PUTTING YOU IN CONTROLThe DrillAir range of compressors for LRC markets.

2

We have developed, and will continue developing, a full range of compressors known as the DrillAir range. This range of compressors is specifically developed to cover a multitude of drilling applications. The DrillAir range is built scientifically around the principals of pressure and flow. The focus of the design is the relationship between these two variables and for the compressor to find the combination which is right for the application – to improve the efficiency aspects of time spent and fuel consumed. With the DrillAir range you achieve the maximum air flow at any pressure setting.

There is no such thing as one size fits all when it comes to efficient drilling. Depending on the depth of hole and the size of the hammer the right product makes all the difference. The DrillAir range gives you the opportunity to choose a product which is right for your core business, while giving you the flexibility to adapt to changes in well depth and hammer size for any custom applications.

DrillAir improves the profitability of your drilling operations. The DrillAir products described in this brochure are supplied with a Tier II engine, developed for LRC markets. Let us find the DrillAir machine that is right for you!

DrillAir: Putting you in control

Y35

35-39 m3min15-35 bar

28-33 m3min16-30 bar

X28

23 m3min12-20 bar

H23

3

www.atlascopco.com

Y35X28DRILL TWO WELLS IN A DAY Drilling more meters per day is achievable. Two 200 meter or 250 meter wells can be finished in a single day (1).

400 500

NEVER TAKE TWO TRUCKS TO THE JOB SITE A single truck can carry both the compressor and the rig thanks to the compact 4.1 meter compressor frame.

1 1

PRESSURE CONTROL Maximum versatility is achieved thanks to DrillAir’s ability to provide users with multiple pressure and flow settings.

16-30 15-35

LOW FUEL CONSUMPTION DrillAir is all about efficiency. It’s not just about deep drilling but about cost per meter drilled.

1.7 2.2

Four reasons to invest in DrillAir

(1) Dependent on various operational parameters. Please ask your Atlas Copco representative for more details.

Liters of fuel per meter drilled

DrillAir is a comprehensive range of products

5

www.atlascopco.com

Which unit is right for you?

DTH size

Drilling depth, meters

12

11

10

9

8

7

6

5

4

30 50 100 150 200 250 300 350 400 450 500

H23 X28 Y35

Ground engineering

Geothermal and water well drilling

Deep geothermal drilling, aerated drillingWater well, ground

engineering

Foundation drilling

The Y35 is capable of covering all applications below. The X28 can also cover all applications within the H23 category. DrillAir is all about choosing the core machine for your applications to give you the best efficiency; while knowing it will work in non-core applications too!

Never take two trucks to the job site again!

7

www.atlascopco.com

Technology that makes a difference

The combination of DrillAirXpert, the Atlas Copco screw element and a Scania engine provides high efficiency for a wide range of pressure and flow settings.

Dynamic Flow Boost® gives up to 4 m3/min additional flow when flushing and during drill stem refill. It means faster flushing, faster stem refill and a shorter time to finish drilling.

Atlas Copco XPR* extends the working pressure range. It is based on patented technology and lets you set the working pressure as low as 15 bar.

XPR

A strategic engine choice to meet your needs. Guaranteed support and longevity. We chose the Scania DC16 Stage II engine for this range.

ENGINE CHOICE

* Available only for Drillair Y35.

Predictable maintenance is guaranteed

9

www.atlascopco.com

Lower maintenance and repair expenses

Maintenance and repair costs are predictable. The standard warranty covers parts within two years or 4000 hours (whichever occurs first).

2YEARS4000H

A standard warranty can be optionally extended for an additional 2 years or 4000 hours. Reducing the risk of unexpected expenses for up to 4 years or 8000 hours (whichever occurs first).

4YEARS8000H

The three layer protection coating of all bodywork minimizes repainting costs. The top layer, a 100µm powder coat creates a barrier against mechanical damage. The 100µm layer of primer protects from corrosion infiltrating under the coating. In the event of coating damage, the steel is protected by a Zincor layer.

3XLAYERS

Putting you in control

11

www.atlascopco.com

An engine that performsThe industrial engines from Scania are based on a robust design with a strength optimized cylinder block containing wet cylinder liners that can easily be exchanged. Individual cylinder heads with 4 valves per cylinder promotes simple maintenance and fuel economy.

The engine is equipped with a Scania developed Engine Management System (EMS) in order to ensure the control of all aspects related to engine performance. The injection system is based on electronically controlled unit injectors that gives low exhaust emissions with good fuel economy and a high torque. The engine can be fitted with many accessories such as air cleaners, silencers, PTOs and flywheels in order to suit a variety of installations.

We chose a Scania DC16 Stage II engine. The compressor’s residual value is largely defined by the remaining lifetime of the engine at the moment of resale. Scania is well known for its excellent performance and durability.

SCANIA

Scania engine centers and specialists are located all across the world.

12

TECHNICAL DATA

Performance Y35 X28 H23 XATS528 XAVS448

DrillAirXpert yes yes yes no no

Max. pressure bar (g) 35 30 2 12 14

Flow at max pressure m³/min 35,4 28,7 2,1 27,9 24

Flow in boost mode m³/min 39,7 32,6 25,4 N/A N/A

Fuel consumption at 100% load kg/h 84,6 67,8 46,4 44,6 44

Fuel consumption at 75% load kg/h 64,3 47,2 32,6 34 N/A

Autonomy @ 75% load h 18,5 14,8 21,4 20,5 N/A

Engine

Engine speed rpm 1200-1900 1300-200 1300-200 1300-1800 1300-1800

Engine make Scania DC 16 V8 Scania DC 13 6-in-line Scania DC 13 6-in-line Scania DC 9 5-in-line Scania DC 9 5-in-line

Emission compliance Stage II Stage II Stage II Stage II Stage II

Engine power kW 478 369 369 232 232

Capacity

Fuel tank capacity support mounted l 1200 700 700 700 700

Fuel tank capacity wagon l 750 700 700 700 700

Fuel tank capacity high speed trailer l 1200 520 520 520 520

Technical data

13

www.atlascopco.com

DIMENSIONS

Dimmensions and weight wagon Y35 X28 H23 XATS528 XAVS448

Length mm 6200 4900 4900 4900 4900

Width mm 2200 2100 2100 2100 2100

Height mm 2500 2200 2200 2200 2200

Dry weight kg 6944 6190 5676 5706 5706

Wet weight kg 7591 6751 6236 6267 6267

Dimmensions and weight support

Length mm 4100 4000 4000 4000 4000

Width mm 2200 2100 2100 2100 2100

Height mm 2500 2200 2200 2200 2200

Dry weight kg 6352 5515 5000 5031 5031

Wet weight kg 7395 6075 5560 5591 5591

14

Five reasons to upgradeWe will even trade in your old compressor!

XRVS476 X28 XRYS577 Y35

Length (without undercarraige) 4,1 m 4,1 m 4,5 m 4,1 m

Flow nominal (Flow in Dynamic flow boost mode)

27,7 (-)m3/min

28,3 (32,6)m3/min

33,9 (-)m3/min

34,5 (39)m3/min

Maximum pressure 25 bar 30 bar 35 bar 35 bar

Canopy coating 2 layers:2+100μm

3 layers: 2+100+100μm

2 layers: 2+100μm

3 layers: 2+100+100μm

Fuel consumption at 75% load

56.8 l/h@ 25 bar

53.1 l/h@ 25 bar

84.4 l/h@ 35 bar

72.3 l/h@ 35 bar

15

www.atlascopco.com

Y35

• Automatic fire suppression system

• Work zone lights

• XPR

• Remote control

• Cold start and preheater with GSM control

X28

• Preheater

• Aftercooler+w

• After separator+bypass

• Support mounted

STANDARD FEATURES

• After-cooler, water separator and bypass valve

• 500 hour service interval for the engine

• Oiltronix®

• Pressure toggle switch

• Fire extinguisher

• EU ABS tandem undercarriage

• Wagon undercarriage

• Inlet shutdown

OPTIONS

Features and options

• Easy maintenance with external access to compressor oil Level/refill and new vessel design

• Easily accessible centralized draining system and outlet ball valve

• Easy to operate with the Xc controller

EXTENDED OPTIONS

• 3 stage fuel filter system with water separator

• Spillage free frame

• Certified Integrated Spark Arrester

(1) Dependent on various operational parameters. Please ask your Atlas Copco representative for more details.

• Drill more than Arrester 700 meters with the 70l AdBlue tank(1)

Photos and illustrations contained herein might depict products with optional and/or extra components which are not included with the standard version of the product and, therefore, are not included in a purchase of such product unless the customer specifically purchases such optional/extra components. We reserve the right to change the specifications and design of products described in this literature without notice. Not all products are available in all markets.

2958

129

0 00

- v0

1 - ©

201

7 A

tlas

Cop

co P

orta

ble

Ene

rgy

All

right

s re

serv

ed.®

Atla

s C

opco

is a

regi

ster

ed tr

adem

ark

of A

tlas

Cop

co A

B

Commited to sustainable productivity

Atlas Copco’s Portable Energy division has a forward-thinking philosophy. For us, creating customer value is all about anticipating and exceeding your future needs – while never compromising our environmental principles. Looking ahead and staying ahead is the only way we can ensure we are your long term partner.

www.atlascopco.com

Portable Energy Solutions PortfolioAIR COMPRESSORS

READY TO GO• 1-5 m³/min• 7-12 bar

VERSATILITY• 5,5-22 m³/min• 7-20 bar

PRODUCTIVITY PARTNER• 19-116 m³/min• 10-345 bar

Diesel and electric options available.

Diesel and electric options available.

PORTABLE• 1,6-13,9 kVA

MOBILE• 9-1250* kVA

INDUSTRIAL• 10-1250* kVA

GENERATORS

*Multiple configurations available to produce power for any size application.DEWATERING PUMPS

ELECTRIC SUBMERSIBLE• 275-16.500 l/min

CENTRIFUGAL• 833-23300 l/min

SMALL PORTABLE• 210-2500 l/min

LIGHT TOWERS

LED METAL HALIDE

ELECTRIC