
Control technology and software >
Software
Type Description
Software(FluidDraw)GSWF
� Quick and easy creation of pneumaticcircuit diagrams
� Comprehensive pneumatics symbollibrary
� Easy, user-friendly operator guidance� Interface to Festo products (catalogue,online shop)Internet: .../gswf
SoftwareGSWC
� Circuit diagram templates for modularelectrical terminal CPX
� CPX macros for circuit diagram designin EPLANInternet: .../gswc
138 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1515
Other pneumatic devices >
Reservoirs
Type VolumeInformation on airreservoir materials Conforms to
Condensate drainconnection Description
Air reservoirVZS
20 l Steel,Painted
DIN EN 286-1 G3/8 � Compensation of pressurefluctuations
� Provision of large quantities ofcompressed air for supplying fastpulsing drives
� Volume up to 20 l� With condensate drainInternet: .../vzs
Air reservoirCRVZS
0.1 l,0.4 l,0.75 l,10 l,2 l,20 l,5 l
High-alloy stainlesssteel
AD 2000 G3/8 � Corrosion-resistant� Volume up to 20 l� Available with condensate drain� The reservoirs can be used tocompensate pressure fluctuations,and act as accumulators in the eventof sudden air consumption
� Provision of large quantities ofcompressed air for supplying fastpulsing drives
� Designs in accordance with EUPressure Equipment DirectiveInternet: .../crvzs
Silencers
TypeInformation on silencerinsert materials Pneumatic connection Noise level Description
SilencerU
Bronze,PE
G1,G1/2,G1/4,G1/8,G3/4,G3/8,M3,M5,PK-3,PK-4
65 ... 84 dB(A) � Compact design, plastic or die-castzinc
� Barbed fitting or threaded connection� RoHS-compliant designsInternet: .../u
SilencerUC
PE G1/4,G1/8,M5,M7,QS-10,QS-3,QS-4,QS-6,QS-8
58 ... 68 dB(A) � Design with push-in sleeve for push-infitting QS or threaded connection forsolenoid valves CPE
� Plastic designInternet: .../uc
SilencerUO
PE G1/4,G1/8,M7
� Special minimal resistance silencer� For vacuum generator VN� Facilitates trouble-free operationInternet: .../uo
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 139
1616
Other pneumatic devices >
Silencers
TypeInformation on silencerinsert materials Pneumatic connection Noise level Description
SilencerUOS-1
PE G1 � For soft-start and exhaust valvesMS6-SV, MS series
� Mounted using male threadsInternet: .../uos-1
SilencerUOM, UOMS
PU foam G1/4,G3/8
� Silencer and silencer extension� For vacuum generators� Special minimal resistance silencer� Facilitates trouble-free operation ofthe vacuum generator
� Silencer extension for extending thesilencer for further noise reductionInternet: .../uom
Air guns
Type Exhaust function Pneumatic connection Housing materials Description
Lowconsumption airgunLSP
Metered blowing Female thread G1/4 Wrought aluminium alloy,PA6 reinforced
� Precise, infinitely variable, leveroperated flow metering
� Interchangeable nozzles� Pneumatic connection via femalethreadInternet: .../lsp
140 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1616
Ready-to-install solutions >
Control cabinetsFactory automation� Control cabinets madeto measure
� Individually configured� Adapted to requirementsin industrial automation
� Design and sizingincluded
Technical data� Simple to complex control cabinetdesigns� Pneumatic� Electric� Combined
� Application-specific combination ofcomponents
� Use of the latest innovations andtechnologies
� 100% tested, with test certificate� Ready-to-install� Complete documentation� Design conforms to:
� EN 60204-1� ATEX zone 1 and 21 (pneumatic only),ATEX zone 2 and 22 (electric andelectro-pneumatic)
� UL-508A� Implementation of safety functions� Different bus technologies, including:
� PROFIBUS� CANopen� DeviceNet
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 141
1717
Ready-to-install solutions >
Control cabinetsProcess automation� Control cabinets madeto measure
� Individually configured� Adapted to requirementsin process automation
� Design and sizingincluded
Technical data� Simple to complex control cabinetdesigns� Pneumatic� Electric� Combined
� Application-specific combination ofcomponents
� Different operating voltages possible� Use of the latest innovations andtechnologies
� 100% tested, with test certificate� Ready-to-install� Complete documentation� Design conforms to:
� EN 60204-1� ATEX zone 1 and 21 (pneumatic only),ATEX zone 2 and 22 (electric andelectro-pneumatic)
� UL-508A� Implementation of safety functions� Wide range of bus technologies� Compliance with special cleanliness andhygiene requirements
� Special materials, e.g. stainless steel, foruse in virtually all ambient conditions
� Protected against the entry of liquids andforeign matter, e.g. dust
� Installation of heating or coolingelements possible in areas of applicationwith extreme temperature fluctuations
� Intrinsically safe valve terminaltechnology
� Replacement of individual terminalvalves during operation (hot-swap)
� Inspections without opening the cabinetusing inspection window
� Control elements on the outside� Safe thanks to key lock system on theservice unit: to switch off, all employeesresponsible must remove their lock
142 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1717
Ready-to-install solutions >
Control cabinets
Control cabinets forcontrollers� Made-to-measurecontrol cabinets forcontrolling handlingsystems
� Software package forthird-party devicesincluded
� Individually configurable� Adapted to requirementsfor handling solutions
48
Technical data� Simple to complex control cabinetdesigns� Pneumatic� Electric� Combined
� 1 ... 31 axes� Application-specific combination ofcomponents
� Use of the latest innovations andtechnologies
� 100% tested, with test certificate� Ready-to-install� Complete documentation� Design conforms to:
� EN 60204-1� ATEX zone 1 and 21 (pneumatic only),ATEX zone 2 and 22 (electric andelectro-pneumatic)
� UL-508A� Implementation of safety functions� Wide range of bus technologies
Mounting plates and assembliesMounting plates� Machine-specificpreassembly ofpneumatic and electricalcomponents on supportplate
� Tubing and wiringincluded
� Defined interfaces forsimple installationdirectly in the system
Technical data� Customised support plate shape� For a wide range of industrial applications� Support plate available in differentmaterials, e.g. sheet steel, stainless steeletc.
� Application-specific combination ofcomponents
� Fully assembled, connected and wired� Defined interfaces� Use of the latest innovations andtechnologies
� Ready-to-install: All steps fromengineering through to assembly andright up to quality inspection areperformed by Festo specialists.
� 100% tested, with test certificate� Complete documentation� Design conforms to:
� EN 60204-1� ATEX zone 1 and 21 (pneumatic only),ATEX zone 2 and 22 (electric andelectro-pneumatic)
� UL-508A� Implementation of safety functions
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 143
1717
Ready-to-install solutions >
Mounting plates and assemblies
Sub-assemblies� Pneumatic andelectrical componentspreassembled to createa function unit
� Can be combined fromaround 30,000 cataloguecomponents
� Connections included� For integration inmachines
Technical data� Combination of various pneumaticand/or electrical components to createa single unit
� For a wide range of industrial applications� Application-specific combination ofcomponents
� Optional accessories mounted onsub-assembly
� Use of the latest innovations andtechnologies
� Ready-to-install: all steps fromengineering through to assembly andright up to quality inspection areperformed by Festo specialists.
� 100% tested, with test certificate� Complete documentation� Design conforms to:
� EN 60204-1� ATEX zone 1 and 21 (pneumatic only),ATEX zone 2 and 22 (electric andelectro-pneumatic)
� UL-508A� Implementation of safety functions
Integrated solutionsManifold duct plates� Ideal for a largenumber of pneumaticconnections in anextremely compactspace
� No tubing� Compact� Easy to service� Not subject tomalfunction
Technical data� Shape of manifold duct plate freelyselectable
� Combination of over 30,000 cataloguecomponents, e.g. valves, regulators, filters,sensors etc.
� High connection density of components� No waste� Variable positioning of mechanical,pneumatic and electrical interfaces
� Integration of customised components� Compact� Sturdy and not subject to malfunction� Sealed and protected unit� Easy to service� Available with protective cover� 100% tested� Ready-to-install� Complete documentation� Implementation of safety functions
144 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1717
Ready-to-install solutions >
Integrated solutions
Cartridge solutions� Integration of variouspneumatic functionsin one component
� No need for singlehousings
� Ideal for applicationsthat require a highlycompact design
Technical data� Space-saving thanks to extremely compactdesign
� Pneumatic functions integrated in a singlecompact housing, e.g.:� Directional control valves� Flow control valves� Non-return valves� Vacuum generators� Pressure regulators� Pneumatic logic functions
� Housing available in different materials� No tubing required� Minimal cabling required� Significant design freedom� Variable integration options on and withinthe machine
� Sturdy design thanks to protected installedparts and smooth surfaces
� 100% tested� Ready-to-install� Complete documentation
Sheet-metalconstructions andspecial housings� Reduced weightthanks to optimalmaterial utilisationwith sheet-metalconstruction
� Protection againstenvironmentalinfluences andunauthorised access
� Ideally combinedas a control cabinetdirectly in the system
Technical data� Sheet-metal constructions
� Customised shape and size� Reduced weight and number ofassembly parts
� Special housing� Customised shape (flat, curved,rectangular etc.)
� Customised dimensions� Different materials (metal, aluminium,plastic etc.)
� Compact, space-saving format� Protection against environmentalinfluences and unauthorised access
� In combination� Alternative to conventional controlcabinets
� Variable integration options on andwithin the machine
� Short tubing and cable lengths� Attractive design
Functional blocks� Compressed airsupply for pneumaticcomponents viadrilled ducts
� Ideal for smallnumber of pneumaticcomponents andvariable connectionoptions
� Compact and easy toservice
Technical data� No tubing required thanks to drilled ducts� Housing available in different materials:
� Aluminium� Brass� Steel� POM� PEEK� PA� etc.
� Customised design of the pneumaticinterfaces for the system
� Ideal for a small number of components andvariable connection options
� Extremely economical, even for smallquantities
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 145
1717
Ready-to-install solutions >
Integrated solutions
Profile solutions� Extruded profiles incombination withvalves as a valveterminal
� For the distribution ofcompressed air in themachine concept
� Customised profilecross sectionsavailable
Technical data� Profiles in customised cross sections andlengths
� Integrated ducts for straight-line routing ofthe compressed air
� Common air supply for multiple valves orvalve terminals via a single duct
� Combination of exhaust air and supply airwithout tubing, even over long distances
� Supply of compressed air at differentlocations
� No tubing required� Significantly reduced cabling� Modular structure easy to achieve� Optional: profile as mechanical mountingfor other components or as a supportingpart of the machine frame
146 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1717
Services >
Operating phaseMaintenance� Preventive and correctivemaintenance
� Directly on your system� For high machineavailability and rapidassistance should theworst happen
ServicesImplementation of the following preventivemaintenance measures to DIN 31051:
Inspections� Checking for damage and wearcharacteristics
� Checking of mechanical, pneumatic andelectrical connections and connectors
� Checking of lubrication� Checking of compressed air preparation� Carrying out of component-specificinspections
Maintenance� Lubrication/relubrication of guides� Tightening of connectors� Replacement of air filters� Replacement of silencers� Carrying out of component-specificpreventive maintenance tasks
Repair� Troubleshooting� Solution finding� Error elimination� Rectification of leakages� Replacement or repair of components
Repair service� Send high-qualitycomponents andassemblies to Festofor repair
� Extended service life� Reduced costs
Services� Inspection� Profitability analysis� Repair or replacement of faultycomponents or wearing parts
� Leakage testing� Function checkPlease send the faulty component and adetailed error description to your Festonational company.Detailed spare parts lists can be found onthe Festo Internet site.
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 147
1818
Services >
Energy Saving ServicesCompressed air productionenergy analysis� Energy Saving Services �the service package forenergy efficiency.
� Identification andoptimum utilisationof potential savings forcompressed air
� Save up to 60% oncompressed air costs
� Energy saving beginswith the compressor
Services� Measurement of compressor operatingtimes as well as load/idling times
� Current consumption measurement� Flow measurement/consumptionmeasurement
� Pressure measurement (level andbandwidth)
� Estimation of leakage volume� Comparison of energy consumption andsupplied compressed air volume
Compressed airconsumption analysis� Determination ofexact compressed airconsumption
� Optimal configuration ofcompressed air supply
� No pressure drop due toundersupply
� No unnecessary energycosts due to oversupply
Services� Installation and removal of the measuringequipment with standard components(fittings, tubing etc.)
� Measurement of flow rate, consumptionand pressure with machine running andwhen idle
� Determination and analysis of differentcharacteristics� Consumption per machine cycle� Average consumption per minute� Average pressure� Max./min. pressure� Max./min. rate of air flow
� Documentation of measurement resultsincluding graphical representationof measurement results, optionallyavailable as PDF file or colour printout
� 3 hours on-site service (additional efforton a time and material basis)
Compressed air qualityanalysis� Optimisation ofcompressed air quality
� Increased service life ofcomponents
� Reduced maintenancecosts
Services� Inspection of decentralised airpreparation at point of usage
� Measurement of residual oil content� Measurement of pressure dew point� Analysis of measurement results andrecommendation of improvementmeasures (if applicable)
� Documentation of all measurementresults
� 3 hours on-site service (max. 3measurements; additional effort on atime and material basis)
148 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
1818
Services >
Energy Saving Services
Leakage detection� Detection andrectification of leakagesin production plants
� Immediate energy andoperating cost savings
Services� Detection of compressed air leakagesusing highly sensitive ultrasounddetectors during operation
� Checking of the complete compressedair system from the compressor to thepneumatic application
� Classification of the leakages accordingto size and cost
� Documentation of faulty components aswell as of the type and cause of fault
� Leakage report� Recommended measures� Spare parts required� Estimation of repair time� Prioritisation of measures� Assessment as to whether repair canbe carried out while machine is inoperation
� Information on optimisation options� Documentation of measures carried out
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 149
1818
Wide range of industry segments? One competent partner.
Innovative solutions for factory andprocess automationWhen it comes to automation, Festois right at home � whether it�s factoryautomation involving discontinuousprocesses or the various fields of
application in process automationinvolving batch and continuousprocesses.Industry-specific and industry-wideexpertise guarantees the right
products and services for our mutualsuccess.From improving energy efficiencyto increasing machine availability� Festo has its finger on the pulse
and will support you in meeting anychallenges you face
Your goal: Optimising processcosts, ensuring productivity
Our solution: Partner throughoutthe entire production process
Your goal: Productivity andeconomy
Our solution: Understanding thechallenges in your segment
Your goal: Optimum solutions inthe shortest possible time
Our solution: Combining knowledgeof applications and technologies
Your goal: Competitive edge thanksto innovation and differentiation
Our solution: Meeting challengeswith technology and innovation
150 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
Partner to the food and beverage industry
Festo � partner throughout theentire production process:� From continuous processesthrough food and splash zonesright up to end-of-line packaging
� Collaborative engineering� Creating synergies � everythingfrom a single source
Solutions for applications withdemanding requirements
� Preventing biologicalcontamination: Resistantmaterials and easy-to-cleandesign
� Safe for use in the food sector:Declarations of conformity withFDA, NSF-H1, design approval(1935/2004)
� Preventing physical hazards:Corrosion-resistant materials
� Operability after cleaning:Unlubricated operation
Clean Design drives and sensors forsafe food production
� Easy-to-clean and resistantdesign, seals and grease suitablefor foodstuffs (FDA, NSF-H1)
� Self-adjusting end-positioncushioning system PPS� Minimal vibrations thanks tooptimum cushioning
� Minimal installation timesthanks to self-adjustment
� Easy to clean: No adjustingscrew
� Modular sealing system for everyrequirement
Valve solutions: Standard orcustomised
� Maximum safety thanks to ourcomponents:� Clean Design� Protection to IP65 and IP67� Corrosion-resistant
� Cost-effectiveness in assemblyand operation:� Reduced installation costs� Reduced energy consumptionthanks to decentralisedinstallation concept
� Reduced cleaning time� Condition monitoring anddiagnostics:� Downtime preventionincreased by up to 35%and downtime is shorter
� Faster identification of faults
Tubing/threaded fittingcombinations for every application:
� Resistant to heat� Resistant to cleaning agents andmedia
Meeting challenges withtechnology and innovation� Optimised to your requirements �our innovative products
� Complete solution from a singlesource � application-specificsystems
� Added value for your processes� continuous improvement ofservices from engineering tooperation
Which of our innovations can giveyou that competitive edge?
Talk to our specialists.
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 151
Partners in water technology
Festo � your partner in watertechnologyAdded value in process automationfor plant operators, engineeringfirms and system integrators
Your goal: Optimising processcosts, reducing complexity andincreasing process reliability.
Our solution: Partner throughoutthe entire project and value creationphases of water and sewagetreatment plants
Festo offers tailored automationsolutions. Our solutions areeconomical, reliable and robust.What�s more, you get everythingfrom a single source �from the drive technology right upto field level.Working together to developintelligent automation � fromconceptual design to smoothoperation.
Understanding the challenges inwater technology
Special challenges demand specialsolutions. We work with ourcustomers to develop efficientand reliable applications that aredesigned to meet the specificrequirements of each of theindividual processes involved inwater treatment, including:� Complete, decentralisedautomation systems for filtration,ultrafiltration and reverse osmosis.
� Explosion-proof, ideal forfermentation tanks.
Solution competence:
Very close coordination with theplant operator and the planningoffice with regard to automatedprocesses in the conceptual designand planning phase.Design of the compressedair network as well as of theconsumption metering Definition ofplant standards for the pneumaticactuator and valve technology
Whether your project involvesrenovation, modernisation,expansion, integration into anexisting systemor newdevelopment,reliable technology and economylie at the heart of every decision.The Festo automation concept
takes these factors into account byoptimising process costs, reducingcomplexity and increasing reliability.
Talk to our specialists.
152 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
Partner to the biotechnology/pharmaceuticals industries
Festo � your partner in thebiotechnology/pharmaceuticalsindustries for the entire automationprocess chainWhether your production process isfocussed on� Production of APIs� Precision chemistry� R&D� Highly sterile filling processes
Your goal: Optimising processcosts, increasing productivity andflexibility.
Our solution: Reduction of totalcosts
The best guarantee for safe,reliable and risk-free production areproven technologies combined witheffective control concepts.Regardless of whether you requirehighly sterile filling processesin secondary production or theproduction of APIs or precisionchemistry in primary production,
Festo products and services willincrease your productivity.
Understanding the challenges inthe biotechnology/pharmaceuticalsindustriesWe work with our customers todevelop customised solutions thatare designed to meet the specificrequirements of the industry,including:� Consistently reducing the periodof time from the system conceptto the start of production
Saving time saves money andextends productive use of the patentperiod.
Solution competence:Festo has the answer with products,modules and systems for theimplementation of modular andscalable system concepts.Our industry specialists will supportyou in handling large projects,with the development of designproposals, for example.Whether your project involvesmodernisation, expansion of anexisting systemor newdevelopment,reliable technology and economy lieat the heart of every decision.
Talk to our specialists.
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 153
Partner to the electronics and light assembly industries
Festo will guide you throughthe entire process chain for theelectronics and light assemblyindustries� from wafer production at the frontend to finished chips at the backend
� with quality testing and assemblyof the finished products
� in the area of small partsassembly, in both the electronicand non-electronic sector
In summary: Festo will support youin all areas where space is tight andminiaturised automation solutionsare needed.
Your goal: Competitive edgethanks to innovation and increasedproductivity
Our solution: Automation partnerthroughout the entire productionprocess.
We will guide you through yourentire production process from thefront end to final assembly. Whetheryou produce electronic or purelymechanical products � Festo canoffer automation solutions that aretailored to your requirements.
Understanding the challenges
The electronics and light assemblyindustries are characterised by highcycle rates, extreme cost pressure,fast format change and increasinglysmaller and more efficient machines.In summary: Making miniaturisationand performance a big priority.
Solutions optimised to yourrequirements.
Festo responds to these specificchallenges with an optimisedproduct and solution portfolio:� With weight-optimised, compactdesign
� For fast cycle times� For precise movements� For clean room applications� Miniaturised with� function integration included
We will work with you to find theideal solution for your application,for example:� Valves for the control of gas boxes� Grippers and handling systems forholding electronic chips
� Miniaturised handling systems forassembly
� Testing and quality checkingsystems for final assembly
Our specialists will be happy toassist you. Talk to us.
154 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
Partner to the solar and flat-screen industries
Festo � your partner in photovoltaicsfor the entire automation processchainWhether your production is focussedon� Producing wafers or thin-film cells� Manufacturing cells or modules� "Inline" or "batch" production
Your goal: Optimising processcosts, ensuring productivity
Our solution: Partner throughoutthe entire production process
Festo optimises the automationsolutions to your requirementsso that they integrate into yourproduction as seamlessly aspossible. Tell us what you need. Andwe'll develop an individual solutionfor you.
Understanding the challenges inthe photovoltaics industry
Special challenges demand specialsolutions. We work with ourcustomers to develop customisedsolutions that are designed to meetthe specific requirements of theindustry, including:� Low-contact grippers based on theBernoulli principle
� Air bearings for gentle substratetransport
� Or intelligent pilot valves for gasbox control.
Solution competence: More thanjust products
Festo offers services for the entire lifecycle of complete system solutions.These range from consulting andengineering complete handlingsolutions through commissioningthe ready-to-install systems to anextensive after sales service. Thesego hand-in-handwith a fast return oninvestment, maximum productivityand increased process reliability �a package of benefits that pay off.The right hardware is available from
the multi-axis modular system withno restrictions and also with nointerface problems, even with verycomplex handling solutions:� Simple pick and place handlingsolutions
� Linear gantries� Three-dimensional gantries� The cream of the crop: Optimisedhigh-speed handling systems
Talk to our specialists.
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 155
Partner to the automotive industry and its suppliers
Festo � partner throughout theentire production process:� Understanding the processes� from the press shop throughto engine and transmissionproduction
� Developing solutions �collaborative engineering
� Creating synergies � everythingfrom a single source
Your goal: Optimising processcosts, ensuring productivity
Our solution: Partner throughoutthe entire production process
Your requirements define thesolution. We will provide supportnot just in relation to componentsand pneumatic and electricalsubsystems, but for all phasesof the value added chain fromplanning right through to production� and beyond, with our After SalesServices, for example.
Understanding the challenges
With over 50 years of experiencein standard components andapplication-optimised automationtechnology, vehicle manufacturersand suppliers can rely on Festo. Nomatter where in the world you areplanning to base your production,Festo will be there for you withshort communication channels,rapid availability of componentsand prompt assistance when youurgently need it.� Competent � sales andapplications experts (Key AccountManagement)
� Fast � worldwide networking ofapplications knowledge
� Tailor-made � customer integrationin R&D (innovative products basedon ISO standards)
Competitive edge thanks toinnovation and differentiation
� Optimised to your requirements �our innovative products (e.g. CPXterminal in metal design)
� Complete solution from a singlesource � application-specificsystems (e.g. drive concepts forwelding tongs)
� Added value for your processes �continuous improvement ofservices from engineering tooperation (e.g. Energy Saving)
Catalogues and release lists:
For the convenience of suppliersand manufacturers in theautomotive industry, Festo producesmanufacturer-specific cataloguesand factory and project-specificrelease lists.
Talk to our specialists.
156 è Internet: www.festo.com/catalogue/... Product overview � Subject to change � 2011/03
Festo � specialist for mobile automation
Festo � your partner in theautomotive, commercial vehicle andrail vehicle industries
One strong partner. Our team:Around 14,600 employeesworldwide.
Our mission:Sustainable management andlong-term creation of value forour customers, our company, ouremployees and our partners.
Our motto:Install it and forget it.
We create solutions.
Our advantages � your competitiveedge:
� Price-sensitive, functionalcomponents and systems
� High production, product andservice quality
� Extended temperature ranges� Enhanced vibration and shockresistance
� High level of reliability with respectto service life and switching cyclerate
� High resistance to contaminationand corrosion
� Structures aligned with theautomotive process to VDA 6.4,ISO 9001, ISO 14001, ISO TS16949
Long life built in: Automation incommercial vehicles.
Everything from a single source.
Innovative, flexible and reliablesolutions. From individualcomponents to ready-to-installsystems. New products developedspecifically for use in vehicles �sturdy, flexible and precise.
Decades of experience in thedevelopment and implementation ofcustomised systems in commercial
vehicles, buses and coaches, railvehicles and agricultural machinery.
For maximum safety, reliability andconvenience. Always the optimumfunctionality at the best price.Combined with service packages foreven greater economy.
Talk to our specialists.
2011/03 � Subject to change � Product overview è Internet: www.festo.com/catalogue/... 157