Professional Luminaires Lighting Solutions

Professional Luminaires Lighting Solutions

Industrial Lighting & Area Lighting Catalogue 2016

LP/Z

HLR

C00

017/

/MA

R15

/OC

T15

Regional & BRanch offices:

noRTh - Regional office: corporate office: QRG Towers, 2D, Sector-126, Expressway, Noida-201304, Tel: 0120-3331000, Delhi: Tel: 011-47676700, 23888200, chandigarh: Tel: 0172-4232400-401, Dehradun: Tel: 0135-6670202, noida / haryana: Tel: 0120-3331000, ludhiana: Tel: 0161-4676000 / 24, Jammu: Tel: 0191-2478330, 2479330, sri nagar: Tel: 0194-2490431, Jaipur: Tel: 0141-3914645, 3988210 Jodhpur: Tel: 0291-9214201640 / 45, lucknow: Tel: 0522-6672100, Kanpur: Tel: 0512-6710400, 6710409

easT - Regional office: Kolkata: ICC Tower, 5th Floor, 4 India Exchange Place, Kolkata-700001, Tel: 033-40129851 / 52, Bhubaneshwar: Tel: 0674-6668101/102/103/104, guwahati: Tel: 0361-2134521, 2458923, 2460355, siliguri: Tel: 0353-2525907, Ranchi: 0651-2244861, 2244862, 2244864, 2244868, 2244869, Jamshedpur: Tel: 0657-6542492, 09234369436, Patna: Tel: 0612-2207221, 2207222, 2207223, 2655518

WesT - Regional office: Mumbai: 301, Everest House, 3rd Floor, 6, Suren Road, Chakala, Andheri (E). Mumbai - 400 093, Tel: 022-67298600-602, ahmedabad: Tel: 079-40061111, 40060738-740, indore: Tel: 0731-2572340-41, 4009998 (Airtel), Rajkot: Tel: 0281-2481112, 2921212, nagpur: Tel: 0712-2240932, 2242692, 2242699 Pune: Tel: 020-64016413 / 14, Raipur: Tel: 0771-4243400 / 01, surat: Tel: 0261-2350137, 9979890137, Jabalpur: Tel: 0761-4064491

soUTh - Regional office: chennai: Sigapi Achi Building, No. 18 / 3, 6th Floor, Rukmani Lakshmipathy Road, Egmore, Chennai-600008, Tel: 044-42280600, 605, Bangalore: Tel: 080-49075000, coimbatore: Tel: 0422-2305767, 2306199, 2305199, hyderabad: Tel: 040-27533372, 27533355, 27533632, 66320407/0408/6401/6402, Kochi: Tel: 0484-4099000, Vishakapatnam: Tel: 0891-6514339, Vizag: Tel: 0891-6514339, Vijayawada: Tel: 91+9247058847/57, calicut: 4954019194, Madurai: 09994493242, Trivandrum: 4714015323, hubli: 09448146028, Trichy: 09944460160

Representative Offices: • Goa • Solapur • Gwalior • Kathmandu • Bhopal

Although every effort has been made to ensure accuracy in the compilation of the technical detail within this publication,however current details should therefore be checked with Havells Group. Specifications & performance data are constantly changing.

Industrial Lighting &

Area Lighting C

atalogue 2015

havells india ltd. QRG Towers, 2D, Sector -126, Expressway, Noida - 201 304 (UP), Ph. +91-120-3331000,E-mail: [email protected], www.havells.comConsumer Care No.: 1800 11 0303, 1800 103 1313 (All Connections), 011-4166 0303 (Landline)Join us on Facebook at www.facebook.com/havells and share your ways to save the planet!

CIN - L31900DL1983PLC016304.

Pole Diagram for SOLAR street light:

LED

Controller

Highly effecient controller to charge yourbatter ies & microcontroler control led a lgor i thms for l ight management to ensure maximum uptime. Microcontroller managed algorithms autonomously determinesunrise & sunset.

Only Tier 1 make poly crystalline siliconsolar panels with high efficiency & longlifetime area used.

High Lumen LED modules for maximum efficacy with lifetime > 50,000 hrs & CRI nominal 70.Pressure Die cast Aluminium IP66 enclosure offer excellent water-proofing & humidity barrier.

Specific deep discharge batteries are used to store the energy, provide energy for immediate requirements, and enable a back-up for days when there is little or no sun.

Brighten your Worldwith Havells LED

We are now in SOLAR street light.

Benefits of solar LED street lights 1. Fully Renewable and Independent Energy source.

2. Zero Carbon foot prints.

3. Easy to Install. Instant installation and ready to use.

4. No External cabling,Trenching required i.e eliminates the chance of accident due to electric shocks, No trenching & wiring.

5. Ideal solution for Rural and remote areas where power lines are not available.

6. Independent of Grid , the operational costs are minimum.

7. Green technology.

8. No maintenance in initial years

9. Immediate Returns on Investment.

Solar Street light systemA LED based solar street lighting system

consists of a PV Module, control electronics,

battery, and LED based luminaries, all suitably

mounted on a pole. The battery is charged by

electricity generated through the PV module

during day time and the luminaries provides

light from dusk to dawn.

Applications• Street Lighting

• Perimeter Security Lighting

• Park Lighting

• Campus Lighting

• Pathway Lighting

• Remote Area Lighting

• Farm Lighting

• Ship Dock Lighting

• Railway Yard Lighting

Why Havells Solar LED Luminaire

Havells LED Luminaries delivers the best in class lumen efficacy. They deliver the maximum light output (lumens) at the lower wattage .

About MPPT

Havells LED street lighting systems are designed with MPPT (Maximum Power Point Tracking) which provides about 25% more efficiency by utilizing maximum energy harvested by solar PV modules.

About Solar PV module

Highly efficient poly crystalline solar modules are used which are tested for longer durability & manufactured with innovative technologies. These modules are designed to withstand highly corrosive atmospheres and heavy wind loads. Also the modules are certified for industry standards IEC61215,IEC61730( safety class 1 & 11), IEC61701 and CE.

Product Offerings.1. Standard systems ( this is offered with Preset specification with various wattages to suit,

Specs of Govt., private and PSU’s)

2. Customized solutions can be offered with one to one meeting with end user.

3. Hybrid system which would operate on AC ( alternate current, i.e in presence of GRID supply and DC ( Direct current in ABSENCE of grid supply) it would work in Either Circumstances.

Havells – Lighting up the wayHavells India Limited is a USD 1.4 billion Indian multinational company. Havells is also the 4th

largest lighting company of the world. The company owns a large product portfolio in consumer

and professional lighting, and caters to indoor, outdoor and specialty lighting segments.

Havells’ strength is its manufacturing capability. Havells is the only company in India that

manufactures its entire lighting product portfolio in-house. The company has established a state-

of-the-art, technologically advanced manufacturing plant at Neemrana, Rajasthan to manufacture

luminaires and fixtures. The ultra-modern manufacturing plant is a replica of Havells manufacturing

in France, and contains sophisticated processes like robotic box bending machines. Supported

by German, Italian and Japanese technology, the colossal manufacturing unit is spread over 2

lakh square feet, and churns out 5 million CFLs every month.

Havells lighting business is strongly supported by its dealership network of over 20,000 across

the world. In 2007, the company made history by acquiring the legacy European lighting brand

‘Sylvania’. The acquisition strengthened Havells lighting in the global markets.

1

LED : Light Emitting DiodeLEDs are miniature Light Sources made of semi-conductor material. They work on the basic principle of a p-n junction diode. When appropriate DC voltage is applied to it, the diode is forward biased (on), the electrons are able to recombine with holes and energy is released in the form of light.This effect is called electro luminescence and color of light is determined by the energy gap of the semiconductor.

LED Lamp:A LED lamp (also called LED bar or Illuminator) is a type of solid state lighting (SSL) that uses light-emitting diodes (LEDs) as the source of light. They usually comprise clusters of LEDs in a suitable housing. LEDs by nature emit light in a very small focused wavelength range that is characteristic to the energy band gap of the semiconductor. In order to overcome this, two primary methods of creating white light from LEDs are being used, Red-Green-Blue LEDs and phosphor converted LEDs.

Why LED:Lower Energy ConsumptionLonger LifetimeImproved RobustnessSmaller Size

Instant Start: LEDs are ideal for use in applications that are subject to frequent on-off cycling, unlike fluorescent lamps that burn out more quickly when cycled frequently or HID lamps that require a long time before restarting. LEDs are easily dimmable.

Environment Friendly - Does not Contain Mercury.Solid package of LED can be designed to focus its light. Incandescent and Fluorescent sources require external reflector for the same. Reduced CO2 emission

LEDs are shock resistant being solid state components.

Applications:• Generallighting• Lowenergyindicators• Signage• AutomotiveLighting• TrafficLights• TextandVideoDisplays.• StreetLights• LEDTelevision• Communication• Sensors• LightMatterInteraction

Havells - Alwar

Havells - Baddi

Havells - Neemrana

Manufacturing

Plants

Havells Sylvania - Germany

Havells Sylvania - Colombia

Havells Sylvania - Brazil

P r o d u c t I n d e x

Industrial Lighting

Titania LED Tubelight Page 8-9

Titania PRO LED Tubelight Page 10-11

Regal Batten LED Page 12-13

Magnum LED 24W Page 14-15

Endura Magnum 20W & 40W Page 16-17

Endura Well Glass Neo Page 18-19

Endura Highbrite Page 20-21

Endura Bay Brite Page 22-23

Endura Bay Brite Neo Page 24-25

Batten EZ T5 Page 26-27

Regal Batten T5 Page 28-29

EnergyEfficient T5 Reagl Batten Page 30-31

Regal Batten T5 PCR/ALR Page 32-33

Regal Batten T8 Neo Page 34-35

Regal Batten Page 38-39

Regal Batten PCR/ALR Page 40-41

ProdigyPage 42-43

Prodigy Ultra Page 44-45

Regal Batten T8 EZ Page 36-37

Batten Super T5 Page 46-47

HB/MB NI with Al. Reflector (Open) Page 58-59

Magnum 1 Page 48-49

HB/MB NI with Al. Reflector (Closed) Page 60-61

Magnum 2 Page 50-51

Chandelier Seal Beam I Page 62-63

VPF1NI Page 52-53

Highbay Neo with Neck Reflector Page 64-65

VPF1NewPage 54-55

Uro Bay (Open) Page 66-67

VPF2Premium Page 56-57

Uro Bay (Enclosed) Page 68-69

T5 Highbay (Enclosed) Page 70-71

Jeta Neo 30 & 50 Page 74-75

Jeta Linear Page 76-77

Jeta Neo 120/150 Page 78-79

Jeta Pro 200/240/300 Page 80-81

Jeta Mini Page 82-83

Jeta 1 Page 84-85

Area Lighting

Jeta 2 Page 86-87

Jeta 6 RO IP66 Page 90-91

Jeta 6 New Page 92-93

Ranger 1 New NI Page 94-95

Jeta Axial Page 96-97

Jeta 3 New Page 88-89

Ranger 2 NI Page 98-99

Ranger 2 Oval NI Page 100-101

Beam Page 102-103

Professional Industrial Lighting

8

Titania LED TubelightUltra bright LED Tubelight (single side connection) with very high efficacy suited forinstallation in existing tubelight G13 lamp holders to give glare free light.

Benefits• Delivershighbrightness&excellent illumination• ExtraordinarylonglifeofLED’s(over 35,000 burning hrs.) & long lasting LED driver ensures zero maintenance• Environmentfriendlyasitdoesnot contain Mercury• Instantlight• NoUVradiation• ExcellentCRI>80• OperatingTemp.range: –10°C to +50°C

Housing & FinishElegantly designed aluminium heat sink forefficientheatdissipationmatedwithhighefficacypolycarbonatediffuserto provide glare free uniform light distribution.

System efficacyBestinclassefficacy>100 Lm/W which translates into low power consumption and high brighness.

Control gearInbuilt electronic driver (SMPS based constant current supply). THD <20%.

MountingPerfectlyfitsintoexisting1200mmT8Fluorescenttubelightfixtures.

Applications•Corporateoffices•ShoppingMalls•Restaurants•Hotels•EducationalLighting•Parkings

Product Specifications

9

Technical Data

Technical Drawing

A

B

26±

1

28±

1

13Side View

Front View

Ordering Code

System Power

Nominal Voltage (V)

Mains Current (A)

LampSocket

Power Factor

Colour Temp. (CCT)

System Luminous Efficacy Lm/ W

LHEYBWP7IG1S010 10W 240 0.060 G 13 >0.90 6500K >100

LHLDCLXNUK7Z016 16W 240 0.080 G 13 >0.90 6500K >100

LHLDCLXNUJ7Z018 18W 240 0.090 G 13 >0.90 6500K >100

LHLDCLXNUJ7Z020 20W 240 0.100 G 13 >0.90 6500K >100

Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsofinstallations are not provided with proper Earthing.

All dimensions are in mm

System Power Length (A) Length (B)

10W 604±2 590±2

16/18/20W 1215±2 1200±2

10

Titania PRO LED TubelightUltrabrightLEDTubelight(oppositesideconnections)withveryhighefficacysuitedforinstallation in existing tubelight G13 lamp holders to give glare free light.

Benefits• Delivershighbrightness&excellent illumination• ExtraordinarylonglifeofLED’s(over 35,000 burning hrs.) & long lasting LED driver ensures zero maintenance• Environmentfriendlyasitdoesnot contain Mercury• Instantlight• NoUVradiation• ExcellentCRI>80• OperatingTemp.range: –10°C to +50°C

Housing & FinishElegantly designed aluminium heat sink forefficientheatdissipationmatedwithhighefficacypolycarbonatediffuserto provide glare free uniform light distribution.

System efficacyBestinclassefficacy>100 Lm/W which translates into low power consumption and high brighness.

Control gearInbuilt electronic driver (SMPS based constant current supply). THD<15%.

MountingCanbefixeddirectlyintotheexistingT8/T12FTLconventionalfixtures(withelectromagnetic ballast) after removing the starter &newfixturecanbemanagedaccordingly.

Applications•Corporateoffices•ShoppingMalls•Restaurants•Hotels•EducationalLighting•Parkings


11

Technical Data

Technical Drawing


Ordering Code

System Power

Nominal Voltage (V)

Mains Current (A)

LampSocket

Power Factor

Colour Temp. (CCT)


LHLDDBXEUL7Z018 18W 240 0.090 G 13 >0.90 6500K >100

LHLDDBXEUL7Z020 20W 240 0.100 G 13 >0.90 6500K >100

Front View

1213±2

1200

12.5

24

28.5

2931.5

Side View


12

Regal Batten LEDGeneral purpose industrial compact batten suitable for single Endura Tube Light.

HousingHousing & cover made up of CRCA sheetsteel.Coverisfixedtothehousingby means of 2 nos. bolt with engineering plastic head.

FinishEpoxy powder coated white after phosphochromate treatment.

Lamp holdersPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.

Electric gearPre-wired with lamp holder to terminal block & for more information refer to*Endura Tube Light Data Sheet (Supply connection on opposite side).#Endura Tube Light Data Sheet (Supply connection on one side).

MountingOn ceiling/ wall with screws at a distance of 900 mm, suspend by 2 nos. Ø19 mm conduit pipe at a distance of 600 mm or with chains at a distance of 700 mm.

Applications•Schools•Lobbies•Residences•Industrialbays•Railwayplatforms•Godowns/garages


13

Technical Data

Technical Drawing


900

Front View1224±2

Side View38±1

68±

1

Ordering Code

System Power

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

Colour Temp. (CCT)

LHFYBWP1TB1W020* 1x18/22W LED T8 240 - G 13 - -

LHFYBYPNIA1W022# 1x18/22W LED T8 240 - G 13 - -

For electrical parameters refer to Endura Tube Light data sheet.

Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpoints of installations are not provided with proper Earthing.

14

Magnum LED 24WEnergy saving, environmental friendly, long life, corrosion resistant, impact proof, surface mountingluminairewithPChousinginopalfinishsuitableforwetlocationwithLEDsaslight source.

Benefits• Highefficacy&lowerpower consumption• Delivershighbrightness&excellent illumination even in high ceiling areas • ExtraordinarylonglifeofLED’s(over 50,000 burning hrs.) & long life of high end electronic driver (over 30,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury• Instantlightwithlowrunning temperatures

HousingMade up of corrosion resistant round shaped unbreakable polycarbonate bodyinopalfinishforglarefreelightdistribution.

End capsWhite coloured ABS clamps on which snapfitSSmountingclampcanbefixed& white coloured ABS end caps are screwed on this clamp.

OpticsReflector made of LEF sheet which is pasted on Al. sheet (heat sink) on both sides of LED strip to enhance the lumen outputofthefixture.

Electronic driverPowered by an in-built electronic driver (SMPS based constant current supply) with THD<33%.

MountingOn ceiling/ wall through 2 nos. slots usingSSclampsprovidedwithfixture.

Applications•Batteryrooms•Coldstorage•Chemicalfactories•Undergroundparkings•Thermalpowerstations


15


Technical Drawing

Technical Data

1200

34

1227

53

1083Top View

Ø 43Side View

Ordering Code

System Power

Nominal Voltage (V)

Mains Current (A)

Power Factor

Colour Temp. (CCT)


LHFKAWN7UC8W024 24W 240 0.110 >0.90 6000K >85


16

Endura Magnum 20W & 40WEnergy saving, environmental friendly, long life, corrosion resistant, impact proof, surface mountingluminairewithPChousing&opalfinishcoversuitableforwetlocationwithLEDsas light source.

Benefits• Highefficacy(>90lm/W)&lower power consumption• Delivershighbrightness&excellent illumination even in high ceiling areas• ExtraordinarylonglifeofLED’s(over 50,000 burning hrs.) & long life of high end electronic driver (over 30,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury• Instantlightwithlowrunning temperatures

HousingMade up of corrosion resistant unbreakable polycarbonate body.

CoverHigh quality polycarbonate diffuser in opalfinishforglarefreeuniformlightdistribution,fixedtothehousingwithSSsnapfitclamps.

LampHighefficiencylonglifeLEDchipwithRa>70,lumenefficacy>125 lm/W & view angle 120°.

OpticsReflector made of LEF sheet which is pasted on Al. sheet (heat sink) to enhancethelumenoutputofthefixture.

Electronic driverPowered by an in-built electronic driver (SMPS based constant current supply) with THD<15%.

MountingOn ceiling/ wall through 2 nos. slots using SS clamps & screws provided with fixture.

Applications•Batteryrooms•Chillingplants•Chemicalfactories•Undergroundparkings•Thermalpowerstations


17


System Power Length (L) Width (W) Height (H) D No. of Toggles

20W 605±2 88±2 72±2 248 8

40W 1205±2 88±2 72±2 835 14

Technical Drawing

Technical Data

Top View

LFront View

Side View

DH

W

Ordering Code

System Power

Nominal Voltage (V)

Mains Current (A)

Power Factor

Colour Temp. (CCT)


LHEKAWN7PZ6J020 20W 240 0.100 >0.90 6000K >95

LHEKAWN7IZ6J040 40W 240 0.185 >0.90 6000K >90


18

Endura Well Glass NeoEnvironmental friendly, energy saving long life corrosion resistant, vertical mounting pressure diecast aluminium well glass luminaires with high power COB LED as light source.

Benefits• Highefficacy&lowerpower consumption• Delivershighbrightness&excellent illumination• ExtraordinarylonglifeofLED’s(over 50,000 burning hrs.) & long life of high end electronic driver (over 30,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury• Instantlightwithlowrunning temperatures• Operatingtemp.range: -20°C to +50°C.

HousingPressure die-cast aluminum alloy LM24 housing (heat sink) for effective thermal management, sturdiness & excellent corrosion resistant. 2 nos. cable gland PG11 is provided at cable entry for maintaining Ingress protection and for providing loopin & loop-out facility.

CoverHigh quality polycarbonate diffuser in opalfinishforglarefreelightdistributionfixedtothehousingwith5nos.SSscrews.

LampHighefficiencylonglifeCOBLEDchipwith Ra>70,lumenefficacy>120 lm/W & view angle of 120° to ensure better light distribution.

FinishEpoxy powder coated after phosphochromate treatment in metallic silverfinish.

Control gearIn built integral electronic driver with APFC, THD<10%.

Mounting• Canbesuspendedbyheavydutyeye- bolthookprovidedwiththefixture.• Grubscrewisprovidedfor locking the mounting eye-bolt.

Applications•Industrialbays•Cementfactories•Oilprocesslocations•Mediumindustrialunits


19

Ordering Code

System Power

Nominal Voltage (V)

Mains Current (A)

Power Factor

Colour Temp. (CCT)


LHEMABNDPN6S024 24W 240 0.110 >0.95 5000K >95

LHEMABNDPN7S040 40W 240 0.180 >0.95 5000K >85

Technical Data

Technical Drawing


Driver code: LSSLOX0086 for 24W, LSSLOX0063 or 40W.

Ø170±2

Top View12

8±2

Front View

214±

2 254±

2

ID 17.5

Ø132


20

Endura HighbriteEnergy saving, environment friendly & robust open type vertical Highbay/Mediumbay LED luminaire with high power COB LED as light source.

Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• Delivershighbrightness&excellent illumination• ExtraordinarylonglifeofLED’s(over 50,000 burning hrs.) & long life high end electronic driver ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury• Instantlightwithlowrunning temperatures• Operatingtemp.range: -10°C to +50°C

HousingExtruded aluminium housing (heat sink)forefficientthermalmanagement,

sturdiness & excellent corrosion resistant. Pressure die-cast aluminium housing (ADC12/LM24) for control-gear (Breather port is provided in Control Gear for 150W). PG7 gland is used for cable entry for maintaining ingress protection.

FinishControl Gear housing is epoxy powder coated black after phosphochromate treatment whereas heat sink is anodised inblackfinish.

LampHighefficiencylonglifeCOBLEDwityRa>70andlumenefficacyof120lm/Wwith view angle of 120° to ensure better uniformity of light distribution.

OpticsAluminium spun reflector sand blasted from inside and electrochemically

brightened.Glass lens over COB for uniform distribution & comfortable lighting with beam angle of 90°.

Electronic driverPowered by an in built, replaceable electronic driver (SMPS based constant current supply) with THD<10%.

MountingSuspended by means of heavy duty aluminium die-cast eye-bolt provided withthefixture.Screwisalsoprovidedinthe casting to lock the eye-bolt.

Applications•Cement&steelplants•Warehouses•Factories&assemblylines•Tollplazas


21

Technical Drawing

Technical Data

Ordering Code

System Power

Nominal Voltage (V)

Mains Current (A)

Power Factor

Colour Temp. (CCT)


LHELAWUDPC5K050 50W 240 0.230 >0.90 5000K >104

LHELAWUDUC6K090 90W 240 0.400 >0.95 5000K >110

LHELAWUDPC5K150 150W 240 0.650 >0.95 6500K >104


System Power Total Ø (A) Total Height (B) Heat Sink Height (C)

50W 362±2 352±2 82±2

90W 447±2 490±2 180±2

150W 518±2 580±2 280±2

Driver code: LHGDKDDFGRB1050 for 50W, LHGDADDHGRCL090 for 90W, LHGDNDFHFSBL150 for 150W.

A

4 Nos. mounting holes of Ø 5 at PCD of 90 mm for mounting refelector

Top View

Cable glandPG 7

B

C

Ø36

Front View

IP54 for optical compartment, IP65 for control gear compartment.


22

Endura Bay BriteEnergy saving, environmental friendly, long life, exclusive innovative pressure die-cast aluminium Bay light with high power LEDs as light source, suitable for highlighting architectural features or retail spaces.

Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• ExtraordinarylonglifeofLED’s(upto 50,000 burning hrs.) & long lasting LED driver (upto 35,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain mercury • OperatingTemp.range: -10°C to +45°C• Instantlightwithlowrunning temperatures• Significantlylowerrunningcostas compared to conventional lighting systems

Housing & FinishEpoxy powder coated pressure die-cast aluminium housing (ADC2/LM24) in greyfinishwithelegantlydesignedheatsinkforefficientthermalmanagement,sturdiness & excellent corrosion resistant. Cable gland PG7 for 80W & PG9 for 150W is provided at cable entry for maintaining ingress protection.

CoverHighqualitytoughenedglassfixedtohousing with 10 nos. SS screws.

LampHighefficiencylonglifeLEDchipsinmodule with Ra>70&lumenefficacyof 130 lm/W with PMMA modular lens plate of beam angle 90º to ensure better uniformity of light distribution.

Electronic driverIn-built, replaceable electronic driver (2 nos.) with APFC, THD<15%.

MountingWall or surface mounting using adjustable MS bracket of thickness 3mmprovidedwiththefixtureby2elliptical slots of Ø 12.0 mm at a distance of 148 mm & 5 holes of Ø 10.0 mm at CD of 49.5 mm.Allen bolt is provided for angle adjustment.

Applications•Signboards•Building&monuments•Billboard•Shopboard•Petroliumcanopy


23

System Power Length (L) Width (W) Height (H) No. of LED Mounting CD

80W/90W 403±2 232±2 217±2 36 Ø 10 at 148mm

120W 514±2 291±2 236±2 48 Ø 10 at 49.5mm (5 Holes)

150W 514±2 291±2 236±2 64 Ø 10 at 49.5mm (5 Holes)

Ordering Code

System Power

Nominal Voltage (V)

Mains Current (A)

Power Factor

Colour Temp. (CCT)


LHEPCOU7IN7J080 80W 240 0.400 >0.95 6000K >100

LHELAWU7PN7J090 90W 240 0.400 >0.95 6000K >90

LHELAWU7IN7J120 120W 240 0.530 >0.95 6000K >85

LHECPCZU7IN7J150 150W 240 0.630 >0.95 6000K >95

Technical Data

Technical Drawing

Driver code: LHGDPDFHFRBL090 for 80/90W, LHGDPDDGESBL120 for 120W, LHGDPDFHESBL150 for 150W.

WBottom View

CD

Front View

H

Side ViewL


MountingFrameCodeforEnduraBayBrite80W/90W:LSSLOG0004.


24

Endura Bay Brite NeoEnergy saving, environmental friendly, long life, exclusive innovative pressure die-cast aluminium Bay light with 40 high power LEDs as light source, suitable for highlighting architectural features or retail spaces.

Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• ExtraordinarylonglifeofLED’s(upto 50,000 burning hours) & long lasting LED driver (upto 35,000 burning hours) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain mercury • OperatingTemp.range: -10°C to +45°C• Instantlightwithlowrunning temperatures• Significantlylowerrunningcostas compared to conventional lighting systems

Housing & FinishEpoxy powder coated pressure die-cast aluminium housing (ADC2/LM24) in greyfinishwithelegantlydesignedheatsinkforefficientthermalmanagement,sturdiness & excellent corrosion resistant. Cable gland PG7 is provided at cable entry for maintaining ingress protection.

CoverHighqualitytoughenedglassfixedtohousing with 10 nos. SS screws.

LampHighefficiencylonglifeLEDchips(Cree/Nichia) in module with Ra>70 & lumenefficacyof130lm/WwithPMMAmodular lens plate of beam angle 90º to ensure better uniformity of light distribution.

Electronic driverIn-built, replaceable electronic driver with APFC, THD<10%.

MountingWall or surface mounting using adjustable MS bracket of thickness 3mmprovidedwiththefixtureby2elliptical slots of Ø 12.0 mm at a distance of 148 mm. Allen bolt is provided for angle adjustment.

Applications•Signboards•Building&monuments•Billboard•Shopboard•Petroleumcanopy


25

Ordering Code

System Power

Nominal Voltage (V)

Mains Current (A)

Power Factor

Colour Temp. (CCT)


LHELAWU7IN7J090 90W 240 0.400 >0.95 6000K >95

Technical Data

Technical Drawing

MountingFrameCodeforEnduraBayBrite80W/90W:LSSLOG0004.

Driver code: LHGDPDFHFRBL090.


232±

2

1482 Elliptical HoleØ12x61 mmØ14

Bottom View

212±

2

35

Side ViewFront View403±2


26

Batten EZ T5Decorative ultra slim box fixture with Industrial electronic ballast suitable for single14W/28W linear fluorescent lamp for Industries/ indoor application only.

HousingMade up of ultra slim CRCA sheet steel.

FinishEpoxy coated white after phosphochromate treatment.

End capsBlue colour clip-on end caps provided as standard.


Electric gear*Pre-wiredwith240Vratedhighfrequency HPF electronic ballast, THD <33% upto terminal block, packed in gift box.

MountingOn ceiling/ wall with screws or suspend by stainless steel suspension wire.

Applications•Residences•Cleanrooms•Covelighting•Hospitalpremises•Conferencerooms


27

Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor

LHFYBYF1OA1W014 1x14W T5 FTL 240 0.070 G 5 >0.90

LHIT81128032* 1x28W T5 FTL 240 0.140 G 5 >0.95

Technical Data

Technical Drawing

Lamp Type Length (L) Width (W) Height (H)

1x14W T5 FTL 600±1 23±1 45±1

1x28W T5 FTL 1200±1 23±1 45±1


Electronic Ballast:1x28W T5 FTLItem Code: LHBT03128032Vin; 240V, 50Hz, 0.140A, P.F.-0.95

T5 Ez LAMP

P

N

L

Top View

H

Side View

Front ViewW

28

Regal Batten T5General purpose industrial compact batten suitable for 28W/54W (T5 FTL) single and twin linear fluorescent lamps.




Electric gearPre-wired with high performance electronic ballast (THD<33%) as a standard.


Applications•Schools•Industrialbays•Railwayplatforms•Godowns/garages•Assemblybenches


29


LHFYBYF1ON1W028* 1x28W T5 FTL 240 0.140 G 5 >0.95

LHFYBYF2ON1W028 2x28W T5 FTL 240 0.280 G 5 >0.95

LHFYBYF1IN1W054 1x54W T5 FTL 240 0.230 G 5 >0.95

Technical Data

Technical Drawing


*With Olympian Sleek electronic ballast. Item code - LHBT02128032.

900

Front View1174±2

Side View38±1

70±

1

T5 1x28/54W

T5 2x28W

900

Front View1174±2

Side View38±1

72±

2

72±2

30

Energy Efficient T5 Regal BattenEnergyefficientindustrialcompactbattensuitablefor28W(T5FTL)singleandtwinlinearfluorescent lamps.




Electric gearPre-wired with high frequency digital ballast (THD<10%) as a standard.

MountingOn ceiling/ wall with screws or suspend by 2 nos. Ø19 mm conduit or chain.



31


LHFYBYF1PB1W028 1x28W T5 FTL 240 0.140 G 5 >0.98

LHFYBYF2PB1W028* 2x28W T5 FTL 240 0.280 G 5 >0.98

Technical Data

Technical Drawing


*With program start electronic ballast. Item Code: LHGEBFDHFRA2028.

900

Front View1174±2

Side View38±1

70±

1

T5 1x28W

T5 2x28W

900

Front View1174±2

Side View38±1

72±

2

72±2

32

Regal Batten T5 PCR/ALRGeneral purpose industrial compact batten suitable for 28W (T5 FTL) single and twin linear fluorescent lamps with powder coated or pre-anodised aluminium reflector.

HousingHousing made up of CRCA sheet steel.


ReflectorEither powder coated white (PCR) after phosphochromate treatment or high purity pre-anodised aluminium sheet (ALR)fixedtothehousingbymeansof2nos. bolt with engineering plastic head.






33


With PC Reflector

LHFYBYF1ON1W028*LSSLOW0007

1x28W T5 FTL 240 0.140 G 5 >0.95

LHFYBYF2ON1W028LSSLOW0007

2x28W T5 FTL 240 0.280 G 5 >0.95

With AL Reflector

LHFYBYF1ON1W028*LSSLOX0021

1x28W T5 FTL 240 0.140 G 5 >0.95

LHFYBYF2ON1W028LSSLOX0021

2x28W T5 FTL 240 0.280 G 5 >0.95

Technical Data

Technical Drawing


*With Olympian Sleek electronic ballast. Item code - LHBT02128032

900

Front View1174±2

Side View38±1

72±

2

112±2

T5 1x28W PCR/ALR T5 2x28W PCR/ALR

900

Front View1174±2

112±2

72±

2

Side View38±1

34

Regal Batten T8 NeoGeneral purpose domestic compact batten suitable for 36W (T8 FTL) single linear fluorescent lamps.




Electric gearPre-wiredwith230Vratedhighfrequency HPF electronic ballast as a standard.

Not recommended for industrial 240V application.


Applications•Lobbies•Schools•Offices•Residences•Conferenceroom


35


LHFYBYG1IN1W036 1x36W T8 FTL 230 0.160 G 13 >0.90

Technical Data

Technical Drawing


With T8 Neo electronic ballast item code LHGEAFEBHOA1036.

900

Front View1224±2

Side View38±1

68±

1

36

Regal Batten T8 EZGeneral purpose domestic compact batten suitable for 36W (T8 FTL) single and twin linear fluorescent lamps.




Electric gearPre-wired with high frequency electronic ballast as a standard.


Applications•Lobbies•Schools•Offices•Conferenceroom


37


LHFYBYG1ON1W036 1x36W T8 FTL 240 0.160 G 13 >0.95

LHFYBYG2IN1W036 2x36W T8 FTL 240 0.320 G 13 >0.95

Technical Data

Technical Drawing


With T8 EZ electronic ballast item code LHGEAFDBHPA1036.

900

Front View1224±2

Side View38±1

63±

2

99±1

T8 2x36W

T8 1x36W

900

Front View1224±2

Side View38±1

68±

1

38

Regal BattenGeneral purpose industrial compact batten suitable for 36W (T8 FTL) single and twin linear fluorescent lamps.




Electric gearPre-wired with high frequency electronic ballast as a standard.Option with high frequency digital ballast (THD<10%) also available.


Applications•Schools•Lobbies•Industrialbays•Railwayplatforms•Godowns/garages


39


LHFYBYG1OB1W036 1x36W T8 FTL 240 0.160 G 13 >0.95

LHFYBYG2ON1W036 2x36W T8 FTL 240 0.320 G 13 >0.95

LHFYBYG2IB1W036 2x36W T8 FTL 240 0.320 G 13 >0.95

LHFYBYG1PB1W036 1x36W T8 FTL 240 0.160 G 13 >0.98

LHFYBYG2PN1W036 2x36W T8 FTL 240 0.320 G 13 >0.98

Technical Data

Technical Drawing


EB for LHFYBYG1OB1W036 is Olympian Slim LHBF28904025.EB for LHFYBYG2ON1W036 is Industrial Ballast LHBF07204027.EB for LHFYBYG2IB1W036 is Olympian Slim LHBF28904025 - 2 Nos.EB for LHFYBYG1PB1W036 is Industrial Ballast LHBF08104028.EB for LHFYBYG2PN1W036 is Digital Ballast LHGEBFDHFRA2036.

900

Front View1224±2

Side View38±1

63±

2

99±1

T8 2x36W

T8 1x36W

900

Front View1224±2

Side View38±1

68±

1

40

Regal Batten PCR/ALRGeneral purpose industrial compact batten suitable for 36W (T8 FTL) single and twin linear fluorescent lamps with MS powder coated or pre-anodised aluminium reflector.

HousingHousing made up of CRCA sheet steel.


ReflectorEither powder coated white (PCR) after phosphochromate treatment or high purity pre-anodised aluminium sheet (ALR)fixedtothehousingbymeansof2nos. bolt with engineering plastic head.






41


With PC Reflector

LHFYBYG1OB1W036LSSLOW0008

1x36W T8 FTL 240 0.160 G 5 >0.95

LHFYBYG2IB1W036LSSLOW0009

2x36W T8 FTL 240 0.320 G 5 >0.95

With AL Reflector

LHFYBYG1OB1W036LSSLOX0022

1x36W T8 FTL 240 0.160 G 5 >0.95

LHFYBYG2IB1W036LSSLOX0023

2x36W T8 FTL 240 0.320 G 5 >0.95

Technical Data

Technical Drawing


T8 1x36W PCR/ALR

70±

2

Side View38±1

72±

2

112±2

900

Front View1224±2

T8 2x36W PCR/ALR

187±2

72±

2Side View

38±1

70±

2

900

Front View1224±2

42

ProdigyEnergysavingreadytouseretrofitT5luminairecompatiblewithexistingopenFTLT12fixturebyremovingstarter.

Benefits• Savesover45%energyascompared to 40W FTL with electromagnetic ballast• Pre-heatstartelectroniccircuit enhances lamp life• Humfree&flickerfreeoperationfrom 125Vto285V• Reducesheatloadonairconditioners• Built-inlampageingprotection• Overvoltageprotectionat295Vand above• EnergyEfficiencyIndex(EEI):A2• Controlledharmonicdistortion (THD<33%)• Highpowerfactor>0.95

Advantage• Actsasaretrofitsolution• Oldindustrialbattenconversioneasy• IdealforconvertingT12/T8/fittingsto T5• Suitableforanypattifitting (remove starter)

Applications•Homes•Schools/libraries•OldGovt.offices•Industrialbattens•Gov.guesthouses•Railwaywaitingrooms


43


LHIT12114431 1x14W T5 FTL 240 0.070 G 5 >0.95

LHIT13128432 1x28W T5 FTL 240 0.140 G 5 >0.95

Technical Data

Technical Drawing


Ensure removal of starter from old T12/ T8 fitting before fixing “Prodigy“ in and switching on.

665±2

Side View

42±

1

Front View27±1

Prodigy 14W T5

Front View27±1

Side View

1213±2

42±

1

Prodigy 28W T5

44

Prodigy UltraGeneralpurposeindustrialcompact&decorativePVCbattenwithintegralwingshapedmetallizedfilmreflectorsuitablefor28W(T5FTL)singlelinearfluorescentlamps.

HousingHousingmadeupofPVCinwhitefinishwith decorative metallic grey coloured end caps.

ReflectorIntegral wing shaped metallized aluminiumfilmreflectorforhighlightoutput.


Electric gearPre-wired with integral high frequency digital ballast (THD<10%) as per IS:13021Part1&2.

MountingFixed on ceiling/ wall with the help of snap-oninstallerprovidedwithfixture.



45


LHFYBXF1PN1W028 1x28W T5 FTL 240 0.140 G 5 >0.98

LHEYBXFGON1W028* 1x28W T5 FTL 240 0.140 G 5 >0.98

Technical Data

Technical Drawing


Front View1183±2

Side View28±1

40±1

45±

1

*With Lamp.

46

Batten Super T5Decorativeultraslimfixturewithextrudedaluminiumbody,prismaticdiffuser, snaponinstallers & HF electronic ballast suitable for T5 FTL.

HousingMade up of ultra slim extruded aluminium channel with rib for extra strength, powdercoatedwithwhitefinish.

End capsBlue colour clip-on end caps provided for better aesthetic appearance.

DiffuserHigh quality polycarbonate prismatic diffuser for glare free light.


Electric gearPre-wiredwith240Vratedhighfrequency electronic ballast, upto terminalblock,pre-fittedwithlamp.

MountingFixed on wall/ ceiling with the help of snap-on installers provided.

Applications•Residences•Cleanrooms•Covelighting•Hospitalpremises•Educationalinstitutions•Corridors


47


LHFYBYF1INNW028 1x28W T5 FTL 240 0.140 G 5 >0.95

LHFYBYF1IN1W054 1x54W T5 FTL 240 0.350 G 5 >0.55

Technical Data

Technical Drawing


1202±2

23±

1

45±

2

Top View

Front View

Side View

48

Magnum 1Corrosion resistant, impact proof, surface mounting luminaire of polycarbonate housing with transparent & reeded polycarbonate cover suitable for wet location.



CoverClear polycarbonate reeded cover with better light dispersive internal reeds.

OpticsReflector made from powder coated white MS sheet.

Lamp holderPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.

Electric gearPre-wired with high frequency electonic ballast (THD<33%) upto terminal block as standard.Option for digital ballast (THD<10%) available on request.

MountingOn ceiling/ wall through 2 nos. slots using screws from the top of the luminaire.

Applications•Batteryrooms•Railwaystations•Undergroundparkings•Thermalpowerstations

49


LHIF55218058 2x18W FTL HF 240 0.160 G 13 >0.95

LHIF54218058* 2x18W FTL HF 240 # G 13 >0.95

Technical Data

Technical Drawing


*Emergency power pack with Ni-cd Battery. (EM-33B Basic).Charging period 8 hours. Discharging period 120 minutes @ 20% lumen output.Battery life-700 times charging at rated conditions.#Depends upon charging and mains running current.

670+2Front View

475

Side View

110+

2

160+2

50

Magnum 2Corrosion resistant, impact proof, surface mounting luminaire with polycarbonate housing with transparent & reeded polycarbonate cover suitable for wet location.



CoverClear polycarbonate reeded cover with better light dispersive internal reeds.

OpticsReflector made from powder coated white MS sheet.


Electric gearPre-wired with high frequency electonic ballast (THD<33%) upto terminal block as standard.Option for digital ballast (THD<10%) available on request.

MountingOn ceiling/ wall through 2 nos. slots using screws from the top of the luminaire.

Applications•Batteryrooms•Chillingplants•Chemicalfactories•Undergroundparkings•Thermalpowerstations

51


LHIT55128032 1x28W FTL T5 240 0.140 G 13 >0.95

LHIT56228033 2x28W FTL T5 240 0.280 G 13 >0.95

LHIT55154060 1x54W FTL T5 240 0.230 G 13 >0.98

LHIT56254071 2x54W FTL T5 240 0.460 G 13 >0.95

LHIF55136026 1x36W FTL HF 240 0.230 G 13 >0.85

LHIF56236027 2x36W FTL HF 240 0.460 G 13 >0.85

LHFKAWG1EN6J036* 1x36W FTL 240 # G 13 >0.95

LHIF56236025* 2x36W FTL 240 # G 13 >0.95

Technical Data

Technical Drawing

*Emergency power pack with Ni-cd Battery. (EM-33B Basic). #Depends upon charging and mains running current.Charging period 8 hours. Discharging period 120 minutes @ 20% lumen output. Battery life-700 times charging at rated conditions.

Lamp Type Length (L) Width (W) Height (H) D

1x28W 1215±2 104±2 92±2 840±1

2x28W 1215±2 104±2 92±2 840±1

1x36W 1270±2 80±2 100±2 852±1

2x36W 1270±2 122±2 100±2 852±1

1x54W 1215±2 104±2 92±2 840±1

2x54W 1215±2 104±2 92±2 840±1


MountingHolesDistance:D

LFront View

D

Side View

H

W

52

VPF 1 NINon-integral well glass luminaire, suitable for incandescent/ High Pressure Mercury Vapour/SodiumVapour/MetalHalidelampforvapourladdenareas.


HousingSingle piece die-cast aluminium alloy LM-6.

CoverHeat resistant glass bowl with zinc plated/ galvanized MS wire guard.

FinishEpoxy powder coated grey after phosphochromate treatment.

OpticsWhite painted housing from inside acts as refl ector.

Lamp holderIn ceramics with electrical grade brass contacts.

Electric gearUse appropriate CG box as per selected HID lamp source and wattages except for incandescent (GLS) lamp.

MountingSuspend with 20 mm diameter threaded GI pipe.

Applications•Steelplants•Industrialbays•Thermalplants•Cementfactories•Mediumindustrialunits

53

Ordering Code

Lamp Type

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

CapacitorValue

LHVM16115099 1x200W GLS 240 0.830 E 27 1.00 -

LHVM16115099* 1x125WHPMV 240 0.690 E 27 >0.85 10 mfd

LHVM16115099* 1x70WSV/MH-E 240 0.400 E 27 >0.85 10 mfd

LHVM16115099* 1x150W MH-E 240 0.820 E 27 >0.85 20 mfd

LHVS36115099* 1x150WSV-E 240 0.820 E 40 >0.85 20 mfd

Technical Data

Technical Drawing

*When used with appropriate rating CG box (except 200W GLS lamp).


213±2

Front View

285±

2

54

VPF 1 NewIntegralwellglassluminairesuitablefor70WHighPressureSodiumVapour/MetalHalide/125WMercuryVapour/150WSodiumVapourlampforvapourladdenareas.


HousingSingle piece die-cast aluminium alloy LM-6.

CoverHeat resistant glass bowl with zinc plated/galvanized MS wire guard.


OpticsWhite painted housing from inside acts as reflector.


Electric gearPre-wired with power factor improvement capacitor and impulse ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately be wired as per instruction.

MountingSuspend by means “U” brackets at a CD of 105 mm.


55

Ordering Code

Lamp Type

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

CapacitorValue

LHVW16170D99*LHBW20170036

1x70WSV/MH-E 240 0.400 E 27 >0.85 10 mfd

LHVG16112099*LHBG08112036

1x125WMV 240 0.690 E 27 >0.85 10 mfd

LHVS26115A99*LHBW20115036

1x150W SON-E 240 0.820 E 40 >0.85 20 mfd

Technical Data

Technical Drawing

*Housing consists of lamp compartment & gear box, packed separately.

F

B

E

A

2 Open Elliptical Slot Ø7x18

C

G

D

Lamp Type A B C D E F G

70/125W 295±2 340±2 240±2 115±2 254±2 190±2 105±2

150W 350±2 422±2 274±2 134±2 316±2 220±2 105±2


56

VPF 2 PremiumVerticalmounting integralwellglass luminaire,suitable for70WHighPressureSodiumVapour/MetalHalideor125WMercuryVapourlamp.


HousingSingle piece pressure die-cast aluminium alloy LM-6.

CoverHeat resistant glass bowl with zinc plated/galvanized MS wire guard.


OpticsWhite painted circular disc acts as reflector.



MountingSuspend by means of provided heavy duty suspension hook.


57

Ordering Code

Lamp Type

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

CapacitorValue

LHVW27170D99*LHBW07170036

1x70WSV/MH-E 240 0.400 E 27 >0.85 10 mfd

LHVG27112099*LHBG08112036

1x125WMV 240 0.690 E 27 >0.85 10 mfd

Technical Data

Technical Drawing

*Housing consists of lamp compartment & gear box, packed separately.


Ø173.6

Top View

Side View

192±2

371±

2

141.5±2

Front View

58

HB/MB NI with Al. Reflector (Open)Open type vertical highbay/ mediumbay luminaire suitable for 85W retro CFL and 150W/250W/400WHighPressureSodiumVapourellipticalcoatedlamp.


HousingHousing & cover deep drawn from EDD grade steel sheet.


OpticsSpun aluminium reflector electrochemically brightened, anodised outside and sand blasted from inside.


*Electric gearSelect appropriate control gear as per selected HID Lamp source & wattage.

*Not applicable for 85W Retrofit CFL.


Applications•Steelplants•Warehouses•Thermalplants•Heavyengg.industries

59

Ordering Code

Lamp Type

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

CapacitorValue

LHYW12185099LHYW04125099**

1x85W Retro CFL 240 0.650 E 27 >0.55 -

LHYW12140099LHYW04125099**

1x150WSV-E 240 0.820 E 40 >0.85 20 mfd

LHYW12140099LHYW04125099**

1x250WSV-E 240 1.320 E 40 >0.85 33 mfd

LHYW12140099LHYW02140099**

1x400WSV-E 240 2.200 E 40 >0.85 42 mfd

Technical Data

Technical Drawing

Electrical data shown here is symbolic for actual data refer to control gear used.**Reflectors supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.

Ø80±1

Top ViewFront View

L

H

Ord. Code Length (L) Height (H)

LHYW04125099 403±2 460±2

LHYW02140099 523±2 500±2


60

HB/MB NI with Al. Reflector (Closed)Enclosed type vertical highbay/ mediumbay luminaire (with glass) suitable for 150W/ 250W/400WHighPressureSodiumVapour/MetalHalideellipticalcoatedlamp.


HousingHousing & cover deep drawn from EDD grade steel sheet.

CoverThermal shock proof, impact resistant, tempered and toughened protective 5mmthickglassfixedtothereflectorby3 nos. toggles.




Electric gearSelect appropriate control gear as per selected HID Lamp source & wattage.



61

Ordering Code

Lamp Type

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

CapacitorValue

LHYW12185099LHYW04125099*LHYW23125099**

1x150W MH-E 240 0.820 E 27 >0.55 20 mfd

LHYW12140099LHYW04125099*LHYW23125099**

1x150WSV-E/ 150W CMI-TT Plus

240 0.820 E 40 >0.85 20 mfd

LHYW12140099LHYW04125099*LHYW23125099**

1x250WSV/MH-E 240 1.320 E 40 >0.85 33 mfd

LHYW12140099LHYW02140099*LHYW21140099**

1x400WSV/MH-E 240 2.200 E 40 >0.85 42 mfd

Technical Data

Electrical data shown here is symbolic for actual data refer to control gear used.*Reflectors/ **Glass supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.

Technical Drawing


Top View

H

Front ViewLOrd. Code Length (L) Height (H)

LHYW04125099 406±2 463±2

LHYW02140099 526±2 503±2

62

Chandelier Seal Beam IDecorative, contrast reducing translucent polycarbonate highbay suitable for 70W/150W ellipticalcoatedHighPressureSodiumVapour/MetalHalide/CMI-TTPluslamp.


HousingPressure die-cast aluminium LM24.

CoverConicalfoodgrade&UVstabilisedpolycarbonate sagged lens.


OpticsInjection moulded food grade & UVstabilisedpolycarbonatewithprecisely contoured prismatic internal facets ensures uniform & better light distribution.



MountingSuspend by means of 12mm diameter threaded G.I. pipe.

Applications•Arrivalhalls•Shoppingmalls•Airportwaitinglounges•Publiccirculatingareas

63

Ordering Code

Lamp Type

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

CapacitorValue

LHYW05170C99LHBW07170036LHYW05115099*

1x70WSV/MH-E/ 70W CMI-TT Plus

240 0.400 E 27 >0.85 10 mfd

LHYW05115C99LHBW20115036LHYW05115099*

1x150W MH-E/ 150W CMI-TT Plus

240 0.820 E 27 >0.85 20 mfd

Technical Data

*Refractor and cover supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.

Technical Drawing


Ø330

Ø4.5 3 Holes for

PCD Ø125.8Top View

Ø141

Front ViewØ330

426±

3

64

Highbay Neo with Neck ReflectorVerticalopentypehighbaylumianiresuitableforellipticalcoatedHighPressureSodiumVapour/MercuryVapourlampupto250W.


HousingPressure die-cast Al. housing with loop in - loop out facility (optional).







65

Ordering Code

Lamp Type

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

CapacitorValue

LHFLAQV1AA6H150LHBW20115036LSSLOS0002*LSSLOX0028**

1x150WSV/MH-E/ 1x150 CMI-TT Plus

240 0.820 E 40 >0.85 20 mfd

LHFLAQV1AA6H250LHBW00125036LSSLOS0002*

1x250WSV-E 240 1.320 E 40 >0.85 33 mfd

Technical Data

*Reflectors/**Glass supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.

Technical Drawing


316

308±

2

620±

3

Ø 385

Ø11

66

Uro Bay (Open)Verticalhighbay/mediumbayluminairesuitableforHighPressureellipticalcoatedSodiumVapourlampupto400W.


HousingPressure die-cast aluminium alloy LM6.

FinishEpoxy powder coated grey color after phosphochromate treatment.



Electric gearPre-wired with power factor improvement capacitor and SI ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately, to be wired as per instruction.

MountingMounting by means of hook provided on top housing.


67

Ordering Code

Lamp Type

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

CapacitorValue

LHYW10115D99LHBW20115036LHYW10140099*

1x150WSV-E 240 0.820 E 40 >0.85 20 mfd

LHYW10125D99LHBW00125036LHYW10140099*

1x250WSV-E 240 1.320 E 40 >0.85 33 mfd

LHYW10140D99LHGMCKENEBE1400LHYW10140099*

1x400WSV-E 240 2.200 E 40 >0.85 42 mfd

Technical Data

*Reflectors supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.

Technical Drawing


633±

3

430±1Front View

Top View

68

Uro Bay (Enclosed)Vertical highbay/ mediumbay luminaire (with glass) suitable for High Pressure ellipticalcoatedSodiumVapour/MetalHalidelampupto400W.


HousingPressure die-cast aluminium housing with cooling serrations on side.

FinishEpoxy powder coated grey color after phosphochromate treatment.



Electric gearPre-wired with power factor improvement capacitor and SI ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately, to be wired as per instruction.

MountingMounting by means of hook provided on top housing.


69

Ordering Code

Lamp Type

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

CapacitorValue

LHYW10115D99LHBW20115036LHYW10140099*LHYW35140199**

1x150WSV/MH-E/ CMI-TT Plus

240 0.820 E 40 >0.85 20 mfd

LHYW10125D99LHBW00125036LHYW10140099*LHYW35140199**

1x250WSV/MH-E 240 1.320 E 40 >0.85 33 mfd

LHYW10140D99LHGMCKENEBE1400LHYW10140099*LHYW35140199**

1x400WSV/MH-E 240 2.200 E 40 >0.85 42 mfd

Technical Data

*Reflectors/ **Glass supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.

Technical Drawing


Top View

637±

3

434±1Front View

70

T5 Highbay (Enclosed)Highbay range of luminaires with specially designed reflectors and suitable for 4x14W, 4x24W, 4x28W, 4x54W & 6x54W T5 FTL Lamps.


HousingMade up of CRCA sheet steel.


OpticsReflector made up of high purity pre-anodised aluminium sheet. Designed for symmetric light distribution for high vertical illuminance covered with UVstabilisedmethacrylatecoverasstandard.*Option for polycarbonate cover available on request.


Electric gearPre-wired with HF high performance electronic ballast (THD<33%) as a standard.Option of high frequency digital ballast (THD<10%) available on request.

MountingProvision for suspension through Ø19 mm conduit or on ceiling with 4 nos. holes of Ø5 mm.

Applications•Warehouses•Industrialsheds•Railwaystations•Doubleheightlobbies

71

Technical Data

Technical Drawing


LHIT01414040 4x14W T5 FTL 240 0.280 G 5 >0.95

LHIT01424034 4x24W T5 FTL 240 0.440 G 5 >0.95

LHIT01428033 4x28W T5 FTL 240 0.560 G 5 >0.95

LHIT01454071 4x54W T5 FTL 240 0.920 G 5 >0.95

LHFLAQL7IA5W054 6x54W T5 FTL 240 1.440 G 5 >0.95

LHIT02428051* 4x28W T5 FTL 240 0.560 G 5 >0.98

Top View

Side View

W

H

LFront View


Lamp Type Length (L) Width (W) Height (H)

4x14/ 4x24W T5 FTL 595±2 400±2 50±1

4x28/ 4x54W T5 FTL 1196±2 400±2 50±1

6x54W T5 FTL 1218±2 555±2 50±1

*With polycarbonate cover.

72

73

Professional Area Lighting

74

Jeta Neo 30 & 50Environmental friendly, energy saving, long life, exclusive innovative pressure die-cast aluminium flood light with high power COB LED as light source, suitable for highlightingarchitectural features or retail spaces.

Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• ExtraordinarylonglifeofLED’s(upto 50,000 burning hrs.) & long lasting LED driver (upto 35,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury • OperatingTemp.range: -20°C to +45°C• Instantlightwithlowrunning temperatures• Significantlylowerrunningcostas compared to conventional tunnel lighting systems

Housing & FinishEpoxy powder coated pressure die-cast aluminium housing (ADC12/LM24) in whitefinishwithelegantlydesignedheatsinkforefficientthermalmanagement,sturdiness & excellent corrosion resistant. Cable gland PG9 is provided at cable entry for maintaining ingress protection.

CoverHighqualitytoughenedglassfixedtohousing with 4 nos. screws.

LampHighefficiencylonglifeCOBLEDwithRa>70&lumenefficacyof110lm/Wwith beam angle 120º to ensure better uniformity of light distribution.

OpticsReflector made up of high purity matt finishanodizedaluminiumsheet.

Electronic driverIn-built, replaceable electronic driver with APFC, THD<33%.

MountingWall or surface mounting using adjustable MS bracket of thickness 2.5mmprovidedwiththefixtureby2elliptical slots of Ø 10mm at a distance of 90mm for 30W and at a distance of 137mm for 50W.

Applications•Signboards•Building&monuments•Billboard•Shopboard


75

System Power Length (L) Width (W) Height (H) Mounting Hole Distance (D)

30W LED 225±2 186±2 151±2 90±1

50W LED 287±2 237±2 170±2 137±1


Technical Drawing

Technical Data

Ordering Code

System Power

Nominal Voltage (V)

Mains Current (A)

Power Factor

Colour Temp. (CCT)


LHEPBFUEIN6W030 30W 240 0.140 >0.95 5000K >80

LHEPBFUEIN6W050 50W 240 0.230 >0.95 5000K >80

Driver code: LHGDRDCBHOA1030 for 30W, LHGDVDDBHQB1050 for 50W.

Front View

DTop View

L

W 25.2

Side ViewH


76

Jeta LinearEnergy saving, environmental friendly, long life, exclusive innovative extruded aluminium flood light with high power LEDs as light source, suitable for highlighting architectural features, retail spaces or border areas.

Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• ExtraordinarylonglifeofLED’s(upto 50,000 burning hrs.) & long lasting LED driver (upto 35,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain mercury• OperatingTemp.range: –20°C to +45°C • Instantlightwithlowrunning temperatures• Significantlylowerrunningcostas compared to conventional tunnel lighting systems

Housing & FinishAnodised black extruded aluminium housing with elegantly designed heat sinkforefficientthermalmanagement,sturdiness & excellent corrosion resistant. Cable gland PG7 is provided at cable entry for maintaining ingress protection.

CoverHighqualitytoughenedglassfixedtohousing with silicon glue.


Electronic driverIn-built electronic driver with 2 output channel each with APFC, THD<15%, Output Short Circuit Protection, Over VoltageProtection,SurgeVoltageProtection & other reliability tests as per IS:15885Part2/Sec13.

MountingWall or surface mounting using adjustableV-shapedAluminiumbracketof thickness 3.5 mm provided with the fixtureby2ellipticalslotsofØ7.5mm.



77

Technical Data

Technical Drawing


System Power

Length (A)

Width (B)

Height (C)

Mounting CD(D)

No. of LED

80W 422±2 230±2 177±2 2 Elliptical Hole Ø 13x50 at CD 199 32



Driver code: LHGDDDBHGRBL080 for 80W, LHGDIDCHERBL100 for 100W, LHGDDDEHERBL150 for 150W.

Ordering Code

System Power

Nominal Voltage (V)

Mains Current (A)

Power Factor

Colour Temp. (CCT)


LHEUACN7PN6K080 80W 240 0.340 >0.98 6000K >90

LHEUACN7PN6K100 100W 240 0.450 >0.95 6000K >90

LHEUACN7PN6K150 150W 240 0.640 >0.95 6000K >90

Side ViewCable Gland PG7

CTop View

Bottom View

A

Ø13

B

D 17


78

Jeta Neo 120/150Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source, suitable for highlighting architectural features or retail spaces.

Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• ExtraordinarylonglifeofLED’s(upto 50,000 burning hrs.) & long lasting LED driver (upto 35,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury• OperatingTemp.range: -20°C to +45°C• Instantlightwithlowrunning temperatures• Significantlylowerrunningcostas compared to conventional tunnel lighting systems

Housing & FinishEpoxy powder coated die-cast aluminiumhousing(LM24)ingreyfinishwith elegantly designed heat sink for efficientthermalmanagement,sturdiness& excellent corrosion resistant. Cable gland PG9 is provided at cable entry for maintaining ingress protection.

CoverHighqualitytoughenedglassfixedtohousing with 8 nos. screws.


Electronic driverIn-built electronic driver (with 2 output channel each) with APFC, THD<10%.

MountingWall or surface mounting using adjustable MS bracket of thickness 2.5mmprovidedwiththefixtureby2elliptical slots of Ø 9.0mm at a distance of 146mm for 120W, Ø 12.5mm at a distance of 178mm for 150W.



79

Technical Data

Technical Drawing

Driver code: LHGDDDCHERBL120 for 120W, LHGDDDEHERBL150 for 150W.

Top ViewD

Front ViewL

Side ViewW

H

68

LockingBolt

Ordering Code

System Power

Nominal Voltage (V)

Mains Current (A)

Power Factor

Colour Temp. (CCT)


LHEPCZU7P46J120 120W 240 0.640 >0.98 6000K >80

LHEPCZU7P46J150 150W 240 0.640 >0.98 6000K >80


System Power

Length (L)

Width (W)

Height (H)

No. ofLED

Mounting HoleDistance (D)

120W 427±2 325±2 200±2 48 146±1

150W 427±2 325±2 236±2 64 178±1


80

Jeta Pro 200/240/300Energy saving, environmental friendly, long life, exclusive innovative pressure die-cast aluminium flood light with high power LEDs as light source, suitable for highlighting architectural features or retail spaces.

Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• ExtraordinarylonglifeofLED’s(upto 50,000 burning hrs.) & long lasting LED driver (upto 35,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury• OperatingTemp.range: -10°C to +45°C• Instantlightwithlowrunning temperatures• Significantlylowerrunningcostas compared to conventional tunnel lighting systems

Housing & FinishEpoxy powder coated pressure die-cast aluminiumhousing(LM24)ingreyfinishwith elegantly designed heat sink for efficientthermalmanagement,sturdiness& excellent corrosion resistant. Cable gland is provided at cable entry for maintaining ingress protection.

CoverHighqualitytoughenedglassfixedtohousing with SS screws.


Electronic driverIn-built (2 nos.) electronic driver (with 2 output channel each) with APFC, THD<10%.

MountingWall or surface mounting using adjustable MS bracket of thickness 2.5mmprovidedwiththefixtureby2elliptical slots.



81

Technical Data

Technical Drawing

Ordering Code

System Power

Nominal Voltage (V)

Mains Current (A)

Power Factor

Colour Temp. (CCT)


LHEPDFU7P47J200 200W 240 0.920 >0.90 6000K >80

LHEPDFU7P46J240 240W 240 1.100 >0.90 6000K >80

LHEPDFU7P46J300 300W 240 1.390 >0.90 6000K >85


System Power

Length (L)

Width (W)

Height (H)

Mounting CD (D)

No. of LED

200W 526±2 325±2 252±2 178 96

240W 526±2 325±2 252±2 178 96

300W 665±2 330±2 257±2 178 128

52.5

39.5

Top ViewD

Front ViewL

Side ViewW

H


82

Jeta MiniMini flood light luminaire suitable for 150W Linear Tungsten Halogen double ended lamp.


HousingPressure die-cast aluminium alloy LM24 in IP55 protection.

CoverTempered protective toughened glass, 5mm thick, thermal shock and impact resistant.

FinishEpoxy black powder coated after phosphochromate treatment.

OpticsSymmetrical reflector is made of high purity pre-anodised dimpled aluminium sheet.

Lamp holderIn ceramics with silver plated contacts.

MountingSurface mounting using built in MS powder coated bracket.

Applications•Billboards•Shopboards•Housefunctions•Garden&parks

83


LHFH05115099 150W Halogen 240 0.625 Rx7s 1.00

Technical Data

Technical Drawing


141±190±1

52±1Front View

Side View

185±

2

84

Jeta 1Flood light luminaire suitable for 500W Linear Tungsten Halogen/70W Metal Halide double ended lamp.



CoverTempered protective toughened glass, 5mm thick, thermal shock & impact resistant.

FinishEpoxy powder coated black after phosphochromate treatment.

OpticsReflectors made of high purity pre anodised dimpled aluminium sheet.

Lamp holderIn ceramics & silver plated contacts.

Electric gearUse appropriate control gear, when luminaire used with 70W High Pressure Metal Halide double ended lamp.

MountingWall/ surface mounting using bracket.

Applications•Signboards•Emergencyareas•Constructionsites•Pedestriancrossings

85



Technical Data

Technical Drawing


185±2

263±

2

68±1Front View

128±2

Side View

86

Jeta 2Flood light luminaire suitable for 1000W Linear Tungsten Halogen lamp.



CoverTempered protective toughened glass, 5mm thick, thermal shock & impact resistant.

FinishEpoxy powder coated black after phosphochromate treatment.

OpticsReflectors made of high purity pre anodised dimpled aluminium sheet.

Lamp holderIn ceramics & silver plated contacts.

MountingWall/ surface mounting using bracket.

Applications•Signboards•Emergencyareas•Constructionsites•Pedestriancrossings•Sportsarena

87



Technical Data

Technical Drawing


276±2

100±2

300±

2

Front View

140±1

Side View

88

Jeta 3 NewIntegral wide beam flood light luminaire suitable for 70/150W High Pressure Metal Halide double ended lamp.


HousingPressure die-cast aluminium alloy LM24 forefficientthermalmanagement,sturdiness & excellent corrosion resistant. PG 11 cable gland is provided at cable entry for maintaining ingress protection.

CoverTempered protective toughened front glass, 5mm thick, thermal shock and impactresistant,fixedwithquickrelease hinge-clips for in-position lamp replacement.

FinishEpoxy white powder coated after phosphochromate treatment.

OpticsReflectors made of high purity dimpled pre-anodised aluminium sheet for wide beam. Available in Assymmetric version.

Lamp holderIn ceramics with silver plated contacts.

Electric gearPre-wired with power factor improvement capacitor and super imposed ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately to be wired as per instruction.

MountingSurface mounting using built in heavy duty bracket.

Applications•Signboards•Industrialareas•Constructionsites•Monuments&facadelighting•Sportscomplex

89

Technical Data

Technical Drawing


Ordering Code

Lamp Type

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

CapacitorValue

LHFM04170D99LHBW07170036

1x70W MH DE 240 0.400 Rx7s >0.85 10 mfd

LHFM04115D99LHBW20115036

1x150W MH DE 240 0.820 Rx7s >0.85 20 mfd

Also suitable for 70/150W HPSV double ended lamps.

432±

2

275±2

JETA 3IP65

365±

2

Top View99

Front View

3 Holes Ø11mm

Side View

81±2

90

Jeta 6 RO IP66Integral wide beam long throw flood light luminaire suitable for single tubular 250W/ 400W HighPressureSodiumVapour/MetalHalidelamp.


HousingPressure die-cast aluminium alloy LM24 with dual compartment for better heat desipation.

CoverTempered protective toughened front glass with thermal shock resistance and impactresistance,fixedwith2nos.SSscrews for in-position lamp replacement.

FinishEpoxy grey powder coated after phosphochromate treatment.

OpticsReflectors made of high purity pre-anodised dimpled aluminium sheet for wide beam.




Applications•Signboards•Securityareas•Airportapprons•Highmasttowers•Constructionsites•Sportscomplex

91

Technical Data

Technical Drawing


Ordering Code

Lamp Type

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

CapacitorValue

LHFY37125C99LHGMCJENEAC1250

1x250W SON/MH SET

240 1.320 E 40 >0.85 33 mfd

LHFY37140C99LHGMCKENEAE1400

1x400W SON/MH SET

240 2.200 E 40 >0.85 42 mfd

414±2

512±

3

Top View

302.

5±2

141±2

Front View

• 250W SV/MH• 400W SV/MH

IP-66

92

Jeta 6 NewIntegral wide beam long throw flood light luminaire suitable for single tubular 250W/ 400W HighPressureSodiumVapour/MetalHalidelamp.


HousingPressure die-cast aluminium alloy LM24 with IP65 protection.

CoverTempered protective toughened black colour front glass, 5mm thick, thermal shockandimpactresistant,fixedwithquick release hinge-clips for in-position lamp replacement.

FinishEpoxy white powder coated after phosphochromate treatment.

OpticsReflectors made of high purity pre-anodised dimpled aluminium sheet for wide beam. Available in Assymmetric version.




Applications•Signboards•Securityareas•Airportapprons•Highmasttowers•Constructionsites•Sportscomplex

93

Technical Data

Technical Drawing


Ordering Code

Lamp Type

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

CapacitorValue

LHFY39140C99LHGMCKENEAE1400

1x400W SON/MH SET

240 2.200 E 40 >0.85 42 mfd

402±2

Front View

149±2

423±

2

486±

2

100Top View

94

Ranger 1 New NINon Integral wide beam long throw flood light luminaire suitable for single tubular High PressureSV/MHlampupto400W.


HousingPressure die-cast aluminium alloy LM24 with IP65 protection.

CoverTempered protective toughened front glass, 5mm thick, thermal shock and impact resistant. Fixed to the frame by silicon sealant & to the housing by 2 nos. SS toggles.


OpticsReflectors made of high purity dimpled/peened pre-anodised specular aluminium sheet.


Electric gear*Select appropriate control gear as per selected lamp source & wattage.

MountingSurface mounting using provided bracket with locking holes.5mm with holes of Ø 13mm at PCD of 49mm.

Applications•Arealighting•Highmasttowers•Marshellingyards•Switchyardstations•Monuments&facadelighting•Sportscomplex

95

Technical Data

Technical Drawing


Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket

LHFY46140099 1x400W SON/ MH SET 240 2.200 E 40

*To be used with appropriate rating CG box.

395±2

225±

2

152Top View

152±2

258±

2

Side View

370±

2

96

Jeta AxialSymmetric Non-integral flood light luminaire suitable upto1x400W tubular High Pressure SodiumVapourorMetalHalidelamp.


HousingDie-cast aluminium alloy LM6 provided with handle for ease of handling. Flynut arrangement is provided in housing for lamp replacement.

CoverTempered and toughened protective front glass, 5mm thick, thermal shock & impact resistant (IK08). Fixed to the housing with silicon glue & 4 nos. SS toggles.


OpticsReflector made up of spun aluminium, electrochemically brightened & anodised.



MountingWall/surface mounting using the adjustable mounting bracket of thickness 5mm with holes of Ø 13mm at PCD of 49mm.

Applications•Stadiums•Storageyards•Securityareas•Highmasttowers•Monuments&facadelighting•Nevypier/Jetty/Airportaprons

97

Technical Data


LHFY04240099 upto 400W SON/ MH SET 240 2.200 E 40


Technical Drawing

All dimensions are in mmTolerance ± 2mm

98Back View

1/4”x52mm Fly Nut

446

433

256 177

715

372

Side View

Ø53

7

98

Ranger 2 NINon Integral wide beam long throw flood light luminaire suitable for twin tubular High PressureSV/MHlampsupto400W.


HousingDie-cast aluminium alloy LM6 with IP65 protection.

CoverTempered protective toughened front glass, 5mm thick, thermal shock and impact resistant. Sealed from front side with silicon sealant & held to the housing by 4 nos. SS toggles.


OpticsReflectors made of high purity dimpled/ peened center reflector & pre-anodised specular side reflectors.



MountingSurface mounting using built in heavy duty bracket with locking holes.


99

Technical Data

Technical Drawing





730±2

102Top View

200±2

345±

2

Front View

155±2

100

Ranger 2 Oval NINon Integral wide beam long throw flood light luminaire suitable for twin tubular High PressureSV/MHlampupto400W.


HousingPressure die-cast aluminium housing (LM24)forefficientthermalmanagement,sturdiness & excellent corrosion resistant. PG11 cable gland provided for maintaing ingress protection.

CoverTempered protective toughened front glass, 5mm thick, thermal shock and impact resistant. Fixed to the frame by silicon gasket & to the housing by 6 nos. SS toggles.


OpticsReflectors made of high purity pre-anodised specular aluminium sheet.



MountingSurface mounting using adjustable bracket with locking holes.


101

Technical Data

Technical Drawing




* To be used with appropriate rating CG box.

727±2Top View

164±2Front View

3 Holes Ø12.5 mm

358±

231

4±2

19

102

BeamExclusively designed narrow beam ultra compact integral flood light suitable for single MH SEQ/CMI-T lamp upto 150W.


HousingPressure Die-cast aluminium alloy LM24 in IP65 protection.

CoverTempered protective toughened front glass, 5mm thick, thermal shock and impact resistant.


OpticsReflector made of deep drawn, virgin polished and anodized aluminium facetted sheet. Optics is designed for specificapplicationtoachievevery

narrow beam pattern varying from 5 to 10 degrees.

Lamp holderWhite PBT housing with brass contacts and SS clips.

Electric gearWired with flexible silicon wire using copper wound ferromagnetic ballast, power factor improvement capacitor and super imposed ignitor for reliable ignition upto terminal block.

MountingWall/surface mounting using 2 nos. fasteners. Optical housing attached with

flexible/adjustable arrangement to rotate/aiming light in desired direction.

Applications•Tallstructures•Accentlighting•Distantspotlights•Architecturalfacades•Bordersecurityareas

103

Technical Drawing


Technical Data

Ordering Code

Lamp Type

Nominal Voltage (V)

Mains Current (A)

Lamp Socket

Power Factor

CapacitorValue

LHFM16170C99LHBW07170036

1x70W MHSEQ/CMI-T 240 0.400 G 12 >0.85 10 mfd

LHFM16115C99LHBW20115036

1x150W MHSEQ/CMI-T 240 0.820 G 12 >0.85 20 mfd

295

Front View

Top View

215±2

385±

2

Ø205Side View

Brighten your Worldwith Havells LED

We are now in SOLAR street light.

Benefits of solar LED street lights 1. Fully Renewable and Independent Energy source.

2. Zero Carbon foot prints.

3. Easy to Install. Instant installation and ready to use.

4. No External cabling,Trenching required i.e eliminates the chance of accident due to electric shocks, No trenching & wiring.

5. Ideal solution for Rural and remote areas where power lines are not available.

6. Independent of Grid , the operational costs are minimum.

7. Green technology.

8. No maintenance in initial years

9. Immediate Returns on Investment.

Solar Street light systemA LED based solar street lighting system

consists of a PV Module, control electronics,

battery, and LED based luminaries, all suitably

mounted on a pole. The battery is charged by

electricity generated through the PV module

during day time and the luminaries provides

light from dusk to dawn.

Applications• Street Lighting

• Perimeter Security Lighting

• Park Lighting

• Campus Lighting

• Pathway Lighting

• Remote Area Lighting

• Farm Lighting

• Ship Dock Lighting

• Railway Yard Lighting

Why Havells Solar LED Luminaire

Havells LED Luminaries delivers the best in class lumen efficacy. They deliver the maximum light output (lumens) at the lower wattage .

About MPPT

Havells LED street lighting systems are designed with MPPT (Maximum Power Point Tracking) which provides about 25% more efficiency by utilizing maximum energy harvested by solar PV modules.

About Solar PV module

Highly efficient poly crystalline solar modules are used which are tested for longer durability & manufactured with innovative technologies. These modules are designed to withstand highly corrosive atmospheres and heavy wind loads. Also the modules are certified for industry standards IEC61215,IEC61730( safety class 1 & 11), IEC61701 and CE.

Product Offerings.1. Standard systems ( this is offered with Preset specification with various wattages to suit,

Specs of Govt., private and PSU’s)

2. Customized solutions can be offered with one to one meeting with end user.

3. Hybrid system which would operate on AC ( alternate current, i.e in presence of GRID supply and DC ( Direct current in ABSENCE of grid supply) it would work in Either Circumstances.

Havells – Lighting up the wayHavells India Limited is a USD 1.4 billion Indian multinational company. Havells is also the 4th

largest lighting company of the world. The company owns a large product portfolio in consumer

and professional lighting, and caters to indoor, outdoor and specialty lighting segments.

Havells’ strength is its manufacturing capability. Havells is the only company in India that

manufactures its entire lighting product portfolio in-house. The company has established a state-

of-the-art, technologically advanced manufacturing plant at Neemrana, Rajasthan to manufacture

luminaires and fixtures. The ultra-modern manufacturing plant is a replica of Havells manufacturing

in France, and contains sophisticated processes like robotic box bending machines. Supported

by German, Italian and Japanese technology, the colossal manufacturing unit is spread over 2

lakh square feet, and churns out 5 million CFLs every month.

Havells lighting business is strongly supported by its dealership network of over 20,000 across

the world. In 2007, the company made history by acquiring the legacy European lighting brand

‘Sylvania’. The acquisition strengthened Havells lighting in the global markets.

Professional Luminaires Lighting Solutions

Industrial Lighting & Area Lighting Catalogue 2015

LP/Z

HLR

C00

017/

/MA

R15

/OC

T15

REGIONAL & BRANCH OFFICES:

NORTH - REGIONAL OFFICE: Corporate Office: QRG Towers, 2D, Sector-126, Expressway, Noida-201304, Tel: 0120-3331000, Delhi: Tel: 011-47676700, 23888200, Chandigarh: Tel: 0172-4232400-401, Dehradun: Tel: 0135-6670202, Noida / Haryana: Tel: 0120-3331000, Ludhiana: Tel: 0161-4676000 / 24, Jammu: Tel: 0191-2478330, 2479330, Sri Nagar: Tel: 0194-2490431, Jaipur: Tel: 0141-3914645, 3988210 Jodhpur: Tel: 0291-9214201640 / 45, Lucknow: Tel: 0522-6672100, Kanpur: Tel: 0512-6710400, 6710409

EAST - REGIONAL OFFICE: Kolkata: ICC Tower, 5th Floor, 4 India Exchange Place, Kolkata-700001, Tel: 033-40129851 / 52, Bhubaneshwar: Tel: 0674-6668101/102/103/104, Guwahati: Tel: 0361-2134521, 2458923, 2460355, Siliguri: Tel: 0353-2525907, Ranchi: 0651-2244861, 2244862, 2244864, 2244868, 2244869, Jamshedpur: Tel: 0657-6542492, 09234369436, Patna: Tel: 0612-2207221, 2207222, 2207223, 2655518

WEST - REGIONAL OFFICE: Mumbai: 301, Everest House, 3rd Floor, 6, Suren Road, Chakala, Andheri (E). Mumbai - 400 093, Tel: 022-67298600-602, Ahmedabad: Tel: 079-40061111, 40060738-740, Indore: Tel: 0731-2572340-41, 4009998 (Airtel), Rajkot: Tel: 0281-2481112, 2921212, Nagpur: Tel: 0712-2240932, 2242692, 2242699 Pune: Tel: 020-64016413 / 14, Raipur: Tel: 0771-4243400 / 01, Surat: Tel: 0261-2350137, 9979890137, Jabalpur: Tel: 0761-4064491

SOUTH - REGIONAL OFFICE: Chennai: Sigapi Achi Building, No. 18 / 3, 6th Floor, Rukmani Lakshmipathy Road, Egmore, Chennai-600008, Tel: 044-42280600, 605, Bangalore: Tel: 080-49075000, Coimbatore: Tel: 0422-2305767, 2306199, 2305199, Hyderabad: Tel: 040-27533372, 27533355, 27533632, 66320407/0408/6401/6402, Kochi: Tel: 0484-4099000, Vishakapatnam: Tel: 0891-6514339, Vizag: Tel: 0891-6514339, Vijayawada: Tel: 91+9247058847/57, Calicut: 4954019194, Madurai: 09994493242, Trivandrum: 4714015323, Hubli: 09448146028, Trichy: 09944460160

Representative Offices: • Goa • Solapur • Gwalior • Kathmandu • Bhopal

Although every effort has been made to ensure accuracy in the compilation of the technical detail within this publication,however current details should therefore be checked with Havells Group. Specifications & performance data are constantly changing.

Industrial Lighting &

Arae Lighting C

atalogue 2015

Havells India Ltd. QRG Towers, 2D, Sector -126, Expressway, Noida - 201 304 (UP), Ph. +91-120-3331000,E-mail: [email protected], www.havells.comConsumer Care No.: 1800 11 0303, 1800 103 1313 (All Connections), 011-4166 0303 (Landline)Join us on Facebook at www.facebook.com/havells and share your ways to save the planet!

CIN - L31900DL1983PLC016304.

Pole Diagram for SOLAR street light:

LED

Controller

Highly effecient controller to charge yourbatter ies & microcontroler control led a lgor i thms for l ight management to ensure maximum uptime. Microcontroller managed algorithms autonomously determinesunrise & sunset.

Only Tier 1 make poly crystalline siliconsolar panels with high efficiency & longlifetime area used.

High Lumen LED modules for maximum efficacy with lifetime > 50,000 hrs & CRI nominal 70.Pressure Die cast Aluminium IP66 enclosure offer excellent water-proofing & humidity barrier.

Specific deep discharge batteries are used to store the energy, provide energy for immediate requirements, and enable a back-up for days when there is little or no sun.

High Lumen with Pressure offer excellent water-proofing & humidity barrieroffer excellent water-proofing & humidity barrierof

Specific timmediate requirements, and enable a back-up for days when there is little or no sun.

Date post:	02-Jan-2017
Category:	Documents
Upload:	doanhanh
View:	246 times
Download:	10 times

Professional Luminaires Lighting Solutions

Documents