QOM-eLED
TOP TRAY
0 - 10VDIM-MOD 1
0 - 10VDIM-MOD 1
0 - 10VDIM-MOD 1
1.07"
1.36"
4.75"
5 Knockouts of 1.07" Hole for 3/4" fitting
4 Knockouts of 1.36" Hole for 1" fitting
14.5"
9.00"
HOUSING● 18 gauge Welded Steel Enclosure: 9.00"W x 14.5"H x 4.75"D● Door: 9.05"W x 14.5"H● Knockouts: 21● Built-in support bracket incorporated to secure housing for surface mounting
Prim. V Sec. V
QOM-eLED UNV 24DIM OptsSizeModel
+
PROJECT NAME DATE TYPE NOTECOMPANY
© 2017, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com 1
2017.V01
2 Primary Voltage
UNV: 120-277 Vrms
3 Secondary Voltage 12VDC 24VDC
0-10V
Max Prim. @ 277V1 Size Max Load
(Watts)Max Prim.
Amps @ 120VMax Prim.
Amps @ 277VSecondary
Voltage(12/24VDC)
1x60W 12VDC12VDC12VDC
24VDC24VDC24VDC
0.9 A1.4 A2.0 A
1.1 A2.2 A3.4 A
2x60W0.4 A0.6 A0.9 A
0.5 A1.0 A1.5 A
4 Dimmer
5 Options
QOM-eLED-100-UNV/24+0-10V
Ordering Example
ORDERING GUIDE
3x60W
1x100W 2x100W3x100W
60W120W180W
100W200W300W
BK Black Powder Coat SS 316L Satin StainlessHousing and Door Finish ( Standard )
FEATURES● Limited output voltage and current, plus isolation for safe operation ● Dimmable w/ additional 0-10V Dimming Module● Fully potted driver(s) for moisture resistance● Suitable for dry, damp and wet locations● Suitable for Indoor or Outdoor Use● Suitable for Use with Submersible Luminaire ● Primary Voltage - Universal (120-277V )● Wide operating temperature range: 4ºF ~ +104ºF● Fits up to (3): 60W 12VDC or (3):100W 24VDC driver(s) and 0-10V dimming module(s) in the same housing● Driver has Class A sound rating● Class 2 Output ● 5 year warranty ● CSA #239924 Low Voltage Lighting Systems : CSA Class 3425-15 and Class 3425-95 : CSA Standard C22.2 No. 250.0-08 - Luminaires : ANSI/ UL Standard 2108 - Low Voltage Lighting Systems : CSA Std C22.2 No 250.13-14 - Light Emitting Diode (LED) Equipment for Lighting Applications : ANSI/ UL Standard 8750 - Light Emitting Diode (LED) Equipment for Use in Lighting Products Landscape Lighting Systems : CSA Class 3426-04 and Class 3426-94 : CSA Standard C22.2 No. 250.7-07 - Extra-Low-Voltage Landscape Lighting Systems : ANSI/ UL Standard 1838 - Low Voltage Landscape Lighting Systems : CSA Std C22.2 No 250.13-14 - Light Emitting Diode (LED) Equipment for Lighting Applications : ANSI/ UL Standard 8750 - Light Emitting Diode (LED) Equipment for Use in Lighting Products
QOM-eLED is Q-Tran's surface mount, outdoor rated electronic power supply, utilizing the Xitanium driver from Advance. These drivers provide a 12VDC or 24VDC, constant voltage output, with optional 0-10V dimming modules.
LED DRIVER 2 (120V - 277V)
LED DRIVER 1 (120V - 277V)
LED DRIVER 3 (120V - 277V)
BOTTOM TRAY
PRIMARYSECONDARY
NEU
GND
HOT+ +- -+ +- -
© 2017, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com 3
QOM-eLED
SPECIFICATIONS
0
20
40
60
80
100
120
25 30 35 40 45 50 55 60 65 70 75 80 85 90
Life
Tim
e (k
Hrs
)
Case Temperature (ºC)
Life Time vs. Case Temperature
9085
80757065
6055
500 20 40 60 80 100
20 40 60 80 100
Effici
ency
(%)
% Rated Load
Efficiency, 12VDC
120Vrms 277Vrms
Output Current (A)120Vrms 277Vrms
Output Current (A)120Vrms 277Vrms
% Rated Load120Vrms 277Vrms
11.4
11.6
11.8
12
12.2
0 1 2 3 4 5 6
Out
put V
olta
ge (V
)
Vout vs. Iout, 12VDC
100
90
80
70
60
500
Effici
ency
(%)
Efficiency, 24VDC
23.423.523.623.723.823.9
2424.124.2
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5
Out
put V
olta
ge (V
)
Vout vs. Iout, 24VDC
© 2017, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com 2
QOM-eLED
SPECIFICATIONS
▪ CSA Certified : UL-2108 : UL- 1838
: UL- 8750 : CSA C22.2 No 250.7-07: CSA C22.2 No 250.0-08: CSA C22.2 No 250.13-14
239924
PERFORMANCE▪ Power Supply : Rated for surface mount or outdoor use : Fully rated to operate low voltage load at listed wattage (No Derating Required) : Voltage regulation to 5% or less of rated output voltage : The ability to be dimmed using 0-10V Dimming : Universal input range of 120-277 Vrms Landscape Lighting System Components : CSA Class 3426-04 and Class 3426-94 Low Voltage Lighting Systems : CSA Class 3425-15 and Class 3425-95 : Short circuit protection (SCP) : Overload protection (OLP) : Live tested by manufacture to ensure proper operation : Manufactuer offers minimum of 5 year warranty▪ Terminal blocks is made of tin plated copper with a voltage rating of 300V and a current rating of 40A
12VDC 24VDC
*- 200us event
Min Nom Max
Input▪ Input Voltage (Vrms)▪ Input current, max (Arms)
Output▪ Output Voltage, nom (V)▪ Output Current (A)
Environmental▪ THD (%) ▪ PF (%) ▪ Case Temp (°C)
1200.98
2300.51
2770.42
▪ Inrush Current, max* (Apk)▪ Input Frequency (Hz)
45 9050/6070
125.060
100
▪ Input Power (W)
0.90------------ ----
02--------
90
▪ Output Power (W)▪ Dimming 0-10V, max
SPECIFICATIONS
Min Nom Max
1200.58
2300.30
2770.25
---- ---- ----50/60117
244.1100
2mA
0.90------------ ----
02--------
90
12VDC 24VDC
Protections▪ Short Circuit Protection (SCP)▪ Overload Protection (▪ Class 2 Output
OLP)
Compliance ▪ EMI Spec : FCC 47 Part 15 : CISPR 15 : CISPR 22 Class A
WIRE LENGTH TABLE
17254080
100
VOLTAGE DROP CHART
(W)VDC
897’ 564’ 355’ 223’ 140’ 88’ 55’ 35’ 22’567’ 356’ 224’ 141’ 88’ 56’ 35’ 22’ 14’309’ 194’ 122’ 77’ 48’ 30’ 19’ 12’ 7’130’ 82’ 51’ 32’ 20’ 13’ 8’ 5’ 3’
84’ 53’ 33’ 21’ 13’ 8’ 5’ 3’
24
10 AWG(5.6mm2)
12 AWG(3.3mm2)
14 AWG(2.0mm2)
16 AWG(1.3mm2)
18 AWG(0.78mm2)
20 AWG(0.50mm2)
22 AWG(0.33mm2)
24 AWG(0.20mm2)
26 AWG(0.13mm2)
Watts
*Distances are based on a 5% Voltage drop max.● This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved● If dimming with optional 0-10V dimming module, use a dimmer rated for 0-10V operation