ACCREDITATION This Accreditation demonstrates technical competence for a defined scope as detailed in and at locations specified in the annexure to this certificate of the ACCAB's client Calibration Laboratory hereinafter called the Organization. This certificate is for the exclusive use of the Organization and is provided pursuant to the Accreditation Agreement between ACCAB and the Organization. Assumption or Presumption of the applicability of this document is solely drawn by and at the discretion ot'parties who may find this document beneficial. The validity of this certificate is subject to the continued operation of laboratory quality management system maintained by the Organization in compliance to the current version of the standard ISO/IEC 17025 and is monitored by ACCAB through ongoing assessments. The validity of this certificate should be confirmed through the ACCAB website: www.accab.org. D This is not a legal document. Certificate of Accreditation This is to certify that QRICS Calibration Laboratories Pvt. Ltd., has been assessed by ACCAB and meets the requirements of International Standard ISO/IEC 17025:2005 (General requirements for the competence of testing and calibration laboratories) while demonstrating technical competence in the field of Mechanical Quantities Address to which this certificate refers: Location: GP/67, Paras Complex, Office No. 7,8.9 & 10. Thermax Chowk, MIDC, Chinchwad. Pune - 411019 Certificate Issue Date: 22nd October 2013 Certificate Expiry Date: 21" October 2014 Initial Accreditation Date: 22°" October 2013 Re-Accreditation Date: 21" October 2016 Accreditation Commission For Conformity Assessment Bodies Private Limited Suite #114, Level 1, Master Mind IV, Royal Palms, Aarey Colony, Goregaon East, Mumbai - 400 065 India. Tel.-022-28794410,28794411,28794412 URL: www.accab.org E-Mail: [email protected]ACCAB PLATINUM PLUS ISO 17O25 Accredited Calibration Laboratory Certificate No.: ACCAB/IN/CL/1003 Signed for and on behalf of ACCAB Dilip H. Deshmukh Chief Executive Officer
Transcript
ACCREDITATION
This Accreditation demonstrates technicalcompetence for a defined scope as detailed in andat locations specified in the annexure to thiscertificate of the ACCAB's client CalibrationLaboratory hereinafter called the Organization.
This certificate is for the exclusive use of theOrganization and is provided pursuant to theAccreditation Agreement between ACCAB andthe Organization.
Assumption or Presumption of the applicabilityof this document is solely drawn by and at thediscretion ot'parties who may find this documentbeneficial.
The validity of this certificate is subject to thecontinued operation of laboratory quali tymanagement system main ta ined by theOrganization in compliance to the currentversion of the standard ISO/IEC 17025 and ismonitored by ACCAB through ongoingassessments.
The validity of this certificate should beconfirmed through the ACCAB website:www.accab.org.
D This is not a legal document.
Certificate of AccreditationThis is to certify that
QRICS Calibration Laboratories Pvt. Ltd.,has been assessed by ACCAB and meets the requirements of International Standard
ISO/IEC 17025:2005(General requirements for the competence of testing and calibration laboratories)
while demonstrating technical competence in the field of
Mechanical Quantities
Address to which this certificate refers:
Location: GP/67, Paras Complex, Office No. 7,8.9 & 10.Thermax Chowk, MIDC, Chinchwad. Pune - 411019
Certificate Issue Date: 22nd October 2013 Certificate Expiry Date: 21" October 2014
Initial Accreditation Date: 22°" October 2013 Re-Accreditation Date: 21" October 2016
Accreditation Commission For Conformity Assessment Bodies Private LimitedSuite #114, Level 1, Master Mind IV, Royal Palms, Aarey Colony,
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIESSuite # 114, Level 1, Master Mind IV, Royal Palms, Aarey Colony, Goregaon East, Mumbai 400 065, India.
Discipline: Mechanical Quantities Reference No.:Accreditation Standard: ISO / IEC 17025:2005
ACCAB/IN/CL/1003
Certificate Issue Date: 22nd October 2013 Certificate Expiry Date: 21st October 2014Revision No: 00 Revision Date:Sr.No.
1
2
3
Parameter / Deviceunder Calibration
Mass
Weighing balance
Push Pull Meter
Master Equipment Used
Electronic WeighingBalance & Analytical
Weights
Analytical Weights
Analytical Weights
Range of Measurement
1 mg - 200mg
200mg-100g
100g-200g
200g-5kg
Upto 220g
Upto 5 kg
Upto 30 kg
Upto 50 kgf
Not Applicable* Calibration Measurement capability
(±)
0.73
1.13
0.72
mg
mg
mg
6g
0.6mg
1.2 g
0.65 g
144 g
Remarks/Method Used
OIML R 1 1 1 - 1
OIML R 76 - 1
Page 1 of 2 Authorized SignatoryACCAB
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIESSuite # 114, Level 1, Master Mind IV, Royal Palms, Aarey Colony, Goregaon East, Mumbai 400 065, India.
