PUBLIC AUCTION · 2020-05-18 · SALES TAX-All sales are subject to state and local taxes, unless a...

SALE CATALOGOnline Only Auction

MAGNETICS, DIVISION OF SPANG & COMPANY

110 Delta Dr., Pittsburgh, PA 15238

BIDDING STARTS: WEDNESDAY, MAY 27, 2020 - 10:00 AM

18% BUYER’S PREMIUM IS IN EFFECT FOR THIS SALE!NO MERCHANDISE MAY BE REMOVED WHILE THE SALE IS IN PROGRESS!

ALTHOUGH INFORMATION HAS BEEN OBTAINED FROM SOURCES DEEMED RELIABLE, THE AUCTIONEER MAKES NO WARRANTY FOR GUARANTEE EXPRESSED OR IMPLIED, AS TO THE ACCURACY OF THE INFORMATION HEREIN CONTAINED.

IT IS FOR THIS REASON THAT BUYERS SHOULD AVAIL THEMSELVES FOR THE OPPORTUNITY TO MAKE INSPECTION PRIOR TO THE SALE.

Sale Under the Management of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | [email protected] Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

AUCTIONPUBLIC

1,----~ ::;;;;-____ _JI

SYNOPSIS OF THE TERMS OF SALE

MAGNETICS, DIVISION OF SPANG & COMPANY 110 Delta Dr., Pittsburgh, PA 15238

BIDDING STARTS: WEDNESDAY, MAY 27, 2020-10:00 AM REGISTRATION: All Bidders must register and complete the bidder registration form, removal agreement and sales tax exemptlonfbrmssentbytheauctioneerafterregisteringfortheauct1ononwww.bidspotter.com.

"AS IS, WHERE IS" : Everything is being sold for cash on an" as is", "where is" basis without warranties expressed or implied on part of the Owner and Auctioneer. There are NO REFUNDS, NO EXCHANGES, NO GUARANTEES or NO WARRANTIES on any item.

DEPOSITS: The Auctioneer may request a deposit at time of registration.

PAYMENTS: ALL INVOICES MUST BE PAID IN FULL WITHIN 24 HOURS AT THE CLOSE OF THE AUCTION. Any merchandisenotpaidforbyth isspecifiedtimewi 11 be considered abandoned and maybe resold bytheauctioneer, any loss incurred in the resale to be borne bythe original buyer. All payments must be made by check or certified funds by express mail, wire

Transfer or ACH. All paymentsmustbemadetoCIAoffice, NO ONSITE PAYMENTS OR CREDIT CARDS WILL BE ACCEPTED.

REMOVAL: All Bidders must execute the COVID-19 Health Screening Questionnaire & Self Declaration Sheet. All Bidders must comply with Social Distancing Policies & any other policies as requested by Magnetics (Seller) and the state of Pennsylvania. ALL individuals entering the premises for preview and/or removal MUST wear their own supplied mask at all times.

"TIME IS OF THE ESSENCE" ALL ITEMS MUST BE OFF THE PREMISES BY FRIDAY, JUNE 5TH at 4:00 PM. At the Owners Discretion, any items remaining after this time will be removed from the premises and stored at the expense of the buyer, considered abandoned and scrapped.

CHECKOUT:

Thursday, May 28th & Friday, May 29th From 8:00 AM - 4:00 PM Monday, June 2nd - Friday, June 5th From 8:00 AM - 4 :00 PM

IMPORTANT AUCTION NOTICES: 18% BUYERS PREMIUM IS IN EFFECT FOR THIS SALE!

ALL BUYERS WILL BE REQUIRED TO EXECUTE AN "AUCTION PURCHASE REMOVAL AGREEMENT" NO MERCHANDISE MAY BE REMOVED WHILE THE SALE IS IN PROGRESS!!

ALLSALESSUBJECTTOSTATEANDLOCALSALESTAXWHEREAPPLICABLE ALL BIDDERS MUSTCOMPLYWITH OUR CUSTOMARY"TERMS OF SALE" ATTACHED HERE,

POSTEDATTHESALESITE& [email protected]. Auctioneer CANNOT Assist with Export Documents!

All Titles will be mailed 7 - 14 Business days after payment!

WIRING INSTRUCTIONS Thebalanceofyourinvoicemaybewireddirectlytoourbank:

PNC Bank,201 East FifthStreet,Cincinnati,Ohio 45201 Call for Complete Wire Transfer Instructions

PLEASE SPECIFY YOUR BIDDER NUMBER WHEN MAKING YOUR WIRE TRANSFER NOTE: A BANK WIRE TRANSFER FEE WILL APPLY WHICH IS NOT INCLUDED IN BALANCE DUE OF INVOICE

CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers I appraisers I since 1961 I cia-auction.com I [email protected] 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

ONLINE TERMS OF SALE NOTICE: All Bidders and other persons participating in this sale agree that they have read and have full knowledge of these terms and agree to be bound thereby.

1. IDENTIFICATION -All purchases are required to give full name and addresses at time of registration. Auctioneer, at its sole discretion, may deny registration to any person or entity.

2. DEPOSIT&BIDDERAPPROVAL-Eachbidderwillberequiredtopostadepositincash,certifiedcheckorbankletter of guarantee if stated or maybe required tocontinuebiddi ng if monetary threshold has been reached. Failure to make a required deposit may result in suspension of bidding privileges.

3. TIME OF PAYMENT-All invoices must be paid in full within 48 hours of the sales conclusion. Any other arrangements must be made with auctioneer prior to bidding. If not, the merchandise will be deemed abandoned and Buyerwill loseanyright, titleorinterestBuyermay have acquired and the merchandise shall revert and repossess toAuctioneerwithout further notice to Buyer and the transaction shall be null and void as to Buyer.

4. REMOVAL-All purchases must be removed not later than the date specified in the Auction Catalogue and/ or announced on thewebsite. In any case, No later than 14daysafterthecloseof the sale. All goods are sold "Where Is". Removal shall be at the expense, risk and liability of the Buyer. Purchases will be delivered only on presentation of paid bill. Auctioneers hall not beresponsibleforgoods not removed within the time allowed, but shall have the option to remove and store at the expense and risk of the Buyer any article purchased, but not paid for and removed within the time aforesaid.

s. MANNER OF PAYMENT-All payments must be made by cash, cashier's check or company check with a bank letter of authorization guaranteeing funds to Cincinnati Industrial Auctioneers, Inc. All checks for deposits and balances due shall be payable to the order of "Cincinnati Industrial Auctioneers, Inc. "All invoices must be paid to the Auctioneerattheofficeaddress 2020 Dunlap St. Cincinnati, Ohio45214unlessotherwiseannounced. The full purchase price on all lots sold to the same Buyer must be paid within thetimefixed and before removal of any goods.

6. CONDITION OF ARTICLES SOLD- The auctioneer shall not be responsible for the correct description, genuineness, authenticity of, or defect in any lot, and makes no warranty in connection therewith. No sale will be set aside nor allowance made on account of any incorrectness, error in commentary, cataloging, or any imperfection not noted. No deduction allowed on damaged articles, all goods being exposed for public exhibition, are purchased and accepted by Buyer" AS IS", " WHERE IS" and "WITH ALL FAULTS" . Auctioneer makes no warranties or guarantees whatsoeverwhetherwritten, oral or implied as to quality, quantity, condition, usability, salability, weight, measurement, year, model, mechanical condition, performance or other specifications and without recourse.

7. CLAIMS-No Claims will be allowed after removal of goods from premises. 8. RESPONSIBILITY FOR NON-DELIVERY -Auctioneer shall not, in any event, be l iablefornon-del ivery orf or any other

matter or thing, to any Buyer of any lot, other than for the return to the Buyer of the deposit or sum paid on said lot, should the Buyer be entitled thereto.

9. COMPLIANCE WITH TERMS OF SALE - In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within thetimeallowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting purchaser.

10. RISK TO PERSON AND PROPERTY - Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer from liability therefor. Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held .

11. ADDITION TO OR WITHDRAWAL FROM SALE - The auctioneer reserves the right to alter the order of the sale, withdrawal from the sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide i ntotwo or more selling lots. Whenever the best interest of theSellerwill be served, the Auctioneer reserves the right to sell property listed, in bulk.

12. SALEBYESTIMATEDWEIGHT, COUNTORMEASURE-Whereitemsaresoldbyestimatedweight,countor measure, the Buyer will be billed for and required to pay for the estimated weight, count or measure. If, upon delivery, any


shortage exists, the Buyer will receive a refund at the rate of the purchase. If there be an excess, the Buyer will be required to take and pay for such excess, at the rate of the purchase.

13. DISPUTE BETWEEN BIDDERS/BID INCREMENTS-If any dispute arises between two or more bidders, the auctioneer maydecidethesameor put the lotupforsaleagain at once, or resell to the highest bidder. The Auctioneer may rejectanominalorfractionalbidadvanceif, in his estimation, itprovesinjurioustothesale. The auctioneer's decision shall be final and absolute.

14. RESERVE-Theauctioneerreserves the right torejectany and all bids. On lotsuponwhichthereisareserve, the auctioneer shall have the right to bid on behalf of the seller.

15. RECORDS-The record of sale kept by theauctioneer and bookkeeperwill betaken as final in the event of any dispute.

16. AGENCY- The auctioneer is acting as agent only and is not responsible for the acts of its principals. 17. SALES TAX-All sales are subject to state and local taxes, unless a proper exemption certificate including tax

exempt number is presented at the time of payment. 18. BUVER'SPREMIUM-TheAuctioneerinitssolediscretionmayimposeaBuyer'sPremiumonanygoodssold. The

Buyer's Premium is a percentage that is added to the final purchase price of any item. Applicable Buyer's Premium will be posted on the website.

19. SHIPPING-All coolants, oil and fluids must be drained from all machinery and equipment prior to removal. All of the above must be shipped in compliance with state and federal regulations.

20. INSURANCE-All buyers, or the buyer's riggers must provide the auctioneer, owner and landlord a certificate of insurance in amounts acceptable to the above parties prior to removal of any machinery and equipment.

21. ADDITIONAL TERMSAND CONDITIONS-The auctioneer may modify orsupplement these terms and conditionsof sale by language in the Auctioneers website, the catalog or via email to active bidders.

22. FALSE BIDS: If the high bidder fails to complete the transaction Auctioneer reserves the right to dispose of the assets in the best interest of the seller. Any High Bidder that fails to complete a transaction will be held responsible for all damages resulting from that action.

23. MALFUCTION: ANY Malfunction, Shutdown, or Temporary loss of Service involving bidding for Items may render the results of the auction Void. In such an event Auctioneer reserves the right to remedy the situation in whatever way best represents the seller, including canceling the existing bid.


AUCTION PURCHASE TERMS & REMOVAL AGREEMENT

MAGNETICS, DIVISION OF SPANG & COMPANY 110 Delta Dr., Pittsburgh, PA 15238

BIDDING ENDS: WEDNESDAY, MAY 27, 2020 -10:00 AM

All purchasers of items at the Magnetics, Division of Spang &. Company auction conducted by Cincinnati Industrial Auctioneers, Inc. hereby agree to the following:

All purchasers agree to abide by the "Terms of Sale" as listed on our website and posted at the auction premises. The Auctioneer and Owner make no warranties express or implied as to merchantability, fitness for purpose, or condition of the articles being sold. All such expressed or implied warranties are expressly excluded hereby. All Bidders must execute the COVID-19 Health Screening Questionnaire &. Self Declaration Sheet. All Bidders must comply with Social Distancing Policies &. any other policies as requested by Magnetics (Seller) and the state of Pennsylvania.

All items are purchased onan "Asls, Where ls" basis, with the purchasertoincurallcosts in conjunction with the loading, shopping and removal of the items from the premises. ALL EQUIPMENT MUST BE REMOVED IN A WORKMAN LI KE MANNERANDALLUTILITIESMUSTBECAPPED. ALLANCHORBOLTSMUSTBE CUTOFF AT FLOOR LEVEL. ALL OILSANDCOOLANTSMUSTBEREMOVEDFROMMACHINESPRIORTOREMOVAL. All items areavailablefor removal during normal business hours through Friday, June 5, 2020 at 4:00 PM at whichtimeour representatives will leave the premises. Afterthistimearrangementsforremovalmustbe made by appointment with Auctioneer.

"TIME IS OF THE ESSENCE" regarding the removal of items from the premises. All items must be removed by Friday, June 5, 2020 at 4:00 PM. Any items remaining after this time will be removed and stored at the expense of the buyer, subject to rent/ access fees. NO EXCEPTIONS!

All purchasers and/or riggers of machinery MUST provide Cincinnati Industrial Auctioneers, Inc. and Magnetics, Division of Spang & Company a certificate of insurance in the amount of $2,000,000.00 prior to removal. Cincinnati Industrial Auctioneers, Inc. and Magnetics, Division of Spang & Company must be named on the policy as co-insurer.

ThereareNOREFUNDS, NO EXCHANGES, NOGUARANTEESORNOWARRANTIESonanyitem,andALLSALESARE FINAL.

Accepted By Purchaser:

Company Name

Buyer Number/ Username

Signature Date

Magnetics, Division of Spang & Company- PA May 27,2020


COVID-19 Symptom Self-Screening Form for Auction Bidders

This Is to be used for self-screening prior to entering the Auction site. This form Is being provided as a tool to ensure bidders do not enter the premises if they are sick. The document does not need to be submitted or executed, If either of the first two symptoms or at least two of the symptoms In the second part of the list below are present and are not due to known, non-worsening chronic conditions, please do not enter the Auction site.

If one of these symptoms is present:

[I Cough I] Shortness of breath

Or at least two of these symptoms are present, do not come to work:

11 Fever at 100.4 degrees or above

□ Chills [] Repeated shaking with chills 11 Tiredness 0 Muscle aches and pains C Sore throat

□ Diarrhea

□ Nausea D Runny nose

□ Headache

□ New loss of taste or smell

To reiterate, If you have either of the first two symptoms or at least two of the symptoms In the second part of the list, do not enter the Auction premises,

In addition, do not enter the auction site if you have been In a household or have had close contact within 6 feet of an individual with confirmed or suspected COVID-19.

NOTE: MASKS ARE REQUIRED TO BE WORN AT ALL TIMES ON PREMISES.

Spang/ Magnetics will ask you to confirm that the above statements are

correct prior to entering the auction facility.

Buyer# ___ _ Signature _____ _ Date:. ____ _

Company ____ _ Name: _____ Phone: _____ _

HR-707-05-20

Lot Num Qty.

1 2

3 4 5

6

7 8

9

10

11

12

13 14 15 16 17 18 19 20 21 22 23 24 25 26

27

CINCINNATI IND. AUCTIONEERS, INC. 2020 DUNLAP STREET CINCINNATI, OH 45214

513-241-9701

Page 1

Catalog for Auction:Magnetics, Division of Spang & Co. This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy,

genuineness, authenticity, description, weight, count or measure of any of the lots specified herein.

Description Lot Num Qty. Description

(LOT) (2) BOXES OF SCREWDRIVERS 28 (LOT) TEST GEAR ON SKID INCLUDING K&H (LOT) (2) BOXES OF COMBINATION MODEL 59108 FUNCTION GENERATOR, WRENCHES TEKTRONIX DIGITIZING OSSILLOSCOPE, (LOT) (2) BOXES OF ALLEN WRENCHES ALLEN TEST SET, MIXER UNIT BOX OF PLIERS 29 MAGNETIC CONSTANT CURRENT FLUX (LOT) BOX OF MISC, HAND TOOLS TEST UNIT INCLUDING HACK SAW, PIPE WRENCH, 30 14" PISTORIUS MODEL D WET CUT-OFF FLARING TOOL, C-CLAMP AND OTHER SAW; S/N 43143, MASTER FLEX CONSOLE (LOT) CENTRAL PNEUMATIC IMPACT 1/4", DRIVE PNEUMATIC HACK SAW, GREASE GUN 31 (LOT) (60) 14" CUT-OFF BLADES BY LECO (LOT) HAMMERS AND MALLETS 32 ESMA MODEL E3997RC TABLE TYPE (LOT) (3) 3/8" ELECTRIC DRILLS - DEWALT, ULTRASONIC WASHER; S/N 397RC-14 SKIL, BLACK & DECKER 33 (LOT) (2) FILTERS WITH WIKE GAGES (LOT) 1/2" POWER-KRAFT ELECTRIC DRILL 34 17" ENCO MODEL 40030 TABLE TOP TYPE AND INTERNATION ROUTER DRILL PRESS; S/N 236517, 10" X40" TABLE (LOT) WESTWOOD TAP AND DIE SET & BOX 35 (LOT) (2) BOXES OF STARLITE SUPER OF ASSORTED SOCKETS ABRASIVE DIAMOND & CBN TOOLS; (LOT) TRI-POD STYLE WORK LIGHT, 48" APPROX. (55) PIECES LEVEL AND HIGH VISCOSITY LEVER ACTION 36 (LOT) PHOTO AND PROJECTION ITEMS; (2) PUMP TOSHIBA PROJECTORS, POLAROID (LOT) ACETYLENE TORCH WITH HOSES CAMERA, POLAROID POWER PACKS, AND GAGES CABLES HAND OPERATED GREASE PUMP 37 (LOT) CORNELL DECADE RESISTORS, 4-WHEEL HAND BARREL CART CAPACITORS 2-WHEEL HAND CART 38 (LOT) LIXIE MACHINE FEET HYDRAULIC DIE CART 39 (LOT) (50) FISHER SCIENTIFIC TESTING LIFT TRUCK STYLE BARREL MOVER SIEVES (LOT) CART WITH 9 EMPTY TOOL BOXES 40 (LOT) BUEHLER POLISHING CLOTH (LOT) (4) 15" X 26" ORANGE CARTS 41 30" X 72" DUAL SLIDING DOORS CABINET; (LOT) (2) 16" X 36" WAREHOUSE CARTS FORMICA TOP (LOT) (2) 16" X 36" WAREHOUSE CARTS 42 30" X 72" DUAL SLIDING COORS CABINET; (LOT) (2) 16" X 36" WAREHOUSE CARTS WOOD TOP (LOT) (2) 16" X 36" WAREHOUSE CARTS 43 30" X 72" DUAL SLIDING COORS CABINET; OPEN WOOD TOP OPEN 44 30" X 72" DUAL SLIDING COORS CABINET; AMPAK MODEL TP1824A HEAT SEAL WOOD TOP PACKING MACHINE; S/N 02-1024, 18" X 24" 45 30" X 72" DUAL SLIDING DOORS CABINET PLATEN WITH WOOD TOP AND UNDER COUNTER (LOT) SKID OF ASSORTED ELECTRICAL TOP PULL OUT DRAWER TEST PIECES INCLUDING DC AMP METERS, 46 30" X 72" DUAL SLIDING DOORS CABINET LEADS & NORTHUP MODEL 5305 TEST WITH WOOD TOP AND UNDER COUNTER SETS, GENERAL RADIO VARIABLE TOP PULL OUT DRAWER INDUCTORS, AND OTHERS; APPROX. (22) 47 30" X 72" DUAL SLIDING DOORS CABINET PIECES ON SKID WITH WOOD TOP

48 30" X 72" DUAL SLIDING DOORS CABINET WITH WOOD TOP

Lot Num

49

50 51

52

53

54

55

56

57

58

59

60

61

61A 62

63

64


513-241-9701

Catalog for Auction:Magnetics, Division of Spang & Co.

Page 2

Qty. Description Lot Num Qty. Description

30" X 72" DUAL SLIDING DOORS CABINET 65 (LOT) HP 6111A DC POWER SUPPLY, WITH WOOD TOP CLARKE-HESS 255 DIGITAL V-A-M METER 36" X 68" STEEL TABLE AND ELECTRONIC MEASUREMENT ESS GORMAN MODEL "PRODUCTOR II" TOROID POWER SUPPLY COIL WINDER MACHINE WITH MANUAL 66 (LOT) EDC AC-DC CURRET CALIBRATOR GORMAN MODEL "PRODUCTOR 11" TOROID AND FLUKE 5200A PROGRAMMABLE AC COIL WINDER MACHINE" NO MANUAL" CALIBRATOR ANATECH MODEL HUMMER 6.2 SPUTTER 67 1 (LOT) SOLA MINI-MICRO COMPUTER COATING MACHINE; S/N 1021121 REGULATOR AND YOKOGAUC WT3000

1 BUEHLER PNEUMET I MODEL 20-1390-115 PRECISION POWER ANALYZER MOUNTING PRESS; S/N 269-PNN-19, WITH 68 (LOT) (2) WALKER-MAGNEMETRICS MODEL MODEL 20-2223 WORKHEAD, WITH EXTRA MG3A GAUSSMETERS WORKHEADS 69 HP 4192A LF IMPEDENCE ANALYZER

1 10" DUAL SPINDLE LAPPING MACHINE, 70 HP 4192A LF IMPEDENCE ANALYZER SEPERATE VARIABLE SPEED CONTROLS 71 S&H INDUSTRIES 30" WIDE BENCH TYPE LABELED 0-100 ABRASIVE BLAST CABINET (LOT) SKID OF ASSORTED VALVES AND 72 BLUE M ELECTRIC MODEL VP-100 REGULATORS AND FILTERS CONTROLLED RELATIVE HUMIDITY SUN ELECTRIC MODEL ECl-3W ELECTRIC CHAMBER; S/N A-609, TEMP. RANGE TO 170 TEST CHAMBER; S/N AA2772, DEGREES F TEMPERATURE RANGE -73 TO 400 73 INTERNATIONAL EQUIPMENT MODEL HN DEGREES CELCIUS, CHAMBER CENTRIFUGE; S/N 24875M-7, 8 INTERNAL DIMENSIONS: 14" LR X 12" FB X 12" HIGH, POCKETS WITH (4) EXTRA DOORS DESIGNED FOR 74 CLAY-ADAMS (DYNAC) CAT. NO. 0101 SPECIFIC TESTING CENTRIFUGE; S/N 17701, 4 INTERNAL SIGMA SYSTEMS MODEL 18RCC TEST POCKETS CHAMBER; S/N 785, 120 VOLT, CHAMBER 75 1 HP WELCH SCIENTIFIC MODEL 1397 DIMENSIONS: 10" LR X 10" FB X 10" HIGH, VACUUM PUMP; S/N 21428 ANALOG READOUT 76 FISHER SCIENTIFIC VACUUM PUMP SIGMA SYSTEMS MODEL 18R TEST 77 3/4 HP TEEL FLUID PUMP CHAMBER; S/N 782, 120 VOLT, CHAMEBR 78 (LOT) FUJI ELECTRIC RING COMPRESSOR, DIMENSIONS: 1 0" X 1 0" X 1 0" WITH (1) EXTRA GASST MODEL L-0522-P134A VACUUM DOOR FOR SPECIFIC TESTING PUMP AND COLE-PARMER MODEL 7530-40 SUN ELECTRIC MODEL ECO1 TEST AIR PUMP CHAMBER; S/N C1559, CHAMBER 79 GRIEVE MODEL CR-326 ELECTRIC BENCH DIMENSIONS: 12" LR X 11" FB X 11" HIGH, TYPE LAB OVEN, 450 DEGREE MAX. TEMP, WITH EXTRA DOOR FOR SPECIFIC TESTING CHAMBER DIMENSIONS: 28" LR X 24" FB X STATHMAN MODEL SD-60-5R-B 18" HIGH TEMPERATURE TEST CHAMBER; S/N 2200, 80 PRECISION CAT. NO. 51221126 LAB OVEN; MAX. TEMP 525 DEGREES F, CHAMBER S/N 60102175, 65 TO 200 DEGREE CELCIUS, DIMENSIONS: 10" LR X 9" FB X 7" HIGH, WITH CHAMBER DIMENSIONS: 18" LR X 15" FB X EXTRA DOOR 15" HIGH 30" X 72" WOOD TOP CABINET 81 BLUE M ELECTRIC MODEL OV-8A LAB (LOT) HP 53348 UNIVERSAL COUNTER AND OVEN; S/N XA-516, TEMP. RANGE 38 TO 260 EDC DC REFERENCE VOLTAGE STANDARD DEGREES CELCIUS (LOT) GENERAL RADIO 1316 OSCILLATOR 82 36" X 72" STEEL TABLE AND AUTO PRECISION SYSTEM TWO 2222 83 36" X 72" STEEL TABLE DSP 84 36" X 72" STEEL TABLE (LOT) (2) KEPCO PAINT NO. 85 36" X 72" STEEL TABLE 05869-SCON-361935-011 POWER SUPPLIES 86 36" X 72" STEEL TABLE

Lot Num

87 88 89 90

91

92

93

94

95 96

97

98 99 100 101 102

103

104

105 106 107

108

109

110 111


513-241-9701

Page 3


Qty. Description Lot Num

36" X 72" STEEL TABLE 112 36" X 72" STEEL TABLE

1 36" X 72" FORMICA TOP BENCH 1 36" X 72" WOOD TOP BENCH WITH SIDE

DRAWERS 113 (LOT) SKID OF ASSORTED ELECTRICAL COMPONENTS INCLUDING DISCONNECTS, SWITCHER, WIRE, ELECTRICAL CORDS 114 15 KVA REX TRANSFORMERS, NO. 115 BC15H-X150-E3R 25 KVA MAGNETICS TRANSFORMER; NO. OX900-28 116 (LOT) (4) GENERAL ELECTRIC CAT. NO. 117 TH3223J HD SAFETY SWITCHES, 240 MAX VOLTS, 100AMP" NO BENCH•• 118 (LOT) SKID OF HANGER HARDWARE (LOT) 27-DRAWER CABINET AND (2) CARD FILES (LOT) (3) SPECIMAN HOLDING CABINETS- 119 (6) DRAWERS/CABINET 2-DOOR STEEL CABINET 120 SAFE-T-WAY SAFETY STORAGE CABINET (LOT) (2) 12" X 10" LAB STORAGE CASES 121 12" X 18" LAB STORAGE CASE ZEISS MODEL AXIOVERT 25CA INVERTED REFLECTED-LIGHT MICROSCOPE; SIN 665714, WITH ZEISS SNT-12V-100W 122 CONTROLLER

1 BUEHLER UNITRON MODEL 123 VERSAMET-INUTRON MICROSCOPE; SIN 5223, Bl-16-327-1.5X LENSE, WITH BOX OF 124 ACCESSORIES 125 ERNST LEITZ TYPE 60366002 MICROSCOPE; SIN 633056, 15 WATT LEITZ NO. 629736 MICROSCOPE DO-ALL GAGE BLOCK SET (LOT) PIN GAGES INDEXES, SMALL 126 DIAMETER 127 (LOT) VERSAMET PHOTO EXPOSURE METER, LEITZ TYPE REDY TRANSFORMER, 128 ATRIX MINI VACUUM, RAID-MAX 380 WATT 129 INVERTER (LOT) KING BRUNELL SCOPE, SOKKISHA MS16 VIEWER, CROSS SLIDE TABLE, WEIGHTS 130 MANTIS ELITE VIEWER MSA MODEL A PUMP CALIBRATOR 131

Qty. Description

(LOT) BACHARACH MODEL LEAKATOR-10 GAS DETECTOR, ELCOMETER MODEL 106 ADHESION TESTER, TSI MODEL 8360 AIR METER (LOT) TROEMINER CAT. NO. 12621-104 HEAT BLOCK, POLLARD GEOPHONE, BUFFALO DENTAL NO. 2 VIBRATOR APC 350 VA-210 WATTS, BATTERY BACK-UP BROOKFIELD MODEL DV-111 PROGRAMMABLE RHEOMETER W/ (2) BROOKFIELD LV SPINDLE SETS OPEN FISHER-SCIENTIFIC MODEL 955 MINI PH METER (LOT) MONROE 7130 CALCULATOR, CANNON MP21DX 2-COLOR PRINTING CALCULATOR, VICTOR PL8000 CALCULATOR (LOT) PROTO 4-DRAWER TOOL BOX AND KENNEDY 2-DRAWER TOOL BOX HERMES TABLE TOP ENGRAVER; S/N 116860, WITH ACCESSORIES WESTERN INNOVATOR MODEL BIHP-3-8 INDUSTRIAL MANIFOLD; SIN 26455, MAX PRESSURE - 3,000 PSIG, TEMP. LIMITS -20 TO 120 DEGREES F (LOT) (2) ARROW 1750 MIXERS WITH DAYTON AND LUTRON SPEED CONTROLS (LOT) SMALL BALL MILL AND BOX OF TRANSFORMERS LEITZ MODEL 115 TRANSIT (LOT) OMEGA VIBRATION METER AND DAVIS MODEL 100-VT AIR VELOCITY/TEMPERATURE METER AND IDEAL VOLTAGE TESTER AND STARRETT DIAL INDICATOR (LOT) (4) MAGNEHELIC GAGES (LOT) LOAD CELLS UP TO 85 TONS, (4)

PIECES (LOT) (3) MICRO-MINI DRILL INDEXES 7" X 10" CENTRAL MACHINERY BENCH TYPE PRECISION MINI LATHE WITH TOOLPOST AND (2) EXTRA CHUCKS, 0-2,500 RPM, WITH BOX OF ACCESSORIES WILSON MODEL 4-OUR-RB HARDNESS TESTER; SIN 1634 WILSON TT-RB HARDNESS TESTER; SIN 2528

Lot Num

132

133

134

135 136 137 138

139

140

141 142

143

144

145

146

147

148


513-241-9701

Page4


Qty. Description Lot Num

(LOT) ASSORTED ROCKWELL TEST 149 BLOCKS - APPROX. (20) PIECES OF VARIOUS SIZES 150 CIMETRIX MODEL BPX-301 METAL HARDNESS TESTER 151 SUBURBAN TOOL MODEL MG-5CV-31 CENTERING FIXTURE; 7" BETWEEN CENTERS 152 6" WESTWOOD BENCH GRINDER VARIABLE SPEED DRIVE UNIT 153 SRO MODEL DG80M DRILL SHARPENER BUEHLER "ISOMET" 11-1180 LOW SPEED 154 SAW TORIT MODEL VS-1200 PORTABLE DUST 155 COLLECTOR; SIN 18670615, 3 HP TRIP-LITE MODEL SRCOOL24K PORTABLE 156 ROOM AIR CONDITIONER (LOT) (2) QUARTET ELECTRONIC CARTS 157 (LOT) ASSORTED LAB GLASS ON (4) SECTIONS OF SHLEVING INCLUDING VARIOUS SIZE BEAKERS, LARGE BOWLS, FISHER DISPOSABLE BEAKERS, PHARMACIST MIX BOWLS, 158 PSYCHROMETERS AND OTHER MICRO-TOOL MODEL T-236 FOIL ASSEMBLY WINDING MACHINE, (3) 14" WIDE PAY-OFF MANDRELS, 14" PAPER MANDREL, TOP 159 MOUNTED FOIL SEAMER, 24" RE-COIL MANDREL, FOWARD REVEISE CONTROLS, (4) TENSION BRAKE CONTROLS (LOT) ASSORTED NICKEL SCRAP INCLUDING (4) DRUMS OF NICKEL CORES 160 THAT ARE A MIXTURE OF GRAY MPP@ APPROX. 82% NI - 16% FE - 2% MO AND 161 KHAKI HIGH FLUX CORES @APPROX. 50% 162 NICKEL - 49% FE - 1 % MO; ALSO (2) GAYLORDS CONTAINERS OF NICKEL SWP 163 TAPE@ 50% NICKEL AND IRON ON 3/4/2020, THE WEIGHT OF (4) BARRELS IS 2,014 LBS AND THE GAYLORDS OF TAPE IS 294 LBS. 164 (LOT) ASSORTED STEEL AND ALUMINUM 165 SCRAP ON (4) SKIDS INCLUDING PIPE ANGLE, CHANNEL AND VARIOUS SIZE 166 CUT-OFFS (LOT) STEEL RACK WITH (28) SHEETS OF STEEL, 1/8" THICK AND 30" X 47" 167 (LOT) (2) 36" HIGH X 9' LONG RAILINGS FOR STEPS 168 (LOT) (8) 24" X 72" FOLDING TABLES -FORMICA TOPS

Qty. Description

5 HP KELLOG AMERICAN MODEL 335TUX SINGLE STAGE AIR COMPRESSOR 36" X 72" X 6" THICK ACORN WELDING TABLE•• NO STAND" 72" NIAGRA MODEL 1R6-10GA ONE SERIES POWER SHEAR; S/N 61889, MANUAL BACK GAGE 48" NATIONAL MODEL 4812 FINGER BRAKE; S/N 734-1002, 12-GAGE RIDGID MODEL 801 POWERED PIPE THREADER; S/N 810145 NO. 1 D1-ACRO 6" X 6" HARD NOTCH ER; S/N A-4638 1/2 HP BALDOR CAT. NO. 500 DE CARBIDE TOOL GRINDER; S/N A559-343 DYNATRONIX "DYNA-PULSE" ELECTRO PLATER DCM TECH MODEL 18-180 VERTICAL SPINDLE ROTARY SURFACE GRINDER; S/N 21610, 11.2 HP, 18" DIA. CHUCK, VARIABLE SPEED ( 1,600 - 3,600 RPM), AUTO FEED, NEWALL DPS ORO 20" CLAUSING SERIES 22V SINGLE SPINDLE FLOOR DRILL; S/N 500699, 150 - 2,000 RPM, 15-1/2" X 18" TABLE, WITH (2) UNIVERSAL SAW CLAMPS 14" X 40" SHARPE MODEL 1440F TOOLROOM LATHE; S/N 23956, 6" 3-JAW CHUCK, TAILSTOCK, STEADY REST, 45 -1,170 RPM, NEWALL DP700 ORO, FOOT PEDAL (LOT) DORIAN TOOL POST WITH (10) HOLDERS JFK CO. SPINDLE FIXTURE (LOT) ASSORTED CEMENTED TOOL CUTTERS AND CARBIDE INSERTS (LOT) ASSORTED LATHE TOOLING INCLUDING LIVE CENTER, R-8 TOOL HOLDER, V-BLOCKS, EXTRA CHUCK JAWS 4-PIECE FLEX COLLET SET 8-DRAWER HO-MAK PORTABLE TOOL CHEST 1-1/2 HP BRIDGEPORT VARIABLE SPEED VERTICAL MILL (60 - 4,200 RPM), 9" X 42" TABLE, PTF, ENCO PLATINUM PLUS ORO DUMORE CAT. NO. 55-011 TOOL POST GRINDER; S/N 8300-1647, 3,450 RPM 12" BRIDGEPORT ROTARY TABLE; S/N 15661


513-241-9701

Page 5


Lot Num Qty. Description Lot Num

169 1 ANGLE PLATES: (2) 8" X 12", (1) 8" X 10", (1) 196 6" X 10" 197

170 (LOT) ASSORTED LATHE TOOLING 198 INCLUDING 8" FACE PLATE, (2) TOOL 199 POSTS, DIVIDING HEAD PLATES 200

171 6" X 12" BRALLION MAGNETIC CHUCK 172 6" X 18" HANCHETT MAGNETIC CHUCK 201 173 (LOT) TAPS 202 174 (LOT) HS DRILLS 203 175 (LOT) CEMENTED LATHE TOOLS 204 176 6" ACM VARIABLE SPEED CUT-OFF SAW 205 177 IDEAL CAT. NO. 13-005 DE-MAGNETIZER 178 (LOT) ASSORTED STEEL CUT-OFF ON RACK 206

- CONTENTS ONLY" NO RACK" 179 (LOT) STEEL CART WITH ASSORTED LEXAN

MATERIAL 180

181

182

20" DELTA MODEL 28-365 VERTICAL BAND SAW; S/N 1288150, 24" X 24" TABLE, BLADE WELDER MILLER MODEL KH-40 SPOT WELDER, 18" THROAT, SINGLE PHASE 6" X 18" DO-ALL MODEL D6-18 SURFACE GRINDER; S/N 219-68467, DO-ALL SELECTRONIC CONTROLS

183 (LOT) GRINDING WHEELS ON WALL RACK WITH SPINDLE ARBORS

184 (LOT) GRINDING WHEELS ON CART: (3) DIAMOND WHEELS, WITH CART

185 (LOT) ASSORTED BIMBA ACTIVATORS AND VALVES IN (4) CONTAINERS, APPROX. (50) PIECES

186 (LOT) WOOD RACK WITH ALL-THREAD ROD 187 (LOT) TOOLING INDEX WITH MOOSE

TAPER, DRILLS, STRAIGHT SHANK DRILLS, R-8 COLLETS

188 36" X 72" HD STEEL FRAME (3" X 3" TUBING) TABLE WITH WOOD TOP

189 (LOT) 1 TON COFFING TROLLEY, BOX OF REAMERS, GEAR PULLER

190 (LOT) 4" X 36" GRINDING BELTS 191 (LOT) SKID OF PHOTO COPY PAPER; (5)

BOXES OF 8-1/2" X 14" AND (2) BOXES OF 11" X 17"

192 HAND OPERATED WIRE UN-COILER 193 OXFORD PRECISION MODEL 3 ROTANGLE

FIXTURE, 24 DIVISIONS WITH 3-C COLLETS 194 THREADWELL TANGI-MATIC WHEEL

DRESSER; S/N 6585 195 (LOT) SMALL BORING BAR INDEX AND

COUNTER BOX INDEX

Qty. Description

DUMONT NO. 10 BROACH SET ENCO R-8 ADJUSTABLE BORING HEAD (LOT) (19) 5-C COLLETS 5-C COLLET BLOCK CHUCKS TYPE PF70/5C COLLET SPIN INDEX FIXTURE 6" HAKHORET 2-PIECE MACHINE VISE BRIDGEPORT RIGHT ANGLE ATTACHMENT ADJUSTABLE REAMER SET (LOT) LA THE TOOLING (LOT) MILL WHEEL CUTTER AND HIGH SPEED SAW BLADES INSTRON MODEL 1125 MUL Tl-FUNCTION TESTER; S/N 6210, TESTING MODES: TENSION, COMPRESSION, AND REVERSE STRESS TESTING ABOVE OR BELOW MOVING CROSSHEAD, TORSION TESTING BETWEEN BASE AND CROSSHEAD, TENSION RANGE 10 GM TO 20,000 LBS; COMPRESSION RANGE 100 GM TO 20,000 LBS; INCLUDES WEDGE ACTION GRIPS AND INSTRON CALIBRATION WEIGHTS AND CELL COMPUTER •• NEEDS REPAIR - CLUTCH WILL NOT ENGAGE "

Date post:	25-Jun-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times