Eurorubba
Profile Rubber Profile RubberRed Soft-C Rubba C Profile
Utilising the advanced shape of the standard 60 shore C the soft version is aimed at corrugated board where its 25 shore body will not crush fluting and for the first time corrugated die-cutters will be able to experience the benefits of the ‘roll together’ the c profile offers.
5.0mm Red 30m RUCSR5MM
6.0mm Red 30m RUCSR6.0MM
6.5mm Red 30m RUCSR6.5MM
7.0mm Red 30m RUCSR7MM
7.5mm Red 30m RUCSR7.5MM
8.0mm Red 30m RUCSR8MM
8.5mm Red 30m RUCSR8.5MM
9.0mm Red 30m RUCSR9MM
9.5mm Red 30m RUCSR9.5MM
10.0mm Red 30m RUCSR10MM
11.0mm Red 30m RUCSR11MM
14.0mm Red 30m RUCSR14MM
The C profile incorporates all the features of T and D profile plus the unique roll together effect achieved by its proven design. This manages to actually help reduce nicks on the die by increasing sheet strength and in turn aid higher press speeds.
5.0mm Yellow 60m RUC5MM
6.0mm Orange 60m RUC6MM
6.5mm Black 60m RUC6.5MM
7.0mm Blue 60m RUC7MM
7.5mm Violet 60m RUC7.5MM
8.0mm Green 60m RUC8MM
8.5mm Red 60m RUC8.5MM
9.0mm Grey 30m RUC9MM
9.5mm Brown 30m RUC9.5MM
10.0mm Cloud 30m RUC10MM
10.5mm Buff 30m RUC10.5MM
11.0mm Pink 30m RUC11MM
Most people would agree that sponge rubber deteriorates quickly on hot/dry high speed presses and soon looses its effectiveness. However Soft-T due to its unique structure does not and is most suitable where extended ejector life is needed for continuous use.
5.0mm Red 30m RUTS5MMR
6.0mm Red 30m RUTS6MMR
6.5mm Red 30m RUTS6.5MM
7.0mm Red 30m RUTS7MMR
7.5mm Red 30m RUTS7.5MMR
8.0mm Red 30m RUTS8MMR
8.5mm Red 30m RUTS8.5MMR
9.0mm Red 30m RUTS9MMR
9.5mm Red 30m RUTS9.5MMR
10.0mm Red 30m RUTS10MMR
10.5mm Red 30m RUTS10.5MMR
11.0mm Red 30m RUTS11MMR
Red Soft-T Rubba
The original ‘Euro Rubba’ with standard 1mm step for correct positioning away from the rule, ideally suited for nicked and common knife areas, especially on dies being used on high speed auto-platens.
5.0mm Yellow 60m RUT5MM
6.0mm Orange 60m RUT6MM
6.5mm Black 60m RUT6.5MM
7.0mm Blue 60m RUT7MM
7.5mm Violet 60m RUT7.5MM
8.0mm Green 60m RUT8MM
8.5mm Red 60m RUT8.5MM
9.0mm Grey 30m RUT9MM
9.5mm Brown 30m RUT9.5MM
10.0mm cloud 30m RUT10MM
10.5mm Buff 30m RUT10.5MM
11.0mm Pink 30m RUT11MM
T Shape Euro Rubba
Narrow D Shape Euro
Used in the same areas as ‘T’ Profile, our ‘D’ profile has the added advantage of its rounded front profile which reduces the chance of the sheet catching enabling better sheet transferral.
5.0mm Yellow 60m RUD5MM
6.0mm Orange 60m RUD6MM
6.5mm Black 60m RUD6.5MM
7.0mm Blue 60m RUD7MM
7.5mm Violet 60m RUD7.5MM
8.0mm Green 60m RUD8MM
8.5mm Red 60m RUD8.5MM
9.0mm Grey 30m RUD9MM
9.5mm Brown 30m RUD9.5MM
10.0mm Cloud 30m RUD10MM
10.5mm Buff 30m RUD10.5MM
11.0mm Pink 30m RUD11MM
G Profile
Specifically designed to reduce the problems encountered when creasing recycled and short fibre boards.
5.0mm Yellow 60m RUG5MM
6.0mm Orange 60m RUG6MM
6.5mm Black 60m RUG6.5MM
7.0mm Blue 60m RUG7MM
7.5mm Violet 60m RUG7.5MM
8.0mm Green 60m RUG8MM
8.5mm Red 60m RUG8.5MM
9.0mm Grey 30m RUG9MM
9.5mm Brown 30m RUG9.5MM
10.0mm Cloud 30m RUG10MM
10.5mm Buff 30m RUG10.5MM
11.0mm Pink 30m RUG11MM
Punchrubba
Punchrubba
A daisy shaped 50 shore hard rubber which saves time by eliminating costly plugging and rubbering of punches which also can eject waste without piercing it as many spring ejectors do. Designed to be pushed into the punch leaving a 1mm protrusion for optimum efficiency.
Punchrubba 1/8” (3.15mm) 100 pieces RUP19
Punchrubba 3/16” (2.5mm) 100 pieces RUP18
Punchrubba 11/64” (4.5mm) 100 pieces RUPO01
Punchrubba 7/32” (5.5mm) 100 pieces RUPO02
Punchrubba 1/4” (6.35mm) 100 pieces RUPO03
Punchrubba 9/32” (7.0mm) 100 pieces RUPO04
Punchrubba 5/16” (8.0mm) 100 pieces RUPO05
Punchrubba 11/32” (8.5mm) 100 pieces RUPO06
Punchrubba 3/8” (9.5mm) 100 pieces RUPO07
Punchrubba 7/16” (11.0mm) 100 pieces RUPO08
Punchrubba 1/2” (12.5mm) 100 pieces RUPO09
Punchrubba 9/16” (14.5mm) 100 pieces RUPO10
Punchrubba 5/8” (16.0mm) 100 pieces RUPO11
Punchrubba 11/16” (17.5mm) 100 pieces RUPO12
Punchrubba 3/4” (19.0mm) 100 pieces RUPO13
Punchrubba 13/16” 100 pieces RUPO14
Punchrubba 7/8” 100 pieces RUPO15
Punchrubba 15/16” 100 pieces RUPO16
Punchrubba 1” 100 pieces RUPO17
Punchrubba 1” 1/16 100 pieces RUPO36
Punchrubba 1” 1/8 100 pieces RUPO37
Punchrubba 1” 3/16 100 pieces RUPO38
Punchrubba 1/4” (6.35mm) 24” RUPO18
Punchrubba 5/16” (8.0mm) 24” RUPO19
Punchrubba 3/8” (9.5mm) 24” RUPO20
Punchrubba 7/16” (11.0mm) 24” RUPO21
Punchrubba 1/2” (12.5mm) 24” RUPO22
Punchrubba 9/16” (14.5mm) 75cm RUPO23
Punchrubba 5/8” (16.0mm) 24” RUPO24
Punchrubba 11/16” (17.5mm) 24” RUPO25
Punchrubba 3/4” (19.0mm) 24” RUPO26
Punchrubba 13/16” 24” RUPO27
Punchrubba 7/8” 24” RUPO28
Punchrubba 15/16” 24” RUPO29
Punchrubba 1” 24” RUPO30
Punchrubba 1” 1/16 24” RUPO31
Punchrubba 1” 1/8 24” RUPO32
Punchrubba 1” 3/16 24” RUPO33
Easi-Crease Rubba Easi-Crease
Incorporating a hollow centre which produces an efficient cushion to greatly reduce crushing of corrugated material. Optimum height is 1mm below creasing rule can either be glued or stapled to the die.
6.0mm Black 20m RUEC6MM
6.5mm Black 20m RUEC6.5MM
7.0mm Black 20m RUEC7MM
7.5mm Black 20m RUEC7.5MM
8.0mm Black 20m RUEC8MM
8.5mm Black 20m RUEC8.5MM
9.0mm Black 20m RUEC9MM
9.5mm Black 20m RUEC9.5MM
9.7mm Black 20m RUEC9.7MM
10.0mm Black 20m RUEC10MM
11.0mm Black 20m RUEC11MM
Flexi-Crease Level
A shortened version of Flexi-Crease already pre shaped for use.
8.0mm Flexi-Crease Level 25m RUFCLEVEL8MM
8.5mm Flexi-Crease Level 25m RUFCLEVEL8.5MM
9.0mm Flexi-Crease Level 25m RUFCLEVEL9MM
9.7mm Flexi-Crease Level 25m RUFCLEVEL9.7MM
Flexi-Crease
Flexi-Crease
Equally at home on flat bed or rotary die-cut operations, this product aids creasing without damage to corrugated boards. Optimum height is 1mm below creasing rule and can either be glued or stapled to the die.
4.5mm Brown 25m RUFC4.5MM
5.0mm Red 25m RUFC5MM
5.7mm Grey 25m RUFC5.7MM
6.0mm Black 25m RUFC6MM
6.5mm Yellow 25m RUFC6.5MM
7.0mm Green 25m RUFC7MM
7.5mm Gold 25m RUFC7.5MM
8.0mm Blue 25m RUFC8MM
8.5mm Purple 25m RUFC8.5MM
9.0mm Orange 25m RUFC9MM
9.5mm White 25m RUFC9.5MM
9.7mm White 25m RUFC9.7MM
10.0mm Pink 25m RUFC10MM
10.7mm Black 25m RUFC10.7MM
11.0mm Beige 25m RUFC11MM
60 Shore
50 Shore
25 Shore
25 Shore
70 Shore 50 Shore60 Shore 60 Shore
60 Shore
50 Shore
Wedge Rubber 10.5Ski Jump
Profile often used for creasing corrugated with rotary dies especially for hard to crease areas.
Ski Jump AG792 10.5mm 40 RUAG792
Also available in 40M Reel Ski Jump Rubber AG792 40m Reel RUSJ
Stepped Wedge
Triangle Wedge Flat Top
Triangle wedge flat top used for creasing corrugated, works well on rotary dies.
Triangle Wedge Flat Top AG940 RUAG940
Triangle Wedge Flat Top AG790 RUAG790 – Same dimension but with sharp top
Triangle Wedge
Used mainly on corrugated board.
Triangle Wedge AG866 10.5mm 40 RUAG866
Triangle Wedge
Used mainly on corrugated board for cutting and creasing if not using creasing matrix.
Triangle Wedge AG1044 10.5mm 40 RUAG1044
The step pushes up to the creasing rules when using creasing matrix. Used mainly on corrugated, very effective on rotary dies.
Stepped Wedge AG1012 C3 10.5mm 40 RUAG1012
Stepped Wedge AG1012 C3 8.0mm 40 RUAG10128MM
Stepped Wedge AG1012 C3 RED 40 RUAG1012RED
Stepped Wedge Rubber AG1012 40m Reel RUSW
As its name suggests it is a slimmer version of the now well known D profile especially designed for tight areas in particular on the inside of glue flaps or narrow gutters.5.0mm Yellow 60m RUND5MM 5.5mm Orange 60m RUND5.5MM6.0mm Orange 60m RUND6MM 6.5mm Black 60m RUND6.5MM7.0mm Blue 60m RUND7MM 7.0mm Black 60m RUMD7MM7.5mm Violet 60m RUND7.5MM8.0mm Green 60m RUND8MM 8.5mm Red 60m RUND8.5MM9.0mm Grey 30m RUND9MM 9.5mm Brown 30m RUND9.5MM9.5mm Black 30m RUMD9.5MM10.0mm Cloud 30m RUND10MM 10.5mm Buff 30m RUND10.5MM11.0mm Pink 30m RUND11MM
Narrow D Euro Rubba
Narrow C Rubba
For the first time Die-Makers have the option to use a C profile on the inside as well as the outside of a glue flap maximising ejection as never before.
5.0mm Yellow 60m RUCN5MM6.0mm Orange 60m RUCN6MM 6.5mm Black 60m RUCN6.5MM7.0mm Blue 60m RUCN7MM 7.5mm Violet 60m RUCN7.5MM8.0mm Green 60m RUCN8MM 8.5mm Red 60m RUCN8.5MM9.0mm Grey 30m RUCN9MM 9.5mm Brown 30m RUCN9.5MM10.0mm Cloud 30m RUCN10MM 10.5mm Buff 30m RUCN10.5MM11.0mm Pink 30m RUCN11MM
50 Shore
60 Shore
Eurorubba
Sprint Slot Rubba
Slot Rubber
With all the elements of Sprintrubba material and its unique concertina shape, Slot Rubber is able to eject waste from small and difficult areas whilst not giving potential rule bursting problems where other slot materials fail. Extruded to either 7 or 10mm in height it also offers precision in width where it is needed most.
7.0mm X 1.0mm 20m RUSLOTS7X1
7.0mm X 2.0mm 20m RUSLOTS7X2
7.0mm X 3.0mm 20m RUSLOTS7X3
7.0mm X 4.0mm 20m RUSLOTS7X4
7.0mm X 5.0mm 20m RUSLOTS7X5
10.0mm X 1.0mm 20m RUSLOTS10X1
10.0mm X 2.0mm 20m RUSLOTS10X2
10.0mm X 3.0mm 20m RUSLOTS10X3
10.0mm X 4.0mm 20m RUSLOTS10X4
10.0mm X 5.0mm 20m RUSLOTS10X5
70 Shore
Your local distributor is:
018
Manufactured under a quality system certified as complying with ISO 9001:2008 by an accredited certification body.
06/11
EurorubbaBrochure 2011/2012
C & T Matrix Ltd Sanders Road, Wellingborough, Northamptonshire. NN8 4NL England
t. +44 (0) 1933 273444 f. +44 (0) 1933 229277 e. [email protected] w. www.channel-matrix.com freephone 0800 1382182
Sprintrubba Sprintrubba Narrow
Sprint Rubber
Sprint Rubba has high resistance to heat. So will not dry out on press or in storage. Unique U.V. resistance! Important as this is a major factor in profile ejector degradation and excellent durability, no noticeable performance reduction after 1.5 million impressions. Self lubrication to reduce board friction. New Flat Top C profile for reduced board bruising with concave base for total stability. Shorter make ready times possible. Fewer nicks needed also reduces dusting, fragmentation and angel hair.
Sprintrubba 6.50mm White 60 RUSP6.5MM
Sprintrubba 6.75mm White 60m RUSP6.75MM
Sprintrubba 7.0mm White 60m RUSP7MM
Sprintrubba 7.25mm White 60m RUSP7.25MM
Sprintrubba 7.5mm White 60m RUSP7.5MM
Sprintrubba 8.0mm White 60m RUSP8MM
Sprintrubba 9.0mm White 30m RUSP9.0MM
Sprintrubba 9.1mm White 30m RUSP9.1MM
Sprintrubba 9.5mm White 30m RUSP9.5MM
Sprintrubba 10.0mm White 30m RUSP10.0MM
Sprintrubba 12.5mm White 30m RUSP12.5MM
Sprint Rubba has high resistance to heat. So will not dry out on press or in storage. Unique U.V. resistance! Important as this is a major factor in profile ejector degradation and excellent durability, no noticeable performance reduction after 1.5 million impressions. Self lubrication to reduce board friction. New Flat Top C profile for reduced board bruising with concave base for total stability. Shorter make ready times possible. Fewer nicks needed also reduces dusting, fragmentation and angel hair.
Sprintrubba 6.50mm x 3mm White 60m Narrow RUSPN6.53
Sprintrubba 6.50mm x 5mm 60m Narrow RUSPN6.5MM
Sprintrubba 6.75mm x 5mm 60m Narrow RUSPN6.75MM
Sprintrubba 7.0mm x 5mm 60m Narrow RUSPN7MM
Sprintrubba 7.0mm x 3mm White Narrow RUSPN7MM3
Sprintrubba 7.25mm x 5mm White Narrow RUSPN7.25MM
Sprintrubba 7.25mm x 3mm White Narrow RUSPN7.25MM3
Sprintrubba 7.50mm x 5mm 60m Narrow RUSPN7.5MM
Sprintrubba 7.5mm x 3mm White Narrow RUSPN7.5MM3
Sprintrubba 8.0mm x 5mm 60m Narrow RUSPN8MM
Sprintrubba 8.0mm x 3mm White Narrow RUSPN8MM3
Sprintrubba 9.50mm White 30m Narrow RUSPN9.5MM
Sprintrubba 9.50mm White 30m Narrow RUSPN9.5MM3
70 Shore 70 Shore