PSP
PSP-03-EN
®
Electro-permanentmagnetic chuck
Limited offer16 PROMOTIONAL
SIZESThese sixteen promotional kits come as a complete solution for the handling and clamping of various sized and shaped parts for nearly all machining processes at a great price. Magnetically clamped parts allow for safer and faster machining in an easy and energy saving fashion.
Choose from our
2
3
4
5
6
7
8
9
10
1 Brisc creates a constant unchanging force
5 sided access to the part in a single set-up
The ability to drill through without damage to the magnet surface using optional pole extensions
No moving parts to wear out in the magnet itself
The vibration reduction associated with clamping the entire part surface instead of just a few small areas as with mechanical clamping methods
The automatic shimming optional set-up will give improved production immediately
3 seconds to clamp even the largest parts accurately and easily
With the electro-permanent design the electrical power is only required for just a few seconds to activate and deactivate the magnet. This means loss of power does not change the holding force
The electro-permanent design eliminates residual magnetism and allows up to 130 metric tons of force / SQ meter
With the square pole design the magnetic field is just 25 mm from the surface keeping the chips from sticking to the part
• Square pole electro-permanent magnetic chuck with standard density
Use:Clamping for heavy machining of medium size workpiece
Features:
Square pole size 50 x 50 mmMagnetic force higher than 350 kg per poleElectro-permanent technology with no deformation owingto the rise of the temperature
10 Reasons “WHY BRISC magnetic work holding?”
Pole-extention sets
+ +Control UnitPSP Magnetic Chuck
• PSP-Series productcombination
With mild steel part 25 mm thick 305 mm X 305 mm and 102 mm face mill 6 mm deep max feedrate is 381 mm per minute with 2X safety factor and no stops. With stops 1.5m per minute can be reached.
( Optional )
Minimum mechanical deformation with solid one-piece housingDistortion free clamping with auto-shim pole extensions, no residualmagnetism, controlled flux prevents magnetization of the toolWorkpiece larger than the table size are machinable
( Optional )
- 1 -
5959
PSP SERIESELECTRO-PERMANENT MAGNETIC CHUCK
PSP - 3634
PSP - 3649
PSP - 3664
59
MILLING
59
PSP - 3679
MILLING
MILLING
MILLING
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
340 mm360 mm59 mm2053 kgsCUACUA70 kN
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
490 mm360 mm59 mm3078 kgsCUACUA105 kN
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
640 mm360 mm59 mm40101 kgsCUACUA140 kN
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
790 mm360 mm59 mm50125 kgsCUACUA175 kN
- 2 -
59
PSP SERIESELECTRO-PERMANENT MAGNETIC CHUCK
PSP - 4264
PSP - 4279
PSP - 4294
59
MILLING
59
PSP - 42109
MILLING
MILLING
MILLING
59
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
640 mm420 mm59 mm48118 kgsCUACUA168 kN
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
790 mm420 mm59 mm60146 kgsCUACUD210 kN
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
940 mm420 mm59 mm72174 kgsCUACUD252 kN
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
1090 mm420 mm59 mm84201 kgsCUACUD294 kN
- 3 -
59
PSP - 4864
PSP - 4879
PSP - 4894
59
MILLING
59
PSP - 48109
MILLING
MILLING
MILLING
59PSP SERIESELECTRO-PERMANENT MAGNETIC CHUCK
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
640 mm480 mm59 mm56135 kgsCUACUA196 kN
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
790 mm480 mm59 mm70167 kgsCUACUD245 kN
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
940 mm480 mm59 mm84199 kgsCUACUD294 kN
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
1090 mm480 mm59 mm98230 kgsCUDCUD343 kN
- 4 -
59
PSP - 6064
PSP - 6079
PSP - 6094
59
MILLING
59
PSP - 60109
MILLING
MILLING
MILLING
59
PSP SERIESELECTRO-PERMANENT MAGNETIC CHUCK
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
640 mm600 mm59 mm72169 kgsCUACUD252 kN
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
790 mm600 mm59 mm90209 kgsCUDCUD315 kN
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Controller(220V)Clamping force
940 mm600 mm59 mm108248 kgsCUDCUD378 kN
ParameterParameterLengthWidthHeightPole numberNet weightController(400/480V)Clamping force
1090 mm600 mm59 mm126288 kgsCUD441 kN
- 5 -
Juego de Polos extensores fijos
EW - 5020
EV - 5020EX - 5020
20mm
ES - 5052
ET - 5052
52mm
Model Size EV-5020 EW-5020 EX-5020
AUTO-SHIM POLE EXTENSION SET
Because of the built in threaded pin, the ES fix pole extension and ET mobile pole extension can be fixed onto the chuck quickly with simple rotations, no need any tools, savinga lot of time for deploying the pole extensions.
The ET mobile pole extension can increase up to 20% the magnetic clamping force comparing the conventional mobile pole extension and the vertical adjustment is up to 6 mm.
3634
3649
3664
3679
4264
4279
4294
42109
4864
4879
4894
48109
6064
6079
6094
60109
10 pcs
15 pcs
20 pcs
25 pcs
24 pcs
30 pcs
36 pcs
42 pcs
28 pcs
35 pcs
42 pcs
49 pcs
36 pcs
45 pcs
54 pcs
63 pcs
FPS
FPS
FPS
FPS
FPS
FPS
FPS
FPS
FPS
FPS
FPS
FPS
FPS
FPS
FPS
FPS
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
Model Size ET-5052 ES-5052
3634
3649
3664
3679
4264
4279
4294
42109
4864
4879
4894
48109
6064
6079
6094
60109
17 pcs
27 pcs
37 pcs
47 pcs
45 pcs
57 pcs
69 pcs
81 pcs
53 pcs
67 pcs
81 pcs
95 pcs
69 pcs
87 pcs
105 pcs
123 pcs
MPE
MPE
MPE
MPE
MPE
MPE
MPE
MPE
MPE
MPE
MPE
MPE
MPE
MPE
MPE
MPE
3 pc
3 pc
3 pc
3 pc
3 pc
3 pc
3 pc
3 pc
3 pc
3 pc
3 pc
3 pc
3 pc
3 pc
3 pc
3 pc
FIX POLE EXTENSION SET
PSP SERIESPOLE EXTENSION SETS
- 6 -
CUD-A (two coils)
ParameterParameterLengthWidthHeightNet weight
325 mm170 mm90 mm3.4 kg
CUA-H (one coil)
PSP SERIESCUA-A (one coil)
PSP SERIESCONTROL UNIT
ParameterParameterLengthWidthHeightNet weight
325 mm170 mm90 mm3.4 kg
Max. pole No. each channel can drive
220 V400/480 V
5684
Voltage Max. pole No. Pole Size50 x 50 mm50 x 50 mm
ParameterParameterLengthWidthHeightNet weight
250 mm150 mm100 mm1.6 kg
CUD-H (two coils)
ParameterParameterLengthWidthHeightNet weight
250 mm150 mm100 mm1.6 kg
Max. pole No. each channel can drive
220 V400/480 V
5684
Voltage Max. pole No. Pole Size50 x 50 mm50 x 50 mm
Max. pole No. each channel can drive
220 V400/480 V
5684
Voltage Max. pole No. Pole Size50 x 50 mm50 x 50 mm
Max. pole No. each channel can drive
220 V400/480 V
5684
Voltage Max. pole No. Pole Size50 x 50 mm50 x 50 mm
- 7 -
RMC-3-PCB JMT-1
CBL-325
MPH 1/2QCS-4MS
JMT-3
JMT-2 CCX 1/2 -325
RMC-3-PCB JMT-1
CBL-325
MPH 1/2QCS-5MS
JMT-3
JMT-2 CCX 1/2 -425
QCS-5MS MPH 1/2
CBL-325
JMT-3
JMT-1
CCX 1/2-425 JMT-2
QCS-4MS MPH 1/2
CBL-325
JMT-3
JMT-1
CCX 1/2-325JMT-2
JMT-1control cablethread connector
JMT-3power cableplastic connector
JMT-2adaptor for metal protection hose
CUACCX 1/2 -3255 meters cable with metal protection hose
MPH 1/25 meters metal protection hose
MPH 1/2-MT1 meter metal protection hose
CUDCCX 1/2 -4255 meters cable with metal protection hose
CUACUA-PCBelectro board of CUA
RMC-3-PCBelectro board of RMC-3
CUDCUD-PCBelectro board of CUD
CUAQCS-4MSquick control cable connector cable end
CUDQCS-5MSquick control cable connector cable end
CUAQCS-4FPquick connector chuck end
CB-1Connection box Ф26 mm
CUDQCS-5FPquick connector chuck end
Spare parts list
PSP SERIESCONTROL UNIT
CBL-3255 meters power/control cable 3 x 2.5
CBL-325-MT1 meter power/control cable 3 x 2.5
CBL-4255 meters control cable 4x2.5
CBL-425-MT1 meter control cable 4x2.5
CUD
CUD
- 8 -
DXF-11 meter extension cable 3x2.5
DXG-11 meter extension cable 4x2.5
CUA
CUD
Extension cable
Large workpiece
CUFCUSCUE
383 mm383 mm383 mm
Model Length Width Height Net weight Description 4 channels6 channels8 channels
289 mm289 mm289 mm
129 mm129 mm129 mm
8 kg8 kg8 kg
Parameter
CUF / CUS / CUE (multi-channels)
Use:Electro-permanent magnetics modulesFeatures:
Good for both 50 Hz and 60 HzSelftesting and magnetizing detectionPLC connection built inWith channel selection functionCan be used jointly
PSP SERIESCONTROL UNIT
Multi control units can be used jointly if necessary.
Use:For wire remote controlFeatures:
Small and compactWith magnetic plate on the rear for ease of attachment
RMC-1RMC-2RMC-3
136 mm136 mm136 mm
Model Length Width Height Strength adjustableYesYesNo
66 mm68 mm66 mm
41 mm55 mm41 mm
Parameter
RMC-1 RMC-2 RMC-3
RMC-1 / RMC-2 / RMC-3 (Wire remote control box)
Max. pole No. each channel can drive
220 V400/480 V
5684
Voltage Max. pole No. Pole Size50 x 50 mm50 x 50 mm
- 9 -
CONTROL UNIT
JUNCTION BOX
PSP SERIESJUNCTION BOX
JB-1 (Four channels junction box) JB-2 (Eight channels junction box)
200 (7.87) 160 (6.30) 100 (3.94) 2.3 kg/5.1 lbs
Sizes
unit: mm(in)
Use:Fast connections between chucks and control unitFeatures:
Die cast aluminium boxIP65 water resistant7 pins quick connectors makes connection and disconnection much easier
Length Width Height Weight
Use:Fast connections between chucks and control unitFeatures:
Die cast aluminium boxIP65 water resistant7 pins quick connectors makes connection and disconnection much easier HARTING connector available on request
280 (11.02) 230 (9.06) 110 (4.33) 4.5 kg/9.9 lbs
Sizes
unit: mm(in)
Length Width Height Weight
JB-8 (Four channels junction box) JB-9 (Eight channels junction box)
270 (10.62) 150 (5.90) 90 (3.54) 2.5 kg/5.5 lbs
Sizes
unit: mm(in)
Use:Fast connections between chucks and control unitFeatures:
Die cast aluminium box
7 pins quick connectors makes connection and disconnection much easier
IP65 water resistant
Length Width Height Weight
330 (11.81) 230 (9.05) 180 (7.08) 6.2 kg/13.7 lbs
Sizes
unit: mm(in)
Use:Fast connections between chucks and control unitFeatures:
Die cast aluminium box
7 pins quick connectors makes connection and disconnection much easierHARTING connector available on request
IP65 water resistant
Length Width Height Weight
- 10 -
®