Prof. Dr. rer. nat. habil. Meinhard Kuna - tu-freiberg.de · Prof. Dr. rer. nat. habil. Meinhard...

Prof. Dr. rer. nat. habil. Meinhard Kuna Stand 01.09.2015

Liste der Publikationen

Seite 1 / 69 Publikationen MKuna 1972 - 2015.docx

2015 427 BURGOLD, A., KUNA, M., PRÜGER, S.

Crack tip fields in ductile materials with martensitic phase transformation – A numerical 2D study Engineering Fracture Mechanics 138 (2015) pp. 169–184 DOI: 10.1016/j.engfracmech.2015.03.002

426 HENSL, T., MÜHLICH, U., BUDNITZKI, M., KUNA, M.

An eigenstrain approach to predict phase transformation and self-accommodation in partially stabilized zirconia Acta Materialia 86 (2015) pp. 361–373 DOI: 10.1016/j.actamat.2014.12.032

425 HÜTTER, G., ZYBELL, L., KUNA, M.

Micromechanical modeling of crack propagation in nodular cast iron with competing ductile and cleavage failure Engineering Fracture Mechanics (2015) online DOI: 10.1016/j.engfracmech.2015.06.039


Micromechanisms of fracture in nodular cast iron: From experimental findings towards modeling strategies - A Review Engineering Fracture Mechanics 144 (2015) pp. 118-141 DOI: 10.1016/j.engfracmech.2015.06.042

423 KOZINOV, S., KUNA, M.

Simulation of damage in ferroelectric actuators by means of cohesivezone model Sensors and Actuators A: Physical 233 (2015) pp. 176–183 DOI: 10.1016/j.sna.2015.06.030

422 KUNA, M., BURGOLD, A., PRÜGER, S.

Stress analysis and configurational forces for cracks in TRIP-steels International Journal of Fracture 193, 2 (2015) pp. 171-187 DOI: 10.1007/s10704-015-0027-0

421 MIKULICH, V., NASSAUER, B., KUNA, M., BRÜCKER, C.

Experimental and numerical study of interaction between particle loaded fluid and a rough wall with micro pillars Tribology International 83 (2015) pp. 42–50 DOI: 10.1016/j.triboint.2014.10.009

420 NASSAUER, B., KUNA, M.

Impact of micromechanical parameters on wire sawing: a 3D discrete element analysis Computational Particle Mechanics 2 (2015) pp. 63–71 DOI 10.1007/s40571-015-0036-9

419 RASCHE, S., KUNA, M.

Improved small punch testing and parameter identification of ductile to brittle materials International Journal of Pressure Vessels and Piping 125 (2015) pp. 23–34 DOI 10.1016/j.ijpvp.2014.09.001




418 SEUPEL, A., KUNA, M.

Application of a Local Continuum Damage Model to Porous TRIP-Steel Applied Mechanics and Materials 784 (2015) pp. 484-491 DOI: 10.4028/www.scientific.net/AMM.784.484

417 STORM, J., ABENDROTH, M., KUNA, M.

Influence of curved struts, anisotropic pores and strut cavities on the effective elastic properties of open-cell foams Mechanics of Materials 86 (2015) pp. 1–10 DOI: 10.1016/j.mechmat.2015.02.012

416 ZHANG, D., ABENDROTH, M., KUNA, M., STORM, J.

Multi-axial brittle failure criterion using Weibull stress for open Kelvin cell foams International Journal of Solids and Structures (2015) online DOI: 10.1016/j.ijsolstr.2015.04.020

415 BURGOLD, A., KUNA, M.

Beanspruchungsanalyse von Rissen in TRIP-Stählen und der Einfluß der Phasenumwandlung, Streess analysis of cracks in TRIP-steels and influence of phase transformation 47. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 247 (2015) pp. 209-218 09.-11.02.2015 Freiberg ISSN 1616-4687

414 HORN, M., ZYBELL, L., KUNA, M., HELFEN, L., MORGENEYER, T. F.

Untersuchung der duktilen Versagensmechanismen in Gusseisen unter Schubbeanspruchung mittels Röntgenlaminographie, Investigation of ductile Failure mechanisms in cast iron under shear loading by means of x-Ray laminography 47. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 247 (2015) pp. 177-178 09.-11.02.2015 Freiberg ISSN 1616-4687


Anwendung eines elektromechanischen Kohäsivzonenmodells auf ferroelektrische Aktuatoren, Electromechanical cohesive zone model applied to ferroelectric actuators 47. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 247 (2015) pp. 3-14 09.-11.02.2015 Freiberg ISSN 1616-4687


Numerical Analysis of Fracture of Pre-stressed ferroelectric actuator taking into account cohesive zone for damage accumulation SMART (2015) Ponta Delagda, Portugal




411 KUNA, M.

40 Jahre Finite Elemente in der Bruchmechanik - Historische Rückblicke und Einsichten, 40 years finite elements in fracture mechanics - historical reviews and insights 47. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 247 (2015) pp. 1-2 09.-11.02.2015 Freiberg ISSN 1616-4687

410 KUNA, M., SEUPEL, A.

A Phenomenological Damage Model for Elastoplastic Behavior of Particle Reinforced TRIP-Steel Matrix Composites based on Micromechanical Simulations CFRAC (2015) Cachan, Frankreich

409 SEUPEL, A., KUNA, M.

Erweiterung eines duktilen Schädigungsmodells zur Beschreibung von TRIP-Stählen, An extended material model for ductile damage of TRIP-Steels 47. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 247 (2015) pp. 83-92 09.-11.02.2015 Freiberg ISSN 1616-4687




2014 408 BÄCKER, D., KUNA, M., HÄUSLER, CHR.

Eigenfunctions of crack problems in the Mindlin plate theory ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 1 – 13 (2014) DOI: 10.1002/zamm.201300256

407 BURGOLD, A. , KUNA, M., PRÜGER, S.

Material forces in consideration of phase transformation in TRIP-steel Procedia Materials Science 3 (2014) pp. 461-466 DOI: 10.1016/j.mspro.2014.06.077

406 HÜTTER, G., LINSE, T., ROTH, ST., MÜHLICH, U., KUNA, M.

A modeling approach for the complete ductile–brittle transition region: cohesive zone in combination with a non-local Gurson-model International Journal of Fracture 185 (2014) pp. 129–153 ISSN: 0376-9429 DOI: 10.1007/s10704-013-9914-4

405 HÜTTER, G., MÜHLICH, U. KUNA, M.

Micromorphic homogenization of a porous medium: elastic behavior and quasi-brittle damage Continuum Mechanics and Thermodynamics (2014) online ISSN: 0935-1175 DOI: 10.1007/s00161-014-0402-5


Micromechanical modeling of crack propagation with competing ductile and cleavage failure Procedia Materials Science 3 (2014) pp. 428-433 DOI: 10.1016/j.mspro.2014.06.072


Size effects due to secondary voids during ductile crack propagation International Journal of Solids and Structures 51 (2014) pp. 839-847 DOI: 10.1016/j.ijsolstr.2013.11.012

402 KOZINOV, S., KUNA, M., ROTH, ST.

A cohesive zone model for the electromechanical damage of piezoelectric/ferroelectric materials Smart Materials and Structures 23 (2014) 055024 (13pp) DOI: 10.1088/0964-1726/23/5/055024

401 KUNA, M., BÄCKER, D.

A PVDF sensor for the in-situ measurement of stress intensity factors during fatigue crack growth Procedia Materials Science 3 (2014) pp. 473-478 DOI: 10.1016/j.mspro.2014.06.079




400 LINSE, T. , KUNA, M., VIEHRIG, H.-W.

Quantification of brittle-ductile failure behavior of ferritic reactor pressure vessel steels using the Small-Punch-Test and micromechanical damage models Materials Science and Engineering A 614 (2014) pp. 136-147 DOI: 10.1016/j.msea.2014.05.095

399 NASSAUER, B., HESS, A., KUNA, M.

Numerical and experimental investigations of micromechanical processes during wire sawing International Journal of Solids and Structures 51 (2014) pp. 2656 -2665 DOI: 10.1016/j.ijsolstr.2014.03.040

398 PRÜGER, S., SEUPEL, A., KUNA, M.

A thermomechanically coupled material model for TRIP-steel International Journal of Plasticity 55 (2014) pp. 182–197 DOI: 10.1016/j.ijplas.2013.10.005

397 RABOLD, F., KUNA, M.

Automated finite element simulation of fatigue crack growth in three-dimensional structures with the software system ProCrack Procedia Materials Science 3 (2014) pp. 1099–1104 20th European Conference on Fracture (ECF20) DOI: 10.1016/j.mspro.2014.06.179

396 RASCHE, ST., STROBL, ST., KUNA, M., BERMEJO, R., LUBE, T.

Determination of Strength and Fracture Toughness of Small Ceramic Discs Using the Small Punch Test and the Ball-on-three-balls Test Procedia Materials Science 3 (2014) pp. 961–966 DOI: 10.1016/j.mspro.2014.06.156

395 ROTH, S., HÜTTER, G., KUNA, M.

Simulation of fatigue crack growth with a cyclic cohesive zone model International Journal of Fracture 188 (2014) pp. 23-45 ISSN: 0376-9429 DOI: 10.1007/s10704-014-9942-8

394 ROTH, ST., KUNA, M.

Fatigue modelling with a cyclic cohesive zone approach Procedia Materials Science 3 (2014) pp. 325–330 DOI: 10.1016/j.mspro.2014.06.056

393 SOLTYSIAK, S., ABENDROTH, M., KUNA, M., KLEMM, Y., BIERMANN, H.

Strength of fine grained carbon-bonded alumina (Al2O3-C) materials obtained by means of the small punch test Ceramics International (2014) pp. 9555-9561 DOI: 10.1016/j.ceramint.2014.02.030

392 SOLTYSIAK, S., SELENT, M., ROTH, S., ABENDROTH, M., HOFFMANN, M., BIERMANN, H.,

KUNA, M. High-temperature small punch test for mechanical characterization of a nickel-base superalloy Materials Science and Engineering A 613 (2014) pp. 259–263




DOI: 10.1016/j.msea.2014.06.105 391 WANG, Y.-Z., KUNA, M.

General solutions of mechanical-electric-magnetic fields in magneto-electro-elastic solid containing a moving anti-plane crack and a screw dislocation ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 1 – 11 (2014) DOI 10.1002/zamm.201300279

390 WANG, Y.-Z., KUNA, M.

Screw dislocation in functionally graded magnetoelectroelastic solids Philosophical Magazine Letters (2014) Vol. 94, No. 2, pp. 72–79 DOI: 10.1080/09500839.2013.861089

389 WANG, Y.-Z., KUNA, M.

Time-harmonic dynamic Green’s functions for two-dimensional functionally graded magnetoelectroelastic materials Journal of Applied Physics 115, 043518 (2014) DOI: 10.1063/1.4862757

388 ZYBELL, L., HÜTTER, G., LINSE, T., MÜHLICH, U., KUNA, M.

Size effects in ductile failure of porous materials containing two populations of voids European Journal of Mechanics - A/Solids (2014) pp. 8-19 DOI: 10.1016/j.euromechsol.2013.11.006

387 ZYBELL, L., SELENT, M., HÜBNER, P., KUNA, M.

Overload effects during fatigue crack growth in nodular cast iron-simulation with an extended strip-yield model Procedia Materials Science 3 ( 2014 ) pp. 221 – 226 20th European Conference on Fracture (ECF20) DOI: 10.1016/j.mspro.2014.06.039

386 BÄCKER, D., KUNA, M. , HÄUSLER, C.

Measurement of Kirchhoff's stress intensity factors in bending plates Proceeding SPIE 9061, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2014, 90611Q (2014) DOI: 10.1117/12.2044472

385 HEIN, J., KUNA, M.

Thermoelastisches J-Integral für gradierte und temperaturabhängige Materialien 46. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 246 (2014) pp. 43-52

384 HENKEL, S., ZYBELL, L., MOTTISCHKA, T., HAHN, P., BIERMANN, H., KUNA, M.

Einfluss von rissparalellen Zusatzbeanspruchungen und Überlasten auf das zyklische Risswachstumsverhalten von duktilem Guseisen mit Kugelgraphit 46. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 246 (2014) pp. 61-70

383 HENSL, TH., MÜHLICH, U., BUDNITZKI, M., KUNA, M.

An eigenstrain approach to predict phase transformation and twinning in partially stabilized zirconia EMMC14-European Mechanics of Materials Conference




Gothenburg, 27.-29.08.2014 382 HÜTTER, G., ZYBELL, L., KUNA, M.

Mircomechnische Simulation der Rissausbreitung in Gusseisen mit Kugelgraphit im gesamten spröd-duktilen Übergangsbereich 46. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 246 (2014) pp. 177-186

381 KOZINOV, S,. ROTH, S., KUNA, M.

Development of a cohesive model for damage simulation in ferroelectric materials subjected to electromechanical loading 11th World Congress on Computational Mechanics (WCCM XI),Ed. by Oñate E., Oliver J. and Huerta A.; (2014) pp. 4320-4331

380 KOZINOV, S., KUNA, M., ROTH, ST.

Numerische Simulation der Rissinitiierung und des Risswachstums in piezoelektrischen Stapelaktuatoren 46. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 246 (2014) pp. 53-54

379 KUNA, M., NASSAUER, B.

Configurational forces concept for spatial crack configurations in ferroelectric materials Proceedings of the second seminar on the mechanics of multifunctional materials (2014) Bad Honnef, pp. 61-64

378 MENZER, M., KUNA, M.

Damage identification in two-dimensional structures using Lamb waves Proceeding SPIE 9061, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems (2014) DOI: 10.1117/12.2042770

377 ROTH, S., HÜTTER, G., KUNA, M.

FE-Simulation des Ermüdungsrisswachstums mithilfe eines zyklischen Kohäsivgesetzes 46. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 246 (2014) pp. 187-196




2013 376 KUNA, M.

Finite Elements in Fracture Mechanics; Theory - Numerics – Applications Series: Solid Mechanics and its Applications, Vol. 201 Springer (2013) Hardcover and eBook ISBN 978-94-007-6680-8

375 RABOLD, F., KUNA, M., LEIBELT, T.

PROCRACK: A Software for Simulating Three-Dimensional Fatigue Crack Growth Advanced Finite Element Methods and Applications, Ed. T. Apel, O. Steinbach Springer Verlag, Berlin-Heidelberg (2013) pp. 355-374 ISBN: 978-364230315-9

374 BÄCKER, D., HÄUSLER, CHR., KUNA, M.

Ein Sensorenkonzept zur In-situ-Rissüberwachung in plattenartigen Strukturen Materialprüfung/Materials Testing 55 (2013) 11-12 pp. 830-840

373 HÜTTER, G., LINSE, T., MÜHLICH, U., KUNA, M.

Simulation of ductile crack initiation and propagation by means of a non-local Gurson-model International Journal of Solids and Structures 50 (2013) pp. 662-671 DOI: 10.1016/j.ijsolstr.2012.10.031

372 HÜTTER, G., ZYBELL, L., MÜHLICH, U., KUNA, M.

Consistent Simulation of Ductile Crack Propagation with Discrete 3D Voids Computational Materials Science 80 (2013) pp. 61-70 DOI: 10.1016/j.commatsci.2013.04.013

371 LIEDKE, TH., KUNA, M.

Discrete element simulation of micromechanical removal processes during wire sawing Wear 304 (2013) pp. 77–82 DOI: 10.1016/j.wear.2013.04.026

370 MEHLHORN, L. , MÜHLICH, U., KUNA, M.

A material model of particle size dependent transformation plasticity of psz ceramics under thermomechanical loading Advanced Engineering Materials 15, 7 (2013) pp. 638-645 DOI: 10.1002/adem.201200375

369 MÜHLICH, U. , ZYBELL, L., HÜTTER, G., KUNA, M.

A first-order strain gradient damage model for simulating quasi-brittle failure in porous elastic solids Archive of Applied Mechanics, 83, 6 (2013) pp. 955-967 ISSN: 0939-1533 DOI: 10.1007/s00419-013-0729-6


Contact forces of polyhedral particles in discrete element method Granular Matter Vol. 15 (2013) pp. 349-355 ISSN: 1434-5021 DOI: 10.1007/s10035-013-0417-9




367 NASSAUER, B., LIEDKE,T., KUNA,M.

Polyhedral particles for the discrete element method - Geometry representation contact detection and particle generation Granular Matter Vol. 15 (2013) pp. 85-93 ISSN: 1434-5021 DOI: 10.1007/s10035-012-0381-9

366 PRÜGER, S., MEHLHORN, L., MÜHLICH, U., KUNA, M.

Study of Reinforcing Mechanisms in TRIP-Matrix Composites under Compressive Loading by Means of Micromechanical Simulations Advanced Engineering Materials 15, 7 (2013) pp. 542-549 DOI: 10.1002/adem.201200323

365 SOLTYSIAK, S., ABENDROTH, M., KUNA, M., DUDCZIG, S.

Influence of the Cabores content on the toughness of carbon bonded alumina (Al2O3-C) Advanced Engineering Materials 15-12 (2013) pp.1231 -1234 DOI: 10.1002/adem.201300173

364 STORM, J., ABENDROTH, M., EMMEL, M., LIEDKE, TH., BALLASCHK, U., VOIGT, C., SIEBER,

T., KUNA, M. Geometrical modelling of foam structures using implicit functions International Journal of Solids and Structures 50, 3-4 (2013) pp. 548-555 DOI: 10.1016/j.ijsolstr.2012.10.026

363 STORM, J., ABENDROTH, M., ZHANG, D., KUNA, M.

Geometry dependent effective elastic properties of open-cell foams based on Kelvin cell models Advanced Engineering Materials 15, 12 (2013) pp. 1292–1298 DOI: 10.1002/adem.201300141

362 VOIGT, C., STORM, J., ANEZIRIS, C.G., ABENDROTH, M., KUNA, M., HUBALKOVA, J.

The influence of the measurement parameters on the crushing strength of reticulated ceramic foams Journal of Materials Research (2013) Vol. 28. Iss. 17 DOI: 10.1557/jmr.2013.96

361 BÄCKER, D., KUNA, M.

Alternative sensor design for monitoring fatigue crack growth 9th International Workshop on Direct and Inverse Problems in Piezoelectricity (2013) Weimar

360 BÄCKER, D., KUNA, M. , HÄUSLER, C.

Piezoelectric sensor for in situ measurement of stress intensity factors 5. International Symposium on Piezocomposite Applications (2013) Dresden

359 GLOGER, D., ENDERLEIN, M., KUNA, M.

Error Analysis for Submodels with Cracks: Extension to Elastic-Plastic Material Proceedings of the 3rd International Conference on Computational Modeling of Fracture and Failure of Material and Structures CFRAC, Praha (2013) p. 99





Integrated Damage Mechanics Approach to Brittle and Ductile Crack Propagation Proceeding of the 13th International Conference on Fracture (2013) Beijing


Simulation der Rissausbreitung im gesamten spröd-duktilen Übergangsbereich 45. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 245 (2013) pp. 49-58

356 KOCH, F., ENDERLEIN, M., KUNA, M., HÜBNER, P.

Residual stress analysis of in-service welded gas pipelines Proceedings of the ASME 2013 Pressure Vessels & Piping Division Conference, PVP2013-97585 Paris, France(July 14-18, 2013)

355 KUNA, M.

FEM-Techniken zur Rissanalyse im Rahmen der Elastisch-Plastischen Bruchmechanik (EPBM) Bruchmechanische Berechnungsmethoden (2013) Freiberg DGM-Fortbildungsseminar

354 KUNA, M.

Rissspitzenbeanspruchung (K, J,CTOD) Bruchmechanische Berechnungsmethoden (2013) Freiberg DGM-Fortbildungsseminar

353 LINSE, T., KUNA, M.

Application of damage models to the ductile-brittle transition region of reactor steels Proceeding of the 13th International Conference on Fracture (2013) Beijing


A discrete element method for polyhedral particles Proceedings of the III International Conference on Particle based Methods Fundamentals and Applications (Particles 2013) Stuttgart, Germany ISBN: 978-84-941531-8-1


Discrete Element Simulation of Wire Sawing with Polyhedral Particles Freiberger Forschungsforum, 1st Freiberg Sawing Symposium June 13-14 (2013)


PROCRACK - A Software Tool for Finite Element Simulation of Three-Dimensional Fatigue Crack Growth Proceedings of the 3rd International Conference on Computational Modeling of Fracture and Failure of Material and Structures CFRAC, Praha (2013) p. 186 ISBN: 978-80-01-05279-2

349 ROTH, S., KUNA, M.

Finite Element Analyses of Fatigue Crack Growth Under Small Scale Yielding




Conditions Modelled with a Cyclic Cohesive Zone Approach In: Onate, E., Owen, D.R.J., Peric, D. and Suarez, B. (eds.) ISBN 978-84-941531-5-0

348 ROTH, ST., KUNA, M. Modelling of Fatigue Crack Growth with a Cohesive Zone Model Approach Including a Local Endurance Limit Proceedings of the 3rd International Conference on Computational Modeling of Fracture and Failure of Material and Structures CFRAC, Praha (2013) p. 93

347 SELENT, M., ZYBELL, L., HÜBNER, P., KUNA, M.

Berechnung von Reihenfolgeeffekten in Gusseisen mit Kugelgraphit mit einem erweiterten Fließstreifenmodell 45. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 245 (2013) pp. 177-186

346 STORM, J., ABENDROTH, M., KUNA, M.

Geometry dependent effective heat conductivity of open-cell foams based on Kelvin cell models Unitecr (2013) Conference Proceedings Victora, BC, Canada

345 ZYBELL, L., HÜTTER, G., MÜHLICH, U., KUNA, M.

Mikromechanische Simulation der duktilen Rissinitiierung in Gusseisen mit Kugelgraphit 45. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 245 (2013) pp. 243-252

344 ZYBELL, L., SELENT, M., HÜBNER, P., KUNA, M.

An extended strip yield model for the calculation of overload effects during fatigue crack growth in nodular cast iron Proceedings of the Thirteenth International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (2013) Jacksonville, Florida




2012 343 BUDNITZKI, M., KUNA, M.

A thermomechanical constitutive model for phase transformations in silicon under pressure and contact loading conditions International Journal of Solids and Structures 49, 11-12 (2012) pp. 1316-1324 DOI: 10.1016/j.ijsolstr.201202004

342 BUDNITZKI, M., KUNA, M.

Modeling silicon under contact loading conditions: aspects of non associated flow Technische Mechanik 32 (2) (2012) pp. 146-154


Optimizing thermal shock resistance of layered refractories Advanced Engineering Materials 14, 6 (2012) pp. 408-415 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim DOI: 10.1002/adem.201100283

340 HEIN, J., SCHEITHAUER, U., HADERK, K., KUNA, M., MICHAELIS, A.

Prospects of a New Generation of Refractories Made by Ceramic Multilayer Technology Refractories Manual 2 (2012) pp. 91-95

339 HEIN, J., STORM, J., KUNA, M.

Numerical thermal shock analysis of functionally graded and layered materials International Journal of Thermal Sciences 60 (2012) pp. 41-51 DOI: 10.1016/j.ijthermalsci.201205005


Ductile Crack Propagation by Plastic Collapse of the Intervoid Ligaments International Journal of Fracture, 176 (2012) pp. 81-96 DOI: 10.1007/s10704-012-9728-9

337 LI, Q., KUNA, M.

Evaluation of electromechanical fracture behavior by configurational forces in cracked ferroelectric polycrystals Computational Materials Science 57 (2012) pp. 94-101 DOI: 10.11016/j.commatsci.201101050

336 LI, Q., KUNA, M.

Inhomogeneity and material configurational forces in three dimensional ferroelectric polycrystals European Journal of Mechanics - A/Solids 31 (2012) pp. 77-89 DOI: 10.1016/j.euromechsol.201107004

335 LINSE, T., HÜTTER, G., KUNA, M.

Simulation of crack propagation using a gradient-enriched ductile damage model based on dilatational strain Engineering Fracture Mechanics 95 (2012) pp. 13-28 DOI: 10.1016/j.engfracmech.2012.07.004




334 LUDWIG, C., KUNA, M.

An analytical approach to determine the pressure distribution during chemical mechanical polishing Journal of Electronic Materials 41/9 (2012) pp. 2606-2612 DOI: 10.1007/s11664-012-2151-1

333 MOTTITSCHKA, T., PUSCH, G., BIERMANN, H., ZYBELL, L., KUNA, M.

Influence of graphite spherical size on fatigue behaviour and fracture toughness of ductile cast iron EN GJS-400-18LT International Journal of Materials Research 103 (2012) pp. 1-10

332 MÜHLICH, U., ZYBELL, L., KUNA, M. Estimation of material properties for linear elastic strain gradient effective media European Journal of Mechanics - A/Solids 31 (2012) pp. 117-130 DOI: 10.1016/j.euromechsol.2011.06.011

331 PRÜGER S., MEHLHORN L., SOLTYSIAK S., KUNA M.

Influence of material and interface properties on the transformation behaviour of particle reinforced TRIP-matrix composites Computational Materials Science 64 (2012) pp. 273 - 277 DOI: 10.1016/j.commatsci.2012.04.031

330 ROTH, S., HÜTTER, G., MÜHLICH, U., NASSAUER, B., ZYBELL, L., KUNA, M.

Visualisation of User Defined Finite Elements with ABAQUS/Viewer GACM Report (2012) pp. 7-14

329 STORM, J., HEIN, J., KUNA, M.

Numerical Study to Optimize Thermal Shock Resistance of a FGM Nozzle refractories WOLRDFORUM 4 (2012) [1] pp. 175-180

328 WIPPLER, K., KUNA, M.

Application of the Θ-method to 3D BEM analysis of cracks in piezoelectric components Key Engineering Materials 488-489 (2012) pp. 363-366 DOI: 10.4028/www.scientific.net/KEM.488-489.363

327 ZYBELL, L., CHAVES, H., KUNA, M., MOTTITSCHKA, T., HENKEL, S., PUSCH, G.,

BIERMANN,H. Microstructural investigations of crack path development in nodular cast iron under variable amplitude loading Proceedings Crack Path 4, Gaeta (2012)

326 ZYBELL, L., CHAVES, H., KUNA, M., MOTTITSCHKA, T., PUSCH, G., BIERMANN, H.

Optical in situ investigations of overload effects during fatigue crack growth in nodular cast iron Engineering Fracture Mechanics 95 (2012) pp. 45-56 DOI: 10.1016/j.engfracmech.2012.01.006

325 ZYBELL, L., MÜHLICH, U., KUNA, M., ZHANG, Z. L.

A three-dimensional finite element for gradient elasticity based on a mixed-type formulation Computational Materials Science 52 (2012) pp. 268-273 DOI: 10.1016/j.commatsci.2011.02.026




324 BÄCKER, D., HÄUSLER, C., KUNA, M.

A piezoelectric PVDF film based sensor for monitoring fatigue crack growth in thin plates subjected to bending 8th International Workshop on Direct and Inverse Problems in Piezoelectricity, (2012) Grasellenbach

323 BURGOLD, A., HÜTTER, G., ZYBELL, L., MÜHLICH, U. , KUNA, M.

Mikromechanische Simulation des duktilen Risswachstums durch plastischen Kollaps 44. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 244 (2012) pp.191-200

322 GLOGER, D., ENDERLEIN, M., KUNA, M.

Error analysis for FEM analysis of cracks using submodels Proceedings of the ASME 2012 Pressure Vessels & Piping Division Conference, PVP2012-8522 Toronto, Ontario, CANADA, July 15-19 (2012)


Optimal design of layered refractories for thermal shock resistance Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) CD-ROM September 10-14, 2012, Vienna, Austria ISBN: 978-3-9502481-9-7


2D and 3D Simulation of Ductile Crack Propagation by Plastic Collapse of Micro-ligaments Proceeding of the 19th European Conference on Fracture (2012)

319 KOCH, F., ENDERLEIN, M., KUNA, M.

Simulation der Rohrvorwärmung für das Schweißen an Gashochdruckleitungen 10. Forum Softwaregestützte Werkzeuge für die Schweißtechnik 12. April 2012 Halle (Saale) Vortragsband (2012) pp. 27-36

318 KUNA, M., LINSE, T., ABENDROTH, M., RASCHE, ST.

Anwendung von Schädigungsmodellen im Duktilen Spröden und Übergangsbereich bei Stählen 44. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 244 (2012) pp. 211-216

317 MÜHLICH, U., KUNA, M.

Simulation of quasi-brittle failure by means of a continuum damage model based on first order strain gradient elasticity European Congress on Computational Methods in Applied Sciences and Engineering - ECCOMAS (2012) e-Book Full (2012) pp.6332-6348

316 NASSAUER, B., ENDERLEIN, M., KUNA, M.

Three dimensional crack analysis in ferroelectrics using configurational forces concept ICTAM 2012 - 23rd International Congress of Theoretical and Applied Mechanics (August 2012) Beijing, China




315 PRÜGER S., MEHLHORN L., MÜHLICH U., KUNA M.

Untersuchung des Verstärkungsmechanismus in partikelverstärkten TRIP-Matrix-Compositen Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 47 Hrsg.: B. Wielage, Chemnitz (2012) pp. 363-369 ISBN: 978-3-00-039358-7

314 RABOLD, F., LEIBELT, T., SCHMATZ, S, KUNA, M.

PROCRACK: Ein Programmsystem zur Simulation des Ermüdungsrisswachstums 44. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 244 (2012) pp. 171–180

313 SOLTYSIAK, S., EMMEL, M., BEHM, T., ABENDROTH, M., KUNA, M., ANEZIRIS, C.

Mechanical characterization of carbon bonded alumina using the Small Punch Test 2nd International Conference SSTT-Small Sample Test Techniques (2012) 02.-04-10.2012 in Ostrava (2012), ISBN 978-80-260-0079-2 Ostrawa ISBN 978-80-260-0079-2

312 STORM, J., LIEDKE, TH., ABENDROTH, M., KUNA, M.

Generating foam structures using implicit functions Materials Science Engineering (MSE 2012)

311 TRÜMMEL, N., RABOLD, F., KUNA, M.

Numerische Simulation zur Rissentstehung und -ausbreitung mithilfe der X-FEM in Abaqus 44. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 244 (2012) pp. 151-160

310 ZYBELL, L., HÜTTER, G., LINSE, T., MÜHLICH, U., KUNA, M.

Nichtlokale Modellierung des duktilen Versagens von Gusseisen mit Kugelgraphit 44. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 244 (2012) pp. 47-56


Numerische Beanspruchungsanalysen und bruchmechanische Festigkeitskriterien zur Optimierung der Thermoschockbeständigkeit von gradierten und geschichteten Strukturen aus Feuerfestwerkstoffen Arbeitsbericht & Poster zum SPP 1418 FIRE-Projekt KU 929/16-2 (2012)




2011 308 KUNA, M., RICOEUR, A.

Proceedings of the IUTAM Symposium on Multiscale Modelling of Fatigue Damage and Fracture in Smart Materials held in Freiberg, Germany, September 1-4, 2009 Series: IUTAM Bookseries, Vol. 24, 1st Edition., Springer Science+Business Media (2011), XXII, 396 p., Hardcover ISBN: 978-90-481-9886-3


Piezoelektrische Polyvinylidenfluorid - Folien zur Messung bruchmechanischer Kenngrößen tm - Technisches Messen, 78, 6 (2011) pp. 293-303

306 BÄCKER, D., RICOEUR, A., KUNA, M.

Sensor concept based on piezoelectric PVDF films for the structural health monitoring of fatigue crack growth Structural Durability and Health Monitoring 7, 1 (2011) pp.1-22

305 BUDNITZKI, M., KUNA, M.

A novel constitutive law for Silicon under contact loading Proceedings in Applied Mathematics and Mechanic (2011)


Simulation of Crack Propagation under Small-Scale Yielding by means of a Non-local GTN-Model Proceedings in Applied Mathematics and Mechanics 11 (2011) pp. 234-235


Simulation of Local Instabilities during Crack Propagation in the Ductile-brittle Transition Region European Journal of Mechanics - A/Solids 30 (2011) pp. 195-203

302 JANSKI, L., KUNA, M.

Adaptive finite element modeling of stationary and propagating cracks in piezoelectric structures Archive of Mechanics 63, 5–6 (2011) pp. 599–619

301 KULAWINSKI, D., NAGEL, K., HENKEL, S., HÜBNER, P., FISCHER, H., KUNA, M., BIERMANN,

H. Characterization of stress–strain behavior of a cast TRIP steel under different biaxial planar load ratios Engineering Fracture Mechanics 78 (2011) pp. 1684–1695

300 LI, Q., RICOEUR, A., KUNA, M.

Coulomb traction on a penny-shaped crack in a three dimensional piezoelectric body Archive of Applied Mechanics 81, 6 (2011) pp. 685-700 DOI: 10.1007/s00419-010-0443-6

299 LIEDKE T., KUNA, M.

A macroscopic mechanical model of the wire sawing process International Journal of Machine Tools and Manufacture 51, 9 (2011) pp. 711-720




DOI: 10.1016/j.ijmachtools.2011.05.005 298 MEHLHORN, L.,PRÜGER, S., SOLTYSIAK, S., MÜHLICH, U., KUNA, M.

Influence of Material and Interface Properties on the Overall Behaviour of Particle Reinforced Steel with Focus on the Phase Transformation Capabilities of the Individual Components Steel Research International 82,9 (2011) pp. 1022-1031 DOI: 10.1002/srin.201100083

297 PRÜGER, S., KUNA, M.

A constitutive model for a high alloyed cast CrMnNi TRIP-steel Proceedings in Applied Mathematics and Mechanics 11 (2011) pp. 425-426

296 PRÜGER, S., KUNA, M., NAGEL, K., BIERMANN, H.

Implementation of a material model for a cast TRIP-steel XI International Conference on Computational Plasticity. Fundamentals and Applications COMPLAS XI Onate E., Owen, D.R.J., Peric, D. and Suarez, B. (Eds) (2011)

295 PRÜGER, S., KUNA, M., WOLF, S., KRÜGER, L.

A Material Model for TRIP-Steels and its Application to a CrMnNi Cast Alloy Steel Res Steel Research International 82,9 (2011) pp. 82, 1070-1079 DOI: 10.1002/srin.201100072


Prediction of fracture toughness of embrittled steels by means of the Small Punch Test Proceedings in Applied Mathematics and Mechanics 11 (2011) pp. 173 – 174 DOI: 10.1002/pamm.201110078


Modelling of interfacial damage and delamination of sprayed coatings with cohesive elements Proceedings in Applied Mathematics and Mechanics (2011)


Piezoelectric sensor for in situ measurement of stress intensity factors Proceedings of SPIE, vol. 7981, 79812T (2011)

291 BÉCHET, E., KUNA, M.

Some Numerical Studies with X-FEM for Cracked Piezoelectric Media Kuna, M. and Ricoeur, A. (eds.). IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials 24 (2011) pp. 141-152

290 GLOGER, D., LEIBELT, T., KUNA, M.

Fehlerbetrachtung zur FEM-Analyse von Rissen mit Submodellen 43. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 243 (2011) pp. 75–84


Simulation lokaler Instabilitäten bei der Rissausbreitung im spröd-duktilen Übergangsbereich 43. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 243 (2011) pp. 235-244




288 JANSKI, L., STEINHORST, P., KUNA M.

Crack propagation simulations in piezoelectric structures with an efficient adaptive finite element tool Kuna, M. and Ricoeur, A. (eds.). IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials 24 (2011) pp. 163-173

287 KOCH, F., ENDERLEIN, M., KUNA, M., HÜBNER, P.

Simulation des Mehrlagenschweißens druckbelasteter Gashochdruckleitungen - Kann Modellierung die zfP und zP ersetzen? 13. Kolloquium Werkstoff- und Bauteilprüfung in der Schweißtechnik 05. Oktober 2011, Halle (Saale) Vortragsband (2011) pp. 77-86

286 KUNA, M., LI, Q.

Configurational forces at three-dimensional cracks in ferroelectric polycrystals International Conference on Computational Modeling of Fracture and Failure - ECCOM (2011) June 2011, Barcelona, Spain (2011)

285 KUNA, M., LINSE, T., ABENDROTH, M., RASCHE, S.

Application of damage models in the ductile brittle and transition region of steels New Trends in mechanics of material, RFBR-DFG-CNRS Trilateral Scientific Seminar Moscow, Russia, 26-29 September 2011 (2011) pp. 11-12

284 LI, Q., ENDERLEIN, M., KUNA M.

Micromechanical Simulation of Ferroelectric Domain Switching at Cracks Kuna M. and Ricoeur A. (eds.). IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials 24 (2011) pp. 101-110


Numerical Study on Interfacial Damage of Sprayed Coatings due to Thermo-Mechanical Fatigue Onate, E., Owen, D.R.J., Peric, D. and Suarez, B. (eds.) XI International Conference on Computational Plasticity

282 SIEBER, T., MÜHLICH, U., LIEDKE, T., KUNA, M.

Simulation des mechanischen Verhaltens irregulärer offenzelliger MMC-Schäume mit Hilfe von Balkennetzwerken generiert aus Laguerre-Mosaiken Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 43 Hrsg.: B. Wielage, Chemnitz (2011) pp. 319-324 ISBN: 978-3-00-035177-8

281 ZYBELL, L., ENDERLEIN, M., KUNA M.

FEM-Techniken zur Analyse von Rissen im Rahmen der LEBM DVM-Weiterbildungsseminar "Bruchmechanik und Ermüdungsrisswachstum", Rostock (2011) pp. 89-103


Arbeitsbericht zum SPP 1418 FIRE-Projekt KU 929/16-1




Numerische Beanspruchungsanalysen und bruchmechanische Festigkeitskriterien zur Optimierung der Thermoschockbeständigkeit von gradierten und geschichteten Strukturen aus Feuerfestwerkstoffen (2011)

279 LINSE, T., KUNA M.

Abschlussbericht/Final Report Reaktorsicherheitsforschung-Vorhaben-Nr./Reactor Safety Research-project No.: 1501343 Quantifizierung des spröd-duktilen Versagensverhaltens von Reaktorstählen mit Hilfe des Small-Punch-Tests und mikromechanischer Schädigungsmodelle




2010 278 KUNA, M.

Numerische Beanspruchungsanalyse von Rissen - Finite Elemente in der Bruchmechanik, 2 verb. Auflage Vieweg+Teubner Vlg. (2010). XII, 446 S. mit 277 Abb. u. 11 Tab. Br. ISBN: 978-3-8348-1006-9

277 BÄCKER, D., RICOEUR, A. , KUNA, M.

Ein Sensorkonzept auf der Basis piezoelektrischer PVDF-Folien zu Messung bruchmechanischer Beanspruchungsgrößen Materialprüfung/Materials Testing 52 (2010) No. 5, pp. 292-299

276 ENDERLEIN, M., KUNA, M.

Untersuchung des Festigkeitsverhaltens beim Schweißen druckbelasteter Gashochdruckleitungen Zeitschrift für Freunde und Förderer der TU Bergakademie Freiberg, 17 (2010) pp. 56-58

275 JANSKI, L., SCHERZER, M., STEINHORST, P., KUNA, M.

Adaptive finite element computation of dielectric and mechanical intensity factors in piezoelectrics International Journal Numerical Methods Engineering, 81 (2010) pp. 1492-1513

274 KUNA, M.

Fracture mechanics of piezoelectric materials - Where are we right now? Engineering Fracture Mechanics 77,2 (2010) pp. 309-326

273 KUNA, M.

Mit Rissen leben – Entwicklung und Anwendung bruchmechanischer Berechnungsmethoden GAMM-Rundbrief 2 (2010) pp. 6-13

272 KUNA, M., ABENDROTH, M., LINSE, T., RASCHE, S.

Characterization of temperature and irradiation dependent material properties by means of the small punch test and advanced numerical methods Metallurgical Journal 63 (2010) pp. 151-160

271 KUNA, M., WIPPLER, S.

A cyclic viscoplastic and creep damage model for lead free solder alloys Engineering Fracture Mechanics 77,18 (2010) pp. 3635-3647

270 LI ,Q., RICOEUR, A., ENDERLEIN, M., KUNA, M.

Evaluation of electromechanical coupling effect by microstructural modeling of domain switching in ferroelectrics Mechanics Research Communications, 37 (3) (2010) pp. 332-336


Fatigue crack growth in nodular cast iron - influences of graphite spherical size and variable amplitude loading Proceedings ICSMA 15, 2009; Journal of Physics: Conference Series, Volume 240 (2010) Article number 012060 DOI: 10.1088/1742-6596/240/1/012060





Influence of overloads on the fatigue crack growth in nodular cast iron: Experiments and numerical simulation Procedia Engineering 2,1 (2010) pp. 1557-1567

267 RAO, B. N., KUNA, M.

Erratum to "Interaction integrals for fracture analysis of functionally graded piezoelectric materials" International Journal of Solids and Structures 45 (20) (2008) pp. 5237-5257 International Journal of Solids and Structures 47, 9 (2010) pp. 1325-1326


Erratum to ”Interaction integrals for fracture analysis of functionally graded magnetoelectroelastic materials” International Journal of Fracture (2008) 153 (15-37) International Journal of Fracture, 161, 2 (2010) pp. 199-201


Interaction integrals for thermal fracture of functionally graded piezoelectric materials Engineering Fracture Mechanics 77 (2010) pp. 37–50

264 BÄCKER, D., RICOEUR, A., KUNA, M.

Entwicklung eines Sensors auf der Basis piezoelektrischer Polymerfolien zur in-situ Messung von Spannungsintensitätsfaktoren bei Ermüdungsrisswachstum 42. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 242 (2010) pp. 93-102


Adaptive finite element modeling of stationary and propagating cracks in piezoelectric structures Proceedings 37. Solid Mechanics Conference, Warsaw (2010) P0210

262 LI ,Q., KUNA, M., ENDERLEIN, M.

Domain switching ahead of the crack emanating from an internal electrode in multilayer ferroeletric actuators Proceedings 18th European Conference on Fracture, Dresden (September 2010) Session B.09.1-2, p. 419

261 LINSE, TH., KUNA, M.

Application of a gradient-enriched ductile damage model in the brittle-ductile transition region of ferritic steels Proceedings of the 18th European Conference on Fracture, Dresden (Ed: D. Klingbeil et al.), (2010) Germany

260 MOTTITSCHKA, T., PUSCH, G., BIERMANN, H., ZYBELL, L. , KUNA, M. , HÜBNER, P.

Ermüdungsrisswachstum in Gusseisen mit Kugelgraphit unter konstanten und variablen Lastamplituden - Teil 1: Experimentelle Untersuchungen 42. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 242 (2010) pp 195-205


Fatigue crack growth in nodular cast iron - influences of graphite spherical size and variable amplitude loading Proceedings ICSMA 15, Journal of Physics: Conference Series 240 (2010) 012060




258 RASCHE, S., BERMEJO, R., KUNA, M., DANZER, R.

Determination of mechanical properties of brittle materials by using the small punch test and the ball on three balls test Proceedings 18th European Conference on Fracture, Dresden (2010)

257 RICOEUR, A., BÄCKER, D., KUNA, M.

In-situ determination of stress intensity factors for the prediction of fatigue crack growth using piezoelectric polymer coatings Proceedings of SPIE - The International Society for Optical Engineering, (2010) 7647, art. no. 764724

256 ZYBELL, L., KUNA, M., CHAVES, H., MOTTITSCHKA, T., PUSCH, G., BIERMANN, H.

Ermüdungsrisswachstum in Gusseisen mit Kugelgraphit unter konstanten und variablen Lastamplituden - Teil 2: Numerische Untersuchungen 42. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 242 (2010) pp. 207-216

255 ZYBELL, L., KUNA, M., CHAVES, H., MOTTITSCHKA, T., PUSCH, G., BIERMANN, H.

Numerical and experimental investigations of overload effects during fatigue crack growth in nodular cast iron Proceedings 18th European Conference on Fracture, Dresden (2010)


Festkörpermechanische Simulation und Optimierung der Beanspruchung beim CM-Polieren Institutsbericht zum Industrieforschungsprojekt TU Bergakademie Freiberg (2010)




2009 253 BECHET, E., SCHERZER, M., KUNA, M.

Application of the X-FEM to fracture of piezoelelectric materials International Journal Numerical Methods Engineering 77 (2009) pp. 1535-1565 DOI: 10.1002/nme.2455

252 KUNA, M.

Bruchmechanische Berechnungsmethoden für die Sicherheit und Lebensdauer von Bauteilen Zeitschrift für Freunde und Förderer der TU Bergakademie Freiberg, 16 (2009) pp. 44–47

251 LINSE, T., KUNA, M., SCHUHKNECHT, J., VIEHRIG, H.-W.

Application of the small-punch test to irradiated reactor vessel steels in the brittle-ductile transition region ASTM Special Technical Publication (2009) pp. 218-235 DOI: 10.1520/JAI101008

250 MÜHLICH, U., ZYBELL, L., KUNA, M.

Micromechanical modelling of size effects in failure of porous elastic solids using first order plane strain gradient elasticity Computational Materials Science 46 (2009) pp. 647–653

249 RICOEUR, A., KUNA, M.

Electrostatic tractions at crack faces and their influence on the fracture mechanics of piezoelectrics International Journal of Fracture 157 (2009) pp. 3-12 DOI:10.1016/j.mechrescom.2008.09.009


Electrostatic tractions at dielectric interfaces and their implication for crack boundary conditions Mechanics Research Communications, 36 (2009) pp. 330-335

247 SPRINGMANN, M., KÜHHORN, A., KUNA, M., SCHERZER, M.

Influence of strain localization on parameter identification Journal of Engineering Materials and Technology, Transactions of the ASME, 131 (1), (2009) pp. 0110031-0110039

246 WÜNSCHE, M., ZHANG, C., KUNA, M.

Dynamische Rissanalyse in geschichteten anisotropen Verbundwerkstoffen mit einer Zeitbereichs-Randelementmethode Materialprüfung/Materials Testing 51, 3 (2009) pp. 116-125

245 WÜNSCHE, M., ZHANG, CH., KUNA, M., HIROSE, S., SLADEK, J., SLADEK, V.

A hypersingular time-domain BEM for 2D dynamic crack analysis in anisotropic solids International Journal Numerical Methods Engineering, 78-2 (2009) pp. 127–150 DOI: 10.1002/nme.2477




244 WÜNSCHE, M., ZHANG, CH., SLADEK, J., SLADEK, V., HIROSE, S., KUNA, M.

Transient dynamic analysis of interface cracks in layered anisotropic solids under impact loading International Journal of Fracture, 157, 1-2, (2009) pp. 131-147 DOI: 10.1007/s10704-008-9262-y

243 ZYBELL, L., MÜHLICH, U., KUNA, M.

Constitutive equations for porous plane-strain gradient elasticity obtained by homogenization Archive of Applied Mechanics 79 (2009) pp. 359–375 DOI 10.1007/s00419-008-0238-1

242 BECHET, E., KUNA, M.

Some numerical experiments about cracked piezoelectric media Proceedings of the IUTAM Symposium Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials Systems Freiberg, September 1-4 (2009)

241 BIERMANN, H., ANEZIRIS, C. G., KUNA, M.

Collaborativ Research Centre TRIP-Matrix-Composite ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations Prague (CZ) DOI: 10.1051/esomat/200905002


Collaborativ Researcn Centre TRIP-Matrix-Composite ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, 05002 (2009) edited by Sittner P., Heller L. and Paidar V., published by EDP Sciences (www.esomat.org), DOI:10.1051/esomat/200905002


Sonderforschungsbereich TRIP-Matrix-Composite Verbundwerkstoffe, 17. Symposium Verbundwerkstoffe und Werkstoffverbunde (2009) pp. 39-45 DGM Deutsche Gesellschaft für Materialkunde e. V., WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim


Crack propagation simulations in piezoelectric structures with an efficient adaptive finite element tool Proceedings of the 12th International Conference on Fracture, Ottawa, July 12-17 (2009)

237 JANSKI, L., STEINHORST, P., KUNA, M.

Crack propagation simulations in piezoelectric structures with an efficient adaptive finite element tool Proceedings of the IUTAM Symposium Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials Systems Freiberg, September 1-4 (2009)




236 KIYAK, Y., KLINGBEIL, D., ENDERLEIN, M., KUNA, M.

Vergleichende Untersuchungen zum J-Integral Postprozessoren bei statischen und dynamischen Rissbeanspruchungen 41. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 241 (2009) pp. 293-303

235 KUNA, M.

Bruchmechanische Konzepte und Prüfverfahren für piezoelektrische Materialien 41. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 241 (2009) pp. 313-328

234 KUNA, M., WIPPLER, K.

Three-dimensional piezoelectric fracture mechanics with boundary elements 1st African Conference on Computational Mechanics, Sun City, South Africa, AfriComp (2009)

233 KUNA, M., WIPPLER, S.

A cyclic viscoplastic and creep damage model for lead free solder alloys Proceedings of the 12th International Conference on Fracture, Ottawa, July 12-17 (2009)

232 LEIBELT, TH., ENDERLEIN, M., WIPPLER, S., VÖLZER, W., KUNA, M.

Anwendung bruchmechanischer Analysewerkzeuge auf Fallversuche von Transportbehältern 41. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 241 (2009) pp. 31-43

231 LI, Q., ENDERLEIN, M., KUNA, M.

Micromechanical simulation of ferroelectric domain switching at cracks Proceedings of the IUTAM Symposium Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials Systems Freiberg, September 1-4 (2009)

230 LIEDKE, T., AMS, A., KUNA, M.

Experimental and numerical investigation of the wire sawing process Freiberger Forschungsforum, 60. BHT, Freiberger Silicon Days June 17-19 (2009)


FE simulation of the CMP process Freiberger Forschungsforum, 60. BHT, Freiberger Silicon Days June 17-19 (2009)

228 MOTTITSCHKA, T., HOFFMANN, M., PUSCH, G., BIERMANN, H., ZYBELL, L., KUNA, M.

Einfluss variabler Lastamplituden auf das Ermüdungsrisswachstum in Gusseisen mit Kugelgraphit – Experimentelle und numerische Untersuchungen F.J. Schmidt (editor): Anwendungen und Fortschritte in der Bruch- und Schädigungsmechanik (2009) pp. 51–63

227 MOTTITSCHKA, T., PUSCH, G., BIERMANN, H., ZYBELL, L., KUNA, M., HÜBNER, P.




Der Einfluss variabler Lastamplituden auf das Ermüdungsrisswachstum in Gusseisenwerkstoffen mit Kugelgraphit – Experimentelle und numerische Untersuchungen 9. Tagung – Gefüge und Bruch, Leoben (2009)

226 MÜHLICH, U., ZYBELL, L., KUNA, M. Modeling of failure in porous elastic solids using strain gradient theory Proceeding of the 1stConference on Material Modelling, Dortmund, Germany ( 2009)


Simulation of size effects in failure of porous elastic solids using strain gradient elasticity in conjunction with a statistical approach Proceedings of the 12th International Conference on Fracture, Ottawa, July 12-17 (2009)


FE-Simulation von duktilem Risswachstum Anwendungen und Fortschritte in der Bruch- und Schädigungsmechanik, Prof. Dr.-Ing. habil. Holger Theilig zum 65. Geburtstag gewidmet. Herausgeber: Fritz J. Schmidt (2009) pp. 89-98


Three-dimensional micromechanical modelling of nonlinear ferroelectric constitutive behaviour and application to cracks and electrode interfaces Proceeding of the 1st Conference on Material Modelling; Dortmund, Germany, September (2009)

222 ZYBELL, L., KUNA, M., MOTTITSCHKA, T., HOFFMANN, M., PUSCH, G. UND BIERMANN, H.

Experimentelle und numerische Untersuchungen des Ermüdungsrisswachstums von Gusseisen mit Kugelgraphit 41. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 241 (2009) pp. 373–387

221 BIERMANN, H., PUSCH, G., KUNA, M., MOTTITSCHKA, T., ZYBELL, L.

DFG-Zwischenbericht Projekt BI 418/16-1 – KU 929/13-1 TU Bergakademie Freiberg, Institut für Mechanik und Fluiddynamik (2009)

220 ZYBELL, L., ENDERLEIN, M., KUNA, M.

Qualifikation des spröden Gusswerkstoffes EN GJS-700-2U Abschlussbericht zu Teilprojekt 1 – Statischer Bruchmechaniknachweis Bericht Industrieprojekt, TU Bergakademie Freiberg, Institut für Mechanik und Fluiddynamik (2009)




2008 219 KUNA, M.

Numerische Beanspruchungsanalyse von Rissen FEM in der Bruchmechanik Vieweg-Teubner Verlag (2008) 446 Seiten ISBN: 978-3-8351-0097-8

218 BECHET, E., SCHERZER, M., KUNA, M.

Fracture of piezoelectric materials with the X-FEM European Journal of Computational Methods 17 (2008) pp. 637-649


Usage of the small-punch-test for the characterisation of reactor vessel steels in the brittle-ductile transition region Engineering Fracture Mechanics 75 (2008) pp. 3520-3533


Simulation of failure in porous elastic solids incorporating size effects Proceedings 17th European Conference on Fracture, Brno (2008) (Ed.: J. Pokluda et al.), VUTIUM Brno, Czech Republic, CE170305


Interaction integrals for fracture analysis of functionally graded magnetoelectroelastic materials International Journal of Fracture 153 (2008) pp. 15–37


Interaction integrals for fracture analysis of functionally graded piezoelectric materials International Journal of Solids and Structures 45 (2008) pp. 5237-5257

213 RAO, B.N., KUNA, M.

Erratum to Interaction integrals for fracture analysis of functionally graded piezoelectric materials" International Journal of Solids and Structures 47 (2008) pp. 5237-5257


The thermoelectromechanical J-integral and the thermal permeability of cracks Key Engineering Materials 385-387 (2008) pp. 569-572

211 WIPPLER, S., KUNA, M.

Experimental and numerical investigation on the reliability of leadfree solders Engineering Fracture Mechanics 75 (2008) pp. 3534-3544 DOI: 10.1016/j.engfracmech.2007.03.046

210 BIERMANN, H., ANEZIRIS, C.G., KUNA, M.

TRIP-Matrix-Composite DGM-Tagung Verbundwerkstoffe, Bayreuth (2008)

209 JANSKI, L., KUNA, M., MEYER, A., SCHERZER, M., STEINHORST, P.

Ein effizientes Finite-Elemente-Werkzeug zur Simulation von Rissausbreitung in piezoelektrischen Strukturen Absicherung der Systemzuverlässigkeit (Hrsg. H. Hanselka).




DVM-Bericht 902, 2.Tagung des DVM-Arbeitskreises Zuverlässigkeit mechatronischer und adaptronischer Systeme, Koblenz (2008) pp. 149-158

208 KUNA, M. Fracture mechanics of piezoelectric materials and structures Proceedings 17th European Conference on Fracture, Brno (2008) (Ed.: J. Pokluda et al.), VUTIUM Brno, Czech Republic, CE170126

207 LIEDKE, T., KERN, D., AMS, A., SCHERZER, M., KUNA, M.

Mikromechanische Simulation des Drahtsägeprozesses unter Verwendung der Diskreten-Elemente-Methode und Kriterien der Indenterbruchmechanik Bruchmechanik und Bauteilsicherheit, DVM-Bericht 240, 40.Tagung des DVM-Arbeitskreises Bruchvorgänge, Stuttgart (2008) pp. 131-140

206 RAO, B, N., KUNA, M.

Fracture analysis of functionally piezoelectric graded materials GAMM-Tagung Bremen, April (2008)


Bestimmung von Verformungs- und Versagenseigenschaften spröd-duktiler Werkstoffe bei tiefen Temperaturen mit dem Small-Punch-Test Bruchmechanik und Bauteilsicherheit, DVM-Bericht 240, 40.Tagung des DVM-Arbeitskreises Bruchvorgänge, Stuttgart (2008) pp. 63-72

204 WIPPLER, S., KUNA, M.

Constitutive Modelling of lead free solders 79. Annual Meeting of the Gesellschaft für Angewandte Mathematik und Mechanik e. V. Bremen (2008) 31 March - 4 April

203 WÜNSCHE, M., ZHANG, C., GARCIA-SANCHEZ, KUNA, M.

Eine vergleichende Studie von zwei Zeitbereichs- Randelementmethoden zur dynamischen Rissanalyse in anisotropen Werkstoffen. In: Bruchmechanik und Bauteilsicherheit, DVM-Bericht 240, 40.Tagung des DVM-Arbeitskreises Bruchvorgänge, Stuttgart (2008) pp. 279-288


FE-implementation of plane strain gradient elasticity constitutive equations obtained by homogenization Proceedings Applied Mathematics Mechanics PAMM (2008)


Implementierung von Gradientenelastizität über die Schnittstelle UEL 20. Deutschsprachige Abaqus-Benutzerkonferenz, Bad Homburg (2008)

200 KUNA, M., RICOEUR, A., ENDERLEIN, M, JANSKI, L.

Calculation of critical crack lengths at the mainframe (HP hotspots) Abschlussbericht zum Industrieprojekt (2008)

199 KUNA, M., RICOEUR, A., ENDERLEIN, M.

Validation of finite element tools for the calculation of fatigue crack growth rates at the welded 15 MW main frames Parts 1 & 2 Zwischenbericht zum Industrieprojekt (2008)





Festkörpermechanische Simulation und Optimierung der Beanspruchung beim CM-Polieren Institutsbericht zum Industrieforschungsprojekt TU Bergakademie Freiberg (2008)

197 RASCHE, S., KUNA, M., PÖNITZ M., SCHERZER, M., KOCH, F., HÜBNER, P., KRÜGER, L.,

PIETRZYK, M., GAWAD, J. Untersuchung des Festigkeitsverhaltens beim Schweißen von druckbelasteten Gasdruckleitungenmit den zugehörigen Einflussgrößen für das beanspruchungsgerechte Gestalten von Abzweigen Abschlussbericht zum Industrieprojekt (2008)




2007 195 KUNA, M.

Bruchmechanik und Bauteilsicherheit DVM-Bericht 239 39. Tagung des DVM-Arbeitskreises Bruchvorgänge, Dresden (2007)

194 EMRICH, A., MÜHLICH, U., KUNA, M., LUDWIG, A., TRUBITZ, P.

Indirect measuring of crack growth by means of a Key-Curve-Method in pre-cracked Charpy specimens consisting of nodular cast iron International Journal of Fracture 145 (2007) pp. 47-61

193 KUNA, M.

Finite element analyses of cracks in piezoelectric structures Key Engineering Materials 348-349 (2007) pp. 629-632

192 LIEDKE, T., AMS, A., KUNA, M.

Investigations on the wire sawing process Proceedings in Applied Mathematics and Mechanics PAMM Proceedings in Applied Mathematics and Mechanic (2007)

191 WESTRAM, I., RICOEUR,A., EMRICH, A., RÖDEL, J., KUNA, M.

Fatigue crack growth law for ferroelectrics under cyclic electrical and combined electromechanical loading Journal of the European Ceramics Society 27 (2007) pp. 2485-2494

190 WÜNSCHE, M., BEYER, S., ZHANG CH., KUNA, M.

2D dynamische Rissanalyse in anisotropen Werkstoffen mit einer hypersingulären Zeitbereichs-Randelementmethode Materialprüfung/Materials Testing 10 (2007) pp. 534-541


Application de la méthode des éléments finis étendus à la simulation de la rupture pourles matériaux piezoélectriques Etude de différents enrichissements et convergence. 8e colloque national en calcul des structures, le 24 janvier (2007) Giens, France

188 ENDERLEIN, M., KUNA, M., RICOEUR, A.

A Micromechanical Material Model for Ferroelectrics and its Application to Crack Problems Proceedings of the First Seminar on The Mechanics of Multifunctional Materials Bad Honnef May 2007, J. Schröder, D. Lupascu, D. Balzani (Eds.) Report No. 5 Institute of Mechanics, Faculty for Engineering Sciences, Division Civil Engineering, University of Duisburg-Essen (2007) pp. 21-25


Modellierung von Risswachstum in piezoelektrischen Materialien mittels moderner adaptiver FEM-Lösungsstrategien Bruchmechanik und Bauteilsicherheit (Hrsg. M. Kuna), DVM-Bericht 239 39.Tagung des DVM-Arbeitskreises Bruchvorgänge (2007) pp. 297-306 Dresden





Modellierung von Risswachstum in piezoelektrischen Materialien mittels moderner adaptiver FEM-Lösungsstrategien Proceedings of the First Seminar on The Mechanics of Multifunctional Materials Bad Honnef May 2007, J. Schröder, D. Lupascu, D. Balzani (Eds.) Report No. 5 Institute of Mechanics, Faculty for Engineering Sciences, Division Civil Engineering, University of Duisburg-Essen (2007) pp. 52-55

185 KUNA, M.

Finite-Element-Analyse von Rissproblemen bei linear-elastischem Materialverhalten DVM-Weiterbildungsseminar „Anwendung numerischer Methoden in der Bruchmechanik" Dresden (2007) Bericht 1, pp. 1-28


Application of the small-punch-test to irradiated reactor vessel steels in the brittle-ductile transition region ASTM E10 Fifth Symposium on Small Specimen Test Techniques, Costa Mesa, CA, USA (2007)


Charakterisierung von Reaktorstählen im spröd-duktilen Übergangsbereich mit dem Small-Punch-Test 33. MPA-Seminar (2007) pp. 3.1-18


Numerische und analytische dreidimensionale Fundamentallösungen für Piezoelektrika zur Anwendung in der BEM Proceedings of the First Seminar on The Mechanics of Multifunctional Materials Bad Honnef May 2007, J. Schröder, D. Lupascu, D. Balzani (Eds.) Report No. 5 Institute of Mechanics, Faculty for Engineering Sciences, Division Civil Engineering, University of Duisburg-Essen (2007) pp. 52-55

181 WÜNSCHE, M., ZHANG, C., KUNA, M.

Dynamische Rissanalyse in anisotropen Verbundwerkstoffen mit einer Zeitbereichs-Randelementmethode Bruchmechanik und Bauteilsicherheit (Hrsg. M. Kuna) 39.Tagung des DVM-Arbeitskreises Bruchvorgänge, Dresden (2007) pp. 297-306 DVM-Bericht 239

180 KUNA, M., RICOEUR, A., WIPPLER, K.

Bruchmechanische Berechnung kritischer Risslängen im geschweißten Grundrahmen einer 15 MW Windkraftanlage Abschlussbericht zum Industrieprojekt (2007)




2006 179 KUNA, M.

Fortschritte in der Bruch- und Schädigungsmechanik DVM-Bericht 238 38. Tagung des DVM-Arbeitskreises Bruchvorgänge, Aachen (2006)

178 KUNA, M., POHL, N.

Julius L Weisbach (1806-1871) Gedenkschrift zu seinem 200 Geburtstag Freiberger Forschungsforum 57. Berg- und Hüttenmännischer Tag 2006, Freiberger Forschungshefte D 222, ISBN 3-86012-278-9, Freiberg (2006)

177 ABENDROTH, M., KUNA, M.

Identification of ductile damage and fracture parameters from the small punch test using neural networks Engineering Fracture Mechanics 6 (2006) pp. 710-725 DOI: 10.1016/j.engfracmech.2005.10.007

176 KUNA, M.

Finite element analyses of cracks in piezoelectric structures - a survey Archive of Applied Mechanics 76 (2006) pp. 725-745 DOI 10.1007/s00419-006-0059-z


Bestimmung von Verformungs- und Festigkeitseigenschaften mit dem Small-Punch-Test: Identifikation von Fließkurven und Materialkennwerten des Sprödbruchs bei tiefen Temperaturen VDI Berichte 1948 (2006) pp. 113-122

174 SPRINGMANN, M., KUNA, M.

Determination of ductile damage parameters by local deformation Fields Measurement and Simulation Archive of Applied Mechanics 75 (2006) pp. 775-797


Crack analyses in three-dimensional piezoelectric structures by the BEM Computational Materials Science 39 (2006) pp. 261-266


Application of the X-FEM to fracture of piezoelelectric materials Proceedings 7th World Congress on Computational Mechanics Los Angeles, USA (2006) CD ROM

171 EMRICH, A., MÜHLICH, U., KUNA, M.

Anwendung der Key-Curve-Methode zur Bestimmung von dynamischen Risswiderstandskurven Fortschritte in der Bruch- und Schädigungsmechanik (Ed.: M. Kuna) 38.Tagung des DVM-Arbeitskreises Bruchvorgänge (2006) DVM-Bericht 238




170 EMRICH, A., MÜHLICH, U., LUDWIG, A., TRUBITZ, P., KUNA, M.

Modified Key Curve-Method for determination of dynamic crack resistance curves Proceedings 16th European Conference of Fracture, Alexandropoulis Greece July (2006) E.E. Gdoutos (Ed.)

169 KUNA, M.

FEM-techniques for thermo-electro-mechanical crack analyses in smart structures IUTAM Symposium (Mechanics and Reliabilitiy of actuating materials; Ed. W. Yang) Beijing, September 2004, Springer (2006) Solid Mechanics and ist Application, Volume 127 (2006) pp. 131-143 DOI: 10.1007/1-4020-4131-4 14

168 KUNA, M.

Weisbachs Arbeiten zur Technischen Mechanik in Bezug zur heutigen Zeit Julius L. Weisbach (1806-1871), Gedenkschrift zu seinem 200. Geburtstag, Freiberger Forschungsforum 57. Berg-und Hüttenmännischer Tag 2006, Freiberger Forschungshefte D 222 Freiberg (2006) pp. 103-123

167 LINSE, T., KUNA, M., SCHUHKNECHT, J.

Usage of small-punch-test for the characterisation of reactor vessel steels in the brittle-ductile transition region Besson, J., Moinerau, D., Steglich, D. (Hrsg.): EUROMECH – MECAMAT 2006 – 9th European Mechanics of Materials Conference: Local Approach to Fracture (2006) pp. 303-308

166 RICOEUR, A. EMRICH, A., KUNA, M.

Untersuchungen zum Ermüdungsrisswachstum in ferroelektrischen Keramiken 1. Tagung DVM-AK Zuverlässigkeit mechatronischer und adaptronischer Systeme (Ed.:T. Hanselka), DVM-Bericht 901 (2006) pp. 63-72

165 RICOEUR, A. EMRICH, A., KUNA, M.

Untersuchungen zum Ermüdungsrisswachstum in ferroelektrischen Keramiken 1. Tagung DVM-AK Zuverlässigkeit mechatronischer und adaptronischer Systeme (Ed.:T. Hanselka), DVM-Bericht 901 (2006) pp. 63-72

164 RICOEUR, A., ENDERLEIN, M., KUNA, M.

Fatigue crack growth in ferroelectrics under cyclic electrical loading Proceedings of SPIE The International Society for Optical Engineering 6170, art. no. 61700C, San Diego (2006)


Determination of ductile damage parameters by local deformation fields Proceedings 16th European Conference of Fracture, Alexandropoulis, Greece July (2006) E.E. Gdoutos (Ed.), Springer Vlg. Dorthrecht 2006, 535 ff und CD ROM




162 SPRINGMANN, M., SCHERZER, M., KUNA, M., KÜHHORN, A.

Numerical simulation of localization phenomena in the frame of damage parameter identification NAFEMS Seminar: ”Materials Modeling - FE Simulations of the Behavior of Modern Industrial Materials Including their Failure” December (2006) pp. 1-12 Wiesbaden

161 WÜNSCHE, M., BEYER, S., ZHANG, CH., KUNA, M.

Dynamische Rissberechnung in anisotropen Werkstoffen mit der hypersingulären Zeitbereichs-Randelementmethode Fortschritte in der Bruch- und Schädigungsmechanik (Ed.: M. Kuna) 38.Tagung des DVM-Arbeitskreises Bruchvorgänge (2006) DVM-Bericht 238 Aachen




2005 160 KUNA, M.

Technische Sicherheit Zuverlässigkeit und Lebensdauer DVM-Bericht 237 37. Tagung des DVM-Arbeitskreises Bruchvorgänge, Hamburg (2005)

159 ENDERLEIN, M., RICOEUR, A., KUNA, M.

Finite element techniques for dynamic crack analysis in piezoelectrics International Journal of Fracture 134 (2005) pp. 191–208 DOI: 10.1007/s10704-005-0522-9

158 GROH, U., KUNA, M.

Efficient boundary element analysis of cracks in 2D piezoelectric structures International Journal of Solids and Structures 42, 8 (2005) pp. 2399-241 DOI: 10.1016/j.ijsolstr.2004.09.023

157 KUNA, M., ABENDROTH M.

Prüfung duktiler Werkstoffe mit dem Small Punch Test - Bestimmung und Übertragung schädigungsmechanischer Parameter Materialprüfung/Materials Testing 47 (2005) pp. 45-54

156 KUNA, M., SPRINGMANN, M., MÄDLER, K., HÜBNER, P., PUSCH, G.

Fracture mechanics based design of a railway wheel made of austempered ductile iron Engineering Fracture Mechanics 72 (2005) pp. 241-253


Cell model Simulation of void growth in nodular cast iron under cyclic loading Computational Materials Science 32 (2005) pp. 489-497 DOI: 10.1016/j.commatsci.2004.09.016

154 RICOEUR, A., ENDERLEIN, M., KUNA, M.

Calculation of the J-integral for limited permeable cracks in piezoelectrics Archive of Applied Mechanics 74 (2005) pp. 536 - 549


Erratum: Identification of material parameters of the Gurson-Tvergaard- Needleman model by combined experimental and numerical techniques (Computational Materials Science 32 (2005) pp.544-552) Computational Materials Science 33, 4 (2005) p. 500 DOI: 10.1016/j.commatsci.2005.02.003


Identification of material parameters of the Gurson-Tvergaard-Needleman model by combined experimental and numerical techniques Computational Materials Science 33, 4 (2005) pp. 501-509 DOI:10.1016/j.commatsci.2005.02.002


Identification of material parameters of the Gurson-Tvergaard-Needleman model by combined experimental-numerical technique Computational Materials Science 32, 3-4 (2005) pp. 544-552 DOI: 10.1016/j.commatsci.2004.09.010




150 ENDERLEIN M., RICOEUR, A., KUNA, M.

FEM-Techniken zur dynamischen Rissanalyse in piezoelektrischen Strukturen 37. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 237 (2005) pp. 167-176 Hamburg

149 ENDERLEIN, M., VÖLZER, W., RICOEUR, A., KUNA, M.

Computational dynamic fracture analysis for drop tests of shipping casks Proceedings 11. Int. Conference on Fracture, (Ed.: A: Carpinteri), Turin (2005) CD-ROM 4423

148 KUNA, M ., ENDERLEIN, M., RICOEUR, A.

Finite element analysis of cracks in piezoelectrics under dynamic electromechanical loading Advances in Computational & Experimental Engineering and Sciences (Chennai, India 2005 Ed.: S. M. Sivakumar et. al) Tech Science Press (2005) pp. 449-454

147 KUNA, M.

A review of finite element techniques to analyse 3D piezoelectric crack problems Proceedings 11. Int. Conference on Fracture (Ed.: A: Carpinteri), Turin (2005) CD-ROM 4095

146 WIPPLER S., KULLIG E., FREDERSDORF K., MIRANDA R., KUNA, M.

Experimentelle und numerische Untersuchungen zum Versagen bleifreier Lotwerkstoffe 37. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 237 (2005) pp. 301-310 Hamburg




2004 145 KUNA, M.

Fortschritte in der Bruch- und Schädigungsmechanik DVM-Bericht 236 36. Tagung des DVM-Arbeitskreises Bruchvorgänge, Köln-Porz (2004)


Determination of ductile materials properties by means of the small-punch test and neural networks Advanced Engineering Materials 6 (2004) pp. 536-540

143 FUNKE, C., KULLIG, E., KUNA, M., MÖLLER, H.-J.

Biaxial fracture test of silicon wafers Advanced Engineering Materials 6 (2004) pp. 594-598 DOI: 10.1002/adem.200400406


Efficient boundary element analysis of cracks in 2D piezoelectric structures International Journal of Solids and Structures 8 (2004) pp. 2399-2416

141 KUNA, M., GROH U.

Virtual crack closure integral in BEM-analysis of piezoelectric crack problems Computational Mechanics, WCCM VI in conjunction with APCOM'04, Sept.5-10 (2004) Beijing, China, Tsinghua University Press & Springer Verlag. CD-ROM Article M-443, Editors: Z. H. Yao, M. W. Yuan, W. X. Zhong

140 SCHERZER, M., KUNA, M.

Combined analytical and numerical solution of 2D interface corner configurations between dissimilar piezoelectric materials International Journal of Fracture 127 (2004) pp. 61-99

139 SHANG, F., KITAMURA, T., KUNA, M.

An elliptical crack in a thermopiezoelectric solid under uniform temperature gradient: Analytical development Key Engineering Materials 1 (2004) pp. 63-68


Identification of material parameters of inelastic constitutive law from displacement fields Damage and Fracture Mechanics VIII (Ed.: C.A. Brebbia, A.Varvani-Farahani) WIT Press, Southampton-Boston (2004) pp. 13-23

137 WIPPLER, K., RICOEUR, A., KUNA, M.

Towards the computation of electrically semi-permeable cracks in piezoelectrics Engineering Fracture Mechanics 71 (2004) pp. 2567-2587

136 ENDERLEIN, M., RICOEUR A., M. KUNA, M., R. HÜGGENBERG , W. VÖLZER

Bruchmechanische Beanspruchungsanalyse eines CASTOR-Behälters bei Fallversuchen 36. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 236 (2004) pp. 251-260 Köln-Porz




135 KUNA, M.

Grundlagen der Schädigungsmechanik DVM-Weiterbildungsseminar "Grundlagen und Anwendung der Schädigungsmechanik" Köln (2004) Bericht 1, pp. 1-64

134 KUNA, M., ABENDROTH, M.

Identification and validation of ductile damage parameters by the small punch test Proceedings 15th European Conference of Fracture (CD ROM, Ed.: F. Nilsson) (2004) Stockholm

133 RABOLD, F., MEYER, A., SCHERZER, M., KUNA, M.

Finite-Element-Simulation von Risswachstum mittels effizienter adaptiv-iterativer Solver 36. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 236 (2004) pp. 171-182 Köln-Porz

132 KREIßIG, R.; MEYER, A.; KUNA, M.

Effiziente parallele Algorithmen zur Simulation des Deformationsverhaltens von Bauteilen aus elastisch-plastischen Materialien TU Chemnitz, Sonderforschungsbereich 393: Numerische Simulation auf massiv parallelen Rechnern SFB-Bericht (2002-2004) Teilprojekt D1, pp. 221-258

131 KUNA, M., GROH, U.

Entwicklung von Randelementmethoden zur elektromechnischen Festigkeitsanalyse von piezoelektrischen Strukturen mit Defekten DFG-Forschungsbericht, TU Bergakademie Freiberg (2004)

130 RADEKE, C., STOYAN, D., KUNA, M.

Kraftflussprobleme in Kugelpackungen und Brucheigenschaften spröder Partikel Abschlussbericht Sonderforschungsbereich 285 (Ed.: K. Husemann, K. Graichen) Freiberg (2004) Shaker Verlag, pp. 99-128




2003 129 ABENDROTH, M., KUNA, M.

Determination of deformation and failure properties of ductile materials by means of the small-punch test and neural networks Computational Materials Science 28, 3-4 (2003) pp. 633-644

128 ENDERLEIN, M., RICOEUR A., KUNA, M.

Comparison of finite element techniques for 2D and 3D crack analysis under impact loading International Journal of Solids and Structures 40 (2003) pp. 3425-3437


2D Piezoelectric Crack Analysis by Boundary Element Method Key Engineering Materials 251-252 (2003) pp. 91-96 DOI:10.4028/www.scientific.net/KEM.251-252.91


Randelementmethoden zur elektromechanischen Festigkeitsanalyse piezoelektrischer Strukturen PAMM Proceedings in Applied Mathematics and Mechanic 2 (2003) pp. 208-209

125 JACKEWIECZ, J., KUNA, M.

Non-Local regularization for FE simulation of Damage in ductile materials Computational Materials Science 28 (2003) pp. 684-695


A micromechanical model for the fracture process zone in ferroelectrics Computational Materials Science 27 (2003) pp. 235-249


Influence of electric fields on the fracture of ferroelectric ceramics Journal of the European Ceramic Society 23 (2003) pp. 1313-1328


Influence of the fracture process zone in ferroelectrics on the effective fracture toughness Proceedings of SPIE - The International Society for Optical Engineering (2003) pp. 395-404


An elliptical crack in thermo-piezoelectric solids under uniform temperature gradient: analytical development Key Engineering Materials 261-263, Advances in Fracture and Failure Prevention (2003) pp. 63-68


Theoretical investigations of an elliptical crack in thermopiezoelectric material Part II: Crack propagation Theoretical and Applied Fracture Mechanics 40 (2003) pp. 247-253

119 SHANG, F., KUNA, M.

Thermal stress around a penny shaped crack in a thermopiezoelectric solid




Computational Materials Science 26 (2003) pp. 197-201 118 SHANG, F., KUNA, M., KITAMURA, T.

Theoretical investigations of an elliptical crack in thermopiezoelectric material Part I: Analytical development Theoretical and Applied Fracture Mechanics 40 (2003) pp. 237-246

117 SHANG, F., KUNA, M., ABENDROTH, M.

Finite element analyses of three-dimensional crack problems in piezoelectric structures Engineering Fracture Mechanics 70 (2003) pp. 143-160

116 SHANG, F., KUNA, M., SCHERZER, M.

Development of finite element techniques for three-dimensional analyses of crack problems in thermopiezoelectric materials ASME Trans. J. Eng. Materials & Technology 125 (2003) pp. 18-21


Identification of material parameters of Rousselier model by non-linear optimization Computational Materials Science 26 (2003) pp. 202-209


Bestimmung von Verformungs- und Versagenseigenschaften duktiler Werkstofe aus dem Small-Punch-Test 35. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 235 (2003) pp. 269-278 Freiburg

113 ENDERLEIN, M., KLEIN, K., KUNA, M., RICOEUR, A.

Numerical fracture analysis for the structural design of CASTOR casks 17. International Conference Structural Mechanics in Reactor Technology SMIRT, Prague (2003) Prag, G042

112 ENDERLEIN, M., KUNA, M., RICOEUR, A., BAER, W., MÜLLER, K., KLEIN, K., WINKLER, H.P.

Numerische Analyse des Stoßbiegeversuchs zur Ermittlung der dynamischen Bruchzähigkeit 35. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 235 (2003) pp. 259-268 Freiburg


Boundary element computing in 2-D crack analysis of piezoelectric structures BETECH03 Detroit (USA)

110 KUNA, M., WULF, H., RUSAKOV, A., PUSCH, G., HÜBNER, P.

Entwicklung und Verifikation eines bruchmechanischen Bewertungssystems für Hochdruck-Ferngasleitungen 35. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 235 (2003) pp. 153-162 Freiburg

109 ABENDROTH, M., GROH, U., KUNA, M., RICOEUR, A.

Finite element-computation of the electromechanical J-integral for 2-D and 3-D crack analysis




International Journal of Fracture 114 (2002) pp. 359-378 DOI:10.1023/A:1015725725879

108 KUNA, M., SPRINGMANN, M., MÄDLER, K., HÜBNER, P., PUSCH, G. Anwendung bruchmechanischer Bewertungskonzepte bei der Entwicklung von Eisenbahnrädern aus bainitischem Gusseisen Konstruieren & Gießen 27 (2002) pp. 27-32

107 RADEKE, CH., KUNA, M., STOYAN, D.

Mechanical and statistical analysis of loaded sphere packings by means of FEM Numerical modeling in micromechanics via particle methods (Ed. : H. Konietzky) Proceedings 1st PFC-Symposium, Gelsenkirchen, Balkema Publ., (2002) pp. 13-18


A finite element procedure for three-dimensional analyses of thermopiezoelectric structures in static application Technische Mechanik 22 (2002) pp. 235-243


Analytical solutions for two penny-shaped crack problems in thermopiezoelectric materials and their finite element comparison International Journal of Fracture 117 (2002) pp. 113-128

104 KUNA, M.

Einführung in die Finite-Element-Techniken zur Analyse von Rissproblemen bei linear-elastischem Materialverhalten DVM-Weiterbildungsseminar "Anwendung numerischer Methoden in der Bruchmechanik" Freiberg (2002) Bericht 1, pp. 1-43

103 KUNA, M., SPRINGMANN, M., MÄDLER, K., HÜBNER, P., PUSCH, G.

Anwendung bruchmechanischer Konzepte bei der Auslegung von ADI-Eisenbahnrädern 34. Tagung Arbeitskreis Bruchvorgänge Freiberg DVM-Bericht 234 (2002) pp. 139-150

102 KUNA, M., WULF, H., RUSAKOV A., HÜBNER, P., PUSCH, G., HOFFMANN, U.

Ein computergestütztes bruchmechanisches Bewertungssystem für Hochdruck- Ferngasleitungen 28. MPA-Seminar, Stuttgart (2002) pp. 4/1- 4/20


Theoretical investigation of fracture behaviour in ferroelectric ceramics 7th International Symposium on Fracture Mechanics of Ceramics, 20-22 July, Moskau 1999 In: Fracture Mechanics of Ceramics (Ed.: R.C: Bradt et al) Kluwer, New York (2002) pp. 63-82

100 GROH, U., KUNA, M

Entwicklung von Randelementmethoden zur elektromechanischen Festigkeitsanalyse von piezoelektrischen Strukturen mit Defekten Forschungsbericht DFG-Projekt Ku 929/4 (2002)





Identifikation schädigungsmechanischer Materialparameter mit Hilfe nichtlinearer Optimierungsverfahren am Beispiel des Rousselier-Modells Sonderforschungsbereich 393: Numerische Simulation auf massiv parallelen Rechnern Preprint (2002) p. 08




2001 98 ZHENG, M., ZHOU, G., ZACHAROPOULOS, D., A., KUNA, M.

Crack initiation behavior in StE690 steel characterized by strain energy density criterion Theoretical and Applied Fracture Mechanics 36 (2001) pp. 141-145

97 JACKEWIECZ, J., KUNA, M., SCHERZER, M.

Non-local approach for Damage Simulation in Ductile Materials Proceedings 14th Nordic Seminar on Computational Mechanics (Eds.: L Beldie, et al.), Lund, Sweden, (2001) pp. 200-203

96 KUNA, M., RICOEUR, A.

Simulation of domain switch-toughening in ferroelectric ceramics Proceedings of the 10th International Conference on Fracture ICF10 (CD ROM), Ed.: K. Ravi-Chandar et al., Pergamon Press (2001) Honululu

95 KUNA, M., SCHERZER, M.

Bruchmechanische Beanspruchungsanalyse von Rissen in adaptiven piezoelektrischen Verbundwerkstoffen 33. Tagung Arbeitskreis Bruchvorgänge DVM-Bericht 233 (2001) pp. 57-66 Paderborn


Coupling of Asymptotic Solutions with Finite Elements at Interface Configurations in Piezoelectric Composites Proceedings of the 10th International Conference on Fracture ICF10 (CD ROM), Ed.: K. Ravi-Chandar et al.,Pergamon Press, Honululu (2001)


Development of finite element techniques for three-dimensional analyses of crack problems thermopiezoelectric materials Proceedings EUROMECH COLLOQUIUM 429: Computational and Experimental Mechanics of Advanced Materials, (Ed.: H. Böhm) Wien, September (2001)

92 WULF, H., BRECHT, K., HOFFMANN, KUNA, M.

Computergestütztes bruchmechanisches Bewertungssystem für die Bruchsicherheit von Hochdruck-Ferngasleitungen 16. Rohrleitungstechnische Tagung SDBR, Gelsenkirchen (2001) pp. 1-9


Elektromechanische Modellierung und Bewertung der Festigkeit von Verbundwerkstoffen mit integrierten Piezokeramiken Wissenschaftlicher Bericht im Rahmen der Förderung innovativer Forschung (Projektnummer: 4-7566-70-0390-98/4, SMWK Dresden), 34 Seiten (2001)




2000 90 ZHENG, M., LAUSCHKE, U., KUNA, M.

A damage mechanics based approach for fracture of metallic components Computational Materials Science 19 (2000) pp. 170-178

89 KUNA, M.

Numerical analysis of fracture in smart composite structures Proceedings Fracture and Damage Mechanics VI, (Ed.: A. P. S. Selvadurai, C.A. Brebbia) Montreal (2000) Computational Mechanics Publications Southhampton, pp. 23-33

88 KUNA, M., RICOEUR, A.

Theoretical investigations on the cracking of ferroelectric ceramics Proceedings of SPIE’s 7th International Symposium on Smart Structures and Materials Ed.: C.S. Lynch, Vol. 3992 New Port Beach Cal (2000) pp. 185-196

87 KUNA, M., SCHERZER, M., RICOEUR, A.

Finite element techniques for flaw analysis in piezoelectric micro-components In Proceedings of the 3rd International Micro Materials Conference, Ed. B. Michel et al., Berlin (2000) pp. 488-495

86 LAUSCHKE, U., KUNA, M.

Bestimmung von Verformungs- und Versagenseigenschaften duktiler Werkstofe aus dem Small-Punch-Test 32. Tagung DVM AK Bruchvorgänge, Berlin (22.-23. Febr 2000) pp. 367-376


Numerical analyses of cracks in piezoelectric composite structures under electromechanical loading 13. European Conference on Fracture, 6th – 9th September (2000) San Sebastian, Spain, CD – Scherzer/Kuna 1–8




1999 84 KUNA, M.

An energy balance integral for cracks in heterogenoeus structures under electromechanical loading Materials Mechanics, Fracture Mechanics, Micro Mechanics, (Ed.:T. Winkler, A. Schubert), Berlin/Chemnitz (1999) pp. 441-448


Theoretical investigation of fracture behaviour in ferroelectric ceramics 7th International Symposium on Fracture Mechanics of Ceramics, 20-22 July, Moskau 1999 In: Fracture Mechanics of Ceramics (Ed.: R.C: Bradt et al) Kluwer, New York (2002) pp. 63-82

82 RICOEUR, A., KUNA, M., FÖRDERREUTHER, A., THURN, G.

Konzeption und Interpretation elektromechanischer DCB- und CT-Versuche an Funktionskeramiken 31. Tagung DVM Arbeitskreis Bruchvorgänge, Darmstadt (1999) pp. 339-348


Asymptotic analysis of Interface Problems in piezoelectric composite materials Proceedings 1st Caesarium “Smart Materials”, Bonn (1999) In: Smart Materials (Ed.: K.H. Hoffmann), Springer Vlg. (2001) pp. 137-148




1998 80 KUNA, M.

Finite element analyses of crack problems in piezoelectric structures Computational Materials Science 13 (1998) pp. 67-80

79 KUNA, M.

Risse in piezoelektrischen Strukturen unter mixed-mode elektromechanischen Beanspruchungen 30. Tagung DVM Arbeitskreis Bruchvorgänge, Dresden, Februar (1998) pp. 353-362

78 KUNA, M.

An Energy Balance Integral for Cracks in Heterogeneous Structures Under Electromechanical Loading Materials Mechanics – Fracture Mechanics – Micromechanics, FhIZM Berlin (1998)

77 KUNA, M., ROOS, E.

Cell model analyses of the void behaviour under plastic cyclic loading Proceedings Fracture and Damage Mechanics V, 1998 (ed.: C.A. Brebbia, A. Carpintieri), Bologna Computational Mechanics Publications Southhampton (1998) pp. 585-594

76 KUNA, M., ROOS, E.

The behaviour of micro-voids under cyclic plastic deformation – a theoretical study (Vortrag) 8th International Workshop Computational Mechanics of Materials MPA Stuttgart, (08.-09.10. 1998)

75 KUNA, M., SCHERZER, M., ABENDROTH, M.

Finite element modelling of adaptive composites with integrated piezoelectric fibres Proceedings NAFEMS – Seminar “FEM-applications for adaptive structural systems, Magdeburg (1998) pp. 8-14




1997 74 KUNA, M.

FEM-Techniken zur Analyse von Rissen unter elektrischen und mechanischen Beanspruchungen 29. Tagung DVM Arbeitskreis Bruchvorgänge, Stuttgart (Februar 1997) pp. 369-379

73 KUNA, M.

Numerical Analysis of electromechanically loaded defects in smart ceramic materials Proceedings 2. Conference Smart Mechanical Systems, Magdeburg (März 1997) pp. 21-32

72 ROOS, E., KUNA, M.

Analytische Ermittlung des Bruchverhaltens austenitischer Rohrleitungen – local approach MPA/VGB – Forschungsvorhaben 5.4.1, Teilbericht 1997

71 ROOS, E., KUNA, M.

Analytische Ermittlung des Bruchverhaltens ferritischer Primärkreiskomponenten – local approach MPA/VGB – Forschungsvorhaben 5.4.2, Teilbericht 1997




1996 70 KUNA, M., SUN, D. Q.

Analyses of void growth and coalescence in cast iron by cell models Journal de Physique IV , Colloque C6 (1996) pp. 113-122

69 KUNA, M., SUN, D. Q.

Three-dimensional cell model analyses of void growth in ductile materials International Journal of Fracture 81 (1996) pp. 235-258




1995 68 KUNA, M.

Energiebilanzintegrale für Risse in piezoelektrischen Werkstoffen unter kombinierten elektrischen und mechanischen Beanspruchungen Technische Mechanik 15 (1995) pp. 195-204

67 KUNA, M.

An energy balance integral for cracks in heterogeneous structures under electromechanical loading Ein Energiebilanzintegral für Risse in heterogenen Strukturen unter elektromechnischer Beanspruchung DVM-Tagung MicroMaterials, Berlin November (1995) pp. 341-348

66 KUNA, M.

Werkstoffmechanische Problemstellungen bei adaptiven Strukturen Kolloquiumsbericht "Adaptive mechanische Systeme I" (1995) Magdeburg




1994

65 HEINZELMANN, M., KUNA, M.

Ein Bruchkriterium für Spitzkerben in Einkristallinem Silizium 26. Tagung des DVM-Arbeitskreises "Bruchvorgänge" (1994) Magdeburg

64 HEINZELMANN, M., KUNA, M., BUSCH, M.

FEM and BEM analyses of notch stress intensity factors in anisotropic materials European Conference on Fracture ESIS 10, Berlin (1994)

63 LUKAS, M., KUNZ, L., KNESL, Z., KUNA, M. Effect of notch triaxiality on fatigue/creep lifetime Interantional Conference Biaxial/Multiaxial Fatigue, St.Germain en Laye, France, Vol. I (1994)




1993 62 KUNA, M., SCHÄUBLE, R., MASCHKE, H., G.

Numerical simulation of thermal fatigue crack pattern formation by BEM 12th International Conf. Structural Mechanics in Reactor Technology Stuttgart, Vol A (1993) pp. 69-74




1992 61 BUSCH, M., KUNA, M., STUMPFROCK, L., WEBER, U.

Bruchmechanische Analyse eines Notkühlsimulationsversuchs mittels Gewichtsfunktionen MPA-Seminar Stuttgart (1992) pp. 21.1-21.18

60 BUSCH, M., MASCHKE, H., KUNA, M.

Numerical calculation of fracture mechanical weight functions for cracks in finite bodies European Conference on Fracture, Reliability and structural integrity of advanced materials (Ed.:S. Sedmak et al), Varna Bulgaria, Vol. II (1992 ) pp. 1087-1092




1991 59 KUNA, M., RAJIYAH, H., ATLURI, S. N.

Response: Discussion of a new approach to determine weight functions from bueckner's fundamental field by the superposition technique by M.H. Aliabadi and D.P. Rooke International Journal of Fracture 47 (1991) pp. R61-R62

58 MASCHKE, H., BUSCH, M., KUNA, M., EISENTRAUT, U., M.,

Numerische Berechnung bruchmechanischer Gewichtsfunktionen für elastische Rißprobleme Symposium "Verformung und Bruch" Magdeburg, Plenarvortrag (1991) pp. 171-175




1990 57 KUNA, M., RAJIYAH, H., ATLURI, S. N.

A new approach to determine weight functions from BUECKNER's fundamental field by the superposition technique

International Journal of Fracture 44 (1990) pp. R57‑R64

56 RICHARD, A., KUNA, M.

Theoretical and experimental study of superimposed fracture modes I II and III

Engineering Fracture Mechanics 35 (1990) pp. 949‑960

55 BUSCH, M., MASCHKE, H.-G., KUNA, M.

A novel BEM approach to weight functions based on Bueckner`s fundamental fields Proceedings 5th Int. Conf. Numerical Methods in Fracture Mechanics (Ed.: A.R.

Luxmoore, D.R.J. Owen, Freiburg (1990) pp. 5‑16

54 HANTSCHEL, TH., BUSCH, M., KUNA, M., MASCHKE, H.

Solution of elastic‑plastic crack problems by an advanced boundary element method

Proceedings 5th Int. Conf. Numerical Methods in Fracture Mechanics (Ed.: A.R.

Luxmoore, D.R.J. Owen), Freiburg (1990) pp. 29‑40

53 KUNA, M., GUTH, W., NGUYEN-HUY, T.

Numerische Analyse des duktilen Rißwachstums an einem vereinfachten

Stutzenmodell bei Thermoschock‑Druck‑Belastung

16. MPA‑Seminar, Stuttgart (1990) Beitrag 43

52 KUNA, M.

Entwicklung und Anwendung effizienter numerischer Verfahren zur bruchmechanischen Beanspruchungsanalyse am Beispiel hybrider finiter Elemente

Dissertation B (Habilitation) Martin‑Luther‑Universität Halle‑Wittenberg, September

(1990)




1989 51 KUNA, M., ZWICKE, M.

A mixed hybrid finite element for three‑dimensional elastic crack analysis

International Journal of Fracture 45 (1989) pp. 65‑79




1988 50 BAHR, H.,J., BALKE, H., KUNA, M., LIESK, H., MASCHKE, H., MEISSNER, G., WEISS, H. J.

Bruchmechanische Analyse der Ein‑und Mehrfachrißausbreitung unter

Thermoschockbelastung Festkörpermechanik "Festigkeitsprobleme und Materialverhalten"

Bd. C, LXXII/1‑8, Dresden (1988)

49 EISENTRAUT, U., M., KUNA, M.

Ein allgemeines Verfahren zur J‑Integralbestimmung von 2D‑ und 3D‑ Rissproblemen

Beiträge der Tagung Festkörpermechanik "Festigkeitsprobleme und Materialverhalten"

Bd. C, LXXII/1‑8, Dresden (1988)

48 EISENTRAUT, U., M., KUNA, M., PETERSILGE, M.

Verfahren zur Bestimmung der Spannungsintensitätsfaktoren mit Hilfe des FEM‑Programmsystems FRACTURE Symposium "Verformung und Bruch"

06.‑08.09.1988

Magdeburg 47 KUNA, M., MASCHKE, H., EISENTRAUT, U. M., BUSCH, M., PETER-SIL-GE, M.

Ausarbeitung Entwicklung und Anwendung von Software zur bruchmechanische

Beanspruchungsanalyse von KKW‑Komponenten

FE‑Bericht A4, IFE Halle (1988) p. 96




1987 46 BAHR, H., BALKE, H., KUNA, M., LIESK, H.

Fracture analysis of a single edge cracked strip under thermal shock Theoretical and Applied Fracture Mechanics 8 (1987) pp. 33-39

45 KUNA, M., BAHR, H., A., MASCHKE, H., G., WEISS, H., J.

Analytical and numerical study of thermoshock induced fracture by single and multiple crack growth

SMIRT9 , Lausanne, Vol. A. (1987) pp. 149‑154

44 KUNA, M., EISENTRAUT, U., KNESL, Z.

Efficient finite element techniques for crack problems

Proceedings 1st Conf. on Mechanics, Prague (1987) pp. 52‑55




1986 43 EISENTRAUT, U., KUNA, M.,

Ein FEM‑Programm für ebene, axialsymmetrische und räumliche Riss‑, Festigkeits‑ und Wärmeleitprobleme

Technische Mechanik 7 (1986) pp. 51‑58

42 EISENTRAUT, U., M., KNESL, Z., KUNA, M.

Analysis of mixed mode crack problems by FEM Proceedings Conference "Math. Methods in Engineering", Kalovy Vary "

Bd. II (1986) pp. 587‑594

41 KNESL, Z., EISENTRAUT, U., KUNA, M.

Vliv teploty na rozdeleni napeti v okoli korene trhliny, (Der Einfluß von Temperaturfeldern auf die Spannungsverteilung an der Rißspitze)

Proceeding Conf. "Math. Methods in Engineering" II (1986) pp. 641‑646

Karlovy Vary (CSSR) 40 KUNA, M.

Die Analyse dreidimensionaler gemischt beanspruchter Risse mit Hilfe eines hybriden Rißelementes 18. Sitzung des DVM-Arbeitskreises Bruchvorgänge, Aachen (1986) pp. 143154

39 KUNA, M.

Literaturstudie: Zum internationalen Stand der numerischen bruchmechanischen

Analyse von thermoschock‑belasteten Reaktordruckbehältern

FE‑Bericht 6, IFE Halle, (1986) p. 46

38 SCHMIDT, MASCHKE, H., KUNA, M., BUSCH, M., HEUNEMANN, U.

Erprobung der Randintegralmethode und Anwendung auf bruchmechanische Probleme der Festigkeit von Bauteilen

FE‑Bericht G4, IFE Halle (1986) p. 36




1985 37 BUSCH, M., KUNA, M.

Ein kleinrechnerorientiertes BEM‑Programm zur Lösung räumlicher elastostatischer

Aufgaben


36 MASCHKE, H.-G., KUNA, M.

A review of boundary and finite element methods in fracture mechanics

Theoretical and Applied Fracture Mechanics 4 (1985) pp. 181‑189

35 MASCHKE, H.-G., KUNA, M., BUSCH, M., ELLIGER, R.

Bruchmechanische Berechnungen mit der Randelementmethode

VII. Symposium "Verformung und Bruch", Magdeburg, Bd. 1 (1985) pp.192‑196

34 SCHMIDT, V., KUNA, M., EISENTRAUT, U., HEUNEMANN, U.

Weiterentwicklung numerischer Methoden und ihrer Anwendung für die Beschreibung des Festigkeitsverhaltens von Werkstoffen und Konstruktionen

FE‑Bericht G4, IFE Halle (1985) p. 84




1984 33 KUNA, M.

Behandlung räumlicher Rißprobleme mit der Methode der finiten Elemente


32 KUNA, M., SCHMIDT, V.

Efficient finite element algorithm for three‑dimensional fracture problems

Advances in Fracture Research ICF 6, 2 (Ed.: S.R. VALLURI) (1984) pp. 1079‑1086

31 KNESL, Z., KUNA, M., EISENTRAUT, U., M., (IN TSCHECHISCH)

Prostorova analyza WLCT vzorku (Räumliche Analyse der WLCT-Probe) Proceedings "Numerical Methods in Physical Metallurgy", Blansko (1984)




1983 30 HENTRICH, M., THOMAS, R., KUNA, M., ORTMANN, R.

Zur Anwendung der Bruchmechanik im Armaturenbau

Technische Information Armaturen 18 (1983) 9‑13

29 KUNA, M.

Hybrid crack tip elements for 3D fracture problems Applications of Fracture Mechanics to Materials and Structures,

Freiburg 1983 (Ed.: G.C. SIH), pp. 607‑618, Martinius Nijhoff Publ.

28 KNESL, Z., KUNZ, L., KUNA, M. (IN TSCHECHISCH)

Analyza tvaru cela unavove trhliny v CT telese Analyse der Form eines Ermüdungsrisses in der CT Probe Berichte VII. CFK, Tatranske Matliare, 1983




1982 27 KUNA, M.

Konstruktion und Anwendung hybrider Rißspitzenelemente für dreidimensionale bruchmechanische Aufgaben


26 KUNA, M.

Three‑dimensional elastic analysis of CT‑specimen with straight and curved crack

fronts International Journal of Fracture 19 (1982) pp. R63-R68

25 KUNA, M., KNESL, Z., BILEK, Z.

Influence of boundary conditions on fracture mechanical behaviour of three‑point

bend specimen

Proceedings 8th Congr. on Material Testing, Budapest (1982) Vol.2 pp. 496‑500




1981 24 BILEK, Z., KUNA, M., KNESL, Z. (IN TSCHECHISCH)

Studium lokalniho ohrevu v koreni trhliny pri dynamickem zatizeni (Study of local stresses at a crack tip during dynamical loading)

Kovove Materialy 4 (1981) pp. 413‑422

23 KUNA, M., ALTENBACH, J., WILTINGER, L.

CRACK2D ‑ Ein robleme

Maschinenbautechnik 30 (1981) pp. 75‑78

22 KUNA, M., ALTENBACH, J., WILTINGER, L.

Theoretische Überlegungen zur bruchmechanischen Analyse ebener elastostatischer Rißprobleme mit der Methode der finiten Elemente

Maschinenbautechnik 30 (1981) pp. 1‑8

21 KUNA, M., BILEK, Z., KNESL , Z., SCHMIDT, V.

Theoretical and experimental study of the behavior of plane bodies with a crack in the elastic and elastoplastic regions. Communication 2. Evaluation of the cod and J-integral failure criteria Strength of Materials 6 (1981) pp. 785-790

20 KUNA, M., BILEK, Z., KNESL , Z., SCHMIDT, V. (IN RUSSISCH):

Teoretisheskoje i experimentalnoje izushenije powedenija ploskich tel s treshtshinoi w

uprugoi i uprugoi‑plastitshe skoi oblastjach Soobtshenije 2 Ocenka kriterijew

razrushenija COD i J-integral Problemy Prochnosti 6 (1981) pp. 144

19 TANAKA, H., MATSUOKA, S., SCHMIDT, V., KUNA, M.

Influence of specimen geometry on delayed retardation phenomena of fatigue crack growth in HT 80 steel and A 5083 alumina alloy

Fracture Research ICF5, Cannes 4 (1981) pp. 1789‑1798

18 KNESL, Z., BILEK, Z., KUNA, M., SCHMIDT, V.

The calculation of temperature rise at a crack tip by finite element method

Berichte IX. IKM Kongreß, Weimar, Bd. 5 (1981) pp. 90‑94

17 KUNA, M.

Hybride Sonderelemente zur Spannungsanalyse dreidimensionaler rißbehafteter Körper

Berichte IX. Int. Kongreß IKM Weimar (1981) pp. 27‑30

16 KUNA, M.

Special hybrid elements for the analysis of two‑ and three‑ dimensional crack

problems Proceedings II. Conf. Numerical Methods in Continuum Mechanics

Strbske Pleso (1981) pp. 226‑231




1980 15 KUNA, M., BILEK, Z., KNESL , Z., SCHMIDT, V.

Theoretical and experimental investigation of the behavior of plane bodies with a crack in the elastic and elastic-plastic regions. 1. Analysis of stresses and strains by the finite element method Strength of Materials Vol. 11 (1980) pp. 1366-1372

14 KUNA, M., BILEK, Z., KNESL , Z., SCHMIDT, V. (IN RUSSISCH):

Teoretisheskoje i experimentalnoje izushenije powedenija ploskich tel s treshtshinoi w

uprugoi i uprugoi‑plastitshe skoi oblastjach Soobtshenije 1 Analyz napraschenii i

deformacii metodom konetschnich elementow

Problemy Protshnosti 11 (1980) pp. 27‑34




1979 13 APPEL, F., MESSERSCHMIDT, U., KUNA, M.

Crack propagation in MgO during in‑situ deformation in the high voltage electron

microscope

Physica Status Solida (a) 55 (1979) pp. 592‑536

12 KNESL, Z., KUNA, M., BILEK, Z., SCHMIDT, V.

The thermal properties of a crack tip plastic zone

Czechozlovak J. Physics B 29 (1979) pp. 825‑828




1978 11 KUNA, M.

Some applications of the finite element method to fracture mechanics of elastic and

elastic‑plastic bodies

Numerical Methods in Fracture Mechanics (Ed.: A. R. Luxmoore) Swansea,

Pineridge Press (1978) pp. 537‑549

10 KUNA, M., BILEK, Z., KNESL, Z., SCHMIDT, V.

Finite element and experimental analysis of fracture toughness test specimens in the nonlinear range Numerical Methods in Fracture Mechanics (Ed.: A. R. Luxmoore) Swansea,


9 KUNA, M., BILEK, Z., KNESL, Z., SCHMIDT, V.

The study of crack tip stress and strain field in elastic‑plastic materials

Czechoslovak J. Physics B28 (1978) pp. 88‑107

8 UHLMANN, W., KUNA, M.

A numerical method for small scale yielding crack problems occurring in a deformation theory Numerical Methods in Fracture Mechanics (Ed.: A. R. Luxmoore) ) Swansea,


7 BILEK, Z., KUNA, M. SCHMIDT V.

Finite Element approach to crack tip opening displacement determination in structural steels 7th Congress on Materials Testing, Lect. v. Vol. 1 (1978) pp. 9-12




1977 6 BILEK, Z., KUNA, M., KNESL, Z.

Study of Crack Tip Opening Using the Finite Element Method. [STUDIUM OTEVRENI TRHLINY METODOU KONECNYCH PRVKU.] Untersuchung der Rißöffnungsverschiebung mit der finite Element Methode Kovove Materialy 15, 6 (1977) pp. 663-684

5 KUNA, M.

Zur Anwendung der Methode der Finiten Elemente in der Bruchmechanik elastischer

und elastisch‑plastischer Körper

Dissertation, Univ. Halle (1977)




1976 4 KUNA, M.

An application of the FEM to elastic‑plastic analysis of the compact tension fracture

test specimen


3 KUNA, M.

Anwendung der Methode der Finiten Elemente in der Bruchmechanik bei elastischem

und elastisch‑plastischem Materialverhalten dargestellt am Beispiel der CT‑Probe

Wissenschaftliche Zeitschrift der Technischen Hochschule Magdeburg 20 (1976) pp.

393‑400

2 UHLMANN, W., KNESL, Z., KUNA, M., BILEK, Z.

Approximate representation of elastic-plastic small-scale-yielding solutions for crack problems





1972 1 KUNA, M., RIEMANN, U.

Atomistische Berechnung der Atompositionen an der Spitze eines Risses in kubisch-raumzentriertem Eisen unter besoderer Berücksichtigung des Gleichgewichtsrisses Diplomarbeit TH Magdeburg, Sektion Physik (1972)

Date post:	09-May-2020
Category:	Documents
Upload:	others
View:	12 times
Download:	0 times

Prof. Dr. rer. nat. habil. Meinhard Kuna - tu-freiberg.de · Prof. Dr. rer. nat. habil. Meinhard...

Documents