• Industrial telehandler with 40,000 lb. capacity at 24-inch load center. • Compact lowered height, can lift 20 tons 20 feet. • 88” tall, 6’ wide, 20’ reach, 20’ lift, 27’ to jib eye and 6 tons of removable counterweight. • All boom movements, including TRUE VERTICAL LIFT and TRUE HORIZONTAL REACH are controlled by a single joystick. • Fork tilt is auto-leveling with a manual override. • Fine-feathering hydraulics ensure smooth and precise load positioning. • Smooth hydrostatic drive is controlled by a comfortable foot treadle. • The deep reduction planetary wheel hubs generate 20,000 pounds of tractive effort and can propel a 20 ton load up a 24% grade. • Radio remote control allows many jobs to be completed with only one operator. LANDOLL CORPORATION www.landoll.com/mhp | 800-428-5655 ® PT40 PRECISION TELEHANDLER WIRELESS REMOTE CONTROL All PT40 drive and lift functions can be controlled via wireless transmitter, allowing a single operator to observe the entire work environment without being confined to the operator’s station.
WIRELESS REMOTE CONTROLAll PT40 drive and lift functions can be controlled via wireless transmitter, allowing a single operator to observe the entire work environment without being confined to the operator’s station.
PRECISION TELEHANDLER - PT40TECHNICAL & DIMENSION DATA
The specifications contained in this spec sheet are subject to change at any time without notice. Actual dimensions and performance data given herein may vary due to manufacturing tolerances.
FO RW ARD RE AC H
20 TON
88"
243"
325"
121"
36"
96"
24" 96" 22"
141"24"
10"
8"
Lift
Hei
ght,
feet
PT40 with Jib
0
16'18'20'
Load Center, feet
12' 10'14' 6' 4'8'
5'
10'
02'
39,0
00
27'
15'
20'
25'
Capacity, pounds
5,10
0
5,70
0
6,30
0
7,10
0
8,10
0
9,40
0
12,0
00
16,5
00
24,0
00
Lift
Hei
ght,
feet
PT40 with ForksLoad Center, feet
14'
0
8'12' 10'
10'
5'
02'6' 4'
Capacity, pounds
15'
20'
7,60
0
8,70
0
10,2
00
12,8
00
17,3
00
24,9
00
40,0
00
PT40Tires 28x10x22, front duals, rear singlesGradeability 24% with 40,000 lb. loadTractive Effort 20,000 lbs.Weights 40,700 lbs. complete - Jib and Rack 2,800 lbs.
- Removable Counterweight 12,000 lbs.
- Both Forks 1,600 lbs.
MODEL PT40Engine GM 3.0 L 91 hp at 3000 rpmTransmission Hydrostatic, 0-6mph infinitely variableHyd. System Load sensing, pressure compensatedHyd. Filtration 3 micron synthetic elementElectrical Sealed IP66 Minimum
PT40-0216
MHEDAYOUR INDUSTRY CONNECTION
MATERIAL HANDLING
OF AMERICA ®INDUSTRY
Member Company
www.landoll.com/mhp1900 North Street | Marysville, KS 66508 | (800) 428-5655
