Presented By
NAME –PURUSHOTTAM KUMAR SAH
YEAR-4TH
R.NO-11EJAME075
JAIPUR INSTITUE OF ENGINEERING AND TECHNOLOGY,KUKAS
DEPARTMENT OF MECHANICAL ENGINEERINGA
PRACTICAL TRANING PRESENTATION
ON
BHARAT WAGON & ENGINEERING COMPANY LIMITED, MUZAFFARPUR
Submitted to :- Mr. Sulabh Nalwaya Lecturer Of ME Department
INTRODUCTION
IT’S A GOVT. INDIA ENTERPRISES.
THIS COMPANY WAS STARTED BY ENGLISH MAN IN 1870.
IT WAS ALWAYS MANUFACTURES AND SUPPLIERS- SUGAR
MACHINERIES, AGRICULTURE IMPLEMENTS AND OTHER
MECHANICAL AND STRUCTURAL JOBS.
BWEL HAVING THREE UNIT ACROSS INDIA – MOKAMA,
MUZAFFARPUR AND HOWRAH
LIST OF SHOPS PERSENT IN THIS FACTORY
PRESS & SMITHY SHOP
CUTTING & WELDING SHOP
TEMPLATE SHOP
DRILLING SHOP
MACHINE SHOP
STUCTURAL SHOP
MAINTENANCE SHOP
WAGON ASSEMBLY SHOP
FINISHING SHOP
PRODUCTS
WAGONS FOR INDIAN RAILWAY
RAILWAY’S WAGON FOR DEFENCE SECTORS
C.I. WAGON COMPONENT
STEEL TANK FOR FUEL STATION
INDIAN RAILWAYS WAGONSIndian railways are the principle mode of transport of goods & raw material.
FREIGHT WAGONSIndian railway earns about 70% of its revenues from freight traffic. Most of its profits come from transporting freight and this makes up for losses on passenger traffic.
PRESS AND SMITHY SHOP
IN THE PRESS & SMITHY SHOP THERE ARE 7 SMALL
OPEN HEARTH FURNACES.
THE FURNANCE ARE CONNECTED WITH BLOWER.
IN THIS SHOP MANY COMPONENTS ARE MANUFACTURED
AS- HEAD STOCK PRESSING ANCHOR PLATE PRESSING &
ANCHOR SUPPORT PLATE PRESSING.
MACHINE USED IN THIS SHOP ARE- HYDRAULIC PRESS,
PRESS MACHINE & POWER HAMMER
HYDRAULIC PRESS The hydraulic
press is used to manufacture U shape anchor plate.
for this plate is heated in the oil furnace
CUTTING AND WELDING SHOP
THIS IS ONE OF THE SHOP IN WHICH THE BASIC WORK IS
PERFORMED
THIS SHOP IS MAINLY INVOLVE IN CUTTING THE PLATE OF
DIFFERENT THICKNESS IN THE DESIRE SHAP & SIZE AND
IN THE PROFILE CUTTING
THEY ARE WELDED CROSS BAR ,SIDE BODY AND OTHER
MISCELLANEOUS PARTS ARE MANUFACTURING IN THE SHOP
CROPPING MACHINE This machine is also
called cropping shearing machine.
This machine can cut flats plate of small size, angle plates, square hollow rod & circular hollow rod.
CHIPPING MACHINEThis machine is used to produce an inclined shape at the end of plate which is necessary in the end to end welding.
TEMPLATE SHOP
THIS IS A PATTERN A TIME MASS SCALE.
THIS SAVES A LOT OF TIME AS NO MARKING NECESSARY
WHEN USING TEMPLATE.
CREEP ANGLE AND TOP ANGLE ARE MANUFACTURING IN
THIS SHOP.
THE TEMPLATE ARE USUALLY MADE OF MILD STEEL
IN THIS SHOP NEED GREATEST ACCURACY.
DRILLING SHOP In this shop
drilling is done by two method , i.e by MARKING & JIG.
For mass production of component jig is used for drilling.
MACHINE SHOPMachine shop is the biggest shop of any organization.
In this shop various types of machine are used.
STRUCTURAL SHOP
THIS SHOP IS ALSO CALLED AS SUB ASSEMBLY SHOP.
IN THIS SHOP ONLY CENTURE SILL IS MANUFACTURE.
CENTURE SILL IS MIDLE PART OF WAGON .
IN THE MANUFACTURING OF WAGON THE CENTURE SILL
IS USED IN THREE PARTS WHICH ARE WELDED AND MAKE
IN SINGLE LONG PLATE.
THE COMPLETE BOX IS KEPT ON WHEELS ASSEMBLY AND
THEN IT IS SENT FOR FINISHING
WAGON ASSEMBLY SHOP
IN THIS SHOP THE VARIOUS COMPONENT WHICH ARE
MANUFACTRED IN THE DIFFERENT SHOP ARE ASSEMBLED
AND THE WAGON IS COMPLETED AND THEN SENT TO THE
FINISHING SHOP
THE COMPONENT IS ASSEMBLED IN THE SHOP ARE- CENTRE SILL
SOLE BAR ,HEAD STOCK, CROSS BAR, BOLSTER, PIVOT,CHANNEL
BREAK,BREAK PIPE ,BREAKE CYLINDER
FINISHING SHOP
Under frame hock
Body fitting
Body manipulator welding
Door fitting on wagon
Body hook bolting
Wagon wheeling
Air brake
Painting and Marking
Final inspection & D.M
Thanks…
