Date post: | 30-Jul-2018 |
Category: |
Documents |
Upload: | phungquynh |
View: | 216 times |
Download: | 0 times |
1 Girl's & Boy's Hostel 6579804.91 6501655.31
2 Extension of Dinning Hall 6101213.53 4359501.88
Total 12681018.44 10861157.19
3
Cost Index of 4.9% over schedule items as per DSR
2016 621369.90 0.00
Total after adding cost index 13302388.35 10861157.19
4
Add escallation of 4.5% per year to bring the DSR
2016 ratees to 2018 1197214.95 0.00
Total After adding escallation 14499603.30 10861157.19
TOTAL Tender cost in Rupees (A)
Differential cost against GST will be paid/recovered
over and above Total Tender cost (A) after recovering
MVAT which is included in above rates and other
input credits from applicable perentage of GST
We hereby quote our percentage overall , ABOVE
(+) / AT PAR / BELOW (-) on the TOTAL Tender
cost (A)
Percentage in words
Signature/ seal of the company
PROPOSED DEVELOPMENT FOR
TATA INSTITUTE OF SOCIAL SCIENCES
AT TULJAPUR
QUOTE SHEET
CONSTRUCTION OF HOSTEL AND EXTENSION OF DINNING HALL
Sr No Description
Amount of
Schedule
Item as per
DSR 2016
(Rs)
Amount of Non-
Schedule Item
(Rs)
25360760.49
I CIVIL WORK:
A Excavation 14,935 22,688
B PCC and RCC Work 452,323 -
C Masonry - 68,750
D Plaster 72,913 56,719
E Flooring, Skirting and Dado 73,617 -
F Doors and Windows 730,075 58,563
G Waterproofing 989,125 74,766
H Painting 107,858 -
J Structural Steel 53,607 278,438
K Miscellaneous 20,679 2,383,467
Total: Civil Works 2,515,130 2,943,389
II ROAD WORK: 2,726,856 -
III PLUMBING WORK 599,200 1,303,706
IV ELECTRICAL WORK
A Wiring 240,463
B Lighting fixtures 639,500 639,500
C Panels DB & Miscellaneous - 202,000
D Cable earthing & miscellaneous 80,577 574,600
E TV, Telephone Data system 147,010 236,800
F IT work (HUB & SERVER) 270,570 460,160
G PA cum Music system work - 141,500
Total of electrical work 1,378,120 2,254,560
V TOTAL of hostel work 7,219,305 6,501,655
PROPOSED DEVELOPMENT FOR
TATA INSTITUTE OF SOCIAL SCIENCES
AT TULJAPUR
SUMMARY
BOYS' AND GIRLS' HOSTEL
Sr No Description
Amount of
Schedule
Item as per
DSR 2016
(Rs)
Amount of Non-
Schedule Item
I CIVIL WORK:
A Excavation 134,700 105,188
B PCC and RCC Work 1,204,799 -
C Masonry 68,804 68,750
D Plaster 379,145 226,875
E Flooring, Skirting and Dado 1,169,075 -
F Doors and Windows 866,307 145,063
G Waterproofing 827,720 124,008
H Painting 185,209 -
J Structural Steel 53,607 278,438
K Miscellaneous 12,533 479,686
Total: Civil Works 4,901,897 1,428,006
II ROAD WORK: 98,615 -
III PLUMBING WORK 383,315 1,580,886
IV ELECTRICAL WORK
A Wiring 406,696
B Lighting fixtures - 273,000
C Panels DB & Miscellaneous - 47,000
D Cable earthing & miscellaneous 32,515 350,050
E TV, Telephone Data system 7,605 78,900
F IT work (HUB & SERVER) 270,570 460,160
G PA cum Music system work - 141,500
Total of electrical work 717,386 1,350,610
V TOTAL of Dinning Hall 6,101,214 4,359,502
PROPOSED DEVELOPMENT FOR
TATA INSTITUTE OF SOCIAL SCIENCES
AT TULJAPUR
SUMMARY
EXTENSION OF DINNING HALL
Sr No Description
Amount of
Schedule
Item as per
DSR 2016
Amount of Non-
Schedule Item
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
I CIVIL WORK:
A EXCAVATION
Schedule Items:
1.00 2.60 Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means over areas
(exceeding 30cm in depth. 1.5 m in width as well as
10 sqm on plan) including disposal of excavated
earth, lead upto 50m and lift upto 1.5m, disposed
earth to be leveled and neatly dressed.
2.6.1 All kinds of soil 40 125.95 Cum 5,038
2.00 2.11 Extra for excavating in all kinds of soil for depth
exceeding 1.5 m, but not exceeding 3 m. (Rate is
over corresponding basic item for depth upto 1.5
meter). 25 285.91 Cum 7,148
3.00 2.70 Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means over areas
(exceeding 30 cm in depth, 1.5 m in width as well as
10 sqm on plan) including disposal of excavated
earth, lead upto 50 m and lift upto 1.5 m, as directed
by Engineering-in-charge.
2.7.1 Ordinary Rock 0 221.05 Cum -
4.00 2.14 Extra for excavating in ordinary rocks for depth
exceeding 1.5 m, but not exceeding 3 m. (Rate is
over corresponding basic item for depth upto 1.5
meter).0 448.73 Cum -
5.00 2.7.3 Hard rock (blasting prohibited) 0 619.80 Cum -
6.00 2.14 Extra for excavating in hard rocks for depth
exceeding 1.5 m, but not exceeding 3 m. (Rate is
over corresponding basic item for depth upto 1.5
meter).0 1258.19 Cum -
7.00 2.25 Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not
exceeding 20cm in depth, consolidating each
deposited layer by ramming and watering, lead
up to 50 m and lift upto 1.5 m. 10 125.75 Cum 1,258
8.00 4.11 Providing and laying damp-proof course 50 mm thick
with cement concrete 1:2:4 (1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size).0 320.25 SM -
PROPOSED DEVELOPMENT FOR
TATA INSTITUTE OF SOCIAL SCIENCES
AT TULJAPUR
BOYS' AND GIRLS' HOSTELCIVIL WORK
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
9.00 1.1.2 Carting away excavated material outside premises
wherever directed. 5 km 10 149.17 Cum 1,492
Total: Schedule Items: 14,935
Non-Schedule Items:
10 NS Providing and filling murum in plinth with approved
murum, spreading in layers of 150 mm to 200 mm
thickness watering, ramming, consolidated etc
complete as specified and directed. 10 721.88 Cum 7,219
11.00 NS Providing and laying 150/200 mm thick soling by hand
broken oversized metal including thorough
compacting, watering etc complete as specified and
directed. 10 1546.88 Cum 15,469
12.00 NS Providing and laying pre-construction antitermite
treatment by approved agency with ISI specifications
with ten years guarantee as directed. (Payment will
be made for plinth area only). 0 92.81 SM -
Total: Non-Schedule Items: 22,688
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
B PLAIN AND REINFORCED CONCRETE WORK:
Notes:
i Concrete has been specified by design and / or
nominal mixes and shall have cube crushing
strengths as laid down by the ISI codes
ii All R. C work shall be executed strictly in accordance
with the instruction, drawings and
details of the Architect / Consulting Engineer and at
all heights, depth and locations
iii The rates for R. C. items shall include for labour,
materials, dewatering, formwork, machinery
equipment, tools scaffolding, walkways, working
platform etc at all levels, heights and
locations and all the operations involved but shall
excludes MS reinforcement / torsteel which
shall be measured and paid for separately.
Necessary provision will be made in the formwork
for embedding electrical conduits by electrical
contractor and other inserts etc as required and
directed.
iv All M. S. reinforcement / torsteel shall be measured
on the quantity actually going into the job
according to the drawing, details. The rates shall
allow for al wastage and rolling margin and
binding wire, chairs, separators etc, which shall not
be paid for separately. Only authorised
labs shall be paid consultant's drawings and
instructions.
v All concrete shall be machine mixed and vibrated.
vi For all thin members like parapets, fins, special
boxes, thin precast units, flower beds, ducts
ledges or beam and slabs, all beams with narrow
width and in members similar to them the
metal used shall be 12 mm below in size and well
graded. In portion of members where
reinforcement is crowded, the same type of metal
shall be used. The rate against
items allow for this.
vii The rate shall allow for champers, grooves lines in R.
C. members as well as necessary
slopes and drops, drip moulds etc as required and
directed.
viii The rate shall be for unfinished R. C. work only,
unless otherwise specified.
ix Bar bending schedule shall be prepared by the
contractor for the approval of Consulting
Engineer, before execution of work.
x The rate shall include necessary holes, pockets, etc
and grouting the same later on with
cement mortar 1:1 as required and directed.
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
xi All shuttering materials, supports joinery etc shall be
approved before concreting by
Consulting Engineer / Architect / Employer.
xii All exposed surfaces of concrete may or may not be
plastered at the discretion of the
Architect / Employer. However all the shuttering
marks or honeycomb shall be rendered
smooth with neat cement or rich cement mortar as
directed.
xiii Contractor will get mixed design from approved
laboratory and in consultations with RCC `
consultant, at no extra cost. This shall be done as
and when required and directed. If
instructed the contractor will use weigh batching for
design mix concreting. Depending upon
the circumstances, contractor may be permitted to
convert design mix into volumetric to
be approved by consultant.
xiv As and when required and directed by the Architect /
Consulting Engineer / Employer the
contractor may be required to wash and screen sand /
coarse aggregates at no extra cost.
xv For basement raft and walls sulfate resistant cement
shall be used with minimum cement
content of 310 kg. /Cum. And maximum water cement
ratio 0.5
xvi For any design mix the minimum cement contents will
be 310 kg /cum.
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
B PLAIN AND REINFORCED CONCRETE WORK:
Schedule Items:
1.00 4.1.8 Providing and laying in position cement concrete of
specified grade excluding the cost of centering and
shuttering - All work up to plinth level : PCC 1:4:8 (1
Cement : 4 coarse sand : 8 graded stone aggregate
40mm nominal size)
a. For foundation, floor bedding 25 4,478.15 Cum 111,954
2.00 5.1.2 Providing and laying in position specified grade of
reinforced cement concrete, excluding the cost of
centering, shuttering, finishing and excluding
reinforcement All work up to plinth level : 1:1.5:3 (1
cement : 1.5 coarse sand : 3 graded stone aggregate
20 mm nominal size) M250
a. Footing, Raft, Plinth Beam, Foundation Column 10 6,215.35 Cum 62,154
3.00 5.2.2 Providing and laying in position specified grade of
Reinforced cement concrete work in walls (any
thickness), including attached pilasters, buttresses,
plinth and string courses, fillets, columns, pillars,
piers, abutments, posts and struts etc. up to floor five
level, excluding cost of centering, shuttering, finishing
and excluding reinforcement : M250
a. SS Column, Walls 10 7,145.80 Cum 71,458
4.00 5.30 Providing and laying in position specified grade of
Reinforced cement concrete work in beams,
suspended floors, roofs having slope up to 15°
landings, balconies, shelves, chajjas, lintels, bands,
plain window sills, staircases and spiral stair cases up
to floor five level, excluding the cost of centering,
shuttering, finishing and excluding reinforcement, with
1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size). M250
a. FB, LB, RB, St.Case, Slabs, Chajjas, etc 10 7,390.80 Cum 73,908
5.00 5.90 Centering and shuttering including strutting, propping
etc. and removal of form for :
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
5.9.1 a. Foundations, footings, bases of columns, etc. for
mass concrete 10 193.95 SM 1,940
5.9.2 b. Walls (any thickness) including attached pilasters,
buttresses, plinth and string courses etc. 10 378.60 SM 3,786
5.9.3 c. Suspended floors, roofs, landings, balconies and
access platform 10 422.30 SM 4,223
5.9.5 d. Lintels, beams, plinth beams, girders, bressumers
and cantilevers 10 342.90 SM 3,429
5.9.6 e. Columns, Pillars, Piers, Abutments, Posts and
Struts 10 467.85 SM 4,679
5.9.7 f. Stairs, (excluding landings) except spiral-staircases
10 419.35 SM 4,194
6.00 5.22.1 Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position and 2 55,300 MT 110,600
Total: Schedule Items: 452,323
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
C MASONRY:
Schedule Items:
1.00 6.1.2 Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in foundation
and plinth in: Cement mortar 1:6 (1 cement : 6 coarse
sand) 0 4,751.65 Cum -
2.00 6.3.1 Full brick work with common burnt clay machine
moulded perforated bricks of class designation 12.5
conforming to IS: 2222 in uperstructure above plinth
level up to floor five level in cement mortar 1:6 (1
cement : 6 coarse sand) : With F.P.S.(non modular)
bricks 0 1,297.25 SM -
3.00 6.13 Half brick masonry with common burnt clay F.P.S.
(non modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse sand) 0 684.20 SM -
Total: Schedule Items: -
Non-Schedule Items:
4.00 NS
Providing and laying approved conventional ground
fly ash bricks with crushing strength of not less than
35 Kg/Sq.Cm in standard size of 230 x 100 x75 mm
in walls, in supper structure, piers in 1:5 cement
mortar.
a. 230 mm thick 25 1,350.00 SM 33,750.00
b. 115 mm thick 50.00 700.00 SM 35,000.00
Total: Non-Schedule Items: 68,750
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
D PLASTER:
Notes:
The quoted rates shall include:
i Hacking and bush hammering to form key for plaster
and raking out joints
ii Provision of drip mould, rounding or chamfering
edges, grooves and also work of small nature, narrow
widths etc at any level
iii Putting up samples of required finishes in panels for
approval of the Engineer - in charge/ Architect.
iv Finishing the opening of electric switch socket outlet,
fittings, boxes etc to match the surroundings and
making good recess for electrical conduits, plumbing,
piping etc with chicken wire mesh wherever directed.
v Provision of double scaffolding, ladders, curing
networking at all heights and floors
vi Cost of supplying and fixing chicken wire mesh (24
SWG) of width not less than 125 mm at junction of
concrete with bricks work or block work wherever
required and as directed and on recesses for
electrical conduits, plumbing pipes etc complete.
vii One coat of white wash immediately apply after
curing of plaster for seven days is over.
viii Sand for the plastering shall be exclusively river sand.
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
D PLASTER:
Schedule Items:
1.00 13.1.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine
sand) 250 172.95 SM 43,238
2.00 13.26 Providing and applying plaster of Paris putty of 2 mm
thickness over plastered surface to prepare the
surface even and smooth complete. 250 118.70 SM 29,675
Total: Schedule Items: 72,913
Non-Schedule Items:
3.00 NS Providing sand face plaster externally using approved
screened sand in all positions including base coat of
15 mm thick in 1:4 cement mortar using waterproofing
compound at the rate of 1 kg per bag and curing the
same for not less than two days and keeping the
surface of base coat rough to received the sand
faced treatment 6 to 8 mm thick in 1:4 cement mortar
finishing the surface by taking out grains and curing
for 14 days including scaffolding etc complete.
100 567.19 SM 56,719
Total: Non-Schedule Items: 56,719
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
E FLOORING, SKIRTING AND DADO:
Schedule Items:
1.00 11.41.1 Providing and laying vitrified floor tiles in different
sizes (thickness to be specified by the manufacturer)
with water absorption less than 0.08% and
conforming to IS : 15622, of approved make, in all
colours and shades, laid on 20mm thick cement
mortar 1:4 (1 cement : 4 coarse sand), including
grouting the joints with white cement and matching
pigments etc., complete. Size of Tile 500x500 mm 10 988.45 SM 9,885
2.00 11.46.1 Providing and laying Vitrified tiles in different sizes
(thickness to be specified by manufacturer), with
water absorption less than 0.08 % and conforming to
I.S. 15622, of approved make, in all colours & shade,
in skirting, dado, riser of steps, over 12 mm thick bed
of cement mortar 1:3 (1 cement: 3 coarse sand),
including grouting the joint with white cement &
matching pigments etc. complete. Size of Tile
500x500 mm 10 1004.25 SM 10,043
3.00 8.12.1 Providing and laying flamed finish Granite stone
flooring in required design and patterns, in linear as
well as curvilinear portions of the building all complete
as per the architectural drawings with 18 mm thick
stone slab over 20 mm (average) thick base of
cement mortar 1:4 (1 cement : 4 coarse sand) laid
and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching
shade including rubbing, curing and polishing etc. all
complete as specified and as directed by the
Engineer in-Charge : a. Flamed finish granite stone
slab Jet Black, Cherry Red, Elite Brown, Cat Eye or
equivalent. 10 2887.85 SM 28,879
5.00 11.26 Kota stone slab flooring over 20 mm (average) thick
base laid over and jointed with grey cement slurry
mixed with pigment to match the shade of the slab,
including rubbing and polishing complete with base of
cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25
mm thick 10 1158.10 SM 11,581
5.00 11.27 Kota stone slabs 20 mm thick in risers of steps,
skirting, dado and pillars laid on 12 mm (average)
thick cement mortar 1:3 (1 cement: 3 coarse sand)
and jointed with grey cement slurry mixed with
pigment to match the shade of the slabs, including
rubbing and polishing complete. 10 1238.20 SM 12,382
6.00 11.31 Extra for pre finished bull nozing in treads of steps of
Kota stone 10 84.85 Rmt 849
Total: Schedule Items: 73,617
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
F DOORS AND WINDOWS:
Notes:
i Unless otherwise specified timber for wood work shall
be good quality, well seasoned C.P.
teak wood free from all defects, knowts, sapwood etc
and shall be got approved from the
Engineer before fixing or applying primer coat.
ii Teak particle boards and resin bonded block boards
or any other wood base board shall be
bonded with phenol formaldehyde synthetic resin and
shall have veneer as specified in the
concerned item. This should be approved brand.
iii The rates quoted shall include
iiia Unless otherwise specified, painting all wood work
with three coats of approved quality and
shade synthetic enamel paint as directed, over a coat
of approved wood primer, including
preparations of the surface to get a uniform and
smooth finish. Timber faces coming in
contract with masonry / concrete shall be painted with
three coats of approved wood
preservative and anitermite paint before fixing in
position. The paint could be glossy or
matt finish as directed.
iiib Providing and fixing glass panels wherever specified
of approved make and thickness with
necessary teak wood beading as per specifications.
The thickness of glass panels
should be as per the tender provision but not less
than 4 mm thick.
iiic Providing and fixing necessary holdfasts and
embedding them in C. C. 1:2:4 or dash
fasteners as required. The holdfasts should be 30 cm
in length made from 40mm x 6 mm
MS flats with fish tail ends embedded in C. C. 1:2:4
concrete of 35 cms x 15 cms for doors.
There should be 6 Nos. such holdfasts for doors and
for windows 4 Nos. For fixing on columns
/concrete, dash fasteners of approved size and
numbers should be used as per directions.
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
iiid Making champers, grooves, moulded surfaces cover
moulds etc
iiie Architraves made out of 1 1/2" x 3/4" as per design.
iv Unless otherwise stated the rates quoted shall also
include fixing of all hardware fitting and
fixtures (including screws) heavy quality hinges,
pivots, aldrops, tower bolts, hasp and staples
hooks and yes, handles, door stoppers, door closers,
peepholes, letter slots, lettering
numerical on entrance door, high latch, safety chain
knobs, mortise locks, floor spring etc
as required and directed.
v Flush shutters should be ISI approved BWP grade
and shall have teak wood lipping of
required thickness as per drawing and as directed.
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
F DOORS AND WINDOWS:
Schedule Items:
1.00 9.1.1 Providing wood work in frames of doors, windows,
clerestory windows and other frames, wrought framed
and fixed in position with hold fast lugs or with dash
fasteners of required dia & length ( hold fast lugs or
dash fastener shall be paid for separately). Second
class teak wood 4 92743 Cum 370,972
2.00 9.122.1 P/F 30mm thk Fiberglass Reinforced Plastic (FRP)
panelled door shutter of required colour and approved
brand. made with fire resistant grade ubsaturated
polyester resin mouded to 3mm thk FRP laminate for
forming hollow rail & styles , with wooden frames and
suitable blocks of seasoned wood inside at required
places for fixing fittings, cast monolithically with 5mm
thk FRP laminate for panels confirming to IS 14856-
2000 including fixing in frames.
75 2187.35 Sqm 164,051
3.00 9.20.1 Providing & fixing 35mm thk ISI marked flush door
shutters confirming to IS:2202 (Part I) decorative type
, core of blockboard construction with frame of first
class hard wood and well matched teak 3 ply
vineering/lamiate of approved make on both faces of
shutters with stainless steel butt hinges 30 2488.95 Sqm 74,669
4.00 9.50 Providing & fixing pannelled & glazed shutter for
doors window and clerestory windows including
Brass/ stainless steel hingeswith necessary screws
excluding panelling which shall be paid separately -
9.5.1.1 35mm second class teak wood shutters 25 2650.00 Sqm 66,250
5.00 21.10 Providing & fixing aluminium work for doors, windows,
ventilators and partitions with extruded built up
standard tubular sections and other sections of
approved make confirming to IS :733 and IS:1285
fixed with rawl plug and screws or with fixing clips
including necessary filling up of gaps at junctions , at
top, bottom & sides with EPDM rubber/ neoprene
gasket etc. Aluminium sections shall be smooth , rust
free, straight, mitered and joined mechanically
wherever required including cleat angle.Aluminium
snap bidding for glazing, panelling, C. P. ,brass
stainless steel screws. All complete as per architect's
drawing and direction of engineer-in-charge -
21.1.1.1 Anodised aluminium (anodised transparent or dyed to
required shade according to IS 1868 Minimum anodic
coating of grade AC 15) 35 355.20 kg 12,432
6.00 21/01/02 For shutters of doors, windows & ventilators including
providing & fixing hinges/pivot and making provisions
for fixing of fittings wherever required including cost
of EPDM rubber/neoprene gasket required
-
21.1,2.1 Anodised aluminium (anodised transparent or dyed to
required shade according to IS 1868 Minimum anodic
coating of grade AC 15) 40 415.05 Kg 16,602
7.00 21.30 Providing and fixing glazing in aluminium door,
window ventilator shutter and partitions etc. -
02/03/02 With float glass panes of 5.5mm thickness 25 1003.95 Sqm 25,099
Total: Schedule Items: 730,075
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
Non-Schedule Items:
8.00 NS Providing & fixing heavy brass handles , tower bolt ,
eldrop of approved make to flush shutters/panelled
shutter 30 950 SM 28,500
9.00 NS Providing and fixing with approved 1.5 mm thick
laminates on both faces etc complete and as directed
and as per drawing. 10 1856 SM 18,563
-
10.00 NS Providing & fixing stainless steel mosquito net in one
of panel of aluminium window 5 1100 Sqm 5,500
-
11.00 NS Providing concealed lock and handles of approved
shade in aluminium windows 20 300 Sqm 6,000
Total:Non Schedule Items: 58,563
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
G WATERPROOFING:
Schedule Items:
1.00 22.7.1 Providing and laying integral cement based water
proofing treatment including preparation of surface as
required for treatment of roofs, balconies, terraces etc
consisting of following operations: a) Applying a slurry
coat of neat cement using 2.75 kg/sqm of cement
admixed with water proofing compound conforming to
IS. 2645 and approved by Engineer-in-charge over
the RCC slab including adjoining walls upto 300 mm
height including cleaning the surface before
treatment. b) Laying brick bats with mortar using
broken bricks/brick bats 25 mm to 115 mm size with
50% of cement mortar 1:5 (1 cement : 5 coarse sand)
admixed with water proofing compound conforming to
IS : 2645 and approved by Engineer -in-charge over
20 mm thick layer of cement mortar of mix 1:5 (1
cement :5 coarse sand ) admixed with water proofing
compound conforming to IS : 2645 and approved by
Engineer-in-charge to required slope and treating
similarly the adjoining walls upto 300 mm height
including rounding of jns of walls and slabs.C)After.....
c) After two days of proper curing applying a second
coat of cement slurry using 2.75 kg/ sqm of cement
admixed joint less cement mortar of mix 1:4 (1
cement :4 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by
Engineer-in-charge including laying glass fibre cloth
of approved quality in top layer of plaster and finally
finishing the surface with trowel with neat cement
slurry and making pattern of 300x300 mm square 3
mm deep. e) The whole terrace so finished shall be
flooded with water for a minimum period of two weeks
for curing and for final test. All above operations to be
done in order and as directed and specified by the
Engineer in- Charge : With average thickness of 120
mm and minimum thickness at khurra as 65 mm. 956 1034.65 SM 989,125
Total: Schedule Items: 989,125
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
Non-Schedule Items:
2.00 NS Providing and laying patented waterproof cement
plaster of 20 mm thick for toilets/bathroom floors,
finished rough with ten years guarantee as per
approved agencies specifications and as directed as
per drawing. 10 773 SM 7,734
3.00 NS Do -- same with 12 mm thick waterproof cement
plaster for walls in toilets/bath etc with rough surface
to received tiles 10 516 SM 5,156
4.00 NS Providing and laying brick bat coba with patented
waterproofing in toilets, w.c. slabs (Over waterproof
plaster) finished on top with waterproof plaster with
rough surface to received flooring tiles above, as per
agencies specifications and as directed 10 6188 Cum 61,875
Total: Non-Schedule Items: 74,766
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
H PAINTING:
Schedule Items:
1.00 13.85.3 Applying priming coats with primer of approved brand
and manufacture, having low VOC (Volatile Organic
Compound ) content. With water thinnable cement
primer on wall surface having VOC content less than
50 grams/litre 10 36.95 SM 370
2.00 13.83.2 Wall painting with premium acrylic emulsion paint of
interior grade, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre of
approved brand and manufacture, including applying
additional coats wherever required to achieve even
shade and colour: 2 Coats. 10 71.00 SM 710
3.00 13.62.1 Painting with synthetic enamel paint of approved
brand and manufacture of required colour to give an
even shade : Two or more coats on new work over
an under coat of suitable shade with ordinary paint of
approved brand and manufacture 10 112.30 SM 1,123
4.00 13.46.1 Finishing walls with Acrylic Smooth exterior paint of
required shade : New work (Two or more coat applied
@ 1.67 ltr/10 sqm over
and including priming coat of exterior primer applied
@ 2.20 kg/ 10 sqm) 1100 96.05 SM 105,655
Total: Schedule Items: 107,858
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
J STRUCTURAL STEEL:
Schedule Items:
1.00 10.30 Providing and fixing in position collapsible steel
shutters with vertical channels 20x10x2 mm and
braced with flat iron diagonals 20x5 mm size, with top
and bottom rail of T-iron 40x40x6 mm, with 40 mm dia
steel pulleys, complete with bolts, nuts, locking
arrangement, stoppers, handles, including applying a
priming coat of approved steel primer. 10 5361 SM 53,607
Total: Schedule Items: 53,607
Non-Schedule Items:
2.00 NS Providing and fixing m.s. grill / m.s. railing as per
architectural drawing. Applying two coats of
approved chlorinated rubber paint over a coat of red
oxide primer. 225 1238 RM 278,438
Total: Non-Schedule Items: 278,438
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
K MISCELLANEOUS:
Schedule Items:
1.00 5.18.1 Providing precast cement concrete Jali 1:2:4 (1
cement : 2 coarse sand: 4 graded stone aggregate 6
mm nominal size), reinforced with 1.6 mm dia mild
steel wire, including centering and shuttering,
roughening cleaning, fixing and finishing in cement
mortar 1:3 (1 cement: 3 fine sand) etc. complete,
excluding plastering of the jambs, sills and soffits. : 50
mm thick 10 814.55 SM 8,146
2.00 22.2.1 Providing and laying integral cement based treatment
for water proofing on the vertical surface by fixing
specified stone slab 22 mm to 25 mm thick with
cement slurry mixed with water proofing compound
conforming to IS:2645 in recommended proportions
with a gap of 20 mm (minimum) between stone slabs
and the receiving surfaces and filling the gaps with
neat cement slurry mixed with water proofing
compound and finishing the exterior of stone slab with
cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm
thick with neat cement punning mixed with water
proofing
compound in recommended proportion complete at all
levels and as directed by Engineer-in-charge : Using
rough Kota stone
b. For walls & raft 10 1253.30 SM 12,533
Total: Schedule Items: 20,679
Non-Schedule Items:
3.00 NS Providing and fixing of specified width, kitchen
platform in granite of approved quality and colour
over cudappa slab supported by sandwiched
cudappa shelves, and granite facia all as per drawing
and as directed. Rate to include approved S. S. sink
size 2'-00 x 2'-00
Note: Ceramic tiles, dado above and below kitchen
platform will be paid separately as per tender item
a. Kitchen platform 450 mm wide 10 4538 RM 45,375
4.00 NS Providing and fixing t.w. hand rail 75 x 60 mm fixed
on RCC pardi as per architectural drawings and
details 10 1031 RM 10,313
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
5.00 NS Constructing over head / Underground water tank
with RCC walls, slabs, beams, etc including M. S.
reinforcement in M-250 grade concrete centering
finishing all inside. Surface with India Waterproofing
Treatment (with guarantee for 10 years) outside
surfaces plastered with sand faced cement plaster in
CM 1:4 with waterproof compound inlet, outlet GI
pipes mosquito proof manhole covers with frames
inter connecting GI pipes with plugs GI overflow pipes
with plugs bends etc vent pipes controlling valves,
ball valve with polyurethene floats. MS ladder
properly fixed at both ends etc complete and as
directed. 0 15.47 LIT -
6.00 NS Providing and supplying heavy duty injection
adhesive for rebar / Anchor Fastener fixing in
Wet/Dry conditions HILTI HIT-RE 500 for following
diameters of HILTI India Pvt Ltd. The system should
be made of two foils consisting of resin and Hardener
foil pack.The system can be used for rebar fixing or
threaded rods viz HAS-E rods. The installation and
the setting instructions should be strictly followed as
per the manufacturers recommendations. (Rate shall
be inclusive of required all Threaded rods,
reinforcements steel etc).
Hilty 08 mm dia. 10 186 Each 1,856
Hilty 10 mm dia. 10 211 Each 2,114
Hilty 12 mm dia. 10 237 Each 2,372
Hilty 16 mm dia. 10 289 Each 2,888
Hilty 20 mm dia. 10 330 Each 3,300
4.00 NS Shera light weight roof sheets
Providing and fixing SHERA brand or equivalent light
weight roof sheet over chajjas top and facia of
approved colour / design including cutting, hoisting
and leakproofing of top surface, wastages, etc
complate as specified and directed. The joints to be
filled with matching pigment. 2205 1050 SM 2,315,250
Total: Non-Schedule Items: 2,383,467
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
II ROAD WORK:
Asphalt Road:
Schedule Items:
1.00 16.10 Preparation and consolidation of sub grade with
power road roller of 8 to 12 tone capacity after
excavating earth to an average of 40 cm depth,
dressing to camber and consolidating with road roller
including making good the undulations etc. and re-
rolling the sub grade and disposal of surplus earth
with lead upto 50 meters. 1100 180.20 SM 198,220
2.00 16.3.1 Supplying and stacking at site, 90 mm to 45 mm size
stone aggregate 200 1336.05 Cum 267,210
3.00 16.40 Laying, spreading and compacting stone aggregate of
specified sizes to WBM specifications in uniform
thickness, hand picking, rolling with 3 wheeled road /
vibratory roller 8-10 tone capacity in stages to proper
grade and camber, applying and brooming requisite
type of screening / binding material to fill up
interstices of coarse aggregate, watering and
compacting to the required density . 200 449.10 Cum 89,820
4.00 16.26 Surface dressing on new surface in two coats with
bitumen of grade VG - 10 of approved quality using
1.8 kg of bitumen per sqm with 1.5 cum of stone
chippings 13.2 mm nominal size per 100 sqm of road
surface for first coat and 1.1 kg. of bitumen per sqm
with 1.00 cu. meter of stone chippings 11.2 mm
nominal size per 100 sqm of road surface for second
coat, including consolidation of each coat separately
with road roller of 6 to 8 tone capacity etc. complete. 3000 191.79 SM 575,370
16.54 Providing and laying Dense Graded Bituminous
Macadam using crushed stone aggregates of
specified grading, premixed with bituminous binder
and filler, transporting the hot mix to work site by
tippers, laying with paver finisher equiped with
electronic sensor to the required grade, level and
alignment and rolling with smooth wheeled, vibratory
and tandem rollers as per specifications to achieve
the desired compaction and density, complete as per
specificatons and directions of Engineer-in-Charge.
16.54.2 50 to 100 mm average compacted thickness with
bitumen of grade VG-30 @5% (percentage by weight
of total mix) and lime filler @ 2% (percentage by
weight of Aggregate) prepared in Drum Type Hot Mix
Plant of 60-90 TPH capacity. cum 8555.10 190 7140.45 Cum 1,356,686
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
16.41
Providing & laying seal coat over prepared surface of
road with bitumen heated in bitumen boiler fixed with
spray set using 98 kg of bitumen of 80/100 grade &
binding surface with 0.90 cum of stone aggregate of
6.7mm size passing 11.2mm sieve and retaining on
2.36 mm sieve per 100 sqm of road surface including
rolling ang finishing with power roller etc complete. 3000 79.85 SM 239,550
Total: Schedule Items: 2,726,856
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
III PLUMBING WORK:
Schedule Items:
SANITARY FIXTURES
1.00 17.1.1 Providing and fixing water closet squatting pan
(Indian type W.C. pan ) with 100mm sand cast Iron P
or S trap, 10 litre low level white P.V.C. flushing
cistern, including flush pipe, with manually controlled
device (handle lever) conforming to IS : 7231, with all
fittings and fixtures complete including cutting and
making good the walls and floors wherever required :
White Vitreous china Orissa pattern W.C. pan of size
580x440mm with integral type foot rests. 0 3494.20 Each -
2.00 17.78 Providing and fixing white vitreous china extended
wall mounting water closet of size 780x370x690 mm
of approved shape including providing and fixing
white vitreous china cistern with dual flush fittings of
flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8
litres), including seat cover and cistern fittings, nuts,
bolts and gasket etc complete. 24 9685.70 Each 232,457
3.00 17.80 Providing and fixing white vitreous china battery
based infrared sensor operated urinal of approx. size
610 x 390 x 370 mm having pre & post flushing with
water ( 250 ml & 500 ml consumption), having water
inlet from back side, including fixing to wall with
suitable brackets all as per manufacturers
specification and direction of Engineer-in-charge. 0 15040.75 Each -
4.00 17.32 Providing and fixing mirror of superior glass (of
approved quality) and of required shape and size with
plastic moulded frame of approved make and shade
with 6 mm thick hard board backing :
5.00 17.32.2 Rectangular shape 453x357mm 13 752.80 Each 9,786
6.00 17.32.4 Rectangular shape 1500x450 mm 8 1323.10 Each 10,585
7.00 17.71 Providing and fixing PTMT liquid soap container
109mm wide, 125mm high and 112mm distance from
wall of standard shape with bracket of the same
materials with snap fittings of approved quality and
colour. weighing not less than 105 gms. 18 137.85 Each 2,481
8.00 17.73 Providing and fixing PTMT towel rail complete with
brackets fixed to wooden cleats with CP brass screws
with concealed fitting arrangement of approved
quality and colour. 600mm long towel rail with total
length of 645mm, width 78mm and effective height of
88mm, weighing not less than 190gms. 18 422.70 Each 7,609
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
9.00 17.75 Providing and fixing PTMT 15 mm Urinal spreader
size 95x69x100 mm with 1/2" BSP thread and
shapes. Weighing not less than 60 gms. 0 106.50 Each -
10.00 18.49.1 Providing and fixing C.P. brass bib cock of approved
quality conforming to IS:8931 :15 mm nominal bore 55 371.70 Each 20,444
11.00 18.51.1 Providing and fixing C.P. brass long body pillar cock
of approved quality conforming to IS standards and
weighing not less than 690 gms. 15 mm nominal bore 15 492.55 Each 7,388
12.00 18.52.1 Providing and fixing C.P. brass stop cock (concealed)
of standard design and of approved make conforming
to IS:8931.15 mm nominal bore 75 545.95 Each 40,946
13.00 18.53.1 Providing and fixing C.P. brass angle valve for basin
mixer and geyser points of approved quality
conforming to IS:8931 a) 15 mm nominal bore 25 475.70 Each 11,893
14.00 19.1.1 Providing and fixing S.W PIPE OF 100MM dia with
fittings 10 216.25 RMT 2,163
15.00 19.1.2 (19.1.2/p354) Providing and fixing S.W PIPE OF
150MM dia with fittings 10 327.05 RMT 3,271
WATER WORKS
16.00 18.70 Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain and brass
threaded fittings, including fixing the pipe with clamps
at 1.0 m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement and
testing of joints complete as per direction of Engineer
in Charge.
15 mm nominal outer dia Pipes 25 142.95 RMT 3,574
20 mm nominal outer dia Pipes 25 179.95 RMT 4,499
25 mm nominal outer dia Pipes 25 216.20 RMT 5,405
32 mm nominal outer dia Pipes 25 289.05 RMT 7,226
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
40 mm nominal outer dia Pipes 20 385.50 RMT 7,710
50 mm nominal outer dia Pipes 15 548.55 RMT 8,228
17.00 18.80 Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain and brass
threaded fittings, including fixing the pipe with clamps
at 1.0 m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement and the
cost of cutting chases and making good the same
including testing of joints complete as per direction of
Engineer in Charge. Concealed work, including
cutting chases and making good the wall etc.
complete.
15 mm nominal outer dia Pipes 10 246.20 RMT 2,462
20 mm nominal outer dia Pipes 10 284.85 RMT 2,849
25 mm nominal outer dia Pipes 10 333.60 RMT 3,336
18.00 18.90 Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain and brass
threaded fittings, including fixing the pipe with clamps
at 1.0 m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement ,trenching
,refilling & testing of joints complete as per direction
of Engineer in Charge.
62.5 mm nominal outer dia Pipes 25 1081.75 RMT 27,044
75 mm nominal outer dia Pipes 30 1201.05 RMT 36,032
100 mm nominal outer dia Pipes 35 1618.10 RMT 56,634
19.00 18.17 Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end) :
25 mm dia nominal bore 15 428.20 Each 6,423
32 mm dia nominal bore 6 500.75 Each 3,005
40 mm dia nominal bore 6 584.70 Each 3,508
50 mm dia nominal bore 6 749.90 Each 4,499
65 mm dia nominal bore 4 1289.80 Each 5,159
80 mm dia nominal bore 2 1919.50 Each 3,839
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
20.00 18.18 Providing and fixing ball valve (brass) of approved
quality, High or low pressure, with plastic floats
complete :
15 mm dia nominal bore 5 287.25 Each 1,436
20 mm dia nominal bore 6 327.05 Each 1,962
25 mm dia nominal bore 3 331.95 Each 996
21.00 19.4.3.1 Providing and fixing square-mouth S.W. gully trap
class SP-1 complete with C.I. grating brick masonry
chamber with water tight C.I. cover with frame of 300
x300 mm size (inside) the weight of cover to be not
less than 4.50 kg and frame to be not less than 2.70
kg as per standard design : 180x150 mm size P type
With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 16 1706.55 Each 27,305
22.00 18.19.3.2 Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end) :
50 mm dia. non-return valve 1 1080.60 Each 1,081
40 MM dia. Non-return valve 1 845.45 Each 845
23.00 12.41 Providing and fixing in position PVC rain water pipes
including all fittings and accessories, making joints /
connections water tight with solvent cement,
scaffolding, making good the damages if any etc.
complete as specified and directed.
24.00 12.41.1 75 mm dia 10 148.75 Each 1,488
25.00 12.41.2 100 mm dia 100 236.35 Each 23,635
26.00 19.32 Making soak pit 2.5 m diameter 3.0 meter deep with
45 x 45 cm dry brick honey comb shaft with bricks
and S.W. drain pipe 100 mm dia., 1.8 m long
complete as per standard design. With common burnt
clay F.P.S. (non modular) bricks of class designation
7.5 0 20681.55 Each -
Total: Schedule Items: 599,200
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
Non-Schedule Items:
RAINWATER PIPES
27.00 NS Supplying and Fixing 75 mm internal dia. 3.5 mm thk.
(weight approx.6.66 Kg./Rm.) centrifugally cast C. I.
pipes Confirming to IS 3989, sockets spigots type
pipe for rain water/soil waste and ventilation with all
fittings including scaffolding, 1 : 1 CM jointing proper
embedding and fixing on wall & column etc complete
as directed. 0 274.31 RMT -
28.00 NS Supplying and Fixing 100 mm internal dia. 4.0 mm
thk. (weight approx. 10.0 Kg./Rm.) centrifugally cast
C. I. pipes Confirming to IS 3989, sockets spigots
type pipe for rain water/soil waste and ventilation with
all fittings including scaffolding, 1 : 1 CM jointing
proper embedding and fixing on wall & column etc
complete as directed. 0 427.97 RMT -
29.00 NS Supplying and Fixing 150 mm internal dia. 5.0 mm
thk. (weight approx. 18.66 Kg./Rm.) centrifugally cast
C. I. pipes Confirming to IS 3989, sockets spigots
type pipe for rain water/soil waste and ventilation with
all fittings including scaffolding, 1 : 1 CM jointing
proper embedding and fixing on wall & column etc
complete as directed. 0 914.72 RMT -
30.00 NS Providing and fixing wash basin with C.I. brackets, 15
mm C.P. brass pillar taps,32 mm C.P. brass waste of
standard pattern, including painting of fittings and
brackets, cutting and making good the walls wherever
require :White Vitreous China Wash basin size
630x450 mm with a pair of 15mm C.P. brass pillar
taps. 10 11859 Each 118,594
31.00 NS Storage type Horizontal / vertical water heater 3 Liters
capacity on wall / loft as per specification. 24 7270 Each 174,488
DRAINAGE WORKS
32.00 NS Providing and fixing in position uPVC/SWR pipe 75
mm dia. in any position including all fittings and
accessories, making joints / connections water tight
with solvent cement, scaffolding if necessary and
making good the damages, if any etc. complete as
specified and directed. (No separate payment shall
be made for fittings and accessories). 100 722 RMT 72,188
33.00 NS Providing and fixing in position uPVC/SWR pipe 110
mm dia. in any position including all fittings and
accessories, making joints / connections water tight
with solvent cement, scaffolding if necessary and
making good the damages, if any etc. complete as
specified and directed. (No separate payment shall
be made for fittings and accessories). 100 904 RMT 90,441
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
34.00 NS Constructing brick masonry inspection chamber 90cm
x 45cm x30cm in cement mortar 1:4 ( 1 cement : 4
coarse sand ) with R.C.C. top slab with 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size), foundation concrete 1:4:8 mix
(1 cement : 4 coarse sand : 8 graded stone aggregate
40 mm nominal size), inside plastering 12 mm thick
with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with floating coat of neat cement and making
haunches, channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size) finished with a floating coat of
neat cement complete as per standard design.
5 9281 Each 46,406
35.00 NS Extra on above item for additional depth above 30 cm
of 230 mm brick walls 5 1238 RMT 6,188
36.00 NS P/F Hinge type Design Ductile Iron cover on
inspection chamber of size 90 x 45 cm and 40 mm.
thick, weighing 50 kg. (approx.) etc. complete as
directed and specified.( I C Ductile Iron cover, Neco
make, Item code MR4 ) 5 6703 Each 33,516
37.00 NS Providing, Laying and Jointing HDPE pipes of PE-80
grade and PN-6 class with butt joints etc.complete as
specified and directed. 160 mm dia (OD) 25 3609 RMT 90,234
38.00 NS Providing and Constructing brick masonry rectangular
septic tank of size of 5.0 x 10.0 x 1.2 M liquid depth
with 230mm brick walls in cement mortar 1:3
plastered both inside & outside with 20 mm thick in
cement mortar 1:2 and neat cement rendering so as
to give a smooth surface including 230mm cement
concrete bedding (M 15) and cement concrete (M 15)
in haunches and bottom finished smooth with 20 mm
thick cement mortar( 1:1), casting of 10 mm thick
RCC pardis as per drawing, providing and fixing of 3
Nos. of D.I. Grade A-15 airtight rectangular frame of
size 0.73 x 0.73 M & cover of size 600 mm dia.
weighing minimum 40Kg. resting on 300 mm high c.c.
cap M 20 with (1:1) cement plaster on both the sides
and necessary C.I. steps (weighing 5.4 kg each)
staggered at 300 mm c/c. including 75 mm wide vata
all round the external portion of the chamber and the
foundation concrete in C.M. 1:1 etc. complete and as
specified & as directed by Engineer-in-Charge.
0 12.38 PER -
39.00 NS Providing and fixing 160 mm dia PVC intercepting
trap (Master trap) of Supreme make in manholes with
stiff mixture of cement mortar 1:1 (1 cement : 1 fine
sand) including testing of joints etc. complete : 1 5156 Each 5,156
40.00 NS Providing and fixing PVC 100 mm Multi or deep seal
Nahani /Floor trap. 10 526 Each 5,259
41.00 NS Providing and placing in position filters of 40 mm
diameter with brass strainer of approved quality.
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
50 mm diameter 10 9075 Each 90,750
65 mm diameter 10 10519 Each 105,188
80 mm diameter 10 15469 Each 154,688
42.00 NS Providing and fixing of MS puddle plate assembly
5mm thick including installation of puddle plate
treated with proper anti-corrosion solution in RCC
properly with outlet coupling connection of size of 65
or 50mm for making RCC tank outlet connections
properly as per client's instructions etc. outlet
connections properly as per client's instructions etc.
complete. 0 1238 Each -
43.00 NS Providing and fixing 600mm diameter cast iron cover
weighing 21 kg minimum with locking arrangement for
overhead tanks with requisite fittings and installation
as per BMC PCO requirements of NECO make etc.
complete. 0 4125 Each -
44.00 NS Providing and fixing overhead sintex water tank with
inlet/ outlet connections etc. complete. 0 10.31 Each -
FIRE EXTINGUISHERS:
45.00 NS Providing and fixing portable fire extinguishers (dry
chemical powder) suitable for wall mounting including
fixing the same with necessary brackets / clamps /
anchor bolts, drilling holes making good the same
painting the surface as specified
10 Kg. 10 7219 Each 72,188
5 kg. 10 4125 Each 41,250
46.00 NS Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end) :100 mm dia
nominal bore 2 14438 Each 28,875
47.00 NS Supplying and erecting ISI mark Centrifugal water
pump (Monoblock), 415V, three phase 50 cycles
A.C.supply of 12.5 HP with discharge of 7/19.6
discharge/liters per second (LPS) for head of 20 / 48
mtrs and 80 mm suction/ 65 mm delivery pipe of size
or with discharge 20 / 33.5 Liters per second (LPS)
for head of 18 / 30 m and 100 mm suction/ 100 mm
delivery pipe of size, on provided c c foundation as
per specification No. WP-CGP 0 59052 Each -
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
48.00 NS Supplying and erecting ISI mark Centrifugal water
pump (Monoblock),415 V, three phase 50 cycles
A.C.supply of 15 HP with discharge 10.5 /19.4 Liters
per second (LPS) for head of 30 / 54 m and 80 mm
suction/ 65 mm delivery pipe of size or with discharge
of 17.5 / 36.8 Liters per second (LPS) for head of 18 /
36 m and 100 mm suction/ 100 mm delivery pipe of
size, on provided c c foundation as per specification
No. WP-CGP 0 66183 Each -
49.00 NS Supplying and erecting ISI mark submersible pump
set suitable for erection on open well of required HP
with 415 V, three phase 50 cycles A.C. supply having
discharge from 400 to 1000 lpm (Max. efficiency at 29
m head & 680 ltr discharge) & delivery pipe of
necessary dia. erected with necessary H type clamps
as per specifications no. WP-OSP 0 30770 Each -
50.00 NS Providing and fixing 15 mm ( 1 1/2") Hot and Cold
Bath Mixer of approved make with crutch including
overhead shower arm and downpour spout etc as
directed. 24 7013 Each 168,300
51.00 NS Providing and fixing in position PVC rain water pipes
including all fittings and accessories, making joints /
connections water tight with solvent cement,
scaffolding, making good the damages if any etc.
complete as specified and directed.
150 mm dia 10 490 Each 4,898
Total: Non-Schedule Items: 1,303,706
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
IV ELECTRICAL WORK
i WIRING:
Schedule Items:
1 1.7 Wiring for circuit/ submain wiring alongwith earth wire
with the following sizes of FRLS PVC insulated
copper conductor, single core cable in surface/
recessed steel conduit as required.
1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 25 206.00 RMT 5,150
1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 25 237.00 RMT 5,925
2 1.3 Wiring for light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed
steel conduit, with modular switch, modular plate,
suitable GI box and earthing the point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core
cable etc. as required.
1.3.1 Group A 10 702.00 Point 7,020
3 1.5 Wiring for light / power plug with 2X4 sq. mm FRLS
PVC insulated copper conductor single core cable in
surface / recessed steel conduit alongwith 1 Each 4
sq. mm FRLS PVC insulated copper conductor single
core cable for loop earthing as required. 10 239.00 RMT 2,390
4 1.6 Wiring for light / power plug with 4X4 sq. mm FRLS
PVC insulated copper conductor single core cable in
surface/ recessed steel conduit alongwith 2 Eachs. 4
sq. mm FRLS PVC insulated copper conductor single
core cable for loop earthing as required. 10 366.00 RMT 3,660
5 1.23 Supplying and fixing following piano type switch/
socket on the existing switch box/ cover including
connections etc. as required.
1.23.1 5/6 A switch 10 34.00 Each 340
1.23.2 2 way 5/6 A switch 10 39.00 Each 390
1.23.3 5/16 A switch 10 75.00 Each 750
1.23.4 3 pin 5/6 A socket outlet 10 42.00 Each 420
1.23.5 6 pin 15/16 A socket outlet 10 86.00 Each 860
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
1.23.6 Telephone socket outlet 10 55.00 Each 550
1.23.7 TV antenna socket outlet 10 48.00 Each 480
1.23.8 Bell push 10 47.00 Each 470
6 1.24 Supplying and fixing following modular switch/ socket
on the existing modular plate & switch box including
connections but excluding modular plate etc. as
required.
1.24.1 5/6 A switch 700 84.00 Each 58,800
1.24.2 2 way 5/6 A switch 70 99.00 Each 6,930
1.24.3 15/16 A switch 220 114.00 Each 25,080
1.24.4 3 pin 5/6 A socket outlet 25 81.00 Each 2,025
1.24.5 6 pin 15/16 A socket outlet 25 153.00 Each 3,825
1.24.6 Telephone socket outlet 12 96.00 Each 1,152
1.24.7 TV antenna socket outlet 11 97.00 Each 1,067
1.24.8 Bell push 6 114.00 Each 684
7 1.25 Supplying and fixing two module stepped type
electronic fan regulator on the existing modular plate
switch box including connections but excluding
modular plate etc. as required. 10 288.00 Each 2,880
8 1.27 Supplying and fixing following size/ modules, GI box
alongwith modular base & cover plate for modular
switches in recess etc. as required.
1.27.1 1 or 2 Module (75 mmX75 mm) 20 175.00 Each 3,500
1.27.2 3 Module (100 mmX75 mm) 20 185.00 Each 3,700
1.27.3 4 Module (125 mmX75 mm) 25 205.00 Each 5,125
1.27.4 6 Module (200 mmX75 mm) 60 258.00 Each 15,480
1.27.5 8 Module (125 mmX125 mm) 200 297.00 Each 59,400
1.27.6 12 Module (200 mmX150 mm) 60 344.00 Each 20,640
9 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN
Cable in the existing surface/ recessed Steel/ PVC
conduit as required.
1.53.1 1 run of cable 10 34.00 RMT 340
1.53.2 2 run of cable 10 59.00 RMT 590
1.53.3 3 run of cable 10 84.00 RMT 840
Total: Schedule Items: 240,463
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
B LIGHT FIXTURES & ACCESSORIES:
Eachtes:
a) Items are including of Supply, Installation, Testing,
Commissioning, Accessories (Pin, Socket, Adopter,
Connecting Wires) etc.
b) Light fixtures shall be of Surfaced or Recessed
type
c) Contractor will handover photocopy of
Manufacture's Gaurantees to the Client for records.
d) Light fixtures shall be of Approved Brands and
minimum 4 star energy rating only
Non-Schedule Items:
1 NS LED Fixtures:
a) 12 Watt 10 400.00 Each 4,000
b) 18 Watt 300 750.00 Each 225,000
2 NS LED Tube Lights:
a) 12 Watt 10 500.00 Each 5,000
b) 22 Watt 10 900.00 Each 9,000
3 NS Ceiling Fans:
a) 900mm Dia sweep 9 2,500.00 Each 22,500
b) 1200mm Dia sweep 110 3,000.00 Each 330,000
4 NS Exhaust Fans: With Frames
a) Wall Mount: 300mm Dia sweep (Metallic/PVC) 10 2,000.00 Each 20,000
b) Window Mount: 150mm Dia sweep (PVC) 24 1,000.00 Each 24,000
Total: Non-Schedule Items: 639,500
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
C PANELS, D.B. AND MISCELLANEOUS:
Non-Schedule Items:
1 NS Supply, Installation, Testing & Commissioning of the
the following totally enclosed, floor/ wall mounting
cubicle type panels / SMDBs / DBs, fabricated with 16
SWG CRCA sheet steel epoxy + polyester power
coated after seven tank process, having dust-proof
and vermin proof neoprene gaskets and hinged doors
with all accessories, complete with internal wiring &
internal accessories such as DIN rails, neutral links,
earth bar, earthing lugs etc, housing following
switchgears, as links, earth bar, earthing lugs etc.
houseing following switchgears, as per technical
specifications and schematic drawings enclosed.
Eachte:
i) Neutral bars & Earth bars shall have 2 spare ways
for each phase
ii) All MCBs will be C curve type unless & otherwise
mentioned.
iii) All MCCBs will have thermo-magnetic release &
will be provided with operating handles.
iv) All MCCCBs will be provided with one set of
auxiliary Each / NC contact & shunt trip coil.
a) 630A 36KA 3P MCCB + BNL 1 50,000 Set 50,000
b) 125A 36KA 3P MCCB + BNL 4 22,000 Set 88,000
2 NS Distribution Board, weather proof, with 1 Each 32 A
/63A TPN MCB incomer, 3 Eachs. 40A 30mA DP
MCB & ELCB's, Brass Neutral Bars, Brass Earth
Bars, Outgoings SP MCBs of suitable ratings as
specified.
a) 6 Way TPN DB with 18 Eachs. 10A SP MCBs 1 13,000 Set 13,000
b) 12 Way TPN DB with 36 Eachs.10A SP MCBs 3 17,000 Set 51,000
Total: Non-Schedule Items: 202,000
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
D CABLING, EARTHING AND MISCELLANEOUS:
Schedule Items:
1 4.1 Supplying and installing following size of perforated
painted with powder coating M.S. cable trays with
perforation Eacht more than 17.5%, in convenient
sections, joined with connectors, suspended from the
ceiling with M.S. suspenders including bolts & nuts,
painting suspenders etc. as required.
4.1.4 300 mm width X 50 mm depth X 1.6 mm thick 11 526.00 RMT 5,786
4.1.6 450 mm width X 50 mm depth X 2.0 mm thick 2 782.00 RMT 1,564
4.1.7 600 mm width X 50 mm depth X 2.0 mm thick 2 950.00 RMT 1,900
2 5.6 Earthing with copper earth plate 600 mm X 600 mm X
3 mm thick including accessories, and providing
masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 meter long etc.
with charcoal/ coke and salt as required. 3 8,289.00 Set 24,867
3 5.10 Providing and fixing 25 mm X 5 mm copper strip earth
conductor in 40 mm dia G.I. pipe from earth electrode
including connection with brass nut, bolt, spring,
washer excavation and re-filling etc. as required. 40 872.00 RMT 34,880
4 5.17 Providing and fixing 4.00 mm dia copper wire on
surface or in recess for loop earthing as required. 40 87.00 RMT 3,480
5 14.14 Providing, laying and fixing following dia RCC pipe
NP2 class (light duty) in ground complete with RCC
collars, jointing with cement mortar 1:2 (1 cement : 2
fine sand) including trenching (75 cm deep) and
refilling etc. as required.
14.14.1 100 mm dia 0 355.00 RMT -
14.14.2 150 mm dia 20 405.00 RMT 8,100
14.14.3 250 mm dia 0 478.00 RMT -
Total: Schedule Items: 80,577
Non-Schedule Items:
6 NS Supply, Installation, Testing & commissioning of
1100V, solid multi stranded copper/Aluminium
conductor, PVC / XLPE sheated cables to IS 1554 (Pt-
l) latest, cables cleated to wall/ceiling or within cable
risers etc. including supply & fixing at aluminium
clamps, aluminium cable tags at every 15 mts
hardware etc.
a) 3.5 Cx300 Sq.mm AL XLPE Armoured 100 1,100.00 RMT 110,000
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
b) 3.5 Cx185 Sq.mm AL XLPE Armoured 100 600.00 RMT 60,000
c) 4 C x 25 sq.mm Copper Armoured 50 400.00 RMT 20,000
d) 4 C x 10 sq mm Copper Armoured 50 300.00 RMT 15,000
e) 3C x 2.5sqmm Copper Armoured 200 70.00 RMT 14,000
7 NS End Termination of the following sizes of 1100V
grade, armoured, aluminium/copper conductor, PVC
insulated and sheathed cables with single
compression brass cable gland with Ni, Cd Plating &
crimping type Copper lugs
a) 3.5 Cx300 Sq.mm AL XLPE Armoured 2 1,200.00 Each 2,400
b) 3.5 Cx185 Sq.mm AL XLPE Armoured 2 650.00 Each 1,300
c) 4 C x 25 sq.mm Copper Armoured 8 450.00 Each 3,600
d) 4 C x 10 sq mm Copper Armoured 8 350.00 Each 2,800
e) 3C x 2.5sqmm Copper Armoured 8 150.00 Each 1,200
8 NS Supply & Installation of following sizes of heavy duty
PVC Conduits including all accessories, fittings, etc,
to be laid on surface for ceiling / concealed in walls.
a) 25 mm dia flexible 10 50.00 RMT 500
9 NS Supply & Installation of UPVC pipes, with smooth
fittings, of 10kgf grade including excavation,
backfilling etc of the soil.
150 mm dia 150 450.00 RMT 67,500
50 mm dia 400 200.00 RMT 80,000
-
10 NS Supply & Laying of rubber matt 6.5mm thk 2 250.00 No 500
11 NS Supply, installation, commissioning & testing 9 meter
steel tubular pole with w/p junction box with
foundation for street lighting and the pole shall be
silver painted 11 9,100.00 100,100
12 NS LED Street Lights (Outdoor Waterproof quality) with
wall supporting arm pipes
80 watts 11 4,000.00 Each 44,000
-
13 NS Supply installation , testing & commissioning 40W
bulkhead fitting on terrace wall 11 700.00 Each 7,700
-
14 NS Supply installation , testing & commissioning 26/30W
small bollard light fitting with luminaire 11 4,000.00 Each 44,000
Total: Non-Schedule Items: 574,600
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
E T.V, TELEPHONE, DATA SYSTEM:
Schedule Items:
1 1.21 Supplying and fixing of following sizes of medium
class PVC conduit along with accessories in
surface/recess including cutting the wall and making
good the same in case of recessed conduit as
required.
1.21.2 25 mm dia 2000 69.00 RMT 138,000
2 1.24 Supplying and fixing following modular switch/ socket
on the existing modular plate & switch box including
connections but excluding modular plate etc. as
required.
1.24.1 5/6 A switch 10 84.00 Each 840
1.23.2 2 way 5/6 A switch 10 99.00 Each 990
1.23.3 15/16 A switch 10 114.00 Each 1,140
1.23.4 3 pin 5/6 A socket outlet 10 81.00 Each 810
1.23.5 6 pin 15/16 A socket outlet 10 153.00 Each 1,530
1.23.6 Telephone socket outlet 10 96.00 Each 960
1.23.7 TV antenna socket outlet 10 97.00 Each 970
1.23.8 Bell push 10 114.00 Each 1,140
3 1.19 Supplying and drawing co-axial TV cable RG-6 grade,
0.7 mm solid copper conductor PE insulated, shielded
with fine tinned copper braid and protected with PVC
sheath in the existing surface/ recessed steel/ PVC
conduit as required. 10 29.00 RMT 290
4 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN
Cable in the existing surface/ recessed Steel/ PVC
conduit as required.
1.53.1 1 run of cable 10 34.00 RMT 340
Total: Schedule Items: 147,010
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
Non-Schedule Items:
5 NS Supply and Installation of KRONE type Telephone tag
blocks with M. S. enclosure complete with
terminations.
a) 20 Pair 6 2,200.00 Each 13,200
b)10 Pair 4 900.00 Each 3,600
6 NS Supply & Installation of CU Conductor Armoured
Cable
a) 10 pair armoured Cable 400 300.00 RMT 120,000
7 NS Supply and installation of following sizes M.S. junction
boxes
150mm x 150mm x 50mm 10 450.00 Each 4,500
300mm x 300mm x 50mm 10 750.00 Each 7,500
600mm x 600mm x 50mm 10 1,800.00 Each 18,000
-
8 NS Supply & Installation of RJ45 jack including
termination of 4 pair cat 6 cable 200 350.00 Each 70,000
Total: Non-Schedule Items: 236,800
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
F IT WORK (HUB AND SERVER):
Supply, Installation, Testing and Commissioning
of the followings:
Schedule Items:
1 1.19 Cat 6 - Category 6 Cable - (Box of 305M) 11 8,845.00 Box 97,295
2 1.19 Patch Cord Cat 6 - 7 feet - Blue 800 203.00 Each 162,400
3 1.19 Patch Cord Cat 6 - 15 feet - Blue 25 435.00 Each 10,875
Total: Schedule Items: 270,570
Non-Schedule Items:
4 NS Information Outlet Cat 6 - Blue 10 290.00 Each 2,900
5 NS Dual Face Plate (White), L-Type 235 560.00 Each 131,600
6 NS 24 Port Cat 6 Jack Panel. 220 131.00 Each 28,820
7 NS 3 SC Duplex Adapter Plate 2 800.00 Each 1,600
8 NS SC Duplex Coupler 9 120.00 Each 1,080
9 NS SC Connector 18 120.00 Each 2,160
10 NS SC to LC Duplex Fiber Patch Cord - 50 Micron - 10
feet 5 800.00 Each 4,000
11 NS 400 Pair MDF with 35 Nos 10 pair Disconnect Module
0 42,000 Set -
12 NS Network Rack 42U Tall,800 MM X 800 MM Depth with
front glass door and rear perporated door, 2 Nos of
5/15 amps 12 Sockets Vertical A.C. Channel, Fan
Housing unit complete with 4 nos. 90 CFM Fans, 4
Pkts Mounting Hardware set of 20 each, 2 nos X
100mm X 100mm Vertical PVC Cable Manager 42U
size. 2 nos X 300mm Cable Basket. 0 125,000 Set -
13 NS Wall Mount 15U Tall,600 MM X 500 MM Depth with
front glass door, 1 Nos of 5/15 amps 6 Sockets
Horizontal A.C. Channel, Fan Housing unit complete
with 2 nos. 90 CFM Fans, 2 Pkts Mounting Hardware
set of 20 each. 3 49,000 Set 147,000
14 NS 1 U Single Sided PVC Cable Manager 6 3,500.00 Each 21,000
15 NS Supply and laying 6 fiber OM3 10GbE
single/multimode OFC cable 300 400 Rmt 120,000
Total: Non-Schedule Items: 460,160
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
G PA CUM MUSIC SYSTEM WORK:
Supply, Installation, Testing and Commissioning
of the followings:
Non-Schedule Items:
1 NS 6 W /11W ceiling mounted / Wall mounted speakers
with line matching Transformer 6 1,900.00 Each 11,400
2 NS 200 W Booster Amplifier 1 7,000.00 Each 7,000
3 NS 19" Rack suitable to mount Amplifiers with all
accessories. 3 12,500.00 Each 37,500
4 NS Dynamic Goose neck microphone with table top
stand. 3 4,000.00 Each 12,000
5 NS Microprocessor based 8 Zone announcing console
complete,with electronic priority switching module. 1 61,200.00 Each 61,200
6 NS 2 C x 1.5 sq.mm annealed tinned copper conductor
PVC sheathed flexible FRLS wires in pvc conduit 200 62.00 RMT 12,400
Total: Non-Schedule Items: 141,500
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
I CIVIL WORK:
A EXCAVATION
Schedule Items:
1.00 2.60 Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means over areas
(exceeding 30cm in depth. 1.5 m in width as well as
10 sqm on plan) including disposal of excavated
earth, lead upto 50m and lift upto 1.5m, disposed
earth to be leveled and neatly dressed.
2.6.1 All kinds of soil 140 125.95 Cum 17,633
2.00 2.11 Extra for excavating in all kinds of soil for depth
exceeding 1.5 m, but not exceeding 3 m. (Rate is
over corresponding basic item for depth upto 1.5
meter). 25 285.91 Cum 7,148
3.00 2.70 Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means over areas
(exceeding 30 cm in depth, 1.5 m in width as well as
10 sqm on plan) including disposal of excavated
earth, lead upto 50 m and lift upto 1.5 m, as directed
by Engineering-in-charge.
2.7.1 Ordinary Rock 0 221.05 Cum -
4.00 2.14 Extra for excavating in ordinary rocks for depth
exceeding 1.5 m, but not exceeding 3 m. (Rate is
over corresponding basic item for depth upto 1.5
meter). 0 448.73 Cum -
5.00 2.7.3 Hard rock (blasting prohibited) 20 619.80 Cum 12,396
6.00 2.14 Extra for excavating in hard rocks for depth
exceeding 1.5 m, but not exceeding 3 m. (Rate is
over corresponding basic item for depth upto 1.5
meter). 0 1258.19 Cum -
TATA INSTITUTE OF SOCIAL SCIENCES
AT TULJAPUR
EXTENSION OF DINNING HALL
PROPOSED DEVELOPMENT FOR
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
7.00 2.25 Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not
exceeding 20cm in depth, consolidating each
deposited layer by ramming and watering, lead
up to 50 m and lift upto 1.5 m. 700 125.75 Cum 88,025
8.00 4.11 Providing and laying damp-proof course 50 mm thick
with cement concrete 1:2:4 (1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size).
25 320.25 SM 8,006
9.00 1.1.2 Carting away excavated material outside premises
wherever directed. 5 km 10 149.17 Cum 1,492
Total: Schedule Items: 134,700
Non-Schedule Items:
10.00 NS Providing and laying 150/200 mm thick soling by hand
broken oversized metal including thorough
compacting, watering etc complete as specified and
directed. 50 1546.88 Cum 77,344
12.00 NS Providing and laying pre-construction antitermite
treatment by approved agency with ISI specifications
with ten years guarantee as directed. (Payment will
be made for plinth area only). 300 92.81 SM 27,844
Total: Non-Schedule Items: 105,188
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
B PLAIN AND REINFORCED CONCRETE WORK:
Notes:
i Concrete has been specified by design and / or
nominal mixes and shall have cube crushing
strengths as laid down by the ISI codes
ii All R. C work shall be executed strictly in accordance
with the instruction, drawings and
details of the Architect / Consulting Engineer and at
all heights, depth and locations
iii The rates for R. C. items shall include for labour,
materials, dewatering, formwork, machinery
equipment, tools scaffolding, walkways, working
platform etc at all levels, heights and
locations and all the operations involved but shall
excludes MS reinforcement / torsteel which
shall be measured and paid for separately.
Necessary provision will be made in the formwork
for embedding electrical conduits by electrical
contractor and other inserts etc as required and
directed.
iv All M. S. reinforcement / torsteel shall be measured
on the quantity actually going into the job
according to the drawing, details. The rates shall
allow for al wastage and rolling margin and
binding wire, chairs, separators etc, which shall not
be paid for separately. Only authorised
labs shall be paid consultant's drawings and
instructions.
v All concrete shall be machine mixed and vibrated.
vi For all thin members like parapets, fins, special
boxes, thin precast units, flower beds, ducts
ledges or beam and slabs, all beams with narrow
width and in members similar to them the
metal used shall be 12 mm below in size and well
graded. In portion of members where
reinforcement is crowded, the same type of metal
shall be used. The rate against
items allow for this.
vii The rate shall allow for champers, grooves lines in R.
C. members as well as necessary
slopes and drops, drip moulds etc as required and
directed.
viii The rate shall be for unfinished R. C. work only,
unless otherwise specified.
ix Bar bending schedule shall be prepared by the
contractor for the approval of Consulting
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
Engineer, before execution of work.
x The rate shall include necessary holes, pockets, etc
and grouting the same later on with
cement mortar 1:1 as required and directed.
xi All shuttering materials, supports joinery etc shall be
approved before concreting by
Consulting Engineer / Architect / Employer.
xii All exposed surfaces of concrete may or may not be
plastered at the discretion of the
Architect / Employer. However all the shuttering
marks or honeycomb shall be rendered
smooth with neat cement or rich cement mortar as
directed.
xiii Contractor will get mixed design from approved
laboratory and in consultations with RCC
consultant, at no extra cost. This shall be done as
and when required and directed. If
instructed the contractor will use weigh batching for
design mix concreting. Depending upon
the circumstances, contractor may be permitted to
convert design mix into volumetric to
be approved by consultant.
xiv As and when required and directed by the Architect /
Consulting Engineer / Employer the
contractor may be required to wash and screen sand /
coarse aggregates at no extra cost.
xv For basement raft and walls sulfate resistant cement
shall be used with minimum cement
content of 310 kg. /Cum. And maximum water cement
ratio 0.5
xvi For any design mix the minimum cement contents will
be 310 kg /cum.
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
B PLAIN AND REINFORCED CONCRETE WORK:
Schedule Items:
1.00 4.1.8 Providing and laying in position cement concrete of
specified grade excluding the cost of centering and
shuttering - All work up to plinth level : PCC 1:4:8 (1
Cement : 4 coarse sand : 8 graded stone aggregate
40mm nominal size)
a. For foundation, floor bedding 15 4,478.15 Cum 67,172
2.00 5.1.2 Providing and laying in position specified grade of
reinforced cement concrete, excluding the cost of
centering, shuttering, finishing and excluding
reinforcement All work up to plinth level : 1:1.5:3 (1
cement : 1.5 coarse sand : 3 graded stone aggregate
20 mm nominal size) M250
a. Footing, Raft, Plinth Beam, Foundation Column 5 6,215.35 Cum 31,077
3.00 5.2.2 Providing and laying in position specified grade of
Reinforced cement concrete work in walls (any
thickness), including attached pilasters, buttresses,
plinth and string courses, fillets, columns, pillars,
piers, abutments, posts and struts etc. up to floor five
level, excluding cost of centering, shuttering, finishing
and excluding reinforcement : M250
a. SS Column, Walls 10 7,145.80 Cum 71,458
4.00 5.30 Providing and laying in position specified grade of
Reinforced cement concrete work in beams,
suspended floors, roofs having slope up to 15°
landings, balconies, shelves, chajjas, lintels, bands,
plain window sills, staircases and spiral stair cases up
to floor five level, excluding the cost of centering,
shuttering, finishing and excluding reinforcement, with
1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size). M250
a. FB, LB, RB, St.Case, Slabs, Chajjas, etc 15 7,390.80 Cum 110,862
5.00 5.90 Centering and shuttering including strutting, propping
etc. and removal of form for :
5.9.1 a. Foundations, footings, bases of columns, etc. for
mass concrete 25 193.95 SM 4,849
5.9.2 b. Walls (any thickness) including attached pilasters,
buttresses, plinth and string courses etc. 15 378.60 SM 5,679
5.9.3 c. Suspended floors, roofs, landings, balconies and
access platform 40 422.30 SM 16,892
5.9.5 d. Lintels, beams, plinth beams, girders, bressumers
and cantilevers 50 342.90 SM 17,145
5.9.6 e. Columns, Pillars, Piers, Abutments, Posts and
Struts 40 467.85 SM 18,714
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
5.9.7 f. Stairs, (excluding landings) except spiral-staircases
75 419.35 SM 31,451
6.00 5.22.1 Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position and
binding all complete upto and above plinth level : Mild
steel/ TMT bars 15 55,300 MT 829,500
Total: Schedule Items: 1,204,799
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
C MASONRY:
Notes:
i Fly ash Bricks / bricks for all masonry work shall be
good quality locally available kiln burnt bricks from
approved source. The crushing strength shall not be
less than 35 Kg / Sq.Cm.
ii The rate quoted shall include:
Making good nitches made by other agency for
embedding electrical conduits, boxes, hold
fasts, other inserts, plumbing pipes etc
Raking out joints for receiving plaster and other
finishing items, forming opening, holes, grooves etc
Work at all heights and levels and in floors and work
in any shape or size such as pillars, curved or
tapered walls, drip moulds projections, entrance steps
and their foundations, architectural mould with
necessary labour, formwork, scaffolding, curing etc
Cost of reinforcement and/or R.C.C. patti for half
brick thick masonry brick work as specified
Vertical/horizontal stiffeners in siporex masonry 100
mm / 150 mm thick as per manufacturer's
specifications.
The proportion of cement mortar specified in items
will be in the order of cement, sand by volume.
iii Keeping the work well wetted for ten days
iv Bricks to be completely wetted before use.
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
C MASONRY:
Schedule Items:
1.00 6.1.2 Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in foundation
and plinth in: Cement mortar 1:6 (1 cement : 6 coarse
sand) 11 4,751.65 Cum 52,268
2.00 6.3.1 Full brick work with common burnt clay machine
moulded perforated bricks of class designation 12.5
conforming to IS: 2222 in uperstructure above plinth
level up to floor five level in cement mortar 1:6 (1
cement : 6 coarse sand) : With F.P.S.(non modular)
bricks 8 1,297.25 SM 10,378
3.00 6.13 Half brick masonry with common burnt clay F.P.S.
(non modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse sand) 9 684.20 SM 6,158
Total: Schedule Items: 68,804
Non-Schedule Items:
4.00 NS Providing and laying approved conventional ground
fly ash bricks with crushing strength of not less than
35 Kg/Sq.Cm in standard size of 230 x 100 x75 mm in
walls, in supper structure, piers in 1:5 cement mortar.
a. 230 mm thick 25 1,350.00 SM 33,750.00
b. 115 mm thick 50.00 700.00 SM 35,000.00
Total: Non-Schedule Items: 68,750
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
D PLASTER:
Notes:
The quoted rates shall include:
i Hacking and bush hammering to form key for plaster
and raking out joints
ii Provision of drip mould, rounding or chamfering
edges, grooves and also work of small nature, narrow
widths etc at any level
iii Putting up samples of required finishes in panels for
approval of the Engineer - in charge/ Architect.
iv Finishing the opening of electric switch socket outlet,
fittings, boxes etc to match the surroundings and
making good recess for electrical conduits, plumbing,
piping etc with chicken wire mesh wherever directed.
v Provision of double scaffolding, ladders, curing
networking at all heights and floors
vi Cost of supplying and fixing chicken wire mesh (24
SWG) of width not less than 125 mm at junction of
concrete with bricks work or block work wherever
required and as directed and on recesses for
electrical conduits, plumbing pipes etc complete.
vii One coat of white wash immediately apply after
curing of plaster for seven days is over.
viii Sand for the plastering shall be exclusively river sand.
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
D PLASTER:
Schedule Items:
1.00 13.1.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine
sand) 1300 172.95 SM 224,835
2.00 13.26 Providing and applying plaster of Paris putty of 2 mm
thickness over plastered surface to prepare the
surface even and smooth complete. 1300 118.70 SM 154,310
Total: Schedule Items: 379,145
Non-Schedule Items:
3.00 NS Providing sand face plaster externally using approved
screened sand in all positions including base coat of
15 mm thick in 1:4 cement mortar using waterproofing
compound at the rate of 1 kg per bag and curing the
same for not less than two days and keeping the
surface of base coat rough to received the sand
faced treatment 6 to 8 mm thick in 1:4 cement mortar
finishing the surface by taking out grains and curing
for 14 days including scaffolding etc complete.
400 567.19 SM 226,875
Total: Non-Schedule Items: 226,875
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
E FLOORING, SKIRTING AND DADO:
Schedule Items:
1.00 11.41.1 Providing and laying vitrified floor tiles in different
sizes (thickness to be specified by the manufacturer)
with water absorption less than 0.08% and
conforming to IS : 15622, of approved make, in all
colours and shades, laid on 20mm thick cement
mortar 1:4 (1 cement : 4 coarse sand), including
grouting the joints with white cement and matching
pigments etc., complete. Size of Tile 500x500 mm 50 988.45 SM 49,423
2.00 11.46.1 Providing and laying Vitrified tiles in different sizes
(thickness to be specified by manufacturer), with
water absorption less than 0.08 % and conforming to
I.S. 15622, of approved make, in all colours & shade,
in skirting, dado, riser of steps, over 12 mm thick bed
of cement mortar 1:3 (1 cement: 3 coarse sand),
including grouting the joint with white cement &
matching pigments etc. complete. Size of Tile
500x500 mm 200 1004.25 SM 200,850
3.00 8.12.1 Providing and laying flamed finish Granite stone
flooring in required design and patterns, in linear as
well as curvilinear portions of the building all complete
as per the architectural drawings with 18 mm thick
stone slab over 20 mm (average) thick base of
cement mortar 1:4 (1 cement : 4 coarse sand) laid
and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching
shade including rubbing, curing and polishing etc. all
complete as specified and as directed by the
Engineer in-Charge : a. Flamed finish granite stone
slab Jet Black, Cherry Red, Elite Brown, Cat Eye or
equivalent. 10 2887.85 SM 28,879
5.00 11.26 Kota stone slab flooring over 20 mm (average) thick
base laid over and jointed with grey cement slurry
mixed with pigment to match the shade of the slab,
including rubbing and polishing complete with base of
cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25
mm thick 600 1158.10 SM 694,860
5.00 11.27 Kota stone slabs 20 mm thick in risers of steps,
skirting, dado, sills, jambs and pillars laid on 12 mm
(average) thick cement mortar 1:3 (1 cement: 3
coarse sand) and jointed with grey cement slurry
mixed with pigment to match the shade of the slabs,
including rubbing and polishing complete. 150 1238.20 SM 185,730
6.00 11.31 Extra for pre finished bull nozing in treads of steps of
Kota stone 110 84.85 Rmt 9,334
Total: Schedule Items: 1,169,075
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
F DOORS AND WINDOWS:
Notes:
i Unless otherwise specified timber for wood work shall
be good quality, well seasoned C.P.
teak wood free from all defects, knowts, sapwood etc
and shall be got approved from the
Engineer before fixing or applying primer coat.
ii Teak particle boards and resin bonded block boards
or any other wood base board shall be
bonded with phenol formaldehyde synthetic resin and
shall have veneer as specified in the
concerned item. This should be approved brand.
iii The rates quoted shall include
iiia Unless otherwise specified, painting all wood work
with three coats of approved quality and
shade synthetic enamel paint as directed, over a coat
of approved wood primer, including
preparations of the surface to get a uniform and
smooth finish. Timber faces coming in
contract with masonry / concrete shall be painted with
three coats of approved wood
preservative and anitermite paint before fixing in
position. The paint could be glossy or
matt finish as directed.
iiib Providing and fixing glass panels wherever specified
of approved make and thickness with
necessary teak wood beading as per specifications.
The thickness of glass panels
should be as per the tender provision but not less
than 4 mm thick.
iiic Providing and fixing necessary holdfasts and
embedding them in C. C. 1:2:4 or dash
fasteners as required. The holdfasts should be 30 cm
in length made from 40mm x 6 mm
MS flats with fish tail ends embedded in C. C. 1:2:4
concrete of 35 cms x 15 cms for doors.
There should be 6 Nos. such holdfasts for doors and
for windows 4 Nos. For fixing on columns
/concrete, dash fasteners of approved size and
numbers should be used as per directions.
iiid Making champers, grooves, moulded surfaces cover
moulds etc
iiie Architraves made out of 1 1/2" x 3/4" as per design.
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
iv Unless otherwise stated the rates quoted shall also
include fixing of all hardware fitting and
fixtures (including screws) heavy quality hinges,
pivots, aldrops, tower bolts, hasp and staples
hooks and yes, handles, door stoppers, door closers,
peepholes, letter slots, lettering
numerical on entrance door, high latch, safety chain
knobs, mortise locks, floor spring etc
as required and directed.
v Flush shutters should be ISI approved BWP grade
and shall have teak wood lipping of
required thickness as per drawing and as directed.
F DOORS AND WINDOWS:
Schedule Items:
1.00 9.1.1 Providing wood work in frames of doors, windows,
clerestory windows and other frames, wrought framed
and fixed in position with hold fast lugs or with dash
fasteners of required dia & length ( hold fast lugs or
dash fastener shall be paid for separately). Second
class teak wood 2 92743 Cum 185,486
2.00 9.122.1 P/F 30mm thk Fiberglass Reinforced Plastic (FRP)
panelled door shutter of required colour and approved
brand. made with fire resistant grade ubsaturated
polyester resin mouded to 3mm thk FRP laminate for
forming hollow rail & styles , with wooden frames and
suitable blocks of seasoned wood inside at required
places for fixing fittings, cast monolithically with 5mm
thk FRP laminate for panels confirming to IS 14856-
2000 including fixing in frames. 20 2187.35 Sqm 43,747
3.00 9.20.1 Providing & fixing 35mm thk ISI marked flush door
shutters confirming to IS:2202 (Part I) decorative type
, core of blockboard construction with frame of first
class hard wood and well matched teak 3 ply
vineering/lamiate of approved make on both faces of
shutters with stainless steel butt hinges 30 2488.95 Sqm 74,669
4.00 9.50 Providing & fixing pannelled & glazed shutter for
doors window and clerestory windows including
Brass/ stainless steel hingeswith necessary screws
excluding panelling which shall be paid separately -
9.5.1.1 35mm second class teak wood shutters 12 2650.00 Sqm 31,800
5.00 21.10 Providing & fixing aluminium work for doors, windows,
ventilators and partitions with extruded built up
standard tubular sections and other sections of
approved make confirming to IS :733 and IS:1285
fixed with rawl plug and screws or with fixing clips
including necessary filling up of gaps at junctions , at
top, bottom & sides with EPDM rubber/ neoprene
gasket etc. Aluminium sections shall be smooth , rust
free, straight, mitered and joined mechanically
wherever required including cleat angle.Aluminium
snap bidding for glazing, panelling, C. P. ,brass
stainless steel screws. All complete as per architect's
drawing and direction of engineer-in-charge -
21.1.1.1 Anodised aluminium (anodised transparent or dyed to
required shade according to IS 1868 Minimum anodic
coating of grade AC 15) 800 355.20 kg 284,160
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
6.00 21/01/02 For shutters of doors, windows & ventilators including
providing & fixing hinges/pivot and making provisions
for fixing of fittings wherever required including cost
of EPDM rubber/neoprene gasket required -
21.1,2.1 Anodised aluminium (anodised transparent or dyed to
required shade according to IS 1868 Minimum anodic
coating of grade AC 15) 110 415.05 Kg 45,656
7.00 21.30 Providing and fixing glazing in aluminium door,
window ventilator shutter and partitions etc. -
02/03/02 With float glass panes of 5.5mm thickness 200 1003.95 Sqm 200,790
Total: Schedule Items: 866,307
Non-Schedule Items:
8.00 NS Providing & fixing heavy brass handles , tower bolt ,
eldrop of approved make to flush shutters/panelled
shutter 30 950 SM 28,500
9.00 NS Providing and fixing with approved 1.5 mm thick
laminates on both faces etc complete and as directed
and as per drawing. 10 1856 SM 18,563
-
10.00 NS Providing & fixing stainless steel mosquito net in one
of panel of aluminium window 40 1100 Sqm 44,000
-
11.00 NS Providing concealed lock and handles of approved
shade in aluminium windows 180 300 Sqm 54,000
Total: Non Schedule Items: 145,063
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
G WATERPROOFING:
Schedule Items:
1.00 22.7.1 Providing and laying integral cement based water
proofing treatment including preparation of surface as
required for treatment of roofs, balconies, terraces etc
consisting of following operations: a) Applying a slurry
coat of neat cement using 2.75 kg/sqm of cement
admixed with water proofing compound conforming to
IS. 2645 and approved by Engineer-in-charge over
the RCC slab including adjoining walls upto 300 mm
height including cleaning the surface before
treatment. b) Laying brick bats with mortar using
broken bricks/brick bats 25 mm to 115 mm size with
50% of cement mortar 1:5 (1 cement : 5 coarse sand)
admixed with water proofing compound conforming to
IS : 2645 and approved by Engineer -in-charge over
20 mm thick layer of cement mortar of mix 1:5 (1
cement :5 coarse sand ) admixed with water proofing
compound conforming to IS : 2645 and approved by
Engineer-in-charge to required slope and treating
similarly the adjoining walls upto 300 mm height
including rounding of jns of walls and slabs.C)After.....
c) After two days of proper curing applying a second
coat of cement slurry using 2.75 kg/ sqm of cement
admixed joint less cement mortar of mix 1:4 (1
cement :4 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by
Engineer-in-charge including laying glass fibre cloth
of approved quality in top layer of plaster and finally
finishing the surface with trowel with neat cement
slurry and making pattern of 300x300 mm square 3
mm deep. e) The whole terrace so finished shall be
flooded with water for a minimum period of two weeks
for curing and for final test. All above operations to be
done in order and as directed and specified by the
Engineer in- Charge : With average thickness of 120
mm and minimum thickness at khurra as 65 mm.
800 1034.65 SM 827,720
Total: Schedule Items: 827,720
Non-Schedule Items:
2.00 NS Providing and laying patented waterproof cement
plaster of 20 mm thick for toilets/bathroom floors,
finished rough with ten years guarantee as per
approved agencies specifications and as directed as
per drawing. 7 773 SM 5,414
3.00 NS Do -- same with 12 mm thick waterproof cement
plaster for walls in toilets/bath etc with rough surface
to received tiles 50 516 SM 25,781
4.00 NS Providing and laying brick bat coba with patented
waterproofing in toilets, w.c. slabs (Over waterproof
plaster) finished on top with waterproof plaster with
rough surface to received flooring tiles above, as per
agencies specifications and as directed 15 6188 Cum 92,813
Total: Non-Schedule Items: 124,008
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
H PAINTING:
Schedule Items:
1.00 13.85.3 Applying priming coats with primer of approved brand
and manufacture, having low VOC (Volatile Organic
Compound ) content. With water thinnable cement
primer on wall surface having VOC content less than
50 grams/litre 1250 36.95 SM 46,188
2.00 13.83.2 Wall painting with premium acrylic emulsion paint of
interior grade, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre of
approved brand and manufacture, including applying
additional coats wherever required to achieve even
shade and colour: 2 Coats. 1250 71.00 SM 88,750
3.00 13.62.1 Painting with synthetic enamel paint of approved
brand and manufacture of required colour to give an
even shade : Two or more coats on new work over
an under coat of suitable shade with ordinary paint of
approved brand and manufacture 20 112.30 SM 2,246
4.00 13.46.1 Finishing walls with Acrylic Smooth exterior paint of
required shade : New work (Two or more coat applied
@ 1.67 ltr/10 sqm over
and including priming coat of exterior primer applied
@ 2.20 kg/ 10 sqm) 500 96.05 SM 48,025
Total: Schedule Items: 185,209
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
J STRUCTURAL STEEL:
Schedule Items:
1.00 10.30 Providing and fixing in position collapsible steel
shutters with vertical channels 20x10x2 mm and
braced with flat iron diagonals 20x5 mm size, with top
and bottom rail of T-iron 40x40x6 mm, with 40 mm dia
steel pulleys, complete with bolts, nuts, locking
arrangement, stoppers, handles, including applying a
priming coat of approved steel primer. 10 5361 SM 53,607
Total: Schedule Items: 53,607
Non-Schedule Items:
2.00 NS Providing and fixing m.s. grill / m.s. railing as per
architectural drawing. Applying two coats of
approved chlorinated rubber paint over a coat of red
oxide primer. 225 1238 RM 278,438
Total: Non-Schedule Items: 278,438
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
K MISCELLANEOUS:
Schedule Items:
1.00 22.2.1 Providing and laying integral cement based treatment
for water proofing on the vertical surface by fixing
specified stone slab 22 mm to 25 mm thick with
cement slurry mixed with water proofing compound
conforming to IS:2645 in recommended proportions
with a gap of 20 mm (minimum) between stone slabs
and the receiving surfaces and filling the gaps with
neat cement slurry mixed with water proofing
compound and finishing the exterior of stone slab with
cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm
thick with neat cement punning mixed with water
proofing
compound in recommended proportion complete at all
levels and as directed by Engineer-in-charge : Using
rough Kota stone
b. For walls & raft 10 1253.30 SM 12,533
Total: Schedule Items: 12,533
Non-Schedule Items:
2.00 NS Providing and fixing of specified width, kitchen
platform in granite of approved quality and colour
over cudappa slab supported by sandwiched
cudappa shelves, and granite facia all as per drawing
and as directed. Rate to include approved S. S. sink
size 2'-00 x 2'-00
Note: Ceramic tiles, dado above and below kitchen
platform will be paid separately as per tender item
a. Kitchen platform 450 mm wide 15 4538 RM 68,063
3.00 NS Providing and fixing t.w. hand rail 75 x 60 mm fixed
on RCC pardi as per architectural drawings and
details 12 1031 RM 12,375
4.00 NS Constructing over head / Underground water tank
with RCC walls, slabs, beams, etc including M. S.
reinforcement in M-250 grade concrete centering
finishing all inside. Surface with India Waterproofing
Treatment (with guarantee for 10 years) outside
surfaces plastered with sand faced cement plaster in
CM 1:4 with waterproof compound inlet, outlet GI
pipes mosquito proof manhole covers with frames
inter connecting GI pipes with plugs GI overflow pipes
with plugs bends etc vent pipes controlling valves,
ball valve with polyurethene floats. MS ladder
properly fixed at both ends etc complete and as
directed. 25000 15.47 LIT 386,719
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
5.00 NS Providing and supplying heavy duty injection
adhesive for rebar / Anchor Fastener fixing in
Wet/Dry conditions HILTI HIT-RE 500 for following
diameters of HILTI India Pvt Ltd. The system should
be made of two foils consisting of resin and Hardener
foil pack.The system can be used for rebar fixing or
threaded rods viz HAS-E rods. The installation and
the setting instructions should be strictly followed as
per the manufacturers recommendations. (Rate shall
be inclusive of required all Threaded rods,
reinforcements steel etc).
Hilty 08 mm dia. 10 186 Each 1,856
Hilty 10 mm dia. 10 211 Each 2,114
Hilty 12 mm dia. 10 237 Each 2,372
Hilty 16 mm dia. 10 289 Each 2,888
Hilty 20 mm dia. 10 330 Each 3,300
Total: Non-Schedule Items: 479,686
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
II ROAD WORK:
Asphalt Road:
Schedule Items:
1.00 16.10 Preparation and consolidation of sub grade with
power road roller of 8 to 12 tone capacity after
excavating earth to an average of 40 cm depth,
dressing to camber and consolidating with road roller
including making good the undulations etc. and re-
rolling the sub grade and disposal of surplus earth
with lead upto 50 meters. 80 180.20 SM 14,416
2.00 16.3.1 Supplying and stacking at site, 90 mm to 45 mm size
stone aggregate 16 1336.05 Cum 21,377
3.00 16.40 Laying, spreading and compacting stone aggregate of
specified sizes to WBM specifications in uniform
thickness, hand picking, rolling with 3 wheeled road /
vibratory roller 8-10 tone capacity in stages to proper
grade and camber, applying and brooming requisite
type of screening / binding material to fill up
interstices of coarse aggregate, watering and
compacting to the required density . 12 449.10 Cum 5,389
4.00 16.26 Surface dressing on new surface in two coats with
bitumen of grade VG - 10 of approved quality using
1.8 kg of bitumen per sqm with 1.5 cum of stone
chippings 13.2 mm nominal size per 100 sqm of road
surface for first coat and 1.1 kg. of bitumen per sqm
with 1.00 cu. meter of stone chippings 11.2 mm
nominal size per 100 sqm of road surface for second
coat, including consolidation of each coat separately
with road roller of 6 to 8 tone capacity etc. complete. 80 191.79 SM 15,343
16.54 Providing and laying Dense Graded Bituminous
Macadam using crushed stone aggregates of
specified grading, premixed with bituminous binder
and filler, transporting the hot mix to work site by
tippers, laying with paver finisher equiped with
electronic sensor to the required grade, level and
alignment and rolling with smooth wheeled, vibratory
and tandem rollers as per specifications to achieve
the desired compaction and density, complete as per
specificatons and directions of Engineer-in-Charge.
16.54.2 50 to 100 mm average compacted thickness with
bitumen of grade VG-30 @5% (percentage by weight
of total mix) and lime filler @ 2% (percentage by
weight of Aggregate) prepared in Drum Type Hot Mix
Plant of 60-90 TPH capacity. cum 8555.10 5 7140.45 Cum 35,702
16.41
Providing & laying seal coat over prepared surface of
road with bitumen heated in bitumen boiler fixed with
spray set using 98 kg of bitumen of 80/100 grade &
binding surface with 0.90 cum of stone aggregate of
6.7mm size passing 11.2mm sieve and retaining on
2.36 mm sieve per 100 sqm of road surface including
rolling ang finishing with power roller etc complete. 80 79.85 SM 6,388
Total: Schedule Items: 98,615
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
III PLUMBING WORK:
Schedule Items:
SANITARY FIXTURES
1.00 17.1.1 Providing and fixing water closet squatting pan
(Indian type W.C. pan ) with 100mm sand cast Iron P
or S trap, 10 litre low level white P.V.C. flushing
cistern, including flush pipe, with manually controlled
device (handle lever) conforming to IS : 7231, with all
fittings and fixtures complete including cutting and
making good the walls and floors wherever required :
White Vitreous china Orissa pattern W.C. pan of size
580x440mm with integral type foot rests. 1 3494.20 Each 3,494
2.00 17.78 Providing and fixing white vitreous china extended
wall mounting water closet of size 780x370x690 mm
of approved shape including providing and fixing
white vitreous china cistern with dual flush fittings of
flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8
litres), including seat cover and cistern fittings, nuts,
bolts and gasket etc complete. 2 9685.70 Each 19,371
3.00 17.80 Providing and fixing white vitreous china battery
based infrared sensor operated urinal of approx. size
610 x 390 x 370 mm having pre & post flushing with
water ( 250 ml & 500 ml consumption), having water
inlet from back side, including fixing to wall with
suitable brackets all as per manufacturers
specification and direction of Engineer-in-charge. 0 15040.75 Each -
4.00 17.32 Providing and fixing mirror of superior glass (of
approved quality) and of required shape and size with
plastic moulded frame of approved make and shade
with 6 mm thick hard board backing :
5.00 17.32.2 Rectangular shape 453x357mm 6 752.80 Each 4,517
6.00 17.32.4 Rectangular shape 1500x450 mm 2 1323.10 Each 2,646
7.00 17.71 Providing and fixing PTMT liquid soap container
109mm wide, 125mm high and 112mm distance from
wall of standard shape with bracket of the same
materials with snap fittings of approved quality and
colour. weighing not less than 105 gms. 18 137.85 Each 2,481
8.00 17.73 Providing and fixing PTMT towel rail complete with
brackets fixed to wooden cleats with CP brass screws
with concealed fitting arrangement of approved
quality and colour. 600mm long towel rail with total
length of 645mm, width 78mm and effective height of
88mm, weighing not less than 190gms. 6 422.70 Each 2,536
9.00 17.75 Providing and fixing PTMT 15 mm Urinal spreader
size 95x69x100 mm with 1/2" BSP thread and
shapes. Weighing not less than 60 gms. 0 106.50 Each -
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
10.00 18.49.1 Providing and fixing C.P. brass bib cock of approved
quality conforming to IS:8931 :15 mm nominal bore 2 371.70 Each 743
11.00 18.51.1 Providing and fixing C.P. brass long body pillar cock
of approved quality conforming to IS standards and
weighing not less than 690 gms. 15 mm nominal bore 8 492.55 Each 3,940
12.00 18.52.1 Providing and fixing C.P. brass stop cock (concealed)
of standard design and of approved make conforming
to IS:8931.15 mm nominal bore 2 545.95 Each 1,092
13.00 18.53.1 Providing and fixing C.P. brass angle valve for basin
mixer and geyser points of approved quality
conforming to IS:8931 a) 15 mm nominal bore 14 475.70 Each 6,660
14.00 19.1.1 Providing and fixing S.W PIPE OF 100MM dia with
fittings 10 216.25 RMT 2,163
15.00 19.1.2 (19.1.2/p354) Providing and fixing S.W PIPE OF
150MM dia with fittings 10 327.05 RMT 3,271
WATER WORKS
16.00 18.70 Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain and brass
threaded fittings, including fixing the pipe with clamps
at 1.0 m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement and
testing of joints complete as per direction of Engineer
in Charge.
15 mm nominal outer dia Pipes 15 142.95 RMT 2,144
20 mm nominal outer dia Pipes 15 179.95 RMT 2,699
25 mm nominal outer dia Pipes 15 216.20 RMT 3,243
32 mm nominal outer dia Pipes 15 289.05 RMT 4,336
40 mm nominal outer dia Pipes 30 385.50 RMT 11,565
50 mm nominal outer dia Pipes 15 548.55 RMT 8,228
17.00 18.80 Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain and brass
threaded fittings, including fixing the pipe with clamps
at 1.0 m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement and the
cost of cutting chases and making good the same
including testing of joints complete as per direction of
Engineer in Charge. Concealed work, including
cutting chases and making good the wall etc.
complete.
15 mm nominal outer dia Pipes 100 246.20 RMT 24,620
20 mm nominal outer dia Pipes 30 284.85 RMT 8,546
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
25 mm nominal outer dia Pipes 30 333.60 RMT 10,008
18.00 18.90 Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply, including all CPVC plain and brass
threaded fittings, including fixing the pipe with clamps
at 1.0 m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement ,trenching
,refilling & testing of joints complete as per direction
of Engineer in Charge.
62.5 mm nominal outer dia Pipes 125 1081.75 RMT 135,219
75 mm nominal outer dia Pipes 25 1201.05 RMT 30,026
100 mm nominal outer dia Pipes 15 1618.10 RMT 24,272
19.00 18.17 Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end) :
25 mm dia nominal bore 15 428.20 Each 6,423
32 mm dia nominal bore 6 500.75 Each 3,005
40 mm dia nominal bore 6 584.70 Each 3,508
50 mm dia nominal bore 6 749.90 Each 4,499
65 mm dia nominal bore 4 1289.80 Each 5,159
80 mm dia nominal bore 2 1919.50 Each 3,839
20.00 18.18 Providing and fixing ball valve (brass) of approved
quality, High or low pressure, with plastic floats
complete :
15 mm dia nominal bore 5 287.25 Each 1,436
20 mm dia nominal bore 3 327.05 Each 981
25 mm dia nominal bore 3 331.95 Each 996
21.00 19.4.3.1 Providing and fixing square-mouth S.W. gully trap
class SP-1 complete with C.I. grating brick masonry
chamber with water tight C.I. cover with frame of 300
x300 mm size (inside) the weight of cover to be not
less than 4.50 kg and frame to be not less than 2.70
kg as per standard design : 180x150 mm size P type
With common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 4 1706.55 Each 6,826
22.00 18.19.3.2 Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end) :
50 mm dia. non-return valve 1 1080.60 Each 1,081
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
40 MM dia. Non-return valve 1 845.45 Each 845
23.00 12.41 Providing and fixing in position PVC rain water pipes
including all fittings and accessories, making joints /
connections water tight with solvent cement,
scaffolding, making good the damages if any etc.
complete as specified and directed.
24.00 12.41.1 75 mm dia 10 148.75 Each 1,488
25.00 12.41.2 100 mm dia 20 236.35 Each 4,727
26.00 19.32 Making soak pit 2.5 m diameter 3.0 meter deep with
45 x 45 cm dry brick honey comb shaft with bricks
and S.W. drain pipe 100 mm dia., 1.8 m long
complete as per standard design. With common burnt
clay F.P.S. (non modular) bricks of class designation
7.5 1 20681.55 Each 20,682
Total: Schedule Items: 383,315
Non-Schedule Items:
RAINWATER PIPES
27.00 NS Supplying and Fixing 75 mm internal dia. 3.5 mm thk.
(weight approx.6.66 Kg./Rm.) centrifugally cast C. I.
pipes Confirming to IS 3989, sockets spigots type
pipe for rain water/soil waste and ventilation with all
fittings including scaffolding, 1 : 1 CM jointing proper
embedding and fixing on wall & column etc complete
as directed. 0 274.31 RMT -
28.00 NS Supplying and Fixing 100 mm internal dia. 4.0 mm
thk. (weight approx. 10.0 Kg./Rm.) centrifugally cast
C. I. pipes Confirming to IS 3989, sockets spigots
type pipe for rain water/soil waste and ventilation with
all fittings including scaffolding, 1 : 1 CM jointing
proper embedding and fixing on wall & column etc
complete as directed. 0 427.97 RMT -
29.00 NS Supplying and Fixing 150 mm internal dia. 5.0 mm
thk. (weight approx. 18.66 Kg./Rm.) centrifugally cast
C. I. pipes Confirming to IS 3989, sockets spigots
type pipe for rain water/soil waste and ventilation with
all fittings including scaffolding, 1 : 1 CM jointing
proper embedding and fixing on wall & column etc
complete as directed. 0 914.72 RMT -
30.00 NS Providing and fixing wash basin with C.I. brackets, 15
mm C.P. brass pillar taps,32 mm C.P. brass waste of
standard pattern, including painting of fittings and
brackets, cutting and making good the walls wherever
require :White Vitreous China Wash basin size
630x450 mm with a pair of 15mm C.P. brass pillar
taps. 8 11859 Each 94,875
31.00 NS Storage type Horizontal / vertical water heater 3 Liters
capacity on wall / loft as per specification. 2 7270 Each 14,541
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
32.00 NS Storage type Horizontal / vertical water heater 15
Liters capacity on wall / loft as per specification. 1 20000 20,000
33.00 NS Storage type Horizontal / vertical water heater 35
Liters capacity on wall / loft as per specification. 1 25000 25,000
34.00 NS
Storage type Horizontal / vertical water heater 50
Liters capacity on wall / loft as per specification. 1 35000 35,000
35.00
NS
Providing and installing water cooler of approved
make (Nominal cooling capacity/Storage capacity )
(SP-ME-TS-120
a 20/40 2 20000 40,000
b 40/80 2 25000 50,000
c 150/150 2 50000 100,000
DRAINAGE WORKS
36.00 NS Providing and fixing in position uPVC/SWR pipe 75
mm dia. in any position including all fittings and
accessories, making joints / connections water tight
with solvent cement, scaffolding if necessary and
making good the damages, if any etc. complete as
specified and directed. (No separate payment shall
be made for fittings and accessories). 40 722 RMT 28,875
37.00 NS Providing and fixing in position uPVC/SWR pipe 110
mm dia. in any position including all fittings and
accessories, making joints / connections water tight
with solvent cement, scaffolding if necessary and
making good the damages, if any etc. complete as
specified and directed. (No separate payment shall
be made for fittings and accessories). 80 904 RMT 72,353
38.00 NS Constructing brick masonry inspection chamber 90cm
x 45cm x30cm in cement mortar 1:4 ( 1 cement : 4
coarse sand ) with R.C.C. top slab with 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size), foundation concrete 1:4:8 mix
(1 cement : 4 coarse sand : 8 graded stone aggregate
40 mm nominal size), inside plastering 12 mm thick
with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with floating coat of neat cement and making
haunches, channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size) finished with a floating coat of
neat cement complete as per standard design.
4 9281 Each 37,125
39.00 NS Extra on above item for additional depth above 30 cm
of 230 mm brick walls 4 1238 RMT 4,950
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
40.00 NS P/F Hinge type Design Ductile Iron cover on
inspection chamber of size 90 x 45 cm and 40 mm.
thick, weighing 50 kg. (approx.) etc. complete as
directed and specified.( I C Ductile Iron cover, Neco
make, Item code MR4 ) 4 6703 Each 26,813
41.00 NS Providing, Laying and Jointing HDPE pipes of PE-80
grade and PN-6 class with butt joints etc.complete as
specified and directed. 160 mm dia (OD) 50 3609 RMT 180,469
-
42.00 NS Providing and Constructing brick masonry rectangular
septic tank of size of 5.0 x 10.0 x 1.2 M liquid depth
with 230mm brick walls in cement mortar 1:3
plastered both inside & outside with 20 mm thick in
cement mortar 1:2 and neat cement rendering so as
to give a smooth surface including 230mm cement
concrete bedding (M 15) and cement concrete (M 15)
in haunches and bottom finished smooth with 20 mm
thick cement mortar( 1:1), casting of 10 mm thick
RCC pardis as per drawing, providing and fixing of 3
Nos. of D.I. Grade A-15 airtight rectangular frame of
size 0.73 x 0.73 M & cover of size 600 mm dia.
weighing minimum 40Kg. resting on 300 mm high c.c.
cap M 20 with (1:1) cement plaster on both the sides
and necessary C.I. steps (weighing 5.4 kg each)
staggered at 300 mm c/c. including 75 mm wide vata
all round the external portion of the chamber and the
foundation concrete in C.M. 1:1 etc. complete and as
specified & as directed by Engineer-in-Charge.
60000.00 12 Lit 720,000
43.00 NS Providing and fixing 160 mm dia PVC intercepting
trap (Master trap) of Supreme make in manholes with
stiff mixture of cement mortar 1:1 (1 cement : 1 fine
sand) including testing of joints etc. complete : 1 5156 Each 5,156
44.00 NS Providing and fixing PVC 100 mm Multi or deep seal
Nahani /Floor trap. 12 526 Each 6,311
45.00 NS Providing and placing in position filters of 40 mm
diameter with brass strainer of approved quality.
50 mm diameter 1 9075 Each 9,075
65 mm diameter 1 10519 Each 10,519
80 mm diameter 1 15469 Each 15,469
46.00 NS Providing and fixing of MS puddle plate assembly
5mm thick including installation of puddle plate
treated with proper anti-corrosion solution in RCC
properly with outlet coupling connection of size of 65
or 50mm for making RCC tank outlet connections
properly as per client's instructions etc. outlet
connections properly as per client's instructions etc.
complete. 1 1238 Each 1,238
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
47.00 NS Providing and fixing 600mm diameter cast iron cover
weighing 21 kg minimum with locking arrangement for
overhead tanks with requisite fittings and installation
as per BMC PCO requirements of NECO make etc.
complete. 3 4125 Each 12,375
FIRE EXTINGUISHERS:
45.00 NS Providing and fixing portable fire extinguishers (dry
chemical powder) suitable for wall mounting including
fixing the same with necessary brackets / clamps /
anchor bolts, drilling holes making good the same
painting the surface as specified
10 Kg. 5 7219 Each 36,094
5 kg. 5 4125 Each 20,625
46.00 NS Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end) :100 mm dia
nominal bore 0 14438 Each -
47.00 NS Supplying and erecting ISI mark Centrifugal water
pump (Monoblock), 415V, three phase 50 cycles
A.C.supply of 12.5 HP with discharge of 7/19.6
discharge/liters per second (LPS) for head of 20 / 48
mtrs and 80 mm suction/ 65 mm delivery pipe of size
or with discharge 20 / 33.5 Liters per second (LPS)
for head of 18 / 30 m and 100 mm suction/ 100 mm
delivery pipe of size, on provided c c foundation as
per specification No. WP-CGP 0 59052 Each -
48.00 NS Supplying and erecting ISI mark Centrifugal water
pump (Monoblock),415 V, three phase 50 cycles
A.C.supply of 15 HP with discharge 10.5 /19.4 Liters
per second (LPS) for head of 30 / 54 m and 80 mm
suction/ 65 mm delivery pipe of size or with discharge
of 17.5 / 36.8 Liters per second (LPS) for head of 18 /
36 m and 100 mm suction/ 100 mm delivery pipe of
size, on provided c c foundation as per specification
No. WP-CGP 0 66183 Each -
49.00 NS Supplying and erecting ISI mark submersible pump
set suitable for erection on open well of required HP
with 415 V, three phase 50 cycles A.C. supply having
discharge from 400 to 1000 lpm (Max. efficiency at 29
m head & 680 ltr discharge) & delivery pipe of
necessary dia. erected with necessary H type clamps
as per specifications no. WP-OSP 0 30770 Each -
50.00 NS Providing and fixing 15 mm ( 1 1/2") Hot and Cold
Bath Mixer of approved make with crutch including
overhead shower arm and downpour spout etc as
directed. 2 7013 Each 14,025
51.00 NS Providing and fixing in position PVC rain water pipes
including all fittings and accessories, making joints /
connections water tight with solvent cement,
scaffolding, making good the damages if any etc.
complete as specified and directed.
150 mm dia 10 490 Each 4,898
Total: Non-Schedule Items: 1,580,886
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
IV ELECTRICAL WORK
A WIRING:
Schedule Items:
1 1.7 Wiring for circuit/ submain wiring alongwith earth wire
with the following sizes of FRLS PVC insulated
copper conductor, single core cable in surface/
recessed steel conduit as required.
1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 600 206.00 RMT 123,600
1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 300 237.00 RMT 71,100
2 1.3 Wiring for light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed
steel conduit, with modular switch, modular plate,
suitable GI box and earthing the point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core
cable etc. as required.
1.3.1 Group A 190 702.00 Point 133,380
3 1.5 Wiring for light / power plug with 2X4 sq. mm FRLS
PVC insulated copper conductor single core cable in
surface / recessed steel conduit alongwith 1 Each 4
sq. mm FRLS PVC insulated copper conductor single
core cable for loop earthing as required. 30 239.00 RMT 7,170
4 1.6 Wiring for light / power plug with 4X4 sq. mm FRLS
PVC insulated copper conductor single core cable in
surface/ recessed steel conduit alongwith 2 Eachs. 4
sq. mm FRLS PVC insulated copper conductor single
core cable for loop earthing as required. 30 366.00 RMT 10,980
1.23 Supplying and fixing following piano type switch/
socket on the existing switch box/ cover including
connections etc. as required.
1.23.1 5/6 A switch 10 34.00 Each 340
5 1.23.2 2 way 5/6 A switch 10 39.00 Each 390
1.23.3 5/16 A switch 10 75.00 Each 750
1.23.4 3 pin 5/6 A socket outlet 10 42.00 Each 420
1.23.5 6 pin 15/16 A socket outlet 10 86.00 Each 860
1.23.6 Telephone socket outlet 10 55.00 Each 550
1.23.7 TV antenna socket outlet 10 48.00 Each 480
1.23.8 Bell push 10 47.00 Each 470
1.24 Supplying and fixing following modular switch/ socket
on the existing modular plate & switch box including
connections but excluding modular plate etc. as
required.
1.24.1 5/6 A switch 190 84.00 Each 15,960
6 1.24.2 2 way 5/6 A switch 10 99.00 Each 990
1.24.3 15/16 A switch 15 114.00 Each 1,710
1.24.4 3 pin 5/6 A socket outlet 15 81.00 Each 1,215
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
1.24.5 6 pin 15/16 A socket outlet 15 153.00 Each 2,295
1.24.6 Telephone socket outlet 3 96.00 Each 288
1.24.7 TV antenna socket outlet 0 97.00 Each -
1.24.8 Bell push 2 114.00 Each 228
1.25 Supplying and fixing two module stepped type
electronic fan regulator on the existing modular plate
switch box including connections but excluding
modular plate etc. as required. 10 288.00 Each 2,880
7 1.27 Supplying and fixing following size/ modules, GI box
alongwith modular base & cover plate for modular
switches in recess etc. as required.
8 1.27.1 1 or 2 Module (75 mmX75 mm) 5 175.00 Each 875
1.27.2 3 Module (100 mmX75 mm) 5 185.00 Each 925
1.27.3 4 Module (125 mmX75 mm) 12 205.00 Each 2,460
1.27.4 6 Module (200 mmX75 mm) 10 258.00 Each 2,580
1.27.5 8 Module (125 mmX125 mm) 40 297.00 Each 11,880
1.27.6 12 Module (200 mmX150 mm) 5 344.00 Each 1,720
1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN
Cable in the existing surface/ recessed Steel/ PVC
conduit as required.
9 1.53.1 1 run of cable 300 34.00 RMT 10,200
1.53.2 2 run of cable 0 59.00 RMT -
1.53.3 3 run of cable 0 84.00 RMT -
Total: Schedule Items: 406,696
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
B LIGHT FIXTURES & ACCESSORIES:
Eachtes:
a) Items are including of Supply, Installation, Testing,
Commissioning, Accessories (Pin, Socket, Adopter,
Connecting Wires) etc.
b) Light fixtures shall be of Surfaced or Recessed
type
c) Contractor will handover photocopy of
Manufacture's Gaurantees to the Client for records.
d) Light fixtures shall be of Approved Brands and
minimum 4 star energy rating only
Non-Schedule Items:
1 NS LED Fixtures:
a) 12 Watt 10 400.00 Each 4,000
b) 18 Watt 120 750.00 Each 90,000
2 NS LED Tube Lights:
a) 12 Watt 10 500.00 Each 5,000
b) 22 Watt 10 900.00 Each 9,000
3 NS Ceiling Fans:
a) 900mm Dia sweep 0 2,500.00 Each -
b) 1200mm Dia sweep 50 3,000.00 Each 150,000
4 NS Exhaust Fans: With Frames
a) Wall Mount: 300mm Dia sweep (Metallic/PVC) 5 2,000.00 Each 10,000
b) Window Mount: 150mm Dia sweep (PVC) 5 1,000.00 Each 5,000
Total: Non-Schedule Items: 273,000
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
C PANELS, D.B. AND MISCELLANEOUS:
Non-Schedule Items:
1 NS Supply, Installation, Testing & Commissioning of the
the following totally enclosed, floor/ wall mounting
cubicle type panels / SMDBs / DBs, fabricated with 16
SWG CRCA sheet steel epoxy + polyester power
coated after seven tank process, having dust-proof
and vermin proof neoprene gaskets and hinged doors
with all accessories, complete with internal wiring &
internal accessories such as DIN rails, neutral links,
earth bar, earthing lugs etc, housing following
switchgears, as links, earth bar, earthing lugs etc.
houseing following switchgears, as per technical
specifications and schematic drawings enclosed.
Eachte:
i) Neutral bars & Earth bars shall have 2 spare ways
for each phase
ii) All MCBs will be C curve type unless & otherwise
mentioned.
iii) All MCCBs will have thermo-magnetic release &
will be provided with operating handles.
iv) All MCCCBs will be provided with one set of
auxiliary Each / NC contact & shunt trip coil.
a) 630A 36KA 3P MCCB + BNL 0 360,431 Set -
2 NS Distribution Board, weather proof, with 1 Each 32 A
/63A TPN MCB incomer, 3 Eachs. 40A 30mA DP
MCB & ELCB's, Brass Neutral Bars, Brass Earth
Bars, Outgoings SP MCBs of suitable ratings as
specified.
a) 6 Way TPN DB with 18 Eachs. 10A SP MCBs 1 13,000 Set 13,000
b) 12 Way TPN DB with 36 Eachs.10A SP MCBs 2 17,000 Set 34,000
Total: Non-Schedule Items: 47,000
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
D CABLING, EARTHING AND MISCELLANEOUS:
Schedule Items:
1 4.1 Supplying and installing following size of perforated
painted with powder coating M.S. cable trays with
perforation Eacht more than 17.5%, in convenient
sections, joined with connectors, suspended from the
ceiling with M.S. suspenders including bolts & nuts,
painting suspenders etc. as required.
4.1.4 300 mm width X 50 mm depth X 1.6 mm thick 3 526.00 RMT 1,578
4.1.6 450 mm width X 50 mm depth X 2.0 mm thick 2 782.00 RMT 1,564
4.1.7 600 mm width X 50 mm depth X 2.0 mm thick 2 950.00 RMT 1,900
2 5.6 Earthing with copper earth plate 600 mm X 600 mm X
3 mm thick including accessories, and providing
masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 meter long etc.
with charcoal/ coke and salt as required. 2 8,289.00 Set 16,578
3 5.10 Providing and fixing 25 mm X 5 mm copper strip earth
conductor in 40 mm dia G.I. pipe from earth electrode
including connection with brass nut, bolt, spring,
washer excavation and re-filling etc. as required. 10 872.00 RMT 8,720
4 5.17 Providing and fixing 4.00 mm dia copper wire on
surface or in recess for loop earthing as required. 25 87.00 RMT 2,175
5 14.14 Providing, laying and fixing following dia RCC pipe
NP2 class (light duty) in ground complete with RCC
collars, jointing with cement mortar 1:2 (1 cement : 2
fine sand) including trenching (75 cm deep) and
refilling etc. as required.
14.14.1 100 mm dia 0 355.00 RMT -
14.14.2 150 mm dia 0 405.00 RMT -
14.14.3 250 mm dia 0 478.00 RMT -
Total: Schedule Items: 32,515
Non-Schedule Items:
6 NS Supply, Installation, Testing & commissioning of
1100V, solid multi stranded copper/Aluminium
conductor, PVC / XLPE sheated cables to IS 1554 (Pt-
l) latest, cables cleated to wall/ceiling or within cable
risers etc. including supply & fixing at aluminium
clamps, aluminium cable tags at every 15 mts
hardware etc.
a) 3.5 Cx300 Sq.mm AL XLPE Armoured 0 1,100.00 RMT -
b) 3.5 Cx185 Sq.mm AL XLPE Armoured 50 600.00 RMT 30,000
c) 4 C x 25 sq.mm Copper Armoured 400 400.00 RMT 160,000
d) 4 C x 10 sq mm Copper Armoured 0 300.00 RMT -
e) 3C x 2.5sqmm Copper Armoured 0 70.00 RMT -
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
7 NS End Termination of the following sizes of 1100V
grade, armoured, aluminium/copper conductor, PVC
insulated and sheathed cables with single
compression brass cable gland with Ni, Cd Plating &
crimping type Copper lugs
a) 3.5 Cx300 Sq.mm AL XLPE Armoured 0 1,200.00 Each -
b) 3.5 Cx185 Sq.mm AL XLPE Armoured 2 650.00 Each 1,300
c) 4 C x 25 sq.mm Copper Armoured 4 450.00 Each 1,800
d) 4 C x 10 sq mm Copper Armoured 0 350.00 Each -
e) 3C x 2.5sqmm Copper Armoured 0 150.00 Each -
8 NS Supply & Installation of following sizes of heavy duty
PVC Conduits including all accessories, fittings, etc,
to be laid on surface for ceiling / concealed in walls.
a) 25 mm dia flexible 50 50.00 RMT 2,500
9 NS Supply & Installation of UPVC pipes, with smooth
fittings, of 10kgf grade including excavation,
backfilling etc of the soil.
150 mm dia 50 450.00 RMT 22,500
50 mm dia 400 200.00 RMT 80,000
-
10 NS Supply & Laying of rubber matt 6.5mm thk 1 250.00 No 250
11 NS Supply, installation, commissioning & testing 9 meter
steel tubular pole with w/p junction box with
foundation for street lighting and the pole shall be
silver painted 0 9,100.00 -
12 NS LED Street Lights (Outdoor Waterproof quality) with
wall supporting arm pipes
80 watts 0 4,000.00 Each -
13 NS Supply installation , testing & commissioning 40W
bulkhead fitting on terrace wall 11 700.00 Each 7,700
-
14 NS Supply installation , testing & commissioning 26/30W
small bollard light fitting with luminaire 11 4,000.00 Each 44,000
Total: Non-Schedule Items: 350,050
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
E T.V, TELEPHONE, DATA SYSTEM:
Schedule Items:
1 1.21 Supplying and fixing of following sizes of medium
class PVC conduit along with accessories in
surface/recess including cutting the wall and making
good the same in case of recessed conduit as
required.
1.21.2 25 mm dia 50 69.00 RMT 3,450
2 1.24 Supplying and fixing following modular switch/ socket
on the existing modular plate & switch box including
connections but excluding modular plate etc. as
required.
1.24.1 5/6 A switch 5 84.00 Each 420
1.23.2 2 way 5/6 A switch 5 99.00 Each 495
1.23.3 15/16 A switch 0 114.00 Each -
1.23.4 3 pin 5/6 A socket outlet 0 81.00 Each -
1.23.5 6 pin 15/16 A socket outlet 0 153.00 Each -
1.23.6 Telephone socket outlet 0 96.00 Each -
1.23.7 TV antenna socket outlet 0 97.00 Each -
1.23.8 Bell push 0 114.00 Each -
3 1.19 Supplying and drawing co-axial TV cable RG-6 grade,
0.7 mm solid copper conductor PE insulated, shielded
with fine tinned copper braid and protected with PVC
sheath in the existing surface/ recessed steel/ PVC
conduit as required. 100 29.00 RMT 2,900
4 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN
Cable in the existing surface/ recessed Steel/ PVC
conduit as required.
1.53.1 1 run of cable 10 34.00 RMT 340
Total: Schedule Items: 7,605
Non-Schedule Items:
5 NS Supply and Installation of KRONE type Telephone tag
blocks with M. S. enclosure complete with
terminations.
a) 20 Pair 6 2,200.00 Each 13,200
b)10 Pair 4 900.00 Each 3,600
6 NS Supply & Installation of CU Conductor Armoured
Cable
a) 10 pair armoured Cable 100 300.00 RMT 30,000
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
7 NS Supply and installation of following sizes M.S. junction
boxes
150mm x 150mm x 50mm 10 450.00 Each 4,500
300mm x 300mm x 50mm 10 750.00 Each 7,500
600mm x 600mm x 50mm 10 1,800.00 Each 18,000
-
8 NS Supply & Installation of RJ45 jack including
termination of 4 pair cat 6 cable 6 350.00 Each 2,100
Total: Non-Schedule Items: 78,900
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
F IT WORK (HUB AND SERVER):
Supply, Installation, Testing and Commissioning
of the followings:
Schedule Items:
1 1.19 Cat 6 - Category 6 Cable - (Box of 305M) 11 8,845.00 Box 97,295
2 1.19 Patch Cord Cat 6 - 7 feet - Blue 800 203.00 Each 162,400
3 1.19 Patch Cord Cat 6 - 15 feet - Blue 25 435.00 Each 10,875
Total: Schedule Items: 270,570
Non-Schedule Items:
4 NS Information Outlet Cat 6 - Blue 10 290.00 Each 2,900
5 NS Dual Face Plate (White), L-Type 235 560.00 Each 131,600
6 NS 24 Port Cat 6 Jack Panel. 220 131.00 Each 28,820
7 NS 3 SC Duplex Adapter Plate 2 800.00 Each 1,600
8 NS SC Duplex Coupler 9 120.00 Each 1,080
9 NS SC Connector 18 120.00 Each 2,160
10 NS SC to LC Duplex Fiber Patch Cord - 50 Micron - 10
feet 5 800.00 Each 4,000
11 NS 400 Pair MDF with 35 Nos 10 pair Disconnect Module
0 42,000 Set -
12 NS Network Rack 42U Tall,800 MM X 800 MM Depth with
front glass door and rear perporated door, 2 Nos of
5/15 amps 12 Sockets Vertical A.C. Channel, Fan
Housing unit complete with 4 nos. 90 CFM Fans, 4
Pkts Mounting Hardware set of 20 each, 2 nos X
100mm X 100mm Vertical PVC Cable Manager 42U
size. 2 nos X 300mm Cable Basket. 0 125,000 Set -
13 NS Wall Mount 15U Tall,600 MM X 500 MM Depth with
front glass door, 1 Nos of 5/15 amps 6 Sockets
Horizontal A.C. Channel, Fan Housing unit complete
with 2 nos. 90 CFM Fans, 2 Pkts Mounting Hardware
set of 20 each. 3 49,000 Set 147,000
14 NS 1 U Single Sided PVC Cable Manager 6 3,500.00 Each 21,000
15 NS Supply and laying 6 fiber OM3 10GbE
single/multimode OFC cable 300 400 Rmt 120,000
Total: Non-Schedule Items: 460,160
S. DSR'16 Description Qty Rate UNIT Amount
No. Ref No Rs. P. Rs.
G PA CUM MUSIC SYSTEM WORK:
Supply, Installation, Testing and Commissioning
of the followings:
Non-Schedule Items:
1 NS 6 W /11W ceiling mounted / Wall mounted speakers
with line matching Transformer 6 1,900.00 Each 11,400
2 NS 200 W Booster Amplifier 1 7,000.00 Each 7,000
3 NS 19" Rack suitable to mount Amplifiers with all
accessories. 3 12,500.00 Each 37,500
4 NS Dynamic Goose neck microphone with table top
stand. 3 4,000.00 Each 12,000
5 NS Microprocessor based 8 Zone announcing console
complete,with electronic priority switching module. 1 61,200.00 Each 61,200
6 NS 2 C x 1.5 sq.mm annealed tinned copper conductor
PVC sheathed flexible FRLS wires in pvc conduit 200 62.00 RMT 12,400
Total: Non-Schedule Items: 141,500