Note: Please specify individual components when ordering kits Lifetime Warranty on Materials & Workmanship Page 2 Section 6 - PRO LINE DX3301 Series www.ctconline.com DX3301 Series BENTLY TM COMPATIBLE 8 mm Eddy Current / Proximity Probes Temperature Range: - 31º F (-35º C) to 350º F (177º C) Sensitivity - 200 mV/mil (8 V/mm) (1 mil = 0.001”) Wrench flats at cable end of probe body Miniature 12-32 threaded connector Teflon ® jacketed cable Ordering Information Example Part Number: DX330103-05-10-05-02-00 No armor, 50 mm no thread length, 100 mm case length, 0.5 meter total length, mini-coax connector 8 mm probe tip diameter with M10x1 threaded body Probe tip and body sealed to prevent leaking through cable Stainless steel probe body and jam nuts Product Features Protects fluid bearing machines, such as turbines and compressors. Proprietary design makes our probes compatible with industry standards Kits Available • DX3301 (Proximity Probe) • DX330130 (Extension Cable) • DX330180 (Driver) Includes: Example Kit Part Number : KT-DX3301-05-1A Specifications Standard Cable Shown Armored Cable Shown DX3301 0 0 Case Thread Total Length Connector Regulatory Approval No Thread Length Case Length 03 = M10x1, no armor 04 = M10x1, armor 02 = 20 mm 03 = 30 mm 04 = 40 mm 05 = 50 mm 06 = 60 mm 07 = 70 mm 08 = 80 mm 10 = 100 mm 12 = 120 mm 14 = 140 mm 16 = 160 mm 18 = 180 mm 20 = 200 mm 22 = 220 mm 25 = 250 mm 05 = 0.5 meter 10 = 1.0 meter 50 = 5.0 meter 90 = 9.0 meter 01 = mini coax, with connector protector 02 = mini coax 00 = None - - - - - B B C C A A Order Increments: 10mm Length Configuration: Max. No Thread Length: 230 mm Min. No Thread Length: 0 mm Example: 08 = 80 mm 120= 120 mm
Transcript
Note: Please specify individual components when ordering kits
Lifetime Warranty on Materials & WorkmanshipPage 2
Sectio
n 6
- P
RO
LIN
ED
X33
01 S
erie
s
www.ctconline.com
DX3301 SeriesBENTLYTM COMPATIBLE 8 mm Eddy Current / Proximity Probes
Temperature Range: - 31º F (-35º C) to 350º F (177º C) Sensitivity - 200 mV/mil (8 V/mm) (1 mil = 0.001”)Wrench flats at cable end of probe bodyMiniature 12-32 threaded connectorTeflon® jacketed cable
Ordering Information
Example Part Number: DX330103-05-10-05-02-00No armor, 50 mm no thread length, 100 mm case length, 0.5 meter total length, mini-coax connector
8 mm probe tip diameter with M10x1 threaded body
Probe tip and body sealed to prevent leaking through cable
Stainless steel probe body and jam nuts
Product FeaturesProtects fluid bearing machines, such as turbines andcompressors. Proprietary design makes our probes compatible with industry standards
Kits Available
•DX3301(ProximityProbe)
•DX330130(ExtensionCable)
•DX330180(Driver)
Includes:
ExampleKitPartNumber:KT-DX3301-05-1A
Specifications
Standard Cable Shown Armored Cable Shown
DX3301 0 0
Case Thread Total Length Connector Regulatory ApprovalNo Thread Length Case Length
03 = M10x1, no armor 04 = M10x1, armor
02 = 20 mm
03 = 30 mm
04 = 40 mm
05 = 50 mm
06 = 60 mm
07 = 70 mm
08 = 80 mm
10 = 100 mm
12 = 120 mm
14 = 140 mm
16 = 160 mm
18 = 180 mm
20 = 200 mm
22 = 220 mm
25 = 250 mm
05 = 0.5 meter
10 = 1.0 meter
50 = 5.0 meter
90 = 9.0 meter
01 = mini coax, with connector protector
02 = mini coax
00 = None
- - - - -B B C C A A
Order Increments: 10mm
Length Configuration:
Max. No Thread Length: 230 mm
Min. No Thread Length: 0 mm
Example: 08 = 80 mm 120= 120 mm
Note: Please specify individual components when ordering kits
Lifetime Warranty on Materials & WorkmanshipPage 3 • 800-999-5290
Sectio
n 6
- PR
O L
INE
DX
330106 Series
BENTLYTM COMPATIBLE 8 mm Eddy Current / Proximity Probes
DX330106 SeriesBENTLYTM COMPATIBLE Reverse Mount 8 mm Eddy Current / Proximity Probes
Specifications
1
1
2
2
3
3
4
4
A A
B B
C C
D D
DRAWN BY
APPROVED BY
DATE
DATE
PART #:
DESCRIPTION:
SHEETTOLERANCES (UNLESS SPECIFIED)MATERIAL
NOT DRAWN TO SCALECTC
CO
NFI
DE
NTI
AL
BREAK ALL SHARP EDGES.010 MAX
XXX `.005XX `.01ANGLE `2~
63
REV
/
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED
1 1
Reverse Mount Probe for Marketing 0
rodgerst 3/2/2009
rodgerst REV DESCRIPTION ECO# DESIGNER APPROVED APPROVAL DATE
Tip Diam. 8mm
"CC"
1.200.20
0.20
0.09
0.14
.44 in(11 mm)
5 mm
5 mm
30 mm
3.6 mm
11 mm2 mm
- - - - -DX3301 0 2 0 6 0 5 3 0 0 0
Example Part Number: DX330106-05-30-05-01-00 Reverse mount with M10 threaded body, 5 mm no thread length, 30 mm case length, 0.5 meter total length, mini coax
Temperature Range: - 31º F (-35º C) to 350º F (177º C)
Sensitivity - 200 mV/mil (8 V/mm) (1 mil = 0.001”)
Case Thread Total Length Connector Regulatory ApprovalNo Thread Length Case Length
06 = reverse mount with M10x1 threaded body
05 = 5 mm
30 = 30 mm
05 = 0.5 meter
10 = 1.0 meter
50 = 5.0 meter
90 = 9.0 meter
02 = mini coax 00 = None
Ordering Information
Specifications
C C
8 mm probe tip diameter with M10x1 threaded body
Probe tip and body sealed to prevent leaking through cable
Stainless steel probe body
Product FeaturesProtects fluid bearing machines, such as turbines andcompressors. Proprietary design makes our probes compatible with industry standards
Kits Available
•DX3301(ProximityProbe)
•DX330130(ExtensionCable)
•DX330180(Driver)
Includes:
ExampleKitPartNumber:KT-DX3301-05-1A
Standard Cable Shown
Lifetime Warranty on Materials & WorkmanshipPage 4
Sectio
n 6
- P
RO
LIN
ED
P10
01 S
erie
s
www.ctconline.com
DP1001 Series8 mm Eddy Current / Proximity Probes
Temperature Range: - 31º F (-35º C) to 350º F (177º C)
Sensitivity - 200 mV/mil (8 V/mm) (1 mil = 0.001”)
Wrench flats at cable end of probeMiniature 12-32 threaded connectorTeflon® jacketed cable
Specifications
8 mm probe tip diameter with M10x1 threaded body
Probe tip and body sealed to prevent leaking through cable
Stainless steel probe body and jam nuts
Product FeaturesProtects fluid bearing machines, such as turbines andcompressors. Proprietary design makes our probes compatible with industry standards
Kits Available
•DP1001(ProximityProbe)
•DC1001(ExtensionCable)
•DD1001(Driver)
Includes:
ExampleKitPartNumber:KT-DA1001
Standard Cable Shown Armored Cable Shown
Note: Please specify individual components when ordering kitsOrdering Information
Example Part Number: DP100103-05-10-05-02-00No armor, 50 mm no thread length, 100 mm case length, 0.5 meter total length, mini-coax connector
DP1001 0 0
Case Thread Total Length Connector Regulatory ApprovalNo Thread Length Case Length
03 = M10x1, no armor 04 = M10x1, armor
02 = 20 mm
03 = 30 mm
04 = 40 mm
05 = 50 mm
06 = 60 mm
07 = 70 mm
08 = 80 mm
10 = 100 mm
12 = 120 mm
14 = 140 mm
16 = 160 mm
18 = 180 mm
20 = 200 mm
22 = 220 mm
25 = 250 mm
05 = 0.5 meter
10 = 1.0 meter
50 = 5.0 meter
90 = 9.0 meter
01 = mini coax, with connector protector
02 = mini coax
00 = None
- - - - -B B C C A A
Order Increments: 10mm
Length Configuration:
Max. No Thread Length: 230 mm
Min. No Thread Length: 0 mm
Example: 08 = 80 mm 120= 120 mm
Note: Please specify individual components when ordering kits
Lifetime Warranty on Materials & WorkmanshipPage 5 • 800-999-5290
Sectio
n 6
- PR
O L
INE
DP
100106 Series
8 mm Eddy Current / Proximity Probes
DP100106 SeriesReverse Mount 8 mm Eddy Current / Proximity Probes
- - - - -DP1001 0 2 0 6 0 5 3 0 0 0
Example Part Number: DP100106-05-30-05-01-00 Reverse mount with M10 threaded body, 5 mm no thread length, 30 mm case length, 0.5 meter total length, mini coax
Temperature Range: - 31º F (-35º C) to 350º F (177º C)
Sensitivity - 200 mV/mil (8 V/mm) (1 mil = 0.001”)
Case Thread Total Length Connector Regulatory ApprovalNo Thread Length Case Length
06 = reverse mount with M10x1threaded body
05 = 5 mm
30 = 30 mm
05 = 0.5 meter
10 = 1.0 meter
50 = 5.0 meter
90 = 9.0 meter
02 = mini coax 00 = None
Ordering Information
Specifications
C C
8 mm probe tip diameter with M10x1 threaded body
Probe tip and body sealed to prevent leaking through cable
Stainless steel probe body
Product FeaturesProtects fluid bearing machines, such as turbines andcompressors. Proprietary design makes our probes compatible with industry standards
Kits Available
•DP1001(ProximityProbe)
•DC1001(ExtensionCable)
•DD1001(Driver)
Includes:
ExampleKitPartNumber:KT-DA1001
Standard Cable Shown
1
1
2
2
3
3
4
4
A A
B B
C C
D D
DRAWN BY
APPROVED BY
DATE
DATE
PART #:
DESCRIPTION:
SHEETTOLERANCES (UNLESS SPECIFIED)MATERIAL
NOT DRAWN TO SCALECTC
CO
NFI
DE
NTI
AL
BREAK ALL SHARP EDGES.010 MAX
XXX `.005XX `.01ANGLE `2~
63
REV
/
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED
1 1
Reverse Mount Probe for Marketing 0
rodgerst 3/2/2009
rodgerst REV DESCRIPTION ECO# DESIGNER APPROVED APPROVAL DATE
![Std Specs Rev 8 Metric [9/25/98 Metric]](https://static.documents.pub/doc/80x56/61ae7e9c0229c362f478fa5d/std-specs-rev-8-metric-92598-metric.jpg)
