© 2001 Vertiflo Pump Company Printed in The USA 0101The

Vert

ical

Pum

p S

peci

alis

ts

PUMPSFORINDUSTRYCONTENTS:

Introduction & User List

Product Overview

Vertical Process Pumps .............................. Series 600

Vertical Sewage Pumps .............................. Series 700

Vertical Sump Pumps .................................. Series 800

Vertical Vortex Pumps ................................ Series 900

Vertical Cantilever Pumps ......... Series1100 and 1200

Horizontal End SuctionPumps-Centrifugal ..................... Series1300 and 1400

Horizontal End SuctionPumps-Vortex ............................. Series1500 and 1600

Horizontal Self-primingPumps-Centrifugal .................................... Series 2100

Engineering Sample Specifications

MODEL 814 Quality Design Features Assure Long, Trouble-Free Service

WIDE RANGE OF APPLICATIONS:

• Industrial Process• Pollution Control• Sump Drainage• Hazardous, Toxic & Inflammable Liquids• Clear Liquids• Condensate• Corrosive Liquids

CAPABILITIES:

• Capacities to 240 GPM• Heads to 160 Feet TDH• Temperature to 210˚ F• Pit Depths to 7 Feet• Construction: Cast Iron, Bronze Fitted, 316 Stainless Steel Fitted, All 316 Stainless Steel

Medium Duty Sump Pumps

Series 800 Sump Pumps - 1

CONSTRUCTION:

Standard• Carbon graphite line-shaft bearings• Carbon graphite intermediate bearings (Pump built for pit depth over 5'-0")(4'-0"@ 3500 RPM)• High thrust, angular contact ball bearing• Product lubricated line shaft bearings• 316 stainless steel shaft• Round or square cover plate• Pump setting increments of 1'-0" for sump depths up through 7'-0"• 316 stainless steel float• Standard C face motors

800

Options• Stainless steel fitted, bronze fitted or all stainless steel construction• External flush for bearing lubrication• Various float switch enclosures• Various liquid level controls• High water alarm• Alarm bells and horns• Control Panels

Series 800 Sump Pumps - 2

PUMP COMPANY

Materials of ConstructionPart Standard 316 Stainless All 316Descripton Fitted Fitted StainlessMotor Support Cast Iron Cast Iron Cast Iron

Thrust Bearing Class 30 Class 30 Class 30Housing

Shaft Stainless Steel Stainless Steel Stainless SteelAISI-316 AISI-316 AISI-316

Column Steel ASTM-A53 Steel ASTM-A53 Stainless Steel AISI-316

Bearing Housing Cast Iron Class 30 Cast Iron Class 30 Stainless Steel AISI-316

Guide Bearings Carbon Graphite Carbon Graphite Carbon Graphite

Impeller Cast Iron Class 30 Stainless Steel Stainless SteelAISI-316 AISI 316

Casing Cast Iron Class 30 Cast Iron Class 30 Stainless Steel AISI-316

Gasket Vellumoid Vellumoid NA 700

Strainer Cast iron Class 30 Cast iron Class 30 Stainless Steel AISI-316

Discharge Elbow Cast Iron AISI-B164 Cast Iron AISI-B164 Stainless Steel AISI-316

Discharge Pipe Steel ASTM-A53 Steel ASTM-A53 Stainless Steel AISI-316

Cover Plate Steel HRS Steel HRS Steel HRS

Lip Seal Nitrile Nitrile Nitrile

1. Motor SupportAssures positive alignment of motor and pump shaft withregister fit. Normal thrust, vertical NEMA C face motorstandard

2. Flexible Coupling

3. External Impeller AdjustmentHigh performance maintained without dismantling pump

4. Thrust BearingHigh thrust angular contact bearing. Permanently lubri-cated for life

5. Gas Tight Column ClosurePrevents vapor from escaping from column

6. Cover Plate17 1/2" round or square

7. Column PipeSchedule 40 steel

8. Intermediate Bearing AssemblyFurnished as standard on pumps built for pit depths greaterthan 5'-0" at 1750 RPM and 4'-0" at 3500 RPM

9. ShaftingAccurately machined 316 stainless steel, 7/8" diameter toassure minimum deflection

10. BearingsCarbon graphite - Product lubrication is standard.Designed for clean, non-abrasive liquids.

11. ImpellerSemi-open design for wide range of industrial applications,secured to shaft with taper fit by thread

12. CasingHeavy walled casting

13. Suction StrainerCast iron

14. Discharge PipeSchedule 40, threaded; flanged connection optional

Superior Features

PUMP COMPANY

Series 800 Sump Pumps - 3

800

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Series 800 / Model 814 Size 1 1/2 X 1 X 6

Series 800 / Model 814 Size 2 X 1 1/2 X 6

Performance Curves

HP SF DIA³⁄₄ 1.15 6

1.00 6

¹⁄₂ 1.15 5 ⁵⁄₈

1.00 5¹⁄₂

¹⁄₃ 1.15 5¹⁄₈

1.00 5

HP SF DIA5 1.15 6

1.00 6

3 1.15 5 ³⁄₈

1.00 5¹⁄₄

2 1.15 4⁷⁄₈

1.00 4³⁄₄

HP SF DIA1¹⁄₂ 1.15 4⁵⁄₈

1.00 4¹⁄₂

1 1.15 4³⁄₁₆

1.00 4

HP SF DIA7¹⁄₂ 1.15 6

1.00 5⁷⁄₈

5 1.15 5 ⁵⁄₈

1.00 5¹⁄₂

3 1.15 5¹⁄₈

1.00 5

HP SF DIA2 1.15 4⁵⁄₈

1.00 4¹⁄₂

1¹⁄₂ 1.15 4¹⁄₄

1.00 4¹⁄₈

1 1.15 4

1.00 3⁷⁄₈

HP SF DIA1¹⁄₂ 1.15 6

1.00 6

1 1.15 5⁷⁄₈

1.00 4⁷⁄₈

HP SF DIA³⁄₄ 1.15 5⁵⁄₈

1.00 5¹⁄₂

¹⁄₂ 1.15 5¹⁄₈

1.00 4⁷⁄₈

Series 800 Sump Pumps - 4

PUMP COMPANY

814 Simplex Sump Pump

Not for construction unless certified, some dimensions may vary ± 1/2". Pump Construction:_____________________________________________________

PAGE 814-1Date: Nov. 1, 1989

CUSTOMER__________________________________________CUSTOMER NO._____________________PROJECT____________________________________________SERIAL NO.________________________ENGINEER___________________________________________LOCATION_________________________CONTRACTOR__________________________________________________________________________PUMP Model Size Curve No. GPM Head SP. GR.@Temp. Pump Length PlateDATA ______ _________ ___________ _____ _____ _________________ ___________ ______MOTOR Mfgr. HP RPM Volt-Phase-Cycle Frame ENC. Furnished by Mounted byDATA ___________ _____ ______ __________________ _____ _____ ____________ ______________Shop Order_____________________Certified by_____________________Date______________________

Dimensions

PUMP DATA

SIZE A C J L

1 7¹⁄₂ 6¹⁄₂

1¹⁄₂ 8¹⁄₄ 7

1¹⁄₂ 8¹⁄₂ 7¹⁄₄

2 9¹⁄₄ 7³⁄₄2 to

12

Fee

t*

1¹⁄₂ x 1 x 6

2 x 1¹⁄₂ x6

MOTOR DATA

FRAME P Q

56 C 12¹⁄₈ 5⁵⁄₈

143 TC - 145TC 12¹⁄₄ 5⁵⁄₈

182TC - 184TC 15⁷⁄₁₆ 6³⁄₈

213TC - 215TC 16¹¹⁄₁₆ 6³⁄₈

* Sump Depth is in 1 Foot Increments

PUMP COMPANY

Series 800 Sump Pumps - 5

800

814 Duplex Sump Pump

Not for construction unless certified, some dimensions may vary ± 1/2". Pump Construction:_____________________________________________________

PAGE 814-2Date: Nov. 1, 1989

CUSTOMER__________________________________________CUSTOMER NO._____________________PROJECT____________________________________________SERIAL NO.________________________ENGINEER___________________________________________LOCATION_________________________CONTRACTOR__________________________________________________________________________PUMP Model Size Curve No. GPM Head SP. GR.@Temp. Pump Length PlateDATA ______ _________ ___________ _____ _____ _________________ ___________ ______MOTOR Mfgr. HP RPM Volt-Phase-Cycle Frame ENC. Furnished by Mounted byDATA ___________ _____ ______ __________________ _____ _____ ____________ ______________Shop Order_____________________Certified by_____________________Date______________________

Dimensions

PUMP DATA

SIZE A C J L

1 7¹⁄₂ 6¹⁄₂

1¹⁄₂ 8¹⁄₄ 7

1¹⁄₂ 8¹⁄₂ 7¹⁄₄

2 9¹⁄₄ 7³⁄₄2 to

12

Fee

t*

1¹⁄₂ x 1 x 6

2 x 1¹⁄₂ x6

MOTOR DATA

FRAME P Q

56 C 12¹⁄₈ 5⁵⁄₈

143 TC - 145TC 12¹⁄₄ 5⁵⁄₈

182TC - 184TC 15⁷⁄₁₆ 6³⁄₈

213TC - 215TC 16¹¹⁄₁₆ 6³⁄₈

* Sump Depth is in 1 Foot Increments

Series 800 Sump Pumps - 6

PUMP COMPANY

SERIES 800 Quality Design Features Assure Long, Trouble-Free Service

CONSTRUCTION:Standard• Bronze bottom line shaft bearings• Bronze intermediate bearings (pump built for pit depths over 6'-0'')• Semi-open impeller with balancing ring and wiping vanes• High thrust, angular contact ball bearing• Grease lubricated pump and line shaft bearings• 416 stainless steel shaft• Round, square or oval cover plates• External impeller adjustment• Pump setting increments of 1'-0" for pit depths up to 26'-0"• Flanged discharge on all casings• Standard C face motors

Options• Stainless steel fitted, All stainless steel, Alloy 20, Hastelloy construction• Various line shaft bearing designs• 316 stainless steel shafting• Cover plate with manhole, vent or special openings• Vapor-proof construction• Various float switch enclosures• Various liquid level controls• High water alarm• Alarm bells and horns• 316 stainless steel float rod• 316 stainless steel float• Below plate discharge "T"• Special pump lengths

Heavy Duty Sump Pumps

Series 800 Sump Pumps - 7

WIDE RANGE OF APPLICATIONS:

• Industrial Process• Pollution Control• Sump Drainage• Flood Control• Hazardous, Toxic & Inflammable Liquids• Clear Liquids• Condensate• Corrosive Liquids• Acids

CAPABILITIES:• Capacities to 3000 GPM• Heads to 230 Feet TDH• Temperature to 350˚ F• Pit Depths to 26 Feet• Construction: Cast Iron, 316 Stainless Steel Fitted, All 316 Stainless Steel, Alloy 20, Hastelloy, CD4MCuSeries 800 Duplex

Series 800 Simplex

800

Series 800 Sump Pumps - 8

PUMP COMPANY1. Motor SupportAssures positive alignment of motor and pump shaft withregister fit. Normal thrust, vertical NEMA C face motorstandard

2. Flexible Coupling3. External Impeller AdjustmentHigh performance maintained without dismantling pump

4. Thrust BearingHigh thrust angular contact bearing. Moisture-proof enclo-sure, (2) grease seals, purge-type grease lubrication5. Gas Tight Column ClosureLip seal, grease lubricated

6. Cover PlateDesigned for specific unit. Optional sizes and gas-tightconstruction available

7. Column PipeSchedule 40 steel with welded flanges8. Positive Machined FitsMachined registered fits of column, bearing housing andcasing9. Intermediate Bearing AssemblyOptional designs for special applications. Furnished asstandard on pumps built for pit depths greater than 6'-0"

10. ShaftingAccurately machined 416 stainless steel, 1 1/4",11/2" or 2" diameter to assure minimum deflection11. Pump Bearing AssemblyHeavy construction designed for maximum bearing load-ings. Optional designs available12. BearingsVarious materials available to suit most applications13. Choker RingRestricts entrance of abrasives and solids into bottombearing

14. ImpellerSemi-open design with balancing ring & wiping vanes forwide range of industrial applications, secured to shaft withtaper fit by woodruff key, castellated nut, washer and cotterpin15. CasingFlanged suction and discharge all sizes. Double volutedesign on all 4X3X10 and larger sizes

16. Suction Strainer304 stainless steel

17. Discharge Pipe1"-2 1/2" threaded, 3" and larger flanged. Below plate "T"-type discharge available

Standard Line Shaft Bearing Assemblies

Superior Features

Lower Bearing AssemblyThe standard pump bearing assembly consists ofchoker ring and (2) guide bearing bushingscompatible with the liquid. Standard bronzebearings furnished with grease lubrication.Optional: carbon graphite, rubber, Teflon*

Intermediate Bearing AssemblyThe standard intermediate assembly consists of (2)guide bearings compatible with the liquid and isstandard when pit depth exceeds 6 feet. Standardbronze bearings furnished with grease lubrication.Optional: carbon graphite, rubber, Teflon*

*E.I DuPont registered ™

PUMP COMPANY

Series 800 Sump Pumps - 9

800

Part Description Standard Fitted 316 Stainless Fitted All 316 Stainless All Alloy 20

Motor Support, Cast Iron Cast Iron Cast Iron Cast IronThrust Bearing Class 30 Class 30 Class 30 Class 30Housing

Shaft Stainless Steel AISI-416 Stainless Steel AISI-316 Stainless Steel AISI-316 Alloy 20

Column Steel ASTM-A53 Steel ASTM-A53 Stainless Steel AISI-316 Alloy 20

Bearing Housing Cast Iron Class 30 Cast Iron Class 30 Stainless Steel AISI-316 Alloy 20

Guide Bearings Bronze SAE 660 Bronze SAE 660 Graphite Graphite

Casing Adaptor Cast Iron Class 30 Cast Iron Class 30 Stainless Steel AISI-316 Alloy 20

Impeller Cast Iron Class 30 Stainless Steel AISI-316 Stainless Steel AISI-316 Alloy 20

Impeller Trim Stainless Steel AISI-316 Stainless Steel AISI-316 Stainless Steel AISI-316 Alloy 20

Casing Cast Iron Class 30 Cast Iron Class 30 Stainless Steel AISI-316 Alloy 20

Gasket Vellumoid Vellumoid NA 700 NA 700

Strainer Plate Cast Iron Class 30 Cast Iron Class 30 Stainless Steel AISI-316 Alloy 20

Strainer Basket Stainless Steel AISI-304 Stainless Steel AISI-304 Stainless Steel AISI-316 Alloy 20

Discharge Elbow Cast Iron AISI-B164 Cast Iron AISI-B164 Stainless Steel AISI-316 Alloy 20

Discharge Pipe Steel ASTM-A53 Steel ASTM-A53 Stainless Steel AISI-316 Alloy 20

Cover Plate Steel HRS Steel HRS Steel HRS Steel HRS

Bearing Adaptor Steel AISI-12L14 Steel AISI-12L14 Steel AISI-12L14 Steel AISI-12L14

Adjusting Nut Steel ASTM-307 Steel ASTM-307 Steel ASTM-307 Steel ASTM-307

Lip Seal Nitrile Nitrile Nitrile Nitrile

*E.I DuPont registered TM

Alternate Line Shaft Bearing Assemblies

Materials of Construction 800 Series

Abrasive Service - 1Includes (2) guide bear-ing bushings compat-ible with the liquid, (5)rings of packing springloaded and a chokerring to eliminate abra-sives from the bearingarea. Optional arebronze or carbongraphite.

Abrasive Service - 2Includes (2) cutless rub-ber bearing bushingssuitable for water flushconnection.

Chemical ServiceIncludes (1) Teflon* bear-ing w/stainless steel lock-ing screws and lubricatedby liquid being pumped.Other bearing materialsavailable for special

chemical services.

NOTE: Bearing assemblies shown are typical formost pumping services. Unusual or severe servicesmay necessitate changes in asssembly design.

Series 800 Sump Pumps - 10

PUMP COMPANY

Curve RV-1525

Series 800Size 3 X 2 1/2 X 7RPM 1750Max Sphere 1

Series 800Size 3 X 2 1/2 X 7RPM 1150Max Sphere 1

Curve PV-1525

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

PUMP COMPANY

Series 800 Sump Pumps - 11

800

Curve BS-1610

Series 800Size 1 1/2 X 1 X 8RPM 1750Max Sphere 1/4

Curve AS-1610

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Series 800Size 1 1/2 X 1 X 8RPM 1150Max Sphere 1/4

Performance Curves

Series 800 Sump Pumps - 12

PUMP COMPANY

Series 800Size 1 1/2 X 1 1/4 X 8RPM 1750Max Sphere 5/16

Curve AS-1612

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

Series 800Size 1 1/2 X 1 1/4 X 8RPM 1150Max Sphere 5/16

0

Head

In F

eet

Gallons Per Minute

1520

25

303540

45

50

556065

70

75

10 3020 40 50 60 70 80 90

0 NPSH

Fee

t

1020

8"

7 1/8"

6 7/8"

50%

55%

58%

58%

55%

1 1/2 BHP

1 BHP3/4 BHPNPSH

Curve BS-1612

Head

In F

eet

Gallons Per Minute

0

0

10

15

20

25

30

35

10 706050403020

NPSH

0

20

10

NPSH

Fee

t

50%

55%

58%

58% 55%

1/4 BHP

1/3 BHP

1/2 BHP

8"

7 1/4"

6 7/8"

PUMP COMPANY

Series 800 Sump Pumps - 13

800

Curve CS-1615 Series 800Size 2 X 1 1/2 X 8RPM 1150Max Sphere 7/16

Curve BS-1615

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Series 800Size 2 X 1 1/2 X 8RPM 1750Max Sphere 7/16

Performance Curves

Series 800 Sump Pumps - 14

PUMP COMPANY

Curve DS-1620

Series 800Size 3 X 2 X 8RPM 1750Max Sphere 11/16

Series 800Size 3 X 2 X 8RPM 1150Max Sphere 11/16

Curve CS-1620

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

PUMP COMPANY

Series 800 Sump Pumps - 15

800

Curve DS-1630

Series 800Size 4 X 3 X 8RPM 1750Max Sphere 1 3/16

Curve CS-1630

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Series 800Size 4 X 3 X 8RPM 1150Max Sphere 1 3/16

Performance Curves

Series 800 Sump Pumps - 16

PUMP COMPANY

Series 800Size 5 X 4 X 8RPM 1750Max Sphere 15/16

Series 800Size 5 X 4 X 8RPM 1150Max Sphere 15/16

Curve ES-1640

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Curve DS-1640

Performance Curves

PUMP COMPANY

Series 800 Sump Pumps - 17

800

Curve TM-1915

Series 800Size 2 X 1 1/2 X 10RPM 1750Max Sphere 7/16

Series 800Size 2 X 1 1/2 X 10RPM 1150Max Sphere 7/16

Curve SM-1915

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

Series 800 Sump Pumps - 18

PUMP COMPANY

Curve KM-1720

Series 800Size 3 X 2 X 10RPM 1750Max Sphere 11/16

Series 800Size 3 X 2 X 10RPM 1150Max Sphere 11/16

Curve JM-1720

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

PUMP COMPANY

Series 800 Sump Pumps - 19

800

Curve SM-1730

Series 800Size 4 X 3 X 10RPM 1750Max Sphere 1 3/16

Series 800Size 4 X 3 X 10RPM 1150Max Sphere 1 3/16

Curve RM-1730

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

Series 800 Sump Pumps - 20

PUMP COMPANY

Curve UM-1740

Series 800Size 5 X 4 X 10RPM 1750Max Sphere 1 1/2

Series 800Size 5 X 4 X 10RPM 1150Max Sphere 1 1/2

Curve TM-1740

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

PUMP COMPANY

Series 800 Sump Pumps - 21

800

Curve VM-1750

Series 800Size 6 X 5 X 10RPM 1750Max Sphere 1

Series 800Size 6 X 5 X 10RPM 1150Max Sphere 1

Curve UM-1750

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

Series 800 Sump Pumps - 22

PUMP COMPANY

Curve SM-1850

Series 800Size 6 X 5 X 10ARPM 1750Max Sphere 1 1/2

Series 800Size 6 X 5 X 10ARPM 1150Max Sphere 1 1/2

Curve SM-1750

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

PUMP COMPANY

Series 800 Sump Pumps - 23

800

Curve UM-1760

Series 800Size 6 X 6 X 10RPM 1750Max Sphere 1 1/8

Series 800Size 6 X 6 X 10RPM 1150Max Sphere 1 1/8

Curve TM-1760

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

Series 800 Sump Pumps - 24

PUMP COMPANY

Curve LM-1860

Series 800Size 6 X 6 X 10ARPM 1750Max Sphere 1 9/16

Series 800Size 6 X 6 X 10ARPM 1150Max Sphere 1 9/16

Curve LM-1760

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

PUMP COMPANY

Series 800 Sump Pumps - 25

800

Curve LL-1915

Series 800Size 2 X 1 1/2 X 12RPM 1750Max Sphere 7/16

Series 800Size 2 X 1 1/2 X 12RPM 1150Max Sphere 7/16

Curve KL-1915

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

Series 800 Sump Pumps - 26

PUMP COMPANY

Series 800Size 3 X 2 X 12RPM 1750Max Sphere 3/4

Series 800Size 3 X 2 X 12RPM 1150Max Sphere 3/4

Head

In F

eet

Head

In F

eet

Curve KL-1916

Curve LL-1916

Gallons Per Minute

50

75

100

125

150

175

50 100

Gallons Per Minute

150 200 250 300 350 400

10 BHP

0 NPSH

Fee

t

8

24

16

60%

55%

60%

20 BHP

15 BHP

NSPH 5 BHP7 1/2 BHP

9"

10"

11"

12"

300100 150 200 25050

60

20

30

40

50

70

80

NPSH

Fee

t

4

12

8

0

NPSH

12"

11"

10"

9"

5 BHP

3 BHP

2 BHP

55%

58%

60%

60%58%

55%

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

50%

55%30

%

40%

30%

40%

50%

PUMP COMPANY

Series 800 Sump Pumps - 27

800

Head

In F

eet

200 300 400 600500 700

0

Head

In F

eet

20

40

60

80

100

120

140

160

NPSH

9"

10"

11"

01020

NPSH

Fee

t

Curve KL-1917

55%

60%65%

67%

70%

70%

30

15 BHP20 BHP

25 BHP30 BHP

0

100

Gallons Per Minute

200 300 400 500 600

10

20

30

40

50

60

70

Series 800Size 4 X 3 X 12RPM 1750Max Sphere 1 1/4

0

302010

NPSH

Fee

t

NPSH

12"

11"

10"

9"

Series 800Size 4 X 3 X 12RPM 1150Max Sphere 1 1/4

55%60%

65%68%

5 BHP

7 1/2 BHP

10 BHP

10 BHP

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

50%

50%

55%

60%

65%

67%12"

Curve LL-1917Gallons Per Minute

40%

50%

55%

60%

65%

68%

Series 800 Sump Pumps - 28

PUMP COMPANY

Curve 64126

Series 800Size 6 X 4 X 12RPM 1750Max Sphere 1 1/2

Series 800Size 6 X 4 X 12RPM 1150Max Sphere 1 1/2

Curve 64124

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

PUMP COMPANY

Series 800 Sump Pumps - 29

800

Curve 6412A6

Series 800Size 6 X 4 X 12ARPM 1750Max Sphere 1 1/8

Series 800Size 6 X 4 X 12ARPM 1150Max Sphere 1 1/8

Curve 6412A4

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

Series 800 Sump Pumps - 30

PUMP COMPANY

Curve 66126

Series 800Size 6 X 6 X 12RPM 1750Max Sphere 1 1/2

Series 800Size 6 X 6 X 12RPM 1150Max Sphere 1 1/2

Curve 66124

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

PUMP COMPANY

Series 800 Sump Pumps - 31

800

Curve 88126

Series 800Size 8 X 8 X 12RPM 1750Max Sphere 1 1/2

Series 800Size 8 X 8 X12RPM 1150Max Sphere 1 1/2

Curve 88124

Performance at Casing Discharge Flange

Curves Show Performance with Liquid Having Specific Gravity 1.0 Viscosity • 30 SSU

CUSTOMER ____________________________________________________ CUSTOMER NO. __________PROJECT _______________________________________________________________________________ENGINEER ______________________________________________________________________________CONTRACTOR ___________________________________________________________________________CONDITIONS:______GPM_________TDH_________HP__________EFF%__________IMP. DIA _________

Performance Curves

Series 800 Sump Pumps - 32

PUMP COMPANY

Not for construction unless certified, some dimensions may vary ± 1/2". Pump Construction:_____________________________________________________

PAGE 800-S-1Date: Nov. 1, 1981

CUSTOMER__________________________________________CUSTOMER NO._____________________PROJECT____________________________________________SERIAL NO.________________________ENGINEER___________________________________________LOCATION_________________________CONTRACTOR__________________________________________________________________________PUMP Model Size Curve No. GPM Head SP. GR.@Temp. Pump Length PlateDATA ______ _________ ___________ _____ _____ _________________ ___________ ______MOTOR Mfgr. HP RPM Volt-Phase-Cycle Frame ENC. Furnished by Mounted byDATA ___________ _____ ______ __________________ _____ _____ ____________ ______________Shop Order_____________________Certified by_____________________Date______________________

Dimensions

SIZE MODEL A B C D E F G H J K L M N

3x2¹⁄₂x7 820-S 24 28 13 26 4 5¹⁄₂ 2⁷⁄₈ 4¹⁄₄ ³⁄₈

1¹⁄₂x1x8 820-S 24 28 13 26 4 5³⁄₈ 4¹⁄₈ 4¹⁄₄ ³⁄₈

1¹⁄₂x1¹⁄₄x8 820-S 24 28 13 26 4 5³⁄₈ 3¹⁄₈ 4¹⁄₄ ³⁄₈

2x1¹⁄₂x8 820-S 24 28 13 26 4 5³⁄₈ 3³⁄₄ 4¹⁄₄ ³⁄₈

3x2x8 820-S 24 28 13 26 4 5⁵⁄₈ 3³⁄₈ 4¹⁄₄ ³⁄₈

4x3x8 820-S 24 28 13 26 4 6 1¹⁄₂ ³⁄₈

5x4x8 820-S 30 34 16 32 4 7 1¹⁄₈ 6⁵⁄₈ ³⁄₈

2x1¹⁄₂x10 820-S 34 28 13 26 4 6¹⁄₂ 5 4¹⁄₄ ³⁄₈

3x2x10 820-S 24 28 13 26 4 6⁵⁄₈ 5 4¹⁄₄ ³⁄₈

4x3x10 820-S 30 34 16 32 4 7 2³⁄₄ 6⁵⁄₈ ³⁄₈

5x4x10 824-S 30 34 16 32 4 7³⁄₈ 1¹⁄₈ 6⁵⁄₈ ³⁄₈

824-S 36 40 19 38 4 8 1¹⁄₈ 6¹⁄₄ ¹⁄₂

824-S 36 40 19 38 4 9¹⁄₂ ⁷⁄₈ 7¹⁄₄ ¹⁄₂

2x1¹⁄₂x12 824-S 24 28 13 26 4 7³⁄₈ 2¹⁄₈ 4¹⁄₄ ³⁄₈

3x2x12 824-S 36 40 19 38 4 8 2 6 ¹⁄₂

4x3x12 824-S 36 40 19 38 4 8 1³⁄₈ 6 ¹⁄₂

2¹⁄₂

31

1¹⁄₂

13¹⁄₂

14¹⁄₄

10⁵⁄₈

11¹⁄₈

11⁵⁄₈

129⁵⁄₈

9⁷⁄₈

(2)

2' T

O 2

6' IN

1' IN

CR

EM

EN

TS

FRAME P Q

56 C 10⁷⁄₁₆ 12

143 TC 10 12

145 TC 10⁷⁄₁₆ 12

182 - 184 TC 13¹⁄₂ 12

213 TC 15¹⁄₂ 12

215 TC 17 12

254 TC 20¹⁄₈ 12

256 TC 21⁷⁄₈ 12

284 TC 22³⁄₈ 13

286 TC 23⁷⁄₈ 13

324 TC 24³⁄₄ 13¹⁄₂

326 TC 26¹⁄₈ 13¹⁄₂

364 TC 26¹⁄₂ 16⁵⁄₈

365 TC 27¹⁄₂ 16⁵⁄₈

“K” dimension shown isfor a pump built for a 2'through 6' pit depth.For each additionalcolumn section,subtract 3/8" from “K.”

MOTOR DATA

1¹⁄₂

22

2¹⁄₂

3445

1¹⁄₂

22

2¹⁄₂

34455668

1¹⁄₂

22334

11³⁄₈

1212⁵⁄₈

13³⁄₈

15⁵⁄₈

16⁵⁄₈

17¹⁄₈

17³⁄₈

12¹⁄₂

1313³⁄₄

14¹⁄₂

17¹⁄₈

1819¹⁄₈

20³⁄₈

20⁷⁄₈

21⁷⁄₈

22¹⁄₂

25

12⁷⁄₈

13¹⁄₂

15³⁄₄

17¹⁄₄

1819

1010³⁄₈

11¹⁄₈

11¹⁄₂

13³⁄₈

13⁷⁄₈

14¹⁄₂

15

11¹⁄₄

11¹⁄₂

12³⁄₈

12⁵⁄₈

14⁷⁄₈

15¹⁄₄

16¹⁄₂

1717¹⁄₂

18

18¹⁄₂

19⁵⁄₈

11⁵⁄₈

1214¹⁄₄

1515³⁄₄

16¹⁄₄

6x5x106x5x10A

6x6x106x6x10A

1¹⁄₂

211³⁄₈

1210

10³⁄₈

800-S Simplex Sump Pump PUMP DATA

4¹⁄₄

5¹⁄₄

PUMP COMPANY

Series 800 Sump Pumps - 33

800

800-S Duplex Sump Pump

Not for construction unless certified, some dimensions may vary ± 1/2". Pump Construction:_____________________________________________________

PAGE 800-S-2Date: March 1, 1982

CUSTOMER__________________________________________CUSTOMER NO._____________________PROJECT____________________________________________SERIAL NO.________________________ENGINEER___________________________________________LOCATION_________________________CONTRACTOR__________________________________________________________________________PUMP Model Size Curve No. GPM Head SP. GR.@Temp. Pump Length PlateDATA ______ _________ ___________ _____ _____ _________________ ___________ ______MOTOR Mfgr. HP RPM Volt-Phase-Cycle Frame ENC. Furnished by Mounted byDATA ___________ _____ ______ __________________ _____ _____ ____________ ______________Shop Order_____________________Certified by_____________________Date______________________

Dimensions

FRAME P Q

MOTOR DATA

56 C 10⁷⁄₁₆ 12

143 TC 10 12

145 TC 10⁷⁄₁₆ 12

182 - 184 TC 13¹⁄₂ 12

213 TC 15¹⁄₂ 12

215 TC 17 12

254 TC 20¹⁄₈ 12

FRAME P Q

256 TC 21⁷⁄₈ 12

284 TC 22³⁄₈ 13

286 TC 23⁷⁄₈ 13

324 TC 24³⁄₄ 13¹⁄₂

326 TC 26¹⁄₈ 13¹⁄₂

364 TC 26¹⁄₂ 16⁵⁄₈

365 TC 27¹⁄₂ 16⁵⁄₈

(1) 4" diameter in iron, 3 1/2" in 316 stainless steel

“K” dimension shown is for a pump built for a 2' through 6' pit depth.For each additional column section, subtract 3/8" from “K.”

SIZE MODEL A B C D F G H J K L M N

3x2¹⁄₂x7 820-S 48 54 51 4 5¹⁄₂ 2⁷⁄₈ 8³⁄₄ 10¹⁄₂

1¹⁄₂x1x8 820-S 48 54 51 4 5³⁄₈ 4¹⁄₈ 8³⁄₄ 10¹⁄₂

1¹⁄₂x1¹⁄₄x8 820-S 48 54 51 4 5³⁄₈ 3¹⁄₂ 8³⁄₄ 10¹⁄₂

2x1¹⁄₂x8 820-S 48 54 51 4 5³⁄₈ 3³⁄₄ 8³⁄₄ 10¹⁄₂

3x2x8 820-S 48 54 51 4 5⁵⁄₈ 3³⁄₈ 8³⁄₄ 10¹⁄₂

4x3x8 820-S 48 54 51 4 6 1¹⁄₂ 10¹⁄₂

5x4x8 820-S 54 60 57 4 7 1¹⁄₈ 8¹⁄₂ 11

2x1¹⁄₂x10 820-S 48 54 51 4 6¹⁄₂ 5 8³⁄₄ 10¹⁄₂

3x2x10 820-S 48 54 51 4 6⁵⁄₈ 5 8³⁄₄ 10¹⁄₂

4x3x10 820-S 54 60 57 4 6⁷⁄₈ 2³⁄₄ 11¹⁄₂ 11

5x4x10 824-S 54 60 57 4 7³⁄₈ 1¹⁄₈ 13 11

824-S 60 66 63 4 8 1¹⁄₈ 13 12¹⁄₈

824-S 60 66 63 4 9¹⁄₂ ⁷⁄₈ 12¹⁄₂12¹⁄₈

2x1¹⁄₂x12 824-S 48 54 51 4 7³⁄₈ 2¹⁄₈ 8¹⁄₄ 10¹⁄₂

3x2x12 824-S 54 60 57 4 8 2¹⁄₂ 12 11

4x3x12 824-S 54 60 57 4 8 2¹⁄₂ 12 11

2¹⁄₂

31

1¹⁄₂

2' T

O 2

0' IN

1' IN

CR

EM

EN

TS

(2)

13¹⁄₂

14¹⁄₈

10¹⁄₂

11¹⁄₈

11⁵⁄₈

129⁵⁄₈

9⁷⁄₈

PUMP DATA

22¹⁄₂

3445

1¹⁄₂

22

2¹⁄₂

34

12⁵⁄₈

13³⁄₈

15⁵⁄₈

16⁵⁄₈

17¹⁄₈

18³⁄₈

12¹⁄₂

1313⁷⁄₈

14¹⁄₂

1718

11¹⁄₈

11¹⁄₂

13³⁄₈

13⁷⁄₈

14¹⁄₂

15

11¹⁄₄

11¹⁄₂

12³⁄₈

12⁵⁄₈

14⁷⁄₈

15¹⁄₄

8³⁄₄

9³⁄₄

1¹⁄₂

211³⁄₈

1210

10³⁄₈

1¹⁄₂

211³⁄₈

1210

10³⁄₈

45

19¹⁄₄

20³⁄₈

16¹⁄₂

17

6x5x106x5x10A

6x6x106x6x10A

5668

1¹⁄₂

2

20⁷⁄₈

21⁷⁄₈

22¹⁄₂

25

12⁷⁄₈

13¹⁄₂

17¹⁄₂

18

18¹⁄₂

19⁵⁄₈

11⁵⁄₈

12

2334

15³⁄₄

17¹⁄₄

1819

14¹⁄₄

1515³⁄₄

16¹⁄₄

Series 800 Sump Pumps - 34

PUMP COMPANY

Not for construction unless certified, some dimensions may vary ± 1/2". Pump Construction:_____________________________________________________

CUSTOMER__________________________________________CUSTOMER NO._____________________PROJECT____________________________________________SERIAL NO.________________________ENGINEER___________________________________________LOCATION_________________________CONTRACTOR__________________________________________________________________________PUMP Model Size Curve No. GPM Head SP. GR.@Temp. Pump Length PlateDATA ______ _________ ___________ _____ _____ _________________ ___________ ______MOTOR Mfgr. HP RPM Volt-Phase-Cycle Frame ENC. Furnished by Mounted byDATA ___________ _____ ______ __________________ _____ _____ ____________ ______________Shop Order_____________________Certified by_____________________Date______________________

PAGE 800-S-3Date: June 20, 1983

800-S Basic Sump Pump

Dimensions

SIZE MODEL A B C D E F G H J K L M N

3x2¹⁄₂x7 820-S 18 26 8 4 4 5¹⁄₂ 2⁷⁄₈ 4³⁄₄ ³⁄₈

1¹⁄₂x1x8 820-S 18 26 8 4 4 5³⁄₈ 4¹⁄₈ 4³⁄₄ ³⁄₈

1¹⁄₂x1¹⁄₄x8 820-S 18 26 8 4 4 5³⁄₈ 3¹⁄₂ 4³⁄₄ ³⁄₈

2x1¹⁄₂x8 820-S 18 26 8 4 4 5³⁄₈ 3³⁄₄ 4³⁄₄ ³⁄₈

3x2x8 820-S 18 26 8 4 4 5⁵⁄₈ 3³⁄₈ 4³⁄₄ ³⁄₈

4x3x8 820-S 18 26 8 4 4 6 1¹⁄₂ ³⁄₈

5x4x8 820-S 21 30 9¹⁄₂ 4¹⁄₂ 4 7 1¹⁄₈ 6¹⁄₂ ³⁄₈

2x1¹⁄₂x10 820-S 18 26 8 4 4 6¹⁄₂ 5 4³⁄₄ ³⁄₈

3x2x10 820-S 18 26 8 4 4 6⁵⁄₈ 5 4³⁄₄ ³⁄₈

4x3x10 820-S 21 30 9¹⁄₂ 4¹⁄₂ 4 7 2³⁄₄ 6¹⁄₂ ³⁄₈

5x4x10 824-S 24 34 9¹⁄₂ 6¹⁄₂ 4 7³⁄₈ 1¹⁄₈ 7 ¹⁄₂

824-S 21 34 9¹⁄₂ 6¹⁄₂ 4 8 1¹⁄₈ 7 ¹⁄₂

824-S 24 39 11 7¹⁄₂ 4 9¹⁄₂ ⁷⁄₈ 8 ¹⁄₂

2x1¹⁄₂x12 824-S 20 26 9 3 4 7³⁄₈ 2¹⁄₈ 4¹⁄₄ ³⁄₈

3x2x12 824-S 21 34 9¹⁄₂ 6¹⁄₂ 4 8 2 6 ¹⁄₂

4x3x12 824-S 21 34 9¹⁄₂ 6¹⁄₂ 4 8 1³⁄₈ 6 ¹⁄₂

2¹⁄₂

31

1¹⁄₂

13¹⁄₂

14¹⁄₂

10⁵⁄₈

11¹⁄₈

11⁵⁄₈

129⁵⁄₈

9⁷⁄₈

(2)

2' T

O 2

0' IN

1' IN

CR

EM

EN

TS

PUMP DATA

FRAME P Q

56 C 10⁷⁄₁₆ 12

143 TC 10 12

145 TC 10⁷⁄₁₆ 12

182 - 184 TC 13¹⁄₂ 12

213 TC 15¹⁄₂ 12

215 TC 17 12

254 TC 20¹⁄₈ 12

FRAME P Q

256 TC 21⁷⁄₈ 12

284 TC 22³⁄₈ 13

286 TC 23⁷⁄₈ 13

324 TC 24³⁄₄ 13¹⁄₂

326 TC 26¹⁄₈ 13¹⁄₂

364 TC 26¹⁄₂ 16⁵⁄₈

365 TC 27¹⁄₂ 16⁵⁄₈

MOTOR DATA

1¹⁄₂

22

2¹⁄₂

3445

1¹⁄₂

22

2¹⁄₂

34

11³⁄₈

1212⁵⁄₈

13³⁄₈

15⁵⁄₈

16⁵⁄₈

17¹⁄₈

17³⁄₈

12¹⁄₂

1313³⁄₄

14¹⁄₂

17¹⁄₈

18

1010³⁄₈

11¹⁄₈

11¹⁄₂

13³⁄₈

13⁷⁄₈

14¹⁄₂

15

11¹⁄₄

11¹⁄₂

12³⁄₈

12⁵⁄₈

14⁷⁄₈

15¹⁄₄

4³⁄₄

5³⁄₄

1¹⁄₂

211³⁄₈

1210

10³⁄₈

45

6x5x106x5x10A

6x6x106x6x10A

5668

1¹⁄₂

2

19¹⁄₄

20³⁄₈

20⁷⁄₈

21⁷⁄₈

22¹⁄₂

25

12⁷⁄₈

13¹⁄₂

16¹⁄₂

17

17¹⁄₂

18

18¹⁄₂

19⁵⁄₈

11⁵⁄₈

12

34

1819

15³⁄₄

16¹⁄₄

23

15³⁄₄

17¹⁄₄

14¹⁄₄

15

“K” dimension shown is for a pump built for a 2' through 6' pitdepth. For each additional column section, subtract 3/8" from “K.”

PUMP COMPANY

Series 800 Sump Pumps - 35

800

Not for construction unless certified, some dimensions may vary ± 1/2". Pump Construction:_____________________________________________________

PAGE 800-S-4Date: July 18, 1983

CUSTOMER__________________________________________CUSTOMER NO._____________________PROJECT____________________________________________SERIAL NO.________________________ENGINEER___________________________________________LOCATION_________________________CONTRACTOR__________________________________________________________________________PUMP Model Size Curve No. GPM Head SP. GR.@Temp. Pump Length PlateDATA ______ _________ ___________ _____ _____ _________________ ___________ ______MOTOR Mfgr. HP RPM Volt-Phase-Cycle Frame ENC. Furnished by Mounted byDATA ___________ _____ ______ __________________ _____ _____ ____________ ______________Shop Order_____________________Certified by_____________________Date______________________

Dimensions

832 Simplex Sump Pump

SIZE MDL A B D E F G H J L M N

6x4x12 832 36 40 19 38 6 9 6¹⁄₈ ¹⁄₂

6x6x12 832 6 9¹⁄₂ 7¹⁄₈ ¹⁄₂

8x8x12 832 40 54 26 52 6 12¹⁄₂ 8¹⁄₂ ¹⁄₂

456688

10

19³⁄₄ 1720⁷⁄₈ 17¹⁄₂

22 18

3640

4054

1926

3852

22³⁄₄ 18³⁄₄

25¹⁄₄ 19⁷⁄₈

28³⁄₈ 2330⁷⁄₈ 24¹⁄₈

PUMP DATA

FRAME P Q

56 C 12¹⁄₈ 12

143 - 145 TC 12¹⁄₄ 12

182 - 184 TC 15⁷⁄₁₆ 12

213 - 215 TC 16¹¹⁄₁₆ 14¹⁄₄

254 - 256 TC 20 14¹⁄₄

284 - 286 TC 20¹⁄₈ 14⁵⁄₈

324 - 326 TSC 25 16⁵⁄₈

364 - 365 TSC 25¹⁄₄ 16⁵⁄₈

404 - 405 TSC 28 18³⁄₈

MOTOR DATA

Series 800 Sump Pumps - 36

PUMP COMPANY

Notes PUMP COMPANY

PUMP COMPANY7807 Redsky DriveCincinnati, Ohio 45249

e-mail: sales@vertiflopump.comWorld Wide Web: http://www.vertiflopump.com

513-530-0888FAX 513-530-0893

Established in 1979, VERTIFLO PUMP COMPANYspecializes in the design and manufacture ofindustrial-quality pumps. The new, modern manu-facturing plant, located on over 3 acres of property,is dedicated solely to pump manufacturing.