5 DAYSCERTIFIED CAT.III VIBRATION ANALYST TRAININGMachinery Vibration Analysis ( MVA )
Course dates : 18-22 May 2020Certified Examination from Vibration Institute USA
Vibro Technologies & Engineering Pte Ltd
NO PROBLEM! ONLY SOLUTIONS
COURSE DETAILSCourse ObjectiveThis course provides more in-depth discussions of single-channeltime waveform, FFT, and phase analysis technoques for the evaluationof industrial machinery. It includes acceptance testing, machineseverity assessment, use of demodulation and HFE techniques, basicrotor dynamics, Basic ODS, and single-plane balancing. This courseis partial preparation for the Vibration Analyst Category III CertificationExam
Who should attendEngineer/Chief/Mechanic/Electrician/Maintenance manager/staff who is involved in direct maintenance, trouble shootingof rotating machinery and want to enhance knowledge in bestmaintenance program and continuous improvement
Course Topics1. Advanced vibration concepts2. Single-plane balancing3. Use of single-channel FFT analyzers and data collectors4. Using data collectors and tape recorders for data storage5. Setting alarms for efficient predictive maintenance6. Determination of natural frequencies, resonance and critical speeds7. Identification of machine forces and frequencies8. Vibration correction techniques9. Isolation and damping of installed equipment10. Spectral, time waveform, phase, and orbital analysis11. Machine, specific analysis-motors, fans, pumps, compressors
Course Fees● Course Fees - USD 3000.00 per person per pax including fees. All fees subject to 7% GST.
Payment is to be made upon enrolment. Course fees include course materials and tea breaks. Excludes VI membership/ surveillance fees or fees associated to vibration institute
Terms & conditions apply
Benefits- Prepare to become a better analyst- Provide a deeper understanding of vibration principles & techniques- Ensure analyst meet the standard level of knowledge and expertise
Course Duration8:30 am - 5:30 pm ( Mon - Fri )18-22 May 2020
Course VenueVibro Training Center ( Singapore )
Exam DateThe following Tuesday after the courseExamination time : 9 am - 1 pm ( 4 hours )
About the facilitator
Jack D.Peters, Instructor from Vibration Institute USA
COURSE ORGANIZED BY
Vibro Technologies & Engineering Pte Ltd60 Ubi Crescent #01-05 UBI Techpark Singapore 408569
For course registration, contact 6749 2426 or email : [email protected]
Exam Requirement:A minimum of 3-year relevant working experience inMachinery vibration and a valid CAT.II Analyst
Mr Peters was the Vice President of International Sales for connection technology center, Inc.(2004-2016), and his international responsibilities included Asia-Pacific, Canada, and India. He workedat Eastman Kodak Company, Inc. (1977-2004) measuring, monitoring, and analyzing vibrationproblems on process manufacturing machines for photographic films and papers. He holds an AOSdegree from Alfred Agricultural & Technical College in Automative Technology, an AAS degreefrom Monroe Community College in Electrical Technology, and is a certified maintenance andreliability professional ( CMRP ). Certified as a Category IV Vibration Analyst in accordance with ISO18436-2, Mr Peters is an instructor, chairman of the training committee and a member of the board ofdirectors for the vibration institute.
