GL
OV
ES
& S
LE
EV
ES
505
973
975
Dexterity Even a Rodbuster Could Love
Tactile Sensitivity Plus Gripping Power
3/4 Coverage Lets You Shake Off the Mess
XS / S / M / L / XL / XXL
XS / S / M / L / XL / XXL
S / M / L / XL / XXL
PROTECTION PLUS REMARKABLE DEXTERITY
BETTER FIT BETTER FEEL BETTER PROTECTIONPrimary Jobs
Handling/ Tying Rebar Pipe FittingGripping Sheet MetalMetal FabricationGlass Handling
Primary JobsGripping Sheet Metal & Steel Metal FabricationPipe FittingWorking With Small Parts
Primary JobsWet Applications Concrete WorkGripping Metal & SteelMetal Fabrication
Hand protection for the construction industry has comea long way since the days of big, clumsy leather gloves.
We’ve developed innovations in high tech fibers. Refined palm coatings to the point of ultra thinness. And reengineered to provide a more ergonomic fit.
Today you can count on Worldwide Protective Productsto deliver a glove that perfectly suits the job at hand. Whether that job is hauling steel or tying rebar. Pouring cement, pulling wire or setting stone.
We are a US manufacturer with years of experience in creating high quality personal protective equipment. This catalog gives you a look at our best sellers when it comes to the construction business. But there’s much more.
1409 Worldwide Lane | Wilkesboro, NC 26897Ph 877-678-4568 | wwprotective.com
© 2016 Worldwide Protective Products, LLC. Advanced Technology Armor, ATA and Tasset are registered trademarks of Worldwide Protective Products, LLC. Kevlar is a registered trademark of E.I. du Pont de Nemours and Company. Lycra is a registered trademark of INVISTA.
If we don’t already make the exact glove you need – hard to imagine given our catalog of 2,000+ products – we’ll work with you to design, fabricate and field test a glove to meet your specifications at no extra charge.
The bottom line: you never have to accept “good enough” when there’s a manufacturer who’s ready to work with you. Give your crew the better fit, better feel and better protection that Worldwide Protective Products can deliver.
At Worldwide, it’s our goal to get the right protection into more hands every day.
Your Safety Is In Our Hands
Worldwide Protective Products wwprotective.com
GLOVES & SLEEVES FOR THE JOB AT HAND
Just like the 973 glove, this is a fine gauge HPPE knit for strength and
dexterity. For the 975, we finish 3 /4 of the hand in sanded nitrile. That back-of-the-hand
coverage lets you shake off anything that might stick to the glove. And provides good all-around
protection for your skin. ANSI level A4 cut and abrasion resistance, too.
We start with a fine gauge knit so you can feel your fingers and use them with
skill. We add a sanded nitrile dip to the palms to give you a better grip, especially
useful when you grab something wet or oily. Made with high performance polyethylene (HPPE),
this glove also gives you ANSI level A3 protection against cuts and abrasions.
Because of the fit and flexibility, this glove is the preferred choice of construction
professionals everywhere. Slip it on, and in just a few minutes it will conform itself to your
hand. The secret is in our unique coating; a thin, black hybrid dip that provides tremendous dexterity
plus ANSI level A4 protection. Holds up well against a wide range of chemicals, too.
MATA30-BH M530
MJVATA MATA10-GLO-PD1
550 M13ATP
More Protection Than Most Leather-Palmed Gloves So Fine, You Can Pick Up an O-ring
Heavy Duty Protection From Cuts, Punctures & Heat Cut Protection Plus Visibility You Can’t Miss
Unique Crinkle Surface For A Great Grip Great Value in Cut Protection & Comfort
S / M / L / XL / XXL S / M / L / XL / XXL
S / M / L / XL / XXL S / M / L / XL
S / M / L / XL / XXL S / M / L / XL
OUR HIGHEST LEVEL OF PROTECTION PROTECTION FOR YOUR WHOLE ARMUNIQUE COLORS FOR ADDED BENEFITS
Worldwide Protective Products wwprotective.com
Primary JobsHandling Oily Sheet MetalGripping Heavy / Rolled SteelHVACGlass HandlingMetal Fabrication
Primary JobsHandling Small, Sharp Parts Glass HandlingMetal FabricationGreat as a Liner Glove
Primary JobsA Favorite of Iron WorkersGripping Heavy / Sheet MetalHandling Rolled SteelHigh Heat Areas
Primary JobsGlass HandlingSheet MetalHVAC InstallationFinishing WorkDrywalling
Primary JobsHandling Plate GlassGripping Sheet MetalBrick, Stone + Cinder BlockMetal Fabrication
Primary JobsGlass Handling Utility CompaniesHandling Solar PanelsGreat as a Liner Glove
Primary JobsLaying Carpet Finishing WorkElectrical InstallationHVAC InstallationDrywalling
960Affordable Protection Plus Dexterity XS / S / M / L / XL / XXL
Primary JobsHVAC Installation Sheet MetalGlass Handling
Primary JobsElectriciansHVAC Installation Sheet MetalGlass HandlingHigh Heat Areas
MS1ATA2X2.5
S2X1
Not Too Tight, Not Too Hot
A Rare 8 cal/cm2 Arc-Rated Knit Sleeve
18” (T) to 26” (T)
16” (T) to 26” (T)
There are times when a thick, 10-gauge glove works in your favor. Like handling
plate glass, sheet metal, or sharp-edged stone or other masonry. And there’s more:
We developed a unique crinkle finish for the latex-dipped palm; great for gripping smooth
surfaces, and won’t leave prints. With ANSI level A4 cut and abrasion resistance, these
gloves wear like iron.
Our best-selling leather and canvas glove. It’s heavier than others and
gives your hands ANSI level A5 protection against cuts and abrasions. Good protection
against hot metal, too. Split cowhide reinforces the palm, fingers and knuckles, with a canvas
backing for support. An ATA® knit liner keeps your hands comfortable. Sewn entirely with Kevlar® thread. Safety cuff gives you quick, easy on/off.
The original Boar Hog glove, in 7-gauge knit so your hands breathe
and stay cool. Split leather palm absorbs cutting oil and grease, making it easier to
grip slippery objects. Extra reinforcement in the thumb crotch, the first place most gloves wear
out. Our exclusive ATA® technology delivers ANSI level A6 cut protection; most competitors settle with level 3 or 4 in their knock-offs of this industry favorite.
Get dexterity down to your fingertips in a light weight, form fitting glove. Pick
up razor-sharp parts, and know you’ve got ANSI level A4 protection against cuts
and abrasions. We gave it lots of stretch, using Lycra® fibers with our ATA® Technology.
Added Benefit: Hide-Away color makes it look like new, even after multiple washes. The M530 is also worn as a liner under leather or driver-style gloves.
Instead of a nitrile, we put a polyurethane palm coating on our fine
gauge HPPE glove. The result is ANSI level A3 cut resistance that won’t break the
bank. Polyurethane is slightly thinner, delivering dexterity that lets you pick up screws. The choice
of carpet layers, it protects against both lacerations and abrasions. Also guards against sharp edges when installing HVAC or framing metal studs.
The guy in this photo is a champion power lifter. We’re talking huge arms.
But thanks to the extreme stretch of this sleeve, it fits. It also gives you ANSI level A4
protection in a sleeve so thin, you can almost see through it. Keeps your arm nice and cool.
Great for guys running wire through walls, past HVAC equipment, metal studs and other razor sharp edges. Ideal for handling glass and sheet metal, too.
This sleeve does double duty. Arc rated at 8 cal/cm2 (HRC level 2), it’s great for
electricians installing circuit breakers, generators and more. And with ANSI level A5
cut resistance, workers handling glass and sheet metal count on it to protect them against lacer-
ations. At 5” wide, it can be layered over a shirt or worn on its own. Even fits guys with big arms.
Developed at the request of one of the world’s top construction companies.
This glove lets the guys on the ground wear ANSI level A3 cut-resistant gloves at
all times. Plus it improves hand signal communication between them and the crane
operators up above. For both wearers and co-workers, increased visibility dials up awareness and helps reduce accidents.
A solar company asked Worldwide for a thin, comfortable, cut-resistant glove for
handling plate glass panels. We turned to ATA® technology and developed the M13ATP.
The feel is cool and silky smooth. The protec-tion is ANSI level A2. And the price is remarkably
affordable. Added Benefit: The bright white design makes it a favorite for QC and inspections.