+ All Categories
Home > Documents > Projects & Solutions Mini Guide - Antifoul Painting

Projects & Solutions Mini Guide - Antifoul Painting

Date post: 17-Mar-2016
Category:
Upload: sheridan-marine
View: 214 times
Download: 0 times
Share this document with a friend
Description:
A series of FREE Mini Guides for boating projects that run through the basic steps for the practical boat owner. This Mini Guide concentrates on Antifouling the boats bottom and how to prepare the hull for an excellent, long lasting finish.
Popular Tags:
2
Projects & Solutions SHERIDAN MARINE By River, By Road, By Mail... Order the Solutions 01491 652 085 Antifoul Painting Cleaning Prepare the boats bottom by removing mussels, algae and other foreign matter. A pressure wash and scrub with a Boat Bottom Cleaner will help. Boat Bottom Cleaner CM082 Preparing the line Scraping and clearing the calcium build up and scum from the antifoul line helps with the finish later. A Scraper and Calcium Cleaner should do the job. Underwater Primer Paint Apply Underwater Primer to visible gelcoat to ensure the antifoul adheres correctly and lasts longer. Antifoul will not adhere to bare gelcoat for long once back in the water! Underwater Primer BP031 Calcium Cleaner CM324
Transcript
Page 1: Projects & Solutions Mini Guide - Antifoul Painting

Projects &

Solutions SHERIDAN MARINEBy River, By Road, By Mail...

Order the Solutions

01491 652 085

Antifoul PaintingCleaningPrepare the boats bottom by removing mussels, algae and other foreign matter.

A pressure wash and scrub with a Boat Bottom Cleaner will help.

Boat Bottom CleanerCM082

Preparing the lineScraping and clearing the calcium build up and scum from the antifoul line helps with the finish later.

A Scraper and Calcium Cleaner should do the job.

Underwater Primer PaintApply Underwater Primer to visible gelcoat to ensure the antifoul adheres correctly and lasts longer.

Antifoul will not adhere to bare gelcoat for long once back in the water!

Underwater PrimerBP031

Calcium CleanerCM324

Page 2: Projects & Solutions Mini Guide - Antifoul Painting

Projects &

Solutions SHERIDAN MARINEBy River, By Road, By Mail...

Order the Solutions

01491 652 085

Antifoul PaintingAntifoul PaintChoose your Antifoul grade & colour, mask up for a neat edge, then paint!

Using an Extendable Roller, disposable Brush & Gloves limits paint splash back.

AccessoriesAdditional useful equipment for re-antifouling.

Masking Tape

CM017A

Boottop BP040A

Boot Top Line PaintAdding a boot top line in either Waterline Paint or Gloss Paint adds the classic look.

The harder boot top line can also withstand scrubbing during the season when cleaning.

GlovesCM857C

BrushPA166

RollersPA120

© Sheridan Marine 2014. All rights reserved. E&OE. This is a project guidance sheet and not a ‘How-to’ fact book. It is presumed that all work is carried out safely following the product man-ufacturers instructions. Each project may differ so may need further discussions and guidance.

Antifoul BP070A


Recommended