CORPORATION
430 South Navajo Street Denver, Colorado 80223Phone 303975-1402 Fax 303975-0981
Proof Load Test,Certificate,Certificate of Manufacture & Inspection
ComplianceMagnetic Particle Test Certificate
Edcon E. O. # 489Date: February 4, 2005Customer: EDCON POWER TONG P.O. CONRADDescription: CENTER LATCH ELEVATOR TYPE "TA" 100 TON FOR 4 %" CASPIN: 32384-129 Rev. 0 Serial # 05033
Load Tested at 150 TON for five MinutesThis certifies the item(s) described above has been proof load tested for a minimumof (5) minutes at one and one halftimes (1.5X) the safe working load in accordancewith API 7K. Loading monitored with instruments accurate + 1% Certificates on file.At conclusion of test no obvious defects were noticed.
Magnetic Particle Test:This also certifies that the above products supplied under the above order have beenMagnetic Particle tested to ASTM-E709&E125 and accepted to BVM Quality procedures.
Certificate of Manufacture: This is to certify that the above parts and or assembly weremanufactured, inspected and accepted in accordance with BVM Quality procedures,Specifications, A.P.I Q1I8C, 7K and Customer requirements.
This certification is valid for a period of 6 years, as per the recommendations provided bythe Canadian Association of Oilwell Drilling Contractors, or until the unit has beendamaged the unit has been damaged either as a result of operation, transportation, orhandling.Horns were cutoff at factory as per customer request.Ap ~ovedBy: