PROTECTS WOOD AGAINST SUNBURN

900

Untreated Stain without with SC® 900

Lignin-and wood stabilizing impregnation with exceptional high UV-protection! SunCare® 900 effectively reduces the decomposition of lignin and the discoloration of wood caused by UV energy. SunCare® 900 protects the lignin substance and stabilizes the interface of wood and coating, providing an excellent bond between the coating and the wood substrate. SunCare® 900 enhances the life time of exterior stain and paint systems.

WoodCare® UV on SunCare® 900

SunCare® 900 � Protects the lignin against photo-oxidative de-

composition � Improves the adhesion and increases the lasting time of

protection treatments � Effective film protection against mildew � Provides a synergetic behavior with WoodCare® and

PerlColor® � Reduces the formation of colored water marks � Water based system - safe and easy to apply � Improves the durability of clear water based lacquers

containing UV-absorbers

PerlColor®®®® - PC-8 on SunCare ®®®®900

SunCare® 900 Water based solvent free wood impregnation.

Generally recommended as pretreatment direct to the wood surface enhancing clear and semi- transparent exterior stain systems.

SunCare® 900 provides with WoodCare® UV a

weather resistant clear finish on natural wood surfaces.

TECHNICAL DATASHEET Art.-Nr.: 20.580 SunCare® 900

Böhme AG, Stationsstrasse 37, 3097 Liebefeld, Switzerland The information and recommendation in this Technical Data Sheet are to the best of our knowledge, information and belief accurate at the date of publication. Nothing herein is to be construed as a warranty, express or otherwise. In all cases, it is the responsibility of the users to determine the applicability of such information or the suitability of any products for their own purpose. Statements or suggestions concerning possible use of our products are made without representation or warranty. All sales of these products shall be subject to Böhme AG’ standard conditions of sale. E-2005 Technical Data Sheet SunCare® 900

Chemical composition Water based solution with organic light stabilizers

Active substance/ fungicides 0.1 – 0.2% IPBC

Color

Slightly yellowish, after reaction with the wood colorless. During the drying time a red or greenish appearance can be observed. This coloring disappears after a few days UV irradiation

Gloss Not applicable (penetrating product)

Drying time Developing time of the light protection 2 - 4h at +20°C

Flash point Not applicable (water based product without V.O.C)

Viscosity 12 Sec. / DIN 4mm

Spec. Gravity 1.00 to 1.02 kg / l

EU (GefStoffV) CH-ChemV.2005 No classification necessary

ADR-RID transportation No dangerous goods

Waste Code VVS 1610

Storage Durability Original containers min. 12 months +22°C temperature

Containers ¾ l / 5 l / 10 l / 25 l / 200 l

Application method Brush-, roller- or spray application

Consumption 100 – 140 g/m2

Cleaning of tools Water

Environmental regulations Mustn’t reach in underground-/ surface water

Security regulations Avoid skin- und eye contact

Application Proposal

Attention: The Light stabilizing additives in this product are water soluble and always must be protected with

WoodCare® UV or PerlColor®.

Surface preparation The subsurface must be sustainable, free of dust, resin and other contaminations

Application suggestion For natural appearance of wooden sidings: 1x SunCare® 900 (LIGNIN-protection) 2x WoodCare® UV (clear finish) or PerlColor®