+ All Categories
Home > Documents > Pump Series K14VK SUBMERSIBLE SEWAGE PUMPS …

Pump Series K14VK SUBMERSIBLE SEWAGE PUMPS …

Date post: 17-Mar-2022
Category:
Upload: others
View: 6 times
Download: 0 times
Share this document with a friend
4
File: K14VK Dimensions Pump Series K14VK 14SUBMERSIBLE SEWAGE PUMPS Section Date ENCLOSED MAR 2015 DIMENSIONAL DATA Note: All dimensions in inches and (millimeters). Dimensions may vary due to normal manufacturing tolerances. 14” (350mm)
Transcript
Page 1: Pump Series K14VK SUBMERSIBLE SEWAGE PUMPS …

File: K14VK Dimensions

Pump Series K14VK 14” SUBMERSIBLE SEWAGE PUMPS

Section Date

ENCLOSED MAR 2015

DIMENSIONAL DATA

Note: All dimensions in inches and (millimeters). Dimensions may vary due to normal manufacturing tolerances.

14” (350mm)

Page 2: Pump Series K14VK SUBMERSIBLE SEWAGE PUMPS …

File: K14VK Liftout Dimensions

Pump Series K14VK 14” SUBMERSIBLE SEWAGE PUMPS

Section Date

ENCLOSED MAR 2015

LIFTOUT DIMENSIONAL DATA

Notes: 1. All dimensions in inches and (millimeters).2. Discharge �ange ANSI Class 125 unless noted.3. Absolute minimum and recommended minimum submergence levels noted.4. Discharge base elbow must be placed above sump bottom as noted.5. Dimensions may vary due to normal manufacturing tolerances.6. If discharge pipe is larger than discharge elbow, eccentric reducer must be used limited to 2X larger maximum.

14” (350)

17” (432)

Page 3: Pump Series K14VK SUBMERSIBLE SEWAGE PUMPS …

File: K14VK Install Dimensions

Pump Series K14VK 14” SUBMERSIBLE SEWAGE PUMPS

Section Date

ENCLOSED MAR 2015

SIMPLEX INSTALLATION DIMENSIONAL DATA

Notes: 1. All dimensions in inches and (millimeters).2. Pump spacing per (HI) Hydraulic Institute standards.3. Refer to pump dimension and liftout dimension sheets for more details.4. Recommended minimum submergence levels noted.5. Discharge base elbow must be placed above sump bottom as noted.6. Dimensions may vary due to normal manufacturing tolerances.7. If discharge pipe is larger than discharge elbow, eccentric reducer must be used limited to 2X larger maximum.

KL14

Page 4: Pump Series K14VK SUBMERSIBLE SEWAGE PUMPS …

File: K14VK Install Dimensions

Pump Series K14VK 14” SUBMERSIBLE SEWAGE PUMPS

Section Date

ENCLOSED MAR 2015

DUPLEX INSTALLATION DIMENSIONAL DATA

Notes: 1. All dimensions in inches and (millimeters).2. Pump spacing per (HI) Hydraulic Institute standards.3. Refer to pump dimension and liftout dimension sheets for more details.4. Recommended minimum submergence levels noted.5. Discharge base elbow must be placed above sump bottom as noted.6. Dimensions may vary due to normal manufacturing tolerances.7. If discharge pipe is larger than discharge elbow, eccentric reducer must be used limited to 2X larger maximum.

KL14

56(1422)


Recommended