Turn
in
g Your Assets into Dollars
Public AuctionSURPLUS
EQUIPMENT
EVERYTHING
MUST SELL!
Asset Sales, Inc.Corporate Headquarters
301 Post Office Drive, Suite CIndian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax [email protected]
Asset Sales (Canada) Inc.4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z 1L5Tel 902.852.5331 Fax 704.821.4325
SURPLUS EQUIPMENT TO THE ONGOING NEEDS OF
KENNAMETAL INC.POWDERED METAL PROCESSING EQUIPMENT HEAT TREAT & MACHINE SHOP
481 FIRETOWER RD. - GRANT, AL 35747TUESDAY, SEPTEMBER 1ST @ 10:00 A.M. CDT
Inspection: Monday, August 31st From 8:00 A.M. - 4:00 P.M. CDT
>ALPHA 500 TON
HYDRAULIC DOUBLE ACTING POWDER
COMPACTING PRESS
<(2) BOREL PH-8 GAS SWEEP PRESSURE PRE-SINTER ELECTRIC FURNACES
MILLTRONICS ML22 CNC FLAT BED LATHE(2) CINCINNATI MILACRON CENTURAMIC 325-12 CENTERLESS GRINDERS
2005
2AVAIL.
2AVAIL.
102485_8 pager.indd 1 8/6/15 9:46 AM
MACHINERY INSPECTION DATE & TIME – MONDAY, AUGUST 31ST 8:00 A.M. - 4:00 P.M. CDT
2
VACUUM SINTERING FURNACESVacuum Sintering Furnaces with (2) Tandem Horizontal Chamber Pots, Front & Rear Door Openings, 28”W x 22”H x 56”D, 500KG, Approx. 1450°C Current Operating Temperature, Vacuum, Honeywell Computer Controls Installed Approx. 2011
Vacuum Sintering Furnace with Single Horizontal Chamber Pot, Front & Rear Door Opening, 28”W x 22”H x 55”D, 500KG, Approx. 1450°C Current Operating Temperature, Vacuum, Honeywell Computer Controls Installed Approx. 2011, Tandem Chamber Pots, (1) Used for Parts Only
VACUUM PRE-SINTER FURNACES(2) BOREL Model PH-8 Gas Sweep Pressure Pre-Sinter Electric Furnaces with Horizontal Chamber Doors, 900°C / 1000°C Operating Temperatures, 25”W x 22”H x 40”D Capacity, SIEMENS Computer, Controls, sn:25536 (1000°C) mfg.12/2007 ● sn:7961 (800°C) mfg.2/2000
HOT PRESS FURNACEABRA Vertical Hot Press Furnace (Used for Straightening) Model HMR25/59-VAC-1350 with 9” Diameter x Approx. 24”H Work Area, Hydraulics, Vacuum & Transformer, Load Cart with Assembly Table, Honeywell Computer Controls Installed 2013, sn:502/90, mfg.1990
VACUUM SINTERING FURNACE WITH (2) TANDEM HORIZONTAL CHAMBER POTS
Download a lot book at www.asset-sales.com or call (888) 800-4442 for more information
(1 OF 2) BOREL PRE-SINTER FURNACES
3AVAIL.
ABRA VERTICAL HOT PRESS FURNACE
2AVAIL.
ALPHA 500 TON HYDRAULIC DOUBLE ACTING POWDER COMPACTION PRESS
BEST (GASBARRE) 250 TON HYDRAULIC DOUBLE ACTING POWDER COMPACTION PRESS
DAKE 75 TON ELEC-DRAULIC SINGLE ACTION HYDRAULIC COMPACTION PRESS
2001
102485_8 pager.indd 2 8/6/15 9:46 AM
AUCTION SALE DATE & TIME – TUESDAY, SEPTEMBER 1ST 10:00 A.M. CDT
3
COMPACTION PRESS TOOLING
NUGIER 200 TON ELEC-DRAULIC HYDRAULIC COMPACTION PRESS
COMPACTING PRESSESALPHA 500 Ton Hydraulic Double Acting Powder Compaction Press Model 503D-14L with Bolster, 14” Stroke, 14” Die Opening, Controls, Flush Floor Mount, sn:500305
Huge Assortment of Die Molds & Tooling
BEST (GASBARRE) 250 Ton Hydraulic Double Acting Powder Compaction Press Model 250TCNC with Approx. 14” Die Mold Capacity, Bolster, Approx. 12” Stroke, Powered Feed Shoe, SIEMENS Computer Controls (Microsoft Interface), Flush Floor Mount, sn:MH50302, mfg. Approx. 2001
NUGIER 200 Ton Elec-Draulic Single Action Hydraulic Compaction Press Model H200MDIOHVPS with Adjustable Rail, Traveling Ram, 47” Between Uprights, Bolster & Enclosure, sn:1702
DAKE 75 Ton Elec-Draulic Single Action Hydraulic Compaction Press with Extraction Pin, 36” Between Uprights, Recent Install GE Fanuc Quick Panel View PLC Controls
ISOSTATIC PRESSESMORRIS 30,000 PSI Isostatic Press with Approx. 26” Diameter x 15-1/2”L Capacity, with Hydraulics & Controls Readout
KJ MORRIS 35,000 PSI Isostatic Press Model DBI-300-35K-500C-8458 with Hydraulics & Controls
EXTRUDER PRESSBAKER PERKINS APV EX Type Lex 8 Extruder Press, Portable, Digital Readouts & Controls, sn:3660, mfg.1998
CARBIDE GRINDER, SLICERS(3) DRESHMAN & SONS Diamond Wheel Slicers with Approx. 6” Diamond Wheels, Pneumatic Feed, Workstop & Dust Collectors
Carbide Centerless Grinding Machine (Rounder) with 18” Diamond Grinding Wheel, Regulating Wheel, Work Rest, Manual & Auto Feeds
KJ MORRIS 35,000 PSI ISOSTATIC PRESS MORRIS 30,000 PSI ISOSTATIC PRESS
ATTENDING THE AUCTION IN PERSON?What you need to bring.....
• Your Driver’s License • Business Card• Tax Exempt Form if Non Taxable
• Bank Letter of Guarantee if Paying via Company Check
(2 OF 3) DRESHMAN & SONS DIAMOND SLICERS
3AVAIL.
BAKER PERKINS EXTRUSION PRESS ROUNDER CENTERLESS DIAMOND WHEEL GRINDER
2AVAIL.
102485_8 pager.indd 3 8/6/15 9:47 AM
MACHINERY INSPECTION DATE & TIME – MONDAY, AUGUST 31ST 8:00 A.M. - 4:00 P.M. CDT
4
DOUBLE DISC GRINDERWAIDA Model SWG-3AN Double Disc Grinding Machine with Assorted Carrier Plates, (2) 5.5 KW Drive Motors, Discharge Conveyor & Coolant System, sn:242, mfg.1996
WAIDA (Parts Machine) Model SWG-3N Double Disc Grinder, sn:243
CNC CENTERLESS GRINDERSAGATHON Model 350-SL CNC Centerless Grinder with 6-1/4” Wide Grinding Wheel, Auto Regulating Wheel, Auto Micrometer Adjust Dresser, Thru Feed, Help-Tec Automation Feeder, Discharge Conveyor, Enclosure & Agathon TEG17 CNC Controls, sn:720000186, mfg.2005
AGATHON Model 150-SL 20D PLC Centerless Grinder with 2-1/2” Wide Grinding Wheel, Regulating Wheel, Automatic Micrometer Adjust Dresser, Thru-Feed Mechanism & Discharge Conveyor, Work Rest, PLC Controls, sn:750001306, mfg.2005
TRANSOR Coolant Filtration System Model FWC-80-TRP, sn:05222565, mfg.2005 (supports both Agathon’s)
CENTERLESS GRINDERS(2) CINCINNATI MILACRON Model Centuramic 325-12 Centerless Grinders with 10” Wide Grinding & Regulating Wheels, Wheel Dressers, In Feed & Thru Feed Cycles, Updated Wright-K Technology Controls, Coolant, sn:350412H79-0034, sn:350412H79-0044
WAIDA DOUBLE DISC GRINDER
AGATHON 350-SL CNC CENTERLESS GRINDER AGATHON 150-SL 20D PRECISION CENTERLESS GRINDER
2005
TRANSOR FILTRATION SYSTEM
(2) CINCINNATI 325-12 CENTERLESS GRINDERS
2AVAIL.
CINCINNATI R55 CYLINDRICAL GRINDER
(1 OF 2) HARIG GR30 SURFACE GRINDER
2AVAIL.
CYLINDRICAL & SURFACE GRINDERS, T&C GRINDERSCINCINNATI Model #R55 10” x 20” Universal Cylindrical Grinder with Variable Speed Headstock, Tailstock, 5 ‘C’ Collet Chuck, Coolant, Dust Collector & Controls, sn:M27890
(2) HARIG Model GR30 618 Hogger / Super 618 Surface Grinders with Workholding Devices & Controls
(2) CINCINNATI No.2 Tool & Cutter Grinders
GALLMEYER & LIVINGSTON Model 350 with 16” x 23” Hydraulic Surface Grinder with O.S. Walker Electro-Magnetic Chuck, Overwheel Dresser, Controls & Coolant, sn:350258
2005
102485_8 pager.indd 4 8/6/15 9:47 AM
AUCTION SALE DATE & TIME – TUESDAY, SEPTEMBER 1ST 10:00 A.M. CDT
5
(2) HARDINGE OMNITURN CNC LATHES
COOLANT FILTRATION SYSTEMHYDROFLOW Model SF-8000 8400 Gallon Coolant Filtration System with 400 GPM Flow Rate, sn:95275
CNC LATHES, MILLING MACHINEMILLTRONICS Model ML22 CNC Flat Bed Lathe with 23” Swing x 46” Centers, Tailstock, 10” Diameter 3-Jaw Chuck, Cross Slide, Full Enclosure, Milltronics Centurion 7 CNC Controls, sn:8634, mfg.2005
(2) HARDINGE Omniturn CNC Gang Turn Lathes with 2-Axis (1) with 5 ‘C’ Collet & Closer, (1) with 5” Diameter 6-Jaw Chuck, Cross Slide with Gang Tools, Omniturn CNC Control & Keyboard, sn:CNC276 with Chuck, sn:DV59-15801 with 5 ‘C’
TREE JOURNEYMAN 350 3-Axis CNC Knee Mill with 10” x 39” T-Slot Table, #40 Taper Spindle, Autocon Dynapath Delta CNC Pendant Control, sn:203100131, mfg.1996
VERTICAL BANDSAW & MILLING MACHINE
ROLL-IN JOURNEYMAN 19” Vertical Bandsaw with Diamond Tipped Saw Blade, Variable Blade Speeds & 32” x 40” Hydraulic Feed Tilt Worktable, sn:8157
W.F. WELLS L-9 9” x 16” Horizontal Bandsaw with Vise & Coolant, sn:773919
BOICE 13-1/2” Vertical Bandsaw with Tilt Table
ENGINE LATHES & MILLING MACHINES
LODGE & SHIPLEY 18” x 30” Centers to Tailstock Engine Lathe with 10” 3-Jaw Chuck, Spindle Speeds to 1160 RPM & Threading
HARDINGE Model DV-59 Tool Room Lathe with 5” 6-Jaw Chuck, Variable Speeds to 3500 RPM, 5 ‘C’ Collet Closer, Tailstock & Cross Slide, sn:DV-59-15362
BRIDGEPORT Series I 2HP Milling Machine with R8 Spindle, Variable Spindle Speeds, 9” x 36” Table, sn:163361
BRIDGEPORT Series I 2HP Vertical Milling Machine with R-8 Spindle, Variable Spindle Speeds, 9” x 42” Power Feed Table, 2-Axis Digital Readouts, sn:202009
CINCINNATI NO.2 TOOL & CUTTER GRINDER
HYDROFLOW 8400 GALLON FILTRATION SYSTEMMILLTRONICS 23" X 46" CNC LATHE
2005
TREE JOURNEYMAN 350 CNC KNEE MILL
Can’t Attend the Sale? Still Want to Bid? Visit Our Website at www.asset-sales.com For More Bidding Options. Check Out Our Upcoming Auction Calendar! You Can Also Sign Up to Receive
Email Notifications by Joining Our Mailing List!
JOURNEYMAN VERTICAL BANDSAW
2AVAIL.
www.asset-sales.com
102485_8 pager.indd 5 8/6/15 9:47 AM
MACHINERY INSPECTION DATE & TIME – MONDAY, AUGUST 31ST 8:00 A.M. - 4:00 P.M. CDT
6
MEZZANINES, PALLET RACKING(30+) Sections of Pallet Racking, 2 & 3 Level
15’ x 30’ Self Supported Mezzanine with Stairs & Electrical Lighting
28’W x 36’L x 11’H Self Supported Mezzanine with Stairs, 2000lb Capacity Elevator Platform Lift & Electrical, Bolt Together Structure
MATERIAL HANDLING 2 Ton Portable Gantry Crane with Approx. 15’ Between Frames, 8’ Under Hoist & Pendant Controls
E-Z-RIDER Portable Elevating Work Platform Lift with 300lb Holding Capacity
COFFING 3 Ton Hoist with Pendant Control & Power Trolley
YALE Model NRO35 Stand-Up Electric Forklift with 3500lb Capacity, Battery Charger, sn:N479555
AIR COMPRESSORINGERSOLL-RAND Model SSR-XFE50 60 HP Rotary Screw Air Compressor with Intellisys Digital Controls, 223 CFM, 140 PSIG, sn:F4340U91
INGERSOLL-RAND Model TMS 0280 Air Dryer, sn:TMS0280-0403/3373, mfg.2004
MISCELLANEOUS & MAINTENANCE AREA
Large Assortment of Spare Motors ● (2) TENNANT 5700 XP Electric Floor Sweeper & Squeegee ● Pressure Washers ● (2) Door Heavy Duty Parts Cabinets ● Storage Cabinets ● Shelving ● Empire Pro-Finish Blast Cabinet ● GRIEVE Model 343-Electric Oven (350°F) with 35”W x 28”H x 48”D, sn:110202 ● Numerous Material Carts ● Inspection Including Microscopes ● Calipers ● MITUTOYO Micrometers ● MITUTOYO & FOWLER Height Gages ● Concentricity Gages ● Digital Scales ● JAYGO Blender ● Huge Assortment of Push Carts ● Work Tables ● Bakers Racks ● Flammable Cabinets ● (12 +/-) Portable Tool Cabinets ● Pallet Jacks ● Huge Assortment of Halogen Light Fixtures On Pallets ● (2) GRACO Magnum LTS15 Powder Paint Guns ● Steel Work Tables ● Vises ● LISTA Cabinets ● Double End Pedestal Grinders ● Arbor Press ● MILWAUKEE & DEWALT Hand Tools ● Parts Bins & Cabinets ● Wire Carts ● Engine Hoists ● Huge Assortment Machine Parts ● VACUMASTER Heat Sealing Machine & Other Assorted Shipping Area Equipment
HARDINGE DV-59 TOOL ROOM LATHE
(1 OF 2) BRIDGPORT SERIES I MILLS
2AVAIL.
INGERSOLL-RAND 60 HP AIR COMPRESSOR & DRYER
YALE ELECTRIC FORKLIFT
PLATFORM LIFT
MAINTENANCE BANDSAWS
OFFICES
DUST COLLECTORS25 +/- TORIT DONALDSON Models 64, 75, 84’s, VS1500’s, Etc.., Portable & Stationary Dust Collectors
VIBRATORY DRYERSROSEMONT Model RDO.10.8 COB Type Vibratory Dryer with Controls, sn:2132
SWECO Model FMD-3HA COB Type Vibratory Dryer with Controls, sn:3FM-1171-8
VIBRODYNE Model VE600 Vibratory Finisher with 20” x 37” Poly Liner, Water Tank & Controls, sn:D06-506
OFFICESDesks ● Credenzas ● Bookshelves ● Partitions ● File Cabinets ● Etc….
102485_8 pager.indd 6 8/6/15 9:47 AM
AUCTION SALE DATE & TIME – TUESDAY, SEPTEMBER 1ST 10:00 A.M. CDT
7
Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items. Buyers May Pick Up Their Items at the Auction Location or Can
Arrange for a Third Party Logistics Firm to Manage the Removal Process for Them.
102485_8 pager.indd 7 8/6/15 9:47 AM
Turn
ing Y
our Assets into Dollars Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – Alabama License #1774
REAL ESTATE AVAILABLE FOR SALE• 82,000 SQ. FT ON 20 ACRES - OFFICE AREA 7,000 SQ FT.
• TRUCK DOCKS: (2) DOCK LEVEL & (2) DRIVE IN• AC / HEAT
• GAS / WATER • 3 PHASE / 480 VOLTAGE
CONTACT JEREMY POPE, CCIM, SIOR WITH GRAHAM & CO. @ (256) 382-9010
FOR MORE INFORMATION
DIRECTIONSFROM HUNTSVILLE INT. AIRPORT: Exit Airport to I-565 / US-72E follow for @ 35.8 miles. Turn right onto Co.Rd 63 / Cathedral Caverns Hwy for 5.9 miles. Slight left onto Old Union Rd. Turn left onto 9th St.E / Firetower Rd. Plant will be on the left. Plant is approx. 44 miles from the airport. Follow the Auction Signs.
HOTELSCOMFORT INN & SUITES 25775 John T. Reid Pkwy - Scottsboro, AL 35769 (256) 259-8700
HAMPTON INN MADISON 9225 Madison Blvd. - Madison, AL 35758 (256) 464-8999
UPCOMING AUCTIONSTHURSDAY, AUGUST 20th -Northstar Metal ProductsLate Model Amada Fabrication MachineryAddison, IL
TUESDAY, AUGUST 25th - Circor EnergyCNC Machinery, Haas, Mori Seiki & Toyoda MachineryOklahoma City, OK
PUBLIC AUCTIONPLANT CLOSED
KENNAMETAL, INC.POWDERED METAL PROCESSING EQUIPMENT,
HEAT TREAT & MACHINE SHOPGRANT, AL
TUESDAY, SEPTEMBER 1ST @ 10:00 A.M. CDT
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes.
Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.
ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.
REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
PresortedFirst Class Mail
U.S. PostagePAID
Kokomo, INPermit No. 154
THURSDAY, SEPTEMBER 17th - MPSI Late Model Haas & Mazak CNC MachinesAbbeville, LA
102485_8 pager.indd 8 8/6/15 9:48 AM