28
QM101/QM102 Single & Dual QAM Encoders/Modulators L A U N A M N O I T C U R T S N I
QM101/QM102Single & Dual
QAM Encoders/Modulators
LAU
NA
M N
OITCU
RTS
NI
THIS PAGE IS LEFT INTENTIONALLY BLANK
1
Safety and Notice
Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
•DONOTapplypowertotheunituntilallconnectionshavebeenmade,allcomponentshavebeeninstalledandall wiring has been properly terminated.•DONOTterminate,changeoruninstallanywiringwithoutfirstdisconnectingtheunit’spoweradapterfromthedevice.•DONOTconnectthepowercordtothedeviceifthepower cord is damaged.•DONOTcutthepowercord.•DONOTplugthepowercordintoanACoutletuntilallcablesandconnectionstothedevicehavebeenproperly connected. •Thedeviceshouldbeinstalledinanenvironmentconsistentwithitsoperatingtemperaturespecifications.Avoidplacementnexttoheatingdevicesandductsbecausemaycausedamage.Thedeviceshouldnotbeplacedinareasofhighhumidity.•DONOTcoveranyofthedevice’sventilationopenings.•DONOTcoverorobstructthedevice’sfanorfanopenings.•Ifthedevicehasbeeninacoldenvironmentallowitto warm to room temperature for at least 2 hours before connectingtoanACoutlet.
Thepresenceofthissymbolistoalerttheinstallerandusertothepresenceofuninsulateddangerousvoltageswithintheproduct'senclosurethatmaybe of suffi cient magnitude to produce a risk of electric shock.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE. DO NOT OPEN THE UNIT. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
2
Table of Contents
INTRODUCTION..................................................…......3
FEATURES...........................................................………4
SPECIFICATIONS........................…………………………..5
INSTALLATION..............................................................7
SafteyPrecautions...………………………………….7
UnpackingandInspection..................................7
ProductPicturesandDiagrams............................7
InstallationProcedures………………………………8
CONNECTIONDIAGRAM............................................9
MODULATORSETUP……………………….......................11
InitialSetup&Configuration.............................12
VirtualChannelMapping………….....................16
REMOTESETUPPORT...................................................17
REMOTEACCESS&MONITORING……………………….20
WARRANTY.................................................................21
3
INTRODUCTION
TheQM101(Single)andQM102(Dual)isCElabs®technologyseriesofencoders/modulatorsthatconvertDigitalVideoBroadcasting(DVB)StandardandHighdefinitionvideoandaudiosignalstoaQAMRFoutput.
TheQM101andQM102areperfectformulti-videodistributionsolu-tionsinthecommercialandinstitutionalmarket(hotels,motels,sportsbars,restaurants,hospitals,casinos,businessanduniversitycampuses,etc.),aswellashomeentertainmentsystems.
• FrontpanelLCDDisplayforeasyinstallation• HighResolution1080i/(1080pforAVConly)• Standard,IRD,HRC• Composite,Component,andHDMI(unencrypted)inputs• MPEG2orMPEG4(AVC)VideoOutput• QAM256/QAM64SelectableforQM101• FixQAM256forQM102• ClosedCaptioningSupport• 40dBmVOutput• Adjustableattenuation• Rackmountable1RUheight• ConvertDigitalVideoBroadcasting(DVB)StandardandHighdefinitionvideo&audiosignalstoaQAMRFoutput
• Multi-videodistribution• FrontpanelLCDcontrol• RemoteWebbasesetupfunctions•
Manufactured under license of Dolby Laboratories•
ASI(optional)
Features
4
Input Connectors:
Video Support:
Audio Support:
Output Levels:
ModulationSupport:
Power Supply:
Consumption:
Languages:
Dimensions:
•Supports Dolby Digital Encoding•
RemoteWebbasemonitoringandstatus
Specifi cations
5
HDMIinput(Video+Audio)orDVI(Videoonly)
Y,Pb,PrComponentinput(Video) Compositeinput(Video)
L/RChannelAudioinput(Audio) CoaxialSPDIFinput(DigitalAudio,LPCM)
Dolby Digital EncodingOpticalSPDIFinput(DigitalAudio,LPCM)
75Ω input impedance
0.7–1.4V(peak-to-peak)480i/480p/576i/576p/720P50/720P60
1080i50/1080i601080p50/1080p60-(AVCEncodingonly)
Stereo/Digital0.4–0.8V(peak-to-peak)
HDMI™1.3c
54–864MHz(Ch#2-135)range40dBmV•75ohm•6MHzbandwidth
1-10dB±0.2dBAccuracy(11-20reference)MER–38dBmin.
1080i/720p/576i/576p/480p/480i 1080p@MPEG-AVC
AVCMP@Level4/MPEG2MP@HL MPEG1LayerII•AACDolby Digital Encoding64QAM/256QAM
100–240VAC
1300mA
English
482.7mmx240mmx44.4mm(19”x9.45”x1.75”)1RU
Input Connectors:
Video Support:
Audio Support:
Output Levels:
Modulation Support:
Power Supply:
Consumption:
Languages:
Dimensions:
QM102QM101
HDMIinput(Video+Audio)x2orDVI(Videoonly)
Y,Pb,PrComponentinput(Video)x2 Compositeinput(Video)x2
L/RChannelAudioinput(Audio)x2 CoaxialSPDIFinputx2(DigitalAudio,LPCM)Dolby Digital EncodingOpticalSPDIFinputx2(DigitalAudio,LPCM)75Ω input impedance
0.7–1.4V(peak-to-peak)480i/480p/576i/576p/720P50/720P60
1080i50/1080i601080p50/1080p60-(AVCEncodingonly)
Stereo/Digital0.4–0.8V(peak-to-peak)
HDMI™1.3c
54–864MHz(Ch#2-135)range40dBmV•75ohm•6MHzbandwidth
1-10dB±0.2dBAccuracy(11-20reference)MER–38dBmin.
1080i/720p/576i/576p/480p/480i 1080p@MPEG-AVC
AVCMP@Level4/MPEG2MP@HL MPEG1LayerII•AACDolby Digital Encoding
256QAM
100–240VAC
1700mA
English
482.7mmx240mmx44.4mm(19”x9.45”x1.75”)1RU
6
Package Contents• 1xQM101ORQM102• 1xpowercable• 1xinstallation/configurationmanual
7
Installation
SystemInstallermustadheretoArticle820-40oftheNECthatprovidesguidelines for proper grounding and specifi es that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.
Safety Precautions
Unpacking and InspectionEachunitisshippedfactorytested.Ensureallitemsareremovedfromthecontainer prior to discarding any packing material.
Thoroughlyinspecttheunitforshippingdamagewithparticularatten-tiontoconnectorsandcontrols.Ifthereisanysignofdamagetotheunit,ordamagedorlooseconnectors,contactCElabs®immediately.Donotputtheequipmentintoserviceifthereisanyindiciationofdefect or damage.
Product Pictures and Diagrams
QM101
QM102QM102
8
ConnectionsWerecommendthehighestqualitycablesbeusedforallvideoandaudiosource connections.1. TheunitisdesignedtoberackmountedinastandardEIA19"rack.
2. TheunitcomesstandardwithHDMI,Component,andCompositevideoinputs.TheQAMencoder/modulatorareintelligentlydesignedtodetectthevideoinputfromthevideosource.• HDMI:ConnecttheHDMIcable(s)fromthevideosource(s)intothe
HDMIinput(s).• Component Video:ConnecttheY(green),Pb(blue),andPr(red)
videosourcecabletotheunit'sComponentinputports.• Composite Video: use a 75ΩcoaxialcablewithRCAconnectors
to connect the video source(e.g.,CATV,DVD,VCR,Camera)totheunit'sCVBSinputs
3. Component/Composite Audio inputs:• Digital Audio: ConnectaDigitalAudioCoaxialcableorOptical
(Toslink) cable from the Digital Audio output of the source to theinput of the QAM modulator.
• Analog Left/Right Audio:useRCAcablestoconnecttheLeftandRightAudioOutputofthesourcetotheLeftandRightAudiototheQAM modulator.
Besurethevideoandaudioconnectionsforeachsourceareconsistentwiththeunit'sinputs(IN1...IN2dependingontheQAMmodel).
4. Useaquality75Ωcoaxialcablewith"F"connectorsfromtheQAMmodulator RF OUT jack to the distribution system or directly to atelevision.
5. Connecttheincludedpowercordtotheunit'sPOWER plug.
6. ConnectthepowercordtoanappropriatelyratedACpoweroutlet.
Installation Procedures
Connection Diagram QM101
9
QM101
Xbox
Example of installation
Blu Ray Video
Camera
HDMI
Component
RF Antenna
Composite
RF modulator Output
Remote web base controller optional
Xbox Blu Ray Video
Camera
HDMI
Component
Remote web base controller(optional)
QM101
CAT6
CAT6
QM102
RF Combiner
HeadendAmplifier
Building Distribution Network
HDMI
RF signals
Xbox
Example of installation
Blu Ray Video
Camera
HDMI
Component
RF Antenna
Composite
RF modulator Output
Remote web base controlleroptional
Xbox Blu Ray Video
Camera
HDMI
Component
Remote web base controller(optional)
QM101
CAT6
CAT6
QM102
RF Combiner
HeadendAmplifier
Building Distribution Network
HDMI
RF signals
Connection Diagram QM102
10
Xbox
Example of installation
Blu Ray Video
Camera
HDMI
Component
RF Antenna
Composite
RF modulator Output
Remote web base controlleroptional
Xbox Blu Ray Video
Camera
HDMI
Component
Remote web base controller (optional)
QM101
CAT6
CAT6
QM102
RF Combiner
Headend Amplifier
Building Distribution Network
HDMI
RF signals
11
MODULATOR SETUP
LCDDisplay Up/Downbuttons
OKbutton
HDMIInput(unencrypted)
CompositeInput(CVBS)
CombinedDigitalQAMOutput
ACInput
DigitalAudioInputsCoax&Optical
SPDIF
L/RAudio
Component Component
L/RAudio
DigitalAudioInputsCoax&Optical
SPDIF
RemoteSetup& Monitoring
CompositeInput(CVBS)
HDMIInput(unencrypted)
ClosedCaptioningInput
QM102
1stInput 2ndInput
Initial Setup & Configuration
Modulator ConfigurationTurnon theQAMmodulator.Once themodulator ispoweredup, itwillgothroughaninternalbootingprocess.Firstwillbedisplay:revofunitforasec-ond,then"Waiting"forfiveseconds,then"CElabsHDSeries"for30seconds,then"Running"fortwoseconds,andthentheunitwillbedisplayingBitratein-formationontheLCDDisplay.Theunitisreadyforprogrammingoroperation.• Password–PresstheOKbuttontoselecta4-digitpassword.UsetheUp/Downbuttontosearchandselectindividualnumbersforthepassword.Thedefaultpasswordis0000.PresstheOKbuttonforeach number to set the password.***NOTICE TO THE INSTALLER – SEVERAL INTERNAL FUNCTIONS ARE RESERVED OR SET ASIDE FOR FUTURE USE. SKIP OVER THESE 'RESERVE' MENUS WHEN SETTING UP THE ENCODER FOR YOUR APPLICATION• Advanced Menu–ToaccesstheAdvancedMenufirstenterthepasswordbypressingtheOKbutton.OncethecorrectpasswordisenteredpresstheOKbuttonandtheLCDScreenwilldisplay“AdvancedMenuOutputChannel”.ThefollowingconfigurationoptionsareavailableunderAdvancedMenu:
• Output Channel –UsetheUp/Downbuttontochangetheoutputchannel.Channels2to135areavailable.OncethedesiredoutputchannelisselectedpresstheOKbuttontosetthechannel.
TheLCDDisplaywillshowboththechannelnumber&thefrequencynumberoftheoutputchannel(example:80561.0000MHz)
Ifusingphysicalchannelnumber– theencoder'sMajorandMinornumberwill be set using the output channel. Example:OutputChannelissettoCh26.Thiswouldresultinthedisplaychannelof26-1ifinstallingadualchannel.Theoutputchanelwillbe26-1forinput1,and26-2forinput2.NOTE: It isnotpossibleonthedualmodulator tousetwodifferentchannelnumberslike26-1and51-1.Thetwooutputswillbeatthesamechannelnum-ber,differentsubchannel.Example:OututCh26,outputwillbe26-1and26-2
EnableVCNMenuforVCNMapping-ScrolltoVCNMenu.
• Attenuation–UsetheUp/DownbuttontoselectAttenuation.PresstheOKbuttontoentertheAttenuationmenu.UsetheUp/Downbuttontoselectthedesiredattenuationin1dBincrementsfrom0tominus20dBaccurately.OncethedesiredattenuationlevelisfoundpresstheOKbuttontoset.
12
13
Configuration Cont.
• Constellation–UsetheUp/DownbuttontoselectConstellation.PresstheOKbuttontoentertheConstellationmenu.SelectQAM256orQAM64.SelectthedesiredConstellationthenpresstheOKbuttontoset.FactorDefault:QAM256.QM102isfixedatQAM256
• Interleaver –Ifneeded,usetheUp/DownbuttontoselecttheappropriateInterleaverselection.PresstheOKbuttontoentertheInterleavermenu.UsetheUp/DownbuttontoselectthedesiredInterleavervalueandpresstheOKbuttontoset.Factorydefault:I=128,J=8.
• Channel Type–UsetheUp/DownbuttontoselectChannelType.PresstheOKbuttontoentertheChannelTypemenu.MenuoptionsareSTD,
HRCandIRC.Factorydefault:STD.UsetheUp/DownbuttontoselectthedesiredChannelTypeandpresstheOKbuttontoset.• RF Output–UsetheUp/DownbuttontoselectRFOutput.PresstheOKbuttontoentertheRFOutputmenu.OptionsareNomal,Inverted,orC.W.Factorydefault:Normal.UsetheUp/DownbuttontoselectthedesiredRFOutputandpresstheOKbuttontoset.
• Brightness–UsetheUp/DownbuttontoselectBrightness.PresstheOKbuttontoentertheBrightnessmenu.UsetheUp/DownbuttontoselectthedesiredBrightnessvalue(0to255)andpresstheOKbuttontoset.Factorydefault:128.
• Contrast–UsetheUp/DownbuttontoselectContrast.PresstheOKbuttontoentertheContrastmenu.UsetheUp/DownbuttontoselectthedesiredContrastvalue(0to255)andpresstheOKbuttontoset.Factorydefault:128.
• Saturation–UsetheUp/DownbuttontoselectSaturation.PresstheOKbuttontoentertheSaturationmenu.UsetheUp/DownbuttontoselectthedesiredSaturationvalue(0to255)andpresstheOKbuttontoset.Factorydefault:128.
• Hue–UsetheUp/DownbuttontoselectHue.PresstheOKbuttontoentertheHuemenu.UsetheUp/DownbuttontoselectthedesiredHuevalue(0to255)andpresstheOKbuttontoset.Factorydefault:128.
• Device Address–UsetheUp/DownbuttontoselectDeviceAddress.PresstheOKbuttontoentertheDeviceAddressmenu.UsetheUp/DowntoselecttheDesiredAddressrangingfrom1to255thenpressOKtoset.A unique device address is required if setting up morethan 1 encoder per site. This allows the user to distinguish eachdevice.
14
Confi guration Cont.
• Set TS (Transport Stream) ID–UsetheUp/DownbuttontosetTSID.PresstheOKbuttontoentertheTSmenu.UsetheUp/DowntoselecttheTSIDrangingfrom1to65535thenpressOKtoset.
• Set Region Name – Note: Do not Change. Skip this function.• Default Confi guration –
CAUTION: Once the OK button is pressed at the Default Confi g menu, the unit will automatically reset to the factory default settings. All settings or changed to the encoder/modulator will be lost.Ifyouwishtosetthemodulatorbacktothefactorydefaultsettings,usetheUp/DownbuttonstoreachDefaultConfiguration,thenpressOK.
• VCN–ToenableVirtualChannelMappingScrolltoVCNMenu.PressOKtoentertheVCNmenu.SelectEnabletoturnonVCNfunctionality.IfVCNisnotenabled-theoutputchannelswillbedependentontheoutput channel /physical number. Factory default: Disable.
• 1 Video Input –UsetheUp/Downbuttontoselect1VideoInput.PresstheOKbuttontoenterthe1VideoInputmenu.UsetheUp/Downbut-
tontoselecttheVideoInputoption:Auto,Composite,Component,HDMI,orASI*.Factorydefault:Auto.PresstheOKbuttontoset.
TheQAMseriesofEncoder/ModulatorsisdesignedwithIntelligentInputDetection (IID) technology. If you select Auto, the unitwill detect the videosource.Youcanset the inputsourceonanyof the input typesavailableonyourunit. If themodulatorhasmore thanonevideoinputscroll through theAdvancedMenufortheadditionalvideoinputmenus.(2VideoInputforDualUnit).*AnASIconnectionmaynotbepresentonyourmodel.SetASIifyoudesiretofixtheinputonASI.
• 1 Program Num–UsetheUp/Downbuttontoset1ProgramNum(Number).PresstheOKbuttontoenterthe1ProgramNummenu.UsetheUp/Downtoselectthe1ProgramNumrangingfrom1to65535thenpressOKtoset.IfthemodulatorhasmorethanonevideoinputscrollthroughtheAdvancedMenufortheadditionalProgramNummenus.(2ProgramNumforDualUnit).
• 1 Short Channel Name–UsetheUp/DownbuttontoselectShortChannelName.PresstheOKbuttontoentertheShortChannelNamemenu.UsetheUp/DownmenutoselectthefirstcharacterofthedesiredShortChannelNamethenpresstheOKbuttontoset.Repeatthepro-
cessuntiltheShortChannelNameiscompleted.IfthemodulatorhasmorethanonevideoinputscrollthroughtheAdvancedMenufor additional Short channel name menus.
The Short Name can be 7 characters long.FactoryDefault:MY-DVT1/MY-DVT2
15
1
Configuration Cont.
• 1 Long Ch Name–UsetheUp/DownbuttontoselectLongChannelName.PresstheOKbuttontoentertheLongChannelNamemenu.UsetheUp/DownmenutoselectthefirstcharacterofthedesiredLongChannelNamethenpresstheOKbuttontoset.RepeattheprocessuntiltheLongChannelNameiscompleted.IfthemodulatorhasmorethanonevideoinputscrollthroughtheAdvancedMenuforadditionalLongchannel name menus.FactoryDefault:ATSC-Digital-TV1/ATSC-DIGITAL-TV2.TheLongNamecanbe16characterslong.
• 1 Source ID–UsetheUp/Downbuttontoset1SourceID.PresstheOKbuttontoenterthe1SourceIDmenu.UsetheUp/Downtoselectthe1SourceID.Range:1to65535.PressOKtoset.IfthemodulatorhasmorethanonevideoinputscrollthroughtheAdvancedMenufortheadditionalSourceIDmenus.(2SourceIDforDualUnit).
• 1 Aspect Ratio–UsetheUp/Downbuttontoselect1AspectRatio.PresstheOKbuttontoenterthe1AspectRatiomenu.UsetheUp/DownbuttontoselectthedesiredAspectRatiooptionof4:3or16:9thenpresstheOKbuttontoset.Factorydefault:4:3.IfthemodulatorhasmorethanonevideoinputscrollthroughtheAdvancedMenuforadditionalAspectRatiomenus.
• 1 Video Output–TheQM101&QM102Encoders/ModulatorsisDualMODECapable.TheusermayselecttooutputvideoineitherMPEG2orAVC(MPEG4).UsetheScrollUp/Downbuttontoselect1VideoOutput.PresstheOKbuttontoenterthe1VideoOutputmenu.UsetheUp/Downbuttontoselectthe1VideoOutputoption:MPEG2orAVC.Factorydefault:MPEG2.PresstheOKbuttontoset.IfthemodulatorhasmorethanoneVideoOutputscrollthroughtheAdvancedMenufortheadditionalVideoOutputmenus.Note:TheDualInputUnitallowstheinstallertoselectacombinationofVideoOutputformats.TheQM102caneitherhavebothoutputsbroadcastingineitherMPEG2orAVC(MPEG4)oracombinationofbothMPEG2andAVC(MPEG4).
• 1 Audio Input–UsetheUp/Downbuttontoselect.PresstheOKbuttontoenterthe1AudioInputmenu.UsetheUp/Downbuttontoselectthe1AudioInputoption:Analog(L/R),Coaxial,orOptical.Factorydefault:Analog.SelecttheappropriateInputselectionforyourinstallation.PresstheOKbuttontoset.IfthemodulatorhasmorethanoneAudioInputscrollthroughtheAdvancedMenufortheadditionalAudioInputmenus.
16
Configuration Cont.
• 1 Audio Output –UsetheUp/Downbuttontoselect1AudioOutput.PresstheOKbuttontoentertheAudioOutputmenu.UsetheUp/DownbuttontoselecttheAudioOutputoption:AC3(AC-3PassThrough),MP2(MPEG2LayerIAudio),orAAC.Factorydefault:MP2.PresstheOKbuttontoset.IfthemodulatorhasmorethanoneAudiooutputscrollthroughtheAdvancedMenufortheadditionalAudioOutputmenus.
• 1 Closed Caption–UsetheUp/Downbuttonto1ClosedCaption.PresstheOKbuttontoenterthe1ClosedCaptionmenu.Enable/Dis-
able1ClosedCaptioncontrol.IfthemodulatorhasmorethanoneVideoOutputscrollthroughtheAdvancedMenufortheadditionalClosedCaptionmenus.
NOTE: WHEN USING CLOSED CAPTIONING - USER MUST CONNECT FROM THE CONTENT SOURCE THE COMPOSITE OUTPUT OR CC OUTPUT SOURCE TO THE ENCODER'S CVBS INPUT CONNECTOR.
VIRTUAL CHANNEL (VCN) MAPPING–TheCElabs®Encoderoffersvirtualchannel mapping capability.
Example:Theoutputchannelissetto103(699.0000MHz).TheusercansetaVCN(VirtualChannelNumber)byenablingtheVCNfunction.TheIntegratorcan map the Virtual Channel number to 57. The Virtual Channel Numberdisplayedwouldbe57.TheVCNisindependentoftheoutput/physicalchannel.
• 1 VCN Channel–UsetheUp/Downbuttonto1VCNChannelintheAdvancedMenu. Press theOKbutton to enter the1VCNChannelmenu.Setthe1VCNChannelusingtheUp/Downbuttons.SetVirtualChannelfrom1-16383.Iftheunithasmorethan1inputScrolltoset2VCNChannelintheAdvancedMenu.PresstheOKbuttontoenterthe2VCNChannelmenu.Set2VCNChannelusing theUp/Downbuttons.SetVirtualChannelfrom1-16383.
NOTE: We recommend setting a unique number for each program (1VCN, 2VCN)
Toexit the Advanced Menu,usetheUp/DownbuttontoselectExitthenpresstheOKbutton.ExitExitMenuwillappearontheLCDscreen.Press theOKbuttontwicetoexit.
***** Important – Save the Settings *****
Once the settings aremade and themodulator is programmed (a) removepower from the unit by disconnecting the power supply cable from the rear of theunit,(b)wait5secondsand(c)reconnectthepowercable.Thiswillallowthe modulator to capture the new settings.
REMOTE SETUP PORT
17
Procedure to connect the Encoder via the remote setup port
(Intranet setup – closed LAN setup)
1–PoweruptheEncoder2–PresstheOKbuttonontheFrontPanel3–EnterthePassword0000toenterAdvancedMenuSetup4–ScrolltotheDeviceAddressMenu
5–SetauniqueDeviceaddressforeachencoderbeinginstalledinthe system
DeviceAddressrangesfrom1–255
WARNING:Settingthe"DEVICEADDRESS"to0willclearthenetworksettingtoDefaultvalue
6–ConnecteachencoderusingastandardCAT5ecablefromtheRemoteSetupport(locatedontherearpaneloftheencoder)toaswitch.ConnectaCAT5ecablefromtheswitchaPC
NOTE:ToconnecttheencoderdirectlytoaPC,useaCAT5eCrossovercable
7–SetthePCviatheControlPanelto"ObtainanIPaddressautomatically"
Start>ControlPanel>ViewNetworkStatusandTasks
REMOTE SETUP PORT
18
8–Select'ChangeAdapterSettings'
9–Select'InternetProtocolVersion4(TCP/IPv4)Properties'
10–Select'ObtainanIPaddressautomatically'&'ObtainDNSserveraddressautomatically'
11–AftersettingthePCtoobtainanIPaddress&DNSserverautomatically
Start>Computer>Network
12–AfterselectingNetwork,theencoderswillshowupontherightsideunderMediaDevices.EachdevicewillshowupbyDeviceAddress.
(CElabs001,002,003…)
13–Click the icon of the Encoder you want to setup
19
14–Select'ViewDeviceWebpage'15–Welcomepagewillbedisplayedasshown
16–SelecttheCommonSetuptab.Userwillbepresentedwithencoders"AuthenticationRequired'screen
17–EnterUserNameandPasswordUN:adminPW: Admin123
18–ChangesettingsoftheencoderviatheCommonSetup,EncoderSetup,NetworkConfiguration,andAdministrationTabs
19–SelectNetworkConfigurationTab
20–Confirm'EnableDHCP'checkboxisselectedforclosedin-housenetwork(IfusinginternettoconnecttotheEncoder,seeInternetsetupprocedure)
21–Save all changes.TheuserisrequiredtodoalocalsaveifanychangedaremadeontheCommon/EncoderSetuptabs.Onceallchangeshavebeenmadeandarecomplete-usetheUpload and Reboot function to apply changes'Waiting for device rebooting'willappearasunitrebootsandsavethechanges.Aftertheencoderrecoversfromrebooting-werecommendyousave/backuptheconfigurationfile for each encoder.
22–SelectAdministrationTab-thenBackup. A config.hex file will be created.ThefilewillbelocatedinMyComputer>CDirectory>Documents&Settings>User>MyDocuments>Downloads>configs.hex
NOTE TO INTEGRATORWE HIGHLY RECOMMEND YOU RENAME THE CONFIG.HEX FILES FOR EACH ENCODER DEVICE
EXAMPLE:config_single_dev1_sitename.hex
CONFIGURATION FILES FOR THE SINGLE AND DUAL ENCODERS ARE DIFFERENT AND ARE NOT INTERCHANGEABLE
REMOTE SETUP PORT
20
REMOTE ACCESS & MONITORINGProcedure to connect the Encoder for remote access & monitoring
Overview of Setup
AccessingtheEncoders,viatheinternet,willrequireaVPNdevicewithaStaticIP
1–UsingtheinstructionslocatedinProceduretoconnecttotheEncodervia theremotesetupport,enterauniqueDeviceAddressforeachencoder2–Setupeachencoder'soutputchannelandotherparametersasrequired3–SelecttheNetworkConfigurationTab4–Deselect'EnableDHCP'5–EnterauniqueStaticIPaddressforeachencoder6–EntertheSubnetMask7–EntertheGatewayIPaddressfromVPNdevice8–SaveConfigurationofNetworksettingsbyselectingSaveConfigbutton9–ConnecttheethernetswitchtotheVPNDevice(StaticIPRequired)connectedtotheinternet.ContactyournetworkadministratorfortheVPN
devicesetup10–EstablishaVPNconnectionfromaPCorlaptopfromanexternalinternet connection11–OncetheVPNtunnelhasbeenestablished,entertheSpecificIP address of the encoder you wish to monitor in your internet browser. Example:192.168.100.1012–Saveanychangesmadetotheencoderandrebootencoder
ENCODER S
W
I
T
C
H
V
P
N
R
O
U
T
E
R
MODEM PC
ENCODER
ENCODER
DEV 2
DEV 3
DEV 1
TheSELLERwarrantstheQM101&QM102,SingleandDualInput,QAMEncoders/Modulators to be free from defects in the material and workmanship for1yearfromthedateofpurchasefromtheSELLERoranauthorizeddealer.Should this product fail to be in good working order within the 1 year warran-typeriod,theSELLER,attheiroption,willrepairorreplacetheunit,providedthat the unit has not been subjected to accidental damage, disaster, static dischargeandpowersurge,abuseoranyunauthorizedmodifications.ThiswarrantyisofferedbytheSELLERforitsBUYERwithdirecttransactiononly. This warranty is void if the warranty seal on the metal housing is broken.
Aunitthatfailsunderconditionsotherthanthosecoveredwillberepairedatthe current price of parts and labor in effect at the time of repair. Such repairs arewarrantedfor90daysfromthedayofreshipmenttotheBUYER.Iftheunitisdeliveredbymail,customersagreetoinsuretheunitorassumetheriskoflossordamageintransit.UndernocircumstanceswillaunitbeacceptedwithoutaReturnAuthorizationNumber(RMA#).
Thiswarrantyisinlieuofallotherwarrantiesexpressedorimplied,includingwithout limitations, any other implied warranty, or suitability, or merchantability foranyparticularpurpose,allofwhichareexpresslydisclaimed. Proofofsalemayberequiredinordertoclaimwarranty.CustomersoutsideUSAareresponsibleforshippingchargestoandfromtheSELLER.Cables and power adapters are limited to a 30 day warranty and must be free from any markings, scratches, and neatly coiled.
Thecontentofthismanualhasbeencarefullycheckedandisbelievedtobeaccurate.However,TheSELLERassumesnoresponsibilityforanyinaccuraciesthatmaybecontainedinthismanual.TheSELLERwillNOTbeliablefordirect,indirect, incidental, special, or consequential damages resulting from any de-fectoromissioninthismanual,evenifadvisedofthepossibilityofsuchdam-ages.Also,thetechnicalinformationcontainedhereinregardingtheQM101&QM102featuresandspecificationsissubjecttochangewithoutfurthernotice.
CElabs3209WoodDrive.Garland,TX75041(469)429-9200(800)767-6189Fax:(469)429-9205 21
WARRANTY
22
INSTALLER NOTES
PurchasingDate: S/N:
23
INSTALLER NOTES
PurchasingDate: S/N:
THIS PAGE IS LEFT INTENTIONALLY BLANK
THIS PAGE IS LEFT INTENTIONALLY BLANK
CElabscansupportmanyareasofyouraudioandvideodistribution needs.
We manufacture:• DigitalSignagesoftwareandMediaPlayers• HDMatrixSwitchers• RFamplifiers• HDMIandComponentHDdistributionamplifiers• CAT5SignalExtenders• VGAExtendersandSplitters• andcablesofalltypes.
See our full product line at www.celabs.net
3209WoodDriveGarland,TX75041Phone:(469)429-9200Tollfree:(800)767-6189Fax:(469)429-9205www.celabs.net
WARRANTYCable Electronics, Inc. warrants this product to be free from defects in material and workmanship, under normal use and service, for a period of one year from the purchase by the original purchaser. If this product is defectiveor malfunctions, CableElectronics will replace or repair this unit (attheir option)within a reasonable time. Noexpressedor implied warranty is made for any defects caused by immersion or exposure to liquids, abuse, neglect, improper operation of unit, excess wear and tear and defects resulting from unauthorized disassembly and or modification.
Document:900-5067-01Rev.A
