QlikView 11 Build 11271 SR1 Release Notes

QlikView 11 SR1 Release Notes

Page 1 of 37

General Comments This document covers QlikView build 11.00.11271,Service Release 1. The release contains components of

QlikView Desktop, QlikView OCX, QlikView Server, QlikView Publisher, QlikView web parts for Microsoft

SharePoint(R), QlikView Workbench and all clients except clients for mobile devices.

QlikView Server Small Business Edition users must re-LEF (activate license) their servers in order to use the

collaboration features of QlikView 11.

Environment compatibility

The Operating System required for QlikView Desktop is Windows XP SP3 or newer. The Operating System

required for QlikView Server is Windows 2003 or newer, with .NET framework 4.0 installed. QlikView 11 is

the last release of QlikView Server and QlikView Publisher that will support 32-bit operating systems.

Cross-release compatibility

It is not possible to have multiple versions of QlikView Desktop installed, i.e. the QlikView 11 Desktop

installer will overwrite a QlikView 10 Desktop installation. However, the QlikView 11 Desktop executable file

can be copied to any location on the hard drive and run from there without conflicting with the installed

QlikView version. In order to run multiple versions of QlikView Desktop on a single machine, please follow

this procedure:

a) Uninstall prior version

b) Install QlikView Desktop v11

c) Copy the QV.exe file to a new, safe location

d) Uninstall QlikView Desktop v11

e) Install prior version

Following this procedure, you end up with a working version 11 QV.exe, but the operating system treats the

prior version as your primary version of QlikView.

QlikView 11 has a file format compatible with versions 9 and 10.

There are no known issues using a QlikView 11 Server with an earlier installed Plug-in client (9.00 and later),

although QlikView 11 Server features will not be recognized by the client.

The QlikView Plug-In client is automatically installed with QlikView Desktop. If the version of either client is

changed, it is recommended to do an uninstall of the previous version before installing another version. If

any of the installations become unstable, they can be corrected by repairing the affected installation.

QlikView 9 Workbench and QlikView 9 Webparts are not compatible with QlikView 11.

Installation programs

The QlikView Server installation program installs QlikView Server and QlikView Publisher.

The QlikView Desktop installation program installs QlikView Desktop, QlikView OCX and QlikView Plug-in for

Microsoft Internet Explorer by default. To install the Plug-in only, run the QlikView Desktop installation using


Page 2 of 37

the custom setup option and selecting QlikView OCX only. A separate installation program for QlikView Plug-

in for Microsoft Internet Explorer is included in the QlikView Server install.

A 64-bit version of the QlikView Plug-In is included in the 64-bit QlikView Desktop installation program.

Follow the procedure above to install the 64-bit Plug-in. There is not a separate install program for the 64-bit

Plug-in.

QlikView Documentation and Tutorial, QlikView Web Parts for Microsoft SharePoint(R) and QlikView

Workbench are delivered in separate installation programs.

Support material

The new features in QlikView 11 are documented in the PDF reference manual and in the help files that can

be found in the separate installation packages. The PDF reference manuals in the installation packages are

English only.


Page 3 of 37

Known issues The following issues were identified at release time. The list is not comprehensive; it does however list all

known major issues. The ambition is to have the issues fixed in coming versions.

Clients, Presentation, Layout & Charts

• The Subversion wrapper has problem with parsing different language code pages.

• A document with input fields will create a .shared file when it is opened on an Accesspoint. Due to

underlying data structures the .shared file will grow with an average of 50-80 bytes/input field value

when the input field value is changed.

• Making selections in the legend of a chart is not always possible. The issue occurs when users click

and paint an area over the values in a legend. If any part of the selection area covers the text in the

legend, no selection will occur and QlikView may produce an ‘unhandled exception error’. If the

selection area covers only colors in the legend, the selection will occur as expected. This issue occurs

in all version 11 clients.

• Macros will not function in WebView.

• QlikView 9 (Desktop and Server) cannot open documents that contain the new QlikView 11 actions.

• Bookmarks created in the AJAX client revert to the default name when saved. Bookmarks retain their

given name when saved in the other clients.

• When upgrading from a prior version to QlikView 11, the internet cache should be cleared before

the new AJAX property dialogs can be used.

• Pressing the ‘Help’ button in the AJAX client invokes help but not context sensitive help.

• The QlikView 11 Release Candidate does not upgrade previous version 11 installations. Any prior

version of QlikView 11 must be uninstalled prior to installing the QlikView 11 Release Candidate.

• When using QlikView Help in Firefox (AJAX), the browser window will resize (reduce in size or

minimize).

• When both x86 and x64 versions of QlikView Desktop are installed on a single machine an

uninstallation of either will leave some files on the hard drive. These files can be manually removed.

• When using the AJAX client in IE, list boxes with many (>50,000) items will display a white box

instead of the values when scrolling / paging though the list.

• The alignment options for Multi-Line captions do not work in the AJAX client in IE7.

• Nested grid containers will expand beyond the outer container when first created in the AJAX client.

Pressing F5 or resizing the outer container will fix the problem.

• The ‘Select Report’ dropdown is active in the AJAX client even if the QlikView Server does not allow

printing. The users will not be able to print even though it appears they can.

• QlikView 11 can open QlikView 10 project files (XML). If there was a container object in the original

QlikView 10 file, it will be lost when opening the project files in QlikView 11. This will corrupt the

new QlikView 11 file and the entire container will need to be reconstructed. The work around is to

open the QlikView 10 file in QlikView 11 and recreate the project files.

• Creating multi-column list boxes in AJAX is not working correctly. The slider to change the number of

columns is not working. However, the user can type a number into the box next to the slider to

change the number of columns.

• QlikView will render graphical charts with multiple dimensions and multiple expressions (a combo

chart with two dimensions and three expressions, for example) though the chart will not provide

much value. Currently, QlikView will produce an ‘drawing failed internally error’ when trying to

render graphical (not straight and pivot tables) charts with these characteristics.

• If a user selects multiple objects on a sheet and resizes the objects, QlikView will only save the

changes to the object used for resizing. The changes will not be saved for the other objects that

were selected.


Page 4 of 37

Documentation & Localization

• QMC Webhelp is now available in Japanese. To replace English Webhelp with Japanese Webhelp,

please rename the two folders (QMCHelp and QMCHelp_JPN) which you typically find under

C:\Program Files\QlikView\Management Service. Change “QMCHelp” to “QMCHelp_Old” or

“QMCHelp_eng” (or delete the folder if you do not need English help). Change “QMCHelp_JPN” to

“QMCHelp” – the Japanese help files will now be accessed when you click the Help icon in the top

corner. A PC that has displayed the English help files needs to empty its web cache to ensure the

Japanese files are loaded. Any QlikView services running need to be stopped before making the

changes and started again after the change was made.

• English documentation for QlikView Desktop is included in this release. Other languages must be

downloaded from the QlikView website.

• It is possible to have the Help language different from the QlikView Desktop interface. This can be

changed on the General tab of User Preferences.

QlikView Server, QlikView Publisher and Management Console

• When using Script parameters in a reload task without a loop and distribute, only one reload will be

executed, i.e. only the first parameter value will be used. The possible workarounds are either to add

a loop and distribute to e.g. a scrap folder, or to create one task for each value.

• Network Storage Devices other than Microsoft Windows based shares are known to cause system

instability and are not currently supported.

• Running an older version (before v11) of QlikView Server after having a v11 QlikView Server installed

and running will disable the existing anonymous account. In order to run the older version of

QlikView Server, the anonymous account must be enabled BEFORE starting the older QlikView

Server.

• The suggested filename when downloading from the AccessPoint may have non Western European

characters replaced by underscores in browsers that do not support UTF-8 headers.

• If QlikView Server isn’t allowed to disable the anonymous account it will still try every time it starts.

• It is possible to enter more text in document description than will be visible in the Access Point

QlikView Workbench

• In some situations it may not be possible to edit the properties of an Extension Object created with

the Extension Wizard.

• Some of the extension examples use direct links to /QvAjaxZfc/ instead of relative links. This will

cause these examples to fail in Workbench (and Web Parts). To make them work

LoadExtensionScripts LoadCSS should be used. E.g:

Qva.LoadScript("/QvAjaxZfc/QvsViewClient.aspx?public=only&name=Extensions/QlikView/

Examples/geoHeat/raphael.js", geoHeat_Example_Done);

changed to:

Qv.LoadExtensionScripts(["Extensions/QlikView/Examples/geoHeat/raphael.js"],

geoHeat_Example_Done);

and:

Qva.LoadCSS("/QvAjaxZfc/QvsViewClient.aspx?public=only&name=Extensions/QlikView/Exa

mples/org/main.css");

changed to:


Page 5 of 37

Qva.LoadCSS(Qva.Remote + (Qva.Remote.indexOf('?') >= 0 ? '&' : '?') + 'public=only'

+ '&name=' + "Extensions/QlikView/Examples/piechartlabel/style.css");


Page 6 of 37

Comments on product features The following features are conscious design decisions and most of them are not likely to change in coming

Service Releases.

Server Installation

• It is not possible to install the QlikView 10 (and later) Server on a domain controller.

Clients, Presentation, Layout & Charts

• Some changes have been implemented to AJAX contextual menus and the top menu ribbon: menu

icons have been unified and all icons have been restyled/colored to create a consistent layout.If data

with over 2,147,483,647 unique values is loaded, QV does not load correctly. Also, after

2,147,483,647, the value turns negative as the data is displayed in record number in a statistic box.

• Dimension limits should not be used in tables that contain mini-charts. This will cause an out of

memory error.

• The security settings of Internet Explorer may prevent users from exporting data or sending data to

Excel when using the plug-in client. The workaround is to add the QlikView server to the trusted sites

list or modify the security settings under Internet Options to allow launching of external

applications.

• AJAX for Small Devices mode is not compatible with Private Browsing in iOS5. In order to have the

full functionality of the client you must turn off Private Browsing in Safari.

• On systems using UAC (Windows user access control), WebView may require that QlikView is started

using the “Run as Administrator” option.

• If a link to a QlikView 9 Server document has been saved as a browser favorite, the link will not work.

It must be re-created using a QlikView 11 Server.

• Color gradients and semi-transparent colors do not display correctly in the AJAX client when MS

Internet Explorer is used. It works correctly in other browsers.

• The QlikView Java client does not work with a QlikView 11Server. The QlikView protocol for Java

clients is no longer available.

• Mobile clients prior to Version 10do not work with a QlikView 10 (or later) Server.

• The AJAX client will ignore all scroll bar settings except widths.

• The AJAX client does not allow users to change scroll bar settings.

• OnActivate and OnDeactivate Sheet Object Event triggers have been removed from QlikView 11.

• The Activate and ActivateAll API methods no longer work since the OnActivate and OnDeactivate

object triggers have been removed.

• The new, scrollable tab row is not available in Internet Explorer 8 and lower or in older versions of

other browsers. In older browsers, the original tab row will be used.

• Beacons are not displayed in the new (scrollable) tab row.

• The vertical label setting on Pivot and Straight tables has no affect in AJAX.

• Prior to QlikView 11 some graphical charts that allow an 'others' segment. When these charts are

opened in QlikView 11, the X-axis presentation limit and the label are moved to the proper places on

the Dimension Limits tab. This is not the case with straight tables. The label will be moved to the

Dimension Limits tab but the Max Number of Rows value will remain as it was.

• There is no ‘undo’ functionality on Notes and Comments. If a Note is deleted, it is permanently

removed. If an object with Notes is deleted, all of the Notes and Comments for that object will be

permanently deleted even though it is possible to undo the deletion of the object.


Page 7 of 37

• Graphical charts with ‘Max Visible Number’ set in version 10 and older will have this setting migrated

to the new Dimension Limits tab in the property dialog. The new settings will be to ‘Show Only’ using

the ‘Largest’ values

• The default significant digits have gone from 8 to 14. This only affects list boxes and expressions that

have not been reformatted from Expression Default.

• The Menu option and Dialog box for interacting with Server objects have been removed. The View |

Show Server Objects menu commands should be used to interact with server objects.

• Suppress Zeros not being done in Pie and Funnel charts. Zero values were previously suppressed in

the front end for expressions in these two charts. With the addition of Dimension Limits, QlikView

will no longer suppress zero values for expressions across all chart types. This will affect charts that

have only expressions and no dimensions. Zero values caused by dimensions will still be suppressed

as before when the option is enabled.

• Scrollbars in AJAX do not respect changes in the settings. This is because we have changed the way

scrollbars are rendered in AJAX.

• There is no way to choose/upload an image for Backgrounds or Dynamic Backgrounds in the AJAX

client.

Script, ETL and Expressions

• The script parser no longer accepts incomplete quotes (or brackets) around file names.

• The default color scheme for script and expression syntax has been changed.

• On 64-bit systems, 64 and 32-bit QlikView loads both 64 and 32-bit custom connectors. QlikView

first looks for 64-bit connectors in the current QV.exe location and then in “Program Files/Common

Files/QlikTech/Custom Data”. Further, QlikView looks for 32-bit connectors in the current QV.exe

location and then in “Program Files (x86)/Common Files/QlikTech/Custom Data”. If several

connectors with the same file name are found only the first one is included into the connector list.

• The macro script debugger is no longer in QlikView. The product is no longer supported by

Microsoft.

Documentation & Localization

• WebView help is not completely context-sensitive like the rest of the help. The help will react to the

currently selected object but not the properties within the object. The help can be opened from the

Help menu or from within the regular QlikView help.

• QlikView documentation is no longer stored in C:\Program Files\QlikView. Documentation is now

stored in C:\ProgramData\QlikTech\QlikView Documentation.

QlikView Server, QlikView Publisher and Management Consoles

• QlikView desktop client cannot lease a license from QlikView Server when the server is running in

DMS security mode and Custom directory is the only directory resource configured.

• “Due to a limitation associated with using Microsoft’s COM objects we recommend that you limit

the number of QlikView Engines (QlikView Enterprise Management Console>> Setup>> Distribution

Services>> Advanced tab) to a maximum of 9 or the number of processor cores available on the

host server, whichever is lower.”

• The QlikView Server services are designed to run as local administrator. Running with an account

that is not local administrator is an unsupported scenario.


Page 8 of 37

• To use the QlikView Management Service (QMS) API the group “QlikView Management API” must be

created on the QMS machine and the account that uses the API must be part of that group. This will

also apply to importing tasks from another QMS. There are two exceptions to this:

o The API for starting an EDX task and

o The API for getting status on an EDX task.

• Search results may differ between two searches in a clustered Directory Services Connector (DSC)

right after a change since each DSC caches individually.

• The Management Console and Enterprise Management Console have been merged into a single tool

now called the Management Console.

• It is no longer possible to use blank password for Custom Users in the Publisher.

• Sessions are handled differently: a reconnect is automatically made if the user navigates away from

a document. This will not happen if the session is explicitly closed or when the browser is closed.

This Session Recovery can be disabled in the QlikView Management Console.

• When using session recovery (session recovery is only applicable for the AJAX client) there will be a

Server bookmark in the QlikView Management Console for each user that is using a document.

These Server Bookmarks will reappear in the QMC even if deleted because they are generated by

QlikView to handle session recovery.

• When losing the network connection - even briefly - there will be errors in the task logs and event

log.

• When using Session Collaboration, invitees have the same data access privileges as the session

initiator.

• QlikView cannot sustain the inputfields if the document is opened without data. Therefore, any

document containing inputfields will always open with data, even if flagged not to do so. When this

occurs, a line indicating this behavior will be written to the log file.

Bugs corrected A large number of bugs have been fixed. The following are the main ones pertaining to support cases: (The

description is in some cases truncated.)

ID Title

42749 Background Style Combo box have small width to show long text within it

43536 Highlight property does not reflect changes in chart

43535

Invisible property within Expression Tab is not valid/applicable for Grid/Block Chart but present

and selectable with no reflection on chart

42722 Limit Labels (Characters) does not work properly

42792 Line Orientation values "Diagonal Climbing" and "Diagonal Falling" are working the opposit way

42710

Selections within Use "Expression Total" and "Accumulate Expression" has effect in the object

even when checkbox(s) are unchecked)

43665

Send to excel and "Print", icons does not appear in caption neither in context menu (as well as

'Export' and 'Note' are missing in Context menu for objects . ( Webview )

42713

Supress Zero-Value and "Zero on Bar" are checkboxes should be radio button as are alternative of

each other.

42843 Text on Axis within Expression Tab shows Text distant from other correspoding values

43553 Text Style within "Text" tab is not working correctly.

43914 Wrong help file shown for templates

44908 (WebView/Ajax) "Allow Drag and Drop" setting does not work on Table Box Object


Page 9 of 37

42626 AccessPoint (OSX) - When Signing in the View as option is greyd out and locked

45303 AJAX - IE - Report -Report Titles get cut off in the drop down

44598 AJAX - The Current Selection box is not emptied with Clear

44683 Ajax Client "Allocated memory Exceed" issue

45498 AJAX gives Unexpected Error in QV11 (same as bug 43764)

42695 AJAX UI bug: Alignment and margins on input fields in lists

42751 AJAX UI Bug: Popups, including color picker, should be closed when clicking outside of them

44520 Ajax/Webview - Object Properties German translation of label "More" is wrong

45041 AJAX/WebView: Listbox in Container within Container Grid Style gives trouble in AJAX/WebView

44536 Ajax/WebView: Some Special Icons in objects are not shown

45819 Ajax: Toolbar Show/Hide notes does not work properly

42730 Alignment inside the Reference lines Tab is not correct

42694 Allow move column has no effect.

44570 Application created in v10 can not be opened in v11

44479 Application created in version 9 cannot be opened in version 11

44339 Apply button grayed out when using Totalsl Use Label with Straight Table

42844 Axis Position is not working correctly

42704 Background setting interface is not consistent with other object's setting.

45698 Calendar and Slider object not working properly (iPad - Small Device mode)

44518

Cannot create Bookmarks in Ajax unless in document porperties/server you have "Allow Server

Objects" checked

44336 Carriage return chr(13) not working as in previous versions

43612 Certificate: QV Settings service will not start automatically after adding certificates

43613 Certificates: QDS service will not start automatically after adding certificates

42720 Chart Major/ Minor Lables overlap with Axis Line (X-Axis)

42796 Collaboration object manage users dialog

42757 Color Picker needs two (2) clicks to respond Or need to click on Object once to show changes.

43539 Comments in the Expressions are not shown anywhere on the chart

42614 Container object: Tabs on the left and Tabs to the right are not named equally.

42591 Copy data, Copy image to clipboard, no icon is showing

44729 Custom Format Cell does not format header row

43654 Delete note is not working correctly in ipad

44588

Demension Limits>Show Others: Unable to Choose Other in Pie/Bar Chart but Able to in Straight

Table

44215

Desktop - When a Static Min value is defined for dimension in a bar chart, bars are no longer

displayed when a selection is made

45687 Dimensions dropdowns does not work for charts(FireFox)

43666 Distributions made to "All Users" distributes to both IQVS and QTSEL\Anonymous

45461

Document Bug:ServerSideExport is outdated and has been replaced by ServerSideExportEX the API

guide should be updated to reflect this

43669 Document randomly disapearing from Access Point

44423 Documentation - Qlikview Server Reference Manual are reffering to AccessPointSettings.aspx file

45393 Documentation is lacking on OpenDocumentEx

43614 Documents unavailabe when 1 QVS node goes offline

42732 Dotted Line Style for a Reference Line is not drawn correctly if Line Weight equals 1.


Page 10 of 37

42974 Drop down in tablebox may require multiple clicks to expand

43655

Dropdown menu for selection of dimension within Properties does not close with closing of

property window

44284 Dynamic update: With Insert Replace Each the replaced value are still visable

43605 Edit/Delete menu (for Cooments) does not apear in Tabs. Unable to edit and Delete comments

44358

Export/Import sheet layout no longer possible to do in version 11, but still mentioned in help/ref

manual

43911 Extensive information in Document Support Information

42647 Fast Type Change in Chart icon only shows in caption.

42716 Field "Use Expression Total" does not make any difference to chart

45488 File over 5 GB fails to reload from QMC

43912 Header error in Status > Task > Task history

44199 IE Plugin - Letter "Z" does not work in notes

43607 IE7: Some settings doubled in sheet object properties

42648

If Fast Type Change in Chart is enabled and only the same Chart type as the current chart is

choosen the Fast Type Change Icon is showing in the chart.

44350 If QlikView WebServer does not start, port 4750 cannot be changed

42852 Improperly designed scrollbar and difficult to use

42701

In case of "Single object" and Object with large tab / Caption (label) there is not name to view full

name ( no resize option)

42662

In 'Label for Total' it's possible to write a text and press enter, but the label seems to have no

effect on the object

42676 Include Total, Include Others check boxes are disabled

44306 Inputfields - while doing loop and reduce

43915 Installation: Erronous source folder (but identical files)

44385 Internet Explorer: Direct Link to document with IEPlugin does not work

45963 iPad Safari IOS5.0 Multibox MultiSelection does not Work

45104 iPad Small DeviceVersion Menu Empty with Japanese interface

44372 iPhone/iPad Multiple Selection in Multi Box Not Work

42697 JavaScript API callback not working for NewBookmark method

44534 Labels in DSPSettings Dialog get truncated

44962 License lease lost after QlikView restart when using DMS with Custom Users

42795 Line Orientation is improperly designed and overlapping with field below it.

44517 Linebreak “\n” in Text object does no longer work

42601

List Box: when you have one or two expressions active and have enabled show frequency in

percent and you have a small window, the text gets very crowded and some numbers disapears

43675 Lock icon in caption in multibox is wrong

42800 Memory initialisation should not be needed in QV memory management system

44311 Mobile Client - Unable to remove tabs

44877 Module File is Saved in .js or .vbs instead of .qvs

43633 MSI: The installation flow changes when using Config and playing with next and back

42803 Multibox: Gridstyle not working in ajax/webview

42733 Not possible to change Error Bar Color (or any of its properties)

42856

Not possible to create any "Chart" from scratch as its not possible to access or add Expressions

(IE7) for All Charts

42706 Not possible to open a Qlikview Document through a URL with a action on a Button


Page 11 of 37

44182 Note window "X" gets practically hidden with the right corner of the document in AJAX client

44966 Open URL with special characters is inconsistent.

44628 Persistent Cross-Site Scripting (XSS) via bookmark name

44814 Pivot Table: problem with header color

44057 Plugin - Replacing bookmark removes the shared premissions

42606

Properties->Presentation Not possible to change the number of columns (with checkbox 'Multiple

Columns' checked)

44681 Publisher - Read Document Log was Aborted - Warning

45711 QDS service does not start if run on a machine with American date format

43909 QDS: Failed to update notification file

44589 QlikView 11 - Conditional Dimension - Sort Not Functioning Properly

44822 QlikView Desktop - Interval not displayed in defined format beyond a certain value

44391

Qlikview Distribution Service - Batch Reload: When

reloading via qlikviewdistributionservice.exe with

command line task errors with:Error

Exception=System.NullReferenceException

: Object reference not set to an instance of

an object.

44734

QlikView Management Console - "Send test-email to" return message from Mailserver gets

truncated

44514 QlikViewServer - Temporary bookmarks not removed from .shared file

43918 QMC : SourceDoc -> AddTaskWizard -> Distribute is allways saved to first QVS in list

42849

QMC -Trigger - Weekly: Missmatch between task trigger details and actual trigger, when setting to

run more seldom than every week.

45181 QMC: Created QVD doesn't refresh automatically in the left pane

43670 QMC: Datepicker not working when IE ESC is on and if "about:blank" isn't added to trusted sites

43753

QMC: Last added/removed user to distribution list doens't get added/removed when distributing

via E-mail

43755 QMC: Layout for Document Control part in User Docs moves in IE8

43667 QMC: Strange Settings Service info on About page

43660 QMC: Task Dependencies->each retry generates individual logs with mixed Success and Failure

44266 QV 11 Tutorial with QV PE does not work as expected

44297 QV Server only : Task Reload fails if a space is in the mounted folder name

44587 QV11 Expression group shows wrong expressions no in Combo Chart

44803

QVS 11 IR QVS.exe crashes when a document is opened in AccessPoint and the user gets a

response in both AJAX and IE Plugin "Your out of session/Usage CALs...."

43908 QVS stops and does not recover, goes Off Duty

45613 Runtime Error! when clicking in a Search Object after document has been reloaded on server

45474 Russian : Russian does not work at all

45102 Server - anonymous users are treated as one user

45226

Server - Distribution - QDS hanging with Exception=System.OverflowException: Value was either

too large or too small for an Int32 error

43348 Server installation: No radiobutton preselected

43548

Show Axis Legend checkbox is inappropriate field for Block chart(with reference to desktop

version)

42822 Single object container: Long object title causes tab to become really long

43676 Sort expression in straight table not working if expression is preceded by a disabled expression

43640 Source Control operations cause QV to lose focus

44707 Straight Table: Expression shows empty result

45348 Table blank, no data visible


Page 12 of 37

43904 Tasks fail if you run the QDS service with an account that is not local administrator

45680 The "Bookmark" and "Select Report" dropdowns does not work in Ajax (Chrome)

42661

The Border Above Spacing option in the Cell Borders dialog does not seem to have any visual

effect.

45691 The dropdowns for "Bookmark" and "Select Report" does not work in Ajax (IE9)

43349 The select report dropdown is active in Ajax although the QVS does not allow printing

43350 There is no Option to switch between the dimensions when there more dimensions in Radar Chart

42663 Total Position : How to test/activate drop down menu?

42644 Total Position field is disable no way to test it

43751 Treeview list box not working in ajax

42787 Two label fields for Line/Arrow properties dialog (IE7)

43628 Unable to horizontal scroll in Ajax for small devices

45419 Unable to Make Selection by Choosing Text in Legend

42725 Unable to reload SA MGMT docs through QDS

43639 Unexpected Exception when trying to add QVW to Source Control

42669 Use Expression Total-> cog wheel: possible to make selections even if checkbox isn't selected

42564 User is not notified if a document extension is missing.

44850

V11- Enable Conditional dimension under the pivot table properties the layout would shift very

randomly

43522 webparts objects too large causing scrolls

43602 When changing objects in a grid container, they do not appear where expected

42858

'When Chart is resized vertically to some extent. It hide its Y-axis ( values ) demension behind

chart area.

42642 When trying to change 'Field' of a 'Mini chart' the selection is troublesome

42940 Word hangs if you try to work with objects from QlikView/Plugin

44725 WorkBench JavaScript div Tag" search icon can't be replaced with custom icon

44723 Workbench: QlikView WebServer via JavaScript div Tag - pops up "no connection" message

43658 working with extensions in webview crashes qv desktop


Page 13 of 37

Upgrading from previous QlikView versions

QlikView Desktop

To upgrade, previous versions of QlikView need not be uninstalled. However, the previous installation will be

overwritten and the settings from the earlier version will be used.

QlikView Server

From QlikView 9

• When upgrading from Version 9 with IIS installed the QlikView virtual folders must either be

manually deleted after un-installation or changed to point to the new foldersafter the upgrade is

done.

• If there is no Publisher license (only a QlikView Server license) and reload tasks have been set up, a

manual step is required.

1. After installation, start all QlikView services.

2. Go to the systems tab and select the QlikView Server.

3. Go to the General tab for the QlikView Server

4. Under the heading "Migrate Schedules" you will find a button to migrate the schedules.

Note that this will only appear if you have any tasks to migrate and if the Management

Service has connection to the QlikView Distribution Service.

• Uninstalling Version 9 removes all .config files; please make a backup copy of any .config files that

have been manually modified. The most common one is QlikViewDistribution Service.exe.config.

• After an upgrade, the supervision accounts needs to be added in the QMC again.

From QlikView 10

To upgrade, previous versions of QlikView need not be uninstalled. However, the previous installation

will be overwritten and the settings from the earlier version will be used.

From QlikView 11 pre-IR

It is recommended to uninstall earlier pre-release versions of QlikView 11 before installing the Initial

Release.

Version 9 Version 10 Version 11

…\Qlikview …\QlikView …\QlikView

…\QVAnalyzer …\QlikViewDesktop

…\QVAjaxZfc …\QVAjaxZfc …\QlikViewAjax

…\QVClients …\QvClients

…\QVPlugin …\QvPlugin …\QlikViewPlugin

…\QVJava


Page 14 of 37

New functionality in QlikView 11

General features

Improved Hierarchy Loads

The hierarchy loads have been redesigned. The HIERARCHY prefix executes in half the time compared to

QlikView 10. Other changes include improved scalability with very large hierarchies. There has been no

change to the syntax for hierarchy loads.

Drop-Down selection tool for tabs in the load script

A drop-down selector for the script tabs has been added to the Script Editor toolbar. This provides users with

an alternative to clicking on load script tabs to navigate through the tabs.

OEM Island

QlikView provides a new mechanism that can restrict QlikView documents tagged with an application Id

from running on any other QlikView Server without a matching Id. This feature is reserved for use only by

OEM partners.

BNF notation for Load Script tool tips

The QlikView Load Script Editor now displays BNF notation (syntax) in the tool tips.

Document Extensions

Document Extensions are Extension Objects that contain no UI. They can be used to customize the

generated AJAX pages or used as sources of data for integration purposes.

Context sensitive help for the script editor

Context sensitive help was broken in QlikView 10. It has been fixed for QlikView 11.

Alternate States

QlikView has allowed users to detach an object from the underlying data model for quite some time now.

When an object is detached that object no longer responds to user selections. The user can then re-attach

the object and it instantly updates to reflect the current state of the selections. Alternate states are similar

to this. The QlikView developer can create multiple states within a QlikView document and then apply these

states to specific objects within the document. The end-user can create copies of these objects (server

objects) and then put those objects into different states. The most important difference between detach

and alternates states is that ALL objects in a given state will respond to user selections made in that state.

Objects in a given state are not affected by user selections in the other states.


Page 15 of 37

Notes and Comments

QlikView 11 adds a new collaboration feature, Notes and Comments. This feature allows users to create and

share notes about QlikView objects. Notes are shared with other QlikView users and these others users can

respond by leaving their own comments. The users have the ability to save a snapshot (bookmark) of the

data with each Note and Comment.

Session Collaboration

QlikView 11 includes another new collaboration feature, Session Collaboration. This feature allows server

based QlikView users to share their QlikView session with other people. This is only available when

connected to a QlikView Server and using the AJAX client. The QlikView Plug-in client does not support this

feature.

Dimension Limits

QlikView has had the capability to present "Others" and "Totals" values in various chart types. QlikView also

allows users to configure charts to display the top or bottom X values in several charts. All of this

manipulation was previously managed by the charting engine. Starting with QlikView 11, these capabilities

have been moved to the calculation engine. This means users will be able to set these options across all

chart types, except for Gauge Charts and Pivot Tables. There is a new tab in the chart property dialog called

‘Dimension Limits’ that allows users to configure these options.

Conditional Enablement of Expressions and Dimensions

It is now possible to conditionally enable and disable dimensions and expressions. There are new checkboxes

and expression fields on the Dimensions and Expressions tabs in the property dialogs for use with this

feature.

Source Control Integration

QlikView 11 has the capability to integrate with Source Control systems. The feature is available when using

QlikView Desktop. There is a new menu option in the File menu that allows QlikView Developers to connect

a QlikView document to a source control system. This feature works with the XML project files that QlikView

Desktop produces and offers basic integration into third party source control systems. The source control

system must have an implementation of the MSSCCI API in order to use this feature. QlikView 11 Source

Control integration is compatible with Microsoft Team Foundation Server.

NOTE: The XML project file structure has been changed from version 10.QlikView 11 can open version 10

project files but cannot save in the earlier format. QlikView 9 and 10 cannot make use of QlikView 11

project files.

NOTE: When a QlikView document is placed into Source Control all new objects will have a nine digit

random number appended to the Object ID when created. This is to help identify and facilitate merge issues

when multiple people are working on the same QlikView document. The Object IDs can be edited and the

changes will be preserved.


Page 16 of 37

Mapping Loads

You can now perform MAPPING loads directly from a .QVD file. There is no longer a need to un-optimize the

.QVD load while performing a MAPPING load. This has been available since QlikView 10 but was not

documented.

Container Object

The container object has a new way of displaying objects, grid mode. This allows users to view and interact

with more than one object at a time within a container object. Grid Mode does not support multiple tabs in

a container object.

Actions

QlikView 11 contains six new actions.

Action Description Available Clients

Clear Field Clears a specific field All

Set State Name Changes the state of a single object All

Copy State Contents Copies the selections from one state to another state All

Swap State Contents Swaps selections between two states All

Reload Performs a reload on the current document. QlikView Desktop

Dynamic Update Performs a dynamic update to the current document. All

Metadata

Expression comments will be seen as tooltips when hovering over the header of expression columns in a

straight table.

AJAX client improvements Apart from the new layout features listed above, a number of AJAX specific features have been added:

Pivoting and Reordering in Pivot tables

The goal is to have parity between the C-client and the AJAX client. It is now possible to pivot a pivot table in

the AJAX client. For example, if a pivot table has 3 dimensions and several expressions, it is now possible to

arrange the columns in any order.

UI upgrades

A number of minor upgrades have been added to the AJAX client:

• Order by columns in list boxes

• Scrollable tab row in Internet Explorer 9, Firefox (4 and higher) and Chrome (12 and higher).

• Object scrollbars have been improved.


Page 17 of 37

Property Dialogs

The property dialogs have a new look and feel in the AJAX client. These changes were made to improve the

look and usability of the dialogs. The new dialogs are available in the AJAX client and in WebView on

QlikView Desktop.

AJAX for Small Devices

AJAX for Small Devices creates support for QlikView data exploration on small form touch devices, such as

smart phones. Existing applications may be used without redesigning, as QlikView features are used along

with built-in scrolling and zooming functionality in the small device. It is possible to show the QlikView

document in a layout that automatically redesigns objects to suit small devices, or in its original application

layout.

There is a mix to thumbnails and place holders when accessing a QlikView document. Graphical charts have

thumbnails of the actual charts. All other objects have placeholder icons. After clicking on an object, you will

be taken to the actual object, not the thumbnail nor placeholder icon.

QlikView Server

QMC Help

Context sensitive help has been added in QlikView Management Console (QMC).

LDAPs

The configurable LDAP DSP for LDAPs (LDAP via SSL) support has been added.

Audit Logging by Document

Some organizations require that a user audit log is generated, so that every query is registered and it is

possible to look at “who did what” retroactively. With QlikView Server version 10, this setting affects the

entire server and all documents are logged. QlikView Server version 11 supports the logging of individual

documents. Additionally, version 11 logs all selection values; version 10 does not display all selected values .

Enable and Disable Document Download and/or Exporting and Printing per

Document & User

In many situations the system manager will want to prevent any “hard” data coming out of the QlikView

Server. In these situations downloads of the .qvw file, printing and exporting are not allowed; only the

interactive session with the QlikView Server is permitted. This functionality is available in Version 10 at the

document level only for downloading. In Version 11 it is now possible on a per user level as well as the

capability to enable and disable Exporting and Printing on a per document and user level.


Page 18 of 37

Supporting Task for QVD creation

It is now possible to add creation of QVD files as a Supporting Task. This is NOT a replacement for creating

.qvd files using a .qvw. Please see the QMC on-line help for more details.

Distribution to Email within a QVW document

It is now possible to distribute a QVW file to the email recipients defined in a field in the document.

Alert Email to Document Administrators

It is now possible to send alert email to document administrators.

License Tracking

The use of licenses is added to the QVS Event logs. Please see the QlikView Server Reference Manual under

the What’s New Section for more details.

Distribution and reload performance

The performance of reload and distribution has been improved:

• QlikView 11 Publisher can now open source documents without data prior to executing a reload

task. There is no need to load the document data into memory and then perform a re-load of the

document.

• Loop and Reduce performance has been improved.

More details can be found in the QlikView Server Reference Manual under the What’s New Section.

Management Console UI

• UI inconsistencies have been cleaned up.

• The performance of refreshing tables all over the QMC has been improved.

• The Status page is drawn and updated faster.

• It is now possible to expand all of a task chain by right click.

• It is now possible to remove a user from all distributions where the user is explicitly targeted.

• Search and filter is added to Tasks, Source and User Documents

• Alerts within the QMC are added for service status

• Clustering and user types is made more consistent among the services

Reduction with lock fields

In previous versions of QlikView a reduction was affected by lock fields (by in effect reduce on the locked

values). In version 11 the reduction will ignore any locked field.

Improved Logging

Logging and error handling is not completely reliable and sometimes confusing. One real error could in some

cases show as three or more errors. A task that finished OK can sometimes have many warnings because the


Page 19 of 37

QVB has not responded for a few seconds. This behavior is now fixed. Also, audit logging of changes made

to the QVS and QVWS settings in now possible.

QMC and QMEC are merged into QMC

The QMC is removed and QEMC is renamed to QMC.

AccessPoint Remake

The AccessPoint has been given a new look and feel including new search capabilities. Document attributes

are also leveraged to better categorize documents. Document descriptions are now possible. Global

messaging shown on the AccessPoint is now possible by entering messages within the QMC.

EDX Enhancements

Starting an EDX will now return a session id to allow interrogation of the status of the session rather than on

the task. When the session is done the status will contain a list of all the tasks (and session id’s) that have

been triggered, allowing for continuous tracking of the status. This functionality is available through the API.

Load-Balancing Improvements

A new additional algorithm for load balancing, ”CPU with RAM Overload”, when using a Qlikview Web Server

was added to better manage a cluster of QlikView Servers. In essence, the QVWS will now be able to route

traffic based on two factors: (1) RAM and (2) CPU utilization. The reporting of memory and CPU loads on the

physical QlikView Servers has been improved.

Improved Task Retries

If a task that contains a loop fails, it will not restart at the point of failure rather than restarting the task from

the beginning of the loop.

MSI - Installation for QlikView Server

The MSI has been given a usability overhaul.

QlikView Workbench The QlikView Workbench is being updated with a number of new features:

• The QlikView Workbench now includes a wizard for building Extension Objects

• Workbench could previously only be used within an ASP.NET web site project. It is now possible to

connect to a QVW via JavaScript / div tag without the need of a .NET DLL component. The JavaScript

code can look as follows:

<scripttype="text/javascript"src="http://localhost/QvAjaxZfc/htc/QvAjax.js"></script> <scripttype="text/javascript">

var mydoc;

varMyQvObject; MySheetObjects = function(data) {


Page 20 of 37

alert(data.length);

}

MyDocuments = function(data) {

alert(data.length);

} mySearch = function() {

MyQvObject.Data.SelectTexts("3","4");

}

MyInit = function() {

mydoc=Qv.GetDocument("Films");

MyQvObject = mydoc.GetObject("LB1458");

} GetDocumentlist = function() {

Qv.GetAllDocuments(function(data) {

alert("data:" + data.length); });

}

GetObjectList = function() {

mydoc.GetAllObjects(function(data) { alert(data.length);

});

} Qv.InitWorkBench({ View: 'Films', BodyOnLoadFunctionNames: ["MyInit"],

CustomIcons: {SEARCH:"API_test/Images/NewSEARCH.bmp", CD:"API_test/Images/NewCD.bmp"}

});

</script>

A div tag can look as follows:

<divclass="QvFrame"avqview="Films"avq="object:.Document\LB1458"id="Document\LB1458"style="width:400px;height:250px;">

APIs Version 11includes updates to all APIs, including COM, QlikView Management Service and JavaScript. All new

APIs are designed with new functionality and backward compatibility in mind. In addition, QlikView will

expose a new back-end API to manage access to QlikView Server clusters and retrieve document lists. All the

APIs for version 11 will be posted on QlikCommunity.

COM API

QlikView provides new APIs for the automation of Alternate States.

QlikView Management Service API

This release contains the following updates to the QlikView Management Service API:

• Service status

• QlikView Server and QlikView Publisher license configuration and management (not CALs)

• QlikView Distribution Service settings

• User document collaboration configuration (for restricted mode)

• Opening/accessing source document data (e.g. fields and bookmarks)


Page 21 of 37

• QVS statistics

• DSC user lookup and validation

• Importing tasks/remote QMS communication

• Section Access Management

• Upload of extensions

• Enhanced EDX task control

QlikView JavaScript API

The version 11 JavaScript documentation has been updated.

Bugs corrected

ID Title

44615

QEMC - Script - QVD generation: If you store to a QVD, the user name and password are stored in clear text in the XML

portion of the QVD


42591 Copy data, Copy image to clipboard, no icon is showing

42601

List Box: when you have one or two expressions active and have enabled show frequency in percent and you have a small

window, the text gets very crowded and some numbers disapears

42606 Properties->Presentation Not possible to change the number of columns (with checkbox 'Multiple Columns' checked)

42614 Container object: Tabs on the left and Tabs to the right are not named equally.

42626 AccessPoint (OSX) - When Signing in the View as option is greyd out and locked



42647 Fast Type Change in Chart icon only shows in caption.

42648

If Fast Type Change in Chart is enabled and only the same Chart type as the current chart is choosen the Fast Type Change

Icon is showing in the chart.

42661 The Border Above Spacing option in the Cell Borders dialog does not seem to have any visual effect.

42662 In 'Label for Total' it's possible to write a text and press enter, but the label seems to have no effect on the object



42676 Include Total, Include Others check boxes are disabled


42695 AJAX UI bug: Alignment and margins on input fields in lists



Page 22 of 37

42701 In case of "Single object" and Object with large tab / Caption (label) there is not name to view full name ( no resize option)

42704 Background setting interface is not consistent with other object's setting.

42706 Not possible to open a Qlikview Document through a URL with a action on a Button

42710

Selections within Use "Expression Total" and "Accumulate Expression" has effect in the object even when checkbox(s) are

unchecked)

42713 Supress Zero-Value and "Zero on Bar" are checkboxes should be radio button as are alternative of each other.


42720 Chart Major/ Minor Lables overlap with Axis Line (X-Axis)



42730 Alignment inside the Reference lines Tab is not correct

42732 Dotted Line Style for a Reference Line is not drawn correctly if Line Weight equals 1.


42749 Background Style Combo box have small width to show long text within it



42787 Two label fields for Line/Arrow properties dialog (IE7)

42792 Line Orientation values "Diagonal Climbing" and "Diagonal Falling" are working the opposit way

42795 Line Orientation is improperly designed and overlapping with field below it.


42800 Memory initialisation should not be needed in QV memory management system

42803 Multibox: Gridstyle not working in ajax/webview


42843 Text on Axis within Expression Tab shows Text distant from other correspoding values

42844 Axis Position is not working correctly

42849

QMC -Trigger - Weekly: Missmatch between task trigger details and actual trigger, when setting to run more seldom than

every week.

42852 Improperly designed scrollbar and difficult to use

42856 Not possible to create any "Chart" from scratch as its not possible to access or add Expressions (IE7) for All Charts

42858 'When Chart is resized vertically to some extent. It hide its Y-axis ( values ) demension behind chart area.



Page 23 of 37




43350 There is no Option to switch between the dimensions when there more dimensions in Radar Chart


43535

Invisible property within Expression Tab is not valid/applicable for Grid/Block Chart but present and selectable with no

reflection on chart

43536 Highlight property does not reflect changes in chart

43539 Comments in the Expressions are not shown anywhere on the chart

43548 Show Axis Legend checkbox is inappropriate field for Block chart(with reference to desktop version)

43553 Text Style within "Text" tab is not working correctly.



43607 IE7: Some settings doubled in sheet object properties









43655 Dropdown menu for selection of dimension within Properties does not close with closing of property window



43665

Send to excel and "Print", icons does not appear in caption neither in context menu (as well as 'Export' and 'Note' are

missing in Context menu for objects . ( Webview )






Page 24 of 37



43751 Treeview list box not working in ajax

43753 QMC: Last added/removed user to distribution list doens't get added/removed when distributing via E-mail


43904 Tasks fail if you run the QDS service with an account that is not local administrator








44057 Plugin - Replacing bookmark removes the shared premissions

44182 Note window "X" gets practically hidden with the right corner of the document in AJAX client

44199 IE Plugin - Letter "Z" does not work in notes

44215

Desktop - When a Static Min value is defined for dimension in a bar chart, bars are no longer displayed when a selection is

made

44266 QV 11 Tutorial with QV PE does not work as expected

44284 Dynamic update: With Insert Replace Each the replaced value are still visable

44297 QV Server only : Task Reload fails if a space is in the mounted folder name

44306 Inputfields - while doing loop and reduce

44311 Mobile Client - Unable to remove tabs

44336 Carriage return chr(13) not working as in previous versions

44339 Apply button grayed out when using Totalsl Use Label with Straight Table

44350 If QlikView WebServer does not start, port 4750 cannot be changed

44358 Export/Import sheet layout no longer possible to do in version 11, but still mentioned in help/ref manual

44372 iPhone/iPad Multiple Selection in Multi Box Not Work

44385 Internet Explorer: Direct Link to document with IEPlugin does not work

44391

Qlikview Distribution Service - Batch Reload: When reloading via qlikviewdistributionservice.exe with command line task

errors with:Error


Page 25 of 37

44423 Documentation - Qlikview Server Reference Manual are reffering to AccessPointSettings.aspx file

44479 Application created in version 9 cannot be opened in version 11

44517 Linebreak “\n” in Text object does no longer work

44518 Cannot create Bookmarks in Ajax unless in document porperties/server you have "Allow Server Objects" checked

44520 Ajax/Webview - Object Properties German translation of label "More" is wrong

44534 Labels in DSPSettings Dialog get truncated

44536 Ajax/WebView: Some Special Icons in objects are not shown

44570 Application created in v10 can not be opened in v11

44587 QV11 Expression group shows wrong expressions no in Combo Chart

44588 Demension Limits>Show Others: Unable to Choose Other in Pie/Bar Chart but Able to in Straight Table

44589 QlikView 11 - Conditional Dimension - Sort Not Functioning Properly

44598 AJAX - The Current Selection box is not emptied with Clear

44628 Persistent Cross-Site Scripting (XSS) via bookmark name

44681 Publisher - Read Document Log was Aborted - Warning

44683 Ajax Client "Allocated memory Exceed" issue

44707 Straight Table: Expression shows empty result

44729 Custom Format Cell does not format header row

44734 QlikView Management Console - "Send test-email to" return message from Mailserver gets truncated

44803

QVS 11 IR QVS.exe crashes when a document is opened in AccessPoint and the user gets a response in both AJAX and IE

Plugin "Your out of session/Usage CALs...."

44814 Pivot Table: problem with header color

44822 QlikView Desktop - Interval not displayed in defined format beyond a certain value

44850 V11- Enable Conditional dimension under the pivot table properties the layout would shift very randomly

44877 Module File is Saved in .js or .vbs instead of .qvs

44908 (WebView/Ajax) "Allow Drag and Drop" setting does not work on Table Box Object

44962 License lease lost after QlikView restart when using DMS with Custom Users

44966 Open URL with special characters is inconsistent.

45041 AJAX/WebView: Listbox in Container within Container Grid Style gives trouble in AJAX/WebView

45102 Server - anonymous users are treated as one user

45104 iPad Small DeviceVersion Menu Empty with Japanese interface


Page 26 of 37

45181 QMC: Created QVD doesn't refresh automatically in the left pane

45226

Server - Distribution - QDS hanging with Exception=System.OverflowException: Value was either too large or too small for an

Int32 error

45303 AJAX - IE - Report -Report Titles get cut off in the drop down

45348 Table blank, no data visible

45393 Documentation is lacking on OpenDocumentEx

45419 Unable to Make Selection by Choosing Text in Legend

45461

Document Bug:ServerSideExport is outdated and has been replaced by ServerSideExportEX the API guide should be updated

to reflect this

45474 Russian : Russian does not work at all

45488 File over 5 GB fails to reload from QMC

45498 AJAX gives Unexpected Error in QV11 (same as bug 43764)

45613 Runtime Error! when clicking in a Search Object after document has been reloaded on server

45680 The "Bookmark" and "Select Report" dropdowns does not work in Ajax (Chrome)

45711 QDS service does not start if run on a machine with American date format

42922 free input of user names in QMC

44839 Include Japanese server PDF in installation build

44541 QVS German Interface language setting issues - More... button

45208 QVS German Interface language setting issues - Context menus

45212 QVS Portuguese Interface language setting issues - Context menus

40582 Extension object crashes QlikView in WebView

38217 Vertical scroll is almost imposible without large zoom level (iPad, Galaxy Tab)

39434 Changing an annotations owner via the QMC causes meta problems

40081 Difficult to scroll through pivot table (Galaxy Tab)

40440 QlikView Server - When exporting and scrolling in Pivot table QVS crashes

40529 Hovering column titles in the plugin client (or OiS)

40728 AJAX - iFrame - Search Box - Backspace - Delete -Unexpected Error Occurred

42928

Qlikview - Chart - Pivot Table: When using the Dual Function in a pivot table both the literal and numeric are being exported

in SR3

43144 Access Point: Links to unavailable document are not disabled

43169 New documents can't be created in Webview mode

43213 General script error when storing QVD


Page 27 of 37

43221 Export file naming

43256

When Bookmark created with settings i.e. " show description as a pop-up message" is accessed it show pop-up message

whenever left clicked is done by mouse.

43262 Plugin:Certain sheet objects almost disappear in container on clear/selection/resizing

43264 Setting for "Bookmark Access" within repository does not work correctly (For user define bookmark).

43266 Plugin: After minimizing a grid container a few times and then restoring it, charts may become unresponsive

43276 Upgrading XML project files from 10 - 11 unable to handle container object

43297 Close QV.exe before welcome splash screen has vanished causes windows "stopped working" error

43313

Searched list in Help-> Search [Tab] is not sorted correctly (when clicked on sort icon at "Title" heading (caption) to sort

result in ascending or decendig order.

43315 Could not refresh gracefully has increased very much

43329 Wrong association to bookmarks when you try to delete a minimized extension

43392 Property windows, Repository window, Add New Sheet Object window jumped left whenever moved (drag to new place)

43812 Touch - Cycle and Drill Down groups do not work in charts

43813 Touch - No right click option available for cycle groups

43814 Small Devices - No right click option available for cycle groups

43824 Bookmarks created on server not visible on Motorola Xoom and Vice Versa

43759 Treeview list box is difficult to exand in the Small Devices client

43405 Bookmark setting i.e. "Show in my favorites" is not de-selectable it got selected automatically. (web view)

43434 Shared reports in Ajax differ from the same report in plug-in and open-in-server

43439 I sometimes get internal inconsistncy when I run stresstests

43450 Colored spot in Edit Expression dialog

43463 Garbled characters in Chinese Customize dialog (+ Russian + Chinese)

43517 Error in QVB when loading from Excel macro-file (.xlsm)

43561 Document Reload Fails with Inputfield

43564 Gradients in unpatched IE 8 does not work.

43575 If you can't open a file in plugin due to cal limitation the accesspoint stops respnding

43595 Loading Content on Access Point on pub11.qliktech.com

43734 IE9: Unneccessary scroll bar added to session collaboration invitation dialog

43767 Documentation and tutorial is opened in different language everytime if using shortcut.

43777 AccessPoint slow when choosing categories or searching


Page 28 of 37

43788 Orientation in Printing Settings wrong when using Properties

43710 CWE-732: Incorrect Permission Assignment for Critical Resource - Case 1



43484 Extension Examples contains a direct link to QvAjaxZfc

43696 QDS : Replaceing DSC cluster will remove DSC cluster info from QDS-settings

44819 SVN: Field properties not saved

43842 Extension piecharts are not displayed in one of our Example documents

45209 QVS German Interface language setting issues - Help

45218 QVS Portuguese Interface language setting issues - Mixed german and portuguese

45220 QVS Portuguese Interface language setting issues - String overlap

44780 Unexpected exception when clicking in "Select one metric" listbox in the What's new QlikView 11.qvw

44578 French Tutorial PDF not so pretty

44538 Check that the QMC webhelp works properly after removal of chunk files from the MSI

44566 Source control-same change as server

43870 Trigger disappears when copying Supporting Tasks

43831 Multiple Columns is not working correctly for List box

43838 Possible to CLEAR locked selections - Xoom/Ipad

44542 QVS Portuguese Interface language setting issues - Broken tabs on foldout

44546 SVN: Progressbar not always visible when performing Get Project several times

44563 Problems with Portuguese interface language for iPad & Iphone

44564 Problems with German interface language for iPad & Iphone

44630 SVN: Error message window can be closed prior to closing the browser window

44679 Grid Multibox resize can cause error

45197 QVS German Interface language setting issues - Three line string

45202 QVS German Interface language setting issues - Broken tabs on foldout

45207 QVS non English Interface language setting issues - Document Info

43899 Clear All Selections from menu does not work

43900 Group resize of sheet objects is not retained upon save


Page 29 of 37

43982 Not possible to scroll a chart using touch/swipe (AJAX on iPad)

43983 It is not possible to scroll in a list in a chart in Ajax on iPad

44067 QV crash when adding a non saved document to SC and then trying to save, when document has existing objects.

44348 SVN: New document not deleted when cancel Get Project

44362 SVN: In SC still visible after Save As

41167 Add button in Select Wizard does nothing on first click

41166 Blob preview not updated properly

41165 Select wizard crashes when trying to list tables containing binary data read with Oracle ODBC 10g

44894 Remove the active thumbnails from the small devices client

43103 Desktop - Bar Chart - X-axis Legend - Not always visible

44483 QMC: Tables in UI does not show the correct information.

43079 Task status not in sync with Task history/log upon QDS crash/stop

43597 QDS : Changing supervisors will not have any affect until a task is edited+distributed or QDS is restarted


43973 Compilation of bug fixes and improvements merged from $/Ver10.00/Sandvik branch

44722 Problems connecting to a server from workbench project

44783 SVN: Variable value not saved after SC

43224 Memory leak in QVManagementService.exe

44459 QMC broken due to added jQuery dependency

44111 SVN: Password still entered after checkbox has been removed

44879 Default values for project files not correctly interpreted

44633 SVN: Data missing when reloading after SC

44097 SVN: User Name and Password not entered together with SVN Server

44069 Remove Assert in DoGetUtilizationData


43028 AccessPoint: Retrieving document list from "off duty" or "unlicensed" server

43194 Memory increasing with several MB when you open, close, and open a document.


44407 QMC: Unable to add and run two QVS servers in parallel


Page 30 of 37


43317 181 auth rows in DMS is not possible via QMS API

43416 Tasks get stuck reloading, and cannot be aborted manually

44116 Text is cut, not wrapped in QMC labels

43088

Qlikview - Migration of non-Publisher tasks from V9 to V10, Migration stops if it reaches a task that is reliant on the

completion of another task and that task is lower down in the xml file



44363 Single machine server - tasks stuck in Running state : "Task is running at other cluster member"

44389 Download Document or Print and Export to Excel does not work when set to All Authenticated in tasks




44618 SVN: No good way to abort an Add project

43372

Send to excel and "Print", icons does not appear in caption neither in context menu (as well as 'Export' and 'Note' are

missing in Context menu for objects . ( Webview )

44144 (AJAX) Loader screen for documents

44018 New cell icons

43997 Cannot single tap a bar or slice to make a selection

43758 Treeview list box is difficult to exand in the Touch client

40549 Properties->Presentation Not possible to change the number of columns (with checkbox 'Multiple Columns' checked)

44426 The status of tasks shows as failed in Task History Details while they are running

43950 Javascript error in QMC

44568 Document access is downgraded from Admin to User when opening a document created in QV9 in QV11

43887 Drawing of chart failed internally in Combo chart

44171 TriggerEDXTask with NULL password gives TaskStartResult as OtherError

44346 Not possible to add project to SC when having unicode in filename

44122 SVN: QV hangs after merging

44187 SVN: It is possible to move objects in document while merge window is open

44119 SVN: "In SC" changes to "In SC*" after performing a reload.

40393 Previously shown drop down flashes by, before the one you clicked on is shown


Page 31 of 37


44108 SVN: Progress bar needed to indicate that something is happening

43437 Sheet background image vertical alignment not properly calculated



44190 QMC : CPU affinity displays max 25 cores



41721 QvObject are not removed from VS when uninstall/repair

42263 Properties for an extensions created in QV10 does not work in QV11


43835 iPad and Ajax: Font Overlay when using the associative search

43357 Loading a text file with more than 66 millions lines using http load

43454 Web Server - CPU 100% - QlikView 10 SR3

44174 SVN: Sometimes no action in QV after merge with TurtoiseMerge

43730 QDS : Upon task distribution any changes in QVS cluster is not accounted for

42515 QMC->SourceDoc->Distiribute Manually->Mountpoint not updated

44064 Blurry text in grid objects (tables) in Chrome, Safari, iPad, iPhone

44142 (AJAX) Refine and update Autocomplete in dropdowns in Properties




43570 Zoom function destroys Edit Expression for input Box

43351 Single Object Mode for Sharepoint as a service integration.

43165 AJAX - not rendering images correctly works fine in IE Plugin

44141 (AJAX) Poor rendering in tables in Chrome.

39913 The QvaPublic.BookMark, QvaPublic.BookMgr eqivalent classes are missing in the JS API documentation

39914 The Qva.AddExtension and QvaLoadScript equvialent methods are missing in JS API documentations

39915 Qv.InitWebParts is obsolite


Page 32 of 37

44004 QMC: Not possible to set access method to Download only on task

44041 Help file generation commandline "-x file1.h file2.h file3.h" will crash when exiting

43048 QMC - Mail Server: "Email was sent" notfication message is cut off


40753

Open Document in the Reduce tab of the QEMC generates an "Object reference not set to an instance of an object" after

exactly 10 minutes

44112

Every time a distribution task without reload and with EDX trigger runs from QMS API Client an extra "All Users" will be

added under Authorization tab in User Documents

43886 QMC: Dateformat in Started/Scheduled filter is hardcoded to "yyyy-mm-dd"

44270 Reload tasks (QVS only or with Publisher) finishes with warning



44262 SVN: Change in QV window size from maximized to smaller or the other way around causes "In SC*"

44102 SVN: The Browse button is useful first when an URL has been entered, therefore it should be outgreyed until then.

40065

AccessPoint:When having 500 doc in Accesspoint and 12 items per page and all doc,. visible the listbox Items per page partly

disapears

44149 SVN: Browse for Local Destination is shown from scratch even though a path has been entered

44153 SVN: QV is not requesting password if it has not been entered in Settings

44095 SVN: Entered Repository URL is cut next time you Add a project to Source Control

43705 Remove contents of API calls ActivateAll, DeactivateAll

44195 Search object loses its focus in Ajax


43709 CWE-311: Missing Encryption of Sensitive Data - Case 3

42909 QMC: Mail Server Setup layout


43495 QMC: Orphan task issues

37092 Bug in loading with Crosstable

43370 QMC: Document Administrators not able edit Authorization for "their own" User Documents


44015 Category for any kind of task not sorted/not wad

42016 Long template names are truncated in the Select Template menu



Page 33 of 37



43868 ServerSideExportEx exported files are not in the correct format in charts

43736 Treeview list box scroll back to the top when expanding in ajax (IE9, Safari)


44076 QVS restarts under heavy load conditions due to bad formed QVPX2 request


44193 Container object jumps in ajax when making a selection


42324

QMC -Trigger - Weekly: Missmatch between task trigger details and actual trigger, when setting to run more seldom than

every week.

43377

QDS cluster environment: The first qds memory increase to 7 GB during a period of time of two days, the other seven qds's

are still on 1 Gb. Memory leak?

42261 Slider object not working properly (AJAX on iPad)

43924 QlikView OCX not issuing a runtime license

41982 Unknown error in MSXML when parsing XML data using LOAD FROM_FIELD

44079 Selecting in chart can cause a crash

42520 Gauges not rendering properly

43195 QEMC: Task triggers on success of other tasks i.e in a loop can be expaneded too many times in Status-->Task tab

43926 IE 7 and 8: Can't export file or save to Excel when running https.

43895 WebParts - Two session/usage CALs are used for each action

43871 AJAX looses connection when making search in chart with mixed dimensions and expressions

43584 AJAX: Tooltip doesn't go away

43962 Section Access Management : Cannot delete Default Table

44099 SVN: Multiple "Select SVN Folder" pop-up windows can be opened.

43922 Section Access OMIT column field value is still visible under Search Objects results

43823 View documents as list/thumbnails are both selected

43762 Personal Edition error prompt when double clicking a qvw on the Standalone server although user has a valid leased license

43976 QMC > Licenses: Cannot read confirmation or error message

43738 QMC: Last added/removed user to distribution list doens't get added/removed when distributing via E-mail

44114 SVN: Enter in comment field with several rows - OK button is clicked instead of getting to the next row


Page 34 of 37








41407

Selections within Use "Expression Total" and "Accumulate Expression" has effect in the object even when checkbox(s) are

unchecked)




43798 Inconsistency in QEMC, Management Service, Summary tab vs Help text

41531

QMC:Documents>UserDocumnts>Server>ServerObjects>Authorization---> When check and uncheck the checkbox

sometimes the Add users and groups icon disapears.


43898 Script parameters - changed behaviour on Reload only tasks

43055 QMC: Broken Help link


43225 Total differ in QV11 from QV10 (due to Dimension Limits)

43830 Update hover tooltip and loader overlay on objects

43296 Dropdown menu for selection of dimension within Properties does not close with closing of property window

43977 Sheets with conditonal show don't appear where expected

42888 Tooltip for "Help" in Ajax is displayed as "&Help"


43519

QMC: "Object reference not set to an instance of an object." when selecting a user document that has been configured to be

preloaded on a cluster node that has been removed.


42247 Incorrect Source document location cause QDS to go offline permanently.

43780 Text rendering different in version 11 compared to version 10

41085 In 'Label for Total' it's possible to write a text and press enter, but the label seems to have no effect on the object



Page 35 of 37


43801 No watermarks when using Test edition = Yes in Open in server and plugin

43800 Very small watermarks in QlikView and Ajax with Test edition = Yse license

43919 WHERE clause with '+' or '-' in a LOAD statement not working

43720 CWE-532: Information Exposure Through Log Files

43865 AJAX - Right clicking for fast change icon display error

43510 Certificates, QMS: Unable to remove a QVS node from cluster

43054 Partial reload with more than one inpufield results in "General Script Error"

43866 Rename field doesn't work when field name already exists

43925 QEMC - Group resolution with OpenLDAP doesn't work

43923 QlikView OCX Developer license should work as QlikView Desktop license as well

43921 Mixed case directory groups not resolved by Section Access NTNAME

43744 Showing Dbg button in Ajax toolbar should be possible in release mode

43292 Time Drill to go up is not working correctly

43872 I don't get any session log when I open documents on QVS

43319 Force Tunnel with QVWS using a different port does not work

40906 You are not able to create server bookmarks for yourself with SBE license

43873 QlikView - Chart - QV crashes after changing first character of typed Expression in Expression editor

43875 Not possible to click and drag scrollbar in Trellis bar chart

43874 A bar chart dimension legend with scroll list (up/down arrow) results in "drawing of chart failed internally"

40271 When running plugin in IE 7 with leased licensed you can't drag drop or copy paste objects

43867 Rename field doesn't work when field name already exists

43790 Drawing of chart failed internally in pie chart

41727 MSI upgrade doesn't detect previous x86/x64 installation

43834 Unable to make muliple selections in Table Box- Motorola Xoom and Ipad

43178 Clear all function removes wrong kind of bookmarks

43179 Clear all function does not work for User Bookmarks

43569 Impossible to change printer default settings from within Qlikview Developer

43373 Search Object: when moving the object and the mouse marker/text remains in the previous place


Page 36 of 37

37621 Security warnings when creating an extension generator project needs to be documented

43302 Ajax: Grid Container: Not possible to collapse a fully expanded pivot table

43756 Unchecked "Size to data" not working

40562 JS API documentation does not contain the new documentation structure

41550

Container allow to add other containters to it ( which might / might not have its own objects) . But no way to delete added

container.

40571 show as tree view changes the layout

40548

List Box: When setting the Number Format combobox to Interval the Format Pattern is set to "hh:mm:ss" (which is a Time,

not an Interval).

43503 No logging in QVS for connection from distribution tasks

43512 Unable to Select multiple characters by Holding Shift Key + using Arrow key in Input Box

39918 QvaCore needs to be splitted

41653 Not enough space for text portuguese Documentation and Tutorial msi.

43502 IE 7 and 8: Can't export file or save to Excel when running https.

43388 QlikView - Sorting doesn't work as expected

43417 Ajax - Bug / Requirement Button for Refresh in Ajax - Version 10

43382 Qlikview server displaying old images using Bundle Info Load

43356 AJAX - Possible to drag an object inside a Container Object and even hide it

43360 Variable OnChange trigger not working with variable set with now()

43083 # character in "Link" type url passes "%23" to Browser URL

43396 QVS - High memory usage when using Inputfield with thousands of values in IE Plugin

43453 Double click to add server object doesn't work anymore version 10.00.8932

42930 System.Net.HttpListenerException

40546 List Box: Unchecking and then rechecking the Override Default Settings combobox does not save all current settings.

43509 Certificates, QMS: QDS service not removed from QVPR thus generating error log every ~20 sec

43571 AJAX - internal spaces removed

43393 QV crash when scrolling in pivottable

43359 Reload Issue using QlikView OCX version 10 SR3 and a OLEDB connection in the script

43391 Desktop - Dimension in pivot chart using indent mode doesn't resize as expected

43086 Reports created in QV 10 does not display table data in QV 11 (11095 and later)

42032 The label of the value of "0" doesn't display on stacked bars.


Page 37 of 37

43560 No logging in QVS for connection from distribution tasks

42022 WebView: QvAjax.js error when loading table

41780 De-selection and selection of either "Show Horizontal Scrollbar" and "Show Vertical Scrollbar" doesn't respond correctly.

43355 Configurable LDAP entries will changed from "dn" to "ADSPPATH"

43404 Objects not populated in Ipad/Ajax for a specific application

43398 Straight table height not correct in IE8 and Chrome with workbench

43400 RecNo() starts with 0 not with 1

42451 [Validation] EDX Task does not indicate failure properly

42948 [Validation] Document Toolbar not visible when browser is minimised (Sharing enabled)

42267 Alt+Tab starts Search in Firefox

40939 It is not possible to slide to other objects after selections are made in object(s) [HTC DeZ]

Date post:	08-Apr-2016
Category:	Documents
Upload:	carlo-serio
View:	367 times
Download:	5 times