PSAgS gegen die thermischen Auswirkungen von Störlichtbögen Flas… · different parameters for...

PSAgS gegen die thermischen Auswirkungen von Störlichtbögen

ArcFlashPPE,Level4,ATPV≥40cal/cm²Open Arc Test Method

Katalog 2017

Arc flash PPE - HRC 4

BSD arc flash software

Software is based on the calculation algorithm of the DGUV-I 203-077 for three-phaseinstallation. Conversational menu guidance and database-assisted preselection ofdifferent parameters for less experienced users. Short circuit current calculation forsimple radial system according to DIN VDE 0102. Supports calculation of the arcenergy, if the necessary short circuit current value doesnt exist. You can choosebetween a simple and exactly calculation method.The simple method allows a small amount of specific system knowledge, works thereforwith higher security additions. Exactly method is more complex, therefor certain securityadditons can be reduced. This can reveal different results, for the exactly method can bearc protection class 1 enough but the simple method could claim class 2.

Special software functions:- selection menus- types of system- protection characteristic lines- system parameter- integrated digital characteristic curves from over 600 NH- and HH-fuses- generation of system labelling (Arc Label)- extended range of functions of the short-current calculation

Values can be saved project-related.Results in form representation.Saving in different file types.

If required, the PPE can be combined, based on the calculation result,in a separate part of the software. The result of your calculation will beshown as integral component of a risk assessment.Besides the arc energy, the required test level of the PPE against electric arcwill be shown as:- protection class 1 (158 kJ)- protection class 2 (318 kJ)- XXX (concrete value in kJ)

Based on the calculation result, you get suggestion for appropriate certificatedPPE against electric arcs, even if they are above class 2, W(LBP) > 320 kJ.

System requirements:- Windows 7 or 8

Description Material number

BSD electric arc - software 4999999

www.bsd-dresden.de 290Seite

Technologie der Visierscheiben fur Gesichtsschutz und Hauben - Technology of visors for face shields and hoods

Die BSD Real View Technology ist eine spezielle Beschich-tungstechnologie des Polycarbonat-Trägermaterials liefert einzigartige optische Eigenschaften und reflektiert die Wär-mestrahlung.

■ Keine Farbe im Visier ■ Realistische Farb-Wiedergabe > 95 %

Bei der täglichen Benutzung erfolgt fast keine Absorption von Lichtbestandteilen durch die Visierscheibe.

■ Keine optische Alterung ■ Lange Lebensdauer, die Tragedauer ist kein Aussonde-

rungskriterium

Special coating technology of the polycarbonate carrier pro-vides unique optical properties and reflects thermal radiation.

■ No colour in the visor ■ Realistic colour reproduction > 95 %

During daily use there is no absorption of light components by the visor.

■ No optical aging of the visor ■ Long life, time is no weed out criteria

Schutz durch Reflexion - Protection by reflection

Beim Absorptionsprinzip werden Polycarbonat-Scheiben mit speziellen farbigen Zusätzen vermischt, die Wärmestrahlung (IR- und UV-Licht) absorbieren.

■ Gelbes oder grunes Visier ■ Der Farbwiedergabindex ist deutlich reduziert.

Bei der täglichen Nutzung wird Sonnen- und Umgebungslicht von der Visierscheibe ständig absorbiert und darin gespei-chert.

■ Die Visierscheibe altert. ■ Sie muss nach einer Frist ausgesondert werden.

Polycarbonate lenses working with absorption principles are mixed with special colour additives that absorb the thermal radition (IR and UV).

■ Yellow or green visor ■ The colour rendering index is significantly reduced.

Daily sunlight and ambient light are constantly absorbed and stored by the visor.

■ The visor is aging. ■ They must be sorted out after a period of time.

Schutz durch Absorption - Protection by absorption

Das Diagramm zeigt das Absorptionsverhalten von Ge-sichtsschutzvisieren in verschiedenen Wellenlängenbereichen des Lichts. Mit der von BSD verwendeten Technologie wird im sichtbaren Spektrum des Tageslichts kaum absorbiert. Bei Wettbewerbsprodukten, die auf die Absorptionstechno-logie setzen, erfolgt auch in diesem normalen Lichtspektrum eine permanente, hohe Absorption. Das Visier altert.

The graph shows the absorption behaviour of visors in diffe-rent wavebands of light. The visible spectrum of daylight is hardly absorbed with the technology used by BSD.Competitor products that rely on absorption technology, have a permanet high absorption even in the normal spec-trum of light. The visor is aging.

Die Scheibe macht den Unterschied! The lense makes the difference!

Gesichtschutz mit farbiger ScheibeFace Shield with coloured lense

Real View Technology

Visier mit - Face shield with

arc flash hood "BSD-Classic", HRC 4, 47.0 cal/cm²

The arc flash BSD Hood permits the user to work at live parts or in the vicinity of live parts.

- arc flash tested according to ASTM F2178, ATPV: 47.0 cal/cm²- also certificated according to ASTM F1506, CSA Z462, OSHA 1910.269- true color visor- visor has no aging- approved for live working- for the highest arc flash protection- with integrated hard hat and bracket- fabric double layer, 350 g/m² (10 oz.yd2) per layer: cotton, antistatic- color navyblue- universal-size


BSD arc protection hood HRC 4, 47.0 cal/cm² 7406996

visor for Hood HRC 4 /HRC 4 Power, with bracket 7406981

arc flash hood "BSD-Classic", HRC 4, 47.0 cal/cm² with ventilation

The arc flash BSD Hood permits the user to work at live parts or in the vicinity of live parts.

- arc flash tested according to ASTM F2178, ATPV: 47.0 cal/cm²- also certificated according to ASTM F1506, CSA Z462, OSHA 1910.269- true color visor- visor has no aging- approved for live working- for the highest arc flash protection- fabric double layer, 350 g/m² (10 oz/yd2) per layer: cotton, antistatic- with integrated Concept-hard hat, ANSI / ISEA Z89.1-2009 Type 1 Class E,

and EU-Slot-bracket- with ventilation system for a air circulation inside the hood- supply unit with belt-strap- color navyyblue- universal-size


BSD arc protection hood HRC 4, 47.0 cal/cm², with ventilation system 7406997

power unit for ventilation system, incl. charger 7406987

hard hat with air duct 7406988

heavy duty pvc hose 7406989


arc flash hood "BSD-Power", HRC 4, 40.0 cal/cm², 12 oz/yd²

The arc flash BSD Hood power permits the user to work at live parts or in the vicinity of live parts.

- Arc-flash-tested according to IEC 61482-1-1: ASTM F2178, ATPV: 40.0 cal/cm²- EN 166, "personal eye-protection requirements"- with CE-labeling- ultra light grammage 410 g/m² (12 oz.yd2)- true color visor- visor has no aging- approved for live working- for the highest arc flash protection- with integrated hard hat and bracket- color greyblue- universal-size


arc protection hood HRC 4 Power, 40.0 cal/cm², 12 oz/yd2 7406980

visor for Hood HRC 4 /HRC 4 Power, with bracket 7406981

arc flash hood "BSD-Power", HRC 4, 40.0 cal/cm², 12 oz/yd² with

The arc flash BSD Hood power permits the user to work at live parts or in the vicinity of live parts.

- Arc-flash-tested according to IEC 61482-1-1: ASTM F2178, ATPV: 40.0 cal/cm²- EN 166, "personal eye-protection requirements"- with CE-labeling- ultra light grammage 410 g/m² (12 oz.yd2)- true color visor- visor has no aging- approved for live working- for the highest arc flash protection- with integrated Concept-hard hat, ANSI / ISEA Z89.1-2009 Type 1 Class E,

and EU-Slot-bracket- with ventilation system for a air circulation inside the hood- supply unit with belt-strap- color greyblue- universal-size


BSD arc protection hood HRC 4 Power, 40.0 cal/cm², with ventilation system 7406986

power unit for ventilation system, incl. charger 7406987

hard hat with air duct 7406988

heavy duty pvc hose 7406989


arc flash BSD gloves, HRC 4, 45.0 cal/cm²

- arc flash tested according to IEC 61482-1-1: ATPV 45 cal/cm²- arc flash testet according to IEC 61482-1-2:2007 class 2

test level W(LBP)= 318 kJ- additional tested with a higher tesl leve W(LBP)= 630 kJ- protection against mechanic risks according to EN 388:2003- protection against thermal risks according to EN 407:2004- back side of glove made of double-textile- perfect fit via soft and flexible leather- excellent delicacy of feeling- no perspiration


BSD arc flash gloves, class 2, 630 kJ, HRC 4, 45 cal/cm², size: 8 4650408





arc flash gloves "BSD-Classic" HRC 4, 47.0 cal/cm²

- arc flash tested according to ASTM F1959, ATPV: 47,0 cal/cm²- also certificated according to ASTM F1506, CSA Z462, OSHA 1910.269- for the highest arc flash protection- double layer fabric, 350 g/m² (10 oz/yd2) per layer: cotton, carbon- color: navyblue


BSD-safety gloves HRC 4, 47.0 cal/cm², size: 8 4650208





arc flash jacket "BSD-Classic", HRC 4, 47.0 cal/cm²

- arc flash tested according to ASTM F1959, ATPV: 47,0 cal/cm²- also certificated according to ASTM F1506, CSA Z462, OSHA 1910.269- for the highest arc flash protection- to wear over the normal PPE or clothing- embroidered signs with class specification on left chest- double layer fabric, 350 g/m² (10 oz/yd2) per layer: cotton, carbon- color: navyblue


BSD jacket HRC 4, 47.0 cal/cm², size: S 4655030

BSD jacket HRC 4, 47.0 cal/cm², size: M 4655031

BSD jacket HRC 4, 47.0 cal/cm², size: L 4655032

BSD jacket HRC 4, 47.0 cal/cm², size: XL 4655033

BSD jacket HRC 4, 47.0 cal/cm², size: XXL 4655034

BSD jacket HRC 4, 47.0 cal/cm², size: XXXL 4655035


arc flash bib overall "BSD-Classic", HRC 4, 47.0 cal/cm²

- arc flash tested according to ASTM F1959, ATPV: 47,0 cal/cm²- also certificated according to ASTM F1506, CSA Z462, OSHA 1910.269- for the highest arc flash protection- to wear over the normal PPE or clothing- embroidered signs with class specification on the left leg- double layer fabric, 350 g/m² (10 oz/yd2) per layer: cotton, carbon- color: navyblue


BSD bib overall HRC 4, 47.0 cal/cm², size: S 4655040

BSD bib overall HRC 4, 47.0 cal/cm², size: M 4655041

BSD bib overall HRC 4, 47.0 cal/cm², size: L 4655042

BSD bib overall HRC 4, 47.0 cal/cm², size: XL 4655043

BSD bib overall HRC 4, 47.0 cal/cm², size: XXL 4655044

BSD bib overall HRC 4, 47.0 cal/cm², size: XXXL 4655045

arc flash kit "BSD-Classic", HRC 4, 47.0 cal/cm²

Kit-HRC 4 consists of:

- 1 pce arc flash hood HRC 4- 1 pce arc flash jacket HRC 4- 1 pce arc flash dungarees HRC 4- 1 pair arc flash gloves HRC 4- 1 pce storage bag

- arc protection hood with integrated hard hat and bracket arc flash testedaccording to ASTM F2178, ATPV: 47.0 cal/cm²

- arc flash tested according to ASTM F1959, ATPV: 47,0 cal/cm²- arc flash testet according to ASTM F1506, CSA Z462, OSHA 1910.269- for the highest arc flash protection- to wear over the normal PPE or clothing- double layer fabric, 350 g/m² (10 oz/yd2) per layer: cotton, carbon- bag to storage or transport the Kit- color: navyblue


KIT HRC 4, 47.0 cal/cm², size: S 4100510

KIT HRC 4, 47.0 cal/cm², size: M 4100511

KIT HRC 4, 47.0 cal/cm², size: L 4100512

KIT HRC 4, 47.0 cal/cm², size: XL 4100513

KIT HRC 4, 47.0 cal/cm², size: XXL 4100514

KIT HRC 4, 47.0 cal/cm², size: XXXL 4100515


arc flash gloves "BSD-Power", HRC 4, 41.0 cal/cm², 12 oz/yd²

- arc flash tested according IEC 61482-1-1: ASTM F1959, ATPV: 41.0 cam/cm²- extreme breathable according to EN 31092 / ISO 11092: RET= 7,10 m² Pa/W- ultra light grammage 410 g/m² (12 oz.yd2)- fabric: aramid (Nomex®), modacrylic, cotton, antistatic component- for the highest arc flash protection- color: greyblue


BSD arc flash gloves HRC 4 Power, 41.0 cal/cm², size: 8 4650008





arc flash jacket "BSD-Power", HRC 4, 41.0 cal/cm², 12 oz/yd²

- arc flash tested according to IEC 61482-1-1: ASTM F1959, ATPV: 41,0 cal/cm²- arc flash tested according to IEC 61482-1-2, class 2- heat and flame protection according to EN ISO 11612:2015 A1/B1/C1/F1- welding protection according to EN ISO 11611:2015 class 2-A1- extreme breathable according to EN 31092 / ISO 11092: RET= 7,10 m² Pa/W- for the highest arc flash protection- to wear over the normal PPE or clothing- industry washing suitable according to EN ISO 15797- embroidered signs with class specification on the left chest- ultra light grammage: 410g/m² (12 oz.yd2)- outer layer 240 g/m², 75% aramid (Nomex®), 13% modacrylic, 10.5% cotton, 1.5%antistatic component- inner layer 170 g/m², 100% aramid (Nomex®)- color: greyblue


BSD jacket HRC 4 Power, class 2, 41.0 cal/cm², 12.0 oz/yd2, size: S 4655010

BSD jacket HRC 4 Power, class 2, 41.0 cal/cm², 12.0 oz/yd2, size: M 4655011

BSD jacket HRC 4 Power, class 2, 41.0 cal/cm², 12.0 oz/yd2, size: L 4655012

BSD jacket HRC 4 Power, class 2, 41.0 cal/cm², 12.0 oz/yd2, size: XL 4655013

BSD jacket HRC 4 Power, class 2, 41.0 cal/cm², 12.0 oz/yd2, size: XXL 4655014

BSD jacket HRC 4 Power, class 2, 41.0 cal/cm², 12.0 oz/yd2, size: XXXL 4655015


arc flash bib overall "BSD-Power", HRC 4, 41.0 cal/cm², 12 oz/yd²

- arc flash tested according to IEC 61482-1-1: ASTM F1959, ATPV: 41,0 cal/cm²- arc flash tested according to IEC 61482-1-2, class 2- heat and flame protection according to EN ISO 11612:2015 A1/B1/C1/F1- welding protection according to EN ISO 11611:2015 class 2-A1- extreme breathable according to EN 31092 / ISO 11092: RET= 7,10 m² Pa/W- for the highest arc flash protection- to wear over the normal PPE or clothing- 2 side pockets- stretch strap with fast-lock clasp, side-access with 2 stretch insert- industry washing suitable according to EN ISO 15797- embroidered signs with class specification on the leg- ultra light grammage: 410g/m² (12 oz.yd2)- outer layer 240 g/m², 75% aramid (Nomex®), 13% modacrylic, 10.5% cotton, 1.5%antistatic component- inner layer 170 g/m², 100% aramid (Nomex®)- color: greyblue


BSD bib overall HRC 4 Power, class 2, 41.0 cal/cm², 12.0 oz/yd2, size: S 4655020

BSD bib overall HRC 4 Power, class 2, 41.0 cal/cm², 12.0 oz/yd2, size: M 4655021

BSD bib overall HRC 4 Power, class 2, 41.0 cal/cm², 12.0 oz/yd2, size: L 4655022

BSD bib overall HRC 4 Power, class 2, 41.0 cal/cm², 12.0 oz/yd2, size: XL 4655023

BSD bib overall HRC 4 Power, class 2, 41.0 cal/cm², 12.0 oz/yd2, size: XXL 4655024

BSD bib overall HRC 4 Power, class 2, 41.0 cal/cm², 12.0 oz/yd2, size: 3XL 4655025

arc flash kit "BSD-Power", HRC 4, 41.0 cal/cm², 12 oz/yd²

Kit-Power consists of:

- 1 pce arc flash hood HRC 4 Power- 1 pce arc flash jacket HRC 4 Power- 1 pce arc flash dungarees HRC 4 Power- 1 pair arc flash gloves HRC 4 Power- 1 pce storage bag

- arc flash hood with integrated hard hat and bracket tested according to ASTM F2178,ATPV: 40.0 cal/cm²- EN 166, "personal eye-protection requirements"- with CE-labeling- jacket and dungarees arc flash tested according to IEC 61482-1-1: ASTM F1959, ATPV:41,0 cal/cm²- jacket and dungarees arc flash tested according to IEC 61482-1-2, class 2- heat and flame protection according to EN ISO 11612:2015 A1/B1/C1/F1- welding protection according to EN ISO 11611:2015 class 2-A1- extreme breathable according to EN 31092 / ISO 11092: RET= 7,10 m² Pa/W- for the highest arc flash protection- clothing industry washing suitable according to EN ISO 15797- ultra light grammage: 410g/m² (12 oz.yd2)- outer layer 240 g/m², 75% aramid (Nomex®), 13% modacrylic, 10.5% cotton, 1.5%antistatic component- inner layer 170 g/m², 100% aramid (Nomex®)- bag to transport and storage the KIT- color: greyblue


KIT HRC 4 Power, 40.0 cal/cm², 12.0 oz/yd2, size: S 4100410

KIT HRC 4 Power, 40.0 cal/cm², 12.0 oz/yd2, size: M 4100411

KIT HRC 4 Power, 40.0 cal/cm², 12.0 oz/yd2, size: L 4100412

KIT HRC 4 Power, 40.0 cal/cm², 12.0 oz/yd2, size: XL 4100413

KIT HRC 4 Power, 40.0 cal/cm², 12.0 oz/yd2, size: XXL 4100414

KIT HRC 4 Power, 40.0 cal/cm², 12.0 oz/yd2, size: XXXL 4100415


Cooling - Vest

The vest works similar to the human body, which stabilizesits temperature by the evaporative of water on the skin.The innovative functionale textile fabric absorbs water.The body and clothing stay dry.The cooling effect is sustained for up to 20 hours, dependingon temperature. The cooling takes place on the level of thestandard temperature distribution. (approx 28-32 °C)

- improving the concentration and capability- raise of productivity- reduces heat-stress and exhaustion- "charging" lasts 1 min, only water is required- the vest can be worn under and above normal clothing,

PPE under the PPE


Cooling Vest, size S, chest measurement: 88 - 95 cm 4630050

Cooling Vest, size M, chest measurement: 96 - 103 cm 4630060

Cooling Vest, size L, chest measurement: 104 - 111 cm 4630070

Cooling Vest, size XL, chest measurement: 112 - 119 cm 4630080

Cooling Vest, size XXL, chest measurement: 120 - 127 cm 4630090

Cooling - Clothes

The cooling clothes works similar to the human body, which stabilizesits temperature by the evaporative of sweat on the skin.The innovative functionale textile fabric absorbs water.The body and clothing stay dry.The cooling effect is sustained for up to 20 hours, dependingon temperature. The cooling takes place on the level of thestandard temperature distribution. (approx 28-32 °C)

- improving the concentration and capability- raise of productivity- reduces heat-stress and exhaustion- "charging" lasts 1 min, only water is required- the clothing can be worn under and above normal clothing,

PPE under the PPE


cooling helmet inlay, standard size, color blue 4630095

cooling bandana, standard size, blue black 4630096

armcooler, standard size, color black 4630097

cooling halterneck, standard size, color black 4630098


storage and transport bag for KIT and PPE

- bag to store and transport PPE- enough space for face protection, helmet, arc flash clothing

and protective gloves- solid construction- size: 58 cm x 30 cm x 35 cm


storage and transport bag for KIT and PPE 4701001


Date post:	01-May-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

PSAgS gegen die thermischen Auswirkungen von Störlichtbögen Flas… · different parameters for...

Documents