Q- Lon Rolled in Gasket (RIG)

Rolled-in GasketProduct

• Features

• U.V. Stable

• Unique gasket design to

Duraflex

• Low operating forces

• Memory recovery, 90%

• Exceptional performance over large temp. range ie: -20ºc to 70ºc

• Increases acoustic sound

• Benefits

• Will not discolour in direct

sunlight

• Differentiates from normal

gaskets

• Reduces wear and tear, ease

of operation.

• Retains original shape year after year and therefore gives greater seal.

• Will not freeze to mating face

• Increases acoustic sound properties of product, upto35%.

• Gasket leaves no rigid sprueafter welding

• Gasket can be hand inserted

• The gasket sight -lines of a

Duraflex window stays the same

• Mirrors sight-line of beads

• Minimises noise levels from outside environment

• Eliminates glass breakage's and provides internal and

external seal right into corners

• Can replace damaged gasket with like for like. Major advantage over any co-ex

system

• Major benefit over post co-ex

systems where large black gasket lines are currently

visible and unsightly

• Gives perfect alignment

through glass.

Page 1

Rolled-in Gasket

Sales

• Features

• Conforms to BS7412, 2002.

• BBA approved.

• Hidden gasket line.

• Lifetime guarantee.

• Meets European and World

standards.

• Benefits

• Proven product.

• Proven product.

• No unsightly black lines

• Backed by supplier.

• Proven product.

• Easily replaced if damaged.

• Been used for over 30 years in doors and windows.

• Minimal closing force.

• Vast temp. range -20�c to 70�c

• Prevents costly remarks.

• Proven track record.

• Ease of operation.

• Suits all weather conditions

and does not freeze to mating parts.

Page 2

Rolled-in Gasket

Fabricator

• Benefits

• Maintains perfect seal.

• Reduced labour costs.

• Increase production levels.

• No gaps at joints through gasket shrinkage or poor insertion techniques.

• Prevents waste and cost.

• Features

• No shrinkage once cut.

• No gasket to insert.

• Frees up shopfloor space.

• Consistent compression at

joints.

• Eliminates gasket offcutslaying around on shopfloor.

• Safer working environment.

• Frees up valuable space.

• Only one gasket required.

• Greater return on sales.

• Will eliminate shopfloorsgetting slippery through siliconised gaskets.

• Reduces stock holding.

• Common gasket for both

static and dynamic seals.

• Increased throughput

without increasing overheads.

Page 3

Rolled-in Gasket

Installation

• Features

• Fitters will not have to insert

gasket.

• Consistent glazing

compression.

• Easy to replace damaged

product on site.

• Replacement gasket

identical to original.

• Benefits

• Speeds up installation.

• Speeds up glazing.

• Prevents costly remarks.

• Customer sees no difference if damaged

• One gasket for everything.

• Cleaner gasket to handle if damaged product has to be

replaced.

(Non siliconized).

difference if damaged product has to be replaced.

• Reduces stock holding.

• Less messy on site no worries regarding skin

allergies.

Page 4

Rolled-in GasketRolled-in vs Co-Ex

• Features of Rolled in Gasket

• Can be replaced with same

product if damaged.

• Secure location.

• Consistent gasket shape.

• Easier to recycle.

• Negatives of Post Co-Ex

• Difficult to remove damaged

seal and replace with same.

• Poor co-ex adhesion leads

to costly claims.

• Post co-extruded gasket shape can be difficult to maintain.

• Contaminates re-grind.

• Easier to control external

weld sprue.

• Internal corners more forgiving when glazing.

• Dynamic seal low compression forces.

• Aesthetics (concealed gasket within frame).

• External corners can be extremely rigid, and prevent continuity of seal around frame.

• Difficult to eliminate hard sprue with out destroying

seal.

• Stiff and un-forgiving.

• Large black gasket lines visible around edge of sashes

Page 5

Rolled-in GasketTechnical

• Features• Cutting

• Easy to cut.

• Rolled-In.

• Std cutting operations.

• Std blades for PVCu.

• Dedicated Weld Blocks

• Adjustable pressure.

• Reduced weld sprue.

• Gasket inserts.

• Welding

• Butt & sash welds.

• Benefits

• No tearing.

• Does not pull out.

• No saw setting issues.

• No additional costs.

• Reduces weld sprue.

• Gives better finish.

• Provides restriction and prevents weld sprue effecting gasket compression.

• Dedicated blocks.• Butt & sash welds.

• Frames, Transom & Mullions.

• Drainage Prep

• Re-position existing cutter.

• Cleaning

• No Gasket drills.

• Reduced cycle times.

• Nibbing machine.

• Nibbing machine.

• Gasket

• Rigid foot.

• No shrinkage.

• Colour

• Black

• Dedicated blocks.

• Standard tooling.

• Prevents tearing of gasket.

• Reduced costs.

• Increased capacity, upto 17%.

• Consistency of seal.

• Guarantees no glass breakage's.

• Secure location.

• Maintains good seal.

• Matches all profile finishes.

Page 6

Rolled-in GasketSpec Guide

Page 7

Rolled-in GasketSpec Guide

Page 8

Rolled-in GasketGuarentee

Page 9