Date post: | 31-Dec-2015 |
Category: |
Documents |
Upload: | agatha-ball |
View: | 215 times |
Download: | 0 times |
QNX BASED SOFTWAREQNX BASED SOFTWAREFOR PARTICLE ACCELERATOR FOR PARTICLE ACCELERATOR CONTROL SYSTEM OF FLNRCONTROL SYSTEM OF FLNR
Vitaly AleynikovVitaly Aleynikov
Flerov’s Laboratory of Nuclear Reactions, Flerov’s Laboratory of Nuclear Reactions, JINRJINR
FLNR, JINRFLNR, JINR 22
Since 1999 we have been using Supervisory Control and Data Acquisition Since 1999 we have been using Supervisory Control and Data Acquisition (SCADA) software named FlexCtrl 4 (BitCtrl Systems Ltd., Germany). It runs under UNIX-(SCADA) software named FlexCtrl 4 (BitCtrl Systems Ltd., Germany). It runs under UNIX-style commercial real-time operating system QNX (QNX Software Systems Ltd., Canada). style commercial real-time operating system QNX (QNX Software Systems Ltd., Canada).
It was designed and put into operation control systems for 6 charged particles It was designed and put into operation control systems for 6 charged particles accelerators and radiating installations. Two more cyclotrons (DC-72 and DC-60) are at the accelerators and radiating installations. Two more cyclotrons (DC-72 and DC-60) are at the final stage: assembled, tested in FLNR and ready for shipping .final stage: assembled, tested in FLNR and ready for shipping .
YearYear ProjectProject DescriptionsDescriptions CountryCountry ProcessProcessvariablesvariables
20012001 EA-10/10EA-10/10 Electron acceleratorElectron accelerator GermanyGermany 18001800
20022002 DRIBsDRIBs Dubna Radioactive Ion BeamsDubna Radioactive Ion Beams RussiaRussia 35003500
20032003 ECR CyLabECR CyLab ECR ion sourceECR ion source SlovakiaSlovakia 28002800
20032003 U-400U-400 Isochronous CyclotronIsochronous Cyclotron RussiaRussia 46004600
20042004 U-U-400M400M Isochronous CyclotronIsochronous Cyclotron RussiaRussia 52005200
20052005 IC-100IC-100 Isochronous CyclotronIsochronous Cyclotron RussiaRussia 37003700
……20072007 DC-60DC-60 Isochronous CyclotronIsochronous Cyclotron KazakhstanKazakhstan 57005700
……20082008 DC-72DC-72 Isochronous CyclotronIsochronous Cyclotron SlovakiaSlovakia 76007600
RTOS QNX 4RTOS QNX 4 ++ SCADA FLEXCTRLSCADA FLEXCTRL
FLNR, JINRFLNR, JINR 33
After 6 After 6 years of using this commercial software there were developed years of using this commercial software there were developed custom visualization library and acustom visualization library and a lot of device drivers, that successfully replace lot of device drivers, that successfully replace and expand the regular software. and expand the regular software.
We have designed and integrated in SCADA device drivers for the We have designed and integrated in SCADA device drivers for the following hardware:following hardware:
SMARTBOX data acquisition module (FLNR, Russia)SMARTBOX data acquisition module (FLNR, Russia) Rotating encoder input device (FLNR, Russia)Rotating encoder input device (FLNR, Russia) RADIS GM2524-100 RF generator (RADIS Ltd., Russia)RADIS GM2524-100 RF generator (RADIS Ltd., Russia) EVPU PS24-500, PS15-30, PS25-120 power supplies (EVPU, Slovakia)EVPU PS24-500, PS15-30, PS25-120 power supplies (EVPU, Slovakia) DANFYSIK power supplies models 883, 853T, 855 (DANFYSIK A/S, Denmark)DANFYSIK power supplies models 883, 853T, 855 (DANFYSIK A/S, Denmark) FESTO DGE positioning system (Festo AG, Germany)FESTO DGE positioning system (Festo AG, Germany) PFEIFFER TPG-256, 261 vacuum measurement and control units (Pfeiffer Vacuum PFEIFFER TPG-256, 261 vacuum measurement and control units (Pfeiffer Vacuum
GmbH, Germany)GmbH, Germany) KEITHLEY digital multimeter model 2000 (Keithley Instruments Inc., USA)KEITHLEY digital multimeter model 2000 (Keithley Instruments Inc., USA) AGILENT 33220A function/arbitrary waveform generator (Agilent Technologies, AGILENT 33220A function/arbitrary waveform generator (Agilent Technologies,
USA)USA) AMI Model 420 Power Supply Programmer (American Magnetics, Inc., USA)AMI Model 420 Power Supply Programmer (American Magnetics, Inc., USA)
FLNR, JINRFLNR, JINR 44
Requirements to OSRequirements to OS
1)1) PC (x86) platform supportPC (x86) platform support because all control system because all control system nodes were x86 basednodes were x86 based
2)2) Multi-taskingMulti-tasking and suitable inter-process communication and suitable inter-process communication technique to run at the same time PLC's protocol driver, technique to run at the same time PLC's protocol driver, HMI, RTDB server and printer managerHMI, RTDB server and printer manager
3)3) Good Good network integrationnetwork integration to link remote nodes allocated to link remote nodes allocated over large areaover large area
4)4) OpennessOpenness and ease to write and integrate and ease to write and integrate device driver device driver for custom hardwarefor custom hardware
5)5) Provide an Provide an embedded windowing systemembedded windowing system with full-featured with full-featured GUI to afford convenient Human-Machine InterfaceGUI to afford convenient Human-Machine Interface
6)6) Have Have powerful development toolspowerful development tools to create application to create application softwaresoftware
7)7) Real-time and Real-time and fault tolerantfault tolerant8)8) Be Be commercial, well knowncommercial, well known and have good customer and have good customer
supportsupport9)9) Have choice of SCADAHave choice of SCADA software software
FLNR, JINRFLNR, JINR 55
Operating systemOperating system
MS Windows NTMS Windows NT QNXQNX LinuxLinux UNIXUNIX OS-9OS-9 pSOSpSOS VxWorksVxWorks
FLNR, JINRFLNR, JINR 66
Operating systemOperating system
MS Windows NTMS Windows NT QNXQNX LinuxLinux
FLNR, JINRFLNR, JINR 77
Operating systemOperating system
Commercial, over 20 years of real-time OS Commercial, over 20 years of real-time OS experience on x86 platforms, outsells every experience on x86 platforms, outsells every other real-time OS for PCs supported in almost other real-time OS for PCs supported in almost 100 countries worldwide100 countries worldwide
Designed for real-time control and open for Designed for real-time control and open for custom software/hardwarecustom software/hardware
UNIX-style, scalable, multi-user, multi-tasking, UNIX-style, scalable, multi-user, multi-tasking, network and POSIX-compliantnetwork and POSIX-compliant
Supports Photon microGUI as Windows-like Supports Photon microGUI as Windows-like graphical user interfacegraphical user interface
Has Rapid Application Development tool Has Rapid Application Development tool Photon Application BuilderPhoton Application Builder
Has choice of Has choice of Supervisory Control and Data Supervisory Control and Data Acquisition (Acquisition (SCADA) softwareSCADA) software
QSSLQSSLQNX Software Systems QNX Software Systems
Ltd. CanadaLtd. Canada
FLNR, JINRFLNR, JINR 88
SCADA software for SCADA software for QNXQNX SitexSitex RealflexRealflex FlexCtrlFlexCtrl PCP VirgoPCP Virgo Fiord microSCADAFiord microSCADA
FLNR, JINRFLNR, JINR 99
SCADA software for SCADA software for QNXQNX
FlexCtrlFlexCtrl is a process control system for the automation is a process control system for the automation of technological processesof technological processes
FlexCtrlFlexCtrl is modular and extremely scalable is modular and extremely scalable FlexCtrlFlexCtrl is a pure software system, no specific or is a pure software system, no specific or
special hardware is needed for process control. The special hardware is needed for process control. The interface to the system is open and the user has the interface to the system is open and the user has the possibilitypossibility adding custom device driver adding custom device driver to the system to the system
All parts of the All parts of the FlexCtrlFlexCtrl application can be application can be managed with the project engineering system, managed with the project engineering system, which configures process model (process which configures process model (process variables with all characteristics)variables with all characteristics)
FlexCtrlFlexCtrl includes Process Model Editor, Graphics includes Process Model Editor, Graphics Editor, Network Configurator, User Editor, Network Configurator, User Administrator, Driver, Visualization and Run-time Administrator, Driver, Visualization and Run-time CompilersCompilers
BitCtrl Systems Ltd., BitCtrl Systems Ltd., GermanyGermany
FLNR, JINRFLNR, JINR 1010
Project development Project development softwaresoftware
RTOS QNX 4
SCADAFlexCtrl
ApplicationBuilder
ProjectEngeneering
Watcom CDeviceDriver
Run-timeSystem
HMI
DevelopmentRun-time
PhotonmicroGUI
For creating Human to Machine Interface For creating Human to Machine Interface (HMI) we use Photon Application Builder (HMI) we use Photon Application Builder instead of the FlexCtrl Graphics Editor. instead of the FlexCtrl Graphics Editor. Application Builder compiles GUI and Application Builder compiles GUI and custom function and image libraries into custom function and image libraries into the HMI application.the HMI application.
All parts of the FlexCtrl application can be All parts of the FlexCtrl application can be managed with the project engineering managed with the project engineering system, which configures process model system, which configures process model (process variables with all characteristics). (process variables with all characteristics). The system includes Process Model Editor, The system includes Process Model Editor, Graphics Editor, Network Configurator, Graphics Editor, Network Configurator, User Administrator, Driver, Visualization User Administrator, Driver, Visualization and Run-time Compilers.and Run-time Compilers.
The QNX package includes the Watcom The QNX package includes the Watcom С/С++ С/С++ highly optimizing compiler and highly optimizing compiler and debugger. We use it for creating custom debugger. We use it for creating custom hardware drivers.hardware drivers.
FLNR, JINRFLNR, JINR 1111
Application softwareApplication software
FlexCtrl project engineering systemFlexCtrl project engineering system
All parts of the FlexCtrl application All parts of the FlexCtrl application can be managed with the project can be managed with the project engineering system, which engineering system, which configures process model (process configures process model (process variables with all characteristics). variables with all characteristics). The system includes Process Model The system includes Process Model Editor, Graphics Editor, Network Editor, Graphics Editor, Network Configurator, User Administrator, Configurator, User Administrator, Driver, Visualization and Run-time Driver, Visualization and Run-time Compilers.Compilers.
FLNR, JINRFLNR, JINR 1212
Application softwareApplication software
HMI development. Photon Application BuilderHMI development. Photon Application Builder
For creating Human to Machine For creating Human to Machine Interface (HMI) we use Photon Interface (HMI) we use Photon Application Builder instead of the Application Builder instead of the FlexCtrl Graphics Editor. Application FlexCtrl Graphics Editor. Application Builder compiles GUI and custom Builder compiles GUI and custom function and image libraries into the function and image libraries into the HMI application.HMI application.
FLNR, JINRFLNR, JINR 1313
IPC and data flowIPC and data flow
QNX depends on the exchange of discrete packets of QNX depends on the exchange of discrete packets of information – information – messagesmessages – to handle virtually all inter-process – to handle virtually all inter-process communication. Message passing lies at the heart of the communication. Message passing lies at the heart of the operating system’s microkernel architecture, giving the OS its operating system’s microkernel architecture, giving the OS its modularity. This paradigm applies to all levels of modularity. This paradigm applies to all levels of programming, from device drivers to file system and LAN.programming, from device drivers to file system and LAN.
FlexCtrl strongly uses this message passing technique as for FlexCtrl strongly uses this message passing technique as for internal run-time communication as for interfacing to device internal run-time communication as for interfacing to device drivers. Every job of some significance in FC is handled drivers. Every job of some significance in FC is handled through a single computational process (server). FlexControl through a single computational process (server). FlexControl comprises a long list of these tasks:comprises a long list of these tasks:
Process administration and process supervisionProcess administration and process supervisionReal-time database (RTDB)Real-time database (RTDB)Calculation server (Soft SPC tasks)Calculation server (Soft SPC tasks)Visualization server and HMIVisualization server and HMIAlarm serverAlarm serverMessage serverMessage serverProtocol driversProtocol drivers
Fieldbus protocoldriver
Serial portdriver
RAW values (DAC, ADC, DIN, DOUT)
RTDB
Algorythms, Automaticcontrol, Calculation,
Data conversion
Calculationserver
Hardware specificdriver
OPERATIONAL values (V, A, Torr, etc.)
RTDB
Visualizationserver
Message Queueserver
Eventmessage
queue
ProcessMonitoring
HMI
Trends, Errors, Logs, etc.
Historical DB
Historyserver
Error messages,Log messages,
Trends, etc.
ProcessControl
SCADA FlexCtrl
Eventmessage
queue
ProcessMonitoring
HMI
ProcessControl
- INPUT Data
- Commercial software
- Process Variables
- Custom software
- OUTPUT Data
FLNR, JINRFLNR, JINR 1414
Application softwareApplication software
DC-72 cyclotron control system HMI (channel B6 beam line )DC-72 cyclotron control system HMI (channel B6 beam line )
FLNR, JINRFLNR, JINR 1515
Application softwareApplication software
DC-72 cyclotron control system HMI (cyclotron vacuum system )DC-72 cyclotron control system HMI (cyclotron vacuum system )
FLNR, JINRFLNR, JINR 1616
ConclusionConclusion
At present time we do not have serious problems with the selected At present time we do not have serious problems with the selected solution (QNX and FC) and we will continue using it for the further projects. solution (QNX and FC) and we will continue using it for the further projects.
+ The benefits are:The benefits are:
Stability since the core of Stability since the core of the OS and SCADA system the OS and SCADA system is well optimized and testedis well optimized and tested
Development tools decrease Development tools decrease total project engineering total project engineering time and allows time and allows concentrating more on concentrating more on visualization and visualization and automation algorithmsautomation algorithms
Flexibility. Openness and Flexibility. Openness and good interaction possibility good interaction possibility allows easily add new allows easily add new hardwarehardware
% The disadvantages are:The disadvantages are:
Lack of QNX 4 device Lack of QNX 4 device drivers for the most recent drivers for the most recent hardware (video, network)hardware (video, network)
In a few years QSSL and In a few years QSSL and BitCtrl will not provide BitCtrl will not provide support for outdated support for outdated software versions (QNX 6 software versions (QNX 6 and FC 6 are available now)and FC 6 are available now)
Poor support of office Poor support of office application softwareapplication software