Flindt Bollard Flindt Bollard The fixture emits an asymmetrical non glaring wide light directed downwards. The light creates an organic pattern on the surface where the bollard is mounted. Christian Flindt Christian Flindt Christian Flindt (1972-) graduated with an MAA and MDD from Aarhus School of Architecture in 2002. He then started his own design company in 2003. Here, he placed high emphasis on communication between people, and his focus on this area finds expression in his approach to re-evaluating furniture. Johanneskirketrappen Johanneskirketrappen Strandengen, Søndre Havn - Køge Strandengen, Søndre Havn - Køge Kyst Kyst Project name: Project name: / / Project type: Project type: / / 1/3 louispoulsen.com louispoulsen.com Design to Shape Light Design to Shape Light
Transcript
Flindt BollardFlindt Bollard
The fixture emits an asymmetrical non glaring wide lightdirected downwards. The light creates an organic pattern
on the surface where the bollard is mounted.
Christian FlindtChristian FlindtChristian Flindt (1972-) graduated with an MAA and MDD from Aarhus School of Architecture in 2002. Hethen started his own design company in 2003. Here, he placed high emphasis on communication betweenpeople, and his focus on this area finds expression in his approach to re-evaluating furniture.
The bollard is equipped with 2 pcs LED’s for maximizing the vertical light distribution. Delivered with integratedSurge Protection Devicee (SPD). The innovation of the LED technology is constant. The specifications mentionedare based on present technology.
MountingMounting
Terminal block position: In the top. Looping: Approved, max. 5x6mm². Driver position: In the top. Post f/in groundinstallation: H: 1700mm incl. fixture head, in ground part 600 or 900mm. Post w/anchorage unit: H: 1110/1410mmincl. fixture head, in ground anchorage unit 310mm. Post w/base plate for surface mounting: H 800/1100mm incl.fixture head. Post dia. Ø115mm.
FinishFinish
Aluminium coloured or corten coloured. Textured surface, powder coated.
Width x Height x Length (mm) | 115 x 800 x 115 Max 9.8 kg | 115 x 1100 x 115 Max 11.0 kg
ClassClass
Ingress protection IP65. Electric shock protection I w. ground, II w/o ground. IK10.
Specification notesSpecification notes
The LED driver is integrated in the fixture head. All LED efficiency information are measured as system power.
Light sourceLight source
LED 3000K 15W Lumen: 578
InformationInformation
The bollard is equipped with 2 pcs LED’s for maximizing the vertical light distribution. Delivered with integratedSurge Protection Devicee (SPD). The innovation of the LED technology is constant. The specifications mentionedare based on present technology.
![MTR Square Bollard LED [MTRQBL] selux · Light Engine BSMFL MTR Square Bollard LED Project: Type: Qty: ... MTR rings have a wall ... LOCK WASHER CONCRETE 3/8-16 ...](https://static.documents.pub/doc/80x56/5acba7967f8b9a27628b9018/mtr-square-bollard-led-mtrqbl-engine-bsmfl-mtr-square-bollard-led-project-type.jpg)
