+ All Categories
Home > Education > PVC plastics

PVC plastics

Date post: 26-Jun-2015
Category:
Upload: antonio-saorin-perez-muelas
View: 380 times
Download: 2 times
Share this document with a friend
Popular Tags:
9
PVC PLASTICS Silvia Román and Paula Sánchez
Transcript
Page 1: PVC plastics

PVC PLASTICS

Silvia Román and Paula Sánchez

Page 2: PVC plastics

DESCRIPTIONIt´s a polymer derived from two natural raw materials:-Sodium chloride or common salt and oil or natural gas.

-Its original form is a white, amorphous powder & opaque.

-It is odorless, innocuous tasteless and to chemicals.

-High resistance to compression crushing

-It is very economical

Page 3: PVC plastics

DESCRIPTION

• It is light and non-flammable so it is classified as flame retardant material.

• It does not degrade or dissolve in water. • It´s recyclable. Will not rust or corrode, with long service

life. • High resistance to compression crushing • Easily picklable, acarreable and

transportable.

Page 4: PVC plastics

Is PVC plastic recyclable?

PVC is easily recyclable and recycled once has many applications. If we study history, we see that PVC recycling is as old as manufacturing.

The recycling of PVC is technologically

simple and feasible from an economic point of view, existing in Europe an important very competitive recycling industry.

Page 5: PVC plastics

History

• In 1835 Justus discovered vinyl chloride by reacting ethylene di-chloride with potassium.

• In 1915, Fritz Klatte achieved polymerize vinyl chloride.

• In 1926 production begins in Germany.• In 1953, Ziegler developed polyethylene.• In 1954 Giulio Natta polypropylene developed.• In 1959 was born in Costa Rica marketing PVC

pipes.

Page 6: PVC plastics

Specific propertiesAbout PVC resistance:Excellent resistance to dilute: concentrated

acids, alcohols, bases, aliphatic hydrocarbons and mineral oils.

Good resistance to vegetable oils and oxidizing agents.

Limited resistance to aldehydes.Poor resistance (not recommended for use)

with aldehydes, esters aromatic and halogenated hydrocarbons and ketones.

Page 7: PVC plastics

Some interesting facts about PVC properties:o Maximum Temperature: 158°F 70°Co Minimum Temperature: -13°F -25°Co Autoclavable: Noo Melting Point: 176°F 80°Co Tensile Strength: 6,500 psio Hardness: R105o UV Resistance: Goodo Clearo Rigido Specific Gravity: 1.34

Page 8: PVC plastics

UsesConstruction:1. Wire and cable insulation 2.Door frames and windows 3.Ducts and pipes 4Profiles.

Toys: 1. Dolls. 2.Balls. 3.Swimming pools for children. 4Duck Bath

Cars: 1.Boards. 2.Power Cables. 3.Air filters and oil. 4.Seats

General Uses: Shoes. 2.Credit cards. 3.Photo albums. 4.Blinds

Medicine:1.Pipes.2.Surgical gloves.3.Bags sera.4. Dialysis

Page 9: PVC plastics

Recommended