Programmable Display
GT SERIES
Programmable Controller
FP7 SERIES
AC Servo Motor
MINAS A6 Family
Programmable ControllersAC Servo MotorsDigest
Simple networkHigh-accuracy and
high cost performance
A6SE series
FP7series FP0Hseries
A6SG series A6SF series
Programmable Controller + Programmable Display + AC Servo MotorPr
ogra
mm
able
Con
trol
ler
Programmable display
RS-232C
Programmable controllers
Rotary motor
Special order product
Special order product
Driv
erA
C S
ervo
Mot
or
Pulse train position commandBlock operation position( control by external I/O )
Analog velocity control
Analog torque control
Modbus network(Block operation position control)
Basic type type typeRS-485 communication Multifunction
MSMFLow inertia
MQMFMiddle inertia/
Flat type
MHMFHigh inertia
MGMFMiddle inertia/
Low speed high torque
MDMFMiddle inertia
For more information, visit the website or please request to our distributors separately.
Network connection that flexibly and effectively fit into
2
A5M/A5MLseries
A5MN/A5MNLseries
A5MB/A5MBLseries
FP7seriesFP0Hseries FP-XHseries
A6NF seriesA6NE series
E series
A6BF seriesA6BE series
DIGEST
Ethernet
Programmable controllers Programmable controllers Programmable display
Rotary motor
Linear / DD motor Linear / DD motor
Rotary motorA6NL seriesA6NM series A6BM series
A6BL seriesSpecial order product
Special order product
* The photo is A6NM series. * The photo is A6BM series.
Special order product
Simple networkDistributed control
Open networkMulti axis control and
high speed
various system configurations
Standard type type typeMultifunction Standard Standard type type typeMultifunction Standard
Ultra-small design and pulse train command type only, DIN-rail mountable (using mounting Kit)
Rated output: 50 W to 400 W
DC 24 V / 48 V power supply support, ultra-compact motor and driver.
Rated output: Flange size □20 mm □0.787 in / 10 W Flange size □25 mm □0.984 in / 10 W, 20 W, 30 W
Slim design and position control type DC 24 V / 48 V type
s FP-XHseries
ogrammable controllers
3
Programmable controller FP7SERIES
EtherCAT CommunicationAC servo motors & driver
Motioncontrol unit
S-LINK V gateway controllerSL-VGU1-EC
S-LINK Vprotocol
Cylinder, Slider and Remote I/O, etc.
All types of sensorsS-LINK V I/O devices
CPU unit
PLC of each company
CommunicationunitSC-GU3-03
SeverTCP/IP
TM
HUB
PC
Automation Controls + InformationPanasonic PLCs also control information
FTP server function
FTP(S) client function (SSL-compatible)
HTTP(S) client function (SSL-compatible)
Compatible with industrial network Ethernet protocol
Motion control of up to 64axes in one unit
Monitor and control the FP7 without the use of custom software. Users can check the accumulated data in the FP7 with a browser.
Allows the PC to read the logging data in the FP7’s SD memory card and to write setting values and other parameters.
The FP7 supports EtherNet/IP and EtherCAT and provides an integrated system through the control of sensors and servo motors, etc., and data transmission with high-order servers.
* EtherNet/IP is a trademark of ODVA, Inc.* EtherCAT® is a registered trademark and patent-protected technology, licensed by Beckhoff Automation GmbH of Germany.
Panasonic servo motor 64 axes of MINAS A6Band 32 virtual axes. It is now easier to performmultiple axial control.
The FP7 can generate and write data files to an FTP server on a PC as well as read data files from the FTP server. The sessions use SSL, protecting IDs and passwords.
Transfer data from the FP7 to a web server for easy viewing with a browser.
Web server function
AFP7MC16ECAFP7MC32EC AFP7MC64EC
Programmable Controller + Programmable Display + AC Servo Motor
Operationspeed11 ns
Ethernet EtherCATMax. I/O8,192 points
Tool portUSB
Programcapacity
196 k stepsProgrammable controller FP7SERIES
Programmable Controller + Programmable Display +AC Servo Motor
Operationspeed11 ns
Max. I/O8,192 points
Programcapacity
196 k steps
EtherCAT CommunicationAC servo motors & driver
S-LINK V gateway controllerSL-VGU1-EC
S-LINK Vprotocol
Cylinder, Slider and Remote I/O, etc.
All types of sensorsAll types ofS-LINK V I/O devices
PLC of each company
CommunicationunitSC-GU3-03
TMT
HUB
FTP(
HTT
The FP7 caread data filpasswords.
Transfer dat
Motioncontrol unit
CPU unitSeverTCP/IP
HUB
PC
Automation ConPanasonic PLCs
FTP
Motiaxes
Monitor andcheck the a
Allows the Pwrite setting
ted ata
Panasonic sand 32 virtumultiple axia
Web
Motion
Compatible with industrial network Ethernet protocol
The FP7 supports EtherNet/IP and EtherCAT and provides an integratsystem through the control of sensors and servo motors, etc., and datransmission with high-order servers.
* EtherNet/IP is a trademark of ODVA, Inc.* EtherCATAA ® is a registered trademark and patent-protected technology,®
licensed by Beckhoff Automation GmbH of Germany.
Product name Standard program capacity
Max. program capacity
Operationspeed
Ethernetfunction (Note)
SD memory card function
Encryptionfunction Part No.
FP7CPU units
196 k steps 234 k steps From 11 ns Built-in Built-in − AFP7CPS41E
120 k steps 120 k steps From 11 ns Built-in Built-in − AFP7CPS31E
120 k steps 120 k steps From 11 ns − Built-in − AFP7CPS31
Security enhanced type
196 k steps 234 k steps From 11 ns Built-in Built-in Built-in AFP7CPS41ES
120 k steps 120 k steps From 11 ns Built-in Built-in Built-in AFP7CPS31ES
120 k steps 120 k steps From 11 ns − Built-in Built-in AFP7CPS31S
Best value model 64 k steps 64 k steps From 14 ns − − − AFP7CPS21Note: When using web server function, please purchase the Ethernet function built-in type. Ethernet is a registered trademark of Fuji Xerox Co., Ltd. and Xerox Corporation.
4
Programmable controller FP0HSERIES
Programmable controller FP-XHSERIES
RTEX(Realtime Express)
Built-in dual Ethernet ports
Outstanding real-time performance
~Multiple interfaces that connect with various devices~
2-axis gantry control together with interpolationcontrol enables smooth and highly accurate stagecontrol.
Preset cam operation synchronized with themain axis enables control of the rotation of theslave axis motor.
Y axis:Gantry X and Z axes: Arc and Linear interpolationsY axis:Gantry X and Z axes: Arc and
Y
XZ
▶ Control of gantry mechanism ▶ Control of cam mechanism
Electronic cam
Electronic gear Electronic clutchLinear interpolation
Spiral interpolation
Arc interpolation
Suitable for different applications
FP-XH M8N
PC
SDmemorycard
Ethernet
Ethernet
RS-232C
PLC, etc.
I/O Input: 16 points,Output : 16 points
High speed counter input 4 channelsPulse output / PWM output 4 channels
Touch panel,etc.
Communication cassetteRS-232C / RS-485
Dual port(Single IP address)
USB
+CPU 4axes
Hig
h sp
eed
coun
ter
4axes
Number of max. axes controlled:8 axesGeneral-purpose input: 8 pointsGeneral-purpose output: 8 pointsHigh speed counter: 4 channels
I/O
BEFORE: Additional unit for each function AFTER: Less costly single unit
Significantly improved basic performancein an ultra-compact body!
Connection to various devices
FTP server function FTP(S) client function (SSL-compatible)
All-in-one
Simpler wiring: cuts labor time for design and installation.
High speed network and high performanceservo bring synchronous control
DIGEST
Ethernet
RTEX
Operationspeed10 ns
Operationspeed40 ns
Max. I/O338 points
Max. I/O384 points
Tool portUSB
Programcapacity
64 k steps
Programcapacity
40 k steps
Motion command
Ethernet cable
Driver information feedback
Position (interpolation): Helical control
Synchronization: Gantry / Cam control
Command update period 1 ms
Ethernet base
CAT5e cable
Highly immune to noise
Frequency response: 3.2 kHz
Maximum speed: 6,500 r/min.
Max. pulse frequency: 4 Gpps Resolution: 23 bits
Easier with 8 axes wiring
High-speed operation processing
EtherNet/IP, Modbus-TCP and MC protocol compatibility*
Easy connection with all kinds of robots and PLCs*
Cassette system reduces unit cost and installation space*
The FP0H can generate and write data files to an FTP server on a PCas well as read data files from the FTP server.
Allows the PC to read the logging data in the FP0H’s SD memory card and to write setting values and other parameters.
* Only for Ethernet type
Basic instruction: 10 ns to (up to 10 k steps) High capacity Max. 64 k stepsProgram capacity: 64 k / 40 k / 32 k / 24 k steps variable
Data capacity: 12 k / 24 k / 32 k / 64 k steps variable
◎ Faster ◎ Higher capacity
▶ Reduce production costs ▶ Support multiple types
To improve productivity in an advanced small device!Food processing machine Packaging equipment Inspection equipment
8 x faster than conventional models!
2 x larger than conventional models!
General-purpose 16 inputs and outputs (Max. 338 points) High speed counter 4 channelsMotion control 8 axes
Compatible pulser Expandable via Ethernet communication Expandable analog input/outputSerial communication Max. 5 channels
Cutsyour costs
* FP-XH M8N control units are introduced to only limited countries.
Product name Number of I/O points
Ratedvoltage
Inputspecifi cations
Output specifi cations
Connectionmethod
SD memory card function Part No.
FP0Hcontrol units
WithoutEthernet Input:
16 pointsOutput:
16 points
24 V DC 24 V DC(Polarity + / - common)
NPN transistor output: 0.3 A / 0.1 A
MILconnector
−AFP0HC32T
PNP transistor output: 0.3 A AFP0HC32P
WithEthernet
NPN transistor output: 0.3 A / 0.1 A
Built-inAFP0HC32ET
PNP transistor output: 0.3 A AFP0HC32EP
5
Small, light, powerfuland speedy
AC servo motor and driver MINAS A6 Family
PANATERM set-up support software
*2: Incremental encoder
Communicationspeed
5 Mbps
*1: Middle and high inertia types only
Encoder23 bits
(8388608 Pulse / rotation)
Highest speed in the industry and high torque in a compact lightweight body
Enhanced position detecting resolution enablessmoother and more precise positioning.
Programmable Controller + Programmable Display + AC Servo Motor
Block operation imageServo ON
Operation block No. specification
Block No. 10
Execution
Block No. 11
Execution
Block No. 12
Execution
Block No. 100
Execution
Block No. 200
Execution
Block No. 255
Execution
Block No. 1
Execution
Block No. 2
Execution
Block No. 3
Execution
Servo-motorsMotor Business UnitAutomotive & Industrial Systems Company
3.543 in× H55 mm 2.165 in)
Motor Business UnitAutomAAAAAAAAuAAuuuttttttooooooommmmmmmmotive & In& In&&&&&& II& In&&&&&&&& IInn&&&&&&&&&&& InI& & & Innnnn&&&&& & II& Innnnnnn&& Innn Innnnndustrial Systems Co
Motors shorter thana business card
( )
New two-degree- of-freedom control
system
Built-in filters and adjusting functions
Block operation position control(Supports Modbus and
external I/O)
PANATERMSupport
Modbus Support(A6SF、A6SG Series)
Frequency response 3.2 kHz
Powered Upcompactdriver
Swifter, smarter andeasier to use
Max. speed6500 r/min
Fast( )A5 Family5000 r/min
Max. torqueApprox. 350 %
High( )A5 FamilyApprox. 300 %
Overall length675 mm
ShortA5 Family99.0 mm
Weight750 g
Light( )A5 Family
960 g
8388608 Pulse / rotation)
8 times higher resolution Improved(A5 Family 20 bits) (A5 Family 2.5 Mbps)
Low vibrations High speed and high precision
positioning
Multifunctional software for quick adjustment support
The PANATERM set-up support software, with many added features. The PANATERM assists users in setting parameters, monitoring control conditions, setup support, and
available personal computer, and connected to the MINAS A6 Family through the USB
Setup wizard
settings in each control mode step by step, including reading of default setting. In On-line condition, Input data related to each step can be monitored in real time.
1) Select the adjustment method 2) Load measurement
your needs
Fit gainThis function automatically searches the best suitable stiffness setting and mode and adjusts the gain once the target in-position range and setting time are set.
Block operation255 block patterns can
easy. Instruction is made to block number by Modbus or I/O signal.
Service life predictionThe service life prediction function considers the internal temperature for main components such as the fan and condenser. If the rated value is exceeded, an alarm is displayed. This approach prevents unexpected suspension of operation and allows for planning of
Note: The life span prediction value should be considered as a guide only.
*1
*1
*2
26.575 in
The fit gain function for settingTwo-degree-of-freedom control
MHMF type□60 mm □2.362 in 200 W
6
DIGEST
□180 □180
SeriesMSMF
Low inertiaMQMF
Middle inertia/ Flat type
MDMFMiddle inertia
MGMFMiddle inertia/
Low speed high torque
MHMFHigh inertia
Rated output
Rated rotational speed
Maximumrotational speed
Rated rotational speedMaximum
rotational speed
Rated rotational speedMaximum
rotational speed
Rated rotational speedMaximum
rotational speed
Rated rotational speedMaximum
rotational speed
Rated rotational speedMaximum
rotational speed
Rated rotational speedMaximum
rotational speed
50W
100W
3000 r/min
(6500 r/min)200
W3000 r/min
(6000 r/min)400
W
750W
3000 r/min
(6000 r/min)1.0kW
1.5kW
2.0kW
3000 r/min
(5000 r/min)
2000 r/min
(3000 r/min)
1500 r/min
(3000 r/min)
2000 r/min
(3000 r/min)3.0kW
4.0kW
5.0kW
7.5kW
1500 r/min
(3000 r/min)
1500 r/min
(3000 r/min)
11kW
15kW
1500 r/min
(2000 r/min)
22kW
□38
□38
□60
□60
□80
□80
□40
□40
□60
□60
□80
□80
□60
□80
□80
□100
□100
□100
□120
□130
□130
□180
□220
□220
□220
□130
□130
□130
□130
□180
□180
□180
□130
□130
□180
□180
□180
□180
□130
□130
□130
□180
□180
□180
□180
850w
1.3 kw
1.8 kw
2.4 kw
2.9 kw
4.4 kw
5.5 kw
<Table description>
Flange sq. dimension(unit: mm)
100 V specifi cations and 200 V specifi cations
200 V specifi cations
200 V specifi cations and 400 V specifi cations (400 V: Under development)
200 V specifi cations and 400 V specifi cations(Coming soon)
□38
( ) ( ) ( )( ) ( ) ( ) ( )
Motor line-up
* Battery-less absolute motor (Coming soon)* For more information, please see the web site and catalog.
7
Programmable Controller + Programmable Display + AC Servo Motor
Programmable display GT SERIESListing
Features
Environmentally-resistant Tough model
Superior visibility even in sunlightLong life LED backlight
Product name GT03M-E GT03T-E GT32M-E GT32T-E
Power supply 24 V DC 24 V DC 24 V DC 24 V DC
Screen size 3.5 inch 3.5 inch 5.7 inch 5.7 inch
Display type TFT monochrome LCD TFT color LCD TFT monochrome LCD TFT color LCD
Display color 2 colors (black / white) (16-gray scale) 4,096 colors 2 colors (black / white) (16-gray scale) 4,096 colors
Display
Resolution 320 (W) × 240 (H) 320 (W) × 240 (H) 320 (W) × 240 (H) 320 (W) × 240 (H)
Backlight White LED White LED White LED White LED
Displayable characters (Note)
768 characters 768 characters 768 characters 768 characters
Memory capacity(F-ROM)
6 Mbytes 12 Mbytes 12 Mbytes 12 Mbytes
Externalinterface
USB port Available (mini) Available (mini) Available Available
SD / SDHCmemory card
ー Available Available Available
Features
High image quality model General-purpose model
Outstanding image qualityBuilt-in Ethernet port
High-contrast monochrome LCDLED backlight, Three-color indication
Half-QVGA LCDLED backlight, Three-color indication
Product name GT703M / GT703G GT704M / GT704G GT02M / GT02G GT12M / GT12G
Power supply 5 V DC / 24 V DC 24 V DC 5 V DC / 24 V DC 24 V DC
Screen size 3.8 inch 4.6 inch 3.8 inch 4.6 inch
Display type TFT monochrome LCD TFT monochrome LCD TFT monochrome LCD TFT monochrome LCD
Display color 2 colors (black / white) (64-gray scale) 2 colors (black / white) (64-gray scale) 2 colors (black / white) 2 colors (black / white) (8-gray scale)
Display
Resolution 480 (W) × 192 (H) 640 (W) × 240 (H) 240 (W) × 96 (H) 320 (W) × 120 (H)
BacklightGT703M:3-color LED (white / pink / red)
GT703G:3-color LED (green / orange / red)
GT704M:3-color LED (white / pink / red) GT704G:3-color LED (green / orange / red)
GT02M:3-color LED (white / pink / red) GT02G:3-color LED (green / orange / red)
GT12M:3-color LED (white / pink / red) GT12G:3-color LED (green / orange / red)
Displayable characters (Note)
912 characters 1,536 characters 216 characters 384 characters
Memory capacity(F-ROM)
16 Mbytes 16 Mbytes 2 Mbytes 2 Mbytes
Externalinterface
USB port Available (mini) Available (mini) Available (mini) Available (mini)
SD / SDHCmemory card
Available Available AvailableAIG02MQ2*D and AIG02GQ2*D only
AvailableAIG12MQ1*D and AIG12GQ1*D only
Note: With the 10-dot font.
GT703M GT704M
GT703G GT704G
Programmable display line-up
GT02M
GT02G
GT12M
GT12G
8
4.6 inch3.5 inch 5.7 inch 7.0 inch
GT32M-R
GT32T-R
GT02
GT703M / GT703GGT05M / GT05GGT12
GT704M / GT704G
GT02L
GT32T-E
GT32M-E
GT707
GT03T-E
GT03M-E
GT05S
Choose by screen size
Cho
ose
by p
rice
The products “Tough model” with this mark provide high visibility display even in bright environments and are designedwith excellent environmental resistance.
Entry-levelmodel
High image quality
High image quality
Entry-levelmodel
Product types Choose what you are looking for by screen size and price.
DIGEST
Features
General-purpose model Entry-level model
QVGA LCDColor / monochrome display
High brightness, TFT LCDLong life LED backlight
7 inch, Long life LED backlight
65,536 colors TFT color LCD
Easily!
White LED backlight
Product name GT05M / GT05G GT05S GT32M-R GT32T-R GT707 GT02L
Power supply 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC 5 V DC
Screen size 3.5 inch 3.5 inch 5.7 inch 5.7 inch 7 inch widescreen 3.7 inch
Display type TFT monochrome LCD TFT color LCD TFT monochrome LCD TFT color LCD TFT color LCD STN monochrome LCD
Display color 2 colors (black / white) 4,096 colors 2 colors (black / white) (16-gray scale) 4,096 colors 65,536 colors 2 colors (black / white)
Display
Resolution 320 (W) × 240 (H) 320 (W) × 240 (H) 320 (W) × 240 (H) 320 (W) × 240 (H) 800 (W) × 480 (H) 160 (W) × 64 (H)
Backlight
GT05M:3-color LED (white / pink / red)
GT05G:3-color LED (green / orange / red)
White LED White LED White LED White LED White LED
Displayable characters (Note)
768 characters 768 characters 768 characters 768 characters 600 characters 96 characters
Memory capacity(F-ROM)
2 Mbytes 12 Mbytes 12 Mbytes 12 Mbytes 76 Mbytes 704 kbytes
Externalinterface
USB port Available Available Available Available Available (mini) Available (mini)
SD / SDHCmemory card
Available Available Available Available Available ー
Note: With the 10-dot font (For GT707: 32-dot font)
GT05M
GT05G
9
Programmable Controller + Programmable Display + AC Servo Motor
IoT solution
Simply connect FP7 to existing PLC. Start implementing IoT easily.
Existing PLCWeb screen
Connecting toEquipment
Connect tothe internet
Checkand
moveon PC / Mobile
Web server
Ethernet
MC protocol
EtherNet/IP
Modbus TCP
Sensor device
No Hub withtransition wiring
MINAS A6Family
Basic information Monitor position, speed, torque, driver part No., motor part No.
Error information Error code, error history
Status display Servo drive inside temperature, encoder inside temperature, deterioration diagnosis
Check the MINAS data on Web sever
Share data betweeneach controllerusing Ethernet.
Programmable controller
FP7
FP0H
Serial communicationModbus RTU
Internet
Publish existing PLC data using Web server (home page) built-in the FP7 Programmable controller. You can now easily view data of existing equipment without having to use cloud server, etc.
* Ethernet is a registered trademark of Fuji Xerox Co., Ltd. and Xerox Corporation in the U.S.
Sensor device
10
EnerVisualizeR
DIGEST
Enables your company to intuitively share
common understanding on your energy usage,
which helps you all unite to reduce energy
consumption.
Digsplay of energy-saving status on
"Digital Signage".
Gives totals, averages, graphs and tables of
collected raw data.
Client-server network: Perfect not only to
share data but also to individually create the
graphs, tables or customized reports.
System configurationSystem configuration
"Digital Signage" (General-purpose LCD)
Server environment
Client environment
* The LCD image here is for illustrative purpose.
* KW Watcher (Free Visualization Software) users can easily
expand thier existing system and install EnerVisualizeR.
Analysis
Display
RS-485RS-485Ethernet
RS-485 RS-485
HDMI or VGA
Eco-POWER METERKW9M-A
Remote I/Ounit
AC outdoorunit
USB Key
USB Key
DVD
Option
EnerVisualizeRData Logger
DLL
HDMI or VGA
Data Collection & Accumulation
Eco-POWER METERKW2M-A
Eco-POWER METERKW2G
ELC500Control Unit
"Digital Signage"
Data summary for sharing, and analysis
•
•
•
•
Present
Share & Analyze
Moni tor
Organize
Real-time monitoring and short-cycle graph
Customized reports
• Shows the real-time data of factory operation.
• Displays graphs of your choice even as short as
one second.
• Good analysis method of short-term operation
status, which helps you cut down energy waste
even further.
• Saves your time to record the collected data.
• Gives you easy to understand reports regularly:
daily, weekly or monthly.
• Freely designable layout in a Microsoft®Excel®
format.
"•
•
Present Moni tor R•
•
•
D•
•
Share & Analyze Organize C•
•
•
11
No. CE-PLCPOTMOTOR-8 November, 2018
Please contact ..........
Specifications are subject to change without notice.
©Panasonic Corporation 2018
Electromechanical Control Business Division
1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japanindustrial.panasonic.com/ac/e/
Programmable Controller + Programmable Display + AC Servo Motor DIGEST
SOFTWARE
Save time on programmingwith user-friendly software
Control FPWIN GR7
Sw
Configuration, editing programming, searching, monitoring, debugging,
security, etc. PLC programming demands a lot of time and effort.
Many programmers get hung up on trying out different configurations,
consulting the manual, and re-writing repetitive code blocks. The Control FPWIN GR7 programming software is designed to eliminate these
inefficiencies and minimize programming complexity.
Programmable Controller Programmable Controller
Programmable Controller Programmable Display
Control Web Creator
Control FPWIN Pro7
Terminal GTWIN Ver.3
Control FPWIN Pro is the Panasonic programming software developed according
to the international standard IEC 61131-3 (for Windows® XP / Vista / 7 / 8 / 10).
Control FPWIN Pro is the universal software for all Panasonic PLC’s Programs written in Control FPWIN Pro 6 or earlier versions will run with
Control FPWIN Pro 7 Programs are compatible across FP series PLCs, e.g. FP0R will run with
minor adjustments on (Sigma) and FP7 PLCs Control FPWIN Pro 7 offer the same flexible choice of editors and allow you
to select the programming language you are most familiar with.
Programming software ofPLC open certificationcorresponds to FP7.
* Windows, Windows XP, Vista , 7 , 8 and 10 are trademarks or registered trademarks of
Microsoft Corporation in the United States and other countries.
Search results and text string list windowEdit the screen while viewing device search results and text string list.
Screen edit windowUse drag and drop to create screen.
Part edit screenSwitch designs are also changed instantly. Just a single click can also change between switches and lamps.
ToolbarCommonly used functions can be executed with the single click of an icon.
Part library windowSelect library easily from dropdown menu. Verify ON / OFF status in the library window before pasting.
File manager windowMap format makes it easy to grasp the main and edit-in-progress screens. Switching to list or thumbnail format is possible. Display of all function trees such as configuration settings and logging can be switched using tabs.
Abundant Web part library
■ Same style of operation as the program display image creation tool■ Parts can be arranged by dragging and dropping.■ Detailed part settings are easy using properties.■ Parts don’t lose quality when enlarged or reduced, and you can color them as desired.■ Images can be pasted in.
This is a graphics creation tool that allows you to easily design Web
content that is published by the FP7 or ELC500. You can creatively
design content by arranging Web parts such as switches, lamps and
meters on the screen and then setting the properties. Your content will
be linked to information in the PLC without needing any knowledge of
HTML.
You are a Web content creator from now on.
Menu bar
Tool bar
Creation area
Web part property settings