DesignD.E.T.CHAIRS L1 are treatment units for
orthodontists and thus particularly suited for treating patients in a lying position. They are characteri-zed by their extraordinary design and ergonomic functionality.
The instruments of the version L1-S300 are attached to the swi-velling device control box, which can either be positioned on the doctor’s side or on the assistant’s side. This concept supports the option of treatment without assistance.
The L1-H300 version enables treat-ment from behind the chair using instruments on telescopic rails, which are integrated in a row of cupboards.
The small and large suction tubes are part of the basic version of the L1 S300 and the L1 H300. Additionally, the doctor’s device can be equipped with three further instruments and a function syringe.
Optionally, a cuspidor, a height-adjustable tray, a multimedia system and the D.light operating lamp are available.
ErgonomicsErgonomics is high on our list of
priorities: everything the dentist or the assistant needs is within easy reach, which enables a relaxed treatment process. The space-saving L1 units also fit into the smallest rooms.
The small and large suction tubes are part of the basic version of the L1-ECO. Additionally, the doctor’s device can be equipped with one further instrument – a light micro-
motor or a turbine connection – and also with a function syringe.
Optionally, a cuspidor, a height- adjustable tray, a multimedia
system and the D.light operating lamp are available.
The L1-ECO is a flexible workplace who-se doctor’s device can be swivelled to the doctor’s side as well as to the assistant’s side.
This variable-positioning feature ensures convenience in all treatment positi-ons.
A personal touchL1 units have an elegant and timeless
design. With their attractive com-bination of stainless steel and glass you can add a personal touch to the treatment room. The L1-C500 thrills with its simple technology and all its functions are easy to control, which allows you to work efficiently. Pre-cise workmanship and top quality ensure maximum operational safety.
The freely configurable doctor’s device can be equipped with up to three air-powered instruments and, additionally, with one light micromotor, one ultrasonic scaler and one function syringe.
Optionally, the cuspidor, the swi-velling and height-adjustable tray, the multimedia system and the operating lamp D.light are available.
The soft upholstery of the L1 units allows your patient to lie comfor-
tably, even during longer treat-ments.
FunctionThe numerous options for positio-
ning the doctor’s and assistant’s elements support treatment with or without assistance. Intelligent operating concepts are consistent-ly implemented with the swivelling arm versions as well as with the cart versions.
The L1-S600Plus allows you to ergo-nomically carry out treatment on a lying patient from the 9 o’clock to the 12 o‘clock position.
All the functions can be activated via the foot starter, such as the intraoral camera, the ImplantMed-motor, programmes for the controllable instruments, variable speed control for the motors, and the D.light unit lamp.
Also available as a cart version
Brushless W&H-motors [EA50LT] 300 – 40,000 rpm
3 programmes for each controllable instrument; speed: variable or preconfigured
ImplantMed-motor with pump for physiological saline solution can be integrated
Exact torque limitation of the implantology motor of 5 – 50 Ncm
Smallest lamp with the greatest effect Protected design and patented heat
dissipation system 25,000 LUX, 5,000 K Focusable light beam Black plastic lamp handle, can be
retrofitted Protective cap on the handle can be
removed and sterilized
Flexibility
The filigree operating lamp D.light, which was designed to match the
chairs, is available as a ceiling or unit model.
Water sterilization system (WSS) Available with or without free down-pipe in accordance with the DVGW (German Technical and Scientific
Association for Gas and Water) In accordance with the Drinking
Water Ordinance of 2003 and EN 1717 DIN 88-4
Disinfection of the service water and reduction of germs in it by means of hydrogen peroxide
Automatic monitoring of the sterilization dosing
High-resolution 17“ TFT-monitor with touch-screen
Attached to the treatment unit (approved according to MPG)
The camera can be attached to the doctor‘s or the assistant‘s device.
Patient-oriented image-processing software with VDDS-IV interface (association of German dental software companies)
USB2-port for connection to a PC.
Dürr Vista-Cam Camera Multistage autofocus with
corresponding depth of focus
Ergonomics
The upholstery of the arm rests is made of soft foam and the material of the cover is particularly soft. The arm rests are pluggable and can also be ordered individually.
Programme keys on the chair; 5 programmes can be stored.
Manually extractable double-jointed head rest
Working properly on the L1
Treating patients in a lying position
gives you a clear view of the
upper and lower jaw. This optimal
working position is ensured by
sufficient legroom. During lower-
jaw treatments the patients are
positioned horizontally; for treat-
ments in the upper-jaw region the
patient’s head is slightly stretched
backwards. The double-jointed
head rest offers stable support for
the patient’s head at the starting
point of the neck muscles. This way
the patient is relaxed and does
not need to constantly adjust his or
her position. Treatment of patients
in a lying position offers you an
optimum view and, consequently
optimum results.
This argument will convince all your
patients!
Highest position: 800 mm Lowest position: 570 mm
The doctor’s / assistant’s chair is available in 2 heights:
54 – 73 cm and 46 – 58 cm.The sloping front of the seat reduces
pressure on the thighs and the arm rest can be adjusted flexibly.
When everything is the same, it’s thedifference that counts.
Is your practice concept really patient friendly?
You will certainly do anything to offer top performance to your patients. Here modern medical technology is important, but you also want to treat your customers in an aesthetic and pleasant environment. During each visit to a doctor, the psyche of the person to be treated plays a very important role. Besides professional craftsmanship the result should also be a feeling of harmony on the part of the patient. This perfect aesthetics is achieved.
The first thing the patient does is to visualize the environment, which he or she has to enter repeatedly in the course of the treatment. It is important to turn any fears into positive feelings – and this not only applies to children.
The treatment unit L1 for prophylaxis and orthodontic treatments gives the patient a feeling of security.
The unique design conveys the impres-sion: “Here nothing can happen to me”.
The soft upholstery offers a highly comfortable lying position and your patients will happily make their next appointment with your practice.
The Company
DKL is a forward-looking, innovative company that was founded in 1985. We beca-me known for the service of repairing dental chair uphols-tery. Likewise, X-ray protection articles have been part of our product range since the very beginning. Since 1997 we have been developing and producing our own treatment units.
The simple elegance of the new building inaugurated in 2006 reflects the design concept of our units. Among other things, it houses the new plant for the production of our D.E.T.CHAIRS and a representative exhibition area comprising 300 m2.
Thanks to its modern machine-ry, DKL offers a comprehensive range of services, from design, through tool-making, up to the finished product. Our design team works with state-of-the-art 3D-technology. The programs created at the computer are transferred directly to the respec-tive processing centres in the production department.
The upholsteries are available in 50 colours.
Made in Germany – this is still an ex-pression for high-grade products, which DKL markets world-wide.
DKL CHAIRS GmbH is naturally a certified company, and our medical products bear the CE-mark in accordance with EN ISO 13485:2003.
Go for the future –Go for innovation and design –Go for treatment units from DKL!
With our technically ultramodern CNC machines, we not only produce parts for our own production; we also serialize tools and forms for new upholstery parts from other manufacturers. In the D.E.T.CHAIRS product range, our stainless-steel treatment units for dentists and orthodontists are manufactured. We make top-quality customized as well as serial products.
DKL CHAIRS GmbH
An der Ziegelei 1+3 · D-37124 Rosdorf Phone +49 (0)551-50 06 0 Fax +49 (0)551-50 06 296 www.dkl.de · [email protected]
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e. P
leas
e no
te th
at th
e pr
inte
d co
lour
s are
not
exa
ct re
prod
uctio
ns.
Som
e of
the
phot
os sh
own
in th
e br
ochu
re c
onta
in o
ptio
nal p
rodu
ct fe
atur
es. M
arch
200
9 iss
ue
© m
exx4
Digi
tale F
otoWe
rbun
g