DOB: 01 – July –1970 Teaching&Industry Experience:19 years as on 01/03/2017.
Publications: International &National Journals:98+6 = 104 International & National Conferences:60+25=85
Research Projects:5, Completed: 5.
Sl.No Sponsoring Agency & Title of the Project Grants-in-aid (Rs) (Lakhs)
Status
Major
1. DST/SERB (Govt. of India) –Design and Development of Metal MatrixComposites
(Al-SiCp) using Friction Stir Processing 39.00
Completed (2016)
2. DRDO/ER&IPR(Govt. of India) - Experimental and Numerical studies on Twist
Extrusion Process of Aluminium Alloys in Aerospace Industries 24.10
Completed (Dec 2014)
3. DRDO/NRB (Govt. of India) - Experimental and Numerical studies of Friction Stir
Welding of AZ31B Alloy 24.00
Completed (Mar 2013)
4. UGC Major research scheme (Govt. of India) – “Investigations on friction stir
processing of cast Aluminum alloys used in automobile industries” 9.91
Completed (Aug 2011)
Minor 5. Student innovative projectSponsored by CTDT – Multiple-Pass Friction Stir
Welding and Processing of 2014 Aluminum Alloy 0.25
Completed (Oct 2011)
Areas of Interest: Production Engineering - Metal Forming, Super plastic forming, Warm Deep Drawing, Incremental Forming, Profile Forming, Twisted Extrusion, Hydro forming,Machining of Mnemonic Alloys, Computer Aided Process Planning, Friction Stir Welding,Friction Stir Processing of Al and Mg alloys, Composite Machining, Supply Chain management.
PhD Guidance: Completed –14, Ongoing – 10.
Journal Reviewer: Journal of Materials & Design, Materials & Manufacturing Processes, Surface & Coatings, Journal of Material Processing Technology International Journal of Advanced Manufacturing Technology
Achievements/Awards:
Received Active Researcher Award from the Vice- Chancellor Anna University, during the Teachers Day celebrations held at Anna University, Chennai-25 on 5 September 2013.
Received Best Paper Award in the International Conference on Advances in Industrial Engineering Applications (ICAIEA 2010) held at Anna University, Chennai-25 on 6-8 January 2010.
TEAM TECH 2004 Award received for best Paper Presentation in the International Conference held at IISc, Bangalore on Nov 2-4 August 2004.
Principal Investigator for Four funded research projects forUGC ,DRDO/(NRB,ER&IPR)& DST/SERB (On going).
Books Published:5 Authored a book “Manufacturing Technology II “in Tamil published by Academic Course, Anna University in the year 2013.
Co AuthoredProfessional Ethics and Human Values - Prentice Hall of India - 2013
Co AuthoredManufacturing Technology Lab Manual-II in Tamil published by Academic Course, Anna University in the year 2012.
Co AuthoredBasic Engineering Practices Lab Manual in Tamil published by Academic Course, Anna University in the year 2011. Co AuthoredEngineering Ethics and Human Values - Prentice Hall of India – 2004.
Book Chapters: 2 V.S. Senthil kumar,C.Ezilarasan, “Soft Computing Applications in Drilling of GFRP Composites: A Review” Materials Science Forum
An Indian patent filed through IPR, Anna University, Chennai in the area of Manufacturing of Fuel Cell, App. No. 1544/CHE/2010.Dtd: 3/06/2010
An Indian patent filed through IPR, Anna University, Chennai in the area of Friction Stir Welding, Appn. No 3002/CHE/2014.Dtd: 20/06/2014
Responsibilities-Academic:
Delivered online Lecture for Affiliated Engineering College students through AnnaEduSatprogram from 09-01-2012 till30-04-2012.
Organized an International Workshop as a Coordinator – EMFT 2010 – during 11th-12
th,November 2010
Organized an International Conferenceas aAssistant Organizing Secretary – AMPC 2006during 28th-30
th,August 2006
Examiner for Ph. D. Thesis for Visveswarayya Technological University, Karnataka; Andhra University, OsmaniyaUniversity,JNTU,Andhra Pradesh; and Bangalore University, Bangaluru.Multimedia University,Malacca Campus, Malaysia..
Board of studies member for Bharat University& Tamil Nadu sports University.
Exam Result Passing Board member for Government college of Technology, Coimbatore.
2 | P a g e
Question Paper Setter for the Anna University Technology Chennai, Anna University Technology Thirunelveli, Anna University & Annamalai University, Annamalai Nagar, Chidambaram.
Responsibilities-Administrative:
Serving as Additional Director for Centre for Technology Development and Transfer, Anna University, Chennai from -----25.02.2015 to Till Date
Served as Deputy Controller of Examinations (Distance Education), Anna University, Chennai from 09.08.2007 till 17.01.2013.
Serving as PhD/MS thesis Scrutiny Committee member from 08.05.2012. Served as PG Exams Chief Superintendent &Project CoordinatorFor Mechanical Engineering Department 2009-10
Served as Purchase Committee Member For civil Department 2009-2010
Served as University Sports board Member from 2006 to 2009
Served as Assistant Warden, College of Engineering Guindy hostels from 18.03.2006 to 25.07.2008.
Membership in Professional Bodies:
Life member in ISTE, IWS, ORSI, MMS, IAENG, F ISME, MRSI, ASME,FIE.C.Engg
Contact: Department of Mechanical Engineering, Anna University, Chennai, India 600025,
G.Gopalarama subramaniyan, V.S. Senthil Kumar R. Karthikeyan
Optimization of Process Parameters using Meta-Heuristics Algorithms for the Manufacturing of Leaf Spring Assembly
2012 International Journal of Operational Research, Vol. 15, No. 1, p 16-29
Inder science
0.7
64. S. Chezhian Babu, V.S. Senthil Kumar
Experimental studies on incremental forming of stainless steel AISI304 sheets
2012
Proceedings Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, Vol. 226 (7), pp. 1224–1229
SAGE 0.7
65.
K. Palanikumar, B. Latha, V.S. Senthil Kumar, J. Paulo Davim
Analysis on drilling of GFRP composites using grey relational analysis
2012 Materials and Manufacturing Processes, Vol. 27, pp. 297-305
Taylor & Francis
0.5
66. G.Gopalarama subramaniyan, V.S. Senthil Kumar
Multi response optimization of the hole punching process parameters in the leaf spring assembly using the grey taguchi method and simulated annealing algorithm
2012 Applied Mechanics and Materials, Vol. 110 – 116, pp. 1691 – 1695
TTP 0.19
67.
S. Ramesh Babu, V.S. Senthil Kumar, V. Balasubramanian, G. Madhusudhan Reddy
Tensile Properties and Micro structural Evolution of Friction Stir Processed Extruded Az31b Alloy
2012 Applied Mechanics and Materials, Vol. 110 – 116, pp. 606 – 610
TTP 0.19
68. S.P. Shanmuganatan, V.S. Senthil Kumar
Experimental Investigation and Finite Element Modeling on Profile forming of Conical Component using Al3003 (O) Alloy
2012 International Journal of Materials and Design, Vol. 36, p 564-569
Elsevier 1.74
69. E. Pavithra, V.S. Senthil Kumar
Hydroforming Developments: Insights of other Researchers
2012 Applied Mechanics and Materials, Vol. 110-116, pp. 1748-1752.
TTP 0.19
7 | P a g e
70. N. Ethiraj, V. S. Senthil Kumar
Investigation on formability of AISI 304 circular cups by warm deep drawing
2012 Advanced Materials Research, Vol. 418-420, pp. 1410-1417.
TTP 0.10
71. S. Suresh, V.S. Senthil Kumar
An overview of recent research work on the forming of thermoplastic composite sheets
2012 Applied Mechanics and Materials, Vol. 117-119, pp. 764-768
TTP 0.19
72.
C. Ezilarasan, V.S. Senthil Kumar, A. Velayudham, K. Palanikumar
Surface roughness on Machining of Nimonic C-263 alloy using Artificial Neural Network and Response Surface Methodology
2011 International Journal of Precision Technology, Vol.2, No.4, p 340-354
Inderscience
73. P. Ganesh, V.S. Senthil Kumar
Finite Element Simulation in Super plastic forming of Friction Stir Welded Aluminium Alloy 6061-T6
2011 International Journal of Integrated Engineering, Vol. 03, No 1, p. 9–16.
UTHM
74.
C. Ezilarasan, V.S. Senthil Kumar, A. Velayudham, K. Palanikumar
Modeling and Analysis of surface roughness on machining Nimonic C- 263 alloy by PVD coated carbide
2011
Transaction of nonferrous metals society of china-Elsevier publication, Vol. 21, p. 1986-1994
Elsevier 0.54
75. V. Govindarajalu, V.S. Senthil Kumar
Web Based Dss for Inventory and Scrap Optimization in a Printing & Packaging Industry
2011 Advanced Materials Research, Vol.: 335-336, p 599-605
TTP 0.1
76. G.Gopalarama subramaniyan, V.S. Senthil Kumar
Parameter optimization of the sheet metal shearing process in the manufacturing of leaf spring assembly using the grey taguchi method and simulated annealing algorithm
Multi Response Optimization of Submerged Friction Stir Welding Process Parameters using Topsis Approach
13th – 19th November
2015
ASME 2015 International Mechanical Engineering Congress & Exposition, IMECE 2015,Texas, USA.
4. V.S.Senthil Kumar, P.Ganesh, K.A.Padmanabhan
Determination Of Superplastic Material Properties For Parent Material And Friction Stir Welded Joint Of Al-Alloy Aa6061-T6
13th – 19th November
2015
ASME 2015 International Mechanical Engineering Congress & Exposition, IMECE 2015,Texas, USA.
5. A. EsakkyPrasath, K. Balaji, V.S. Senthil Kumar
Identification of optimum stock level of spare parts inventory at ship maintenance dockyard using inventory management tools
07-09th January
2014
Global Supply Chain conference, K.J.Somaiah Institute of Management Studies and Research, Mumbai, India.
6. M. Balasubramanian, K. Ramanathan, V.S. Senthil Kumar
Finite Element Analysis and Analytical Modeling of Superplastic Forming in a Stepped Rectangular Die
6-8th February
2013
Second International conference on Advances in Materials Processing and Characterization (AMPC-2013), CEG, Anna University, Chennai-25.
7.
V.S. Senthil Kumar, C. Ezilarasan, A. Velayudham
Acoustic Emission Based Tool Wear Condition Monitoring While Turning Nimonic C-263 Alloy using PVD Coated Carbide Insert
15-21stNovember 2013
Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE 2013, San Diego, California, USA.
8. V.S. Senthil Kumar, U. MohammedIqbal
Effect of Process Parameters on the Microstructure Homogeneity of AA6082 Aluminium Alloy deformed By Twist Extrusion
15-21st November
2013
Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE 2013, San Diego, California, USA.
10 | P a g e
9. V.S. Senthil Kumar, S.P. Shanmuganatan
Optimization of Process Parameters in Profile forming of Al 3003 (O) aluminium alloy
15-21st November
2013
Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE 2013, San Diego, California, USA.
10.
M. Balasubramanian, K. Ramanathan, P.Ganesh, V.S. Senthil Kumar
Theoretical Prediction on Superplastic Forming of 5083 Al Alloy using Multistage Long Rectangular Die
20-22nd Dec 2013
International Conference on 28th Indian Engineering Congress (IEC 2013), Chennai, Tamilnadu.
11. V.S. Senthil Kumar, S.P. Shanmuganatan
Numerical modelling and Experimental validation of strain behav10ehaviorrofile forming on Al 3003 (O) alloy through incremental forming
20-22nd Dec 2013
International Conference on 28th Indian Engineering Congress (IEC 2013), Chennai, Tamilnadu.
12. S. Deepak kumar K. Balaji, V.S. Senthil Kumar
Application of the Pareto Analysis in finding the highly demanded products used in the automobile rubber components manufacturing unit
20-22nd Dec 2013
International Conference on 28th Indian Engineering Congress (IEC 2013), Chennai, Tamilnadu.
13. S S.Rameshbabu, V.S. Senthil Kumar
The role of forming temperature during superplastic forming of AZ31B magnesium alloy under biaxial stressing
28- 30 November
2013
4thNirma University International Conference held at Nirma University
14. Balaji. K V.S. Senthil Kumar Deepak Kumar. S
Study and Investigation on the role of significant Inventory items in a rubber components manufacturing industry
28- 30 November
2013
4thNirma University International Conference held at Nirma University
15. G. Elatharasan V.S. Senthil Kumar
Microstructural characterization and corrosion behavior of dissimilar AA6061–AA7075 joints produced by Green welding technique (friction stir welding
2013
International Conference on Green Technology in Engineering and Applied Sciences (ICGTEAS–13) Adhiparasakthi Engineering College, Melmaruvathur –
16. M. Dhanashekar, V.S. Senthil Kumar
Selection of optimal warehouse location, based on demand and the shortest distance method
2012 International conference on Application of optimization techniques in engineering (ICAOTE-2012)
17. C. Sakthivel, V.S. Senthil Kumar
Development of cell design by using kings algorithm for engine valve manufacturing
2012 International conference on Application of optimization techniques in engineering (ICAOTE-2012)
18. M.A.V. Cholan, C. Ezhilarasan, V.S. Senthil Kumar
Optimisation of Machining Parameters in Turning of Nimonic C-263 Alloy Using CBN Insert
2012 All India Manufacturing Technology, Design and Research (AIMTDR 2012)
19. N. Radhakrishnan, S. Ramesh Babu, V.S. Senthil Kumar
Investigation of Formability on Friction Stir Processed Magnesium Alloy
2012 All India Manufacturing Technology, Design and Research (AIMTDR 2012)
20. M.A.V. Cholan, C. Ezhilarasan, V.S. Senthil Kumar
Mathematical model for surface Roughness in the machining of Nimonic C-263 super alloy using CBN insert
10-11thApril
2012
International Conference on Modeling Optimisation and Computing (ICMOC 2012),Department of Mechanical Engineering, Noorul Islam Centre for Higher Education, Kanyakumari, Vol.2, pp. 414-424
21. N. Radhakrishnan, S. Ramesh Babu, V.S. Senthil Kumar
Process Optimisation of Friction Stir Processed Magnesium Alloy
10-11thApril
2012
International Conference on Modeling Optimisation and Computing (ICMOC 2012), Department of Mechanical Engineering, Noorul Islam Centre for Higher Education, Kanyakumari, Vol. 2, pp 828-832.
22.
I. Mahaveeran, M. Balasubramanian, K. Ramanathan, V.S. Senthil Kumar
Analytical Modeling and Finite Element Method in Superplasticity Forming in Stepped Rectangular Die
17 & 18 February
2012
International Conference on Intelligent Manufacturing Systems”,SASTRA UNIVERSITY, Thanjavur, Tamilnadu, India
23.
P. Pradeep, S. Ayyanar, M. Balasubramanian, K. Ramanathan, V.S. Senthil Kumar
Advanced Finite Element Analysis in Superplastic Forming Process of Stepped Semispherical Die
17 & 18 February
2012
International Conference on Intelligent Manufacturing Systems”, SASTRA UNIVERSITY, Thanjavur, Tamilnadu, India
24. S. Chezhian Babu, V.S. Senthil Kumar
Parametric Influences during Incremental Forming of AISI 304 Stainless Steel Sheets
9-11th January
2012
International Conference on Advances in Mechanical, Manufacturing and Building Sciences, ICAMB-2012, School of Mechanical and Building Science, VIT University, Vellore, India, p 439-442
25. I. Mahaveeran, Finite Element Analysis and Numerical 9- International Conference on Advances
11 | P a g e
M. Balasubramanian, K. Ramanathan, V.S. Senthil Kumar
Simulation of Superplastic Forming in a Titanium Alloys
11thJanuary 2012
in Mechanical, Manufacturing and Building Sciences, ICAMB-2012, School of Mechanical and Building Science, VIT University, Vellore, India, pp 260-264.
26. S. Suresh, V.S. Senthil Kumar
Mechanical Characterization Studies on Thermoplastic Composite Laminates
9-11th January
2012
International Conference on Advances in Mechanical, Manufacturing and Building Sciences, ICAMB-2012, School of Mechanical and Building Science, VIT University, Vellore, India, p20-24.
27. S. Chezhian Babu, V.S. Senthil Kumar
Parametric Influences (Thickness and Formability) During Incremental Forming of AISI 304 Stainless Steel Sheets
23-24th December
2011
International Conference on Recent Advances in Materials and ProcessingRAMP-2011, Department of Metallurgical Engineering, PSG College of Technology Coimbatore, India, p 425-430.
28. M. Puviyarasan V.S. Senthil Kumar
Experimental studies on AA5083/SiCp surface composites fabricated using friction stir processing
23-24th December
2011
International Conference on Recent Advances in Materials and Processing (RAMP-2011), PSG College of Technology, Coimbatore, India, December 23-24, p COM-I-1
29. C.Ezilarasan, V.S.Senthil Kumar, A.Velayudham
Modeling and analysis of cutting forces in the turning of the Nimonic C-263 super alloy
2011
International conference on Advanced Materials and Processing ICAMP-2011, Department of Mechanical Engineering, RMK Engineering College, Chennai, India.
30. S.P.Shanmuganatan, V.S.Senthil Kumar
Experimental Strategies for Profile forming on Aluminium alloy Al 3003(0)
2011
International Conference on Advancements in Polymeric Materials, Innovations in Materials and product development 2011, CIPET, Chennai,
31. G.Gopalaramasubramaniyan, V.S. Senthil Kumar
A framework of integrated process planning with optimized process parameters for leaf spring manufacturing
2011 Proceedings of ASME, ASME Digital Library, DOI: 10.1115/1.859810, Paper 155.
32. S.P. Shanmuganatan, V.S. Senthil Kumar
Formability and Experimental analysis of profile forming on Aluminium alloy Al3003 (O)
2011
2nd International conference on Mechanical and Manufacturing Engineering, (ICME-2011), UniversitiTun Hussein Onn Malaysia, Malaysia
33. N. Ethiraj, V. S. Senthil Kumar
Microstructure Evaluation of Warm Deep Drawn Component of Stainless Steel AISI 304
2011
2nd International conference on Mechanical and Manufacturing Engineering, (ICME-2011), UniversitiTun Hussein Onn Malaysia, Malaysia
Mathematical Modeling and analysis of process parameters on Turning C-263 Super alloy by PVD coated carbide insert
2010
An international conferences on Advanced manufacturing, materials, management & Thermal sciences (AMMMT-2010), Siddganga Institute of Technology, Tumkur-03, Karnataka, India, MF 15/ 91
35. U.Mohammed Iqbal, V.S.Senthil Kumar
Experimental Investigation on Twist Extrusion process of AA6063 Aluminum Alloy
2010
3rd International & 24th All India Manufacturing Technology Design & Research (AIMTDR – 2010), College of Engineering, Andhra University, Visakhapatnam, Andhra Pradesh, India, Vol. 2, pp 995-999.
Cutting Stock Problem Analysis Using a Swarm Intelligent Approach in Leaf Spring Manufacturing Industry
January 2010
International Conference on Advances in Industrial Engineering Applications, Anna University Chennai, OP 08 / pp. 104
37. V. Govindarajalu, V. S. Senthil Kumar, K. Balaji
Study and Analysis of the Slow Moving Inventory of boards in a printing and packaging industry
2010
International Conference on Operational Research for Urban and Rural Development (ORURD) & 43rd Annual Convention of Operational Research Society of India (ORSI 2010),Thiagarajar College of Engineering, Madurai, OR 155, pp. 55.
38. V. Govindarajulu, Improving On-Time-In-Full Delivery 2009 International Conference on
12 | P a g e
V. Murali, V.S. Senthil Kumar
(OTIF) through Backlog Analysis in a printing and packaging industry
Indigenous Management Practices (ICIMP-2009), Annamalai University, Annamalai Nagar, Tamil Nadu, pp. 390.
39. S.P.Shanmuganatan, V.S.Senthil Kumar
Experimental Investigation On Low Carbon Steel using Incremental Forming Technique
2009
International Conference on Precision, Meso, Micro and Nano Engineering COPEN 6, PSG College of Technology, Coimbatore, pp. A28-34
Effects of Friction stir processing on the Micro hardness and microstructure of Cast LM25 Grade Aluminum Alloy
208
International Symposium of Joining of Materials SOJOM 2008, Welding Research Institute and Indian Welding Society, BHEL,Trichy. p547-554
47. B.Latha, V.S.Senthil Kumar
Analysis of parameters in drilling GFRP composites using ANOVA and Artificial Intelligence
2008
International Conference on All India Manufacturing Technology, Design and Research Conference (AIMTDR 2008), IIT Madras Chennai, India, p867-872
48.
L. Mahesh Kumar, S. Natarajan, V.S. Senthil Kumar, D. Viswanathan
Numerical Simulation and Experimental Study of Rectangular cups in Deep drawing process
2006
International Conference on Recent Advances in Materials and Processing, PSG College of Technology, Coimbatore, p55
49.
L. Karthikeyan, V.S. Senthil Kumar, S. Natarajan, D. Viswanathan
Effect of feed variations on Mechanical properties and Microstructure during FSP of CAST 2285 Aluminum Alloy
2006 International Conference on Recent Advances in Materials Processing, PSG College of Technology, Coimbatore, p71
50.
L. Mahesh Kumar, V.S. Senthil Kumar, S. Natarajan, D. Viswanathan
Numerical simulation and Experimental Validation of Hemispherical Cups in Deep drawing process
2006 International Conference on Advances in Mechanical Engineering, SRM University, Chennai, p258-261.
51. S. Ramesh, L. Karunamoorthy, V.S. Senthil Kumar
Microstructure studies and surface Roughness observations in Machining of Titanium Alloy Ti-6Al -4V
2006
International Conference on Manufacturing Science and Technology ICOMOST2006, Melaka, Malaysia, p82-85
52.
L. Mahesh Kumar, P.Omkumar, V.S. Senthil Kumar, D. Viswanathan, S. Natarajan
Finite Element Analysis and Experimental validation of Deep drawing process
2006
International Conference on Advances in Material processing AMPC 2006, Department of Mechanical Engineering, College of Engineering, Guindy, Anna University, Vol I, pp 434-440.
53.
L. Mahesh Kumar, D.S.S.SrinivasReddy, V.S. Senthil Kumar, D. Viswanathan, S. Natarajan
Finite Element Analysis for Conical Cup Forming
2006
International Conference on Advances in Material processing AMPC 2006, Department of Mechanical Engineering, College of Engineering, Guindy, Anna University, vol. II, pp 780-785
13 | P a g e
54.
L. Maheshkumar, D. Suresh, V.S. Senthil Kumar, S. Natarajan
Evaluation of strain behavior in stretch forming process using numerical simulation
2004
International conference &Exhibition on Total Engineering, Analysis &Manufacturing Technologies, TEAM TECH 2004, Bangalore, p32
55.
L. Maheshkumar, V. Ravikumar, V.S. Senthil Kumar, S. Natarajan
Evaluation of the range of blank holding force in sheet metal deep drawing process
2004
International conference &Exhibition on Total Engineering, Analysis &Manufacturing Technologies, TEAM TECH 2004, Bangalore, p50
56.
V.S. Senthil Kumar, D. Babu, S. Natarajan, D. Viswanathan
Theoretical modeling and numerical simulation of Superplastic forming of Ti-6Al-4V alloy in a circular die
2004
International conference &Exhibition on Total Engineering, Analysis &Manufacturing Technologies, TEAM TECH Bangalore, p75
57.
V.S. Senthil Kumar, D. Babu, S. Natarajan, D. Viswanathan
Theoretical modeling and numerical simulation of Superplastic forming of AA7475 aluminium alloy in a circular die
2004 ICAMT, Kuala Lumpur Malaysia. p1107-1111
58.
V.S. Senthil Kumar, S. Natarajan, D. Viswanathan, K. Chandrasekaran
Effect of Draw Bead Geometry on Formability In Sheet Metal Drawing
2003
International Conference on Emerging Technology (ICET-2003), Kalinga Institute of Industrial Technology (KIIT), Bhubaneswar, Orissa, INDIA, p73
59.
V.S. Senthil Kumar, S. Natarajan, D. Viswanathan, K. Chandrasekaran
Deformation Analysis of Cup Drawing With Numerical Simulation And Experimental Validation
2003
International Conference on Operation Research: Emerging Paradigm for Information Technology, APORS New Delhi, INDIA, MS-2
60.
S Natarajan, S Venkatasamy, K Chandrasekeran, V.S Senthil Kumar
Effect of Temperature Gradient on Formability of Sheet Metals in Deep Drawing Process
2003 International Manufacturing Conference IMC, Cork Institute of Technology IRELAND, p714-719
National Conferences – 25
Sl No.
Authors Title of the Paper Name of the Conference/Organizer / Year / Vol. /
Page No.
1. G. Elathatharasan, V.S.Senthil Kumar
Micro structure and Tensile Properties of friction stir welded aluminum alloy AA7075
National conference on Engineering Approach for Sustainable Development, SPETMACC – 2011, Anna University of Technology, Trichy, TS-15, pp. 42.
2. C.Sakthivel, V.S.Senthil Kumar
Development of Cell design by using Kings algorithm for Engine valve management
National conference on Recent trends in Civil & Mechanical Engineering, 2011, Anna University of Technology, Trichy, p41
3. A.Dhanasekar, V.S.Senthil Kumar
Generating Supply chain network for Retention and migration customers and their uncertain demand
National conference on Recent trends in Civil & Mechanical Engineering, 2011, Anna University of Technology, Trichy, p131
4. T. Nirmal, V.S. Senthil Kumar
Study of Vendor performance Using Advance Shipping Notification Technology To improve On Time Delivery Efficiency
National Conference on “ETIA 2010”, Vellamal Engineering College, Tamil Nadu. p126-129
Analysis Of First Mode Metal Transfer in Cast Aluminum LM 25 Grade Alloy During Friction Stir Processing
National Workshop on Environmentally Cleaner Welding Processes, Annamalai University, Tamil nadu, p129-139
7. A.S. Bharani Kumar, V. Govindarajulu, V.S. Senthil Kumar
Analysis of reason and customer in generation of obsolete and slow moving inventory for a printing and packaging industry
3rdNational conference on Management Science and Practice (MSP 2008), Operation Research Society of India, IIM Ahamedabad, pp. 247-255.
8. S. Kodhandapani, V. Govindarajulu, V.S. Senthil Kumar
Optimization in scheduling of flexible materials for a printing and packaging industry
3rdNational conference on Management Science and Practice (MSP 2008), Operation Research Society of India, IIM Ahamedabad, pp. 256-262.
9. S. Badrinath, V. Govindarajulu, V.S. Senthil Kumar
Traceability for warehouse inventory in printing and packaging industry
3rdNational conference on Management Science and Practice (MSP 2008), Operation Research Society of India, IIM Ahamedabad, pp. 263-269.
14 | P a g e
10. B.Latha, V.S.Senthil Kumar, K.Palanikumar
Modeling machining parameters for surface roughness using neural networks, National Conference on Mathematics
Computing and modeling, Gandhigram Rural University,India, p169-177
11.
P. Ganesh, V.S. Senthil Kumar, K. Kalaichelvan, S.Natarajan
Review of Advanced SPF/DB Techniques Modeling and Simulation Techniques in Manufacturing Engineering
Modeling and Simulation Techniques in Manufacturing Engineering “MSME2007”, Panimalar Engineering College, p130-132
12.
S. Ramesh, L. Karunamoorthy, K. Palanikumar, B. Vijayakumar, V.S. Senthil Kumar
Analysis and prediction of Machining Responses in Turning of Titanium Alloy (Ti64) using Fuzzy Logic Approach
Modeling and Simulation Techniques in Manufacturing Engineering “MSME2007”, Panimalar Engineering College, p.6-11
13.
L. Mahesh Kumar, P. Omkumar, V.S. Senthil Kumar, S. Natarajan
Effect of blank holder force in deep drawing of cylindrical cups,
National conference on state of the art Technologies in Mechanical Engineering(NCSAME), 2006.
14.
L. Mahesh Kumar, D.S.S.Srinivas Reddy, S. Natarajan, V.S. Senthil Kumar
Evaluation of strain behaviour in deep drawing of conical cup using numerical simulation
UGC&CSIR Sponsored National Conference on Modeling of simulation in manufacturing Engineering (MOSIME2006), ---, M110-M117
15.
S. Ramesh, L. Karunamoorthy, M. Pradeepkumar, V.S. Senthil Kumar
Metallurgical studies and machining of Titanium alloy Ti-6Al-4V
Proceeding of UGC&CSIR Sponsored National Conference on Modeling of simulation in manufacturing Engineering (MOSIME), p75-81
16.
V.S. Senthil Kumar, S. Natarajan, D. Viswanathan, S. Venkataswamy
FEM analysis on Superplastic forming of AA7475 Aluminium alloy in a circular die
National conference on Competitive Manufacturing Technology & Management For Global Marketing CMTM 2005, Crescent Engineering College Chennai, p97-103
17.
V.S. Senthil Kumar, S. Natarajan, D. Viswanathan, M.Balasubramanian
Analysis and simulation of Superplastic forming in a rectangular die
AIMTDR 2004 (All India Manufacturing Technology, Design and Research Conference), VIT, Vellore, p266-271
18.
V.S. Senthil Kumar, S. Natarajan, D. Viswanathan, D. Babu
Theoretical modeling and numerical simulation of Superplastic forming of AA7475 Aluminum alloy in a circular Die
AIMTDR2004 (All India Manufacturing Technology, Design and Research Conference), VIT Vellore, 258-265.
19.
V.S. Senthil Kumar, M. Balasubramanian, S. Natarajan, D. Viswanathan
Numerical analysis and simulation of Superplastic forming in superplastic forming in rectangular die,
National conference on Design, simulation and Modeling of Mechanical systems, 2004, JNTU, Kakinada, p12-16
20.
D. Babu, V.S.Senthil Kumar, S. Natarajan, D. Viswanathan
Modeling and simulation of Superplastic forming of AA7475 Aluminium alloy in circular Die
National conference on CAMMT-2004, IIT Madras, p95-96
21.
M. Balasubramanian, V.S. Senthil Kumar, S. Natarajan, D. Viswanathan
Analysis and Simulation of Superplastic forming in a long rectangular die
National conference on CAMMT-2004, IIT Madras, p.97-98
22.
V.S. Senthil Kumar, S. Natarajan, D. Viswanathan, S. Venkataswamy
Modeling And Analysis of Hydro Mechanical Forming Process
National Conference on COPEN 2003-04, CMTI Bangalore, p210-215
23.
V.S. Senthil Kumar, S. Natarajan, D.Viswanathan, K. Chandrasekaran
Prediction of optimal blank holding force in sheet metal Drawing
Proceedings of the National Conference on AMS- 2003, Jadavpur University, Calcutta, p193-197
24.
V.S. Senthil Kumar, S. Natarajan, D. Viswanathan, K. Chandrasekaran
Numerical simulation of strain behavior of cup drawing
Proceedings of the National Conference on Modeling and Simulation in Manufacturing, Department of Manufacturing Engineering, Annamalai University, Tamil Nadu, C59-C62
25.
R. Sankar, K. Palanikumar, V.S. Senthil Kumar, R.Rangarajan
Modeling and Optimization of various parameters of Turning process for heat treated steel
Advanced Trends in Mechanical Engineering Research and Development, NTU, AnanthpurAndra Pradesh
15 | P a g e
Membership in Professional Bodies:
Sl. No. Name of the Professional Body Class of Membership Member Since
1. INDIAN SOCIETY FOR TECHNICAL EDUCATION (ISTE) LIFE MEMBER 2010
2. OPERATIONAL RESEARCH SOCIETY OF INDIA (ORSI) LIFE MEMBER AUGUST 2010
3. INDIAN SOCIETY OF MECHANICAL ENGINEERS (F ISME) FELLOW LIFE MEMBER DECEMBER 2010
4. INSTITUTION OF ENGINEERS INDIA (F IE) FELLOW LIFE MEMBER 2011
5. INDIAN WELDING SOCIETY (IWS) LIFE MEMBER SEPTEMBER 2010
6. AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) MEMBER MARCH 2012
7. INDIAN INSTITUTE OF PRODUCTION ENGINEERS (IIPE) LIFE MEMBER MARCH 2012
8. MATERIALS RESEARCH SOCIETY OF INDIA (MRSI) LIFE MEMBER MAY 2012
9. INDIAN SOCIETY FOR NON DESTRUCTIVE TESTING(ISNT) LIFE MEMBER MARCH 2011
10. INDIAN INSTITUTE OF MATERIALS MANAGEMNT(IIMM) LIFE MEMBER JUNE 2012
11. CHARTERED ENGINEER (IEI) MEMBER JUNE 2012
12. SOCIETY FOR FAILURE ANALYSIS(SFA) MEMBER NOVEMBER 2012
Details of Recently Attended STTP/FDP/Workshops/Seminars:
Sl. No. Description of
STTP/FDP/Workshop/Seminar Organized by Duration/Date
1. International Workshop on Advanced Functional Nanomaterials
Centre for Nanoscience and Technology, Crystal Growth Centre & Centre for International Affairs, AnnaUniversity, Chennai.
4 Days / 21.02.2011 to 24.02.2011
2. Engine Electronics and Alternate Fuels (AICTE sponsored SDP)
Department of Mechanical Engineering, AnnamalaiUniversity, Chidambaram. Tamilnadu
14 Days / 16.05.2011 to 29.05.2011
3. Workshop on Thermodynamics in Mechanical Engineering (ICT –MHRD Sponsored)
Indian Institute of Technology, Bombay. 11 Days /
14.06.2011 to 24.06.2011
4. Recent Developments in Manufacturing and Management (AICTE sponsored SDP)
Department of Mechanical Engineering, SriSaiRamEngineeringCollege, Chennai – 44
6 Days / 25.07.2011 to 30.07.2011
5. Processing and Applications of Advanced Composite Materials (AICTE sponsored SDP)
Department of Mechanical Engineering, St. Joseph’s College of Engineering, Chennai - 119
13 Days / 07.11.2011 to 19.11.2011
6. National Conference on advances in Naval Materials (ADNAM 2013)
IIT Madras at NIOT Chennai 2 Days/
22.02.2013 to 23.02.2013
7. International Mechanical Engineering Congress & Exposition, IMECE 2013, San Diego, California, USA.
ASME 2013 San Diego, California, USA.
7 Days / 15.11.2013 to 21.11.2013
8.
Faculty Development Training Programme on Unconventional Machining Process at MIT Campus,Anna University.
Centre For Faculty Development, Anna University, Chennai-600025.
8 Days / 04.12.2013 to 11.12.2013
9. 28th Indian Engineering Congress (IEC 2013)
Anna University, Chennai. 3 Days /
20.12.2013 to 22.12.2013
16 | P a g e
Ph. D. PROGRAMME GUIDANCE:
Completed: 14 Thesis Submitted: 1 Ongoing: 9
Sl.No.
Register No. Name Title of the project Status
1. 2006219113 Karthikeyan. L
Some studies on experimental investigation, numerical modeling and analysis of superplastic forming of friction stir processed aluminium alloys
Completed - 2010
2. 2006419753 Latha. B Some studies on modeling and optimization of process parameters in drilling GFRP composites using artificial intelligence
Completed - 2010
3. 2006219128 Govindarajalu. V Some Studies on slow moving inventory And Scrap management In a Printing and Packaging Industry.
Completed - 2012
4. 2006219714 Gopalarama subramaniyan. G
An Integrated Computer Aided Process Planning System for the Manufacturing of a Leaf Spring Assembly
Completed - 2012
5. 2006219711 Ethiraj. N A Study and Investigations on Experimental and Finite Element Analysis of Warm Deep Drawn AISI 304 Stainless Steel Circular Cup Components
Completed- 2012
6. 2006219713 Ganesh .P Studies on Experimental, Numerical and Finite Element Analysis of Superplastic Forming on Friction Stir Welded AA6061-T6 Alloy
Completed- 2013
7. 2812219707 Ezhilarasan. C Experimental Investigation, Modeling and Analysis of Machining Characteristics of Nickel Based Super Alloy Nimonic C-263
Completed- 2013
8. 2714219702 Rameshbabu. S Some studies on Experimental and Numerical Modeling of super plastic forming of friction stir processed AZ31B Alloys
Completed- 2014
9. 2813219111 Elatharasan. G Some studies on friction stir welding of dissimilar aluminum alloy:AA6061 to AA7075
Completed- 2014
10. 2814219713 Shanmuganathan S.P Somestudies on theoretical and experimental investigations on profile forming of aluminum alloy Al 3003(O) through incremental forming
Completed- 2014
11. 2814219701 Mohammed Iqbal. U Some Studies on Experimental and Numerical studies of twist extrusion process on AA6061-T6,AA6082-T6 and AA7075-T6 Aluminium Alloys
Completed- 2014
12. 2815219102 Chezhian Babu. S. Experimental and Numerical Investigations of Incremental Forming on IS:513,IS:277 and AISI304
Completed- 2014
13. 1013219743 Puviyarasan. M Friction Stir Processing of Metal Matrix Composites
Completed -2016
14. 1124219144 Pavithra. E "EXPERIMENTAL AND NUMERICAL INVESTIGATIONS ON THE FATIGUE BEHAVIOUR OF HYDROFORMED INCONEL 625 BELLOWS”
Completed-2017
15. 1214219131 Balaji. K Study and Analysis of Implementation of Supply Chain management in a Automobile Components Manufacturing Industry
Thesis Submitted-2017
16. 1014219735 Suresh. S Experimental & Numerical Analysis on Formability of Polymer Composite Laminates
Ongoing – Comprehension
Completed
17. 1313219161 Dhanasekar Machining of composite materials – A study Ongoing –
19. 1413219222 Sakthivel.C Twist extrusion Process Ongoing –
Comprehension Completed
17 | P a g e
20. 1414119127 Ramesh.N.R.
Experimental Investigations and Finite element analysis(FEA) on Friction Stir Welded Joints of Dissimilar Aluminium Alloys for Deep Ocean Applications.
22. 1414219833 Arul.K Studies on Machining Characteristics of Super-Alloys Ongoing – Course Work Completed
23. 1414219870 Ajay Guru Dev .C Development of a model for the Successful Implementation of Agile Manufacturing in Indian Manufacturing Industries
Ongoing – Comprehension
Completed
24. 15192285 R.Shankar Experimental and Numerical Studies on Submerged Friction Stir Processed of Aluminium and Magnesium Alloys
Ongoing – Course Work
No. of students supervised / Researchers guided in P.G.Level
M.E: Completed: 28 Ongoing: -
Sl. No.
Students name Title of the Project Year
1. Omkumar. P Finite Element Analysis and Experimental Validation of Deep Drawing Process
May 2006
2. Srinivasa Reddy. D. S. S Finite Element Analysis and Experimental Validation of Conical Cup Forming
May 2006
3. Badrinath. S System for Process Traceability from Raw Material to Finished Goods in Printing and Packaging Industry
May 2008
4. Bharani Kumar. A. S Reduction of Obsolete and Slow Moving Inventory Boards for Printing and Packaging Industry
May 2008
5. Kothandapani. S Optimization in scheduling of flexible material for a printing and packaging industry
May 2008
6. Prabhu Karthi Warm Deep Drawing of Stainless Steel Alloys May 2008
7. Prabukanth A Theoretical Modeling and Experimental Analysis of Stainless Steel (AISI 304) for a circular die
May 2008
8. Raja A Optimization of Process Parameters for Friction Stir Processing of LM25 Aluminum Alloy
June 2009
9. Nambi Arooran Feature based design for Automobile Leaf Spring June 2009
10. Vimal Samson Fuzzy Logic Modeling and Experimental Investigation on Drilling of Composites
June 2009
11. Nirmal. T Study of Vendor Performance using Advance Shipping Notification Technology to Improve On Time Delivery Efficiency
Dec 2009
12. Balaji K Study and Analysis of the Slow Moving Industry Items in a Printing and Packaging Industry
Dec 2009
13. Dhanashekar. M Generating Supply Chain Network Model for Retention and Migration Customers and their Uncertain Demand
Dec 2010
14. Abeneth Ramachandran. S Modeling of Logistic Management on Raw Materials for Implementation of Toyota Production Systems in and Automotive Brake Lining Manufacturing Company
Dec 2010
15. Sakthivel. C Development of Cell Design for Engine Valve Manufacturing Dec 2010
16. Radhakrishnan. N Parameter Optimization of Friction Stir Processed Magnesium Alloy May 2012
17. Cholan. M.A.V Optimization of Machining Parameters in Turning of Nimonic C-263 Alloy using Cubic Boron nitride (CBN) Inserts
May 2012
18. Elumalai. P.C D-optimal Modeling of Drilling Metal Matrix Composites May 2013
19. Dinesh. M Experimental investigation Optimization in Turning of Metal Matrix Composites under different lubrication conditions
May 2013
18 | P a g e
20. Deepak Kumar. S Study and Analysis of Warehouse Management in an Automobile Components Manufacturing Industry
May 2014
21. C. Ajay Guru Dev Implementation of Warehouse Management and FIFO Concept Inan Automobile Manufacturing Industry
May 2014
22. Esakki Prasath.A Evaluation of Optimum Level of Spare Parts Inventory at Chennai Ship Maintenance Dock Yard
May 2014
23. G.Rajesh Study and Implementation of Agile Manufacturing in a Automobile Manufacturing Industry
May 2015
24. R.Lokesh Optimization of Process Parameters for Submerged FSW of AA6063 Alloy. May 2015
25. G.Vigneshwaran Optimization of Process parameters in single point incremental forming of Friction Stir Processed AA6063-O Alloy.
May 2015
26. K.Subramaniya
Development of Agility Assessment Model and Analysis of Agility Level in Manufacturing Industry (Phase – I)
Reduction of Lead time in the assembly of Pneumatically operated valves (Phase – II)
May 2016
27. R.Mohana SuriyaPrakash
Developing a Lean Assessment Model to Assess the Human Factors and Ergonomics in the Garment Manufacturing Industry (Phase – I)
An Analysis of process flow in the valve manufacturing industry(Phase–II)
May 2016
28. M.Sangaiah Optimization of Process Parameters and Evaluation of Mechanical and Thermal Properties of Bagasse/Banana Based Natural Fibre Composite
May 2016
19 | P a g e
Development of the Laboratory in the Department: Ordered the Purchase of Friction Stir Processing /Welding Machine costing Rs 22.00 Lakhs under Sponsored Research
Project in the Year 2013 for carrying out Friction Stir Processing/Welding experiments at the Central Workshop, Department of Mechanical Engineering. Anna University, Chennai-25.
Purchased Hydraulic Press of 100 Ton Capacity with Load Cell costing Rs 19.32 Lakhs under Sponsored Research Project in the Year 2013 for carrying out experiments at the Central Workshop, Department of Mechanical Engineering, Anna University, Chennai-25.
Purchased Vertical Milling Machine costing Rs 11.37 Lakhs under Sponsored Research Project in the Year 2011 for carrying out Friction Stir Processing experiments at the Central Workshop, Department of Mechanical Engineering. Anna University, Chennai-25.
Purchased ABAQUS Software Proprietary Certificate HolderPerpetual License costing Rs 1.30 Lakhs under Sponsored Research Project in the Year 2008 for carrying out experimental Analysis at the Central Workshop,Department of Mechanical Engineering. Anna University, Chennai-25.
Purchased Trinocular Inverted Metallurgical Optical Microscope with Image Analysis Systemcosting Rs 1.75 Lakhs under Sponsored Research Project in the Year 2008 for carrying out experimental Analysis at the Central Workshop, Department of Mechanical Engineering. Anna University, Chennai-25.
Metal Forming Laboratory was developed for the B.E Material Science and Engineering students.
