Protect, Maintain, Renovate, Decorate...
www.owatrol.com
© Philippe Simier
NEW WOOD (vertical/horizontal)
SOFT (Larch, Douglas Fir, Red Cedar, etc) HARD
(Ipe, Teak, Locust Tree, etc)
THERMOHEATED THTPRESSURE TREATED
WOOD NON-PRESSURE TREATED WOOD
MOISTURE CONTENT ≥ 18 %
• Stabilisation essential with SEASONITE® for minimum 6 months
• Finish: TEXTROL®, SCS or AQUADECKS®
MOISTURE CONTENT ≥ 18 %• Preserve with SANIXYL*
(except Red Cedar) • Stabilisation essential with
SEASONITE® for minimum 6 months
• Finish: TEXTROL®, SCS or AQUADECKS®
MOISTURE CONTENT ≥ 18 %Directly on new wood
• Preserve with SANIXYL* (If necessary)
• Finish: AQUADECKS®
1st solution Directly on new wood:
AQUADECKS® (wait one year for Iroko)
2nd solution Wait 6 months
(wait one year for Iroko)• Finish: D.1 or SCS
3rd solution • Deglaze with AQUANETT® • Neutralise with NET-TROL® • Finish: D.1 or SCS
Directly on new wood: AQUADECKS®
GREYED WOOD ‘‘greyed surface’’
SOFT HARD THERMOHEATED THT
• Clean with NET-TROL® • Finish: TEXTROL®, AQUADECKS® or SCS
• Clean with NET-TROL® • Finish: D.1, AQUADECKS® or SCS
• Clean with NET-TROL® • Finish: AQUADECKS® or SCS
STAINED, PAINTED VARNISHED OR OILED WOOD ‘‘encrusted with dirt’’
STAINED, PAINTED, VARNISHED OILED STAINED OILED STAINED, PAINTED,
VARNISHED
• Strip with DILUNETT®***
• Remove oil with AQUANETT®**
• Strip with DILUNETT®***
• Remove oil with AQUANETT®**
• Strip with DILUNETT®***
• Remove oil with AQUANETT®**
• Neutralise with NET-TROL® • Finish: TEXTROL®, AQUADECKS® or SCS
• Neutralise with NET-TROL® • Finish: D.1, AQUADECKS® or SCS
• Neutralise with NET-TROL® • Finish: AQUADECKS® or SCS
The Owatrol ‘‘outdoor’’ solutions
New wood can be soiled or fouled by various operations before its arrival on site. Cleaning is always recommended.** Except on Oak and Chestnut. *** Except on Oak, Chestnut and Red Cedar.
• Preventive - curative / interior - exterior. • Ready to use - colourless - Long term preservation. • Effective for usage classes 1, 2, 3a.
INSECTICIDE, FUNGICIDE, ANTI-TERMITE, ANTI-BLUE STAIN (on wood already laid)
SANIXYL* 1 - 2,5 - 10 litres
APPLICATION TEMPERATURE
+35°C+ 5°C
CLEAN-UP
WATERImmediately after use
5-10 m2/l
COVERAGEPREVENTIVE
WORKING TIME
24-48 h3 m2/l
COVERAGECURATIVE
APPLICATION TOOLS
PRESERVING WOOD
* Use biocides with caution. Read the label and the product information before use.
* Hazardous - Follow the safety instructions.
SPECIAL COMPOSITES
FILLING
• Removes all types of dirt (stains, grease, pollution...). • Rapid action without effort: by simply rinsing. • Ideal for grooved decking, garden furniture, etc. • Does not attack plastics, swimming pool liners, plants, etc.
CLEANER DEGREASER FOR COMPOSITE WOODCOMPO-CLEAN* 1 - 2,5 - 15 litres
APPLICATION TEMPERATURE
+35°C+ 5°C
CLEAN-UP
WATER5-10 m2/l
COVERAGE WORKING TIME
5 min
APPLICATION TOOLS
COLOUR REVITALISER FOR COMPOSITE WOODCOMPO-CARE 1 - 2,5 litres
• Waterproofing protection + Anti-stain barrier (oil, grease, etc).
• Restores colour to composites (decks, weatherboarding, garden furniture).
• Available in:
BROWNGRAY
APPLICATION TOOLS
APPLICATION TEMPERATURE
+35°C+ 5°C
TOUCH-DRY /TIME BEFORE USE
1 h /12-24 h± 15 m2/l
COVERAGE PER COAT
CLEAN-UP
WATER
• Fills holes, cracks, etc.• Hardens in 10 min without shrinking. • Compatible with all types of finishes: Stains,
paints, saturating oils, etc. • Colour : pine.
TWO-PACK WOOD FILLERCOSMOBOIS 500 g
1 2
3 4
Apply AQUANETT® to dry wood.Leave 5 min. Scrub and rinse with water.
Apply NET-TROL® while wood is wet. Allow to work 10/20 min.
Rinse with water.
2
3 4
1
Apply NET-TROL® to wet wood. Wait 10/20 min. Scrub and rinse with water
Works in 5 m
in
Removes oil from wood: All wood can darken because of unsuitable protection (linseed oil, teak, etc) from the effect of water/UV cycles. It is the “encrusted dirt“.• Deep removal of darkened oils and stains. Makes them
water soluble. • Biodegradable formula. Gel consistency. • Can also deglaze wood in a few minutes. • Ideal for chalets, weatherboarding, decking, garden
furniture, etc.
OIL REMOVER/ CLEANER FOR ALL WOODS** AQUANETT®* 1 - 2,5 - 10 litres
* Hazardous - Follow the safety instructions ** Except Oak, Chestnut, Red Cedar and marquetry *** Except aluminium
APPLICATION TEMPERATURE
+35°C+ 5°C
CLEAN-UP
WATER5-10 m2/l
COVERAGE WORKING TIME
5 min
APPLICATION TOOLS
• Cleans ‘‘greyed wood’’ (grey surface) in 10-20 min. Dirt and residual traces of iron sulphate, etc.
• Also use on stone and green-stained PVC. • Removes recent traces of tannin. • Neutralises surfaces after using DILUNETT® stripper or
AQUANETT® oil remover.• Ideal for weatherboarding, decking, garden furniture, etc.
WOOD CLEANER AND COLOUR RESTORERNET-TROL®* 1 - 2,5 - 15 litres
APPLICATION TEMPERATURE
+35°C+ 5°C
CLEAN-UP
WATER5-10 m2/l
COVERAGE APPLICATION TOOLS
WORKING TIME
10-20 min
Removes up to 8 coats in 1 application
• Strips paint, stains, varnish, etc, without scratching. • Gel consistency. Does not drip or run. • Effective on wood**, PVC, metal***, etc. • Makes the coating water soluble: acts by simply rinsing. • Does not evaporate, does not dry during high temperatures. • Re-activated by wetting.
WATER-BASED STRIPPERDILUNETT®* 0,5 - 1 - 2,5 - 10 litres
APPLICATION TEMPERATURE
+35°C+ 5°C
CLEAN-UP
WATER4 m2/l
COVERAGE APPLICATION TOOLS
WORKING TIME
5 min /12 h
PREPARING WOOD
To avoid this !!!(cracking, splitting or deformation of the wood)
© lmbois.fr
© Weberfoto
PROTECTING WOOD
HIGH QUALITY PENETRATING OIL FOR SOFTWOODSTEXTROL®
1 - 5 - 20 litres
• Nonfilm-forming protection, transparent, matt “oiled appearance”.• Preserves the natural appearance of the wood. • Does not flake or peel. Does not darken with UV exposure. • Easy maintenance - no sanding or stripping. • Chalets, weatherboarding, barriers, garden shelters, decking. • Available in 6 colours that can be inter-mixed:
The colourless one can be coloured, consult us.MATT RUSTIC OAKMATT GOLDEN OAKCOLOURLESS MATT MATT MEDIUM OAK
• Stabilises and protects new wood during its first months of exposure to the weather.
• Regulates the evaporation of moisture from the wood. • Limits greying and prepares wood to receive the finishing coat. • Essential for pressure treated wood. • Used before or after laying, in one single generous coat. • Weatherboarding, chalets, decking, duckboards, etc.
NEW WOOD PROTECTIONSEASONITE®
1 - 2,5 - 15 litres
APPLICATION TEMPERATURE
+30°C+10°C
CLEAN-UP
WATER5-7 m2/l
COVERAGE APPLICATION TOOLS
DRYING TIME
12 h (at 20°C - 50 % HR)
WATER-BASED SATURATING MATT FINISH FOR ALL WOODS AQUADECKS®
1 - 2,5 - 10 litres
• Reinforced UV protection, transparent, non-film forming. • Directly on new wood - Fast drying. • Preserves the natural appearance of the wood.
Does not darken. • All woods: soft, hard, THT, etc. • Does not flake, does not peel. • Easy and fast maintenance - no sanding or stripping. • Decks, duckboards, chalets, weatherboarding, garden furniture, etc.• Available in:
HONEY (wet wood appearance) TEAKMOVINGUI
APPLICATION TEMPERATURE
+30°C+10°C
CLEAN-UP
WATER + SOAP
10-12 m2/l
COVERAGE PER COAT
APPLICATION TOOLS
DRYING TIME
4 h5 m2/l
COVERAGE RATE PER 2 COATS
APPLICATION TEMPERATURE
+35°C+ 5°C
CLEAN-UP
WHITE- SPIRIT
10-12 m2/l
COVERAGEPER COAT
DRYING /DECK CAN BE USED IN
24-48 h /2-3 days5 m2/l
COVERAGERATE PER 2 COATS
APPLICATION TOOLS
MATT CEDAR MATT REDWOOD
© Donnerbold
© lmbois.fr
• Long term protection for all surfaces. • Directly without primer - Excellent resistance to bad weather. • Easy application without brush marks. • Does not flake under the effect of abrasion, including on decks. • Guaranteed against flaking: 5 years for horizontal surfaces and 15 years
for vertical surfaces (refer to the ”guarantee limit” paragraph on the packaging).
• Hard and soft wood - Decks, weatherboarding, chalets, concrete, PVC, etc.
• Available in 52 different colours.
OPAQUE DECORATIVE MATT FINISH FOR ALL SURFACESSOLID COLOR STAIN 1 - 2,5 - 20 litres
• Matt transparent protection, “oiled appearance“. • High resistance to extreme conditions.• Preserves the natural appearance of the wood. Does not darken. • Non-film forming, does not flake, does not peel. • Decks, pontoons, duckboards, garden furniture, weatherboarding, etc.
CLEAR SATURATING OIL FOR HARDWOODSD. 1 - 2,5 - 20 litres
APPLICATION TEMPERATURE
+35°C+ 5°C
CLEAN-UP
WHITE- SPIRIT8-12 m2/l
COVERAGEPER COAT
DRYING TIME /TIME BEFORE USE
24-48 h2-3 days1-4 m2/l
COVERAGE RATE PER 2 COATS
APPLICATION TOOLS
• For an “intense gloss“ finish, apply D.2 after saturation with D.1.• Long lasting flexible film. Does not crack. • No sanding between coats. • Vertical/horizontal (except floor), furniture, cubicle, lounge, etc.
INTENSE GLOSS NAVY VARNISH FOR HARD WOODD.2 1 - 2,5 - 20 litres
APPLICATION TEMPERATURE
+35°C+ 8°C
CLEAN-UP
WHITE- SPIRIT15 m2/l
COVERAGEPER COAT
DRYING TIME /TIME BEFORE USE
12-24 h between each coat/3 days
APPLICATION TOOLS
• Protects and nourishes teak deeply.• Transparent and colourless - “matt oiled“ appearance.
PREMIUM HARDWOOD OILTEAK-OLJE 1 litre
APPLICATION TEMPERATURE
+35°C+ 5°C
CLEAN-UP
WHITE- SPIRIT
10-14 m2/l
COVERAGEPER COAT
TOUCH-DRY 24 h
24-48 h5-7 m2/l
COVERAGE RATE PER 2 COATS
APPLICATION TOOLS
APPLICATION TEMPERATURE
+30°C+ 10°C8-10 m2/l
COVERAGEPER COAT
DRYING TIME
24-48 h
RECOATING TIME
3-4 h
APPLICATION TOOLS
CLEAN-UP
WATER + SOAP
NE N
OIR
CIT PAS AUX
UVDO
ES N
OT DARKEN W
ITH
EXPOSURE
1
Apply.Leave 5 min.
2
Wait 2 hrs.Apply finish.
Specially for
porous surfaces
SURFACE PREPARATION
• Additive for water-based paints. • Blocks and isolates the surface from various stains/traces
of water, soot, smoke (ceiling). • Isolates traces of tannin. Enables oak beams to be painted. • Avoids the oxidation of non-ferrous metals (copper), prevents the
development of verdigris. • Improves the opacity of white with moderate covering power. • Saves time: replaces separate stabilising primer.
FIXES POWDERY AND POROUS SURFACESREDUCES THE RISK OF FLAKING
OWATROL® E-B 1 - 2,5 - 10 litres
• Additive for water-based paints. • Facilitates the glide: enables a ceiling to be painted
effortlessly. • Gives better flow characteristics. • Lubricates the nozzles during application with a spray gun. • Ideal for ceilings, walls, facades...
AVOIDS BRUSH MARKS IMPROVES FLOW OF WATER-BASED PAINTS
FLOETROL®1 - 2,5 - 10 litres
ApplyEnsure that the FLOETROL® is well mixed in.
Add FLOETROL®
directly to the acrylic paint
1 2 3
APPLICATION TEMPERATURE
+35°C+ 5°C
CLEAN-UP
WATER
DRYING TIME
As per paint manufacturers guidlines
APPLICATION TOOLS
• Ideal for: tiles, melamine-coating, glass, PVC, lacquer, varnish, etc.
• Avoids sanding and stripping, etc. • Colourless, does not conceal the surface. • Odourless. • Does not attack the existing base or old coating.• Dry in 2 hours and can be overcoated any time upto
7 days later.
ENABLES THE KEYING OF PAINTS, VARNISHES, ETC... ON ALL SMOOTH/SHINY SURFACES
E.S.P. 1 litre
APPLICATION TEMPERATURE
+35°C+ 5°C18 m2/l
COVERAGE RECOATING TIME
2-7 days
APPLICATION TOOLS
CLEAN-UP
WATER + SOAP
APPLICATION TEMPERATURE
+35°C+ 5°C± 6 m2/l
COVERAGE PER COAT(USED ALONE)
DRYING TIME
2-4 h
RECOATING TIME
4 h (at 20°C - 50 % HR)
APPLICATION TOOLS
CLEAN-UP
WATER + SOAP
© Robert Kelly
© Lya Cattel
www.owatrol.com
250 g - 1 kgCOSMOFER®
• Fills, plugs, closes up, joins, seals, isolates, glues, fixes all surfaces. • Two pack filler. Excellent adhesion - metal, aluminium, wood, stone,
polyester... • Easy to use. Easy to sand - Will not clog the abrasive paper. • Possibility to adjust the setting time according to need. • Once hardened, can be mechanically machined, drilled, tapped, filed,
ground, sawn, screwed, etc. • Can be covered by any type of paint (single or two pack). • Good resistance to heat (+ 120°C), vibrations and chemicals. • Very elastic, does not craze, does not crack, does not foul abrasives.
UNIVERSAL WHITE POLYESTER FILLERFOR WOOD, METALS, PVC, STONE, ETC.
• Cleans red algae without rubbing. • Preventive and curative mosses, lichens, algae, etc. • Facades, roofs, paving, terraces, etc. • Persistent: long term protection. • Does not change the colour of the surface.
MOSS CLEANER WITH LASTING EFFECTATM 007* 2,5 - 10 litres
APPLICATION TEMPERATURE
+30°C+5°C
CLEAN-UP
WATER50-100 m2/l
COVERAGE DILUTED
APPLICATION TOOLS
• Two pack. Fills, plugs, closes up, joins, seals, isolates, glues, fixes, etc.
• Excellent adhesion to the majority of surfaces: metal, aluminium, wood, stone, polyester, etc.
• Very easy to use - easy sanding. • Once hardened, can be mechanically machined, drilled, tapped,
filed, ground, sawn, screwed, etc.• Can be covered by any type of paint (single or two pack)• Good resistance to heat (+ 120°C), vibrations and chemicals. • Very elastic, does not spring, does not crack, does not foul
abrasives.
REINFORCED POLYESTER FILLERWITH INCORPORATED GLASS FIBRES
CHOUKROUT®300 - 600 g
Red algae* Use biocides with caution. Read the label and the product information before use. Hazardous - Follow the safety instructions.
© R
ag
ne K
ab
an
ova
• Reaches the most inaccessible places. • Acts cold from - 30°C à + 50°C. • Lubricates and unblocks assemblies seized up with rust. • Leaves a thick film. • Dissolves dirty oil, removes multiple residues, breaks up rust. • Facilitates machining: avoids the fixing of swarf.
MULTIFUNCTION PENETRATING OIL-LUBRICANT TRANSYL®
Spray 200 - 400 m - Can 250 ml - 1 - 5 - 20 - 60 - 200 litres
DECORATIVE GLOSS PAINTOWATROL® DÉCO 0,5 - 2,5 - 20 litres
• Anti-rust undercoat and topcoat for all surfaces. • Possesses all the properties of OWATROL® OIL:
Directly on the rust - Flexible non-cracking film - Resistant up to + 175°C.• Available in:
WHITE GREY BLACK GREEN BROWN BLUE
APPLICATION TEMPERATURE
+35°C+5°C
CLEAN-UP
WHITESPIRIT
12-15m2/l
COVERAGE DRYING TIME
6 h Recoating time24 h
APPLICATION TOOLS
• Isolating anti-rust topcoat that stops and stabilises rust. • Based on OWATROL® OIL: compatible with all surfaces. • Excellent film-forming quality (adherence, flexible and regular film
that does not flake). • Resistant up to + 175°C.
ALUMINIUM GLOSS PAINT FINISHOWATROL® ALU RA.85 0,5 - 2,5 - 20 litres
APPLICATION TEMPERATURE
+35°C+5°C
CLEAN-UP
WHITESPIRIT18 m2/l
COVERAGE DRYING TIME
4-6 h Recoating time24-48 h
APPLICATION TOOLS
• Brightens up the colour and appearance of tarnished plastics, gel coats.
• Restores the shine and protects polished metals (bronze, copper, stainless, brass, etc), chrome-plated and anodised (aluminium bay windows, verandas...). Regenerates marble, tiling, red hexagonal floor tiles, etc.
Spray 250 ml - 0,5 - 1 - 20 - 200 litresPOLYTROL®
COLOUR RESTORER
APPLICATION TEMPERATURE
+35°C+5°C
CLEAN-UP
WHITESPIRIT18 m2/l
COVERAGE APPLICATION TOOLS
WORKING TIME BEFORE WIPE OFF
10-20 min
PROTECTION & MAINTENANCE OF METALS
Protection and maintenance of metals
APPLICATION TEMPERATURE
+35°C+5°C
CLEAN-UP
WHITESPIRIT18 m2/l
COVERAGE DRYING TIME
12 h Recoating time48 h
APPLICATION TOOLS
1. Penetrating and isolating rust inhibitor directly on rust: • Penetrates up to the healthy metal while driving out air and moisture. • Forms a protective isolating and flexible film. Resistant up to + 175°C. 2. Additive for paints, varnishes and stains with fatty binder: • Dilution: 25 % per litre in first coat or 50 % if the surface is smooth or porous. • Makes oil-based paints, varnishes and stains rust inhibiting.
Eases their application. • Replaces thinners: does not evaporate. • Increases the covering power of the finishing coats. 3. Keying base for all surfaces: pure in the first coat. • Adherence to all smooth surfaces: glass, PVC, ferrous metals and other
metals, etc. • Aluminium, galvanised steel and zinc can be recoated without pickling. 4. Decorative appearance • Preserves the rusty appearance of the surfaces whilstprotecting them.
Spray 300 ml - 0,5 - 1 - 5 - 20 - 60 - 200 litresOWATROL® OILCOLOURLESS MULTIFUNCTION RUST INHIBITOR
STEELUntreated rust
RUST + OWATROL® OIL
Stabilised rust with OWATROL® OIL
STEEL
• Rust inhibitor that can be covered with all types of single pack and two pack paints: polyurethane, epoxy, chlorinated rubber, car paint, etc.
• Ideal for difficult ambient conditions (corrosive vapours, marine environments, etc) - Resistant up to + 175°C.
• Applied to new or highly oxidised surfaces.
OWATROL® C.I.P. 0,5 - 2,5 - 20 litres
APPLICATION TEMPERATURE
+35°C+5°C
CLEAN-UP
WHITESPIRIT15 m2/l
COVERAGE DRYING TIME
6 h Recoating time48-72 h
APPLICATION TOOLS
CORROSIVE INHIBITING PRIMER FOR «EXTREME CONDITIONS»
OWATROL® PRIMER AP.60ANTI-RUST MATT PAINT
0,5 - 1 - 2,5 - 20 litres
• Primer and topcoat - Stops and stabilises rust. • All surfaces - Directly on rust, slightly oxidised metals, PVC, wood, etc. • Flexible film, non-cracking. Anti-UV protection. • Resistant up to temperatures of + 175°C. • Can be covered by paints with a single component glycerophtalic
fatty binder, alkyds-urethanes.• Available in:
WHITE GREY BLACK BRICK RED
APPLICATION TEMPERATURE
+35°C+5°C
CLEAN-UP
WHITESPIRIT
16-20 m2/l
COVERAGE DRYING TIME
6-8 hRecoating time24-48 h
APPLICATION TOOLS
© J
acq
ue
s P
alu
t
© J
acq
ues
Palu
t
Protection and maintenance of metals
FERROUS METALS
iron, cast iron, steel…
NEW SURFACE** PITTED OR
SLIGHTLY RUSTY SURFACE
VERY RUSTY SURFACE
SURFACE COVERED WITH A PAINT IN
POOR CONDITION
COLOURED FINISH WITH
A SINGLE PACK PAINT
1. Degreaser: methylated spirit
2. Protection /decoration: Matt appearance: Primer + finish: OWATROL® PRIMER AP.60 Or Gloss appearance: Primer: OWATROL® PRIMER AP.60 + Finish: OWATROL® DÉCO / RA.85
DIRECTLY ON RUST
Protection /decoration: Matt appearance: Primer + finish: OWATROL® PRIMER AP.60 Or Gloss appearance: Primer: OWATROL® PRIMER AP.60 + Finish: OWATROL® DÉCO / RA.85
1. Metal brushing + OWATROL® OIL
2. Protection /decoration: Matt appearance: OWATROL® PRIMER AP.60 Or Gloss appearance: OWATROL® DÉCO / RA.85
1. Strip with DILUNETT®
2. Protection /decoration: Matt appearance: Primer + finish: OWATROL® PRIMER AP.60 Or Gloss appearance: Primer: OWATROL® PRIMER AP.60 + Finish: OWATROL® DÉCO / RA.85
COLOURED FINISH WITH A TWO PACK
PAINT*
1. Degreaser: methylated spirit
2. Primer: C.I.P. 3. Protection / decoration:
Epoxy, polyurethane, chlorinated rubber, antifouling, coating, primer…
1. Primer: C.I.P. 2. Protection / decoration:
Epoxy, polyurethane, chlorinated rubber, antifouling, coating, primer…
1. Metal brushing 2. Primer: C.I.P.
(2 thin coats) 3. Protection / decoration:
Epoxy, polyurethane, chlorinated rubber, antifouling, coating, primer…
1. Strip with DILUNETT® 2. Primer: C.I.P. 3. Protection / decoration:
Epoxy, polyurethane, chlorinated rubber, antifouling, coating, primer…
NATURAL RUST FINISH
1. Make the surface rusty: (consult us)
2. Protection /decoration: Satin-matt appearance: OWATROL® OILOr Gloss appearance: OWATROL® OIL + D.2
1. Make the surface rusty: (consult us)
2. Protection /decoration: Satin-matt appearance: OWATROL® OIL Or Gloss appearance: OWATROL® OIL + D.2
1. Metal brushing2. Make the surface rusty:
(consult us) 3. Protection /decoration: Satin-matt appearance: OWATROL® OIL Or Gloss appearance: OWATROL® OIL + D.2
The above is meant as a guide only – Please refer to the product packaging or the product Technical Data Sheet for full application instructions.* On Aluminium or for 2 pack finishes, use the appropriate remover. ** If the surface is coated with carbon (calamine) deposits this can turn to rust if left untreated. Treat as for pitted or
slightly rusted surface.
Tours
RC
S 3
31
99
8 4
84
- 0
7/1
2
At your service
1- An internet site: www.owatroluk.com Recommendations: Would you like a quick answer regarding your surface? We will answer your problems 24 h a day and in a few minutes.
Videotheque: nothing better than a video to see the effectiveness and ease of our solutions.
2- Telephone support: +44 (0) 1582 592707 Technicians are there to answer your questions and send you personalised procedures.
3- Regional managers A technician will come to your site, conduct an analysis and draw up a precise specification.
Durieu S.A. 91070 BONDOUFLE - FranceT. +33 (0)1 60 86 48 70 - F. +33 (0)1 60 86 84 84 - [email protected]
OWATROL® is a trademark