4
A FRIEND FOR EVERY LIVESTOCK OWNER TO HELP YOU FEED THE HERD! PROGRAMMABLE LIVESTOCK FEEDERS
A friend for every livestock owner to help you feed the herd!
Programmable livestock Feeders
PROUDLY MADE IN THE U.S.A.
The Auto Easy Feeder is pro-grammable to feed your live-stock up to 80 times a day, if desired. You set the length of run time to determine the amount of feed dispensed. The Auto Easy Feeder can dispense different types and sizes of bulk feed, textured type feed and all cube sizes without any adjust-ment between types of feed. Feed is dispensed in troughs on both sides of the feeder for easy access for livestock.
The Auto Easy Feeder uses a 12 volt deep cycle battery which is recharged by a solar cell sys-tem. The programmable Auto Easy Feeder is American made and built to last. The feeder is built with heavy schedule 40 pipe, 3/16 steel, and 14 gauge steel on skids for easy moving and has a powder coated finish to stand up to the heat and cold.
For more information please contact us or go to our website.
our 4’ model holds approximately 1300 to 1700 lbs of feed depending on the type
of feed being dispensed.
our 8’ model holds approximately 2600 to 3400 lbs of feed depending on the type
of feed being dispensed.
our 16’ model holds approximately 5200 to 6800 lbs of feed depending on the type of feed being dispensed.
The Auto Easy Feeder is pro-grammable to feed your live-stock up to 80 times a day, if desired. You set the length of run time to determine the amount of feed dispensed. The Auto Easy Feeder can dispense different types and sizes of bulk feed, textured type feed and all cube sizes without any adjust-ment between types of feed. Feed is dispensed in troughs on both sides of the feeder for easy access for livestock.
The Auto Easy Feeder uses a 12 volt deep cycle battery which is recharged by a solar cell sys-tem. The programmable Auto Easy Feeder is American made and built to last. The feeder is built with heavy schedule 40 pipe, 3/16 steel, and 14 gauge steel on skids for easy moving and has a powder coated finish to stand up to the heat and cold.
For more information please contact us or go to our website.
our 4’ model holds approximately 1300 to 1700 lbs of feed depending on the type
of feed being dispensed.
our 8’ model holds approximately 2600 to 3400 lbs of feed depending on the type
of feed being dispensed.
our 16’ model holds approximately 5200 to 6800 lbs of feed depending on the type of feed being dispensed.
A friend for every livestock owner to help you feed the herd!
Programmable livestock Feeders
PROUDLY MADE IN THE U.S.A.
