QUALITY “MADE IN FÜRSTENWALDE“ - Reuther STC · regulation and lighting technology in 1872,...

QUALITY “MADE IN FÜRSTENWALDE“

LIST OF CONTENTS

Contents

PAGE 3-7 INDUSTRIES & PRODUCTS

PAGE 8-9 MATERIALS/PROCESSES/CERTIFICATES

PAGE 10-11 SURFACE TREATMENT

PAGE 12-13 QUALITY MANAGEMENT/TESTING METHODS

PAGE 14-15 ALL-ROUND SERVICE

PAGE 16-18 CAPACITIES/RESOURCES

PAGE 19 REFERENCES

2 3INDUSTRIES & PRODUCTS

Tailored solutions for a variety of industries

FOR RENEWABLE ENERGIES

• Steel tube towers for wind turbines

• Foundation for steel tube towers for wind turbines

FOR PROCESS INDUSTRIES

• Storage tanks

• Apparatus and vessels

INDUSTRIES & PRODUCTS

RENEWABLE ENERGIES

• Steel tube towers for wind turbines

• Foundations for towers

We build steel tube towers – delivering sections with differing

lengths according to requirements, up to a maximum of

35 metres. Our finished products are fully equipped and ready

for assembly – including platforms, access fixtures and electric

installations for connection of the energy generated with the

power grid.

4 5

INDUSTRIES

• Chemicals industry

• Plant engineering and construction

• Energy industry

• Gas processing

• Mineral oil industry

• Hydrogen production

MATERIALS

• Boiler steels

• Fine-grained steels

• Low-alloyed steels

• CrNi steels in separate production facility

DIMENSIONS

• Volumes of up to 500 m³ (larger volumes subject to request)

• Diameter of up to 5.2 m, length of up to 50 m

• Weight of up to 120 t

• Thicknesses of up to 60 mm


PRODUCTS

• Non-pressure apparatus not in acc. with DIN 6600

• Pressure vessels

• Pressure vessels for gases such as hydrogen,

ammonia and other industrial gases

• Autoclaves

• Separators

• Absorbers and adsorbers

• Columns, reactors, heat storage tanks

• Large-scale tanks up to 500 m³

• Facility-produced tanks as per DIN 4119

up to a diameter of 5.2 m

• Non-pressure tanks as per DIN 6608, 6616, 6618

• Double-walled tanks

PROCESS INDUSTRIES


Pioneering apparatus construction – continuing a Brandenburg traditionOur company “Chemie- und Tankanlagenbau REUTHER GmbH” proves that tradition and modernity complement

each other perfectly: Since the Berlin-based industrial pioneer Julius Pintsch laid the foundation stones for gas

regulation and lighting technology in 1872, the company has experienced some turbulent times, repositioned itself

and successfully made its mark on the market. Even today we still feel particularly committed to traditional values

such as quality, reliability and precision. Combining these with modern materials, innovative production technologies

and the first-class expertise of our 180 employees, we now rank amongst the leading companies in the tank and

apparatus construction sector. We regard ourselves as full service providers and suppliers, ensuring support and

assistance from the in-depth consultancy and conception phases to production, finishing and installation, right

through to initial operation and maintenance. Internationally well know companies have come to trust in us as a

competent and valued partner that offers excellent engineering and a personal, all-round service.

6 7INDUSTRIES & PRODUCTS

“Horizontal, cylindrical, double-walled steel tanks on saddle supports with connective lower pipes” is how the German Institute of Structural Engineering (DIBt) refers to this tank unit in its technical inspection permit. The principle is just as simple as it is effective – all the tanks have the same level of liquid due to the lower connection with double-walled pipes.

The two pneumatic valves always open and close simultaneously. They form a closed system with the connective pipes that is permanently monitored for leaks.

The principle behind the lower outlet reduces construction costs in the long term. There is no longer any need to install a leak tub. Mainte-nance costs, e.g. for pumps, and downtimes for repairs can be completely avoided, or at least significantly reduced.

Top-class insights for compelling solutions As a forward-looking company, we are also of course investing in automated and semi-automated processes.

However it is the qualifications of our employees that makes REUTHER so successful, where experience, know-how

and precision come together. Regardless of whether it’s a managing director, construction engineer, welder, sales

engineer, quality manager or trainee apprentice – each of them has its own specialised field and, even more

important, forms a part of our team where all the different skills complement one another. We are particularly proud

of the skilled craftsmanship of our welders.

MATERIALS/PROCESSES/CERTIF ICATES

8 9

PERMITS/CERTIFICATES

• DIN EN ISO 9001:2008

• AD 2000-4PO, TRD 201, DIN EN ISO 3834-2

• Suitability certification for Class E DIN 18800-7

• Specialist company as per para. 19 I

German Water Resources Act (WHG)

• Stahlhochbau (steel structural engineering) seal of approval

• RAL RG 998 certification for tanks as per DIN 6600ff

• UDT Poland / ISCIR Romania

• Pressure tank guideline PED 97/23 EG

• China stamp / ASME stamp

• GOST certificate

• Welding authorisation from Germanischer Lloyd

• PUFO (DK)

MATERIALS/PROCESSES/CERTIF ICATES

STANDARDS

• AD-2000 regulations

• ASME VIII

• API

• GOST and associated standards

WELDING METHODS

• UP

• MAG

• WIG

• SGF

• E-Hand

• Plasma

Treated surfaces for long-lasting products REUTHER has a diverse range of competences to offer in the treatment of surfaces. We manufacture very finely

blasted and polished surfaces, such as those required by the biotechnology sector. We also practice a wide variety

of coating methods that are applied on a daily basis in four different coating facilities. Surface finishes serve amongst

other things as protection against corrosion, thereby contributing greatly to the utility value and durability of our

products. Over the course of the decades we have become particularly specialised in the construction of underground

tanks – much to the benefit of our customers.

SURFACE TREATMENT

10 11SURFACE TREATMENT

OUR SURFACE FINISHING PROCESSES

• Blasting with metallic and mineral abrasives

• Staining and neutralising of CrNi steels

• Bitumen coating

• Epoxy coating

• GFK coating

• Various paints and varnishes

• Rubber coating (in cooperation with specialists)

• PUR coating

• Specialised security coating (Parabeam)

Maximum quality standards throughout the production processQuality does not come about by accident. Rather, it is the result of the high standards we impose on our work.

Before a product leaves our plant, it undergoes various quality assurance measures that accompany the entire

production process at REUTHER. Our quality assurance often goes far beyond the standard testing procedures

stipulated. Our quality management also keeps a close eye on those aspects of the process that are not specified

in any regulation but are nevertheless important. This allows us to correct even the tiniest irregularity with immediate

effect, before it has a chance to become problematic. Our quality management starts right at the offer phase and

continues through to the punctual final delivery. Those who place high standards on themselves can also demand the

same standards from others. That’s why all our suppliers are equally committed to achieving these goals, and fulfil

the criteria as per DIN EN ISO 9001:2008. All testing at REUTHER is carried out both by our internal quality assurance

department and by independent inspection authorities, using the very latest calibrated measuring devices.

QUALITY MANAGEMENT/TESTING METHODS

12 13QUALITY MANAGEMENT/TESTING METHODS

SOME OF OUR KEY TESTING

PROCEDURES AT A GLANCE

• Strength testing

• Leakage testing

• NDT procedures such as ultrasonic and x-ray

• Mechanical testing of tension, folding and bending samples

including production of macro and micro polishes

(in accredited testing laboratories)

• Specialist testing for surface protection,

e.g. testing for coating thickness and pores

• Colour penetrant testing

• Magnetic particle testing

Full service from customer advice through to end product maintenance Customer satisfaction is a top priority for us, so our service certainly does not end with the delivery of our finished

products. We offer you an all-round service that starts with an initial consultation and incorporates everything from

the production and assembly right through to maintenance work. We will gladly coordinate the entire process for

you from the scheduling and final inspection through to annual testing, other safety procedures and handover

of the unit ready for operation, including technical records of all project phases. It also goes without saying that we

are a competent and reliable partner when it comes to the maintenance and repair of your system.

ALL-ROUND SERVICE

14 15ALL-ROUND SERVICE

Ideal resources for major challenges The greater the challenge, the greater the potential for us to demonstrate

the full scale of our capabilities and competence.

Thanks to the resources at our disposal, we can realise even the largest

of commissions with no problem at all.

CAPACITIES/RESOURCES

16 17CAPACITIES/RESOURCES

MODERN, SPACIOUSLY DIMENSIONED

PRODUCTION PLANTS

Our premises span approx. 110,000 sqm, with two production

warehouse complexes equipped with cranes with a total area

of 23,000 sqm, designed for the manufacture of products with

a diameter of up to 5.2 m, a length of up to 50 m and a piece

weight of 120 t. Equipped with technical fittings for carrying out

sophisticated treatment processes including paint spraying and

coating units.

PROFESSIONAL LOGISTICS

Plenty of experience, specialist methods and the ability to act

intuitively and instinctively: This is how we make sure that our

products are delivered to you in exactly the same perfect

quality in which they were produced.

EXCELLENT TRANSPORT LINKS

• By car: 45 minutes from the outskirts of Berlin, A12/E30

motorway between Berlin and Frankfurt/Oder

• By train: conveniently located on the main

East-West European train line

• By ship: nearby port connection on the River Spree

• By aeroplane: the airports Berlin-Tegel,

Berlin-Schönefeld (and in the near future: BBI)

Please visit our homepage for a map showing how to find us:

www.reuther-ctr.de

Real value is found in the detail The thing that makes the difference between a good product and an excellent product is the care that has gone in

to making it, and that is revealed in the details. We measure the quality of our products on the precision work

involved. Our experienced specialists go about their work with the exact kind of passion that is needed for achieving

outstanding results. This includes excellent service that meets all customer requests and makes them feel as though

they are in good hands. We will continue our efforts to become that little bit better every day, ensuring that we meet

the expectations of our customers as best as possible at all times.

CAPACITIES/RESOURCES

18 19REFERENCES

ADM • AFS AVIATION FUEL SERVICES • ALSTOM POWER SYSTEMS • APOYOS METALICOS •

ARAL • ATOFINA • AUTOBAHN TANK & RAST • BABCOCK BORSIG • BALCKE DÜRR • BASF

• BAYER CROPSCIENCE • BAYER MATERIAL SCIENCE • BIS E.M.S. • BITTERFELDER CHLORAL-

KALI • BEWAG • BESSY • BIO ÖLWERK • BP • BSL SCHKOPAU • BUNDESWEHR • CARGILL •

CAC CHEMIEANLAGENBAU CHEMNITZ • C.A.D. PROJEKT • CALORIC ANLAGENBAU • CBR

KÖLN • CIMBRIA SKET • CTA TANK- UND ANLAGENBAU • CONOCOPHILLIPS GERMANY •

DAMKO VENTILTECHNIK • DEWIND • DOW • EDL ANLAGENBAU • EMS INVENTA FISCHER •

EPC ENGINEERING • ESSO • EVONIK INDUSTRIES • FISIA BABCOCK ENVIRONMENT • FLUG-

HAFEN FRANKFURT • FUHRLÄNDER • GAMESA • GEA WIEGAND • GOLDSCHMIDT • HALL-

STEIN • HEAT WÄRMETECHNISCHE ANLAGEN • HKL INDUSTRIEANLAGEN • HOLBORN EURO-

PA RAFFINERIE • HÜTTENWERKE KAISER • INFRACOR • KIEL ENGINEERING • KRUPP UHDE •

LANXESS • LEUNA EPILOX • LEWA SYSTEMS • LINDE ENGINEERING • LINDE GAS • MAHLER

AGS • M.A.L. UMWELTTECHNIK • MAN FERROSTAAL INDUSTRIEANLAGEN • MEHLDAU

UND STEINFATH • MINERALÖLRAFFINERIE DOLLBERGEN • MIRO MINERALÖLRAFFINERIE •

NATO • NOBLEE & THÖRL • NORDEX • NOVO NORDISK • ÖLMÜHLE HAMBURG • ORLEN •

OSCHATZ ANLAGENBAU • OWK UMWELTTECHNIK UND ANLAGENBAU • PCK SCHWEDT •

PÖRNER • PPS PIPELINE SYSTEMS • REINING HEISSKÜHLUNG • REPOWER • ROHE • ROTAN

• RUHR OEL • RWE • SAXS-TANK • SCHIRM AG • SHELL • SILICA VERFAHRENSTECHNIK •

SIPRO • SOLVAY • STRABAG UMWELTTECHNIK • SÜDRAMOL • SUZLON • TECHINT ITALIM-

PIANTI • TECHNIP • TOKHEIM GERMANN • TOTAL • TOYO • UHDE EDELEANU • VESTAS •

VA TECH WABAG • WACKER-CHEMIE • WEHRHAHN • YARA

References for quality „Made in Fürstenwalde“

Calox GmbH · Am Heizwerk 7 · 15517 Fürstenwalde · Tel.: 03361/36360 · Fax: 03361/363650www.calox.de · [email protected]

HEIZUNGS-UND SANITÄRANLAGEN

ELEKTRO- UND REGENANLAGEN

BRENN-,SCHMIER- UND TREIBSTOFFE

3 mal Calox mit 24 Stunden Service

www.international-pc.com

Internationale Farbenwerke GmbH

Lauenburger Landstr. 11D-21039 Börnsen

Tel. : +49 (0) 40720030 Fax : +49 (0) 407208953

www.international-pc.com

Internationale Farbenwerke GmbH

Lauenburger Landstr. 11D-21039 Börnsen

Tel. : +49 (0) 40720030 Fax : +49 (0) 407208953

International Farbenwerke GmbHBereich Korrosionsschutz / Protective CoatingsLauenburger Landstr. 11 · D-21039 BörnsenTel. : +49 (0) 40 720 03-132 · Fax : +49 (0) 40 720 89 53

we know howPower | Chemical | Engineering | Shipyards | Oil & Gas | Projects

www.buhlmann-group.com Germany | Austria | Finland | France | Great Britain | Italy | Netherlands | Russia | Argentina | China | Singapore | Thailand

Buhlmann Rohr-Fittings-Stahlhandel GmbH + Co. KGDresdner Str. 11, 09111 Chemnitz, Germany, Tel.: +49 371 43137-0, Fax: +49 371 4313718, [email protected]

Kompetenz, Qualität und Vielfalt im internationalen Rohrhandel

Die Reuther GmbH und die ÖTEC Group (CTA Anlagenbau GmbH) verbindet aus der Tradition der gleiche Ursprung ihrer Existenz. Das Bindeglied sind komplette Tank-und Verladeanlagen für flüssige und gasförmige Produkte der Rohölverarbeitung. So hat sich die CTA Anlagenbau GmbH folgerichtig als ein stabiler und zuverlässiger Partner für Zubehör, wie Ausrüstungen von Windkrafttürmen, Behältern und Tanks entwickelt. Eine solche solide fachliche Partnerschaft bildet die Grundlage eines stetigen gemeinsamen Erfolges. Ingenieurbüro

• Vorplanung• Genehmigungsplanung• Ausführungsplanung• Konstruktionsunterlagen• Forschung- und Entwicklungsarbeiten

Industrie- und Tankanlagenbau

• Lieferung, Montage und Inbetriebnahme von Anlagen wie • Tankanlagen für brennbare Flüssigkeiten • Heizölversorgungsanlagen • Tankstellen • Flüssiggasanlagen• Service- und Wartungsleistungen an solchen Anlagen

Werkstattfertigung

• Stahl- und Metallbauarbeiten aller Art• Innenausbau von Windkrafttürmen• Tiefzieh- und Stanzarbeiten (Gaszählergehäuse)• Maschinelle Entfettung• Fertigung und Montage von Balkonen und Eingangsüberdachungen• Fertigung von Stadtmöbeln

Group

®

CTA Anlagenbau GmbH • Julius-Pintsch-Ring 18 • D-15517 Fürstenwalde/Spree • Tel.: +49 (0) 3361-3621-0 • Fax: +49 (0) 3361-3621-80 • [email protected] • www.oetec.de

Ingenieurbüro




Werkstattfertigung


Group

®


Ingenieurbüro




Werkstattfertigung


Group

®


Ingenieurbüro




Werkstattfertigung


Group

®


Ingenieurbüro




Werkstattfertigung


Group

®

CTA Anlagenbau GmbH • Julius-Pintsch-Ring 18 • D-15517 Fürstenwalde/Spree • Tel.: +49 (0) 3361-3621-0 • Fax: +49 (0) 3361-3621-80 • [email protected] • www.oetec.deIngenieurbüro




Werkstattfertigung


Group

®


Ingenieurbüro




Werkstattfertigung


Group

®


Ingenieurbüro




Werkstattfertigung


Group

®


Ingenieurbüro




Werkstattfertigung


Group

®


Ingenieurbüro




Werkstattfertigung


Group

®

CTA Anlagenbau GmbH • Julius-Pintsch-Ring 18 • D-15517 Fürstenwalde/Spree • Tel.: +49 (0) 3361-3621-0 • Fax: +49 (0) 3361-3621-80 • [email protected] • www.oetec.deIngenieurbüro




Werkstattfertigung


Group

®


Ingenieurbüro




Werkstattfertigung


Group

®


Ingenieurbüro




Werkstattfertigung


Group

®


Global denken ! Zentral lenken

33511 Multilift DAT5_5131:DAT5_330x1020_5131 15.07.2009 8:20 Uhr Seite 1

Donaustr. 71 · 90451 Nürnberg · Tel: 09 11/9 64 92-05 · Fax: 09 11/9 64 [email protected] · www.multilift.de

CUSTOMERS, SUPPLIERS AND COOPERATION PARTNERS

We would like to take the opportunity to thank our suppliers and cooperation partners who have contributed to the

production of our corporate brochure.

http://www.multilft.de

http://www.calox.de

http://www.international-pc.com

http://www.buhlmann-group.com

http://www.oetec.de

20 21

IN POWER FOR YOUThe main challenge for AH Industries is to support our customers in the wind turbine industry throughout the entire process: planning, development, preparation, adaptation, transport, fitting, support, service!

Our main products are:Tower flanges, nacelle components and lifting equipment/site management.

AH Industries has more than 25 years! experience in the processing of parts weighing up to 100 tonnes with an accuracy of up to one hundredth of a millimetre.

AH Industries A/S, Gl. Skartved 9, DK-6091 Bjert, DenmarkTel: +45 75 57 70 00, Fax: +45 75 57 23 07, www.ah-industries.com

Gül

tig b

is 3

1.12

.201

031

.111

1.111

111

1.1

1.1

1.111

1.11.111

1.11.1111111111

2.2

2222

22

22

2.2

2.2

2.2

22

22

2.2

22

22

22

2.2

2.2

2.2

2.2

2.222

2...201

001

001

001

001

00010100010

010

010

010

010

0100

010010101000010

010

0100

010

010

010101001000

0111010000000G

ültig

bis

http://www.bodenpresswerk.com

www.sgb.de

http://www.ah-industries.com

www.natco.de

projectstrucking

airfreightseafreight

retail & fmcgfairs & exhibitionscustoms brokerage

warehousing & distribution

Natco GmbH Internationale Spedition - Bremen - GermanyPhone +49 (421) 386660 - Mail: [email protected]

www.natco.de

projectstrucking





www.natco.de

projectstrucking





www.natco.de

projectstrucking





www.natco.de

projectstrucking





www.natco.de

projectstrucking





www.natco.de

projectstrucking





www.natco.de

projectstrucking





www.natco

.de

proj

ects

truc

king

airf

reig

htse

afre

ight

reta

il &

fmcg

fair

s &

exh

ibit

ions

cust

oms

brok

erag

e

w

areh

ousi

ng &

dis

trib

utio

n

Nat

co G

mbH

Inte

rnat

iona

le S

pedi

tion

- Bre

men

- G

erm

any

Phon

e +4

9 (4

21) 3

8666

0 - M

ail:

info

@na

tco.

de

www.natco

.de

proj

ects

truc

king

airf

reig

htse

afre

ight

reta

il &

fmcg

fair

s &

exh

ibit

ions

cust

oms

brok

erag

e

w

areh

ousi

ng &

dis

trib

utio

n

Nat

co G

mbH

Inte

rnat

iona

le S

pedi

tion

- Bre

men

- G

erm

any

Phon

e +4

9 (4

21) 3

8666

0 - M

ail:

info

@na

tco.

de

www.natco.de

projectstrucking





www.natco.de

projectstrucking





www.natco.de

projectstrucking





www.natco.de

projectstrucking





www.natco.de

projectstrucking





www.natco.de

projectstrucking





Natco GmbH Internationale Spedition - Bremen - GermanyNatco GmbH Internationale Spedition - Bremen - GermanyNatco GmbH Internationale Spedition - Bremen - GermanyNatco GmbH Internationale Spedition - Bremen - GermanyNatco GmbH Internationale Spedition - Bremen - GermanyNatco GmbH Internationale Spedition - Bremen - GermanyNatco GmbH Internationale Spedition - Bremen - GermanyNatco GmbH Internationale Spedition - Bremen - GermanyNatco GmbH Internationale Spedition - Bremen - GermanyNatco GmbH Internationale Spedition - Bremen - GermanyNatco GmbH Internationale Spedition - Bremen - GermanyNatco GmbH Internationale Spedition - Bremen - GermanyPhone +49 (421) 386660 Phone +49 (421) 386660 Phone +49 (421) 386660 Phone +49 (421) 386660 Phone +49 (421) 386660 · Mail: [email protected] Mail: [email protected] Mail: [email protected] Mail: [email protected]

projects · trucking · airfreight · seafreight retail & fmcg · fairs & exhibitions · customs brokerage


www.natco.de

projectstrucking





www.natco.de

projectstrucking





www.natco.de

projectstrucking





System supplier – Complete range of tower internals

ZARGES Aluminum Systems, LLC600 S. Tyler, Suite 908,Amarillo, TX 79101 · USA Phone: (806) 350-6400Fax: (806) 350-6450

www.zargestubesca.com

ZARGES Aluminium Systeme GmbHZargesstraße 7 · 82362 Weilheim Germany Phone: + 49-(0) 881-687-405Fax: + 49-(0) 881-687-421

00510ZAS_AZ_90x55_RZ.indd 1 12.08.2010 17:25:26 Uhr

Komplette Turmausrüstungs-Systemeaus einer Hand

www.hailo-professional.de

Zijde 41 · 2771 EK BoskoopNetherlandsTel.: +31 (0)1 72 – 21 40 26 Fax: +31 (0)1 72 – 40 46 [email protected]

BodemManramenFonds BombesTrous D‘HommeBödenMannlöcherDished EndsManholes

ELEKTROANLAGENBernd Paul GmbH

E-Mail: [email protected].: +49 3361/344128, Fax: +49 3361/3671017

Ing. Bernd Paul, Trebuser Str. 61, 15517 Fürstenwalde

Elektroinstallation, MSR- u. Ex-Anlagen, Blitzschutzanlagen

















Nordkajen 29, Postbox 294, DK-7100 Vejle Telephone +45 7642 9898, Telefax +45 7642 9880

45-0

1/10

-4c

SLF Oberflächentechnik GmbHGrevener Landstr. 22-24

D-48268 Greven-ReckenfeldTel.: +49(0)2575 97193-0 · Fax: -19

[email protected] · www.slf.eu

Lackier- und Strahltechnik für Großkomponenten

Aufgrund unserer jahrelangen Erfahrungen mit dem Beschich-ten und dem Handling der unterschiedlichsten Werkstücke und Konstruktionen in der Oberflächen technik haben wir ein umfang reiches Produkt-programm zusammengestellt.

Gern erarbeiten wir Ihre individuelle Lösung.

Produktprogramm:

• Lackieranlagen• Vorbehandlungsanlagen• Strahlanlagen• Schwerlast-Fördertechnik • Hubarbeitsbühnen

Fragen Sie die Spezialisten!

www.slf.eu · [email protected]

45-0

1/10

-4c







Produktprogramm:




45-0

1/10

-4c







Produktprogramm:




45-0

1/10

-4c







Produktprogramm:




45-0

1/10

-4c







Produktprogramm:




45-0

1/10

-4c







Produktprogramm:




Schlosserei & Stahlbau Reinmar Klink GmbH

Gewerbeparkring 3515517 Fürstenwalde

Tel.: 03361 - 4831Fax: 03361 - 302715

[email protected] www.schlosserei-klink.de

Schlosserei & StahlbauReinmar Klink GmbH

Balkonanbauten und Geländer

Treppen und Podeste

Türen und Toranlagen

Vordächer und Carports

Sicherheitseinrichtungen und Einbruchschutz

Schliessanlagen für Industrie und Handwerk

Bühnen- und Stahlkonstruktionen

http://www.natco.de

http://www.slf.eu

http://www.zargestubesca.com

http://www.hailo-professional.de

http://www.schlosserei-klink.de

mailto: [email protected]


www.ewe.de

Frischer Wind für erneuerbare EnergienInnovative Offshore-Projekte von EWE

Als zukunftsorientiertes Energieunternehmen setzen wir auf den Ausbau erneuerbarer Energien. Seit Jahren schon leisten wir Pionierarbeit in Sachen Windkraft – betreiben zum Beispiel den ersten deutschen Windpark auf hoher See, alpha ventus. Ein weiterer Offshore-Windpark, RIFFGAT, ist be-reits in Planung. Und das sind nur zwei unserer Projekte für eine Zukunft mit der richtigen Energie.

[email protected]

22 23CUSTOMERS, SUPPLIERS AND COOPERATION PARTNERS

http://www.ewe.de


CONTACT

Chemie- und Tankanlagenbau REUTHER GmbH

Fabrikstrasse 8

D-15517 Fürstenwalde, Germany

Phone +49 (0) 3361 694-0

Fax +49 (0) 3361 694-852

E-mail: [email protected]

www.reuther-ctr.de

Date post:	07-Aug-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

QUALITY “MADE IN FÜRSTENWALDE“ - Reuther STC · regulation and lighting technology in 1872,...

Documents