Date post: | 11-Mar-2018 |
Category: |
Documents |
Upload: | truongcong |
View: | 219 times |
Download: | 4 times |
is the Ideal Posterior Replacement
BruxZir Solid Zirconia is a monolithic zirconia for crowns, bridges, inlays, or onlays. It is designed and milled usingCAD/CAM technology. Change from PFM posteriors to BruxZir, and realize better contacts, better occlusion, better fits,and even better shades. Change your life, change your practice, and change all of your posteriors to BruxZir.
• Virtually unbreakable and chip-proof (up to 1510 MPa.)
• Ideal for patients who have destroyed natural teeth or previous dental restorations
• We have perfected BruxZir to virtually no chairside adjustments
BruxZir is kinder to opposing dentition thanporcelain, yet almost 4 times stronger
than monolithic e.max.
BruxZir only $99 Ugly PFM Expensive Gold Crown
...and it’s Pretty Good for Anteriors Too.
BruxZir has grown far beyond just a gold crown replacement, but is now actually the ideal posterior replacement.It is our most prescribed posterior material. BruxZir anteriors make up 15% of all of our anterior cases too.
Before After
Before After
Before After
Before After
$99
• We are one of a small group worldwide, that have the Official BruxZir Mill in-house. It is optimizedto mill the BruxZir material with the highest accuracy of fit, contacts, occlusion, and esthetics.
Preparation Requirements – Chamfer prep is recommended but feather edge is acceptable..5mm occlusal reduction is acceptable but preferably reduction of 1.5mm will produce superior results.Cementation Recommendations – Resin reinforced glass ionomer, resin cements, or self-adhesive resin cements.
*Z-Prime Plus by Bisco is an excellent addition to increase bond strength to zirconia.
We’re ALL About ALL CERAMICS
After After
Zeternity makeover fabricated by Artistic Dental Lab. IPS e.max crowns #8 & #9 fabricated by Artistic Dental Lab.
Before Before
Layered Zirconia Crowns & Bridges With A Lifetime Warranty
Strongest & Most Translucent Layered Zirconia Available (up to 1510 MPa.)
Match the Most Complex Custom Shades
Only Available From Artistic Dental Lab
Layered Lithium Disilicate
Monolithic Lithium Disilicate
Crowns, Veneers, No-prep Veneers, Inlays, Onlays
Artistic Dental Lab is Your Best Choice fore.max
Preparation Requirements – 1mm circumferential chamfer
Cementation Recommendations – Resin reinforced glass ionomer, resin cements, or self-adhesive resin cements. Cement good retention cases. Bond poor retention cases. You must bond veneer cases. *Z-Prime Plus by Bisco is an excellent addition to increase bond strength to zirconia.
All cases on both pages were fabricated by Artistic Dental Lab and ceramic artistry by Tony Astorino.
From Makeovers to Matching Difficult Shades
Zeternity #6 - #11
Zeternity #8 & #9
Zeternity #7
Zeternity #8
Before After
Before
Before After
Before After
Before After
Perfect Detail of Shade &Shape Replication
All Cases FabricatedBy Artistic Dental Lab
Before
After
Before
After
Send us your impression or pre-operative model and we’ll make you ArtisTEMPS provisionals with ideal shapeand function in only 5 days. After preparation, simply reline and cement the ArtisTEMPS.
Why?
Diagnostic Wax-ups
ArtisTEMPS are only available from us and are a registered trademark of Artistic Dental Lab.
1. Diagnostic wax-up fabricatedby Artistic Dental Lab.
2. Temps made by dentist fromlab’s diagnostic wax-up.
Pre-op Post-op
FixedAlthough much of our PFM, Captek, and full cast indications are being replaced by BruxZir, Zeternity, ande.max all ceramics, PFM and full cast still have their place. We continue to keep up with the latest technologyand incorporate CAD/CAM design and fabrication for consistency and accuracy.
• Ideal fit, contacts, and occlusion • Standard and Economy PFM pricing
• Little or No Chairside Adjustments • 5 Year Standard PFM Warranty
• Full Dentures and Partials • Bite Splints • Cusil Dentures• Flexible Partials • Soft Liners • Duracetal• Implants • Mouthgards Tooth/Tissue/Clear• Overdentures • Free Resets Color Clasps
Removables
We use the finest teeth and Lucitone acrylics to provide each patient with an individual arrangement, naturaltissue contours, comfortable fit, and proper function.
PFM crowns 6 -11 fabricated by Artistic Dental Lab.Ceramic artistry by Tony Astorino and Doug Bernath.
Flexible Partials Tooth/Tissue/Clear Color Clasps Upper and Lower Denturesfabricated by Artistic Dental Lab.
Upper and lower dentures were fabricated by Artistic Dental Lab and denture artistry by John Ehrenberg C.D.T.
Before After
Comfort H/S Bite Splints
The Comfort H/S Hard Soft Bite Splint is the most widely prescribed bite splint due to its comfort and fit.The soft internal surface rests comfortably against the teeth and gums, while the hard occlusal surface providesdurability and bonds with acrylic for easy modification.
• Soft, comfortable, polyurethane inner layer• Hard, durable copolyester outer layer
When you prescribe Inclusive Implant Abutments, a natural looking emergence is precisely milled usingCAD/CAM technology to optimize soft tissue contours, gingival health, and crown esthetics.
• Available in Titanium, Zirconia with a Titanium insert, and All Zirconia in the most popular implant systems• Affordable abutment options
WE DO ALL BRANDS AND TYPES OF IMPLANTS• Custom Abutments • Attachments • Abutment Insertion Guide• Overdentures • Surgical Stents Included With All Cases