+ All Categories
Home > Documents > PSA-HD Engineering-Grade Severe Accident Solution for Real-Time … · 2020. 1. 16. · the...

PSA-HD Engineering-Grade Severe Accident Solution for Real-Time … · 2020. 1. 16. · the...

Date post: 12-Sep-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
A full-scope simulator incorporating severe accident simulation capability can be valuable in providing a single unifying platform for strengthening and integrating onsite emergency response capabilities, such as EOPs, SAMGs, and EDMGs. It is an effective way to meet the challenges of post-Fukushima recommendations and potential new regulations. Leveraging 20+ years of experience integrating various versions of EPRI’s MAAP code into full-scope simulators, GSE has developed an interactive framework and tool for severe accident simulation, PSA-HD, which allows you to: Integrate procedures and guidance to establish a comprehensive strategy for severe accidents. Support development of additional procedures or guidance through experimentation and analysis on the simulator. Respond to multi-unit severe accidents and large scale events. Provide training and qualification of key personnel to implement EOPs, SAMGs, EDMGs and supporting guidelines. Key personnel include licensed operators, accident management staff, and plant management. Support Emergency Planning drills and exercises. Modeling and Scenario Scope PSA-HD can simulate a number of systems in full-scope simulators, covering the range of steady state, design- basis accidents, and severe accidents. Using EPRI’s Modular Accident Analysis Program (MAAP5) systems include: Primary loop and steam generator (PWR) Reactor vessel (BWR) Primary containment, secondary containment, reactor building and turbine building Spent fuel pool In-plant dose distribution Ex-plant or offsite dose distribution The extent of severe accident scenarios simulated can vary significantly. The baseline scenarios delivered with PSA- HD include: Initiating events: large break LOCA, station blackout Mitigation actions: available from the existing simulator Further options include other initiating events and expansion of modeling capabilities for the complete scope of SAMGs and EDMGs. PSA-HD Engineering-Grade Severe Accident Solution for Real-Time Simulators GSE Systems www.gses.com/severe-accident-simulation PSAHD 2D Integrated Graphical Environment
Transcript
Page 1: PSA-HD Engineering-Grade Severe Accident Solution for Real-Time … · 2020. 1. 16. · the simulator. • Respond to multi-unit severe accidents and large scale events. • Provide

A full-scope simulator incorporating severe accident simulation capability can be valuable in providing a single unifying platform for strengthening and integrating onsite emergency response capabilities, such as EOPs, SAMGs, and EDMGs. It is an effective way to meet the challenges of post-Fukushima recommendations and potential new regulations.

Leveraging 20+ years of experience integrating various versions of EPRI’s MAAP code into full-scope simulators, GSE has developed an interactive framework and tool for severe accident simulation, PSA-HD, which allows you to:

• Integrate procedures and guidance to establish a comprehensive strategy for severe accidents.

• Support development of additional procedures or guidance through experimentation and analysis on the simulator.

• Respond to multi-unit severe accidents and large scale events.

• Provide training and qualification of key personnel to implement EOPs, SAMGs, EDMGs and supporting guidelines. Key personnel include licensed operators, accident management staff, and plant management.

• Support Emergency Planning drills and exercises.

Modeling and Scenario Scope

PSA-HD can simulate a number of systems in full-scope simulators, covering the range of steady state, design-basis accidents, and severe accidents.

Using EPRI’s Modular Accident Analysis Program (MAAP5) systems include:

• Primary loop and steam generator (PWR)

• Reactor vessel (BWR)

• Primary containment, secondary containment, reactor building and turbine building

• Spent fuel pool

• In-plant dose distribution

• Ex-plant or offsite dose distribution

The extent of severe accident scenarios simulated can vary significantly. The baseline scenarios delivered with PSA-HD include:

• Initiating events: large break LOCA, station blackout

• Mitigation actions: available from the existing simulator

Further options include other initiating events and expansion of modeling capabilities for the complete scope of SAMGs and EDMGs.

PSA-HD™ Engineering-Grade Severe Accident Solution for Real-Time Simulators

GSE Systems www.gses.com/severe-accident-simulation

PSAHD

2D Integrated Graphical Environment

Page 2: PSA-HD Engineering-Grade Severe Accident Solution for Real-Time … · 2020. 1. 16. · the simulator. • Respond to multi-unit severe accidents and large scale events. • Provide

Engineering-Grade Severe Accident Solution

Powerful Interface for Analysis and Experimentation

JDashboard™ is a graphical user interface for performing interactive simulation and analysis. You may monitor or plot the performance of any internal variables interactively and collect the data for later analysis.

Key interactive simulation features provided are:

• Symbolic access to all data using the variable name

• Dynamic monitoring and display of variables or constants

• Capability to enable or disable modules from execution by calling the name of the module

• Setting of variables/constants to any value

• The ability to take a snapshot and reset to the same conditions without restarting the code

SimTrend™ is a comprehensive data representation program in the HD environment, displaying data in four windows. SimTrend plots current simulation data in a Trend window or XY Plot window. You can compare the previously saved reference data with the current simulation data in an Online V&V window.

GSE’s AST™ automatic scenario testing tool provides an unattended way to execute multiple evaluative tests of the simulator.

SimTrend™ Displaying Two Scenarios

*EPRI (www.epri.com) conducts research and development relating to the generation, delivery and use of electricity for the benefit of the public. An independent, nonprofit organization, EPRI brings together its scientists and engineers as well as experts from academia and industry to help address challenges in electricity, including reliability, efficiency, health, safety and the environment. EPRI does not endorse any 3rd party products or services. Interested vendors may contact EPRI for a license to MAAP5.

PSA-HD™, JDashboard™, SimTrend™, and AST™ are trademarks of GSE Systems, Inc. All other trademarks are the property of their respective owners. The information in this literature is subject to change without notice and is not to be construed as a warranty.

DS.68.VB 06/15

PSAHD

Tel: +1.410.970.7800 Fax: +1.410.970.7999

www.gses.com [email protected]

1332 Londontown Boulevard, Suite 200 Sykesville, Maryland 21784 USA

AST™ Automatic Scenario Test

JDashboard™ Analytical Tool

Scenario #1

Scenario #2


Recommended