PLEASE OFFER US ANY SURPLUS MACHINERY YOU HAVE FOR SALE

0161 330 2292www.west-point.co.ukMACHINE TOOLS

★ ★ ★ ★ ★

COLCHESTER TRIUMPH 2000: Gap Bed Centre Lathe. 15" Swing Over Bed. 22" Swing In Gap.50" Distance Between Centres. 2" Spindle Bore. Spindle Speeds 25 - 2000 rpm.10" 3 Jaw Chuck. 12" 4 Jaw Chuck. 21" Face Plate. 14" Face Plate. Drive Plate. 3 Point Steady. QCTP. £9,750

STOCK CARD January 2018

★ QUALITY ★ CUSTOMER CARE ★ SHOWROOM ★ WARRANTY ★ DEMONSTRATED

LAPMASTER Type LM24: Precision Surfacing Lapping Machine.24" Diameter.Year 2009. £7,950

21

2

BINNS & BERRY Model TRIDENT L1000: Gap Bed Centre Lathe. Swing Over Bed 1000mm. Swing Over Saddle 850mm. Swing In Gap 1500mm. Distance Between Centres 7500mm (294").Spindle Bore 104mm (41/8"). Spindle Speeds 4 - 1250rpm. Spindle Nose D1-11 Camlock. Headstock No.6 Morse Taper. Tailstock No.6 Morse Taper. Motor Power 30HP (23Kw). Number of Feeds: 70. Number of Metric Pitches: 80. Number of Inch Pitches: 90. Acu-Rite Wizard Type 411 Digital Readout. Quick Change Toolpost.600mm (24") Diameter 3 Jaw Chuck. 36" (900mm) Diameter 4 Jaw Chuck. 30" & 40" Diameter Face Plates. 300mm Fixed 2 Point Steady. 3 x Fixed 3 Point Steadies: 300mm, 500mm & 780mm Diameter. £44,950

3

3

BINNS & BERRY Model TRIDENT L1000: Gap Bed Centre Lathe. Swing Over Bed 1000mm. Swing Over Saddle 850mm. Swing In Gap 1500mm. Distance Between Centres 7500mm (294").Spindle Bore 104mm (41/8"). Spindle Speeds 4 - 1250rpm. Spindle Nose D1-11 Camlock. Headstock No.6 Morse Taper. Tailstock No.6 Morse Taper. Motor Power 30HP (23Kw). Number of Feeds: 70. Number of Metric Pitches: 80. Number of Inch Pitches: 90. Acu-Rite Wizard Type 411 Digital Readout. Quick Change Toolpost.600mm (24") Diameter 3 Jaw Chuck. 36" (900mm) Diameter 4 Jaw Chuck. 30" & 40" Diameter Face Plates. 300mm Fixed 2 Point Steady. 3 x Fixed 3 Point Steadies: 300mm, 500mm & 780mm Diameter. £44,950

4

BRIDGEPORT Model 1S: Universal Milling Machine.Swivel Vertical Head. Swivel Table Size 42" x 9".Spindle Tapers 40 ISO. Speeds 35 - 1200rpm. £2,750

54

CHESTER: Universal Vertical Milling MachineTable Size 29"x 6". Spindle Taper R8.Manual Feeds to Table. Single Phase. £1,450

AJAX AJRH 1800: Overhead Ram Type Universal Milling Machine.Table Size 1800 x 400mm. X Traverse 1300mm. Spindle Tapers 50 INT.Powered Overarm. Pendant Control. Newall 3 Axis DRO. £9,750

6

HARRISON M300: Centre Lathe. Swing Over Bed 13".Distance Between Centres 25". Spindle Speeds 40 - 2500rpm.Spindle Bore 11/2". 3 Jaw Chuck. QCTP. £2,250

7

BSA Type C6256x1500: Gap Bed Centre Lathe. Swing Over Bed 21". Swing In Gap 27".Distance Between Centres 60". Spindle Bore 3". Taper Turning.3 & 4 Jaw Chucks. 2 and 3 Point Steadies. £4,950

8

5

9

XYZ 1500: Turret Milling Machine.Table Size 42" x 9". Spindle Taper R8.Spindle Speeds 75 - 4200rpm Variable. Ex College. £3,950

11

BRIDGEPORT Model BR2J2: Turret Milling Machine.Table Size 42" x 9". Varispeed Head up to 3750rpm.Spindle Taper R8. Power Feed in X Axis. £4,750

10

XYZ 1500: Turret Milling Machine.Table Size 42" x 9". Spindle Taper R8.Spindle Speeds 75 - 4200rpm Variable. Ex College. £3,950

COLCHESTER TRIUMPH 2500VS: Gap Bed Centre Lathe. Swing Over Bed 400mm.Swing In Gap 585mm. Distance Between Centres 1250mm. Spindle Bore 54mm.Spindle Speeds 0 - 2500rpm Variable. Metric Leadscrew and Dials. 3 & 4 Jaw Chucks. QCTP. £7,750

12

COLCHESTER TRIUMPH 2500VS: Gap Bed Centre Lathe. Swing Over Bed 400mm.Swing In Gap 585mm. Distance Between Centres 1250mm. Spindle Bore 54mm.Spindle Speeds 0 - 2500rpm Variable. Metric Leadscrew and Dials. 3 & 4 Jaw Chucks. QCTP. £6,750

13

6

AJAX Model 1: Universal Milling Machine. Swivel Vertical Head. Table Size 1000mm x 240mm. Spindle Speeds 48 - 1500rpm.Power Feed All Ways. Spindle Taper 40 ISO. Ex.College. £2,750

1514

AJAX Model 1: Universal Milling Machine. Swivel Vertical Head. Table Size 1000mm x 240mm. Spindle Speeds 48 - 1500rpm.Power Feed All Ways. Spindle Taper 40 ISO. Ex.College. £2,750

16

KITCHEN & WALKER Type KWM32-1000: Radial Arm Drill.Radius To Drill 1000mm. 4 Morse Taper. Spindle Speeds 56-2800rpm.Box Table 22"x 22"x 22". £2,950

17

MYFORD SUPER 7: Model Makers Centre Lathe.Swing Over Bed 7". Distance Between Centres 20".Spindle Bore 5/8". 3 & 4 Jaw Chucks. Collet Set. £2,250

MEDDINGS Type DTB: Bench Type Drill.1/2"(13mm) Drilling Capacity. Table 9"x 10".Speeds 500-4000rpm. 3 Phase. £525

20

DRAPER GD16/16C: Bench Type Drill.2 Morse Taper. 16mm Capacity.Speeds 190-2685rpm.Single Phase. £175

OLDAK JUNIOR Model 2: Bench TypeHigh Speed Drill. Table Size 7" x 7".Capacity 1/4" (6.5mm). Single Phase. £425

1918

77

21

POLLARD CORONA Model 130 A/1:Pedestal Drill. No.2 MT. Throat 7 3/4".Speeds 83-1075rpm. Table Size 15"x13". £1,450

FOBCO 10/EIGHT: Pillar Drill.Speeds 51-2650rpm. Table Size 20"x17".No.3 Morse Taper. Throat 10". £1,850

22 23

MEDDINGS Type MF5/3: Pillar Drill.3 Morse Taper (1"). Table 11" x 10".Spindle Speeds 100 - 3000rpm. £1,450

MEDDINGS Type MF5/3: Pillar Drill.3 Morse Taper (1"). Table 11" x 10".Spindle Speeds 100 - 3000rpm. £1,650

24

JONES & SHIPMAN:Toolroom Bench Centres on Steel Stand.Capacity 10" Diameter x 40" Between Centres. £1,400

RJH MORRISFLEX:Horizontal Bench Type Band Facer.9" x 4" Wide Belt. 3 Phase. £525

2726

DRAPER: Tool & Face Lapper.50mm Wide Tool Lapper.200mm Face Lapper. Single Phase. £125

25

8

28

HERBERT: Two Spindle Drill. Table 24" x 15".Spindle 1: 3MT, Power Feed, Speeds 104-562rpm.Spindle 2: 2MT, Speeds 448-2415rpm. £1,650

POLLARD CORONA Type 21AR: Pedestal Drill.Table Size 18" Diameter. Spindle 3MT.Power Feed. Tapping. Speeds 52-722rpm. £1,950

29 30

ELLIOTT No.1: Pillar Drill.Capacity 1/2"(1-13mm). Table 13" x 13".Spindle Speeds 340 - 2580rpm. £875

ELLIOTT PROGRESS No.1: Pedestal Drill.Capacity 1/2"(1-13mm). Table 13" x 13".Spindle Speeds 340 - 2580rpm. £775

31

33

CROWN: Granite Tool Room Surface Table.On Leveling Stand. 48" x 48" Surface Size. £1,250

34

JOHANSSON: Granite Surface Plate.24" x 24" Surface Size.On Steel Stand. £195

32

ELEY METROLOGY: Granite Tool Room Surface Table.1800mm x 1200mm x 200mm Thickness. Fitted to Leveling Base.IS Threaded Clamp Inserts. £1,950

9

36

JONES & SHIPMAN Type 1307 EIU: Universal Cylindrical Toolroom Grinder.Distance Between Centres 40". Swing Over Bed 12". Swivel Workhead.Swivel Wheelhead. Digital Readout. £12,750

35

JONES & SHIPMAN Type 1715/39: Cylindrical Toolroom Grinder.Distance Between Centres 18". Swing Over Bed 8". Swivel Workhead.Swivel Wheelhead. 4 Jaw Chuck. 2 and 3 Point Steadies. £3,250

39

JOHANSSON: Toolroom Granite Surface Plate.48" x 36" Surface Size. On Leveling Stand. £1,250

37

THE SURFACE FLATNESS CO: Pink Granite Surface Table.Surface Size 48" x 36". On Leveling Stand. £1,650

38

STARRETT: Pink Granite Surface Table.Surface Size 48" x 36". On Leveling Stand. Grade A.Last Calibrated 2016 Due Next 2020. £1,400

10

41

OKAMOTO Type 63ST: Surface Grinder. Capacity 600mm x 300mm.Vertical Clearance 205mm. Magnetic Chuck 600mm x 300mm.Grinding Wheel Speed 1500rpm. Coolant. £17,750

40

CLARKSON MK2: Tool and Cutter Grinder. Capacity 12" x 6".With Centres and Universal Holder. Dust Extraction. £1,250

42

CROWN WINDLEY: Granite Tool Room Surface Table.On Leveling Stand. 48" x 48" Surface Size. Grade A+. £1,750

ELEY WARREN: Granite Tool Room Surface Table.On Leveling Stand. 48" x 36" Surface Size. Grade 1. £1,250

4443

Granite Tool Room Surface Table.On Leveling Stand. 48" x 36" Surface Size. £1,450

11

VICTA Type Eagle: Manual Tool Room Surface Grinder.Capacity 10"x 5". Magnetic Chuck. £2,250

45 53

UNION: Heavy Duty Single Wheel Fettling Grinder.Maximum Wheel Diameter 16" x 3". £950

47

EXCEL: Swing Head Surface/Die Grinder.Grinding Wheel Diameter 7".Magnetic Chuck 10" x 5". £950

46

49

WINDLEY BROS: Cast Iron Surface Table.Surface Size 144" x 72". On Steel Base. £4,750

CROWN: Grade B Cast Iron Surface Table.Surface Size 48" x 36". On Steel Base. £1,650

48

12

50

DELAPENA Speedhone EM: Electronic Honing Machine.Spindle Speeds 250-1000rpm Variable. In Process Gauging.Diameter Range 1.5mm-79mm. £3,250

JONES & SHIPMAN Type 540P: Toolroom Surface Grinder.Power Rise & Fall. Capacity 18" x 6". Mag Chuck 18" x 6".Vertical Movement of Head 11". Wheel Speed 3000rpm. £5,750

51 52

JONES & SHIPMAN Type 540: Toolroom Surface Grinder.Capacity 18" x 6". Vertical Movement of Head 11".Mag Chuck 18" x 6". Wheel Speed 3000rpm. £4,250

53

Tool Room Segmented Cast Iron Surface Table.In Three Sections. Can Be Bolted Together. Each Section 70"x 50". Overall Size 150"x 70" OR 210" x 50". £4,750

54

JONES & SHIPMAN Type 540: Toolroom Surface Grinder.Capacity 18" x 6". Vertical Movement of Head 11".Mag Chuck 18" x 6". Wheel Speed 3000rpm. £4,250

DORMER Model 108: Drill Grinding Machine.Fitted To Dust Extraction Unit. Capacity 0 - 11/2". £1,650

55 56

BODMER TAUMEL Type 80: Touch Control Riveting Machine.Foot Control. £3,750

58

CARTERS SALFORD: Blacksmiths Anvil On Stand.Surface Size 24"x 6". £850

RIDGID Type 535: Pipe Threading Machine on Mobile Stand.Capacity 2".Single Phase. £825

5957

MAGNABEND 1250E: Electromagnetic Sheet Metal Folder.Capacity 48" x 16swg (1200mm x 1.6mm). £950

13

14

60

SAGITA BEYELA Type 75-2000: Downstroke Hydraulic Press Brake.Capacity 75Ton x 2000mm. Distance Between Side Frame's 1570mm.Guard Scan Light Guards. £7,950

F.J.EDWARDS: Manual Box & Pan Folding Machine.Capacity 48" x 14swg (1200mm x 2.0mm).Full Set of 12 Clamps. Max Folding Angle 135o. £2,250

61

EDWARDS PEARSON Type DD: Power Guillotine. Capacity 2040mm x 3.5mm. Manual Back Gauge.Front Supports and Squaring Arm. Blade Gap Adjustment. £5,250

62 63

EDWARDS PEARSON Type DD: Power Guillotine. Capacity 1270mm x 2.5mm (50" x 10swg). Manual Back Gauge.Front Supports and Squaring Arm. Ex. University. £5,750

15

119112

PIERCE ALL: Sheet Metal Corner Notcher.Capacity 200mm (8") x 4mm (8swg). £1,450

65

BAILEIGH Type BB-7212: Manual Box & Pan Folding Machine.Capacity 80" x 12swg (2040mm x 2.8mm). Max Folding Angle 135o.Maximum Beam Lift 1". Maximum Box Depth 6". £2,750

64

66

EDWARDS PEARSON Type DD: Power Guillotine. Capacity 1270mm x 2.5mm (50" x 10swg). Manual Back Gauge.Front Supports and Squaring Arm. £5,250

EDWARDS PEARSON Type DD: Power Guillotine. Capacity 2540mm x 3.5mm. Power Back Gauge.Front Supports and Squaring Arm. Blade Gap Adjustment. £6,750

67

16

68

ARCHDALE: Radial Arm Drill. Radius of Arm 54" (4'6").Spindle Taper No.5 Morse (3" Capacity). Spindle Speeds 32 - 800rpm.Telescopic DC Safety Brake. £3,750

69

WEBSTER & BENNETT Type 36" EH: Elevating Rail Vertical Boring Machine.48" Diameter Swing. 42" Diameter Table. 40" Cross Travel.Table to Underside of Ram 40" Max. Turret Travel 34". Speeds: 9 - 200rpm. £9,250

70 71

17

HCP Type 60/2: Radial Arm Drill. Radius of Arm 84" (7ft).Maximum Distance from Spindle to Base 72" (6ft). Spindle Taper No.5 Morse.Spindle Speeds 30 - 1700rpm. Power Locking. Telescopic DC Safety Brake. £6,950

JOHN MILLS: 80 Ton C Frame Hydraulic Power Press. Throat 17".Daylight With Table On 31". Daylight With Table Off 60". £3,950

18

72

JONES & SHIPMAN: Bench Type Geared Arbor Press.Distance Between Uprights 20". Daylight 24".On Steel Stand. £1,650

JONES & SHIPMAN: Bench Type Geared Arbor Press.Distance Between Uprights 20". Daylight 24".On Steel Stand. £1,250

73 74

JONES & SHIPMAN: Bench Type Geared Arbor Press.Distance Between Uprights 20". Daylight 24".On Steel Stand. £950

76

A.S.STUTTGART: Manual Sheet MetalSwaging Machine.Throat 51/2". £125

75

CMZ No.6: Manual Sheet MetalSwaging Machine. £750

DENBIGH No4: Fly Press.Throat 4 1/2". Daylight 7". £475

78

NORTON No.2: Fly Press.

£275

77

19

NORTON No6A: Heavy Duty Fly Press.Throat 12". Daylight 8 3/4". Fitted to Steel Stand.With Various Punches & Dies. £1,450

79 80

NORTON No6DB: Heavy Duty Fly Press.Throat 12". Daylight 8 3/4". Fitted to Steel Stand.With Various Punches & Dies. £1,250

81 82

NORTON No4: Fly Press.Throat 5". Daylight 7".Fitted to Steel Stand. £475

NORTON No5: Fly Press.Throat 5 1/2". Daylight 8".Fitted to Steel Stand. £625

DENBIGH No.5T: Tall Fly Press.Throat 6". Daylight 12". £675

86

HAZELWOOD & DENT No.5: Fly Press.Throat 5 1/2". Daylight 8". £575

85

SWEENEY & BLOCKSIDGE: Deep Throated Fly Press. Throat 10 1/2". Daylight 8 1/2". £775

84

HAZELWOOD & DENT No.5: Fly Press.Throat 5 1/2". Daylight 8". £575

83

20

FROMAG Type Rapida 63/425: Keyseating Machine. Keyway Width Min 0.118" - 2.48". Bore Diameter 0.512 -16".Maximum Length of Keyway 16.73". Maximum Stroke of Machine 17.5". Maximum Cutting Pull 3Mp.Maximum Weight of Workpiece: 6 Tons. Cutting Speed 6.5 - 72ft/min. Table Size 13.77" x 19.68". Various Tooling. £6,950

87

LAPMASTER Type 36: Surface Lapping Machine.With 6 Lapping Rings. £5,950

88

90

Bench Type Punch & Die Grinder.Magnetic Chuck 120mm. 3 Jaw Chuck 120mm.Single Phase. £750

MORGAN RUSHWORTH Type MPR2500.10: Powered Pyramid Rolls.Capacity: 2500mm x 10mm (100" x 3/8").Top Rolls Size 250mm (10") Diameter. Bottom Rolls Size 200mm (8") Diameter. £8,250

89

21

91

FAMI: Sliding 12 Drawer Storage System.12 x 1330mm Wide x 50mm High Sliding Drawers.Outside Dimensions: 1430mm x 720mm x 1000mm H. £950

92 93

MANDRIAN Type RPS/15A: Pedestal Sheet Metal Spot Welding Machine.Capacity 15KVA. Throat 18". £1,250

BARASPOT: Sheet Metal Spot Welding Machine.16 KVA. Throat 15". £950

95

POWER CRAFT Type PFZ-400R:Fretwork Saw. Throat Size 400mm.Single Phase. £125

94

JKO Type BSP160:Bench Type Laminate Saw.Single Phase. £175

DENFORD NOVAMILL: CNC Vertical Milling Machine. Table Size 400mm x 100mm.On Mobile Bench. Single Phase. £1,250

96 97

DENFORD Microrouter Compact: CNC RoutingMachine. Platten Size 400mm x 200mm. 23,000rpm Routing Head. Single Phase. £1,250

F.J.EDWARDS: Manual Initial Pinch Sheet Metal Bending Rolls.Capacity 72" x 43/4" Diameter Roll. £1,650

103

22

100

KINGSLAND Type W3: Treadle OperatedCorner Notcher. Capacity 3"x 3". £475

TETROC: 20 Ton Hydraulic Heavy Duty Gantry Style Bearing Press.Between Uprights 251/2". Daylight 33". Tonnage 4000PSI/300 Bar.Ram Diameter 21/2". Stroke 18". Roller Type Carriage. £1,650

98

C30H: Garage Press. 30 Ton Capacity.Distance Between Uprights 29". Daylight 40" £950

99

STENZEL MATRA: Bench Type Arbor Press.Stroke 12". Throat 51/2". Daylight 133/4". £125

101 102

Bench Type Arbor Press.Stroke 300mm. Throat 115mm. Daylight 300mm. £125

23

KINGSLAND Type 55XS: 55 Ton Hydraulic Universal Iron Worker.Punching 32mm x 13mm. Shearing 230mm x 20mm.Angles at 90 Degrees 130mm x 13mm. Section 45mm. £4,750

106105104

CMZ Model 7R: Powered Swaging Machine.Throat 12". £1,850

RASCAMAT Model 500: Pneumatic Articulated Tapping Arm. Modul-R. Modul-I. 2xModul-V M6.Modul-II M14. Modul-III M10.Modul-IV M8. £2,250

107

WALTONS: Manual Initial Pinch Sheet Metal Bending Rolls.Capacity 1000mm x 50mm Diameter Roll. £950

PRESS & SHEAR: Manual Initial Pinch Sheet Metal Bending Rolls.Capacity 1000mm x 50mm Diameter Roll. £850

108 109

INDENTEC: Bench Type Hardness Tester.With Anvils and Tooling. £1,150

24

STARTRITE Type 316: Variable Speed Vertical Bandsaw.Throat 36". Daylight 16". Front Tee Slotted Table 28" x 16".Rear Table 22" x 13". Blade Welder. £2,950

111

AXEMINSTER Type BS400N: Vertical Bandsaw.Throat 15". Daylight 12".Table Size 21" x 19". £725

112

114

MILLER INVISION: 354 Amp Mig Welding Set. With Miller 20 Series 24Volt Wire Feeder. £675

113

MILLER INVISION: 354 Amp Mig Welding Set. With Miller 20 Series 24Volt Wire Feeder. £675

116

MILLER Type DYNASTY 200DX:200 Amp Tig Welding Set. £725

115

MUREX Model 191 Tradesmig:191 Amp Mig Welding Set.3 Phase. £450

MIDSAW: Heavy Duty Vertical Bandsaw.Table Size 48" x 36". Throat 35". Daylight 231/2".With Blade Welder. £1,500

110

25

120

BOC LYNXPAK: 200 Amp Mig Welding Set.Capacity 200 Amp at 65%. Capacity 160 Amp at 100%.3 Phase. £325

119

HYPERTHERM POWERMAX 380: Plasma Cutting System. Maximum Capacity 10mm. 17 Amp 87V at 100%.21 Amp 88V at 60%. 27 Amp 92V at 35%. £675

QUALTERS & SMITH Type 260 Sawmaster: Automatic Horizontal Bandsaw.Capacity 260mm Round. Variable Speed. £1,750

121

117

STARTRITE Type 316H: Variable Speed Vertical Bandsaw.Throat 36". Daylight 16". Hydraulic Front Tee Slotted Table 28" x 16".Rear Table 22" x 13". Blade Welder. £1,900

MEGA Type BS-1830: Semi Automatic Horizontal Bandsaw.Round Bar: 460mm. @ 90 Degrees 760mm x 460mm. @ 45 Degrees 410mm x 460mm.Flat Bar 760mm x 460mm. Flat Bar @ 45o 410mm x 460mm. Motor Size: 7.5HP. Year 2008. £9,750

118

TEE SLOTTED CAST IRON BED PLATE: 96" x 43" x 6" Deep. 3 Tee Slots. (2 Available).Tee Slots: 2" Width of Throat x 11/2" Depth of Throat. 31/8" Width of Headspace x 11/2" Depth of Headspace. £2,250

TEE SLOTTED CAST IRON BED PLATE: 72" x 72" x 12" Thickness.11 x Tee Slots. £1,800

26

123

PEARSON: Hydraulic Guillotine.Capacity 8' (96") x 1/2"(12.5mm). £8,250

122

PEARSON: Hydraulic Down Stroke Press Brake.Capacity 10'1" (121") x 70 Tons. £9,750

124 125

27

126

ABA-WERK Type ABA FF 1000/50: Tool Room Surface Grinder. Capacity 1050mm x 500mm.Max Height of Work Piece with New Wheel 550mm.Electro Magnetic Chuck 1000 x 400mm. £18,750

MORGAN 10mm x 2500mm Power Bending RollsUNION JUBILEE Double Ended GrinderBRIDGEPORT 2HP Varispeed Turret Mill

JONES & SHIPMAN 540P Surface GrinderCast Iron Tee Slotted Bed Plate 8' x 5'

KRV 3000 Turret Milling MachineSteel Welding Table 10ft x 6ft

MORGAN RUSHWORTH Manual Box & Pan FolderCOLCHESTER Magnum 1250 Centre LatheBRIDGEPORT J Type Turret Milling MachineInitial Pinch 80" Sheet Metal Bending RollsPEDRAZZOLI MEC BROWN 75 Cut Off SawCOLCHESTER Triumph 2000 Centre Lathe

GATE MILFORD Double Ended Grinder

MACHINERY ARRIVING SOONMEDDINGS MF4 Pillar Drill

NORTON No.5 Fly Press on StandHARRISON M300 Centre Lathe

Manual Sheet Metal Bending Rolls 50" x 2" Dia.COLCHESTER Student Gap Bed Centre Lathe

JONES & SHIPMAN 1400 Surface GrinderXYZ 1400 Gap Bed Cantre Lathe

28

WORK SURFACES:Benches can be supplied with either 45mm 'Wooden Top''Galvanised Steel Top' or both for heavy duty.

NEW WORK BENCH Model 1260SC: Galvanised Top and Single Cupboard.1200mm Length x 600mm Depth. (Timber not Included) £345

Each bench includes one cupboard as standard. Extra cupboards are Available:Single Cupboard £855 Drawer Cupboard Unit £250

Bench Vices are available and can be fitted or supplied seperately:4"(100mm) £855" (125mm) £1056" (150mm) £1308" (200mm) £160

Extra's are available including:Single Drawer £85Twin 13A Socket Unit £50Flourescent Light Fitting £75

NEW WORK BENCH Model 2075WSC: 45mm Timber with Galvanised Top, Two Cupboards, Draw and 6" Vice.2000mm Length x 750mm Depth. £845

PORTABLE:Certain model benches can be supplied with wheels at one end or made fully mobile with a lowering undercarriage.

COLOUR:Benches are available in a variety of colours includingBlue, Red, Green, Black, White, Silver, Light Grey & Anthracite.

NEW WORK BENCH Model 2075WSC: 45mm Timber with Galvanised Top and Single Cupboard. 2000mm Length x 750mm Depth. Vice not Included. (For 6" Vice add £130) £545

29

WEST POINT MACHINE TOOLS are now selling new bandsaws from PEGAS Gonda in the Czech Republic. We can offer manual, semi-automatic, fully-automatic & CNC machinesranging from 150mm through to 1200mm Diameter. For more information contact quality@west-point.co.uk or call our dedicated sales team on 0161-330-2292.

(NEW) PEGAS 360x500 SHI-LR: Semi-Automatic Horizontal Bandsaw.Capacity Round: Tube 360mm, Solid 250mm. Rectangular 500x360mm.Double Mitre up to 60 Degrees Both Ways. Blade Speeds: 20 to 100 M/Min. £12,464

128

(NEW) PEGAS 250x315 GH-LR: Gravitational Horizontal Bandsaw. Capacity Round 250mm, Rectangular 290x200mm.Double Mitre. Manual Hydraulic Downfeed. £4,532

127

30

131

PEDRAZZOLI Super Brown 351-60MRM:Pull Down Cut Off Saw. Capacity Round 115mm,Square 95mm. Variable Speed. Double Mitre. £4,150

129

133

RIDGID: Tristand Chain Vices. Various Sizes Available. Ranging from 1/8"-2" to 1/8"-12" Capacity. Prices Ranging from: £425 - £795

BAILEIGH Model PT-44: CNC Plasma Table. Cutting Area 1220 x 1220 mm.Main Frame Supports upto 25mm Thick Mild Steel. Industrial Down Draft Table.Easy Software. 240Volt. Various Cutting Systems Available at Extra Cost. £7,950

134132

RIDGID Type 1224: Power Threading Machine.Pipe Capacity 1/4"-2" @ 36 RPM, 2-1/2"-4" @ 12 RPM.Bolt Cpacity 1/4"-2". Reverse/Forward. 2 Speed Gearbox. £6,750

PEGAS 300x320 GH-LR: Gravitational Horizontal Bandsaw.Capacity Round 300mm, Rectangular 320x300mm.Double Mitre. Manual Hydraulic Downfeed. £6,515

NEWNEW

NEW

GEKA HYDRACROP 55/110-S: Hydraulic Ironworker. Punching 55Ton.Shearing 110Ton. Punching: 40mm x 10 mm. Throat Depth 250mm.Shearing 300mm x 15 mm. Section: 40 mm Round/Sqaure. £12,995

NEW

NEW130

NEW

NEW

NEW

31

135

137

FLAMEFAST Model DS 430S: Combined Ceramic Chip Forge and Brazing Hearth with Fail-Safe Controls and Varivac Hood.Size 1040mm X 550mm X 1800mm High. £4,250

KRAFT MULLER: 6 Drawer Mobile Tool Cabinet Complete with ToolsIncludes Spanners, Ratchets Sets and Sockets, Screwdrivers, Pliers, Allen Keys, etc. Side Compartment. Locking System. Net Weight 72KG. £650

NEW

NEW

CEA: Pedestal Sheet Metal Spot Welding Machine.Capacity 20KVA. Throat 450mm. £3,950

NEW136

32

WEST POINT MACHINE TOOLS are now selling new machinery from BAILEIGH Industrial. We can offer a full range of machinery for both Engineering and Fabrication processes.All machinery has a 12 month warranty. Transport and Training can be arranged.

For more information contact quality@west-point.co.uk or call our dedicated sales team on 0161-330-2292.

BAILEIGH BG-679: Horizontal Belt Sander.Dust Collection System. 6" Belt Width.3 Grinding Stations. 4 HP Motor. 3 Phase. £1,295

BAILEIGH CM-10P: Portable Plate Beveler with Bench Mount.Chamfer at 90o 0-7mm. Chamfer at 45o 0-10mm.Indexed Blade. 1HP Brushless Motor. Single Phase. £725

BAILEIGH CM-15DS: Portable Plate Beveler. Automatic Feeding.Maximum Bevel Width 15mm. Material Thickness 6-40mm.Bevel Angle 15o-50o Variable. 3 Phase. £5,495

140139138

33

BAILEIGH VM-949: Vertical Turret Milling Machine. Spindle Taper 40 ISO.Table Size 49"x 9". X Travel 281/2". Spindle Speeds 60-4200rpm Variable. Power Feed on all Axis. Power Drawbar. 2 Axis DRO. 3HP Motor. £13,950

143141

BAILEIGH RDB-175: Rotary Draw Bender. Bends upto 180o.Foot Pedal Operation. Min OD 6mm. Max Tube 64mm x 4mm.Uses Standard Baileigh Drop On Die Sets. Single Phase. £5,995

142

BAILEIGH HSP-50A: Pneumatic Workshop Press. 45 Ton Capacity.70mm Piston Head Dia. 200mm Cylinder Stroke. Table Winch.Foot Pedal Control. Auto Piston Return. Vee Blocks. £1,325

BAILEIGH PL-1860E: Gap Bed Centre Lathe. Swing Over Bed 14". Swing Over Cross Slide 81/2". Swing In Gap 27".Distance Between Centres 60". Spindle Bore 21/4". Spindle Speeds 25-2000rpm. 3 Jaw Chuck. 4 Jaw Chuck. Coolant. Digital Readout. Quick Change Toolpost. 71/2HP Motor. £11,250

145144

BAILEIGH PR-413: Powered Initial Pinch Rolls. Forming Width 48"(1300mm).Capacity Mild Steel 7/8"(95mm). 3 Driven Rolls. Manual Pinch. Hydraulic Rear Roll.Roll Speed 3.6mpm. Wire Grooves. 11/2HP Motor. Single Phase. £8,450

D'ANDREA Type T100:Universal Boring & Facing Head. £775

149

RACK VICE: On Swivel Base.81/2" Jaws. 91/2" Opening. £225

RACK VICE:6" Jaws. 91/2" Opening. £225

RACK VICE:6" Jaws. 13" Opening. £275

152151150

34

MARLCO: Keyway Broach Set.5/16", 3/8", 7/8", 1/2" & 9/16". £525

FIBRO PNEUMATIC PCD: Auto IndexingDrilling Table. 12" Diameter. £650

154 155153

JONES & SHIPMAN: Vertical & Horizontal Rotary Table with Dividing. 12" Diameter. £850

156

HD RACK VICE ON SWIVEL BASE:6" Jaws. 11" Opening. 11/2" Jaw Depth. £225

ACETI Type ART.40: Portable Pneumatic Chamfering Machine. Capacity 0-3mm. £275

148

ESSEX TOOL & GAUGE LTD: Tee Slotted SineTable. 300mm x 200mm x 90mm High. £375

146 147

CROWN: Tee Slotted Two Way Sine Table.Size 300mm x 200mm x 130mm High. £475

WOHLHAUPER UPA4/13015: Universal Boring& Facing Head. 4MT. 14mm Thread. £975

157

Tee Slotted Cube. 5 Tee Slots on Surface.Size: 24" x 18" x 15"H. £750

165 166

Tee Slotted Angle Plate. 4 Tee Slots on Surface.Size: 22" x 18" x 13"Deep. £625

167

Tee Slotted Angle Plate. 3 Tee Slots on Surface.Size: 20" x 18" x 13"Deep. £625

SIP L Type Tooling Set: 2 Morse Taper.Boring Heads, Drill Chuck, Optics, etc. £950

SIP L Type Tooling Set: 4 Morse Taper.Boring Heads, Drill Chuck, Optics, etc. £1,250

SIP L Type Tooling Set: 4 Morse Taper.Boring Heads, Drill Chuck, Optics, etc. £1,250

160159158

SIP Type PD-6H Rotoptic: Tee Slotted Power Rotary Table.800mm Diameter. Working Height 225mm. £1,650

SIP Type PD-5: Tee Slotted Rotary Table.600mm Diameter. Working Height 175mm. £950

162161

35

164

Heavy Duty 3 Point Steady:20" Diameter. 20" Centre Height. £2,250

ENGINEERS: Rotating Co-orindate Table. Table Size 23 3/4" x 9 1/2". Travel 7 1/2". £650

163

West Point Machine ToolsFromac Works, Junction Street, Hyde, Cheshire. England SK14 4QN

Tel: +44 (0)161 330 2292 • Fax: +44 (0)161 330 2293E-mail Sales: steve@west-point.co.uk • E-mail General: quality@west-point.co.uk

THE MOST GENUINE MACHINE TOOL COMPANY IN THE WORLD - “PROBABLY”

EZIO PENSOTI: Swivel Head Toolroom Slotting Machine.Maximum Stroke 14". Table Diameter 23". Throat 23". £7,950

169

PLEASE OFFER US ANY SURPLUS MACHINERY YOU HAVE FOR SALE

DEVLIEG Type 2B36: Jigmil Horizontal Drilling, Milling and Boring Machine.Table Size 36"x 24". Spindle Taper 40 ISO. Spindle Speeds 24-2000rpm.Heidenhain CNC Control. Air Lift Rotary Tee Slotted Table. £12,950

168