Date post: | 06-Apr-2016 |
Category: |
Documents |
Upload: | rouge-interiors |
View: | 229 times |
Download: | 0 times |
CONTENTS
1. WHAT ARE EXPANSION JOINTS?
2. SEISMIC JOINTS.
3. WHAT DO YOU NEED TO KNOW TO CHOOSE THE RIGHT JOINT?
4. TABLE FOR JOINT SELECTION.
PRODUCT INDEX5. FLUSH-MOUNTED JOINTS – WITH ELASTIC STRIPS
Novojunta Pro® Basic
Novojunta Pro® Aluminium
Novojunta Pro® Flush-mounted Perimeter
Novojunta Pro® L50
Novojunta Pro® L55
Novojunta Pro® L65
18
19
20
21
22
23
Novojunta Pro® L85
Novojunta Pro® XL105
24
25
10
12
14
15
17
Novojunta Pro® XL130
Novojunta Pro® WP80 Watertight
26
27
6. FLUSH-MOUNTED JOINTS – ALL METAL
Novojunta Pro® AL30 RS 30
Novojunta Pro® Mobile
Novojunta Pro® Metal 50
Novojunta Pro® Metal 60
Novojunta Pro® Metal 80
Novojunta Pro® Metal SIS110
Novojunta Pro® Metal 125
Novojunta Pro® Metal SIS
Novojunta Pro® Sismo SU
31
32
33
34
35
36
37
38
29
Novojunta Pro® Basic SP
Novojunta Pro® Anti-slip
Novojunta Pro® Overlaid Perimeter
Novojunta Pro® SP
Novojunta Pro® Sismo PE
Novojunta Pro® Metal SP90
45
46
47
48
49
50
7. JOINTS OF SPECIAL WIDTHS
8. OVERLAID JOINTS
Novojunta Pro® AL30
Novojunta Pro® AL30 Perimeter
Novojunta Pro® Decor
42
43
44
39
41
9. VERTICAL JOINTS
Novojunta Pro® PA
Novojunta Pro® PASP
59
60
Novojunta Pro® AL30
Novojunta Pro® AL30 RS
Novojunta Pro® Decor
Novojunta Pro® Basic VT
Novojunta Pro® Basic VT SP
Novojunta Pro® Anti-slip
Novojunta Pro® Sismo PA
52
53
54
55
56
57
58
10. WATERTIGHT MEMBRANE
11. FIRESTOP JOINTSFirestop cord
Firestop mastic
61
63
64
65
51
Novotapajuntas NDP
Novotapajuntas NDA
Novotapajuntas NDAS
Novotapajuntas NCJE
Novotapajuntas GTA
Novotapajuntas TX
Novotapajuntas GTX
Novosepara 10
72
73
74
74
75
76
76
77
12. RETRACTION JOINTS IN CONCRETE FLOORS AND MORTAR SCREEDS
Novojunta® Hormigonado
Novojunta Pro® Hormigonado
68
69
13. JOINT COVERS
67
71
86
87
Novojunta® Metallic
Novojunta® Metallic Perimeter
Novojunta Decor®
Novojunta Decor® XL
Novojunta Metallic® Flecha
Novojunta® JSI
Novojunta Decor® Flecha
Novojunta® 1 Pvc
Novojunta® 3 Pvc
80
81
82
83
84
84
85
15. PROFILES AND ACCESSORIES
90
14. EXPANSION AND FRACTIONING JOINTS FOR PAVING
Novocanto® Stainless Steel
79
89
Novocanto® Aluminium
Novocanto® Pvc
Novoyeso
Monocapa
Novopared-Novosuelo
Novolistel® Basic Stainless Steel
Novolistel® 3 Aluminium
Novoescuadra Aluminium
Novoescuadra Plus
Novosepara 1
Novosepara 6
Novosepara 9
90
91
91
92
92
93
93
94
94
95
95
96
Novopletina Aluminium
Novoescocia® 4 Aluminium
Novoescocia® 4 Pvc
Novorodapie® Rehabit
Novorodapie® L
Novorodapie® Flex
Novorodapie® SemiFlex
96
97
97
100
100
101
101
17. STEP FINISHES
16. SKIRTING
Novopeldaño® 5
Novopeldaño® Safety
Novopeldaño® Lúmina
104
104
105
18. MATS19. OTHER EXCLUSIVE SOLUTIONS
107111
103
99
In construction everything moves. All buildings and their structural elements are subject to pressures that cause movements, deformations and geometrical changes.
1. WHAT ARE EXPANSION JOINTS?
With the aim of controlling and preventing these internal tensions, medium-sized and large buildings are built in blocks, so that each of these blocks operates independently and does not knock against the block next to it.Between these blocks, spaces are reserved for the expansion joints. The placement and opening of these joints are determined by the estimator or structural engineers, who will also determine the load capacity that the joint must bear.
An expansion joint is an opening that pierces the entire construction: floors, walls, façades and roofs.The structural expansion joints absorb and accompany the buildings’ movements to control and prevent cracking. They also enable isolation of the joins between different structural elements, including walls, machinery foundations, drains and so on, avoiding the transmission of tensions between them.Doing away with expansion joints, using an unsuitable joint system or distributing joints incorrectly can encourage the appearance of all kinds of pathology in the building’s structure and finishes which, once works are terminated, will be difficult to solve and mean high maintenance costs.
In contrast, correctly resolving the most critical joins and flashing on a site is the mark of a good project.Expansion joint profiles are applied in airports, shopping centres, hospitals, schools, parking facilities, industrial buildings and factories. They consist of metal profiles (aluminium, steel, stainless steel, etc.), generally joined by rubber inserts, and covering the openings to allow movement in the blocks without causing damage to the cement or cladding.
• Variations in temperature of the environment.
• Expansions generated from the contraction of the different construction materials.
• Settlement and movement of the terrain
• Seismic movement
• The weight of the buildings themselves and their use.
• Wind pressure.
• Loads and traffic.
THESE PRESSURES STEM FROM THE FOLLOWING CAUSES:
10
The Novojunta Pro® series by Emac® enables expansion joints to act without interfering with structural movements. This is a complete range of profile systems conceived to absorb the different movement types and avoid the appearance of cracks and other pathologies, thereby extending the useful life of structures.They can be installed with all types of material: porcelain, concrete, terrazo, granite, marble and other stone.
Furthermore, they can be complemented with watertight bands to avoid leaks, dampness and dirt, as well as using firestop systems that stop the passage of fire and smoke.All the trials we carry out, we do so in independent technological institutes belonging to the redIT of the Valencian Community.
According to their movement capacity, expansion joints are divided into”thermal” and”seismic”.Thermal joints: are those that admit the expansion of the construction elements themselves. Habitually these joints do not surpass 50 mm (1.97”) joint widths and expansions of +/- 10 mm (0.39”)Seismic joints: as a general rule, seismic joints are classed as those that have a multi-directional expansion capacity of at least 25% of the width of the joint in each horizontal direction. For example, in the case of a joint 50 mm (1.97”) wide, in order to class it as a joint with seismic capacity, it must have an expansion of at least +/- 12.5 mm (0.49”).Furthermore, these joints must have enough resistance not to deform with the traffic borne andalso span the distance between blocks with enough rigidity. It is advisable to install joints that are all metal.
NOVOJUNTA PRO®
EXPANSION JOINTS CAN BE CLASSIFIED INTO THE FOLLOWING CATEGORIES
ACCORDING TO INSTALLATION:
• Overlaid, on the floor.
• Flush, built-in flush with the floor.
ACCORDING TO THE LOAD THEY
SUPPORT:
• Light
• Medium
• Heavy
• Very heavy
ACCORDING TO PURPOSE:
• Floor-floor
• Wall-wall
• Floor-wall
11
2. SEISMIC JOINTSSeismic danger or the destructive potential of earthquakes is determined by four conditions according to Bertero (1992):
• Earthquake severity, its magnitude. The movement induced in the terrain which will affect the constructions.
• The seismic source and its distance.
• The size, distribution and economic development of the towns affected.
• Preparation against the earthquake, understood as the population’s degree of response and the prevention measures that are taken against the chance of an earthquake.
CONDITIONS THAT DETERMINE THE DESTRUCTIVE POTENTIAL OF EARTHQUAKES
GLOBAL SEISMIC HAZARD MAPproduced by the Global Seismic Hazard Assessment Program (GSHAP)Por D. Giardini. G. Grünthal. K. Shedlock. and P.Zhang 1999
u
12
Against the phenomenon of earthquakes, construction plays a fundamental role to guarantee the safety and stability of buildings. This is especially important in those which are necessary for the population’s survival, such as hospitals, fire stations, etc. Countries such as Japan, the USA or Chile have developed highly demanding standards so that buildings overcome seismic activity without failure or collapse.
At a European level, we find references to seismic aspects in the Eurocode 8: Design of structures for earthquake resistance, which indicates requirements such as uniformity and symmetry for constructions, to improve their response to seismic activity. So a cubic design of buildings is recommended, without irregular geometries, and uniformity can be achieved by subdividing the building using seismic joints.
We can classify constructions according to their importance into three types:
The last group includes hospitals, communications buildings (radio, television, telecommunications centres), buildings for organisation and coordination, buildings for rescue personnel and equipment (fire fighters, police, armed forces, machinery and ambulance parks), basic utilities (water tanks, gas, fuels, pump centres, electrical power plants), airports, public performance buildings, large shopping centres and special constructions such as nuclear power plants, dams and places where dangerous substances are stored.
Each construction must be separated from its adjacent buildings by a minimum distance to mitigate the shock effects during seismic movements. These required minimum separation values are established. The joints between the bodies of buildings must have at least a width corresponding to the sum of the maximum lateral displacements of the two bodies. The joints must be situated at a maximum distance of 40 m (43 yd).
• Constructions of moderate importance: those buildings whose destruction by an earthquake would have little probability of causing victims.
• Constructions of normal importance: buildings whose destruction could cause victims, but which is not a building containing essential services in the event of a catastrophe.
• Constructions of special importance: buildings whose destruction could cause a large number of victims or interrupt an essential service.
CLASSIFICATION OF CONSTRUCTIONS
13
3. WHAT DO YOU NEED TO KNOW TO CHOOSE THE RIGHT JOINT?
EVALUATION AND TECHNICAL STUDY WITH NO OBLIGATION
1. What width does the joint opening have?
2. What is the calculated movement that the structure will have?
• Horizontal movement • Vertical movement
3. What type of flooring will be installed?
4. What type of fixture does it need?
• Flush • Overlaid (previously installed cladding)
5. What thickness does the cladding (h) have? (for flush-mounted joints)
6. Required load capacity. What mode of transport will pass over it?.
7. Will the joint be in the exterior or the interior of the building?.
8. Does it need to be watertight (for example underground car parks)?
9. Any possible presence of chemical agents?
FUNDAMENTAL QUESTIONS THAT SHOULD BE ASKED
OUR TECHNICAL TEAM IS FULLY AT YOUR SERVICE TO RESOLVE YOUR DOUBTS OR PROVIDE THE TECHNICAL INFORMATION YOU NEED: TECHNICAL FILES, TRIAL CERTIFICATES, CAD DRAWINGS, BC3 FILES, INSTALLATION INSTRUCTIONS AND SO ON.IF YOU PREFER, WE WILL PROVIDE YOU WITH THE PLANS AND MAKE THE CALCULATION AND DISTRIBUTION OF THE JOINTS NEEDED FOR YOUR PROJECT.
!14
4. TABLE FOR JOINT SELECTION
15
JOINT TYPE INSTALLATION LOAD-USE REFERENCEMAXIMUM JOINT
WIDTHTYPE PAGE
Floor/Floor
Flush-mounted
Light/Medium
Novojunta Pro® AL30 RS 30 mm (1.18”) All Metal 30
Novojunta Pro® Basic 40 mm (1.57”) With elastic strip 18
Novojunta Pro® XL130 130 mm (5.12”) With elastic strip 26
Medium Novojunta Pro® Aluminium 55 mm (2.16”) With elastic strip 19
Medium/Heavy
Novojunta Pro® L50 50 mm (1.97”) With elastic strip 21
Novojunta Pro® L55 55 mm (2.16”) With elastic strip 22
Novojunta Pro® L65 65 mm (2.56”) With elastic strip 23
Novojunta Pro® L85 85 mm (3.35”) With elastic strip 24
Novojunta Pro® XL105 105 mm (4.13”) With elastic strip 25
HeavyNovojunta Pro® Metal SIS110 110 mm (4.33”) All Metal. Seismic 35
Novojunta Pro® WP80 80 mm (3.15”) Watertight 27
Very heavy
Novojunta Pro® Mobile 50 mm (1.97”) All Metal 31
Novojunta Pro® Metal 50 50 mm (1.97”) All Metal 32
Novojunta Pro® Metal 60 60 mm (2.36”) All Metal 33
Novojunta Pro® Metal 80 80 mm (3.15”) All Metal 34
Novojunta Pro® Sismo SU 100 mm (3.94”) All Metal. Seismic 38
Novojunta Pro® Metal 125 125 mm (4.92”) All Metal. Seismic 36
Novojunta Pro® Metal SIS 200 mm (7.87”) All Metal. Seismic 37
Overlaid
Light Novojunta Pro® Decor 30 mm (1.18”) Metal+rubber 44
Light/MediumNovojunta Pro® AL30 30 mm (1.18”) All Metal 42
Novojunta Pro® Basic SP 40 mm (1.57”) With elastic strip 45
Medium Novojunta Pro® Anti-slip 44 mm (1.73”) With elastic strip 46
Medium/HeavyNovojunta Pro® SP 50 mm (1.97”) With elastic strip 48
Novojunta Pro® SP90 90 mm (3.54”) With elastic strip. Seismic 50
Floor/Wall
Flush-mounted - Novojunta Pro® Flush-mounted perimeter 42 mm (1.65”) With elastic strip 20
Overlaid -
Novojunta Pro® AL30 Perimeter 32 mm (1.26”) All Metal 43
Novojunta Pro® Overlaid perimeter 44 mm (1.73”) With elastic strip 47
Novojunta Pro® Sismo PE 74 mm (2.91”) All Metal. Seismic 49
Wall/Wall
Flush-mounted. -
Novojunta Pro® AL30 RS 30 mm (1.18”) All Metal 53
Novojunta Pro® Basic VT 40 mm (1.57”) With elastic strip 55
Novojunta Pro® PA 330 mm (12.99”) With elastic strip. Seismic 59
Overlaid -
Novojunta Pro® AL30 30 mm (1.18”) All Metal 52
Novojunta Pro® Decor 30 mm (1.18”) Metal+rubber 54
Novojunta Pro® Basic VT SP 40 mm (1.57”) With elastic strip 56
Novojunta Pro® Anti-slip 44 mm (1.73”) With elastic strip 57
Novojunta Pro® Sismo PA 100 mm (3.94”) All Metal. Seismic 58
Novojunta Pro® PASP 360 mm (14.17”) With elastic strip. Seismic 60
LOAD CAPACITY
• Aluminium L-shaped profiles, perforated on their base to receive the fastenings.
• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).
• Profiles supplied in standard lengths of 3 m (118.1”).• The rubber parts are supplied in continuous rolls.• The complete kit includes all fastenings.• Optional: firestop cord, and watertight membrane (only
some references. Ask Us).
MATERIALS AND TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasional heavy load traffic.
Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
RUBBER COLOURS
NOVOJUNTA PRO® BASIC
www.emac.es
FLOOR/FLOORLIGHT/MEDIUM LOADFLUSH-MOUNTED
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
Beige 1013Grey 7035Black 9005
• Expansion joints for flooring (concrete, terrazo, stone, etc.).• For joint widths up to 45 mm (1.77”).• Admission of movement up to 14 mm (0.55”).• Replaceable rubber.• Safe and easy attachment thanks to the perforated profiles and
fast anchor bolts.• 5 profile heights available: 12.5, 22, 40, 50 and 80 mm
(0.49”, 0.87”, 1.57”, 1.97” and 3.15”).• 3 measurements of rubber (20, 30 and 40 mm / 0.79”, 1.18”
and 1.57”), with a smooth or grooved surface.• All the profiles and rubber parts in the series can be combined,
ordered separately and not as an assembly.• They can be installed between pavings of different heights/
thicknesses, combining aluminium attachment flanges with different heights (h) to each side of the joint.
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
Smooth rubberEXPANSION
Grooved rubber
JOINTS UP TO 25 mm WIDENJPB2012*
20 mm (0.79”) 24 mm (0.94”)
104 mm (4.09”) 12.5 mm (0.49”)
smooth or grooved8 mm (+4/-4)
0.31” (+0.15/-0.15)10 mm (+5/-5)
0.39” (+0.19/-0.19)
NJPB2022* 104 mm (4.09”) 22 mm (0.87”)NJPB2040* 120 mm (4.72”) 40 mm (1.57”)NJPB2050* 160 mm (6.3”) 50 mm (1.97”)NJPB2080* 130 mm (5.12”) 80 mm (3.15”)
JOINTS UP TO 35 mm WIDENJPB3012*
30 mm (1.18”) 34 mm (1.34”)
114 mm (4.49”) 12.5 mm (0.49”)
smooth or grooved10 mm (+5/-5)
0.39” (+0.19/-0.19)12 mm (+6/-6)
0.47” (+0.23/-0.23)
NJPB3022* 114 mm (4.49”) 22 mm (0.87”)NJPB3040* 130 mm (5.12”) 40 mm (1.57”)NJPB3050* 170 mm (6.69”) 50 mm (1.97”)NJPB3080* 140 mm (5.51”) 80 mm (3.15”)
JOINTS UP TO 45 mm WIDENJPB4012*
40 mm (1.57”) 44 mm (1.73”)
124 mm (4.88”) 12.5 mm (0.49”)
smooth or grooved12 mm (+6/-6)
0.47” (+0.23/-0.23)14 mm (+7/-7)
0.55” (+0.27/-0.27)
NJPB4022* 124 mm (4.88”) 22 mm (0.87”)NJPB4040* 140 mm (5.51”) 40 mm (1.57”)NJPB4050* 180 mm (7.09”) 50 mm (1.97”)NJPB4080* 150 mm (5.90”) 80 mm (3.15”)
*Indicate rubber colour and type (smooth or grooved).
18
OCCASIONAL USE
SMOOTH
GROOVED
• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).• For joint widths up to 55 mm. (2.17”)• Admission of movement up to 20 mm. (0.79”)• Replaceable rubber.• Safe and easy attachment thanks to the perforated profiles.
COLOCACIÓN NOVOJUNTA PRO® ALUMINIUMFLOOR-FLOORMEDIUM LOADFLUSH-MOUNTED
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
a
b
h
c
Novojunta Pro® Aluminium h:20 mm.
Novojunta Pro® Aluminium h:35 mm y h:50 mm
MATERIALS AND TECHNICAL DETAILS• Natural aluminium profiles, perforated on their base to
receive the fastenings.
• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity,
resistant to damp, and extreme temperatures (-30ºC up to
+120ºC).
• It is supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.
• Profiles supplied in standard lengths of 2.5 m (98.4”).• Shims are available to facilitate alignment between profiles
in the installation.
• They can be installed between pavings of different heights/ thicknesses, combining aluminium attachment flanges with
different heights (h).
• Optional: firestop cord, and watertight membrane (only some references. Ask Us).
LOAD CAPACITY• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 50 kN, and occasionally up to 300 kN.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
RUBBER COLOURS
Black 9005
* By adding a central reinforcement piece, it bears medium loads.
Model registered as Community design No 869892-5
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
Horizontal
JOINTS UP TO 30 mm WIDENJPAL2034
30 mm (1.18”) 34 mm (1.34”)87 mm (3.42”) 20 mm (0.79”)
grooved10 mm (+5/-5)
0.39” (+0.19/-0.19)NJPAL3534* 130 mm (5.12”) 35 mm (1.38”)NJPAL5034* 130 mm (5.12”) 50 mm (1.97”)
JOINTS UP TO 40 mm WIDENJPAL2044
40 mm (1.57”) 44 mm (1.73”)
97 mm (3.82”) 20 mm (0.79”)
grooved14 mm (+7/-7)
0.55” (+0.27/-0.27)NJPAL3544* 140 mm (5.51”) 35 mm (1.38”)
NJPAL5044* 140 mm (5.51”) 50 mm (1.97”)
JOINTS UP TO 55 mm WIDENJPAL3559*
55 mm (2.17”) 59 mm (2.32”)155 mm (6.10”) 35 mm (1.38”)
grooved20 mm (+10/-10)
0.79” (+0.39/-0.39) NJPAL5059* 155 mm (6.10”) 50 mm (1.97”)
19
a
b
h
c
OCCASIONAL USE
• Expansion joints for perimeters and joins between cons-truction elements (ceramics, concrete, terrazo, stone, etc.). It is the perfect complement to the Novojunta Pro@ Aluminium.
• For joint widths up to 42 mm (1.65”).• Admission of movement up to 14 mm (0.55”).• Replaceable rubber.• Safe and easy attachment thanks to the perforated
profiles.
• Natural aluminium profiles, perforated on their base to receive the fastenings.
• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).
• It is supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.
• Profiles supplied in standard lengths of 2.5 m (98.4”).• Optional: firestop cord, and watertight membrane
(only some references. Ask Us).
MATERIALS AND TECHNICAL DETAILS
RUBBER COLOURS
NOVOJUNTA PRO® FLUSH-MOUNTED PERIMETER
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
Black 9005
Model registered as Community design No 869888-1
Novojunta Pro® flush-mounted perimeter
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
Horizontal
JOINTS UP TO 34 mm WIDE
NJPPS2032 32 mm (1.26”) 32 mm (1.26”)
20 mm (0.79”)grooved
10 mm (+5/-5)0.39” (+0.19/-0.19)
NJPPS3532 35 mm (1.38”)NJPPS5032 50 mm (1.97”)
JOINTS UP TO 50 mm WIDE
NJPPS204242 mm (1.65”) 42 mm (1.65”)
20 mm (0.79”)grooved
14 mm (+7/-7)0.55” (+0.27/-0.27)
NJPPS3542 35 mm (1.38”)NJPPS5042 50 mm (1.97”)
20
h
b
a
FLOOR-WALLFLUSH-MOUNTED
• Expansion joints for flooring (concrete, terrazo, stone, etc.).
• For joint widths up to 50 mm (1.97”).• Admission of movement up to 20 mm (0.79”). Replaceable rubber. Safe and easy attachment thanks to the perforated
profiles and fast anchor bolts.
COLOCACIÓN NOVOJUNTA PRO® L50
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND TECHNICAL DETAILS
• Aluminium L-shaped profiles, perforated on their base to receive the fastenings.
• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).
• Profiles supplied in standard lengths of 3 m (118.1”).
• The rubber parts are supplied in continuous rolls.• The complete kit includes all fastenings.• Optional: firestop cord, and watertight membrane
(only some references. Ask Us).
LOAD CAPACITY
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasionally up to 300 kN.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
RUBBER COLOURS
Grey 7035
FLOOR-FLOORMEDIUM-HEAVY LOADFLUSH-MOUNTED
Black 9005
Novojunta Pro® L50
OCCASIONAL USE
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
Smooth rubberEXPANSION
Grooved rubber
NJPL50AL35NA50 mm (1.97”) 55 mm (2.17”) 155 mm (6.10”)
35 mm (1.38”)smooth or grooved
16 mm (+8/-8)0.63” (+0.31/-0.31)
20 mm (+10/-10)0.79” (+0.39/-0.39)
NJPL50AL50NA 50 mm (1.97”)NJPL50AL80NA 80 mm (3.15”)
a
b
h
c
21
LOAD CAPACITY
• Reinforced aluminium L-shaped profiles, perforated on their base to receive fastenings, assembled using a system of two-piece joints that act as support for te rubber and allow vertical movement.
• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).
• It is supplied pre-assembled.• Profiles supplied in standard lengths of 3 m
(118.1”).• The rubber parts are supplied in continuous rolls.• The complete kit includes all fastenings.• Optional: firestop cord, and watertight membrane
(only some references. Ask Us).
MATERIALS AND TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasionally up to 300 kN.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
RUBBER COLOURS
www.emac.es
FLOOR-FLOORMEDIUM-HEAVY LOADFLUSH-MOUNTED
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).
• For joint widths up to 55 mm. (2.16”)• Admission of movement up to 26 mm. (1.02”)• Replaceable rubber.• Safe and easy attachment thanks to the perforated
profiles and fast anchor bolts.
NOVOJUNTA PRO® L55
Grey 7035Black 9005
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
horizontalEXPANSION
vertical
NJPL55AL18NA
55 mm (2.16”) 80 mm (3.15”) 195 mm (7.68”)
18 mm (0.71”)
grooved26 mm (+13/-13)1.02” (+0.5/-0.5)
12 mm (+6/-6)0.47” (+0.23/-0.23)
NJPL55AL35NA 35 mm (1.38”)
NJPL55AL50NA 50 mm (1.97”)
NJPL55AL80NA 80 mm (3.15”)
Novojunta Pro® L55
22
OCCASIONAL USE
• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).
• For joint widths up to 65 mm (2.59”).• Admission of movement up to 28 mm (1.1”).• Replaceable rubber.• Safe and easy attachment thanks to the perforated
profiles and fast anchor bolts.
COLOCACIÓN NOVOJUNTA PRO® L65
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND TECHNICAL DETAILS
• Reinforced aluminium L-shaped profiles, perforated on their base to receive fastenings, assembled with two solid pieces and a central reinforcement piece that supports the rubber.
• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).
• It is supplied pre-assembled.• Profiles supplied in standard lengths of 3 m
(118.1”).• The rubber parts are supplied in continuous rolls.• The complete kit includes all fastenings.• Optional: firestop cord, and watertight membrane
(only some references. Ask Us).
LOAD CAPACITY
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 50 kN, and occasionally up to 300 kN.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
RUBBER COLOURS
Grey 7035
FLOOR-FLOORMEDIUM-HEAVY LOADFLUSH-MOUNTED
Black 9005
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
horizontalEXPANSION
vertical
NJPL65AL35NA65 mm (2.59”) 83 mm (3.27”) 205 mm (8.07”)
35 mm (1.38”)grooved
28 mm (+18/-10)1.1” (+0.7/-0.4)
20 mm (+10/-10)0.79” (+0.39/-0.39)NJPL65AL50NA 50 mm (1.97”)
Novojunta Pro® L65
a
b
h
c
23
OCCASIONAL USE
LOAD CAPACITY
• Reinforced aluminium L-shaped profiles, perforated on their
base to receive fastenings, assembled using a system of
two-piece aluminium joints that allow vertical movement of
the joint. The side pieces support a large reinforcement
piece that improves the joint’s load capacity and houses
the double synthetic rubber pieces of which it consists.
• Central insert of synthetic rubber with an excellent capacity
to absorb multi-directional movements. Great elasticity,
resistant to damp, and extreme temperatures (-30ºC up to
+120ºC).
• It is supplied pre-assembled.
• Profiles supplied in standard lengths of 3 m (118.1”).
• The rubber parts are supplied in continuous rolls.
• The complete kit includes all fastenings.
• Optional: firestop cord, and watertight membrane (only
some references. Ask Us).
MATERIALS AND TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasionally up to 300 kN.
Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
RUBBER COLOURS
www.emac.es
FLOOR-FLOORMEDIUM-HEAVY LOADFLUSH-MOUNTED
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).
• For joint widths up to 85 mm (3.35”).• Admission of movement up to 22 mm (0.86”).• Replaceable rubber 2x40 mm (2x1.57”) wide.• Safe and easy attachment thanks to the perforated
profiles and fast anchor bolts.
NOVOJUNTA PRO® L85
Grey 7035Black 9005
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
HorizontalEXPANSION
Vertical
NJPL85AL35NA
85 mm (3.35”) 111 mm (4.37”) 226 mm (8.9”)
35 mm (1.38”)
grooved22 mm (+11/-11)
0.86” (+0.43/-0.43)14 mm (+7/-7)
0.55” (+0.27/-0.27)NJPL85AL50NA 50 mm (1.97”)
NJPL85AL80NA 80 mm (3.15”)
Novojunta Pro® L85
a
b
h
c
24
OCCASIONAL USE
• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).
• For joint widths up to 105 mm (4.13”)• Admission of movement up to 26 mm (1.02”).• Replaceable rubber 2x50 mm (2x1.97”) wide.• Safe and easy attachment thanks to the perforated
profiles and fast anchor bolts.
COLOCACIÓN NOVOJUNTA PRO® XL105
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] Emac AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND TECHNICAL DETAILS• Reinforced aluminium L-shaped profiles, perforated on their
base to receive fastenings, assembled using a system of
two-piece aluminium joints that allow vertical movement of
the joint. The side pieces support a large reinforcement
piece that improves the joint’s load capacity and houses
the double synthetic rubber pieces of which it consists.
• Double insert of synthetic rubber with an excellent capacity
to absorb multi-directional movements. Great elasticity,
resistant to damp, and extreme temperatures (-30ºC up to
+120ºC).
• It is supplied pre-assembled.
• Profiles supplied in standard lengths of 3 m (118.1”).
• The rubber parts are supplied in continuous rolls.
• The complete kit includes all fastenings.
• Optional: firestop cord, and watertight membrane (only
some references. Ask Us).
LOAD CAPACITY
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasionally up to 300 kN.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
RUBBER COLOURS
Grey 7035
FLOOR-FLOORMEDIUM-HEAVY LOADFLUSH-MOUNTED
Black 9005
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
horizontalEXPANSION
vertical
NJPXL105AL35
105 mm (4.13”) 130 mm (5.12”) 236 mm (9.29”)
35 mm (1.38”)
grooved26 mm (+13/-13)
1.02” (+0.51/-0.51)14 mm (+7/-7)
0.55” (+0.27/-0.27)NJPXL105AL50 50 mm (1.97”)
NJPXL105AL80 80 mm (3.15”)
Novojunta Pro® XL105
a
b
h
c
25
OCCASIONAL USE
LOAD CAPACITY
• Aluminium L-shaped profiles, perforated on their base to receive the fastenings and central reinforcement.
• Triple insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).
• It is supplied pre-assembled.• Profiles supplied in standard lengths of 3 m (118.1”).• The rubber parts are supplied in continuous rolls.• The complete kit includes all fastenings.• Optional: firestop cord, and watertight membrane (only
some references. Ask Us).
MATERIALS AND TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
RUBBER COLOURS
www.emac.es
FLOOR-FLOORLIGHT-MEDIUM LOADFLUSH-MOUNTED
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).
• For joint widths up to 130 mm (5.11”).• Admission of movement up to 40 mm (1.57”).• Replaceable rubber 3x45 mm (3x1.77”) wide.• Safe and easy attachment thanks to the perforated
profiles and fast anchor bolts.
NOVOJUNTA PRO® XL130
Grey 7035Black 9005
REFERENCEJOINT WIDTH
(a)VISIBLE WIDTH
(b)TOTAL WIDTH
(c)PROFILE HEIGHT
(h)RUBBER TYPE
EXPANSIONhorizontal
EXPANSIONvertical
NJPXL130AL35130 mm (5.12”) 155 mm (6.10”) 274 mm (10.79”)
35 mm (1.38”)grooved
40 mm (+20/-20)1.57” (+0.78/-0.78)
14 mm (+7/-7)0.55” (+0.27/-0.27)NJPXL130AL50 50 mm (1.97”)
Novojunta Pro® XL130
a
b
h
c
26
a
b
h
c
• Watertight joint.• Expansion joints for flooring (ceramic, concrete,
terrazo, stone, etc.).• For joint widths up to 80 mm (3.15”).• Admission of movement up to 60 mm (2.36”).• Capacity to support heavy loads.• Ideal for hygienic zones.
NOVOJUNTA PRO® WP80
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND TECHNICAL DETAILS
• Structure manufactured of solid steel.• Anti-vibration rubber.• Elastic insert of EPDM rubber with a second
additional WOLFIN IB waterproofing membrane.• Special interchangeable thermoplastic membranes
compatible with bituminous sheets or PVC membranes.
• Covered with stainless steel profiles AISI 304 of 2-mm thickness.
• Resistant to atmospheric agents and changes in temperature from -35ºC to +120ºC.
• It is supplied pre-assembled.• Installed using metal No. 7 plugs spaced every 30
cm (11.8”). • The complete kit includes all fastenings.• We recommend attaching in a staggered fashion.• Optional: firestop cord.
LOAD CAPACITY
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN.Important note: this joint requires technical assessment for installation. The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
RUBBER COLOURS
Black 9005
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h)
EXPANSIONhorizontal
EXPANSIONvertical
NJPWP80AL54N
80 mm (3.15”) 135 mm (5.31”) 275 mm (10.82”)
54 mm (2.12”)60 mm (+30/-30)
2.36” (+0.18/-0.18)30 mm (+15/-15)
1.18” (+0.59/-0.59)NJPWP80AL64N 64 mm (2.52”)
NJPWP80AL94N 94 mm (3.7”)
Novojunta Pro® WP80
ESTANCA
27
FLOOR-FLOORHEAVY LOADFLUSH-MOUNTED
LOAD CAPACITY
• Joint formed of aluminium profiles.• System with the capacity to absorb multi-
directional movements• Profiles supplied in standard lengths of 2.5 m
(98.4”).• It is supplied pre-assembled, mechanised,
identified with a barcode, and with protective film on the visible face.
• Optional: firestop cord, and watertight membrane (only some references. Ask Us).
MATERIALS AND TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
www.emac.es
FLOOR-FLOORLIGHT-MEDIUM LOADFLUSH-MOUNTED
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints for flooring (ceramic, concrete,
stone, etc.).• For joint widths up to 30 mm (1.18”).• Admission of movement up to 9.4 mm.
NOVOJUNTA PRO® AL30 RS
REFERENCEJOINT WIDTH
(a)VISIBLE WIDTH
(b)TOTAL WIDTH
(c)PROFILE HEIGHT
(h)EXPANSIONhorizontal
EXPANSIONvertical
NJPAL30RSPL 30 mm (1.18”) 32.5 mm (1.279”) 84 mm (3.3”) 12.5 mm (0.49”)9.4 mm (+4.7/-4.7)0.37” (+0.18/-0.18)
5 mm (+2.5/-2.5)0.19” (+0.1/+0.1)
Novojunta Pro® AL30 RS
a
b
h
c
30
FINISHES AVAILABLE
Anodised matt silver
• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints for flooring (ceramic, concrete,
terrazo, stone, etc.).• Grooved, anti-slip surface• For joint widths up to 50 mm (1.97”).• Admission of movement up to 10 mm (0.39”).
COLOCACIÓN NOVOJUNTA PRO® MOBILE
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND TECHNICAL DETAILS
• Aluminium profiles, perforated on their base to receive the fastenings.
• System with the capacity to absorb multi-directional movements
• Profiles supplied in standard lengths of 2.5 m (98.4”).
• It is supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.
• Optional: firestop cord, and watertight membrane (only some references. Ask Us).
LOAD CAPACITY• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN.• Forklifts (DIN 1055) with pneumatic tyres up to 70 kN.• Platform lifts and pallet trucks with solid wheels up to 6,5 kg/mm.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
FINISHES AVAILABLE
FLOOR-FLOORVERY HEAVY LOADFLUSH-MOUNTED
Natural Anodised matt silver
Model registered as Community design No 869889-2
REFERENCE FINISH JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h)
EXPANSIONhorizontal
NJPMAL2071 Natural
50 mm (1.97”) 71 mm (2.79”) 154 mm (6.06”)
20 mm (0.79”)
10 mm (+5/-5)0.39” (+0.19/-0.19)
NJPMAL2071PL Anodised matt silver
NJPMAL3571 Natural35 mm (1.38”)
NJPMAL3571PL Anodised matt silver
NJPMAL5071 Natural50 mm (1.97”)
NJPMAL5071PL Anodised matt silver
NJPMAL7071 Natural70 mm (2.75”)
NJPMAL7071PL Anodised matt silver
Novojunta Pro® Mobile
31
LOAD CAPACITY • Aluminium profiles, perforated on their base to receive the fastenings.
• System with the capacity to absorb multi-directional movements
• Profiles supplied in standard lengths of 3 m (98.4”).
• It is supplied pre-assembled with strips that must be removed once installed, and with protective film on the visible face.
• Installation using metal expansion bolts spaced every 30 cm (11.8”).
• The complete kit includes all fastenings.• We recommend attaching in a staggered fashion.• Optional: firestop cord, and watertight membrane
(only some references. Ask Us).
MATERIALS AND TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN.
• Forklifts (DIN 1055) with pneumatic tyres up to 70 kN.
• Platform lifts and pallet trucks with solid wheels up to 6,5 kg/mm.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
FINISHES AVAILABLE
www.emac.es
FLOOR-FLOORVERY HEAVY LOADFLUSH-MOUNTED
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints for flooring (ceramic,
concrete, terrazo, stone, etc.).• It bears the weight of large loads (trucks,
forklifts and pallet trucks).• Grooved, anti-slip surface• For joint widths up to 50 mm (1.97”).• Admission of movement up to 20 mm (0.79”).• Ideal for warehouses, airports, shopping
centres, parking facilities, etc.
NOVOJUNTA PRO® METAL 50
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h)
EXPANSIONhorizontal
EXPANSION vertical
NJPM50AL18NA
50 mm (1.97”) 75 mm (2.95”) 190 mm (7.48”)
18 mm (0.71”)
20 mm (+10/-10)0.79” (+0.39/-0.39)
10 mm (+5/-5)0.39” (+0.19/-0.19)
NJPM50AL35NA 35 mm (1.38”)
NJPM50AL50NA 50 mm (1.97”)
NJPM50AL80NA 80 mm (3.15”)
Novojunta Pro® Metal 50
32
Natural
• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints for flooring (ceramic, concrete,
terrazo, stone, etc.).• It bears the weight of large loads (trucks, forklifts
and pallet trucks).• Grooved, anti-slip surface• Visible surface without holes to avoid the
accumulation of dirt and noise.• For joint widths up to 60 mm (2.36”).• Admission of movement up to 30 mm (1.18”).
COLOCACIÓN NOVOJUNTA PRO® METAL 60
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND TECHNICAL DETAILS
• Aluminium profiles, perforated on their base to receive the fastenings.
• System with the capacity to absorb multi-directional movements
• Profiles supplied in standard lengths of 3 m (98.4”).• It is supplied pre-assembled with strips that must be
removed once installed, and with protective film on the visible face.
• Installation using metal expansion bolts spaced every 30 cm (11.8”).
• The complete kit includes all fastenings.• We recommend attaching in a staggered fashion.• Optional: firestop cord, and watertight membrane
(only some references. Ask Us).
LOAD CAPACITY
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN.
• Forklifts (DIN 1055) with pneumatic tyres up to 70 kN.
• Platform lifts and pallet trucks with solid wheels up to 6,5 kg/mm.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
FINISHES AVAILABLE
FLOOR-FLOORVERY HEAVY LOADFLUSH-MOUNTED
REFERENCEJOINT WIDTH
(a)VISIBLE WIDTH
(b)TOTAL WIDTH
(c)PROFILE HEIGHT
(h)EXPANSIONhorizontal
EXPANSIONvertical
NJPM60AL18NA
60 mm (2.36”) 80 mm (3.15”) 195 mm (7.68”)
18 mm (0.71”)
30 mm (+15/-15)1.18”(+0.59/-0.59)
12 mm (+6/-6)0.47”(+0.23/-0.23)
NJPM60AL35NA 35 mm (1.38”)
NJPM60AL50N3 50 mm (1.97”)
NJPM60AL80NA 80 mm (3.15”)
Novojunta Pro® Metal 60
33
Natural
LOAD CAPACITY • Aluminium profiles, perforated on their base to receive the fastenings.
• System with the capacity to absorb multi-directional movements
• Profiles supplied in standard lengths of 3 m (98.4”).• It is supplied pre-assembled with strips that must be
removed once installed, and with protective film on the visible face.
• Installation using metal expansion bolts spaced every 30 cm (11.8”).
• The complete kit includes all fastenings.• We recommend attaching in a staggered fashion.• Optional: firestop cord, and watertight membrane
(only some references. Ask Us).
MATERIALS AND TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN.
• Forklifts (DIN 1055) with pneumatic tyres up to 70 kN.
• Platform lifts and pallet trucks with solid wheels up to 6,5 kg/mm.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
FINISHES AVAILABLE
www.emac.es
FLOOR-FLOORVERY HEAVY LOADFLUSH-MOUNTED
NOVOJUNTA PRO® METAL80
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints for flooring (ceramic, concrete,
terrazo, stone, etc.).• It bears the weight of large loads (trucks, forklifts
and pallet trucks).• Grooved, anti-slip surface• Visible surface without holes to avoid the
accumulation of dirt and noise.• For joint widths up to 80 mm (3.15”).• Admission of movement up to 40 mm (1.57”).
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h)
EXPANSIONhorizontal
EXPANSIONvertical
NJPM80AL50N380 mm (3.15”) 110 mm (4.33”) 250 mm (9.84”)
50 mm (1.97”) 440 mm (+20/-20)1.57” (+0.78/-0.78)
10 mm (+5/-5)0.39” (+0.19/-0.19)NJPM80AL80NA 80 mm (3.15”)
Novojunta Pro® Metal 80
a
b
h
c
34
Natural
• Great expansion. Ideal for areas of seismic risk.• Admission of movement up to 40 mm (1.57”).• For joint widths up to 110 mm (4.33”).• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints for flooring (ceramic, concrete,
terrazo, stone, etc.).• It bears the weight of large loads (trucks).• Grooved, anti-slip surface.
COLOCACIÓN NOVOJUNTA PRO® METAL SIS110
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND TECHNICAL DETAILS
• Aluminium profiles, perforated on their base to receive the fastenings.
• System with the capacity to absorb large multi-directional movements.
• Profiles supplied in standard lengths of 3 m (118.1”).
• It is supplied pre-assembled with strips that must be removed once installed, and with protective film on the visible face.
• Attachment to the floor structure or floor slab using metal expansion bolts.
• The complete kit includes all fastenings.• We recommend attaching in a staggered fashion.• Optional: firestop cord, and watertight membrane
(only some references. Ask Us).
LOAD CAPACITY• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 200 kN.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
FINISHES AVAILABLE
FLOOR-FLOORHEAVY LOADFLUSH-MOUNTED
Novojunta Pro® Metal SIS110
SEISM
IC
REFERENCEJOINT WIDTH
(a)VISIBLE WIDTH
(b)TOTAL WIDTH
(c)PROFILE HEIGHT
(h)EXPANSIONhorizontal
EXPANSIONvertical
NJPM110S18NA
110 mm (4.33”) 130 mm (5.12”) 250 mm (9.84”)
18 mm (0.71”)
40 mm (+20/-20)1.57” (+0.78/-0.78)
20 mm (+10/-10)0.79” (+0.39/-0.39)
NJPM110S35NA 35 mm (1.38”)
NJPM110S50NA 50 mm (1.97”)
NJPM110S80NA 80 mm (3.15”)
35
Natural
LOAD CAPACITY • Aluminium profiles, perforated on their base to receive the fastenings.
• System with the capacity to absorb large multi-directional movements
• Profiles supplied in standard lengths of 3 m (118.1”).
• It is supplied pre-assembled with strips that must be removed once installed, and with protective film on the visible face.
• Attachment to the floor structure or floor slab using metal expansion bolts.
• A full metre includes all fastenings.• We recommend attaching in a staggered fashion.• Optional: firestop cord, and watertight membrane
(only some references. Ask Us).
MATERIALS AND TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN.
• Forklifts (DIN 1055) with pneumatic tyres up to 70 kN.
• Platform lifts and pallet trucks with solid wheels up to 7 kg/mm.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
FINISHES AVAILABLE
www.emac.es
FLOOR-FLOORVERY HEAVY LOADFLUSH-MOUNTED
NOVOJUNTA PRO® METAL 125
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Great expansion. Ideal for areas of seismic risk.• Admission of movement up to 60 mm (2.36”).• For joint widths up to 125 mm (4.92”).• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints for flooring (ceramic, concrete,
terrazo, stone, etc.).• It bears the weight of large loads (trucks, forklifts
and pallet trucks).• Grooved, anti-slip surface
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h)
EXPANSIONhorizontal
EXPANSION vertical
NJPM125AL35N
125 mm (4.92”) 140 mm (5.51”) 260 mm (10.23”)
35 mm (1.38”)60 mm (+30/-30)
2.36” (+1.18/-1.18)20 mm (+10/-10)
0.79” (+0.39/-0.39)NJPM125AL50N 50 mm (1.97”)
NJPM125AL80N 80 mm (3.15”)
Novojunta Pro® Metal 125
SEISM
IC
36
Natural
• Great expansion. Ideal for areas of seismic risk.• Admission of movement up to 60 mm (2.36”).• For joint widths up to 200 mm (7.87”).• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints for flooring (ceramic, concrete,
terrazo, stone, etc.).• It bears the weight of large loads (trucks, forklifts and
pallet trucks).• Grooved, anti-slip surface• Visible surface without holes to avoid the accumulation
of dirt and noise.
COLOCACIÓN
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND TECHNICAL DETAILS
• Joint formed of slippery aluminium profiles. Movement
is ensured by a double hinge sliding along retractable
guides thanks to which the transit surface remains flat and
stepless.
• System with the capacity to absorb large multi-directional
movements
• Profiles supplied in standard lengths of 3 m (118.1”).
• It is supplied pre-assembled with protective film on the
visible face.
• Installed using metal plugs spaced every 30 cm (11.8”).
• A full metre includes all fastenings.
• Attachment of the system 6 cm (2.36”) from the border of
the joint has been studied to preserve the adjacent paving.
• Optional: firestop cord, and watertight membrane (only
some references. Ask Us).
LOAD CAPACITY
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 600 kN.
• Forklifts (DIN 1055) with pneumatic tyres up to 70 kN.
• Platform lifts and pallet trucks with solid wheels up to 30 kN with contact pressure of 1 N/mm2.
• Vulkollan wheel of 30 kN with contact pressure of 6 N/mm2.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
FINISHES AVAILABLE
FLOOR-FLOORVERY HEAVY LOADFLUSH-MOUNTED
NOVOJUNTA PRO® METAL SIS
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h)
EXPANSION Horizontal
EXPANSIONVertical
NJPMSIS50NA 50 mm (1.97”) 255 mm (10.03”)
20 mm (0.79”)60 mm (+30/-30)
2.36” (+1.18/-1.18)50 mm (+25/-25)
1.97” (+0.98/-0.98)
NJPMSIS100NA 100 mm (3.94”) 305 mm (12”)
NJPMSIS150NA 150 mm (5.9”) 360 mm (14.17”)
NJPMSIS200NA 200 mm (7.87”) 410 mm (16.14”)
Novojunta Pro® Metal SIS
SEISM
IC
a
b
37
Natural
LOAD CAPACITY
MATERIALS AND
TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 600 kN.• Forklifts (DIN 1055) with pneumatic tyres up to 70 kN.• Platform lifts and pallet trucks with solid wheels up to 7 kg/mm.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
FINISHES AVAILABLE
www.emac.es
FLOOR-FLOORVERY HEAVY LOADFLUSH-MOUNTED
NOVOJUNTA PRO® SISMO SU
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Great expansion. Ideal for areas of seismic risk.• Admission of movement up to 130 mm (5.11”).• For joint widths up to 100 mm (3.94”).• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints for flooring (ceramic, concrete,
terrazo, stone, etc.).• Grooved, anti-slip surface.
Anodised matt silver
Patent pending
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h)
EXPANSIONhorizontal
EXPANSION vertical
NJPSUALPL25 100 mm (3.94”) 367.7 mm (14.48”) 21.6 mm (0.85”)130 mm (+65/-65)
5.11” (+2.55/-2.55)12 mm (+6/-6)
0.47” (+0.23/-0.23)
Novojunta Pro® SISMO SU
SEISM
IC
See our explanatory video by capturing this QR code on your smartphone or going to our corporate channel on YouTube (http://www.youtube.com/user/emaccomplementos).
38
• Joint formed of slippery aluminium profiles in anodised matt silver.
• System with the capacity to absorb large multi-directional movements
• Profiles supplied in standard lengths of 2.5 m (98.4”).• It is supplied pre-assembled, mechanised, identified with
a barcode, and with protective film on the visible face.• Optional: firestop cord, and watertight membrane
(only some references. Ask Us).
COLOCACIÓN
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
JOINTS OF SPECIAL WIDTHS
WE OFFER SPECIFIC SOLUTIONS FOR JOINTS OF LARGE DIMENSIONS‚ UP
TO 400 MM (15.75”) WIDE.
REqUEST MORE INFORMATION FROM OUR TECHNICAL DEPARTMENT.!
40
• Joint formed of slippery aluminium profiles.• System with the capacity to absorb multi-directional
movements• Profiles supplied in standard lengths of 2.5 m
(98.4”).• Supplied pre-assembled, identified with a barcode,
and with protective film on the visible face.• Optional: firestop cord.
MATERIALS AND
TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
FINISHES AVAILABLE
www.emac.es
NOVOJUNTA PRO® AL30
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints for flooring (ceramic, concrete,
terrazo, stone, etc.).• Grooved, anti-slip surface.• For joint widths up to 30 mm (1.18”).• Admission of movement up to 9.4 mm (0.37”).
Anodised matt silver
Model registered as Community design No 1815762-0001
Novojunta Pro® AL30
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h)
EXPANSIONhorizontal
EXPANSIONvertical
NJPAL30PL25 30 mm (1.18”) 82 mm (3.29”) 3.8 mm (0.15”)9.4 mm (+4.7/-4.7)0.36” (+0.18/-0.18)
5 mm (+2.5/-2.5)0.19” (+0.09/-0.09)
FLOOR-FLOORLIGHT-MEDIUM LOADOVERLAID
a
b
h
h
42
• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints for perimeters and joins between
construction elements (ceramics, concrete, terrazo, stone, etc.).
• Grooved, anti-slip surface.• For joint widths up to 32 mm (1.26”).• Admission of movement up to 9.4 mm (0.37”).
COLOCACIÓN
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND
TECHNICAL DETAILS
• Joint formed of slippery aluminium profiles.• System with the capacity to absorb multi-directional
movements.• Profiles supplied in standard lengths of 2.5 m
(98.4”).• Supplied pre-assembled, mechanised, identified with
a barcode, and with protective film on the visible face.• Optional: firestop cord.
FINISHES AVAILABLE
NOVOJUNTA PRO® AL30 PERIMETER
Anodised matt silver
Novojunta Pro® AL30 Perimeter
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h)
EXPANSIONhorizontal
EXPANSIONvertical
NJPPAL30PL 32 mm (1.26”) 56 mm (2.2”) 3.8 mm (0.15”)9.4 mm (+4.7/-4.7)0.36” (+0.18/-0.18)
5 mm (+2.5/-2.5)0.19” (+0.09/-0.09)
FLOOR-WALL‚ WALL-WALL WALL-ROOFOVERLAID
43
LOAD CAPACITY
• Anodised aluminium profile.• Interior body of EPDM rubber with an excellent
capacity for absorbing tensions and deformations.• Profiles supplied in standard lengths of 2.5 m
(98.4”).• Supplied pre-assembled, identified with a barcode,
and with protective film on the visible face.• Optional: firestop cord.
MATERIALS AND
TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
FINISHES AVAILABLE
www.emac.es
FLOOR-FLOORLIGHT LOADOVERLAID
NOVOJUNTA PRO® DECOR
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Expansion joint and joint cover for floors, walls and roofs.
• For joint widths up to 30 mm (1.18”).• Admission of movement up to 29.1 mm (1.14”).• Grooved, anti-slip surface
Anodised matt silver
Model registered as Community design No 869890-3
Novojunta Pro® Decor
REFERENCE FINISH JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h)
EXPANSIONHorizontal
NJPDAL2070 Natural12.6 mm (0.5”)
70 mm (2.75”) 20 mm (0.79”)
3.4 mm (+1.7/-1.7)0.13” (+0.06/-0.06)NJPDAL2070PL Anodised matt silver
NJPDAL2070 Natural30 mm (0.79”)
29.1 mm (+19.1/-8)1.14” (+0.74/-0.39)NJPDAL2070PL Anodised matt silver
a
b
h
44
Natural
• Expansion joints for flooring (ceramics, concrete, terrazo, stone, etc.).
• For joint widths up to 45 mm (1.77”).• Admission of movement up to 14 mm
(0.55”).• Replaceable rubber.• Grooved, anti-slip surface
COLOCACIÓN
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND
TECHNICAL DETAILS• Light aluminium L-shaped profiles.• Central insert of synthetic rubber with an excellent
capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).
• 3 measurements of rubber (20, 30 and 40 mm / 0.79”, 1.18” and 1.57”), with a smooth or grooved surface.
• Profiles supplied in standard lengths of 3 m (118.1”).
• The rubber parts are supplied in continuous rolls.• The complete kit includes all fastenings.• Optional: firestop cord.
LOAD CAPACITY
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
RUBBER COLOURS
FLOOR-FLOORLIGHT-MEDIUM LOADOVERLAID
Novojunta Pro® Basic SP
NOVOJUNTA PRO® BASIC SP
Beige 1013Grey 7035Black 9005
REFERENCE JOINT WIDTH (a) VISIBLE WIDTH (b) RUBBER TYPE EXPANSION Smooth rubber EXPANSION Grooved rubber
NJPBS20* 20 mm (0.79”) 124 mm (4.88”) smooth or grooved8 mm (+4/-4)
0.31” (+0.15/-0.15)10 mm (+5/-5)
0.39” (+0.19/-0.19)
NJPBS30* 30 mm (1.18”) 134 mm (5.28”) smooth or grooved10 mm (+5/-5)
0.39” (+0.19/-0.19)12 mm (+6/-6)
0.47” (+0.23/-0.23)
NJPBS40* 40 mm (1.57”) 144 mm (5.67”) smooth or grooved12 mm (+6/-6)
0.47” (+0.23/-0.23)14 mm (+7/-7)
0.55” (+0.27/-0.27)
*Indicate rubber colour and type (smooth or grooved).
45
SMOOTH
GROOVED
LOAD CAPACITY
• Light aluminium L-shaped profiles.• Central insert of synthetic rubber with an excellent
capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).
• Profiles supplied in standard lengths of 2.5 m (98.4”).
• Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.
• Optional: firestop cord.
MATERIALS AND
TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
FINISHES AVAILABLE
www.emac.es
FLOOR-FLOORMEDIUM LOADOVERLAID
NOVOJUNTA PRO® ANTI-SLIP
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Expansion joints for flooring (ceramics, concrete, terrazo, stone, etc.).
• For joint widths up to 44 mm (1.73”).• Admission of movement up to 14 mm (0.55”).• Replaceable rubber.• Grooved, anti-slip surface.
Anodised matt silver
Model registered as Community design No 869891-4
Novojunta Pro® Anti-Slip
Black 9005
REFERENCE FINISH JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
horizontal
NJPADAL2087 Natural34 mm (1.34”) 87 mm (3.42”)
20 mm (0.79”) grooved
10 mm (+5/-5)0.39” (+0.19/-0.19) NJPADAL2087PL Anodised matt silver
NJPADAL2097 Natural44 mm (1.73”) 97 mm (3.82”)
14 mm (+7/-7)0.55” (+0.27/-0.27) NJPADAL2097PL Anodised matt silver
RUBBERS PROFILES:
46
Natural
• Expansion joints for perimeters and joins between construction elements (ceramics, concrete, terrazo, stone, etc.). It is the perfect complement to the Novojunta Pro@ Aluminium.
• For joint widths up to 44 mm (1.73”).• Admission of movement up to 14 mm (0.55”).• Replaceable rubber.
COLOCACIÓN
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND
TECHNICAL DETAILS• Aluminium profiles.• Central insert of synthetic rubber with an excellent capacity
to absorb multi-directional movements. Great elasticity,
resistant to damp, and extreme temperatures (-30ºC up to
+120ºC).
• Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.
• Profiles supplied in standard lengths of 2.5 m (98.4”).• Optional: firestop cord.
RUBBER COLOURS
FLOOR-WALLOVERLAID
Novojunta Pro® Overlaid perimeter
NOVOJUNTA PRO® OVERLAID PERIMETER
Black 9005
Model registered as Community design No 869888-1
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
horizontal
NJPPS2058 34 mm (1.34”) 58 mm (2.28”) 20 mm (0.79”) grooved10 mm (+5/-5)
0.39” (+0.19/-0.19)
NJPPS2068 44 mm (1.73”) 68 mm (2.68”) 20 mm (0.79”) grooved14 mm (+7/-7)
0.55” (+0.27/-0.27)
47
LOAD CAPACITY
• Light aluminium L-shaped profiles.• Central insert of synthetic rubber with an excellent
capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).
• Profiles supplied in standard lengths of 3 m (118.1”).
• The rubber parts are grooved and supplied in continuous rolls.
• The complete kit includes all fastenings. • Optional: firestop cord.
MATERIALS AND
TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 50 kN.• Occasionally suitable for forklifts (DIN 1055) or light pallet trucks traffic.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
RUBBER COLOURS
www.emac.es
FLOOR-FLOORMEDIUM-HEAVY LOADOVERLAID
NOVOJUNTA PRO® SP
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Expansion joints for flooring (concrete, terrazo, stone, etc.).
• For joint widths up to 50 mm (1.97”).• Admission of movement up to 20 mm (0.79”).• Replaceable rubber.• Grooved, anti-slip surface
Novojunta Pro® SP
Grey 7035Black 9005
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
Horizontal
NJPSP35 35 mm (1.38”) 145 mm (5.7”)
13 mm (0.51”) grooved
14 mm (+7/-7)0.55” (+0.27/-0.27)
NJPSP40 40 mm (1.57”) 150 mm (5.90”)16 mm (+8/-8)
0.63” (+0.31/-0.31)
NJPSP50 50 mm (1.97”) 160 mm (6.3”)20 mm (+10/-10)
0.79” (+0.39/-0.39)
48
OCCASIONAL USE
• Great expansion. Ideal for areas of seismic risk.• Admission of movement up to 65 mm (2.55”).• For joint widths up to 74 mm (2.91”).• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints for perimeters and joins between
construction elements (ceramics, concrete, terrazo, stone, etc.).
COLOCACIÓN
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND
TECHNICAL DETAILS
• Joint formed of slippery aluminium profiles in anodised matt silver.
• System with the capacity to absorb large multi-directional movements
• Profiles supplied in standard lengths of 2.5 m (98.4”).
• Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.
• Optional: firestop cord.
FINISHES AVAILABLE
FLOOR-WALLOVERLAID
Novojunta Pro® Sismo PE
NOVOJUNTA PRO® SISMO PE
Anodised matt silver
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
EXPANSIONhorizontal
EXPANSIONvertical
NJPPEALPL25 74 mm (2.91”) 193.5 mm (7.62”)65 mm (+32.5/-32.5)2.55” (+1.27/-1.27)
10 mm (+5/-5)0.39” (+0.19/-0.19)
SEISM
IC
49
LOAD CAPACITY
• Joint formed of slippery aluminium profiles.• System with the capacity to absorb large multi-
directional movements.• Great resistance to wear from friction.• Profiles supplied in standard lengths of 3 m
(118.1”).• Supplied pre-assembled with protective film on the
visible face.• A full metre includes all fastenings.• Optional: firestop cord.
MATERIALS AND
TECHNICAL DETAILS
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 90 kN.• Forklifts (DIN 1055) with pneumatic tyres up to 35 kN.Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
RUBBER COLOURS
www.emac.es
FLOOR-FLOORMEDIUM-HEAVY LOADOVERLAID
NOVOJUNTA PRO® METAL SP90
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Great expansion. Ideal for areas of seismic risk.• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints for flooring (ceramic, concrete,
terrazo, stone, etc.).• Grooved, anti-slip surface.• For joint widths up to 90 mm (3.54”).• Admission of movement up to 30 mm (1.18”).
Novojunta Pro® Metal SP90
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h)
EXPANSIONHorizontal
NJPMSP90NA 90 mm (3.54”) 230 mm (9.05”)15 mm (0.59”)
0.59” (+0.29/-0.29)30 mm (+15/-15)
1.18” (+0.59/-0.59)
SEISM
IC
50
Natural
OCCASIONAL USE
• Joint formed of slippery aluminium profiles.• System with the capacity to absorb multi-directional
movements.• Profiles supplied in standard lengths of 2.5 m
(98.4”).• Supplied pre-assembled, identified with a barcode,
and with protective film on the visible face.• Optional: firestop cord.
MATERIALS AND
TECHNICAL DETAILS
FINISHES AVAILABLE
www.emac.es
NOVOJUNTA PRO® AL30
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints in walls.• For joint widths up to 30 mm (1.18”).• Admission of movement up to 9.4 mm (0.37”).
Anodised matt silver
Novojunta Pro® AL30
Model registered as Community design No 1815762-0001
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h)
EXPANSIONhorizontal
EXPANSIONvertical
NJPAL30PL25 30 mm (1.18”) 82 mm (3.23”) 3.8 mm (0.15”)9.4 mm (+4.7/-4.7)0.37” (+0.18/-0.18)
5 mm (+2.5/-2.5)0.2” (+0.1/-0.1)
WALL/WALLOVERLAID
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
a
b
h
h
52
• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Expansion joints in floors and walls.• For joint widths up to 30 mm (1.18”).• Admission of movement up to 9.4 mm (0.37”).
COLOCACIÓN
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND
TECHNICAL DETAILS
• Joint formed of aluminium profiles.• System with the capacity to absorb multi-directional
movements.• Profiles supplied in standard lengths of 2.5 m
(98.4”).• Supplied pre-assembled, identified with a barcode,
and with protective film on the visible face.• Optional: firestop cord.
FINISHES AVAILABLE
Anodised matt silver
WALL/WALLFLUSH-MOUNTED NOVOJUNTA PRO® AL30 RS
Novojunta Pro® AL30 RS
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h)
EXPANSIONhorizontal
EXPANSIONvertical
NJPAL30RSPL 30 mm (1.18”) 32.5 mm (1.28”) 84 mm (3.3”) 12.5 mm (0.49”)9.4 mm (+4.7/-4.7)0.37” (+0.18/-0.18)
5 mm (+2.5/-2.5)0.2” (+0.1/-0.1)
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
a
b
h
c
53
• Anodised aluminium profile.• Interior body of EPDM rubber with an excellent capacity for
absorbing tensions and deformations.
• Profiles supplied in standard lengths of 2.5 m (98.4”).• Supplied pre-assembled, identified with a barcode, and with
protective film on the visible face.
• Optional: firestop cord.
MATERIALS AND
TECHNICAL DETAILS
FINISHES AVAILABLE
www.emac.es
WALL/WALLOVERLAID
NOVOJUNTA PRO® DECOR
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Expansion joint and joint cover for floors, walls and roofs.
• For joint widths up to 30 mm (1.18”).• Admission of movement up to 29.1 mm
(1.14”).
Anodised matt silver
Novojunta Pro® DECOR
Model registered as Community design No 869890-3
REFERENCE FINISH JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h)
EXPANSIONHorizontal
NJPDAL2070 Natural12.6 mm (0.5”)
87 mm (3.42”) 20 mm (0.79”)
3.4 mm (+1.7/-1.7)0.13” (+0.06/-0.06)NJPDAL2070PL Anodised matt silver
NJPDAL2070 Natural30 mm (1.18”)
29.1 mm (+19.1/-8)1.14” (+0.74/-0.39)NJPDAL2070PL Anodised matt silver
Important note: The operation and expansion capacity are
guaranteed only if installation is performed following the
instructions given in the technical file.
a
b
h
54
Natural
• Expansion joints in walls.• For joint widths up to 45 mm (1.77”).• Admission of movement up to 14 mm (0.55”).• Replaceable rubber.• Safe and easy attachment thanks to the
perforated profiles and fast anchor bolts.
COLOCACIÓN
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND
TECHNICAL DETAILS
• Light aluminium L-shaped profiles, perforated on their base to receive the fastenings.
• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).
• 3 measurements of rubber (20, 30 and 40 mm / 0.79”, 1.18” and 1.57”), with a smooth or grooved surface.
• Profiles supplied in standard lengths of 3 m (118.1”).
• The rubber parts are supplied in continuous rolls.
• The complete kit includes all fastenings.
• Optional: firestop cord.
RUBBER COLOURS
WALL-WALLFLUSH-MOUNTED NOVOJUNTA PRO® BASIC VT
Novojunta Pro® BASIC VT
Beige 1013Grey 7035Black 9005
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
TOTAL WIDTH(c)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
Smooth rubberEXPANSION
Grooved rubber
NJPB2012* 20 mm (0.79”) 24 mm (0.94”) 104 mm (4.09”) 12.5 mm (0.49”) smooth or grooved8 mm (+4/-4)
0.31” (+0.15/-0.15)10 mm (+5/-5)
0.39” (+0.19/-0.19)
NJPB3012* 30 mm (1.18”) 34 mm (1.34”) 114 mm (4.49”) 12.5 mm (0.49”) smooth or grooved10 mm (+5/-5)
0.39” (+0.19/-0.19)12 mm (+6/-6)
0.47” (+0.23/-0.23)
NJPB4012* 40 mm (1.57”) 44 mm (1.73”) 124 mm (4.88”) 12.5 mm (0.49”) smooth or grooved12 mm (+6/-6)
0.47” (+0.23/-0.23)14 mm (+7/-7)
0.55” (+0.27/-0.27)
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
*Indicate rubber colour and type (smooth or grooved).
55
SMOOTH
GROOVED
• Light aluminium L-shaped profiles.
• Central insert of synthetic rubber with an excellent capacity
to absorb multi-directional movements. Great elasticity,
resistant to damp, and extreme temperatures (-30ºC up to
+120ºC).
• 3 measurements of rubber (20, 30 and 40 mm / 0.79”,
1.18” and 1.57”), with a smooth or grooved surface.
• Profiles supplied in standard lengths of 3 m (118.1”).
• The rubber parts are supplied in continuous rolls.
• The complete kit includes all fastenings.
• Optional: firestop cord.
MATERIALS AND
TECHNICAL DETAILS
RUBBER COLOURS
www.emac.es
WALL-WALLOVERLAIDNOVOJUNTA PRO® BASIC VT SP
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Expansion joints in walls.• For joint widths up to 45 mm (1.77”).• Admission of movement up to 14 mm (0.55”).• Replaceable rubber.
Novojunta Pro® Basic VT SP
Beige 1013Gris 7035Negro 9005
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
Smooth rubberEXPANSION
Grooved rubber
NJPBS20* 20 mm (0.79”) 124 mm (4.88”) 12.5 mm (0.49”) smooth or grooved8 mm (+4/-4)
0.31” (+0.15/-0.15)110 mm (+5/-5)
0.39” (+0.19/-0.19)
NJPBS30* 30 mm (1.18”) 134 mm (5.27”) 12.5 mm (0.49”) smooth or grooved10 mm (+5/-5)
0.39” (+0.19/-0.19)12 mm (+6/-6)
0.47” (+0.23/-0.23)
NJPBS40* 40 mm (1.57”) 144 mm (5.67”) 12.5 mm (0.49”) smooth or grooved 12 mm (+6/-6)
0.47” (+0.23/-0.23)14 mm (+7/-7)
0.55” (+0.27/-0.27)
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
*Indicate rubber colour and type (smooth or grooved).
56
SMOOTH
GROOVED
• Expansion joints in walls.• For joint widths up to 44 mm (1.73”).• Admission of movement up to 14 mm (0.55”).• Replaceable rubber.
COLOCACIÓN
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND
TECHNICAL DETAILS
• Light aluminium L-shaped profiles.
• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).
• Profiles supplied in standard lengths of 2.5 m (98.4”).
• Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.
• Optional: firestop cord.
COLOURS & FINISHES
WALL-WALLOVERLAID NOVOJUNTA PRO® ANTI-SLIP
Novojunta Pro® Anti-slip
RUBBERS:
Black 9005
Anodised matt silver
REFERENCE FINISH JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
horizontal
NJPADAL2087 Natural34 mm (1.34”) 87 mm (3.42”)
20 mm (0.79”) grooved
10 mm (+5/-5)0.39” (+0.19/-0.19)NJPADAL2087PL Anodised matt silver
NJPADAL2097 Natural44 mm (1.73”) 97 mm (3.81”)
14 mm (+7/-7)0.55” (+0.27/-0.27)NJPADAL2097PL Anodised matt silver
Model registered as Community design No 869891-4
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
PROFILES:
57
Natural
• Joint formed of slippery aluminium profiles in anodised matt silver.
• System with the capacity to absorb large multi-directional movements.
• Profiles supplied in standard lengths of 2.5 m (98.4”).
• Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.
• Optional: firestop cord.
MATERIALS AND
TECHNICAL DETAILS
FINISHES AVAILABLE
www.emac.es
WALL-WALLOVERLAIDLARGE MOVEMENTS
NOVOJUNTA PRO® SISMO PA
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Great expansion. Ideal for areas of seismic risk or high buildings.
• Admission of movement up to 130 mm (5.11”).• For joint widths up to 100 mm (3.94”).• Joint manufactured entirely in aluminium.• Great durability, without maintenance.• Vertical (walls and façades) or horizontal (roofs)
expansion joints.
Novojunta Pro® SISMO PA
Anodised matt silver
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
EXPANSIONhorizontal
EXPANSIONvertical
NJPPAALPL25 100 mm (3.94”) 357.5 mm (14.07”)130 mm (+65/-65)
5.12” (+2.56/-2.56)10 mm (+5/-5)
0.39” (+0.19/-0.19)
SEISM
IC
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
b
a
h
58
• Great expansion. Ideal for areas of seismic risk or high buildings.
• Admission of movement up to 180 mm (7.09”).• For joint widths up to 330 mm (12.99”).• Vertical (walls and façades) or horizontal (roofs)
expansion joints.
COLOCACIÓN
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
MATERIALS AND
TECHNICAL DETAILS
• Light aluminium L-shaped profiles, perforated on their base to receive the fastenings.
• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).
• Strip widths available of 40, 85, 145, 190 y 320 mm (1.57”, 3.35”, 5.7”, 7.48” and 12.6”).
• Profiles supplied in standard lengths of 3 m (118.1”).
• The rubber parts are supplied in continuous rolls.
• The complete kit includes all fastenings.
• Optional: firestop cord.
RUBBER COLOURS
WALL-WALLFLUSH-MOUNTEDLARGE MOVEMENTS
NOVOJUNTA PRO® PA
Novojunta Pro® PA
Other colours available. Black 9005
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
NJPPA2050 20-50 mm (0.79”-1.97”) 60 mm (2.36”)
15 mm (0.59”) grooved
40 mm (+20/-20)1.57” (+0.78/-0.78)
NJPPA50100 50-100 mm (1.97”-3.94”) 105 mm (4.13”)70 mm (+35/-35)
2.75” (+1.37/-1.37)
NJPPA100160 100-160 mm (3.94”-6.3”) 165 mm (6.5”)100 mm (+50/-50)
3.94” (+1.97/-1.97)
NJPPA120200 120-200 mm (4.72”-7.87”) 210 mm (8.27”)140 mm (+70/-70)
5.51” (+2.75/-2.75)
NJPPA200330 200-330 mm (7.87”-12.99”) 340 mm (13.38”)180 mm (+90/-90)
7.09” (+3.54/-3.54)
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
SEISM
IC
59
• Matt silver anodised aluminium profiles, perforated on their base to receive the fastenings.
• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).
• Strip widths available of 40, 85, 145, 190 y 320 mm (1.57”, 3.35”, 5.7”, 7.48” and 12.6”).
• Profiles supplied in standard lengths of 3 m (118.1”).
• The rubber parts are supplied in continuous rolls.
• The complete kit includes all fastenings.
• Optional: firestop cord.
MATERIALS AND
TECHNICAL DETAILS
RUBBER COLOURS
www.emac.es
WALL-WALLOVERLAIDLARGE MOVEMENTS
NOVOJUNTA PRO® PASP
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Great expansion. Ideal for areas of seismic risk or high buildings.
• Admission of movement up to 180 mm (7.09”).• For joint widths up to 360 mm (14.17”).• Vertical (walls and façades) or horizontal (roofs)
expansion joints.
Novojunta Pro® PASP
Other colous available. Black 9005
REFERENCE JOINT WIDTH(a)
VISIBLE WIDTH(b)
PROFILE HEIGHT(h) RUBBER TYPE EXPANSION
NJPASP2060 20-60 mm (0.79”-2.36”) 110 mm (4.33”)
12 mm (0.47”) grooved
40 mm (+20/-20)1.57” (+0.78/-0.78)
NJPASP50120 50-120 mm (1.97”-4.72”) 155 mm (6.10”)70 mm (+35/-35)
2.75” (+1.37/-1.37)
NJPASP110180 110-180 mm (4.33”-7.09”) 215 mm (8.46”)100 mm (+50/-50)
3.94” (+1.97/-1.97)
NJPASP120240 120-240 mm (4.72”-9.45”) 260 mm (10.24”)140 mm (+70/-70)
5.51” (+2.75/-2.75)
NJPASP240360 240-360 mm (9.45”-14.17”) 390 mm (15.35”)180 mm (+90/-90)
7.09” (+3.54/-3.54)
SEISM
IC
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
a
b
h
60
WATERTIGHT MEMBRANE
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
REFERENCEMEMBRANE
WIDTH JOINT WIDTH PRESENTATION
MEMEST140 140 mm (5.51”) 30 mm (1.18”) 10 or 20 lineal meters rolls
MEMEST170 170 mm (6.69”) 40 mm (1.57”) 10 or 20 lineal meters rolls
• Membrane of EPDM rubber with adhesive incorporated to seal expansion joints that must be watertight.• They can be installed to complement a system of profiles in an expansion joint, or as an individual product.• Great elasticity. They allow multi-directional movements.• Waterproof.• Resistant to extreme temperatures (-30ºC to +120ºC), diluted acids or moderate concentrates, steam and hot water.• Does not give off toxic smoke in the event of fire.
62
11. FIRESTOP JOINTS uOur firestop joint systems ensure a hermetic seal against flames and hot or inflammable gases, avoiding any chimney effect among construction elements, both horizontally and vertically.The joints must ensure a degree of fire barrier protection that at least equals the protection on the works for which they are destined.The combination between mastic, firestop cord and the different finishing systems on joints enables between 2 and 4 hours of fire protection to be achieved.Our firestop joint systems have surpassed CSTB trials, which certify the duration of isolation of flames and hot gases, as well as thermal insulation.
63
FIRESTOP CORD
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• For standard and seismic joints from 10 to 200 mm (0.39 - 7.87”) wide, in floors, walls and roofs.
• Cord composed of fireproof, non-biodegradable, mineral fibres, covered in a network of fibreglass hairs.
• Reaction to fire: Class M0 (incombustible).• Resistance to fire: 240 minutes as per Standard EN 1366-4.• Pursuant to the most recent European standards and regulations:• Does not absorb humidity.• Unaffected by the usual aggressive chemical agents.• Easy to install using refractory glue.• Does not contain asbestos.• Chemically neutral, it does not cause toxic gases to escape in the
event of fire.• Use temperature: 780º C• Fusion temperature: 1200º C
REFERENCEJOINT WIDTH
(DISTANCE BETWEEN FRAMES)CORD DIAMETER PRESENTATION
NJCF12 10 mm (0.39”) 12 mm (0.47”) 50 m (54.68 yd) roll
NJCF20 15 mm (0.59”) 20 mm (0.79”) 30 m (32.8 yd) roll
NJCF30 20 mm (0.79”) 30 mm (1.18”) 30 m (32.8 yd) roll
NJCF40 25 mm (0.98”) 40 mm (1.57”) 30 m (32.8 yd) roll
NJCF50 35 mm (1.38”) 50 mm (1.97”) 25 m (27.34 yd) roll
NJCF60 40 mm (1.57”) 60 mm (2.36”) 25 m (27.34 yd) roll
NJCF70 50 mm (1.97”) 70 mm (2.75”) 20 m (21.87 yd) roll
NJCF80 55 mm (2.16”) 80 mm (3.15”) 20 m (21.87 yd) roll
NJCF90 60 mm (2.36”) 90 mm (3.54”) 18 m (19.6 yd) roll
NJCF100 70 mm (2.75”) 100 mm (3.94”) 10 m (10.9 yd) roll
NJCF120 80 mm (3.15”) 120 mm (4.72”) 2 m (78.7”) section
NJCF150 100 mm (3.94”) 150 mm (5.90”) 2 m (78.7”) section
NJCF180 120 mm (4.72”) 180 mm (7.09”) 2 m (78.7”) section
For joint widths greater than 120 mm (4.72”), ask us.
FIRESTOP CORD ACCESSORIESREFRACTORY GLUE• To glue cords to the sides of the joint.• Approximate consumption: 50 g per full linear metre (2 sides).
REFERENCE CONTAINER SIZE
NJCFCOLA14 1,4 kg.
NJCFCOLA07 7 kg.
REFERENCE PRESENTATION
NJCFUN300 300 mm (11.8”), 20 m (21.87 yd) roll.
NJCFUN1000 1000 mm (39.37”), 20 m (21.87 yd) roll.
FELT JOINTS• Recommended for connecting different cord sections.• Consumption: 4 units per linear metre
64
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
FIRESTOP MASTIC
• Silicon elastomer, resistant to high temperatures.• Light grey.• Density: 1.24.• Hardness Shore A: 16.• Expansion capacity until breakage: 450% (DIN53504)• Service temperature: - 50ºC +120ºC.• Good chemical resistance to oxidation, ozone, salt air, bleach, acids and the usual diluted
bases and solvents.• Does not give off toxic smoke in the event of fire.
REFERENCE PRESENTATION
NJCFMASTIC Box of 25 x 1/3-litre cartridges
JOINT WIDTH MASTIC LAYERCONSUMPTION X 1/3-LITRE
CARTRIDGE
10 mm (0.39”) 8 mm (0.31”) 3.9 m (153.5”)
20 mm (0.79”) 10 mm (0.39”) 1.5 m (59.05”)
30 mm (1.18”) 15 mm (0.59”) 0.7 m (27.56”)
40 mm (1.57”) 20 mm (0.79”) 0.3 m (11.81”)
50 mm (1.97”) 25 mm (0.98”) 0.2 m (7.87”)
Approximate consumption:
65
COLOCACIÓN• Hollow, extruded PVC profile in cement grey.• Approximate weight: 500 g/ml (80 mm / 3.15” model)
and 250 g/ml (40 mm / 1.6” model).• Profiles supplied in standard lengths of 2.5 m (98.4”).• Presentation in cardboard pallet boxes.
MATERIALS AND TECHNICAL DETAILS
1. Attach the profiles with some dabs of concrete every 60-80 cm (25-30”).2. Level and finish attachment leaving the upper third closest to the vertex free.3. Cut the intersections using a mitre block and hacksaw to ensure the vertices coincide perfectly.4. Do not place dabs of concrete at the intersections. The closest must be 20- 25 cm (8-10”) away.5. The profiles are simply joined by inserting a rod or corrugated wire into the gaps in the joints.6. Concrete pouring: pour either traditionally or by pumping.7. Straight-edging and floating: do the straight-edging manually and then use the concrete vibrator. This process avoids deterioration of the joint.8. Finish: leave the joint vertex free for a perfect finish.
NOVOJUNTA® HORMIGONADO
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Fractioning joint for controlling and absorbing floor movements, thereby avoiding cracking.
• It controls the expansion and retraction of the concrete in floors up to 24 cm (9.4”) thick.
• Manufactured in PVC and available in heights of 40 (1.6”) and 80 mm (3.15”).
• Easy handling. No need for cutting and sealing.
• Acts as formwork and screed• It does not deteriorate over time.• Once finished, it is practically invisible.• Perfect adherence.
Novojunta® Hormigonado
REFERENCE WIDTH (a)
VISIBLE WIDTH(b)
HEIGHT PROFILE
(h)
QUANTITY X BOX
NJHOR80GR25 60 mm (2.36”)2 mm (0.1”)
80 mm (3.15”) 20 bars
NJHOR40GR25 30 mm (1.18”) 40 mm (1.57”) 60 bars
68
• Profile for induction of fractioning for control joints or contraction of concrete works. • Manufactured in PVC, this protects the concrete by allowing the initial retraction movement and later expansion and contraction movements.• Once installed, it remains gripped in the concrete.
COLOCACIÓN NOVOJUNTA PRO® HORMIGONADO
www.emac.es
Novojunta Pro® Hormigonado
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
REFERENCE WIDTH (a)
VISIBLE WIDTH
(b)
HEIGHT PROFILE
(h)
QUANTITY X BOX
NJPHOR40GR25 38 mm (1.5”) 2 mm (0.1”) 40 mm (1.57”) 25 bars
69
•
S L XL XXL
• It protects and beautifies the expansion joints on façades, walls, roofs and floors bearing light traffic.
• Designed to cover joints from 10 to 130 mm wide (0.4”-5.12”).
• Fast and easy to install thanks to its clip system, avoiding the use of adhesives and screws.
• For new work or renovations.• For interior or exterior use.• This is an ideal profile for all types of buildings: hospitals,
shopping centres, airports, hotels, homes, etc.• Manufactured in anti-UV PVC.• 4 profile models available by width: 50, 70, 90 and 150
mm (2”, 2.8”, 3.5” and 5.9”).• Flat and angled models.• Colours available: white (RAL 9016), beige (RAL 1015)
and grey (RAL 7035).
• Manufactured in PVC according to the latest standards, production conforming to ISO 9001.
• The clips, manufactured in stainless steel, guarantee stable attachment yet permanent flexibility (spring effect). There are 4 models of clip available according to the width of joint to be covered.
• Profiles supplied in standard lengths of 3 m (118”).• The profile is supplied with the appropriate clip model and in the
quantity required (5 clips for each 3-m / 118” profile).
MATERIALS AND TECHNICAL DETAILS
NOVOTAPAJUNTAS NDP
Novotapajuntas NDP Flat
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
INSTALLATION
1. Insert a clip.2. Change the direction of clips to insert one after another.3. Prepared for installation.4. Final placement.
1. 2.
3. 4.
TYPE JOINT WIDTH (a)
PROFILE WIDTH (b) COLOURS AVAILABLE MODEL OF CLIP REFERENCE NUMBER OF
CLIPS
Flat
Maximum 35 mm (1.38”) 50 mm (1.97”) White, Beige, Grey S NTDPP50*3
5
Maximum 50 mm (1.97”) 70 mm (2.75”) White, Beige, Grey S / L NTDPP70*3
Maximum 70 mm (2.75”) 90 mm (3.54”) White S / L / XL NTDPP9OBL
Maximum 130 mm (5.12”) 150 mm (5.90”) White S / L / XL / XXL NTDPP150BL
Angle
Maximum 35 mm (1.38”) 50 mm (1.97”) White, Beige, Grey S NTDPP50*3
Maximum 50 mm (1.97”) 70 mm (2.75”) White, Beige, Grey S / L NTDPP70*3
Maximum 70 mm (2.75”) 90 mm (3.54”) White S / L / XL NTDPP90BL
Novotapajuntas NDP Angle
*Indicate colour: White (BL), Beige (BE), Grey (GR).
72
S L XL XXL
• It protects and beautifies the expansion joints on façades, walls, roofs and floors bearing light traffic.
• Designed to cover joints from 10 to 150 mm wide (0.4”-5.9”).
• Fast and easy to install thanks to its clip system, avoiding the use of adhesives and screws.
• For new work or renovations.
• For interior or exterior use.
• This is an ideal profile for all types of buildings: hospitals, shopping centres, airports, hotels, homes, etc.
• Manufactured in aluminium.
• 7 profile models available for flat installation: 50, 70, 90, 120, 140, 180 and 210 mm (2”, 2.8”, 3.5”, 4.7”, 5.5”, 7.1” and 8.3”).
• 4 profile models available for angled installation: 50, 70, 90 and 120 mm (2”, 2.8”, 3.5” and 4.7”).
COLOCACIÓN NOVOTAPAJUNTAS NDA
MATERIALS AND TECHNICAL DETAILS
• Manufactured in anodised, extruded aluminium.
• The clips, manufactured in stainless steel, guarantee stable attachment yet permanent flexibility (spring effect). There are 4 models of clip available according to the width of joint to be covered.
• Profiles supplied in standard lengths of 3 m (118”).
• The profile is supplied with the appropriate clip model and in the quantity required for installation to wall or floor.
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
INSTALLATION1. Insert a clip.2. Change the direction of clips to insert one after another.3. Prepared for installation.4. Final placement.
1. 2.
3. 4.
TYPE JOINT WIDTH (a)
PROFILE WIDTH (b) MODEL OF CLIP REFERENCE NUMBER OF CLIPS
Flat
10 to 35 mm (0.39” to 1.38”) 50 mm (1.97”) S NTDAP50ALNA3 Walls: 4 Floors: 10
35 to 50 mm (1.38” to 1.97”) 70 mm (2.75”) S / L NTDAP70ALNA3 Walls: 4 Floors: 10
40 to 70 mm (1.57” to 2.75”) 90 mm (3.54”) L / XL NTDAP90ALNA3 Walls: 4 Floors: 10
60 to 90 mm (2.36” to 3.54”) 120 mm (4.72”) L / XL NTDAP120ALN3 Walls: 4 Floors: 10
80 to 110 mm (3.15” to 4.33”) 140 mm (5.51”) XL NTDAP140ALN3 Walls: 4 Floors: 10
100 to 130 mm (3.94” to 5.12”) 180 mm (7.09”) XL / XXL NTDAP180ALN3 Walls: 4 Floors: 10
120 to 150 mm (4.72” to 5.90”) 210 mm (8.27”) XXL NTDAP210ALN3 Walls: 4 Floors: 10
Angle
10 to 35 mm (0.39” to 1.38”) 50 mm (1.97”) S NTDAA50ALNA3 Walls: 4 Floors: 10
35 to 50 mm (1.38” to 1.97”) 70 mm (2.75”) S / L NTDAA70ALNA3 Walls: 4 Floors: 10
40 to 70 mm (1.57” to 2.75”) 90 mm (3.54”) L / XL NTDAA90ALNA3 Walls: 4 Floors: 10
60 to 90 mm (2.36” to 3.54”) 120 mm (4.72”) L / XL NTDAA120ALNA Walls: 4 Floors: 10
Novotapajuntas NDA Flat Novotapajuntas NDA Angle
73
• •
• •
• This joint cover protects and beautifies the expansion joints on walls and floors.
• Manufactured in matt silver anodised aluminium. Highly decorative.
• It allows the smooth, jolt-free passage of shopping trolleys, wheelchairs, stretchers, etc.
• It is supplied with flexible butyl adhesive for immediate attachment. By order it can also be supplied with countersunk holes on one side.
• Profiles supplied in standard lengths of 3 m (118”).• Available in 5 sizes: 60, 80, 100, 120 and 140 mm
(2.4”, 3.2”, 3.9”, 4.7” and 5.5”).
NOVOTAPAJUNTAS NDAS
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
NOVOTAPAJUNTAS NDAS
• To cover the expansion joints on walls, façades, roofs and floors.
• Manufactured in natural extruded aluminium.• Visible face grooved anti-slip.• Allows the passage of intense medium-load traffic.• Profiles supplied in standard lengths of 3 m
(118”).• Available in 4 sizes: 120, 180, 210 and 320 mm
(4.7”, 7.1”, 8.3” and 12.6”).• Supplied with countersunk holes drilled in one side
for screw installation.
NOVOTAPAJUNTAS NCJE
PROFILE WIDTH (b) PACKAGING REFERENCE
60 mm (2.36”) 10 units NTDAS60ALPL3
80 mm (3.15”) 10 units NTDAS80ALPL3
100 mm (3.94”) 10 units NTDAS100ALPL
120 mm (4.72”) 10 units NTDAS120ALPL
140 mm (5.51”) 10 units NTDAS140ALPL
JOINT WIDTH (a)
PROFILE WIDTH (b) REFERENCE
Up to 50 mm (1.97”) 120 mm (4.72”) NTCJE120ALNA
Up to 100 mm (3.94”) 180 mm (7.09”) NTCJE180ALNA
Up to 130 mm (5.12”) 210 mm (8.27”) NTCJE210ALNA
Up to 200 mm (7.87”) 320 mm (12.6”) NTCJE320ALNA
74
Novotapajuntas NDAS
Novotapajuntas NCJE
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• This joint cover protects and beautifies the expansion joints on façades, walls, roofs and floors.• Manufactured in matt silver anodised aluminium. Highly decorative.• Its visible face is grooved and anti-slip. It is an ideal profile for high-traffic areas such as hospitals, shopping centres, airports and hotels.• Profiles supplied in standard lengths of 2.5 m (98.4”).• Supplied with protective film on the visible face.• The 80-mm (3.15”) model can also be supplied with incorporated adhesive for fast, easy installation, or with countersunk holes for attach-
ment using screws.• The 135-mm (5.31”) model can also be supplied with countersunk holes for attachment using screws.
• •
NOVOTAPAJUNTAS GTA
GTA 80 GTA 135
MODEL JOINT WIDTH (a)
PROFILE WIDTH (b) PACKAGING INSTALLATION REFERENCE
GTA80 Up to 30 mm (1.18”) 80 mm (3.15”) 10 units
Without adhesive NTGTAL80PL25
With adhesive NTGTAL80PLAD
With holes NTGTAL80PLA
GTA135 Up to 55 mm (2.16”) 135 mm (5.31”) 5 unitsWithout holes NTGTAL135PL
With holes NTGTAL135PLA
75
•• This joint cover protects and beautifies the expansion joints
on façades, walls, roofs and floors.
• Manufactured in shiny stainless steel AISI-304. Highly decorative.
• This is an ideal profile for high-traffic areas such as hospitals, shopping centres, airports and hotels.
• Profiles supplied in standard lengths of 2.5 m (98.4”).• Supplied with protective film on the visible face.• Also available with adhesive incorporated for fast, easy
installation.
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
NOVOTAPAJUNTAS TX
• This joint cover protects and beautifies the expansion joints on façades, walls, roofs and floors.
• Manufactured in shiny stainless steel AISI-304. Highly decorative.
• High resistance. This is an ideal profile for high-traffic areas such as hospitals, shopping centres, airports and hotels.
• Profiles supplied in standard lengths of 2 m (98.4”).• Supplied with protective film on the visible face.• Supplied with countersunk holes (10 mm / 0.4”
diameter) drilled in one side for screw installation (not included).
NOVOTAPAJUNTAS NDASSUELO/PAREDCARGA LIGERAENRASADA
NOVOTAPAJUNTAS GTX
Novotapajuntas TX
Novotapajuntas GTX
MODEL JOINT WIDTH (a)
PROFILE WIDTH (b) PACKAGING INSTALLATION REFERENCE
TX60 Up to 20 mm (0.79”) 60 mm (2.36”) 10 unitsWithout adhesive NTTXAI60NA
With adhesive NTTXAI60NAAD
TX80 Up to 30 mm (1.18”) 80 mm (3.15”) 10 unitsWithout adhesive NTTXAI80NA
With adhesive NTTXAI80NAAD
TX100 Up to 40 mm (1.57”) 100 mm (3.94”) 5 unitsWithout adhesive NTTXAI100NA
With adhesive NTTXAI100NAD
MODEL JOINT WIDTH (a) PROFILE WIDTH (b) PACKAGING REFERENCE
GTX180 Up to 100 mm (3.94”) 180 mm (7.09”) 4 units NTGTXAI180NA
GTX220 Up to 120 mm (4.72”) 220 mm (8.66”) 4 units NTGTXAI220NA
76
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• Profile of matt silver anodised aluminium, designed for decorative separation between pavings of identical or contrasting finishes, providing the resistance typical of this material.
• Easy to install, it is attached once the pavement has been laid. The upper section covers the joint created by the tiles and their display face, wider and more visible, imbues any environment with an elegant touch.
• This is a perfect profile to install on flexible paving, for example in gymnasiums.
• It is also ideal for covering those joints that have deteriorated over time.
• Available in 2 lengths: 1 m and 2.5 m (39.4” and 98.4”).
COLOCACIÓN NOVOSEPARA 10
Novotapajuntas NDA WIDTH (b)
PACKAGING PROFILE LENGTH REFERENCE
40 mm (1.57”) 50 units100 cm (39.4”) NS10AL40PL1
250 cm (98.4”) NS10AL40PL25
77
•
PROFILE HEIGHT(h)
VISIBLE WIDTH(a)
EXPANSIONHorizontal
PACKAGING COLOUR REFERENCE
4.5 mm (0.18”) 6.4 mm (0.25”)4.5 mm (+0.5/-4)
0.18” (+0.02/-0.16)20 units
White NJUAL04BL25
Grey NJUAL04GR25
Beige NJUAL04BE25
Brown NJUAL04MA25
Black NJUAL04NE25
6 mm (0.23”) 8 mm (0.31”)3 mm (+1/-2)
0.12” (+0.04/-0.08)20 units
Grey NJUAL06NA25
Black NJUAL06NE25
Ivory NJUAL06MF25
8 mm (0.31”) 8 mm (0.31”)3 mm (+1/-2)
0.12” (+0.04/-0.08)20 units
Grey NJUAL08NA25
Black NJUAL08NE25
Ivory NJUAL08MF25
10 mm (0.39”) 8 mm (0.31”)3 mm (+1/-2)
0.12” (+0.04/-0.08)20 units
Grey NJUAL10NA25
Black NJUAL10NE25
Ivory NJUAL10MF25
12.5 mm (0.49”) 8 mm (0.31”)3 mm (+1/-2)
0.12” (+0.04/-0.08)20 units
Grey NJUAL12NA25
Black NJUAL12NE25
Ivory NJUAL12MF25
15 mm (0.59”) 8 mm (0.31”)3 mm (+1/-2)
0.12” (+0.04/-0.08)20 units
Grey NJUAL15NA25
Black NJUAL15NE25
Ivory NJUAL15MF25
17,5 mm 8 mm 3 mm (+1/-2) 20 ud.
Gris NJUAL17NA25
Negro NJUAL17NE25
Marfil NJUAL17MF25
20 mm 8 mm 3 mm (+1/-2) 10 ud.
Gris NJUAL20NA25
Negro NJUAL20NE25
Marfil NJUAL20MF25
22,5 mm 8 mm 3 mm (+1/-2) 10 ud.
Gris NJUAL22NA25
Negro NJUAL22NE25
Marfil NJUAL22MF25
25 mm 8 mm 3 mm (+1/-2) 10 ud.
Gris NJUAL25NA25
Negro NJUAL25NE25
Marfil NJUAL25MF25
27,5 mm 8 mm 3 mm (+1/-2) 10 ud.
Gris NJUAL27NA25
Negro NJUAL27NE25
Marfil NJUAL27MF25
30 mm 8 mm 3 mm (+1/-2) 10 ud.
Gris NJUAL30NA25
Negro NJUAL30NE25
Marfil NJUAL30MF25
41 mm 11 mm 4,7 mm (+1,2/-3,5) 10 ud. Negro NJUAL41NA25
51 mm 11 mm 4,7 mm (+1,2/-3,5) 10 ud. Negro NJUAL51NA25
125 mm 11 mm 4,7 mm (+1,2/-3,5) 25 ud. Negro NJUAL125NA25
• Fractioning and expansion joint consisting of two aluminium profiles with a central body of EPDM micro-cellular rubber.
• Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations.
• Available for paving up to 125 mm (4.9”) thick. For other thicknesses, ask us.
• It allows polishing of the floor after installation.• Profiles supplied in standard lengths of 2.5 m
(98.4”).• Supplied with protective film on the visible face.• Available in black, grey and marble (up to 30 mm
/ 1.2” high). Also in brown, white and beige in the model that is 4.5 mm / 0.18” high.
• For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).
• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
GENERAL RECOMMENDATIONS FOR INSTALLATION:
NOVOJUNTA® METALLIC
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
Novojunta® Metallic
80
• Profile for perimeter expansion joints consisting of an aluminium profile with a body of EPDM micro-cellular rubber.
• Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations.
• Available for paving up to 12 mm (0.47”) thick.• It allows polishing of the floor after installation.• Profiles supplied in standard lengths of 2.5 m
(98.4”).• Supplied with protective film on the visible face.• Available in black.
NOVOJUNTA® METALLIC PERIMETER
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
Novojunta® Metallic Perimeter
PROFILE HEIGHT(h)
VISIBLE WIDTH(a)
EXPANSIONHorizontal PACKAGING COLOUR REFERENCE
10 mm (0.39”) 6 mm (0.23”)3 mm (+1/-2)
0.12” (+0.04/-0.08)20 units Black NJUPAL10NA
12 mm (0.47”) 6 mm (0.23”)3 mm (+1/-2)
0.12” (+0.04/-0.08)20 units Black NJUPAL12NA
Alto perfil(h)
Ancho visible(a)
DilataciónHorizontal
Embalaje Color REFERENCIA
4,5 mm 6,4 mm 4,5 mm (+0,5/-4) 20 ud.
Blanco NJUAL04BL25
Gris NJUAL04GR25
Beige NJUAL04BE25
Marrón NJUAL04MA25
Negro NJUAL04NE25
6 mm 8 mm 3 mm (+1/-2) 20 ud.
Gris NJUAL06NA25
Negro NJUAL06NE25
Marfil NJUAL06MF25
8 mm 8 mm 3 mm (+1/-2) 20 ud.
Gris NJUAL08NA25
Negro NJUAL08NE25
Marfil NJUAL08MF25
10 mm 8 mm 3 mm (+1/-2) 20 ud.
Gris NJUAL10NA25
Negro NJUAL10NE25
Marfil NJUAL10MF25
12,5 mm 8 mm 3 mm (+1/-2) 20 ud.
Gris NJUAL12NA25
Negro NJUAL12NE25
Marfil NJUAL12MF25
15 mm 8 mm3 mm (+1/-2)
0.12” (+0.04/-0.08)20 ud.
Gris NJUAL15NA25
Negro NJUAL15NE25
Marfil NJUAL15MF25
17.5 mm (0.69”) 8 mm (0.31”)3 mm (+1/-2)
0.12” (+0.04/-0.08)20 units
Grey NJUAL17NA25
Black NJUAL17NE25
Ivory NJUAL17MF25
20 mm (0.79”) 8 mm (0.31”)3 mm (+1/-2)
0.12” (+0.04/-0.08)10 units
Grey NJUAL20NA25
Black NJUAL20NE25
Ivory NJUAL20MF25
22.5 mm (0.88”) 8 mm (0.31”)3 mm (+1/-2)
0.12” (+0.04/-0.08)10 units
Grey NJUAL22NA25
Black NJUAL22NE25
Ivory NJUAL22MF25
25 mm (0.98”) 8 mm (0.31”)3 mm (+1/-2)
0.12” (+0.04/-0.08)10 units
Grey NJUAL25NA25
Black NJUAL25NE25
Ivory NJUAL25MF25
27.5 mm (1.08”) 8 mm (0.31”)3 mm (+1/-2)
0.12” (+0.04/-0.08)10 units
Grey NJUAL27NA25
Black NJUAL27NE25
Ivory NJUAL27MF25
30 mm (1.18”) 8 mm (0.31”)3 mm (+1/-2)
0.12” (+0.04/-0.08)10 units
Grey NJUAL30NA25
Black NJUAL30NE25
Ivory NJUAL30MF25
41 mm (1.61”) 11 mm (0.43”)4.7 mm (+1.2/-3.5)0.18” (+0.05/-0.13)
10 units Black NJUAL41NA25
51 mm (2.01”) 11 mm (0.43”)4.7 mm (+1.2/-3.5)0.18” (+0.05/-0.13)
10 units Black NJUAL51NA25
125 mm (4.92”) 11 mm (0.43”)4.7 mm (+1.2/-3.5)0.18” (+0.05/-0.13)
4 units Black NJUAL125NA25
81
•• Fractioning and expansion joint consisting of two metal
profiles with a central body of EPDM micro-cellular rubber.
• Available in shiny stainless steel AISI-304, or in matt silver anodised or natural aluminium.
• This movement joint is highly decorative, since it has a beautifying membrane on its visible face that masks the inner EPDM body.
• Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations.
• Available for paving up to 126 mm (4.9”) thick. For other thicknesses, ask us.
• Profiles supplied in standard lengths of 2.5 m (98.4”).• Supplied with protective film on the visible face.
• For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).
• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
GENERAL RECOMMENDATIONS FOR INSTALLATION:
NOVOJUNTA DECOR®
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
Novojunta Decor® Aluminium
Novojunta Decor® Stainless Steel
MATERIAL PROFILE HEIGHT (h) VISIBLE WIDTH (a) EXPANSION Horizontal PACKAGING FINISH REFERENCE
Aluminium
9.5 mm (0.37”) 12.5 mm (0.49”)3 mm (+1/-2)
0.12” (+0.04/-0.08)20 units
Natural NJDEAL10NA
Anodised matt silver NJDEAL10PL
12 mm (0.47”) 12.5 mm (0.49”)3 mm (+1/-2)
0.12” (+0.04/-0.08)20 units
Natural NJDEAL12NA
Anodised matt silver NJDEAL12PL
15 mm (0.59”) 12.5 mm (0.49”)3 mm (+1/-2)
0.12” (+0.04/-0.08)20 units
Natural NJDEAL15NA
Anodised matt silver NJDEAL15PL
20 mm (0.79”) 12.5 mm (0.49”)3 mm (+1/-2)
0.12” (+0.04/-0.08)10 units
Natural NJDEAL20NA
Anodised matt silver NJDEAL20PL
41 mm (1.61”) 12.5 mm (0.49”)4.7 mm (+1.2/-3.5)0.18” (+0.05/-0.13)
10 units Natural NJDEAL41NA
51 mm (2”) 12.5 mm (0.49”)4.7 mm (+1.2/-3.5)0.18” (+0.05/-0.13)
10 units Natural NJDEAL51NA
126 mm (4.96”) 12.5 mm (0.49”)4.7 mm (+1.2/-3.5)0.18” (+0.05/-0.13)
4 units Natural NJDEAL126NA
Stainless steel
10 mm (0.39”) 12.5 mm (0.49”)3 mm (+1/-2)
0.12” (+0.04/-0.0820 units High brightness NJDEAI10NA
12 mm (0.47”) 17 mm (0.67”)3 mm (+1/-2)
0.12” (+0.04/-0.08)10 units High brightness NJDEAI12NA
15 mm (0.59”) 17 mm (0.67”)3 mm (+1/-2)
0.12” (+0.04/-0.08)10 units High brightness NJDEAI15NA
20 mm (0.79”) 12.5 mm (0.49”)3 mm (+1/-2)
0.12” (+0.04/-0.08)10 units High brightness NJDEAI20NA
41 mm (1.61”) 10.8 mm (0.42”)4.7 mm (+1.2/-3.5)0.18” (+0.05/-0.13)
10 units High brightness NJDEAI41NA
51 mm (2”) 10.8 mm (0.42”)4.7 mm (+1.2/-3.5)0.18” (+0.05/-0.13)
10 units High brightness NJDEAI51NA
126 mm (4.96”) 10.8 mm (0.42”)4.7 mm (+1.2/-3.5)0.18” (+0.05/-0.13)
4 units High brightness NJDEAI126NA
82
• Fractioning and expansion joint consisting of two matt silver anodised aluminium profiles with a central body of
EPDM micro-cellular rubber.
• This movement joint is highly decorative, since it has a beautifying membrane on its visible face that masks the
inner EPDM body.
• Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and
contractions of the paving, caused by thermal variations.
• The central EPDM micro-cellular rubber body, 20 mm (0.79”) thick, allows a great deal of movement. Its size and
functionality enables its application as a structural joint.
• Its use is also recommended in façades.• Profiles supplied in standard lengths of 2.5 m (98.4”).• Supplied with protective film on the visible face.
COLOCACIÓN NOVOJUNTA DECOR® XL
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
Novojunta Decor® XL
• For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).
• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 40 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
GENERAL RECOMMENDATIONS FOR INSTALLATION:
HEIGHT PROFILE(h)
VISIBLE WIDTH(a)
EXPANSIONHorizontal
PACKAGING FINISH REFERENCE
12 mm (0.47”) 28 mm (1.10”)12 mm (+2/-10)
0.47” (+0.08/-0.39)10 units Anodised matt silver NJDEXLAL12PL
83
•• Arrow-shaped fractioning and expansion joint, designed to be
installed in conjunction with thick paving.
• It consists of two natural aluminium profiles and a central body of EPDM micro-cellular rubber, with an excellent capacity for absorbing the contractions and expansions of the paving.
• This movement joint is especially conceived for installing paving using traditional mortar. We recommend installing it slightly below the level of the paving, to enable the floor to be polished.
• Profiles supplied in standard lengths of 2.5 m (98.4”).
• Supplied with protective film on the visible face.
• For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).
• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
GENERAL RECOMMENDATIONS FOR INSTALLATION:
NOVOJUNTA® METALLIC FLECHA
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
Novojunta® Metallic flecha
HEIGHT PROFILE(h)
VISIBLE WIDTH(a) FINISH EXPANSION
Horizontal PACKAGING REFERENCE
26 mm (1.02”)
11 mm (0.43”) Natural4.7 mm (+1.2/-3.5)0.18” (+0.05/-0.13)
30 units NJFAL26NA
35 mm (1.38”) 30 units NJFAL35NA
50 mm (1.97”) 20 units NJFAL50NA
65 mm (2.56”) 10 units NJFAL65NA
85 mm (3.35”) 10 units NJFAL85NA
125 mm (4.92”) 5 units NJFAL125NA
• Profile with a body manufactured in PVC and a central clipped area manufactured in aluminium.
• It is used as a dividing joint between paving and can be installed in all type of surfaces.
• It can be attached before or after installing the paving.• It allows later polishing.• Profiles supplied in standard lengths of 3 m (118”).
NOVOJUNTA® JSI
Novojunta® JSI
HEIGHT PROFILE(h)
VISIBLE WIDTH(a) PACKAGING REFERENCE
30 mm (1.18”) 6 mm (0.23”) 10 units NJS1630AL3
84
• Arrow-shaped fractioning and expansion joint, designed to be installed in conjunction with thick paving.
• It consists of two metal profiles and a central body of EPDM micro-cellular rubber, with an excellent capacity for
absorbing the contractions and expansions of the paving.
• Available in shiny stainless steel, or in matt silver anodised or natural aluminium.
• This movement joint is highly decorative, since it has a beautifying membrane on its visible face that masks the
inner EPDM body.
• Especially for installing paving using traditional mortar. We recommend installing it slightly below the level of the
paving, to enable the floor to be polished.
• Profiles supplied in standard lengths of 2.5 m (98.4”).• Supplied with protective film on the visible face.
COLOCACIÓN NOVOJUNTA® DECOR FLECHA
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
Novojunta® Decor flecha
Aluminium
• For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).
• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
GENERAL RECOMMENDATIONS FOR INSTALLATION:Stainless steel
MATERIAL PROFILE HEIGHT(h)
VISIBLE WIDTH(a)
EXPANSION Horizontal PACKAGING FINISH REFERENCE
Aluminium
30 mm (1.18”) 12.5 mm (0.49”)4.7 mm (+1.2/-3.5)
0.18” (+0.05/-0.13))30 units
Natural NJDFAL30NA
Anodised matt silver NJDFAL30PL
35 mm (1.38”) 12.5 mm (0.49”)4.7 mm (+1.2/-3.5)
0.18” (+0.05/-0.13))30 units
Natural NJDFAL35NA
Anodised matt silver NJDFAL35PL
50 mm (1.97”) 12.5 mm (0.49”)4.7 mm (+1.2/-3.5)
0.18” (+0.05/-0.13))30 units
Natural NJDFAL50NA
Anodised matt silver NJDFAL50PL
65 mm (2.56”) 12.5 mm (0.49”)4.7 mm (+1.2/-3.5)
0.18” (+0.05/-0.13))10 units
Natural NJDFAL65NA
Anodised matt silver NJDFAL65PL
85 mm (3.35”) 12.5 mm (0.49”)4.7 mm (+1.2/-3.5)
0.18” (+0.05/-0.13))10 units
Natural NJDFAL85NA
Anodised matt silver NJDFAL85PL
125 mm (4.92”) 12.5 mm (0.49”)4.7 mm (+1.2/-3.5)
0.18” (+0.05/-0.13))5 units
Natural NJDFAL125NA
Anodised matt silver NJDFAL125PL
Stainless steel
30 mm (1.18”) 10.8 mm (0.42”)4.7 mm (+1.2/-3.5)
0.18” (+0.05/-0.13))30 units High brightness NJDFAI30NA
35 mm (1.38”) 10.8 mm (0.42”)4.7 mm (+1.2/-3.5)
0.18” (+0.05/-0.13))30 units High brightness NJDFAI35NA
50 mm (1.97”) 10.8 mm (0.42”)4.7 mm (+1.2/-3.5)
0.18” (+0.05/-0.13))30 units High brightness NJDFAI50NA
85
•• Fractioning and expansion joint manufactured in
co-extruded PVC, formed of one rigid PVC part that efficiently protects the paving borders, and another flexible PVC part that enables surface tensions to be absorbed.
• Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations.
• It is suitable for supporting all load types.
• Available in 5 colours: white, grey, beige, brown and black.
• Profiles supplied in standard lengths of 2.5 m (98.4”).
• If the floor will be polished, we recommend installing it slightly below the pavement level.
• For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).
• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 40 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
GENERAL RECOMMENDATIONS FOR INSTALLATION:
NOVOJUNTA® 1 PVC
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
Novojunta® 1 PVC
HEIGHT PROFILE(h)
VISIBLE WIDTH(a)
EXPANSION Horizontal PACKAGING COLOUR REFERENCE
25 mm (0.98”) 8 mm (0.31”)1.4 mm (+0.7/-0.7)
0.055” (+0.027/-0.027)50 units
White NJ1PV25BL
Grey NJ1PV25GR
Beige NJ1PV25BE
Brown NJ1PV25MA
Black NJ1PV25NE
30 mm (1.18”) 8 mm (0.31”)1.4 mm (+0.7/-0.7)
0.055” (+0.027/-0.027)50 units
White NJ1PV30BL
Grey NJ1PV30GR
Beige NJ1PV30BE
Brown NJ1PV30MA
Black NJ1PV30NE
35 mm (1.38”) 8 mm (0.31”)1.4 mm (+0.7/-0.7)
0.055” (+0.027/-0.027)50 units
White NJ1PV35BL
Grey NJ1PV35GR
Beige NJ1PV35BE
Brown NJ1PV35MA
Black NJ1PV35NE
40 mm (1.57”) 8 mm (0.31”)1.4 mm (+0.7/-0.7)
0.055” (+0.027/-0.027)25 units
White NJ1PV40BL
Grey NJ1PV40GR
Beige NJ1PV40BE
Brown NJ1PV40MA
Black NJ1PV40NE
50 mm (1.97”) 8 mm (0.31”)1.4 mm (+0.7/-0.7)
0.055” (+0.027/-0.027)25 units
White NJ1PV50BL
Grey NJ1PV50GR
Beige NJ1PV50BE
Brown NJ1PV50MA
Black NJ1PV50NE
86
• Fractioning and expansion joint manufactured in co-extruded PVC, formed of one rigid PVC part that efficiently protects the paving borders, and another flexible PVC part that enables surface tensions to be absorbed.
• Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations.
• It is suitable for supporting all load types.
• Available in 5 colours: white, grey, beige, brown and black.
• Profiles supplied in standard lengths of 2.5 m (98.4”).
• If the floor will be polished, we recommend installing it slightly below the pavement level.
COLOCACIÓN NOVOJUNTA® 3 PVC
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • [email protected] ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • [email protected] EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• [email protected]
• For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).
• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
GENERAL RECOMMENDATIONS FOR INSTALLATION:
Novojunta® 3 PVC
HEIGHT PROFILE(h)
VISIBLE WIDTH(a)
EXPANSION Horizontal PACKAGING COLOUR REFERENCE
6 mm (0.23”) 8 mm (0.31”)1.4 mm (+0.7/-0.7)
0.055” (+0.027/-0.027)50 units
White NJ3PV06BL
Grey NJ3PV06GR
Beige NJ3PV06BE
Brown NJ3PV06MA
Black NJ3PV06NE
8 mm (0.31”) 8 mm (0.31”)1.4 mm (+0.7/-0.7)
0.055” (+0.027/-0.027)50 units
White NJ3PV08BL
Grey NJ3PV08GR
Beige NJ3PV08BE
Brown NJ3PV08MA
Black NJ3PV08NE
10 mm (0.39”) 8 mm (0.31”)1.4 mm (+0.7/-0.7)
0.055” (+0.027/-0.027)50 units
White NJ3PV10BL
Grey NJ3PV10GR
Beige NJ3PV10BE
Brown NJ3PV10MA
Black NJ3PV10NE
12.5 mm (0.49”) 8 mm (0.31”)1.4 mm (+0.7/-0.7)
0.055” (+0.027/-0.027)50 units
White NJ3PV12BL
Grey NJ3PV12GR
Beige NJ3PV12BE
Brown NJ3PV12MA
Black NJ3PV12NE
15 mm (0.59”) 8 mm (0.31”)1.4 mm (+0.7/-0.7)
0.055” (+0.027/-0.027)50 units
White NJ3PV15BL
Grey NJ3PV15GR
Beige NJ3PV15BE
Brown NJ3PV15MA
Black NJ3PV15NE
87