L / D Ratio

up to 36:1

PVC Granulation lineGRANULEX

Max. Output

up to 3500 kg/hr

SALIENT FEATURES

> Patented MULTIDRIVE system for elimination of the torsion effort on the command shafts and far longer useful life of transmission system

> Parallel counter rotating technology to process wide range of formulations and very easy to operate

> Longer L/D ratio to enhance melt homogenization at much higher output levels using similar size extruder and motor ratings thus lower energy consumption

> Thermo control unit to maintain screw temperature to cater to wide range of applications and better processability

> Load cell for back pressure control on thrust bearings

> Multi-stage thrust bearings - threefold increase in dynamic load - increased power available for the screw

> Special coating on screw for long life

> Online measuring of energy consumption provided in touch screen panel

> The quick clamp die head assures fast cleaning to reduce down time and to process wide range of formulations

> Dry cutting unit with axial or lateral cut which is used for all kinds of PVC compounding

> Off set blades operate at low temperature to prevent adhesion

> Efficient cooling of granules by cooling unit which includes chilled cyclone for separation of the granules from conveying air and fumes, vibration of cooling tray and variable speed cooling fans

> Pipe fittings

> Wire & Cable

> Window and door profiles

> & Toys Footwear

> Medical tubings and blood bags

> Calendering & Flooring

> Automotive, Seals & Gasket

> WPC Profiles

> Films & Sheets

> Hoses & tubes

> Masterbatch

> Recycled plastics

www.rajoobausano.com

/Rajoobausano

Head Office :

Rajoo Avenue, Survey No. 210, Plot No.1, Industrial Area,

Veraval (Shapar), Rajkot - 360 024, Gujarat - India

Phone : +91-90990 88176

Fax : +91-2827-252700,

Email : info@rajoobausano.com

Rajoo Bausano Extrusion Pvt. Ltd.

Multidrive System

Die Face Cutter

APPLICATIONS - PVC granules for

graphics@

rajoo.com

Cooling Unit