2
PRODUCT DESCRIPTION
DIMENSIONS
PT1000 and NTC Temperature sensors BITZER Electronics offers a wide range of tempera-ture sensors, used for all applications within the HVAC industry. The sensor can be tailored to fit all necessary environments and application needs, with different tem-perature range, cable lengths and housing.
In addition BITZER Electronics offers a wide range of other sensors for the HVAC industry:
Differential pressure transducers
PTC sensors
CO2 sensors
O2 sensors
DATASHEET // V. 8.0
2510
20
1/8" NPT
EX12
ø10
PT1000
1050
50
2510
20
1/8" NPT
EX12
ø10
PT1000
1050
50
2515
10
1/8" NPT
EX14
Ø4 mm
PT1000
Ø6,5 mm
M12x1
41.5
81.5
2510
20
1/8" NPT
EX12
ø10
PT1000
1050
50
2510
20
1/8" NPT
EX12
ø10
PT1000
1050
50
2515
10
1/8" NPT
EX14
Ø4 mm
PT1000
Ø6,5 mm
M12x1
41.5
81.5
30 ± 0,5
950 ± 15
85 ± 10
6 ±
0,2
1 2 3 4
2015 ± 30
50 ± 5
6 ± 2
10 ± 520 Max
1
32
Max
Φ6
3
10 ± 5
30 ± 0,3 2000 ± 306 ±
0,2
2 3
1
3
10 ± 5
30 ± 0,3 5000 ± 306 ±
0,2
2 3
1
PT1000 - M12 screw
connection 433001
PT1000 - 1,050 mm
connection cable 433040
NTC sensors 433016
NTC sensors 433036
NTC sensors 433015
NTC sensors 433028
3
TECHNICAL DATA
DATASHEET // V. 8.0
Technical specifications PT1000PT1000 sensor Pt1000 Cl. B / IEC751
Maximum operating temperature 150°C
IP rating IP65
Insulation resistance 100 MOhm @500VCC
Sensor housing Stainless Steel AISI 303
Mounting thread 1/8” NPT
Connection 1,050 mm connection cable / M12 screw connection
Technical specifications NTC sensorsDescription NTC, resin probe NTC, steel probe NTC, steel probe NTC, steel probe
Item no: 433016 433036 433015 433028
Cable length 2 m 2 m 5 m 0.95 m
Temperature range -30°C ~ +80°C -30°C ~ +105°C -30°C ~ +105°C -30°C ~ +240°C, head of thermistor
Sensor casing Epoxy resin Stainless steel Stainless steel Stainless steel
Lead wireBlack, 2 * 0.2 mm2, max. 105°C
Black, 2 * 0.2 mm2, max. 105°C Black, 2 * 0.2 mm2,
max. 105°C
Teflon, 2 * 0.2 mm2 * 85 mm, max. 240°C Black, 2 * 0.2 mm2, max. 105°C
PurposeGeneral purpose, not in evaporators
General use General use Recommended for use in solar panels or discharge lines
NTC resistance R25 = 10 kOhm ± 1%
B value B25/50 = 3933 kOhm ± 2%
Insulation strength in water 500 VAC, > 100 MOhm
Dielectric strength in water 1500 VAC, 1. min no flash-over
BITZER Electronics A/S
Kærvej 77 // 6400 Sønderborg // Denmark
Tel +45 73 42 37 37 // Fax +45 73 42 37 30
[email protected] // www.bitzerelectronics.com
Subject to change // 06.2020