+ All Categories
Home > Documents > PXLS-7930 Pro-XL Sports PerformanceTuffStuff Fitness Equipment Inc. 13971 Norton Avenue, Chino CA...

PXLS-7930 Pro-XL Sports PerformanceTuffStuff Fitness Equipment Inc. 13971 Norton Avenue, Chino CA...

Date post: 11-Aug-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
1
TuffStuff Fitness Equipment Inc. 13971 Norton Avenue, Chino CA 91710, USA PH: 9096291600 FX: 9096294967 [email protected] www.tuffstuffitness.com ©2012 TuffStuff Fitness Power Rack PXLS-7930 PRODUCT SPECIFICATIONS Specifications: 3”x 3” 7-guage (3/16” and 1/8” wall thickness) Tubular steel construction. Proprietary 8-step electrostatically applied powder coat finish, oven baked to insure durability. Non-pinch, J-hook design, 1” solid steel bar catches for strength and safety. Deep penetrating electrically welded high strength frames. 3/8” and 1/2” grade 5 & 8 frame bolts used for optimum strength and durability. Non-removable integrated J-hook bar catches and safety rails limit liability and loss. 3/4” spring loaded Lever lock™ pull pins on safety rails load rated at over 15,000 lbs. Unique modular design allows interchangeability of components. Swing Lock™ Bar Catches and Lever Lock™ Safety Rails adjust in 3” increments to accommodate users of all size. 3/4” solid steel Swing Lock™ pull pins on Bar Catches rated at 56,000 PSI shear load. Fat Bar upper frame connectors doubles as additional pull up station. Integrated weight horns provide ample room to store weight plates of all sizes. Storage hooks, suspension loops and Power Band Pegs offered as standard features. All frames designed to anchor to floor. Platforms & Insets available for all models. 2” thick platforms comprised of three layer design for maximum strength and available with 3/4” solid oak hardwood or rubber centers. Warranty: TEN (10) YEARS: Structural main frames, welds, cams and weight plates. FIVE (5) YEARS: Pivot bearings, pulleys, bushings, guide rods and gas shocks. ONE (1) YEAR: Belts, linear bearings and pull-pin components, and all other parts not mentioned. SIX (6) MONTHS: Upholstery, cables, finish and rubber grips. NOTICE: TuffStuff continually engages in research related to product improvement. As a result, the product received by the customer may differ slightly from its published description. Improvements in materials, production techniques and design refinements may at any time be introduced into our products. TuffStuff reserves the right to make changes in its product without notice. Ht: 97in/246 cm SH Wt: 720 lb/326 kg Pro-XL Sports Performance Rack Systems & Platforms 75 in/191 cm 65in/165cm
Transcript
Page 1: PXLS-7930 Pro-XL Sports PerformanceTuffStuff Fitness Equipment Inc. 13971 Norton Avenue, Chino CA 91710, USA PH: 909‐629‐1600 FX: 909‐629‐4967 info@tuffstuff.net ©2012 TuffStuff

TuffStuff Fitness Equipment Inc. 

13971 Norton Avenue, Chino CA 91710, USA 

PH: 909‐629‐1600  FX: 909‐629‐4967 

[email protected]  www.tuffstuffitness.com 

©2012 TuffStuff Fitness 

 

Power Rack PXLS-7930

PRODUCT SPECIFICATIONS

Specifications:

3”x 3” 7-guage (3/16” and 1/8” wall thickness) Tubular steel construction.

Proprietary 8-step electrostatically applied powder coat finish, oven baked to insure durability.

Non-pinch, J-hook design, 1” solid steel bar catches for strength and safety.

Deep penetrating electrically welded high strength frames.

3/8” and 1/2” grade 5 & 8 frame bolts used for optimum strength and durability.

Non-removable integrated J-hook bar catches and safety rails limit liability and loss.

3/4” spring loaded Lever lock™ pull pins on safety rails load rated at over 15,000 lbs.

Unique modular design allows interchangeability of components.

Swing Lock™ Bar Catches and Lever Lock™ Safety Rails adjust in 3” increments to accommodate users of all size.

3/4” solid steel Swing Lock™ pull pins on Bar Catches rated at 56,000 PSI shear load.

Fat Bar upper frame connectors doubles as additional pull up station.

Integrated weight horns provide ample room to store weight plates of all sizes.

Storage hooks, suspension loops and Power Band Pegs offered as standard features.

All frames designed to anchor to floor.

Platforms & Insets available for all models.

2” thick platforms comprised of three layer design for maximum strength and available with 3/4” solid oak hardwood or rubber centers.

Warranty: TEN (10) YEARS:

Structural main frames, welds, cams and weight plates.

FIVE (5) YEARS: Pivot bearings, pulleys, bushings, guide rods and gas shocks.

ONE (1) YEAR: Belts, linear bearings and pull-pin components, and all other parts not mentioned.

SIX (6) MONTHS: Upholstery, cables, finish and rubber grips.

NOTICE: TuffStuff continually engages in research related to product improvement. As a result, the product received by the customer may differ slightly from its published description. Improvements in materials, production techniques and design refinements may at any time be introduced into our products. TuffStuff reserves the right to make changes in its product without notice.

Ht: 97in/246 cm SH Wt: 720 lb/326 kg

Pro-XL Sports Performance

Rack Systems & Platforms

75 in

/191

cm

65in/165cm

erin
Typewritten Text
Available at Ironcompany.com®
Recommended