Professional wood chippers for Chipping:

shrubswaste woodtrunk wood

and much more

Energy in Balance with Nature

German Quality since 1982

2

Factory Maicha

Heizohack HM 4 since 1989

Heizomat

Energy in Balance with Nature

In 1982 Robert Bloos created the first discharging system for woodchips. The idea behind it was to burn wood from his own forest with the same comfort as with fossil fuels.

We now produce products encom-passing all things around woodchips at two locations in Bavaria, Germany. The core business is woodchip boilers, which we have been able to install more than 35.000 units in more than 30 countries. Chipping machines, fill-ing equipment for woodchip storages, woodchip transportation systems, grippers and innovative solar trackers round off our product range.

We are convinced that heating with woodchips continues to be the best alternative for fossil energy sources. Thanks to sustainable forestry, the planting of fast-growing trees on plantations, along streams and on the sides of fields and roads, we will be able to continue to generate afforda-ble and CO2 neutral energy in balance with nature.

3

Overview

• Production in Bavaria

• Factory 1 - Maicha - management - sales - construction - operation scheduling - development - software programming - logistics - service - trainiee workshop - electric cabinet building - chipper final assembly - paintshop - special construction - turning plant - shipping - laser and folding - laundry - chipper repair center

• Factory 2 - Heidenheim - chipper construction - boiler construction - sawmill - pipe laser - construction of small parts

• 240 employees in Bavaria• 400 employees worldwide

Factory Heidenheim

damals wie heute - made in Germany

4

Specifications*:

Max. Infeed height: Transport height: Transport width: Working height: Working width: Ejection height: Conveyor belt: In-feed Table length: Pressure roller Ø: Standard-sieve: Chipping drum Ø:Flywheel Ø: Drive:

HM 4 - 300

Infeed width:Length:Weight:- on chassis: - 3-point-linkage:Performence:at 540 rpm at 750 rpmFlywheel mass:

HM 6 - 300

Infeed width: Length:Weight:- on chassis: - 3-point-linkage:Performence:at 540 rpmat 750 rpmFlywheel mass:

Chassis:

• Chassis 25 km/h no braking device

• Chassis 25 km/h with cable handbrake

• Tyres 10/75-15.3• Height of towing port:

800 mm to 900 mm adjustable or Hitch - height of towing port with 500 mm

300 mm2422 mm2265 mm

850 mm2965 mm

3419 mm600 mm900 mm380 mm

35/40 mm450 mm

1120 mmmax. 750 rpm

330 mm3213 mm

1850 kg1560 kg

60 kW / 82 HP90 kW / 122 HP

130 kg

500 mm3.382 mm

2250 kg1740 kg

60 kW / 82 HP90 kW / 122 HP

130 kg

*all informations with chassis

HM 4 / 6 - 300

5

electric motor drive

3-point-linkage extension with free wheel

Speed of infeed adjustable by flow divider

Exchange blades

Discharge date adjustmentmanuel

Options and Highlights

6

Specifications:

Max. Infeed height: Transport height: Transport width: Working height: Conveyor belt:Infeed Table length: Pressure roller Ø: Standard-sieve: Chipping drum Ø:Flywheel Ø:

HM 6 - 300 VM (Hatz)

Infeed width: Ejection height: Support load: Length:Weight:Flywheel mass:Exhaust standard:Diesel engine:

HM 6 - 300 VM (Cat)

Infeed width:Ejection height: Suppord load: Length:Weight:Flywheel mass:Exhaust standard:Diesel engine:

Chassis:

• ALKO - chassis tandem with 80 km/h approval

• Overrun brakes or air brake system

• Height of towing port max. 910 mm

• Tyres 225/70 R14

300 mm2782 mm2110 mm

960 mm600 mm900 mm380 mm

35/40 mm450 mm

1120 mm

500 mm3681 mm

100 kg4520 mm

3500 kg130 kg

EU Stage II48 kW / 65 HP

air-cooled

500 mm2800 - 4000 mm

100 kg4520 mm3.500 kg

130 kgTier 4 final

55 kW / 75 HPwater-cooled

HM 6 - 300 VM

7

water-cooled CAT-engine

massive turnable assembly - 270° rotatable

80 km/h ALKO chassis

underrun guard

height-adjustable drawbar with coupling ring or trailer ball

Options and Highlights

8

Specifications:

Max. Infeed height: Transport height: Transport width: Working height: Working width: Max. Ejection height: Conveyor belt: Infeed Table length: Pressure roller Ø:Standard-sieve: Chipping drum Ø:Flywheel Ø: Performence:at 540 rpmat 750 rpm

HM 5 - 400

Infeed width:Support load:Length:Weight:Flywheel mass:

HM 6 - 400

Infeed width:Support load: Length:Weight:Flywheel mass:

HM 8 - 400

In-Feed width:Support load: Length:Weight:Flywheel mass:

Chassis:

• Chassis 25 km/h with cable handbrake

• Chassis 40 km/h with spring loaded pneumatic break

• Tyres 400/60 - 15.5• Height of towing port:

850 - 950 mm adjustable or Hitch - height of towing port with 500 mm

400 mm2588 mm2265 mm

790 mm3105 mm4100 mm

600 mm900 mm450 mm

35/40 mm495 mm

1370 mm

100 kW / 136 HP139 kW / 190 HP

420 mm820 kg

3343 mm3100 kg

300 kg

500 mm910 kg

3427 mm3200 kg

300 kg

670 mm1200 kg

3596 mm3800 kg

470 kg

all informations with chassis

HM 5 / 6 / 8 - 400

9

Hitch - height of towing port 500 mm

top pressure roller Ø 400 mm with conveyor belt

own oil supply

discharge chute and flap electrical

integrated toolbox incl. tools

Options and Highlights

10

Highlights und Optionen

conveyor belt at the infeed table aggressive and powerful material feed-in,

can used as a funnel

multipiece counterknife with hardmetal plates

camera and LED headlightsplaced at the discharge chute

for best view

sieve different sieves for

individual wood chips

3-point linkage or chassisindividual transport options

height adjustable discharge chute with own oil supply hydraulically adjustable

• maximum life time• easier maintenance work• better chipping quality

11

hydraulic block incl. lever for manual operation

radio remote control various hydraulic functions

adjustable via radio

central lubrication pointseasy and fast lubrication

discharge chute rotatable drive via electric motor

speed-regulated in-feedanti-stress-control

cone splitter for pre-splitting of logs

automatic central lubricationeasy and fast lubrication

12

Specifications:

Max. Infeed height:Infeed width:Transport height: Transport width: Max. Ejection height: conveyor belt: In-feed Table length: Pressure roller Ø:Standard-sieve:Chipping drum Ø: Flywheel Ø:

HM 8 - 400 KFwithout crane

Support load:Working height: Length:Weight:Flywheel mass: Performence:at 1000 rpm

HM 8 - 400 KFL with crane (Epsilon C45F84)

Support load:Working height: Length:Weight:Flywheel mass:Performence:at 1000 rpm

Chassis:

• 40 km/h trailing axle chassis• 40 km/h trailing axle chassis

for crane installation• Spring-loaded pneumatic brake• Tyres 385/55 R22.5• Tyres 400/55 22.5• Tyres 500/45 22.5• Tyres 560/45 R22.5• Height of towing port:

500, 600, 900 and 1000 mm

400 mm708 mm

3210 mm2464 mm4400 mm

900 mm1500 mm

600 mm35/40 mm

495 mm1370 mm

1600 kg 1150 mm4450 mm

6000 kg470 kg

148 kW / 200 HP

1300 kg 1420 mm4730 mm

8260 kg470 kg

148 kW / 200 HP

all informations with chassis

HM 8 - 400 K

13

top pressure rollerØ 600 mm

conveyor belt at the infeed table

hydraulic control block

height adjustable 500, 600, 900 and 1000 mm

massive V-belt transmission

Options and Highlights

14

Specifications:HM 6 - 300 KLC

Max. Infeed height:In-feed width:Transport height: Transport width:Working height:Conveyor belt:In-feed Table length: Pressure roller Ø:Standard-sieve:Chipping drum Ø:Flywheel Ø:Weight: Support load:Flywheel mass:Performence:at 1000 U/minLoad volume:Rear tipperHigh tipper

HM 8 - 400 KLC

Max. Infeed height:In-feed width: Transport height: Transport width:Working height:Conveyor belt:In-feed Table length: Pressure roller Ø:Standard-sieve:Chipping drum Ø:Flywheel Ø:Weight: Support load:Flywheel mass: Performence:at 1000 U/minLoad volume:Rear tipperHigh tipper

Chassis:

• 40 / 60 km/h• Tyres

385/65 R22.5 500/45 22.5 560/45 R22.5 600/50 R22.5 620/50 R22.5

300 mm 500 mm

3900 mm2550 mm1200 mm

600 mm1050 mm

380 mm35/40 mm

450 mm1120 mm10000 kg

2350 kg130 kg

132 kW / 180 HP

10 m³8 oder 13 m³

400 mm 708 mm

3900 mm2550 mm1400 mm

900 mm1500 mm

600 mm35/40 mm

495 mm1370 mm13800 kg

3600 kg130 kg

148 kW / 200 HP

17 m³13 oder 16 m³

all informations with chassis and crane

HM 6 - 300 KLC HM 8 - 400 KLC

15

rear tipper

crane up to 8,4 m

central lubrication points

compact construction ontandem chassis

Options and Highlights

high tipper up to 4 m height

16

Specifications:

Max. Infeed height: Transport height:Transport width: Working height:Working width: Flywheel mass:Conveyor belt:In-feed Table length:Pressure roller Ø:Standard-sieve:Chipping drum Ø:Flywheel Ø:

HM 8 - 500 KF

Infeed width:Max. Ejection height: Length:Support load:Weight:

HM 10 - 500 KF

InFeed width:Max. Ejection height: Length:Support load:Weight:

HM 14 - 800 KF

In-feed width:Max. Ejection height: Length:Support load:Weight:

Chassis:

• Chassis 40 km/h with trailing axle, spring-loaded pneumatic brake

• Tyres: 385/55 R22.5 400/55 22.5 500/45 22.5 560/45 R22.5

• Height of towing port: 500 or 1000 mm

708 mm4290 mm4610 mm

2160 kg7420 kg

800 mm2900 mm2700 mm1200 mm4140 mm

1000 kg900 mm

1500 mm800 mm

45/60 mm 495 mm

1370 mm

1215 mm4660 mm5120 mm

3000 kg9500 kg

877 mm4660 mm4780 mm

2400 kg8100 kg

all informations with chassis without crane

HM 8 / 10 - 500 K HM 14 - 800 K

17

Easy resharpeningfrom Quick-Exchange blades

front end roller with heavy hydraulic drive

top pressure rollerØ 800 mm

wear plate armoured

heavy flymass for high performence

Options and Highlights

18

Specifications:

Max. Infeed height:Transport height: Transport width:Working height:Working width:Max. Ejection height: Flywheel mass:Conveyor belt:In-feed Table length:Pressure roller Ø:Standard-sieve:Chipping drum Ø:Flywheel Ø:

HM 10 - 500 KTL

In-feed width: Length:Support load:Weight:

HM 14 - 800 KTL

In-feed width: Length:Support load:Weight:

Chassis:

• Chassis-tandem 40/60 km/h with short drawbar

• Chassis-tandem 40/60 km/h with long draw bar

• Dual line air brakes• Tyres:

385/55 R22.5 400/55 22.5 560/45 R22.5

877 mm4740 mm

1400 kg13000 kg

800 mm3650 mm2980 mm1620 mm4300 mm5080 mm

1000 kg900 mm

1500 mm800 mm

45/60 mm495 mm

1370 mm

1215 mm5080 mm

1500 kg14900 kg

HM 10 - 500 KTL HM 14 - 800 KTL

all informations with chassis and crane

19

Automatic trailer coupling with compressed air connection

discharging chute telescopic

special-sieve with stop-bars

3 cross augers

rotor cover with extra sieve

Options and Highlights

20

Specifications:

Max. Infeed height:In-feed width:Transport height: Transport width:Working height:Working width:Max. Ejection height: Length:Conveyor belt:In-feed Table length:Pressure roller Ø:Standard-sieve:Chipping drum Ø:Flywheel Ø:support load:Weight:

Chassis:

• Chassis-tandem Tandem 40/60/80 km/h

• Dual line air brakes• Tyres

600/50 R22.5

800 mm1215 mm3650 mm2980 mm1620 mm4300 mm5330 mm5800 mm

900 mm1500 mm

800 mm45/50 mm

690 mm1370 mm

1840 kg15660 kg

HM 14 - 860 KTL

all informations with chassis and crane

21

Reduced speed forless fines content

multipiece sieve for easy exchange

hydraulic cone splitter

tandem-chassis with 80 km/h

zyclon for dust reduction

Options and Highlights

22

Specifications:

Max. Infeed height:Infeed width:Transport height: Transport width: Working height:Working width: Max. Ejection height: Conveyor belt:In-feed Table length:Pressure roller Ø:Standard-sieve:Chipping drum Ø:Flywheel Ø:

HM 14 - 860 KL (3351)

Length:Weight:Performence:Cubic capacity:Speed:

HM 14 - 860 KL (3353)

Length:Weight:Performence:Cubic capacity:Speed:

Mercedes Benz AROCS:

• 6x6 all-wheel drive• Track 2000 mm• Wheelbase 3900 mm• Tyres front axle

385/65 R22.5• Single tyres rear axle

600/50 R22.5• Twin tyres rear axle

315/80 R22.5

800 mm1215 mm3950 mm2550 mm1800 mm3800 mm5450 mm

900 mm1500 mm

800 mm45/50 mm

690 mm1370 mm

7.800 mm 26.000 kg

375 kW / 510 HP12,8 Liter

1300 - 1600 rpm

HM 14 - 860 KL

7.800 mm 26.000 kg

390 kW / 530 HP12,8 Liter

1300 - 1600 rpm

23

direct drive from the engine of the complete performence

incl. full warranty

reversible fan

Comfortable workplace

Move lorry, without stopping chipper by activated NMV.

All functions can be controlled from the working seat

Options and Highlights

24

Specifications C45F67 C45F84 C60F86 M70F101 M80F101

max. Hubmoment Netto: 53 kNm 51 kNm 61 kNm 65 kNm 75 kNm

max. torque: 6,7 m 8,4 m 8,6 m 10,1 m 10,1 m

max. hoist power at 4 m: 1310 kg 1250 kg 1510 kg 1610 kg 1880 kg

max. hoist power at 6 m: 850 kg 800 kg 980 kg 1070 kg 1240 kg

max. hoist power at 8 m: - 580 kg 720 kg 760 kg 890 kg

max. hoist power at 10 m: - - - 540 kg 660 kg

max. swivel torque: 14 kNm 14 kNm 20 kNm 26 kNm 29 kNm

pivoting range: 340° 340° 425° 385° 385°

weight: (ohne Gelenk / Rotator) 1020 kg 1100 kg 1170 kg 1730 kg 1760 kg

working pressure: 170 bar 170 bar 200 bar 215 bar 240 bar

pump output: (LS) 120 l/min 100 l/min 100 l/min 130 l/min 130 l/min

rotator: (Epsilon) RB06F RB06F RB06F G121 G121

HM 8 - 400 KFL • • - - -

HM 6 - 300 KLC • • - - -

HM 8 - 400 KLC • • - - -

HM 8 - 500 KFL • - - - -

HM 10 -500 KTL - - • • -

HM 14 - 800 KTL - - • • -

HM 14 - 860 KTL - - • • -

HM 14 - 860 KL - - - - •

25

Specifications HG 1000 HG 1250total tonnage: 2000 kg 3000 kg

working pressure: 200 bar 200 bar

total weight: 125 kg 160 kg

total opening (A): 1021 mm 1321 mm

total height: 644 mm 680 mm

total width (B): 324 mm 398 mm

C45F67

C45F84

C60F86

M70/80F101

26

Since 1982 we have been producing sus-tainable heating systems with the main focus on renewable energy. Many of our inventions have become state of the art in our sector and make the automated burning of wood as easy as burning oil or gas. Our specialised components like the chain discharging system, the paten-ted parallel motion discharging system and the new ET200 control unit conti-nue to tranform biomass heating tech-nology leading the way to the future.

Heizomat heating systems:

• power output range 15 kW - 990 kW

• efficiency > 90%• combustion champer made from• automatic de-ashing • ash-bin 40 l, 270 l or 900 l• heat exchanger with 6,3 mm

wall thickness • automatic ignition • insulation by 80 mm

Heizotrans

• ideal bunker filling system for every situation

Heizogreif forest pliers

• for crane, digger und front-loader• opening 1.500 mm• width up to 1.800 mm• design 3/2, 4/3 or

5/4 with massive steel tooth• with mounting bracket for Euro 3

or other systems

Heizoschaufel - Heizoshovel

• with 1 m³, 2 m³ or 3 m³• with mounting bracket for Euro 3

or other systems

Heizogreif Forstzangen

Heizotrans Senkrechtschnecke

Biomasseheizanlage RHK-AK

More than wood chippers

27

Heizotruck V1 - (Landwirtschaft) Heizotruck V2 - (Forstwirtschaft)

Stream Space - KabineClassic Space - Kabine

options:

• front hydraulic

• fifth wheel plate

• toolbox• rotating light

• tractor tyres 495/70 R24

• ISOBUS interface • warning flasher

standard equipment:

• panoramic window

• rear PTO

• trailer hitch bolt Ø 38 mm

• load sensing hydraulics

• tyres 14.00 R20

• front plate • reversible fan

• combi-tank diesel or hydraulic

• rear view camera

• LED light system

• 12V inverter

• Compressed air hose reel

• hitch K80 with K50

Grüne Heizomat-Energie, weltweit!

Energy in Balance with Naturetechnical changes, which serve the continuous further development, are reserved. Dimensions and weights are all approximate!

PM-88-004-00016 • 01/2018

Heizomat Gerätebau- Energiesysteme GmbH Maicha 21 • 91710 Gunzenhausen

Tel.: +49 (0) 9836 97 97 - 0 Fax: +49 (0) 9836 97 97 - 97

info@heizomat.de • www.heizomat.de

our partner:

Since 1982, approximately 400 employees and more than 35,000 customers worldwide contribute to a heat and energy revolution! Be a part of it!