Quality Pipe Supports Catalogue

Click your selection!!Product CatalogueProduct Catalogue

lCompany Introduction

lCatalogue Index

Quality Pipe Supports(Q.P.S.) LtdUnit 1,Dyffryn Industrial Estate,Newtown, Powys,SY16 3BDTel : +44(01686)629898Fax : +44(01686)629797e-mail :[email protected]

or click here to visitour web site....www.qps.co.uk

www.qps.co.uk

The Company name gives an insight into the motivation behind the management policy. QUALITYPIPE SUPPORTS are specialists in the design and manufacture of pipe support systems andfabricated steelwork with total quality being foremost in the Company policy, mindful of goodmanagement, and using efficient production techniques, QUALITY PIPE SUPPORTS can supply thepetro-chemical, offshore, nuclear and water industry with a quality product at the right price.The company, with senior personnel having over 50 years experience in pipe suspension equipment,offer a wide range including:1. VARIABLE SPRING SUPPORTS2. CONSTANT SPRING SUPPORTS3. ANCILLARY EQUIPMENT (INCLUDING PIPE CLAMPS, “U” BOLTS, RODS, ETC.)4. BRITISH STANDARD ANCILLARY EQUIPMENT5. ASSOCIATED STEELWORK FABRICATIONS6. SITE SURVEYS AND INSPECTIONS7. DESIGN AND DETAILING FACILITIES.

QUALITY PIPE SUPPORTS can handle large or small contracts using experienced engineers to givefull support to all requirements, being design or practical advice. Where required we offer acomprehensive site survey service for new and existing pipe supports.

QUALITY ASSURANCEQUALITY PIPE SUPPORTS documented Quality Assurance manual and procedures comply to therequirement of ISO 9001. These procedures are operated to in all areas of QUALITY PIPESUPPORTS.When requested QUALITY PIPE SUPPORTS will supply an individual Quality plan for any specificcontract.‘Life-Time’ records giving full details of procedures, materials, welds, welders, etc. can be suppliedwhen requested.All incoming raw material is subject to strict inspection and full chemical and mechanical testcertification is a standard requirement.

MATERIALAll structural fabrications and component parts are manufactured from high quality carbon steel, alloysteel and stainless steel.

WELDINGAll weld materials are covered by full certification. Only approved qualified welders are used byQUALITY PIPE SUPPORTS. All welding is undertaken against approved weld procedures.

SURFACE FINISHESA large range of surface finishes are available from QUALITY PIPE SUPPORTS. Where a specificpaint finish is required due to the environment, QUALITY PIPE SUPPORTS will supply a paintingQuality plan.Standard finishes include:Zinc electro plating (BS 3382)Hot dip galvanizing (ISO 1461) 1999Sheradising (BS 4921)Shot blasting (SA 2.5)Plastic coating

SITE SURVEYS AND INSPECTIONOur engineers are experienced in site surveys of pipework and support systems. This can coverexisting pipe supports or proposed pipe supports. A fully documented report showing findings andrecommendations would be prepared.

FURTHER INFORMATIONOur technical sales engineers are always available to help with your specific requirements and/or givepractical advice to your project. For further copies of our catalogues please call +44(01686) 629898 orFax: +44(01686) 629797.

N.B. QUALITY PIPE SUPPORTS RESERVE THE RIGHT TO ALTER SPECIFICATIONS WITHOUT NOTICE.

INTRODUCTION

Page 1

INTRODUCTION

Page 2

Quality Pipe Supports (Q.P.S) Ltd, offer a wide range ofservices, from professional technical advice, to complete pipesupport design. Our highly experienced design engineers can offercomprehensive pipe support “Site Surveys”, of which include acomplete analysis of new and as built piping systems. Togetherwith our “Review Reality” software, support designs come to life,giving an in depth representation to project reviews.

Quality Pipe Supports (Q.P.S) Ltd, also offer completegeneration of individual supports, and individual support drawings.AUTOCAD LT allows for individual customer specification,providing the opportunity for complete customization of pipesupports.

Services

Comprehensive pipe support surveys

Stress analysis for piping systems

Pipe support design for piping systems

Software generated individual support drawings(AutoCAD LT)

In depth representation of pipe support designs(Review Reality Viewer)

Please contact us for further details.

Through our highly constant quality of products, Q.P.S can ensurecomplete customer satisfaction. With thanks to our highly efficientservice and skilled team of sales engineers, Q.P.S will continue toprovide pipe supports which are second to none.

QUALITY PIPE SUPPORTS (Q.P.S) LTDQUALITY COMES FIRST...

DESIGN CAPABILITIES

Page 3

8 Interactive plant model visualisation8 Shows lifelike realism to project reviews8 Model file import capabilities8 Extreme texturing & Anti-Aliasing8 Software generated shadows8 Generates complex animations

8 Eliminates drawings& plastic models

8 Cost & projecttime savings

8 Improved project communication

Features...Features...

Benefits...Benefits...

Quality Pipe Supports (Q.P.S) Ltd have introduced the latest 3D photorealisticimaging viewer, from Cadcentre’s “Review Reality” plant viewing software. Theprogram itself boasts complex animation sequencing, and gives an in-depthrepresentation of the dynamic views which would normally only be found on-site. Theviewer itself can read both “PDMS” and “PDS” generated software files, and has nolimits dealing with project size or complexity. The program brings to life what wouldnormally be viewed on paper, and transforms it into a fully functional, threedimensional atmosphere. Thus allowing our experienced team of pipe support designengineers to precisely plan and simulate working supports. Reviewing the projectallows us to optimise our design before any fabrication has begun. Therefore makingsignificant savings in cost and time.

Pipe support design is usually based oninformation which is supplied via the client,such as:Plant details / Civil drawingsPipe layout IsometricsPipework SpecificationsHowever, thanks to “Review Reality”, theonly information needed to view an entireplant can be stored on a single CD!

Advantages...Advantages...

For more informationplease don’t hesitateto contact us at,Unit 1, Dyffryn Ind. Estate,Newtown, Powys,SY16 3BD.Tel +44(0)1686 629898Fax+44(0)1686 [email protected]

Click your selection.

Page 4

Section 1Constant Spring Hangers

Section 2Ancillary Equipment

Section 3Variable Spring Hangers

Section 4BS 3974 Equipment

Section 5Fabricated Steelwork

Section 6Isolation Equipment

Section 8Lindapters

Section 7Unistrut

Section 9 Staircases,Walkways & Balustrading

Constant SpringSupports

Section 1

DESCRIPTION

Page 5

Design Principle

The Quality Constant Support is designed to allow the supported pipework to expandvertically upwards or downwards, whilst maintaining a constant supporting effortthroughout the travel range.

This is achieved by transferring the load of the supported pipework to the coiled com-pression spring via a cranked load arm. As the load arm moves through its travel rangethe resulting moments of the pipework load and spring, about the main pivot shaft areperfectly counterbalanced.

Construction

The Quality Constant Support units are robustly constructed, with various arrangementsfor attachment to pipework and supporting steelwork. All materials have been selectedto provide a high safety factor. The spring is housed in a casing to prevent the ingress offoreign bodies which would jeopardize smooth operation.

Model Range

The Quality Constant Supports are available in a range of six different models, compris-ing Horizontal, Vertical and Base Mounted units. These accommodate a maximum of 66different sizes catering for loads ranging from 10kg up to 31,500kgs with travels from40mm up to 410mm. Longer travels are available (see Selection Tables).

Specials

Although the standard range of Quality Constant Supports will cater for most design con-ditions, we can provide specials for greater loads or travels.

Presetting

All Quality Constant Supports are supplied to site in the preset position – removable pre-set pins are fitted, locking the load arm in the correct position for connecting to thepipework in its cold condition.

Hydrostatic Test Loads

All Quality Constant Support units are capable of supporting pipework that can be sub-jected to hydrostatic test loads of up to two times the working load of the unit.

SELECTION PROCEDURE

Page 6

To select a Quality constant support, the weight of the pipework to be supported (LOAD)and the vertical movement up or down through expansion of the pipework (ACTUALTRAVEL) is calculated. Because practical movement, can deviate from the calculatedmovement, it is important to allow for overtravel. Generally we recommend that 25mm isadded to ACTUAL TRAVELS up to 125mm of movement, and 20% is added for travelsover 125mm. This figure is then rounded up to the nearest 10mm to provide the TOTALTRAVEL which can then be matched with that given in the selection tables.

Selection of the correct spring size is made by referring to the selection tables (Kg or Kn).Using the total travel along the top of the chart, read down the column until the requiredload is found, or the nearest greater load. The correct size of spring is found by readinghorizontally along the row to the left of this load.

When selecting model Fig QC110, only loads from the right hand side of the thick linecan be chosen.

When ordering the following information is required

• QUANTITY REQUIRED

• MODEL TYPE (e.g. FIG QC100B)

• CONSTANT UNIT SIZE

• WORKING LOAD IN Kg OR Kn

• HYDROSTATIC TEST LOAD

• ACTUAL TRAVEL (mm)

• TOTAL TRAVEL (mm)

• DIRECTION OF TRAVEL FROM COLD TO HOT (UP OR DOWN)

• FINISH REQUIRED

QUALITY CONSTANT SUPPORTS – MODEL RANGE

Page 7

QUALITY CONSTANT SUPPORT SELECTION TABLE

Page 8

ConstantSpring TOTAL TRAVEL IN MILLIMETRESSize

420 430 440 450 460 470 480 490 500 510 520 530 540 550 560 570 580 590 600 610

40 1850 1805 1765 1725 1690 1650 1620 1585 1555 1525 1495 1465 1440 1410 1385 1360 1340 1315 1295 1275

41 2015 1965 1920 1880 1840 1800 1760 1725 1690 1660 1625 1595 1565 1535 1510 1485 1460 1435 1410 1385

42 2205 2155 2105 2060 2015 1970 1930 1890 1855 1815 1780 1750 1715 1685 1655 1625 1595 1570 1545 1520

43 2510 2450 2395 2340 2290 2240 2195 2150 2105 2065 2025 1985 1950 1915 1880 1845 1815 1785 1755 1725

44 2855 2785 2725 2665 2605 2550 2495 2445 2395 2350 2300 2260 2220 2180 2140 2100 2065 2030 1995 1965

45 3110 3035 2970 2905 2840 2780 2720 2665 2615 2560 2515 2465 2420 2375 2330 2290 2255 2215 2180 2140

46 3390 3310 3235 3165 3095 3030 2965 2905 2850 2790 2740 2685 2635 2590 2545 2500 2455 2415 2375 2335

47 3700 3610 3530 3450 3375 3305 3235 3170 3105 3045 2985 2930 2875 2825 2775 2725 2680 2630 2590 2545

48 4025 3935 3845 3760 3675 3600 3525 3450 3330 3315 3255 3190 3130 3075 3020 2965 2915 2865 2820 2775

49 4350 4245 4150 4060 3970 3885 3805 3725 3650 3580 3510 3445 3380 3320 3260 3205 3150 3095 3045 2995

50 4720 4610 4505 4405 4310 4215 4130 4045 3965 3885 3810 3740 3670 3605 3540 3480 3415 3360 3305 3250

51 5075 4955 4845 4735 4635 4535 4440 4350 4265 4180 4100 4020 3945 3875 3805 3740 3675 3615 3550 3495

52 5485 5360 5235 5120 5010 4905 4800 4700 4610 4520 4430 4350 4270 4190 4115 4045 3975 3905 3840 3780

53 5925 5790 5655 5530 5410 5295 5185 5080 4975 4880 4785 4695 4610 4525 4445 4365 4290 4220 4150 4080

54 6310 6165 6025 5890 5760 5635 5520 5410 5300 5195 5095 5000 4905 4815 4730 4650 4570 4490 4415 4345

55 6765 6610 6460 6315 6180 6045 5920 5800 5685 5575 5465 5365 5265 5170 5075 4985 4900 4815 4735 4660

56 7260 7090 6930 6775 6625 6485 6350 6220 6095 5975 5860 5750 5645 5545 5445 5350 5255 5165 5080 4995

57 7785 7605 7430 7265 7110 6955 6810 6675 6540 6410 6290 6170 6055 5945 5840 5735 5635 5540 5450 5360

58 8350 8155 7970 7795 7625 7460 7305 7155 7015 6875 6745 6615 6495 6375 6260 6150 6045 5945 5845 5745

59 8780 8575 8380 8195 8015 7845 7680 7525 7375 7230 7090 6955 6825 6705 6585 6470 6360 6250 6145 6045

60 9230 9015 8810 8615 8425 8245 8075 7910 7750 7600 7455 7315 7175 7045 6920 6800 6680 6570 6460 6355

61 9700 9475 9260 9055 8860 8670 8490 8315 8150 7990 7835 7690 7545 7410 7275 7150 7025 6905 6790 6680

62 10200 9960 9735 9520 9310 9115 8925 8740 8565 8400 8240 8080 7930 7790 7650 7515 7385 7260 7140 7020

63 10615 10370 10135 9910 9690 9485 9290 9100 8915 8740 8575 8410 8255 8105 7960 7820 7685 7555 7430 7310

64 11050 10790 10545 10310 10090 9875 9670 9470 9280 9100 8925 8755 8595 8435 8285 8140 8000 7865 7735 7605

65 11500 11230 10975 10735 10500 10275 10060 9855 9660 9470 9290 9115 8945 8780 8625 8475 8330 8185 8050 7920

66 11970 11690 11425 11170 10930 10695 10475 10260 10055 9855 9670 9485 9310 9140 8975 8820 8670 8520 8380 8240

LONG TRAVEL RANGE

Loads in Kgs

Page 9

QUALITY CONSTANT SUPPORT SELECTION TABLE STANDARD TRAVEL RANGE – LOADS IN Kgs

Constant

Spring TOTAL TRAVEL IN MILLIMETRESSize

40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 410

1 80 65 52 45 40 35 30 28 26 24 22 21 20 18 17 16 15 14

2 100 80 67 57 50 45 40 36 33 31 29 27 25 23 22 21 20 18

3 125 100 85 72 63 55 50 45 42 39 36 34 32 30 28 27 25 24

4 160 130 107 92 81 72 64 59 54 50 46 43 40 38 36 34 32 30

5 205 165 135 117 102 90 82 75 68 63 58 55 51 48 45 43 41 39

6 260 210 175 150 130 115 105 95 87 80 75 70 65 60 58 55 52 50

7 330 265 220 190 165 147 133 120 110 102 95 88 83 78 75 70 65 63

8 420 335 280 240 210 185 170 155 140 130 120 112 105 100 95 90 85 80

9 535 430 360 305 270 240 215 195 180 165 155 145 135 125 120 115 105 100

10 680 545 455 390 340 300 270 245 225 210 195 180 170 160 150 145 135 130

11 865 690 575 495 430 385 345 315 290 265 245 230 215 205 190 180 175 165

12 1095 875 730 625 550 485 440 400 365 335 315 290 275 260 245 230 220 210

13 825 705 620 550 495 450 410 380 355 330 310 290 275 260 250 235 225 215 205 200 190

14 925 795 695 620 555 505 465 430 395 370 350 330 310 295 280 265 255 240 230 225 215

15 1040 895 780 695 625 570 520 480 445 415 390 365 345 330 310 300 285 270 260 250 240

16 1150 988 865 770 690 630 575 530 495 460 430 405 385 365 345 330 315 300 290 275 265

17 1270 1090 955 845 765 695 635 590 545 510 480 450 425 400 380 365 345 330 320 305 295

18 1445 1240 1085 965 865 790 720 665 620 580 540 510 480 455 435 415 395 375 360 347 335

19 1640 1405 1230 1095 985 895 820 760 700 655 615 580 550 515 490 470 445 430 410 395 380 365 350 340 330 315 305 300 290 280 270

20 1785 1530 1340 1190 1070 975 895 825 765 715 670 630 595 565 535 510 490 465 445 430 410 395 385 370 355 345 335 325 315 305 300

21 1945 1665 1460 1295 1165 1060 970 895 835 775 730 685 650 615 585 555 530 505 485 465 450 430 415 400 390 375 365 355 345 335 325

22 2120 1820 1590 1415 1275 1155 1060 980 910 850 795 750 710 670 635 605 580 555 530 510 490 470 455 440 425 410 400 385 375 365 355

23 2315 1985 1735 1545 1390 1265 1160 1070 990 925 870 820 770 730 695 660 630 605 580 555 535 515 495 480 465 450 435 420 410 395 385

24 2515 2155 1890 1675 1510 1370 1260 1160 1080 1005 945 890 840 795 755 720 685 655 630 605 580 560 540 520 505 485 470 455 445 430 420

25 2765 2370 2075 1845 1660 1510 1385 1275 1185 1105 1035 975 920 875 830 790 755 720 690 665 640 615 595 570 555 535 520 500 490 475 460

26 3055 2620 2290 2035 1830 1665 1525 1410 1310 1220 1145 1078 1020 965 915 870 835 795 765 735 705 680 655 630 610 590 575 555 540 525 510

27 2980 2610 2320 2085 1895 1740 1605 1490 1390 1300 1225 1160 1100 1045 995 950 910 870 835 800 770 745 720 695 675 650 630 615 595 580

28 3375 2950 2625 2360 2145 1970 1815 1685 1575 1475 1390 1310 1245 1180 1125 1075 1030 985 945 910 875 845 815 785 760 740 715 695 675 655

29 3690 3225 2870 2580 2345 2150 1985 1845 1720 1615 1520 1435 1360 1290 1230 1175 1120 1075 1030 995 955 920 890 860 830 810 780 760 735 715

30 4015 3515 3125 2810 2555 2345 2160 2010 1875 1755 1655 1560 1480 1405 1340 1280 1220 1170 1125 1080 1040 1005 970 940 910 880 850 825 805 780

31 4380 3830 3405 3065 2785 2555 2355 2190 2045 1915 1805 1700 1615 1530 1460 1395 1330 1275 1225 1180 1135 1095 1055 1020 990 960 930 900 875 850

32 4775 4175 3710 3340 3035 2785 2570 2385 2225 2090 1965 1855 1760 1670 1590 1520 1455 1390 1335 1285 1235 1195 1150 1115 1080 1045 1010 985 955 930

33 5465 4780 4250 3825 3475 3190 2940 2730 2550 2390 2250 2125 2015 1915 1820 1740 1665 1595 1530 1470 1415 1365 1320 1275 1235 1195 1160 1125 1095 1065

34 4700 4230 3845 3525 3255 3020 2820 2645 2485 2350 2225 2115 2015 1920 1840 1760 1690 1625 1565 1510 1460 1410 1365 1320 1280 1245 1210 1175 1145 1115 1085 1055 1030

35 5145 4630 4210 3860 3565 3310 3090 2895 2725 2575 2440 2315 2205 2105 2015 1930 1855 1780 1715 1655 1600 1545 1495 1445 1405 1360 1325 1285 1250 1220 1190 1160 1130

36 5850 5265 4785 4390 4050 3760 3510 3290 3095 2925 2770 2635 2505 2395 2290 2195 2105 2025 1950 1880 1815 1755 1700 1645 1595 1550 1505 1465 1420 1385 1350 1315 1285

37 6655 5990 5445 4995 4610 4280 3994 3745 3525 3330 3155 2995 2855 2725 2605 2495 2395 2305 2220 2140 2065 1995 1935 1870 1815 1760 1710 1665 1620 1575 1535 1500 1460

38 7260 6535 5940 5445 5025 4665 4355 4085 3845 3630 3440 3265 3110 2970 2840 2720 2615 2515 2420 2335 2255 2180 2110 2040 1980 1920 1865 1815 1765 1720 1675 1635 1595

39 7910 7120 6475 5935 5475 5085 4745 4450 4190 3955 3750 3560 3390 3235 3095 2965 2850 2740 2640 2545 2455 2375 2295 2250 2160 2095 2035 1980 1925 1875 1825 1780 1735

40 7060 6470 5975 5545 5175 4855 4570 4315 4085 3885 3700 3530 3375 3235 3105 2985 2875 2775 2680 2590 2505 2425 2355 2285 2220 2160 2100 2045 1990 1940 1895

41 7685 7045 6505 6040 5635 5285 4975 4700 4450 4230 4025 3845 3675 3525 3380 3250 3130 3020 2915 2820 2730 2640 2560 2485 2415 2350 2285 2225 2170 2115 2060

42 8420 7720 7125 6615 6175 5790 5450 5145 4875 4630 4410 4210 4030 3860 3705 3565 3430 3305 3195 3090 2990 2895 2805 2725 2645 2575 2505 2440 2375 2315 2260

43 9575 8775 8100 7520 7020 6580 6195 5850 5540 5265 5015 4785 4580 4390 4210 4050 3900 3760 3630 3510 3395 3290 3190 3095 3010 2925 2845 2770 2700 2635 2570

44 10895 9985 9215 8560 7990 7490 7050 6655 6305 5990 5705 5445 5210 4995 4795 4610 4440 4280 4130 3995 3865 3745 3630 3525 3425 3330 3240 3155 3070 2995 2925

45 11880 10890 10050 9330 8710 8165 7685 7260 6875 6530 6220 5940 5680 5445 5225 5025 4840 4665 4505 4355 4215 4085 3960 3845 3735 3630 3530 3440 3350 3265 3185

46 12945 11865 10955 10170 9495 8900 8375 7910 7495 7120 6780 6475 6190 5935 5695 5475 5275 5085 4910 4745 4595 4450 4315 4190 4070 3955 3850 3750 3650 3560 3475

47 14120 12940 11945 11095 10355 9705 9135 8630 8175 7765 7395 7060 6755 6470 6210 5975 5750 5545 5355 5175 5010 4855 4705 4570 4435 4315 4200 4085 3980 3885 3790

48 15375 14095 13010 12080 11275 10575 9950 9395 8900 8455 8055 7690 7355 7045 6765 6505 6265 6040 5830 5640 5455 5285 5125 4975 4830 4700 4570 4450 4335 4230 4125

49 16600 15215 14045 13045 12175 11415 10740 10145 9610 9130 8695 8300 7940 7610 7305 7025 6765 6520 6295 6085 5890 5705 5535 5370 5220 5075 4935 4805 4680 4565 4455

50 18015 16515 15245 14155 13210 12385 11655 11010 10430 9910 9435 9010 8615 8255 7930 7620 7340 7075 6835 6605 6395 6195 6005 5830 5665 5505 5355 5215 5080 4955 4835

51 19375 17760 16395 15225 14210 13320 12540 11840 11220 10660 10150 9690 9265 8880 8525 8200 7895 7610 7350 7105 6875 6660 6460 6270 6090 5920 5760 5610 5465 5330 5200

52 20950 19200 17725 16460 15360 14400 13555 12800 12130 11520 10975 10475 10020 9600 9215 8865 8535 8230 7945 7680 7435 7200 6980 6775 6585 6400 6230 6065 5910 5760 5620

53 22625 20740 19145 17775 16590 15555 14640 13825 13095 12445 11850 11310 10820 10370 9955 9570 9215 8890 8580 8295 8025 7775 7540 7320 7110 6915 6725 6550 6380 6220 6070

54 24090 22085 20385 18925 17665 16560 15590 14720 13945 13250 12620 12045 11520 11040 10600 10190 9820 9465 9140 8835 8545 8280 8030 7795 7570 7360 7160 6975 6795 6625 6465

55 25840 23685 21865 20300 18950 17765 16720 15790 14960 14210 13535 12920 12355 11845 11370 10930 10525 10150 9800 9475 9170 8880 8615 8360 8120 7895 7680 7480 7290 7105 6930

56 27715 25404 23450 21775 20325 19055 17930 16935 16045 15240 14515 13855 13255 12700 12195 11725 11290 10885 10510 10160 9835 9525 9240 8965 8710 8470 8240 8020 7815 7620 7435

57 29725 27245 25150 23355 21795 20435 19230 18165 17210 16350 15570 14860 14215 13625 13080 12576 12110 11675 11275 10900 10545 10220 9910 9615 9340 9080 8835 8600 8385 8175 7975

58 31880 29225 26975 25050 23380 21920 20630 19485 18455 17535 16700 15940 15245 14610 14025 13490 12990 12525 12090 11690 11310 10960 10625 10315 10020 9740 9480 9225 8990 8765 8555

59 24578 23040 21685 20480 19405 18435 17555 16760 16030 15360 14745 14180 13655 13165 12715 12290 11895 11520 11170 10845 10535 10240 9965 9700 9455 9215 8990

60 25838 24225 22800 21530 20400 19380 18455 17615 16850 16150 15505 14905 14355 13840 13365 12920 12505 12110 11745 11400 11075 10765 10475 10200 9940 9690 9455

61 27164 25465 23970 22635 21445 20375 19405 18520 17715 16980 16300 15670 15090 14550 14050 13580 13145 12735 12345 11985 11640 11320 11010 10725 10450 10185 9940

62 28557 26770 25200 23800 22545 21420 20400 19470 18625 17850 17135 16475 15865 15300 14770 14280 13820 13385 12980 12600 12240 11900 11575 11275 10985 10710 10450

63 29723 27865 26225 24770 23465 22290 21230 20265 19385 18575 17835 17150 16510 15925 15375 14860 14380 13930 13510 13115 12740 12385 12050 11730 11430 11145 10875

64 30937 29005 27295 25780 24425 23205 22100 21095 20175 19335 18560 17850 17185 16575 16000 15470 14970 14500 14060 13650 13260 12890 12540 12210 11900 11600 11320

65 32200 30185 28410 26835 25420 24150 23000 21955 21000 20125 19320 18575 17890 17250 16655 16100 15580 15095 14635 14205 13800 13420 13055 12710 12385 12075 11780

66 33515 31420 29570 27930 26460 25135 23940 22850 21855 20945 20110 19335 18620 17955 17335 16755 16215 15710 15235 14785 14365 13965 13585 13230 12890 12570 12260

NOTE:- FOR FIG QC 110 ONLY, SELECT FROM R.H. SIDE OF THICK LINE

Page 10

QUALITY CONSTANT SUPPORT SELECTION TABLE

LONG TRAVEL RANGE

ConstantSpring TOTAL TRAVEL IN MILLIMETRESSize

420 430 440 450 460 470 480 490 500 510 520 530 540 550 560 570 580 590 600 610

40 18.14 17.70 17.31 16.92 16.57 16.18 15.89 15.54 15.25 14.96 14.66 14.37 14.12 13.83 13.58 13.34 13.14 12.90 12.70 12.50

41 19.76 19.27 18.83 18.44 18.04 17.65 17.26 16.92 16.57 16.28 15.94 15.64 15.35 15.05 14.81 14.56 14.32 14.07 13.83 13.58

42 21.62 21.13 20.64 20.20 19.76 19.32 18.93 18.53 18.19 17.80 17.46 17.16 16.82 16.52 16.23 15.94 15.64 15.40 15.15 14.91

43 24.61 24.03 23.49 22.95 22.46 21.97 21.53 21.08 20.64 20.25 19.86 19.47 19.12 18.78 18.44 18.09 17.80 17.50 17.21 16.92

44 28.00 27.31 26.72 26.13 25.55 25.01 24.47 23.98 23.49 23.05 22.56 22.16 21.77 21.38 20.99 20.59 20.25 19.91 19.56 19.27

45 30.50 29.76 29.13 28.49 27.85 27.26 26.67 26.13 25.64 25.11 24.66 24.17 23.73 23.29 22.85 22.46 22.11 21.72 21.38 20.99

46 33.24 32.46 31.72 31.04 30.35 29.71 29.08 28.49 27.95 27.36 26.87 26.33 25.84 25.40 24.96 24.52 24.08 23.68 23.29 22.90

47 36.28 35.40 34.62 33.83 33.10 32.41 31.72 31.09 30.45 29.86 29.27 28.73 28.19 27.70 27.21 26.72 26.28 25.79 25.40 24.96

48 39.47 38.59 37.71 36.87 36.04 35.30 34.57 33.83 32.66 32.51 31.92 31.28 30.69 30.16 29.62 29.08 28.59 28.10 27.65 27.21

49 42.66 41.63 40.70 39.81 38.93 38.10 37.31 36.53 35.79 35.11 34.42 33.78 33.15 32.56 31.97 31.43 30.89 30.35 29.86 29.37

50 46.29 45.21 44.18 43.20 42.27 41.34 40.50 39.67 38.88 38.10 37.36 36.68 35.99 35.35 34.72 34.13 33.49 32.95 32.41 31.87

51 49.77 48.59 47.51 46.43 45.45 44.47 43.54 42.66 41.83 40.99 40.21 39.42 38.69 38.00 37.31 36.68 36.04 35.45 34.81 34.27

52 53.79 52.56 51.34 50.21 49.13 48.10 47.07 46.09 45.21 44.33 43.44 42.66 41.87 41.09 40.35 39.67 38.98 38.29 37.66 37.07

53 58.10 56.78 55.46 54.23 53.05 51.93 50.85 49.82 48.79 47.86 46.92 46.04 45.21 44.38 43.59 42.81 42.07 41.38 40.70 40.01

54 61.88 60.46 59.09 57.76 56.49 55.26 54.13 53.05 51.98 50.95 49.96 49.03 48.10 47.22 46.39 45.60 44.82 44.03 43.30 42.61

55 66.34 64.82 63.35 61.93 60.61 59.28 58.06 56.88 55.75 54.67 53.59 52.61 51.63 50.70 49.77 48.89 48.05 47.22 46.43 45.70

56 71.20 69.53 67.96 66.44 64.97 63.60 62.27 61.00 59.77 58.59 57.47 56.39 55.36 54.38 53.40 52.47 51.53 50.65 49.82 48.98

57 76.34 74.58 72.86 71.25 69.73 68.21 66.78 65.46 64.14 62.86 61.68 60.51 59.38 58.30 57.27 56.24 55.26 54.33 53.45 52.56

58 81.89 79.97 78.16 76.44 74.78 73.16 71.64 70.17 68.79 67.42 66.15 64.87 63.69 62.52 61.39 60.31 59.28 58.30 57.32 56.34

59 86.10 84.09 82.18 80.37 78.60 76.93 75.32 73.80 72.32 70.90 69.53 68.21 66.93 65.75 64.58 63.45 62.37 61.29 60.26 59.28

60 90.52 88.41 86.40 84.48 82.62 80.86 79.19 77.57 76.00 74.53 73.11 71.74 70.36 69.09 67.86 66.69 65.51 64.43 63.35 62.32

61 95.12 92.92 90.81 88.80 86.89 85.02 83.26 81.54 79.92 78.36 76.84 75.41 73.99 72.67 71.34 70.12 68.89 67.71 66.59 65.51

62 100.03 97.67 95.47 93.36 91.30 89.39 87.52 85.71 83.99 82.38 80.81 79.24 77.77 76.39 75.02 73.70 72.42 71.20 70.02 68.84

63 104.10 101.69 99.39 97.18 95.03 93.02 91.10 89.24 87.43 85.71 84.09 82.47 80.95 79.48 78.06 76.69 75.36 74.09 72.86 71.69

64 108.36 105.81 103.41 101.11 98.95 96.84 94.83 92.87 91.01 89.24 87.52 85.86 84.29 82.72 81.25 79.83 78.45 77.13 75.85 74.58

65 112.78 110.13 107.63 105.27 102.97 100.76 98.65 96.64 94.73 92.87 91.10 89.39 87.72 86.10 84.58 83.11 81.69 80.27 78.94 77.67

66 117.39 114.64 112.04 109.54 107.19 104.88 102.72 100.62 98.61 96.64 94.83 93.02 91.30 89.63 88.01 86.49 85.02 83.55 82.18 80.81

Loads in Kns

Page 11

QUALITY CONSTANT SUPPORT SELECTION TABLE STANDARD TRAVEL RANGE – LOADS IN Kns

Constant

Spring TOTAL TRAVEL IN MILLIMETRESSize

40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 410

1 0.78 0.64 0.51 0.44 0.39 0.34 0.29 0.27 0.25 0.24 0.22 0.21 0.20 0.18 0.17 0.16 0.15 0.14

2 0.98 0.78 0.66 0.56 0.49 0.44 0.39 0.35 0.32 0.30 0.28 0.26 0.25 0.23 0.22 0.21 0.20 0.18

3 1.23 0.98 0.83 0.71 0.62 0.54 0.49 0.44 0.41 0.38 0.35 0.33 0.31 0.29 0.27 0.26 0.25 0.24

4 1.57 1.27 1.05 0.90 0.79 0.71 0.63 0.58 0.53 0.49 0.45 0.42 0.39 0.37 0.35 0.33 0.31 0.29

5 2.01 1.62 1.32 1.15 1.00 0.88 0.80 0.74 0.67 0.62 0.57 0.54 0.50 0.47 0.44 0.42 0.40 0.38

6 2.55 2.06 1.72 1.47 1.27 1.13 1.03 0.93 0.85 0.78 0.74 0.69 0.64 0.59 0.57 0.54 0.51 0.49

7 3.24 2.60 2.16 1.86 1.62 1.44 1.30 1.18 1.08 1.00 0.93 0.86 0.81 0.76 0.74 0.69 0.64 0.62

8 4.12 3.29 2.75 2.35 2.06 1.81 1.67 1.52 1.37 1.27 1.18 1.10 1.03 0.98 0.93 0.88 0.83 0.78

9 5.25 4.22 3.53 2.99 2.65 2.35 2.11 1.91 1.77 1.62 1.52 1.42 1.32 1.23 1.18 1.13 1.03 0.98

10 6.67 5.34 4.46 3.82 3.33 2.94 2.65 2.40 2.21 2.06 1.91 1.77 1.67 1.57 1.47 1.42 1.32 1.27

11 8.48 6.77 5.64 4.85 4.22 3.78 3.38 3.09 2.84 2.60 2.40 2.26 2.11 2.01 1.86 1.77 1.72 1.62

12 10.74 8.58 7.16 6.13 5.39 4.76 4.31 3.92 3.58 3.29 3.09 2.84 2.70 2.55 2.40 2.26 2.16 2.06

13 8.09 6.91 6.08 5.39 4.85 4.41 4.02 3.73 3.48 3.24 3.04 2.84 2.70 2.55 2.45 2.30 2.21 2.11 2.01 1.96 1.86

14 9.07 7.80 6.82 6.08 5.44 4.95 4.56 4.22 3.87 3.63 3.43 3.24 3.04 2.89 2.75 2.60 2.50 2.35 2.26 2.21 2.11

15 10.20 8.78 7.65 6.82 6.13 5.59 5.10 4.71 4.36 4.07 3.82 3.58 3.38 3.24 3.04 2.94 2.79 2.65 2.55 2.45 2.35

16 11.28 9.69 8.48 7.55 6.77 6.18 5.64 5.20 4.85 4.51 4.22 3.97 3.78 3.58 3.38 3.24 3.09 2.94 2.84 2.70 2.60

17 12.45 10.69 8.37 8.29 7.50 6.82 6.23 5.79 5.34 5.00 4.71 4.41 4.17 3.92 3.73 3.58 3.38 3.24 3.14 2.99 2.89

18 14.17 12.16 10.64 9.46 8.48 7.75 7.06 6.52 6.08 5.69 5.30 5.00 4.71 4.46 4.27 4.07 3.87 3.68 3.53 3.40 3.29

19 16.08 13.78 12.06 10.74 9.66 8.78 8.04 7.45 6.86 6.42 6.03 5.69 5.39 5.05 4.81 4.61 4.36 4.22 4.02 3.87 3.73 3.58 3.43 3.33 3.24 3.09 1.99 2.94 2.84 2.75 2.65

20 17.50 15.00 13.14 11.67 10.49 9.55 8.78 8.09 7.50 7.01 6.57 6.18 5.83 5.54 5.25 5.00 4.81 4.56 4.36 4.22 4.02 3.87 3.78 3.63 3.48 3.38 3.29 3.19 3.09 2.99 2.94

21 19.07 16.33 14.32 12.70 11.42 10.40 9.51 8.78 8.19 7.60 7.16 6.72 6.37 6.03 5.74 5.44 5.20 4.95 4.76 4.56 4.41 4.22 4.07 3.92 3.82 3.68 3.58 3.48 3.38 3.29 3.19

22 20.79 17.85 15.59 13.88 12.50 11.33 10.40 9.61 8.92 8.34 7.80 7.35 6.96 6.57 6.23 5.93 5.69 5.44 5.20 5.00 4.81 4.61 4.46 4.31 4.17 4.02 3.92 3.78 3.68 3.58 3.48

23 22.70 19.47 17.01 15.15 13.63 12.41 11.38 10.49 9.71 9.07 8.53 8.04 7.55 7.16 6.82 6.47 6.18 5.93 5.69 5.44 5.25 5.05 4.85 4.71 4.56 4.41 4.27 4.12 4.02 3.87 3.78

24 24.66 21.13 18.53 16.43 14.81 13.44 12.36 11.38 10.59 9.86 9.27 8.73 8.24 7.80 7.40 7.06 6.72 6.42 6.18 5.93 5.69 5.49 5.30 5.10 4.95 4.76 4.61 4.46 4.36 4.22 4.12

25 27.12 23.24 20.35 18.09 16.28 14.81 13.58 12.50 11.62 10.84 10.15 9.57 9.02 8.58 8.14 7.75 7.40 7.06 6.77 6.52 6.28 6.03 5.83 5.59 5.44 5.25 5.10 4.90 4.81 4.66 4.51

26 29.96 25.69 22.46 19.96 17.95 16.33 14.96 13.83 12.85 11.96 11.23 10.57 10.00 9.46 8.97 8.53 8.19 7.80 7.50 7.21 6.91 6.67 6.42 6.18 5.98 5.79 5.64 5.44 5.30 5.15 5.00

27 29.22 25.60 22.75 20.45 18.58 17.06 15.74 14.61 13.63 12.75 12.01 11.38 10.79 10.25 8.76 8.32 8.92 8.53 8.19 7.85 7.55 7.31 7.06 6.82 6.62 6.37 6.18 6.03 5.83 5.69

28 33.10 28.93 25.74 23.14 21.04 19.32 17.80 16.52 15.45 14.46 13.63 12.85 12.21 11.57 11.03 10.54 10.10 8.66 8.27 8.92 8.58 8.29 7.99 7.70 7.45 7.26 7.01 6.82 6.62 6.42

29 36.19 31.63 28.15 25.30 23.00 21.08 19.47 18.09 16.87 15.84 14.91 14.07 13.34 12.65 12.06 11.52 10.98 10.54 10.10 8.76 8.37 8.02 8.73 8.43 8.14 7.94 7.65 7.45 7.21 7.01

30 39.37 34.47 30.65 27.56 25.06 23.00 21.18 19.71 18.39 17.21 16.23 15.30 14.51 13.78 13.14 12.55 11.96 11.47 11.03 10.59 10.20 8.86 8.51 8.22 8.92 8.63 8.34 8.09 7.89 7.65

31 42.95 37.56 33.39 30.06 27.31 25.06 23.09 21.48 20.05 18.78 17.70 16.67 15.84 15.00 14.32 13.68 13.04 12.50 12.01 11.57 11.13 10.74 10.35 10.00 8.71 8.41 8.12 8.83 8.58 8.34

32 46.83 40.94 36.38 32.75 29.76 27.31 25.20 23.39 21.82 20.50 19.27 18.19 17.26 16.38 15.59 14.91 14.27 13.63 13.09 12.60 12.11 11.72 11.28 10.93 10.59 10.25 8.90 8.66 8.37 8.12

33 53.59 46.88 41.68 37.51 34.08 31.28 28.83 26.77 25.01 23.44 22.06 20.84 19.76 18.78 17.85 17.06 16.33 15.64 15.00 14.42 13.88 13.39 12.94 12.50 12.11 11.72 11.38 11.03 10.74 10.44

34 46.09 41.48 37.71 34.57 31.92 29.62 27.65 25.94 24.37 23.05 21.82 20.74 19.76 18.83 18.04 17.26 16.57 15.94 15.35 14.81 14.32 13.83 13.39 12.94 12.55 12.21 11.87 11.52 11.23 10.93 10.64 10.35 10.10

35 50.46 45.40 41.29 37.85 34.96 32.46 30.30 28.39 26.72 25.25 23.93 22.70 21.62 20.64 19.76 18.93 18.19 17.46 16.82 16.23 15.69 15.15 14.66 14.17 13.78 13.34 12.99 12.60 12.26 11.96 11.67 11.38 11.08

36 57.37 51.63 46.92 43.05 39.72 36.87 34.42 32.26 30.35 28.68 27.16 25.84 24.57 23.49 22.46 21.53 20.64 19.86 19.12 18.44 17.80 17.21 16.67 16.13 15.64 15.20 14.76 14.37 13.93 13.58 13.24 12.90 12.60

37 65.26 58.74 53.40 48.98 45.21 41.97 39.17 36.73 34.57 32.66 30.94 29.37 28.00 26.72 25.55 24.47 23.49 22.60 21.77 20.99 20.25 19.56 18.98 18.34 17.80 17.26 16.77 16.33 15.89 15.45 15.05 14.71 14.32

38 71.20 64.09 58.25 53.40 49.28 45.75 42.71 40.06 37.71 35.60 33.73 32.02 30.50 29.13 27.85 26.67 25.64 24.66 23.73 22.90 22.11 21.38 20.69 20.01 19.42 18.83 18.29 17.80 17.31 16.87 16.43 16.03 15.64

39 77.57 69.82 63.50 58.20 53.69 49.87 46.53 43.64 41.09 38.79 36.77 34.91 33.24 31.72 30.35 29.08 27.95 26.87 25.89 24.96 24.08 23.29 22.51 22.06 21.18 20.54 19.96 19.42 18.88 18.39 17.90 17.46 17.01

40 69.23 63.45 58.59 54.38 50.75 47.61 44.82 42.32 40.06 38.10 36.28 34.62 33.10 31.72 30.45 29.27 28.19 27.21 26.28 25.40 24.57 23.78 23.09 22.41 21.77 21.18 20.59 20.05 19.52 19.02 18.58

41 75.36 69.09 63.79 59.23 55.26 51.83 48.79 46.09 43.64 41.48 39.47 37.71 36.04 34.57 33.15 31.87 30.69 29.62 28.59 27.65 26.77 25.89 25.11 24.37 23.68 23.05 22.41 21.82 21.28 20.74 20.20

42 82.57 75.71 69.87 64.87 60.56 56.78 53.45 50.46 47.81 45.40 43.25 41.29 39.52 37.85 36.33 34.96 33.64 32.41 31.33 30.30 29.32 28.39 27.51 26.72 25.94 25.25 24.57 23.93 23.29 22.70 22.16

43 93.90 86.05 79.43 73.75 68.84 64.53 60.75 57.37 54.33 51.63 49.18 46.92 44.91 43.05 41.29 39.72 38.25 36.87 35.60 34.42 33.29 32.26 31.28 30.35 29.52 28.68 27.90 27.16 26.48 25.84 25.20

44 106.84 97.92 90.37 83.94 78.36 73.45 69.14 65.26 61.83 58.74 55.95 53.40 51.09 48.98 47.02 45.21 43.54 41.97 40.50 39.18 37.90 36.73 35.60 34.57 33.59 32.66 31.77 30.94 30.11 29.37 28.68

45 116.50 106.79 98.56 91.50 85.42 80.07 75.36 71.20 67.42 64.04 61.00 58.25 55.70 53.40 51.24 49.28 47.46 45.75 44.18 42.71 41.34 40.06 38.83 37.71 36.63 35.60 34.62 33.73 32.85 32.02 31.23

46 126.95 116.36 107.43 99.73 93.11 87.28 82.13 77.57 73.50 69.82 66.49 63.50 60.70 58.20 55.85 53.69 51.73 49.87 48.15 46.53 45.06 43.64 42.32 41.09 39.91 38.79 37.76 36.77 35.79 34.91 34.08

47 138.47 126.90 117.14 108.80 101.55 95.17 89.58 84.63 80.17 76.15 72.52 69.23 66.24 63.45 60.90 58.59 56.39 54.38 52.51 50.75 49.13 47.61 46.14 44.82 43.49 42.32 41.19 40.06 39.03 38.10 37.17

48 150.78 138.22 127.58 118.46 110.57 103.71 97.58 92.13 87.28 82.92 78.99 75.41 72.13 69.09 66.34 63.79 61.44 59.23 57.17 55.31 53.50 51.83 50.26 48.79 47.37 46.09 44.82 43.64 42.51 41.48 40.45

49 162.79 149.21 137.73 127.93 119.40 111.94 105.32 99.49 94.24 89.53 85.27 81.40 77.86 74.63 71.64 68.89 66.34 63.94 61.73 59.67 57.76 55.95 54.28 52.66 51.19 49.77 48.40 47.12 45.90 44.77 43.69

50 176.67 161.96 149.50 138.81 129.55 121.46 114.30 107.97 102.28 97.18 92.53 88.36 84.48 80.95 77.77 74.73 71.98 69.38 67.03 64.77 62.71 60.75 58.89 57.17 55.55 53.99 52.51 51.14 49.82 48.59 47.42

51 190.00 174.17 160.78 149.31 139.35 130.62 122.98 116.11 110.03 104.54 99.54 95.03 90.86 87.08 83.60 80.41 77.42 74.63 72.08 69.68 67.42 65.31 63.35 61.49 59.72 58.06 56.49 55.02 53.59 52.27 50.99

52 205.45 188.29 173.82 161.42 150.63 141.22 132.93 125.53 118.95 112.97 107.63 102.72 98.26 94.14 90.37 86.94 83.70 80.71 77.91 75.32 72.91 70.61 68.45 66.44 64.58 62.76 61.10 59.48 57.96 56.49 55.11

53 221.88 203.39 187.75 174.31 162.69 152.54 143.57 135.58 128.42 122.04 116.21 110.91 106.11 101.69 97.63 93.85 90.37 87.18 84.14 81.35 78.70 76.25 73.94 71.78 69.73 67.81 65.95 64.23 62.57 61.00 59.53

54 236.24 216.58 199.91 185.59 173.23 162.40 152.89 144.35 136.75 129.94 123.76 118.12 112.97 108.27 103.95 99.93 96.30 92.82 89.63 86.64 83.80 81.20 78.75 76.44 74.24 72.18 70.22 68.40 66.64 64.97 63.40

55 253.40 232.27 214.42 199.07 185.84 174.22 163.97 154.85 146.71 139.35 132.73 126.70 121.16 116.16 111.50 107.19 103.21 99.54 96.11 92.92 89.93 87.08 84.48 81.98 79.63 77.42 75.32 73.35 71.49 69.68 67.96

56 271.79 249.13 229.97 213.54 199.32 186.87 175.83 166.08 157.35 149.45 142.34 135.87 129.99 124.54 119.59 114.98 110.72 106.75 103.07 99.64 96.45 93.41 90.61 87.92 85.42 83.06 80.81 78.65 76.64 74.73 72.91

57 291.50 267.18 246.64 229.03 213.74 200.40 188.58 178.14 168.77 160.34 152.69 145.73 139.40 133.62 128.27 123.33 118.76 114.49 110.57 106.89 103.41 100.22 97.18 94.29 91.59 89.04 86.64 84.34 82.23 80.17 78.21

58 312.64 286.60 264.53 245.66 229.28 214.96 202.31 191.08 180.98 171.96 163.77 156.32 149.50 143.28 137.54 132.29 127.39 122.83 118.56 114.64 110.91 107.48 104.20 101.16 98.26 95.52 92.97 90.47 88.16 85.96 83.90

59 241.03 225.95 212.66 200.84 190.30 180.79 172.16 164.36 157.20 150.63 144.60 139.06 133.91 129.10 124.69 120.52 116.65 112.97 109.54 106.35 103.31 100.42 97.72 95.12 92.72 90.37 88.16

60 253.38 237.57 223.59 211.14 200.06 190.05 180.98 172.74 165.24 158.38 152.05 146.17 140.77 135.72 131.07 126.70 122.63 118.76 115.18 111.80 108.61 105.57 102.72 100.03 97.48 95.03 92.72

61 266.39 249.73 235.07 221.97 210.30 199.81 190.30 181.62 173.72 166.52 159.85 153.67 147.98 142.69 137.78 133.17 128.91 124.89 121.06 117.53 114.15 111.01 107.97 105.18 102.48 99.88 97.48

62 280.05 262.52 247.13 233.40 221.09 210.06 200.06 190.94 182.65 175.05 168.04 161.56 155.58 150.04 144.84 140.04 135.53 131.26 127.29 123.56 120.03 116.70 113.51 110.57 107.73 105.03 102.48

63 291.48 273.26 257.18 242.91 230.11 218.59 208.20 198.73 190.10 182.16 174.90 168.18 161.91 156.17 150.78 145.73 141.02 136.61 132.49 128.61 124.94 121.46 118.17 115.03 112.09 109.30 106.65

64 303.39 284.44 267.67 252.82 239.53 227.56 216.73 206.87 197.85 189.61 182.01 175.05 168.53 162.55 156.91 151.71 146.81 142.20 137.88 133.86 130.04 126.41 122.98 119.74 116.70 113.76 111.01

65 315.77 296.01 278.61 263.16 249.29 236.83 225.55 215.31 205.94 197.36 189.46 182.16 175.44 169.16 163.33 157.89 152.79 148.03 143.52 139.30 135.33 131.61 128.03 124.64 121.46 118.42 115.52

66 329.26 308.12 289.98 273.90 259.48 246.49 234.77 224.08 214.32 205.40 197.21 189.61 182.60 176.08 170.00 164.31 159.01 154.06 149.40 144.99 140.87 136.95 133.22 129.74 126.41 123.27 120.23

NOTE:- FOR FIG QC 110 ONLY, SELECT FROM R.H. SIDE OF THICK LINE

QUALITY CONSTANT SUPPORTS – FIG QC 100

Page 12

THE ROD TAKEOUT (R.T.O.)DIMENSIONS B, B1OR B2 ARE GIVENFOR THE LOADARM IN THE HIGHPOSITION. WHENTHE LOAD ARM ISSET IN THE LOWPOSITION, THETOTAL UP TRAVELMUST BE ADDEDTO DIMENSIONS B,B1 OR B2

QC 100 A

QC 100 BX

QC 100 BY

QC 100 C

QC 100 E

SIZES 7-12TRAVEL A B B1 B2 C Q

40 20 336 416 356 54 160

50 16 329 409 349 67 160

60 16 322 402 342 80 160

70 16 314 394 334 94 160

80 12 307 387 327 107 160

90 12 300 380 320 120 160

100 12 293 373 313 133 160

110 12 285 365 305 147 160

120 12 278 358 298 160 160

130 12 271 351 291 174 160

140 12 264 344 284 187 160

150 12 257 337 277 200 160

160 12 249 329 269 213 160

170 12 242 322 262 227 160

180 12 255 315 275 240 180

190 12 247 307 267 253 180

200 12 240 300 260 266 180

210 12 233 293 253 280 180


40 12 311 400 326 54 130

50 12 304 395 319 67 130

60 12 297 387 312 80 130

70 12 289 379 304 94 130

80 12 282 372 297 107 130

90 12 275 366 290 120 130

100 12 268 358 283 133 130

110 12 260 350 275 147 130

120 12 253 343 268 160 130

130 12 246 336 261 174 130

140 12 239 329 254 187 130

150 12 272 322 287 200 170

160 12 264 314 279 213 170

170 12 257 307 272 227 170

180 12 250 300 265 240 170

190 12 242 292 257 253 170

200 12 235 285 250 266 170

210 12 228 278 243 280 170

Page 13



60 30 446 541 476 80 245

70 30 439 534 469 94 245

80 24 432 527 462 107 245

90 24 425 520 455 120 245

100 24 417 512 447 133 245

110 24 410 505 440 147 245

120 20 403 498 433 160 245

130 20 395 490 425 174 245

140 20 388 483 418 187 245

150 20 381 476 411 200 245

160 20 373 468 403 213 245

170 20 366 461 396 227 245

180 16 359 454 389 240 245

190 16 352 447 382 253 245

200 16 345 440 375 266 245

210 16 337 432 367 280 245

220 16 330 425 360 293 245

230 16 323 418 353 306 245

240 16 316 411 346 320 245

250 16 308 403 338 333 245

260 16 301 396 331 346 245

270 16 294 389 324 360 245

280 16 286 381 316 373 245

290 16 279 374 309 386 245300 16 272 367 302 399 245310 16 315 360 345 413 295320 16 307 352 337 426 295330 12 300 345 330 439 295340 12 293 338 323 453 295350 12 286 331 316 466 295

360 12 279 324 309 479 295


70 36 494 604 529 94 305

80 36 487 597 522 107 305

90 36 480 590 515 120 305

100 36 472 582 507 133 305

110 30 465 575 500 147 305

120 30 458 568 493 160 305

130 30 450 560 485 174 305

140 30 443 553 478 187 305

150 30 436 546 471 200 305

160 30 428 538 463 213 305

170 24 421 531 456 227 305

180 24 414 524 449 240 305

190 24 407 517 442 253 305

200 24 400 510 435 266 305

210 24 393 503 428 280 305

220 24 385 495 420 293 305

230 24 378 488 413 306 305

240 20 371 481 406 320 305

250 20 363 473 398 333 305

260 20 356 466 391 346 305

270 20 349 459 384 360 305

280 20 341 451 376 373 305

290 20 334 444 369 386 305300 20 327 437 362 399 305310 20 320 430 355 413 305320 20 312 422 347 426 305330 20 305 415 340 439 305340 20 298 408 333 453 305350 20 291 401 326 466 305

360 20 284 394 319 479 305


90 48 540 655 580 120 370

100 42 532 647 572 133 370

110 42 525 640 565 147 370

120 42 518 633 558 160 370

130 42 510 625 550 174 370

140 36 503 618 543 187 370

150 36 496 611 536 200 370

160 36 488 603 528 213 370

170 36 481 596 521 227 370

180 36 474 589 514 240 370

190 30 467 582 507 253 370

200 30 460 575 500 266 370

210 30 453 568 493 280 370

220 30 445 560 485 293 370

230 30 438 553 478 306 370

240 30 431 546 471 320 370

250 30 423 538 463 333 370

260 30 416 531 456 346 370

270 30 409 524 449 360 370

280 30 401 416 441 373 370

290 30 394 509 434 386 370

300 30 387 502 427 399 370

310 24 380 495 420 413 370

320 24 372 487 412 426 370

330 24 365 480 405 439 370

340 24 358 473 398 453 370350 24 351 466 391 466 370360 24 344 459 384 479 370370 24 336 451 376 493 370380 24 329 444 369 506 370390 24 322 437 362 519 370400 24 314 429 354 532 370

410 24 307 422 347 546 370


110 56 645 785 695 147 450

120 56 638 778 688 160 450

130 56 630 770 680 174 450

140 56 623 763 673 187 450

150 48 616 756 666 200 450

160 48 608 748 658 213 450

170 48 601 741 651 227 450

180 48 594 734 644 240 450

190 48 587 727 637 253 450

200 42 580 720 630 266 450

210 42 573 713 623 280 450

220 42 565 705 615 293 450

230 42 558 698 608 306 450

240 42 551 691 601 320 450

250 42 544 684 594 333 450

260 42 537 677 587 346 450

270 36 529 669 579 360 450

280 36 521 661 571 373 450

290 36 515 655 565 386 450

300 36 508 648 558 399 450

310 36 500 640 550 413 450

320 36 493 633 543 426 450

330 36 486 626 536 439 450

340 36 478 618 528 453 450350 36 471 611 521 466 450360 36 464 604 514 479 450370 36 456 596 506 493 450380 30 449 589 499 506 450390 30 442 582 492 519 450400 30 435 575 485 532 450

410 30 428 568 478 546 450

FIG QC 100 SIZES 1-66SIZE 1-6 7-12 13-18 19-26 27-33 34-39 40-47 48-50 51-54 55-58 59-66

D 250 300 350 400 600 750 1100 1265 1265 1265 1620

E 150 220 295 330 390 440 525 525 525 525 640

F 180 215 270 325 405 495 685 685 685 685 760

G 115 120 135 150 180 225 280 345 345 345 455

H 180 215 270 325 405 495 610 710 710 710 760

J 135 140 160 175 215 270 330 405 405 405 560

K 150 150 150 200 200 200 250 300 300 300 300

L 105 120 155 190 235 290 355 340 340 340 380

M 55 65 75 95 115 145 198 250 250 250 280

N 55 65 75 95 115 145 180 190 190 190 215

P 33 38 65 66 83 100 TBLE 182 182 182 TBLE

Q1 130 160 205 45 305 370 450 545 545 545 580

R 15 20 25 30 35 40 50 60 70 80 80

S 140 155 190 240 300 365 455 480 480 480 560

T 10 12 12 20 25 30 40 40 40 40 40

U 40 50 70 80 100 130 150 200 200 200 200

V 60 60 65 70 75 75 90 140 140 140 150

X 35 35 50 50 65 75 90 110 110 110 120

Y 215 220 255 280 320 425 480 745 745 745 855

Z 165 180 209 220 269 347 411 530 530 530 700

AA 6 6 8 8 10 10 15 20 20 20 25

BB 14 18 22 22 22 27 33 45 45 45 51

‘W’ DIMENSION FOR BOLT SIZE ‘A’SIZE M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72 M80 M90

W 25 25 30 35 40 50 60 65 80 85 100 110 120

‘P’ DIMENSIONSIZE 40-44 45-47 59 60 61 62 63 64 65 66

P 121 165 188 193 197 203 207 211 216 220


60 20 361 451 386 80 205

70 20 354 444 379 94 205

80 20 347 437 372 107 205

90 16 340 430 365 120 205

100 16 332 422 357 133 205

110 16 325 415 350 147 205

120 16 318 408 343 160 205

130 16 310 400 335 174 205

140 16 303 393 328 187 205

150 16 296 386 321 200 205

160 12 288 378 313 213 205

170 12 281 371 306 227 205

180 12 274 364 299 240 205

190 12 267 358 292 253 205

200 12 260 350 285 266 205

210 12 253 343 278 280 205

220 12 245 335 270 293 205

230 12 239 329 264 306 205

240 12 231 321 256 320 205

250 12 233 313 258 333 215

260 12 226 306 251 346 215


110 80 780 980 840 147 545

120 72 773 973 833 160 545

130 72 765 965 825 174 545

140 72 758 958 818 187 545

150 64 751 951 811 200 545

160 64 743 943 803 213 545

170 64 736 936 796 227 545

180 64 729 929 789 240 545

190 64 722 922 782 253 545

200 56 715 915 775 266 545

210 56 708 908 768 280 545

220 56 700 900 760 293 545

230 56 693 893 753 306 545

240 56 686 886 746 320 545

250 56 679 879 739 333 545

260 56 672 872 732 346 545

270 48 664 864 724 360 545

280 48 656 856 716 373 545

290 48 650 850 710 386 545

300 48 643 843 703 399 545

310 48 635 835 695 413 545

320 48 628 828 688 426 545

330 48 621 821 681 439 545

340 48 613 813 673 453 545350 48 606 806 666 466 545360 42 599 799 659 479 545370 42 591 791 651 493 545380 42 584 784 644 506 545390 42 577 777 637 519 545400 42 570 770 630 532 545

410 42 563 763 623 546 545


110 80 770 980 840 147 545

120 72 763 973 833 160 545

130 72 755 965 825 174 545

140 72 748 958 818 187 545

150 64 741 951 811 200 545

160 64 734 943 803 213 545

170 64 726 936 796 227 545

180 64 719 929 789 240 545

190 64 712 922 782 253 545

200 56 705 915 775 266 545

210 56 698 908 768 280 545

220 56 690 900 760 293 545

230 56 683 893 753 306 545

240 56 676 886 746 320 545

250 56 669 879 739 333 545

260 56 662 872 732 346 545

270 48 654 864 724 360 545

280 48 646 856 716 373 545

290 48 640 850 710 386 545

300 48 633 843 703 399 545

310 48 625 835 695 413 545

320 48 618 828 688 426 545

330 48 611 821 681 439 545

340 48 603 813 673 453 545

350 48 596 806 666 466 545360 42 589 799 659 479 545370 42 581 791 651 493 545380 42 574 784 644 506 545390 42 567 777 637 519 545400 42 560 770 630 532 545

410 42 553 763 623 546 545


110 80 760 980 840 147 545

120 72 753 973 833 160 545

130 72 745 965 825 174 545

140 72 738 958 818 187 545

150 64 731 951 811 200 545

160 64 724 943 803 213 545

170 64 716 936 796 227 545

180 64 709 929 789 240 545

190 64 702 922 782 253 545

200 56 695 915 775 266 545

210 56 688 908 768 280 545

220 56 680 900 760 293 545

230 56 673 893 753 306 545

240 56 666 886 746 320 545

250 56 659 879 739 333 545

260 56 652 872 732 346 545

270 48 644 864 724 360 545

280 48 636 856 716 373 545

290 48 630 850 710 386 545

300 48 623 843 703 399 545

310 48 615 835 695 413 545

320 48 608 828 688 426 545

330 48 601 821 681 439 545340 48 593 813 673 453 545350 48 586 806 666 466 545360 42 579 799 659 479 545370 42 571 791 651 493 545380 42 564 784 644 506 545390 42 557 777 637 519 545400 42 550 770 630 532 545

410 42 543 763 623 546 545


150 80 766 996 846 200 580

160 80 759 989 839 213 580

170 80 751 981 831 227 580

180 80 744 974 824 240 580

190 72 737 967 817 253 580

200 72 730 960 810 266 580

210 72 723 953 803 280 580

220 72 715 945 795 293 580

230 72 708 938 788 306 580

240 64 701 931 781 320 580

250 64 694 924 774 333 580

260 64 687 917 767 346 580

270 64 679 909 759 360 580

280 64 672 902 752 373 580

290 64 665 895 745 386 580

300 64 658 888 738 399 580

310 64 650 880 730 413 580

320 56 643 873 723 426 580

330 56 636 866 716 439 580340 56 628 858 708 453 580350 56 621 851 701 466 580360 56 614 844 694 479 580370 56 606 836 686 493 580380 56 599 829 679 506 580390 56 592 822 672 519 580400 56 585 815 665 532 580

410 56 578 808 658 546 580


150 90 766 996 846 200 580

160 90 759 989 839 213 580

170 90 751 981 831 227 580

180 80 744 974 824 240 580

190 80 737 967 817 253 580

200 80 730 960 810 266 580

210 80 723 953 803 280 580

220 80 715 945 795 293 580

230 72 708 938 788 306 580

240 72 701 931 781 320 580

250 72 694 924 774 333 580

260 72 687 917 767 346 580

270 72 679 909 759 360 580

280 72 672 902 752 373 580

290 64 665 895 745 386 580

300 64 658 888 738 399 580

310 64 650 880 730 413 580

320 64 643 873 723 426 580330 64 636 866 716 439 580340 64 628 858 708 453 580350 64 621 851 701 466 580360 64 614 844 694 479 580370 64 606 836 686 493 580380 56 599 829 679 506 580390 56 592 822 672 519 580400 56 585 815 665 532 580

410 56 578 808 658 546 580


Page 14

THE ROD TAKE OUT (R.T.O.) DIMENSIONS B, B1 OR B3ARE GIVEN FOR THE LOAD ARM IN THE HIGH POSI-TION. WHEN THE LOAD ARM IS SET IN THE LOW POSI-TION, THE TOTAL UP TRAVEL MUST BE ADDED TODIMENSIONS B, B1 OR B3

TYPE ‘D’ ONLYTHE ROD TAKE OUT B2 IS GIVEN FOR THE LOAD ARMIN THE HIGH POSITION. WHEN THE LOAD ARM IS SETIN THE LOW POSITION, THE TOTAL UP TRAVEL MUSTBE SUBTRACTED FROM DIMENSION B2.

QC 110 A

QC 110 B QC 110 BX

QC 110 BY QC 110 C

QC 110 D QC 110 E

Page 15


SIZES 1-6TRAVEL A B B1 B2 B3 C DD

60 12 355 395 130 370 80 64

70 12 350 390 135 370 94 64

80 12 340 380 145 355 107 86

90 12 335 375 150 350 120 97

100 12 330 365 160 345 133 107

110 12 320 360 165 335 147 118

120 12 315 355 175 330 160 128

130 12 305 345 180 320 174 140

140 12 300 340 185 315 187 150

150 12 290 330 195 305 200 161

160 12 285 325 200 300 213 172

170 12 275 315 210 290 227 182

180 12 270 310 215 285 240 193

190 12 260 300 225 275 253 203

200 12 255 295 230 270 266

210 12 250 290 240 265 280


170 64 695 835 1060 755 227 186

180 64 690 830 1065 750 240 197

190 64 680 820 1075 740 253 209

200 56 675 815 1080 735 266 220

210 56 670 810 1085 730 280 231

220 56 660 800 1095 720 293 242

230 56 655 795 1100 715 306 252

240 56 645 785 1110 705 320 263

250 56 640 780 1115 700 333 275

260 56 630 770 1125 690 346 285

270 48 625 765 1130 685 360 296

280 48 615 755 1140 675 373 308

290 48 610 750 1145 670 386 318

300 48 600 740 1155 660 399 328

310 48 595 735 1160 655 413 340

320 48 590 730 1170 650 426 351

330 48 580 720 1175 640 439 362

340 48 575 715 1180 635 453 373

350 48 565 705 1190 625 466 384

360 42 560 700 1195 620 479 395

370 42 550 690 1205 610 493 405

380 42 545 685 1210 605 506 416

390 42 535 675 1220 595 519 427

400 42 530 670 1225 590 532 439

410 42 520 660 1235 580 546 450


170 64 695 835 1060 765 227 186

180 64 690 830 1065 760 240 197

190 64 680 820 1075 750 253 209

200 56 675 815 1080 745 266 220

210 56 670 810 1085 740 280 231

220 56 660 800 1095 730 293 242

230 56 655 795 1100 725 306 252

240 56 645 785 1110 715 320 263

250 56 640 780 1115 710 333 275

260 56 630 770 1125 700 346 285

270 48 625 765 1130 695 360 296

280 48 615 755 1140 685 373 308

290 48 610 750 1145 680 386 318

300 48 600 740 1155 670 399 328

310 48 595 735 1160 665 413 340

320 48 590 730 1170 660 426 351

330 48 580 720 1175 650 439 362

340 48 575 715 1180 645 453 373

350 48 565 705 1190 635 466 384

360 42 560 700 1195 630 479 395

370 42 550 690 1205 620 493 406

380 42 545 685 1210 615 506 416

390 42 535 675 1220 605 519 427

400 42 530 670 1225 600 532 439

410 42 520 660 1235 590 546 450


180 72 690 830 1615 770 240 197

190 72 680 820 1625 760 253 209

200 64 675 815 1630 755 266 220

210 64 670 810 1635 750 280 231

220 64 660 800 1645 740 293 242

230 64 655 795 1650 735 306 252

240 64 645 785 1660 725 320 263

250 64 640 780 1665 720 333 275

260 56 630 770 1675 710 346 285

270 56 625 765 1680 705 360 296

280 56 615 755 1690 695 373 308

290 56 610 750 1695 690 386 318

300 56 600 740 1705 680 399 328

310 56 595 735 1710 675 413 340

320 56 590 730 1720 670 426 351

330 56 580 720 1725 660 439 362

340 56 575 715 1730 655 453 373

350 56 565 705 1740 645 466 384

360 48 560 700 1745 640 479 395

370 48 550 690 1755 630 493 406

380 48 545 685 1760 625 506 416

390 48 535 675 1770 615 519 427

400 48 530 670 1775 610 532 439

410 48 520 660 1785 600 546 450

SIZES 59-62TRAVEL A B B1 B3 C

180 80 745 975 825 240

190 72 740 970 820 253

200 72 730 960 810 266

210 72 725 955 805 280

220 72 715 945 795 293

230 72 710 940 790 306

240 64 700 930 780 320

250 64 695 925 775 333

260 64 685 915 765 346

270 64 680 910 760 360

280 64 670 900 750 373

290 64 665 895 745 386

300 64 660 890 740 399

310 64 650 880 730 413

320 56 645 875 725 426

330 56 636 865 715 439

340 56 630 860 710 453

350 56 620 850 700 466

360 56 615 845 695 479

370 56 605 835 685 493

380 56 600 830 680 506

390 56 595 825 675 519

400 56 585 815 665 532

410 56 580 810 660 546

SIZES 63-66TRAVEL A B B1 B3 C

180 80 745 975 825 240

190 72 740 970 820 253

200 72 730 960 810 266

210 72 725 955 805 280

220 72 715 945 795 293

230 72 710 940 790 306

240 64 700 930 780 320

250 64 695 925 775 333

260 64 685 915 765 346

270 64 680 910 760 360

280 64 670 900 750 373

290 64 665 895 745 386

300 64 660 890 740 399

310 64 650 880 730 413

320 56 645 875 725 426

330 56 636 865 715 439

340 56 630 860 710 453

350 56 620 850 700 466

360 56 615 845 695 479

370 56 605 835 685 493

380 56 600 830 680 506

390 56 595 825 675 519

400 56 585 815 665 532

410 56 580 810 660 546

FIG QC 110 SIZES 1-66SIZE 1-6 7-12 13-18 19-26 27-33 34-39 40-47 48-50 51-54 55-58 59-66

D 250 300 350 400 600 750 1100 1265 1265 1265 1620

E 150 220 295 330 390 440 525 525 525 525 640

F 295 330 455 550 615 815 945 1080 1080 1080 1100

G 115 120 135 150 180 225 280 345 345 345 455

H 255 240 290 390 405 535 610 680 680 680 820

J 135 140 160 175 215 270 330 405 405 405 560

K 150 150 150 200 200 200 250 300 300 300 300

L 150 155 225 260 285 400 430 460 460 460 430

M 55 65 75 95 115 145 180 190 190 190 215

N 55 65 75 95 115 145 198 250 250 250 280

P 33 38 65 66 83 100 TBLE 182 182 182 TBLE

Q 175 180 225 310 295 420 425 445 445 445 580

R 15 20 30 30 35 40 50 60 70 80 80

S 130 125 195 220 240 355 370 365 365 365 500

T 10 12 12 20 25 25 30 40 40 40 40

U 40 50 70 80 100 130 150 200 200 200 200

V 40 40 50 65 75 75 90 140 140 140 150

X 35 35 50 50 65 75 90 110 110 110 120

Y 215 220 255 280 320 425 480 745 745 745 855

Z 165 180 209 220 269 347 411 530 530 530 700

AA 6 6 8 8 10 10 15 20 20 20 25

BB 14 18 22 22 22 27 33 45 45 45 51

CC 180 215 270 325 405 495 610 685 685 685 760

EE 220 305 420 460 585 610 840 930 930 930

FF 210 280 330 420 485 560 660 660 660 660

GG 180 255 370 395 510 510 740 830 830 830

HH 170 230 280 355 410 460 560 560 560 560

JJ 102 127 203 254 305 305 381 381 381 381

KK 80 100 170 180 230 240 360 360 360 360

LL 100 130 190 215 255 285 360 455 504 475


90 12 340 380 215 360 120 96

100 12 330 370 220 350 133 107

110 12 325 365 230 345 147 117

120 12 320 360 235 340 160 128

130 12 310 350 245 330 174 139

140 12 305 345 250 325 187 150

150 12 295 335 260 315 200 160

160 12 290 330 265 310 213 171

170 12 280 320 270 300 227 181

180 12 275 315 280 295 240 192

190 12 270 310 285 290 253 204

200 12 260 300 295 280 266

210 12 255 295 300 275 280


100 16 375 425 280 400 133 105

110 16 370 420 290 395 147 116

120 16 365 415 295 390 160 126

130 16 355 405 305 380 174 138

140 16 350 400 310 375 187 148

150 16 340 390 315 365 200 158

160 12 335 385 325 360 213 169

170 12 325 375 330 350 227 179

180 12 320 370 340 345 240 189

190 12 310 360 345 335 253 200

200 12 305 355 355 330 266 211

210 12 300 350 360 325 280 221

220 12 290 340 370 315 293

230 12 285 335 375 310 306

240 12 275 325 380 300 320

250 12 270 320 390 295 333

260 12 260 310 395 285 346


120 20 500 565 315 530 160 129

130 20 490 555 325 520 174 141

140 20 485 550 330 515 187 152

150 20 475 540 335 505 200 162

160 20 470 535 345 500 213 173

170 20 460 525 350 490 227 184

180 16 455 520 360 485 240 195

190 16 445 510 365 475 253 206

200 16 440 505 375 470 266 217

210 16 435 500 380 465 280 227

220 16 425 490 390 455 293 239

230 16 420 480 395 450 306 249

240 16 410 475 400 440 320 259

250 16 405 470 410 435 333 271

260 16 395 460 415 425 346 282

270 16 390 455 425 420 360 292

280 16 380 445 430 410 373 304

290 16 375 440 440 405 386 315

300 16 365 430 445 395 399

310 16 360 425 455 390 413

320 16 355 420 460 385 426

330 12 345 410 470 275 439

340 12 340 405 475 370 453

350 12 330 395 480 360 466

360 12 325 390 490 355 479


130 30 475 550 545 510 174 142

140 30 470 545 550 505 187 153

150 30 460 535 560 495 200 164

160 30 455 530 570 490 213 175

170 24 445 520 575 480 227 185

180 24 440 515 580 475 240 196

190 24 430 505 590 465 253 208

200 24 425 500 595 460 266 219

210 24 420 495 605 455 280 230

220 24 410 485 610 445 293 241

230 24 405 480 620 440 306 251

240 20 395 470 625 430 320 262

250 20 390 465 635 425 333 273

260 20 380 455 640 415 346 284

270 20 375 450 645 410 360 295

280 20 365 440 655 400 373 306

290 20 360 435 660 395 386 317

300 20 350 425 670 385 399 327

310 20 345 420 675 380 413

320 20 340 415 685 375 426

330 20 330 405 690 365 439

340 20 325 400 700 360 453

350 20 315 390 705 350 466

360 20 310 385 710 345 479


170 36 570 645 750 610 227 187

180 36 565 640 760 605 240 197

190 30 555 630 765 595 253 209

200 30 550 625 770 590 266 220

210 30 545 620 780 585 280 230

220 30 535 610 785 575 293 242

230 30 530 605 790 570 306 252

240 30 520 595 800 560 320 262

250 30 515 590 810 555 333 274

260 30 505 580 815 545 346 285

270 30 500 575 825 540 360 296

280 30 490 565 830 530 373 307

290 30 485 560 840 525 386 318

300 30 475 550 845 515 399 328

310 24 470 545 850 510 413 340

320 24 465 540 860 505 426 351

330 24 455 530 870 495 439 361

340 24 450 525 875 490 453 373

350 24 440 515 880 480 466 384

360 24 435 510 890 475 479 394

370 24 425 500 895 465 493 405

380 24 420 495 905 460 506 416

390 24 410 485 910 450 519 427

400 24 405 480 920 445 532 439

410 24 395 470 925 435 546 449


170 48 645 735 1115 695 227 187

180 48 640 730 1120 690 240 198

190 48 630 720 1130 680 253 210

200 42 625 715 1135 675 266 220

210 42 615 705 1145 665 280 231

220 42 610 700 1150 660 293 243

230 42 605 695 1160 655 306 253

240 42 595 685 1165 645 320 264

250 42 590 680 1175 640 333 275

260 42 580 670 1180 630 346 286

270 36 575 665 1185 625 360 297

280 36 565 655 1195 615 373 308

290 36 560 650 1200 610 386 319

300 36 550 640 1210 600 399 329

310 36 545 635 1215 595 413 341

320 36 540 630 1225 590 426 352

330 36 530 620 1230 580 439 363

340 36 525 615 1240 575 453 375

350 36 515 605 1245 565 466 386

360 36 510 600 1250 560 479 396

370 36 500 590 1260 550 493 407

380 30 495 585 1270 545 506 418

390 30 485 575 1275 535 519 429

400 30 480 570 1280 530 532 441

410 30 470 560 1290 520 546 451

‘P’ DIMENSIONSIZE 40-44 45-47 59 60 61 62 63 64 65 66

P 121 165 188 193 197 203 207 211 216 220


W 25 25 30 35 40 50 60 65 80 85 100 110 120YOKE TABLE

SIZE TRAVELS

48-58 170-410

59-66 180-410

ALL UNITS ARE SUPPLIED WITH DROPRODS AND TURNBUCKLES, EXCEPT FORSIZES/TRAVELS SHOWN IN THE TABLEBELOW, WHICH WILL BE SUPPLIED WITHYOKE ARRANGEMENT. SEE FIG QC 120FOR YOKE DETAILS. (PAGE 12)


Page 16

THE ROD TAKE OUT(R.T.O) DIMENSIONS B, B1OR B2 ARE GIVEN FORTHE LOAD ARM IN THEHIGH POSITION. WHENTHE LOAD ARM IS SET INTHE LOW POSITION, THER.T.O. WILL EQUAL THETOTAL UP TRAVEL PLUSDIM’N B OR B1, OR TOTALUP TRAVEL MINUS DIM’NB2

ON CERTAIN SIZES/TRAVELS IT IS NECESSARY TOINCLUDE THE YOKE ARRANGEMENT. SEE ADJACENTTABLES FOR WHEN YOKE IS APPLICABLE, AND ITSRELEVANT DIMENSIONS.

QC 120 B QC 120 C

QC 120 D

YOKE ARRANGEMENT

Page 17


ALL UNITS ARE SUPPLIED WITH DROP RODS ANDTURNBUCKLES, EXCEPT FOR SIZES/TRAVELS SHOWNIN THE ADJACENT TABLE, WHICH WILL BE SUPPLIEDWITH YOKE ARRANGEMENT. SEE PAGE 12 FOR YOKEDETAILS.

SIZES 48-54TRAVEL A B B2 C DD NN

150 64 2167 55 200 164 465

160 64 2159 60 213 175 465

170 64 2152 70 227 186 465

180 64 2145 75 240 197 465

190 64 2138 85 253 209 465

200 56 2131 90 266 220 465

210 56 2124 95 280 231 465

220 56 2116 105 293 242 465

230 56 2109 110 306 252 465

240 56 2102 120 320 263 465

250 56 2094 125 333 275 465

260 56 2087 135 346 285 465

270 48 2080 140 360 296 465

280 48 2072 150 373 308 465

290 48 2065 155 386 318 465

300 48 2058 165 399 328 465

310 48 2051 170 413 340 465

320 48 2043 180 426 351 465

330 48 2036 185 439 362 465

340 48 2029 190 453 373 465

350 48 2022 200 466 384 475

360 42 2015 205 479 395 485

370 42 2007 215 493 406 495

380 42 2000 220 506 416 520

390 42 1993 230 519 427 525

400 42 1985 235 532 439 535

410 42 1978 245 546 450 545


170 72 2152 70 227 186 465

180 72 2145 75 240 197 465

190 72 2138 85 253 109 465

200 64 2131 90 266 220 465

210 64 2124 100 280 231 465

220 64 2116 105 293 242 465

230 64 2109 110 306 252 465

240 64 2102 120 320 263 465

250 64 2094 125 333 275 465

260 56 2087 135 346 285 465

270 56 2080 140 360 296 465

280 56 2072 150 373 308 465

290 56 2065 155 386 318 465

300 56 2058 165 399 328 465

310 56 2051 170 413 340 465

320 56 2043 180 426 351 465

330 56 2036 185 439 362 465

340 56 2029 190 453 373 465

350 56 2022 200 466 384 475

360 48 2015 205 479 395 485

370 48 2007 215 493 406 495

380 48 2000 220 506 416 520

390 48 1993 230 519 427 525

400 48 1985 235 532 439 535

410 48 1978 245 546 450 545


180 80 2560 75 240 197 530

190 72 2553 85 253 209 530

200 72 2546 90 266 220 530

210 72 2539 95 280 231 530

220 72 2531 105 293 242 530

230 72 2524 110 306 252 530

240 64 2517 120 320 263 530

250 64 2509 125 333 275 530

260 64 2502 135 346 285 530

270 64 2495 140 360 296 530

280 64 2487 150 373 308 530

290 64 2480 155 386 318 530

300 64 2473 165 399 328 530

310 64 2466 170 413 340 530

320 56 2458 175 426 351 530

330 56 2451 185 439 362 530

340 56 2444 190 453 373 530

350 56 2437 200 466 384 530

360 56 2430 205 479 395 530

370 56 2422 215 493 406 530

380 56 2415 220 506 416 530

390 56 2408 225 519 427 530

400 56 2400 235 532 439 530

410 56 2393 240 546 450 530


180 80 2560 75 240 197 530

190 80 2553 80 253 209 530

200 80 2546 90 266 220 530

210 80 2539 95 280 231 530

220 80 2531 105 293 242 530

230 72 2524 110 306 252 530

240 72 2517 120 320 263 530

250 72 2509 125 333 275 530

260 72 2502 135 346 285 530

270 72 2495 140 360 296 530

280 72 2487 150 373 308 530

290 64 2480 155 386 318 530

300 64 2473 160 399 328 530

310 64 2466 170 413 340 530

320 64 2458 175 426 351 530

330 64 2451 185 439 362 530

340 64 2444 190 453 373 530

350 64 2437 200 466 384 530

360 64 2430 205 479 395 530

370 64 2422 215 493 406 530

380 56 2415 220 506 416 530

390 56 2408 225 519 427 530

400 56 2400 235 532 439 530

410 56 2393 240 546 450 530

SIZES 19-26TRAVEL A B B1 B2 C DD NN

70 30 920 115 94 76 230

80 24 910 105 107 87 230

90 24 905 100 120 97 230

100 24 895 90 133 108 230

110 24 890 85 147 119 230

120 20 885 78 160 129 230

130 20 875 70 174 141 230

140 20 870 65 187 152 230

150 20 860 55 200 162 230

160 20 855 50 213 173 230

170 20 845 40 227 184 230

180 16 840 35 240 195 230

190 16 830 30 253 206 235

200 16 825 20 266 217 245

210 16 820 15 280 227 255

220 16 810 5 293 239 270

230 16 805 306 249 280

240 16 795 10 320 259 290

250 16 790 15 333 271 300

260 16 780 25 346 282 310

270 16 775 30 360 292 320

280 16 765 40 373 304 335

290 16 760 45 386 315 345

300 16 750 55 399 324 355

310 16 745 60 413 336 365

320 16 740 70 426 347 375

330 12 730 75 439 357 385

340 12 725 80 453 369 400

350 12 715 90 466 380 410

360 12 710 95 479 390 420


100 42 1380 45 133 110 345

110 42 1370 40 147 121 345

120 42 1365 35 160 131 345

130 42 1355 25 174 143 345

140 36 1350 20 187 154 345

150 36 1345 10 200 165 345

160 36 1335 5 213 176 345

170 36 1330 5 227 187 345

180 36 1320 10 240 197 345

190 30 1315 20 253 209 345

200 30 1305 25 266 220 345

210 30 1300 35 280 230 345

220 30 1290 40 293 242 345

230 30 1295 45 306 252 345

240 30 1285 55 320 262 345

250 30 1270 60 333 274 345

260 30 1265 70 346 285 355

270 30 1255 75 360 296 360

280 30 1250 85 373 307 370

290 30 1240 90 386 318 380

300 30 1235 100 399 328 390

310 24 1225 105 413 340 405

320 24 1220 115 426 351 415

330 24 1210 120 439 361 420

340 24 1205 125 453 373 430

350 24 1200 135 466 384 445

360 24 1190 140 479 394 455

370 24 1185 150 493 405 465

380 24 1175 155 506 416 485

390 24 1170 165 519 427 485

400 24 1160 170 532 439 500

410 24 1155 180 546 449 515


120 56 1855 50 160 132 395

130 56 1850 40 174 144 395

140 56 1840 35 187 154 395

150 48 1835 25 200 165 395

160 48 1825 20 213 176 395

170 48 1820 10 227 187 395

180 48 1810 5 240 198 395

190 48 1805 5 253 210 395

200 42 1795 10 266 220 395

210 42 1790 20 280 231 395

220 42 1780 25 293 243 395

230 42 1775 35 306 253 395

240 42 1770 40 320 264 395

250 42 1760 50 333 275 395

260 42 1755 55 346 286 395

270 36 1745 60 360 297 395

280 36 1740 70 373 308 395

290 36 1730 75 386 319 395

300 36 1725 85 399 329 395

310 36 1715 90 413 341 405

320 36 1710 100 426 352 415

330 36 1700 105 439 363 425

340 36 1695 110 453 375 435

350 36 1690 120 466 386 450

360 36 1680 125 479 396 455

370 36 1675 135 493 407 465

380 30 1665 140 506 416 485

390 30 1660 150 519 429 495

400 30 1650 155 532 441 500

410 30 1645 165 546 451 515


80 36 1180 85 107 88 275

90 36 1175 80 120 99 275

100 36 1165 70 133 109 275

110 30 1160 65 147 120 275

120 30 1155 60 160 131 275

130 30 1145 50 174 142 275

140 30 1140 45 187 153 275

150 30 1130 35 200 164 275

160 30 1125 30 213 175 275

170 24 1115 20 227 185 275

180 24 1110 15 240 196 275

190 24 1100 10 253 208 275

200 24 1095 266 219 275

210 24 1090 10 280 230 275

220 24 1080 15 293 241 275

230 24 1075 20 306 251 285

240 20 1065 30 320 262 295

250 20 1060 35 333 273 310

260 20 1050 45 346 284 315

270 20 1045 50 360 295 330

280 20 1035 60 373 306 335

290 20 1030 65 386 317 345

300 20 1020 70 399 327 355

310 20 1015 80 413 339 370

320 20 1010 90 426 350 380

330 20 1000 95 439 361 390

340 20 995 100 453 372 395

350 20 985 110 466 383 415

360 20 980 115 479 394 420

‘P’ DIMENSIONSIZE 40-44 45-47 59 60 61 62 63 64 65 66

P 121 165 188 193 197 203 207 211 216 220


W 25 25 30 35 40 50 60 65 80 85 100 110 120

YOKE TABLESIZE 1-6 7-12 13-18 19-26 27-33 34-39 40-47 48-54 55-58 59-66

TRAVEL 40-100 40-120 60-150 70-180 80-200 100-250 120-320 150-410 170-410 180-410

FIG QC 120 SIZES 1-66SIZE 1-6 7-12 13-18 19-26 27-33 34-39 40-47 48-50 51-54 55-58 59-66

D 250 300 350 400 600 750 1100 1265 1265 1265 1620

E 150 220 295 330 390 440 525 525 525 525 640

F 180 215 270 325 405 495 610 710 710 710 760

G 115 120 135 150 180 225 280 345 345 345 455

H 180 215 270 325 405 495 610 685 685 685 760

J 135 140 160 175 215 270 330 405 405 405 560

K 150 150 150 200 200 200 250 300 300 300 300

L 105 120 155 190 235 290 355 340 340 340 380

M 55 65 75 95 115 145 180 250 250 250 280

N 55 65 75 95 115 145 180 190 190 190 215

P 33 38 65 66 83 100 TBLE 182 182 182 TBLE

S 140 155 190 240 300 365 455 480 480 480 560

T 10 12 12 20 25 30 40 40 40 40 40

V 40 40 50 65 75 75 90 140 140 140 150

X 35 35 50 50 65 75 90 110 110 110 120

Y 215 220 255 280 320 425 480 745 745 745 855

Z 165 180 209 220 269 347 411 530 530 530 700

AA 6 6 8 8 10 10 15 20 20 20 25

BB 14 18 22 22 22 27 33 45 45 45 51

MM 65 80 90 110 130 155 190 320 320 320 320

PP 125 155 170 190 205 225 245 275 290 290 340

QQ 95 102 112 123 153 190 231 288 288 288 390

RR 40 50 65 80 90 110 130 150 160 160 220


60 20 770 90 80 63 200

70 20 765 85 94 75 200

80 20 760 75 107 85 200

90 16 750 70 120 95 200

100 16 745 60 133 105 200

110 16 735 55 147 116 200

120 16 730 50 160 126 200

130 16 720 40 174 138 200

140 16 715 35 187 148 200

150 16 705 25 200 158 200

160 12 700 20 213 169 200

170 12 690 10 227 179 215

180 12 685 5 240 189 220

190 12 680 5 253 200 230

200 12 670 10 266 211 240

210 12 665 20 280 221 255

220 12 655 25 293 232 265

230 12 650 30 306 242 275

240 12 640 40 320 253 285

250 12 635 45 333 264 295

260 12 630 55 346 274 305


40 12 610 130 54 42 105

50 12 600 125 67 53 105

60 12 595 115 80 64 105

70 12 590 110 94 76 110

80 12 580 105 107 86 115

90 12 575 95 120 97 130

100 12 560 90 133 107 130

110 12 560 80 147 118 140

120 12 550 75 160 128 155

130 12 545 65 174 140 160

140 12 540 60 187 150 175

150 12 530 50 200 161 180

160 12 520 45 213 172 195

170 12 515 35 227 182 210

180 12 510 30 240 193 215

190 12 500 25 253 203 230

200 12 495 15 266 214 235

210 12 490 10 280 225 250


40 20 685 115 54 41 150

50 16 680 110 67 52 150

60 16 670 100 80 63 150

70 16 665 95 94 75 150

80 12 655 90 107 85 150

90 12 650 80 120 96 150

100 12 640 70 133 107 150

110 12 635 65 147 117 150

120 12 630 60 160 128 160

130 12 620 50 174 139 170

140 12 610 45 187 150 180

150 12 605 35 200 160 190

160 12 595 30 213 171 200

170 12 590 20 227 181 215

180 12 585 15 240 192 220

190 12 575 10 253 202 235

200 12 570 266 214 245

210 12 560 10 280 225 255


Page 18

QC 130 DLONG TRAVEL

QC 130 DSHORT TRAVEL

THE ROD TAKE OUT (R.T.O.) DIMENSIONS BAND B1 ARE GIVEN FOR THE LOAD ARM INTHE HIGH POSITION. WHEN THE LOAD ARMIS SET IN THE LOW POSITION, THE R.T.O.WILL EQUAL THE TOTAL UP TRAVEL PLUSDIMENSION B, OR TOTAL UP TRAVEL MINUSDIM’N B1.

Page 19


DIMENSIONS

‘P’ DIMENSIONSIZE 40-44 45-47 59 60 61 62 63 64 65 66

P 121 165 188 193 197 203 207 211 216 220

SIZES 1-6TRAVEL A B B1 C

40 12 130 54

50 12 125 67

60 12 115 80

70 12 110 94

80 12 105 107

90 12 95 120

100 12 90 133

110 12 80 147

120 12 75 160

130 12 65 174

140 12 60 187

150 12 50 200

160 12 45 213

170 12 35 227

180 12 30 240

190 12 25 253

200 12 15 266

210 12 10 280


110 56 55 147

120 56 50 160

130 56 40 174

140 56 35 187

150 48 25 200

160 48 20 213

170 48 10 227

180 48 5 240

190 48 5 253

200 42 10 266

210 42 20 280

220 42 25 293

230 42 35 306

240 42 40 320

250 42 50 333

260 42 55 346

270 36 60 360

280 36 70 373

290 36 75 386

300 36 85 399

310 36 90 413

320 36 100 426

330 36 105 439

340 36 110 453

350 36 120 466

360 36 125 479

370 36 135 493

380 30 140 506

390 30 150 519

400 30 155 532

410 30 165 546


90 48 55 120

100 42 45 133

110 42 40 147

120 42 35 160

130 42 25 174

140 36 20 187

150 36 10 200

160 36 5 213

170 36 5 227

180 36 10 240

190 30 20 253

200 30 25 266

210 30 35 280

220 30 40 293

230 30 45 306

240 30 55 320

250 30 60 333

260 30 70 346

270 30 75 360

280 30 85 373

290 30 90 386

300 30 100 399

310 24 105 413

320 24 115 426

330 24 120 439

340 24 125 453

350 24 135 466

360 24 140 479

370 24 150 493

380 24 155 506

390 24 165 519

400 24 170 532

410 24 180 546


70 36 95 94

80 36 85 107

90 36 80 120

100 36 70 133

110 30 65 147

120 30 60 160

130 30 50 174

140 30 45 187

150 30 35 200

160 30 30 213

170 24 20 227

180 24 15 240

190 24 10 253

200 24 0 0 266

210 24 10 280

220 24 15 293

230 24 20 306

240 20 30 320

250 20 35 333

260 20 45 346

270 20 50 360

280 20 60 373

290 20 65 386

300 20 70 399

310 20 80 413

320 20 90 426

330 20 95 439

340 20 100 453

350 20 110 466

360 20 115 479


60 30 120 80

70 30 115 94

80 24 105 107

90 24 100 120

100 24 90 133

110 24 85 147

120 20 80 160

130 20 70 174

140 20 65 187

150 20 55 200

160 20 50 213

170 20 40 227

180 16 35 240

190 16 30 253

200 16 20 266

210 16 15 280

220 16 5 293

230 16 0 306

240 16 10 320

250 16 15 333

260 16 25 346

270 16 30 360

280 16 40 373

290 16 45 386

300 16 55 399

310 16 60 413

320 16 70 426

330 12 75 439

340 12 80 453

350 12 90 466

360 12 95 479

SIZES 48-54TRAVEL A B C

110 80 25 147

120 72 30 160

130 72 40 174

140 72 45 187

150 64 55 200

160 64 60 213

170 64 70 227

180 64 75 240

190 64 85 253

200 56 90 266

210 56 100 280

220 56 105 293

230 56 110 306

240 56 120 320

250 56 125 333

260 56 135 346

270 48 140 360

280 48 150 373

290 48 155 386

300 48 165 399

310 48 170 413

320 48 180 426

330 48 185 439

340 48 190 453

350 48 200 466

360 42 205 479

370 42 215 493

380 42 220 506

390 42 230 519

400 42 235 532

410 42 245 546


150 90 55 200

160 90 60 213

170 90 70 227

180 80 75 240

190 80 80 253

200 80 90 266

210 80 95 280

220 80 105 293

230 72 110 306

240 72 120 320

250 72 125 333

260 72 135 346

270 72 140 360

280 72 150 373

290 64 155 386

300 64 160 399

310 64 170 413

320 64 175 426

330 64 185 439

340 64 190 453

350 64 200 466

360 64 205 479

370 64 215 493

380 56 220 506

390 56 230 519

400 56 235 532

410 56 240 546


150 80 55 200

160 80 60 213

170 80 70 227

180 80 75 240

190 72 80 253

200 72 90 266

210 72 95 280

220 72 105 293

230 72 110 306

240 64 120 320

250 64 125 333

260 64 135 346

270 64 140 360

280 64 150 373

290 64 155 386

300 64 160 399

310 64 170 413

320 56 175 426

330 56 185 439

340 56 190 453

350 56 200 466

360 56 205 479

370 56 215 493

380 56 220 506

390 56 230 519

400 56 235 532

410 56 240 546


110 90 25 147

120 90 30 160

130 80 40 174

140 80 45 187

150 80 55 200

160 72 60 213

170 72 70 227

180 72 75 240

190 72 85 253

200 64 90 266

210 64 100 280

220 64 105 293

230 64 110 306

240 64 120 320

250 64 125 333

260 56 135 346

270 56 140 360

280 56 150 373

290 56 155 386

300 56 165 399

310 56 170 413

320 56 180 426

330 56 185 439

340 56 190 453

350 56 200 466

360 48 205 479

370 48 215 493

380 48 220 506

390 48 230 519

400 48 235 532

410 48 245 546


60 20 90 80

70 20 85 94

80 20 75 107

90 16 70 120

100 16 60 133

110 16 55 147

120 16 50 160

130 16 40 174

140 16 35 187

150 16 25 200

160 12 20 213

170 12 10 227

180 12 5 240

190 12 5 253

200 12 10 266

210 12 20 280

220 12 25 293

230 12 30 306

240 12 40 320

250 12 45 333

260 12 55 346


40 20 115 54

50 16 110 67

60 16 100 80

70 16 95 94

80 12 90 107

90 12 80 120

100 12 70 133

110 12 65 147

120 12 60 160

130 12 50 174

140 12 45 187

150 12 35 200

160 12 30 213

170 12 20 227

180 12 15 240

190 12 10 253

200 12 266

210 12 10 280

FIG QC 130 SIZES 1-66SIZE 1-6 7-12 13-18 19-26 27-33 34-39 40-47 48-50 51-54 55-58 59-66

D 250 300 350 400 600 750 1100 1265 1265 1265 1620

E 150 220 295 330 390 440 525 525 525 525 640

F 180 215 270 325 405 495 610 685 685 685 760

G 115 120 135 150 180 225 280 345 345 345 455

H 180 215 270 325 405 495 610 710 710 710 760

J 135 140 160 175 215 270 330 405 405 405 560

K 150 150 150 200 200 200 250 300 300 300 300

L 105 120 155 190 235 290 355 340 340 340 380

M 55 65 75 95 115 145 198 250 250 250 280

N 55 65 75 95 115 145 180 190 190 190 215

P 33 38 65 66 83 100 TBLE 182 182 182 TBLE

S 140 155 190 240 300 365 455 480 480 480 560

Y 215 220 255 270 320 425 480 745 745 745 855

Z 165 180 209 220 269 347 411 530 530 530 700

AA 6 6 8 8 10 10 15 20 20 20 25

BB 14 18 22 22 22 27 33 45 45 45 51

MM 65 80 100 110 130 155 190 320 320 320 320


Page 20

QC 140 F

THE TAKE OUT DIM’N B IS GIVEN FOR THELOAD ARM IN THE HIGH POSITION. WHENTHE LOAD ARM IS SET IN THE LOW POSITION,THE INSTALLED HEIGHT WILL BE DIM’N BMINUS THE UP TRAVEL.


Page 21

SIZES 1-6TRAVEL B C

40 325 54

50 330 67

60 340 80

70 345 94

80 355 107

90 360 120

100 370 133

110 375 147

120 380 160

130 390 174

140 400 187

150 405 200

160 410 213

170 420 227

180 425 240

190 435 253

200 440 266

210 450 280

SIZES 7-12TRAVEL B C

40 370 54

50 375 67

60 385 80

70 390 94

80 400 107

90 405 120

100 415 133

110 420 147

120 425 160

130 435 174

140 440 187

150 450 200

160 455 213

170 465 227

180 470 240

190 480 253

200 485 266

210 495 280


60 450 80

70 455 94

80 465 107

90 470 120

100 480 133

110 485 147

120 490 160

130 500 174

140 505 187

150 515 200

160 520 213

170 530 227

180 535 240

190 545 253

200 550 266

210 560 280

220 565 293

230 570 306

240 580 320

250 585 333

260 595 346


60 535 80

70 540 94

80 550 107

90 555 120

100 565 133

110 570 147

120 580 160

130 585 174

140 590 187

150 600 200

160 605 213

170 615 227

180 620 240

190 630 253

200 635 266

210 645 280

220 650 293

230 660 306

240 665 320

250 670 333

260 680 346

270 685 360

280 695 373290 700 386300 710 399310 715 413320 725 426330 730 439340 735 453350 745 466

360 750 479


70 670 94

80 680 107

90 685 120

100 695 133

110 700 147

120 705 160

130 715 174

140 720 187

150 730 200

160 735 213

170 745 227

180 750 240

190 760 253

200 765 266

210 775 280

220 780 293

230 785 306

240 795 320

250 800 333

260 810 346

270 815 360

280 825 373290 830 386300 835 399310 845 413320 855 426330 860 439340 865 453350 875 466

360 880 479


110 955 147

120 960 160

130 970 174

140 975 187

150 985 200

160 990 213

170 1000 227

180 1005 240

190 1015 253

200 1020 266

210 1025 280

220 1035 293

230 1040 306

240 1050 320

250 1055 333

260 1065 346

270 1070 360

280 1080 373

290 1085 386

300 1095 399

310 1100 413

320 1110 426

330 1115 439

340 1120 453

350 1130 466

360 1135 479

370 1145 493

380 1150 506

390 1160 515

400 1165 532

410 1175 546


90 830 120

100 840 133

110 845 147

120 850 160

130 860 174

140 865 187

150 875 200

160 880 213

170 890 227

180 895 240

190 905 253

200 910 266

210 920 280

220 925 293

230 930 306

240 940 320

250 945 333

260 955 346

270 960 360

280 970 373

290 975 386

300 985 399

310 990 413

320 1000 426330 1005 439340 1010 453350 1020 466360 1025 479370 1035 493380 1040 506390 1050 515400 1055 532

410 1065 546

FIG QC 140 SIZES 1-47SIZE 1-6 7-12 13-18 19-26 27-33 34-39 40-44 45-47

D 250 300 350 400 600 750 1100 1100

E 150 220 295 330 390 440 525 525

F 180 215 270 325 405 495 610 610

G 115 120 135 150 180 225 280 280

H 180 215 270 325 405 495 610 610

J 135 140 160 175 215 270 330 330

L 105 120 155 190 235 290 355 355

M 55 65 75 95 115 145 198 198

N 55 65 75 95 115 145 180 180

P 33 38 65 66 83 100 121 165

S 140 155 190 240 300 365 455 455

Y 215 220 255 270 320 425 480 480

Z 165 180 209 220 269 347 411 411

AA 6 6 8 8 10 10 15 15

BB 14 18 22 22 22 27 33 33

MM 65 80 100 110 130 155 190 190

SS 230 260 315 380 490 610 685 685

TT 105 120 155 190 240 295 390 390

UU 80 100 130 150 180 200 200 230

VV 75 95 120 145 175 195 225 225


Page 22

QC 150 F FOR TRAVELS UP TO 150 mm

FOR TRAVELS OVER 150 mm

THE TAKE OUT DIM’N B IS GIVEN FOR THELOAD ARM IN THE HIGH POSITION. WHENTHE LOAD ARM IS SET IN THE LOW POSI-TION, THE INSTALLED HEIGHT WILL BE DIM’NB MINUS THE UP TRAVEL.


Page 23

SIZES 1-6TRAVEL B C

40 570 54

50 580 67

60 585 80

70 595 94

80 600 107

90 605 120

100 615 133

110 620 147

120 630 160

130 640 174

140 645 187

150 650 200

160 660 213

170 665 227

180 670 240

190 680 253

200 685 266

210 695 280


40 660 54

50 670 67

60 675 80

70 685 94

80 690 107

90 695 120

100 705 133

110 710 147

120 720 160

130 725 174

140 735 187

150 740 200

160 750 213

170 755 227

180 760 240

190 770 253

200 775 266

210 785 280


60 790 80

70 800 94

80 805 107

90 815 150

100 820 133

110 830 147

120 835 160

130 845 174

140 850 187

150 855 200

160 865 213

170 870 227

180 880 240

190 885 253

200 895 266

210 900 280

220 910 293

230 915 306

240 920 320

250 930 333

260 935 346


60 925 80

70 935 94

80 940 107

90 950 120

100 955 133

110 965 147

120 970 160

130 980 174

140 985 187

150 990 200

160 1000 213

170 1005 227

180 1015 240

190 1020 253

200 1030 266

210 1035 280

220 1045 293

230 1050 306

240 1060 320

250 1065 333

260 1070 346

270 1080 360280 1085 373290 1095 386300 1100 399310 1110 413320 1115 426330 1125 439340 1130 453350 1140 466

360 1145 479


70 1265 94

80 1275 107

90 1280 120

100 1290 133

110 1295 147

120 1300 160

130 1310 174

140 1315 187

150 1325 200

160 1330 213

170 1340 227

180 1345 240

190 1355 253

200 1360 266

210 1370 280

220 1375 293

230 1380 306

240 1390 320

250 1395 333

260 1405 346

270 1410 360

280 1420 373

290 1425 386

300 1435 399

310 1440 413

320 1450 426

330 1455 439

340 1460 453

350 1470 466

360 1475 479


110 2080 147

120 2085 160

130 2095 174

140 2100 187

150 2105 200

160 2115 213

170 2120 227

180 2130 240

190 2135 253

200 2145 266

210 2150 280

220 2160 293

230 2165 306

240 2170 320

250 2180 333

260 2185 346

270 2195 360

280 2200 373

290 2210 386

300 2215 399

310 2225 413

320 2230 426

330 2240 439

340 2245 453

350 2250 466

360 2260 479

370 2265 493

380 2275 506

390 2280 515

400 2290 532

410 2295 546


90 1575 120

100 1585 133

110 1590 147

120 1595 160

130 1605 174

140 1610 187

150 1620 200

160 1625 213

170 1635 227

180 1640 240

190 1650 253

200 1655 266

210 1665 280

220 1670 293

230 1675 306

240 1685 320

250 1690 333

260 1700 346

270 1705 360

280 1715 373

290 1720 386

300 1730 399

310 1735 413

320 1745 426

330 1750 439

340 1755 453

350 1765 466

360 1770 479

370 1780 493

380 1785 506

390 1795 515

400 1800 532

410 1810 546

FIG QC 110 SIZES 1-47SIZE 1-6 7-12 13-18 19-26 27-33 34-39 40-44 45-47

D 250 300 350 400 600 750 1100 1100

E 150 220 295 330 390 440 525 525

F 180 215 270 325 405 495 610 610

G 115 120 135 150 180 225 280 280

H 180 215 270 325 405 495 610 610

J 135 140 160 175 215 270 330 330

M 55 65 75 95 115 145 180 180

N 55 65 75 95 115 145 198 198

P 33 38 65 66 83 100 121 165

AA 6 6 8 8 10 10 15 15

BB 14 18 22 22 22 27 33 33

EE 220 305 420 460 585 610 840 840

FF 210 280 330 420 485 560 660 660

GG 180 255 370 395 510 510 740 740

HH 170 230 280 355 410 460 560 560

JJ 102 108 121 133 165 206 257 257

KK 80 100 170 180 230 240 360 360

LL 118 153 205 244 288 330 400 445

SS 230 260 315 380 490 610 685 685

TT 105 120 155 190 240 295 390 390

UU 80 100 130 150 180 200 230 230

VV 75 95 120 145 175 195 225 225

INSTALLATION INSTRUCTIONS

Page 24

Quality Constant Support Models – FIG QC100, QC110, QC120 & QC130 are providedwith a choice of top attachments for fixing to existing steelwork , whether by using sus-pension rods or by bolting direct to the supporting steelwork. On models bolted directlyto the face of the steelwork there is the option to site weld the unit if necessary.

Normally these units are connected to the pipework with pipe clamps and hanger rodswhich are appropriately threaded for screwing into the turnbuckle that is provided withthe unit.

“Cold pulling” of a line can be accommodated by adjusting the turnbuckle within its lim-its, if preferred turnbuckles with a larger opening than 150mm can be supplied onrequest.

The preset pins must remain in place during Hydrostatic testing of the pipework. Aftertesting has been performed and prior to starting up the system the preset pins must beremoved by adjusting the turnbuckle so that the load arm moves sufficiently to free thepreset pin for withdrawal.

Quality Constant Support models – FIG QC140 & QC150 support the pipework frombelow. This is achieved by bolting to the floor or steelwork below the pipe.

The equipment load is transferred to the support unit via an adjustable load pad which israised by turning a nut until the correct position is achieved. Further adjustment of thenut will enable the preset pin to be withdrawn.

Quality Constant Support units are delivered to site preset to support the theoretical loadof the pipework. The load on all units may be adjusted to allow for deviations betweenthe actual and the theoretical load that has been calculated.

It is important that all units are checked after start up to confirm that the travel indicatorsare pointing to the Hot position. During shutdown periods the units should be checked toconfirm that the travel indicators are pointing to the cold position.

AncillaryEquipment

Section 2

Ancillary Equipment

U Bolt to grip pipe

U Bolt not to grip pipe

Allthread Rod

Composite Eye Rod

Double Eye Rod Unwelded

Double Eye Rod Welded

Eye Rod Unwelded

Eye Rod Welded

Forged Eye Rod

Linked Eye Rod Unwelded

Linked Eye Rod Welded

J Bolt

Tie Rod

Weldless Bownut

Rod Coupling

Clevis

2G

2NG

3AR

3BR/3CR

3DE

3DEW

3ER

3ERW

3FR

3LE

3LEW

3J

3R

4B

4RC

4SC

34

34

39

37/38

38

38

37

37

37

38

38

38

39

39

39

40

31

31

32

32

32

31

34

34

36

32

32

36

12L

12H

13L

13H

14/14L

15BL/15NL/15SL

16A

16S

17B/18B/19B

20L

20H

120B

2 Bolt Pipe Clamp(Light Series) Carbon Steel

2 Bolt Pipe Clamp(Heavy Series) Carbon Steel

3 Bolt Pipe Clamp(Light Series) Carbon Steel

3 Bolt Pipe Clamp(Heavy Series) Carbon Steel

Extended Pipe Clamp

Multiple Pipe Clamp

Saddle Anchor

Saddle Guide

Beam Clamp

3 Bolt Pipe Clamp(Light Series) Alloy Steel

3 Bolt Pipe Clamp(Heavy Series) Alloy Steel

Beam Clamp

DESCRIPTION FIGURE No. PAGE DESCRIPTION FIGURE No. PAGE

Page 25

Ancillary Equipment

Turnbuckle

Adjustable Pipe Support

Clevis Hanger

Cast Pipe Roller

Adjustable Roller Chair

Roller Support

Roller Support

Roller Hanging Cage

Roller Chair

Pipe Ring

Pipe Ring Plate

Extended Pipe Ring

Welded Beam Attachment

Hemispherical Cup

Hemispherical Washer

Adjustable Beam Attachment

4T

6AP

124

500/501

520/530

510

550

560

580

700MR

710

720MR

800N/800U

810C

810RW

125/126

39

43

33

40

41

40

41

42

42

42

42

43

35

43

43

45

37

33

46

47

47

48

49

44

44

50

50

35

121V

122/123

610/620

630

640

650/660

670/680

128

127

700/701

690

9WL

Bolted Beam Attachment

Band Clamp

Wall/Steel Bracket

Medium Welded Steel Bracket

Heavy Welded Steel Bracket

Clamped Pipe Shoe

Sliding Pipe Shoe

Yoke Pipe Clamp(Heavy Load)

Yoke Pipe Clamp(Moderate Load)

Rigid/Sliding Base Support

Elbow Hanger

Welding Lug


Page 26

ANCILLARY EQUIPMENT

INDEX

FIG.No. DESCRIPTIONPageNo. PICTORIAL FIG.No. DESCRIPTION

PageNo. PICTORIAL

2G

2NG

3AR

3BR

3CR

3DE

3DEW

3ER

3ERW

3FR

3LE

3LEW

3J

3R

4B

4RC

4SC

4T

6AP

9WL

‘U’ BOLTTO GRIP PIPE

‘U’ BOLTNOT TO GRIP

PIPE

ALLTHREADROD

COMPOSITEEYE ROD

COMPOSITEEYE ROD

DOUBLEEYE ROD

UNWELDED

DOUBLEEYE RODWELDED

EYE RODUNWELDED

EYE RODWELDED

FORGEDEYE ROD

LINKEDEYE ROD

UNWELDED

LINKEDEYE RODWELDED

J BOLT

TIE ROD

WELDLESSBOWNUT

ROD COUPLING

CLEVIS

TURNBUCKLE

ADJUSTABLEPIPE

SUPPORT

WELDINGLUG

34

34

39

37

38

38

38

37

37

37

38

38

38

39

39

39

40

39

43

35

Page 27

ANCILLARY EQUIPMENT

INDEX


PageNo. PICTORIAL

12L

12H

13L

13H

14

14L

15BL

15NL

15SL

16A

16S

17B

18B

19B

20L

20H

120B

121V

122

123

2 BOLT PIPECLAMP

LIGHT SERIESCARBON STEEL

2 BOLT PIPECLAMP

HEAVY SERIESCARBON STEEL

3 BOLT PIPECLAMP

LIGHT SERIESCARBON STEEL

3 BOLT PIPECLAMP

HEAVY SERIESCARBON STEEL

EXTENDEDPIPE CLAMP

EXTENDEDPIPE CLAMP

MULTIPLEPIPE CLAMPBENT LEGS

MULTIPLEPIPE CLAMPS

NO LEGS

MULTIPLEPIPE CLAMPSTRAIGHT

LEGS

SADDLEANCHOR

SADDLEGUIDE

BEAMCLAMP

BEAMCLAMP

BEAMCLAMP

3 BOLT PIPECLAMP

LIGHT SERIESALLOY STEEL

3 BOLT PIPECLAMP

HEAVY SERIESALLOY STEEL

BEAMCLAMP

BOLTEDBEAM

ATTACHMENT

BANDCLAMP

BANDCLAMP

31

31

32

32

32

32

31

31

31

34

34

36

36

36

32

32

36

37

33

33

Page 28

ANCILLARY EQUIPMENT

INDEX


PageNo. PICTORIAL

124

500

501

510

520

530

550

560

580

700MR

710

720MR

800N

800U

810C

810RW

125

126

127

128

CLEVISHANGER

CASTPIPE

ROLLER

CASTPIPE

ROLLER

ROLLERSUPPORT

ROLLERCHAIR

ADJUSTABLEROLLERCHAIR

ROLLERSUPPORT

ROLLERHANGING

CAGE

ROLLERCHAIR

PIPERING

PIPERING

PLATE

EXTENDEDPIPERING

WELDEDBEAM

ATTACHMENT

WELDEDBEAM

ATTACHMENT

HEMISPHERICALCUP

HEMISPHERICALWASHER

ADJUSTABLEBEAM

ATTACHMENT

ADJUSTABLEBEAM

ATTACHMENT

YOKEPIPE CLAMP

(Moderate Load)

YOKEPIPE CLAMP(Heavy Load)

33

40

40

40

41

41

41

42

42

42

42

43

35

35

43

43

45

45

44

44

Page 29

ANCILLARY EQUIPMENT

INDEX

FIG.No. DESCRIPTIONPageNo. PICTORIAL

610

620

630

640

650

660

670

680

WALL/STEELBRACKET

WALL/STEELBRACKET

MEDIUMWELDED STEEL

BRACKET

HEAVYWELDED STEEL

BRACKET

CLAMPEDPIPE SHOE

CLAMPEDPIPE SHOE

SLIDINGPIPE SHOE

SLIDINGPIPE SHOE

690ELBOW

HANGER

700/701RIGID/SLIDING

BASE SUPPORT

46

46

47

47

48

48

49

49

50

50

Page 30

Page 31

ANCILLARY EQUIPMENTFIG. 12L & 12H PIPE CLAMP (CARBON STEEL)

PIPE O/D

A

A

TB

B

G

Nom Pipe Pipe Bolt Mat'l Max Ld kgSize O/D B A G Dia T 340°C15 21.3 33 50 13 M10 25x3 22220 26.9 33 50 13 M10 25x3 22225 33.7 38 58 13 M10 25x3 22232 42.4 45 62 13 M10 25x3 22240 48.3 50 70 13 M10 30x6 36550 60.3 57 75 16 M12 30x6 36565 76.1 70 90 16 M12 30x6 36580 88.9 76 95 16 M12 30x6 36590 101.6 84 100 16 M12 30x6 365

100 114.3 95 120 20 M16 40x6 365125 139.7 114 140 20 M16 40x6 365150 168.3 128 158 25 M20 40x10 735175 193.7 146 175 25 M20 40x10 735200 219.1 159 190 25 M20 40x10 735225 244.5 178 210 25 M20 40x10 735250 273.0 190 225 27 M24 50x12 1095300 323.9 215 250 27 M24 50x12 1095350 355.6 235 270 27 M24 65x12 1095400 406.4 260 295 27 M24 65x12 1095450 457.0 300 335 27 M24 65x15 1450500 508.0 324 362 27 M24 65x15 1450600 610.0 390 430 35 M30 80x15 1450

FIG. 12L - PIPE CLIP Light

Nom Pipe Pipe Bolt Mat'l Max Ld kgSize O/D B A G Dia T 340°C40 48.3 50 70 17 M12 40x 6 50050 60.3 58 86 17 M12 40x 6 50065 76.1 70 98 20 M16 40x 6 50080 88.9 86 116 25 M20 40x 6 150090 101.6 90 120 25 M20 40x 6 1500100 114.3 95 135 27 M24 50x 10 1650125 139.7 115 150 27 M24 50x 10 1650150 168.3 135 170 27 M24 65x 12 2175175 194.7 145 180 27 M24 65x 12 2175200 219.1 160 196 27 M24 65x 12 2175225 244.5 180 215 27 M24 65x 12 2175250 273.0 200 245 35 M30 65x 15 3950300 323.9 235 280 35 M30 80x 20 4150350 355.6 255 310 40 M36 90x 20 4150400 406.4 280 335 40 M36 90x 20 4150450 457.0 305 360 40 M36 90x 20 4150500 508.0 331 385 40 M36 90x 20 4150600 610.0 395 450 40 M36 90x 20 4150

FIG. 12H PIPE CLIP Heavy

Material - Carbon Steel

When ordering specify:Figure No.Nominal Pipe SizeFinish

H

A CTR A

PIPE O/D

PIPE O/D

H

A CTR A

PIPE O/D

PIPE O/D

CTR

PIPE O/D

PIPE O/D

FIG. 15BL MULTIPLE PIPE CLAMP

FIG. 15SL MULTIPLE PIPE CLAMP

FIG. 15NL MULTIPLE PIPE CLAMP

Material - Carbon SteelWhen ordering specify:Figure No.Pipe O/DCTRLength AHeight HFinish

Material - Carbon SteelWhen ordering specify:Figure No.Pipe O/DCTRLength AHeight HFinish

Material - Carbon SteelWhen ordering specify:Figure No.Pipe O/DCTRFinish

ANCILLARY EQUIPMENT

Nom Pipe Pipe Bolt Matl SizeSize O/D C E G Dia T A B Fig 13H Fig 20H150 168.3 229 143 45 30 100x12 280 194 3220 1680200 219.1 254 172 45 30 110x12 304 225 3220 1680225 244.5 305 198 50 36 100x20 355 260 4445 2270250 273.0 305 214 50 36 100x20 355 265 4445 2270300 323.9 330 240 50 36 100x20 380 290 4445 2270350 355.6 356 262 58 42 110x20 410 319 5125 2720400 406.4 381 292 58 42 110x25 440 350 5125 2720450 457.0 406 317 58 42 110x25 465 375 5125 2720500 508.0 457 353 58 42 130x25 520 418 6805 3400600 610.0 508 418 58 42 150x30 585 495 6805 4080

SWL Kg

PIPE O/D

E

C

T B

A

G

D

FIG. 13L & 20L (Moderate Loads)

FIG. 13H & 20H (Heavy Loads)

FIG.13L & 13H PIPE CLAMP (CARBON STEEL)FIG.20L & 20H PIPE CLAMP (ALLOY STEEL)

MaterialFig. 13L & 13H - Carbon SteelFig. 20L & 20H - Alloy SteelFig. 13L & 13H up to 400ºCFig. 20L & 20H above 400ºC to 570ºCWhen ordering specify :Figure No.Nominal Pipe SizeFinish

Nom Pipe Pipe Bolt MatlSize O/D L Dia H Size T20 26.9 185 M10 12 25x625 33.7 190 M10 12 30x632 42.4 200 M10 12 30x640 48.3 210 M10 12 30x650 60.3 230 M12 14 40x665 76.1 265 M12 14 40x680 88.9 280 M12 14 40x690 101.6 295 M12 14 40x6

100 114.3 315 M12 14 40x6125 139.7 350 M12 14 40x6150 168.3 420 M16 18 50x10200 219.1 475 M16 18 50x10

PIPE O/D

L

T

H

HEIGHT

Material - Carbon SteelWhen Orderingspecify:Figure NoNominal Pipe SizeHeightFinish

FIG. 14L OFFSET PIPE CLAMP

Nom Pipe Pipe Bolt MatlSize O/D L Dia Size T20 26.9 120 M10 25x625 33.7 130 M10 30x632 42.4 130 M10 30x640 48.3 136 M10 30x650 60.3 160 M12 40x665 76.1 200 M12 40x680 88.9 210 M12 40x690 101.6 220 M12 40x6

100 114.3 240 M12 40x6125 139.7 275 M12 40x6150 168.3 330 M16 50x10200 219.1 385 M16 50x10

Material - Carbon SteelWhen Orderingspecify:Figure NoNominal Pipe SizeHeightFinish

PIPE O/D

L

T

HEIGHT

FIG. 14 EXTENDED PIPE CLAMP

Page 32

Nom Pipe Pipe Bolt Matl SizeSize O/D C E G Dia T A B Fig 13L Fig 20L15 21.3 92 32 13 M10 30x6 105 48 250 21020 26.9 95 38 13 M10 30x6 110 54 250 21025 33.7 97 44 13 M10 30x6 112 60 250 21032 42.4 102 49 13 M10 30x6 118 64 250 21040 48.3 102 46 25 M12 30x6 125 70 635 31550 60.3 127 54 25 M12 30x6 150 76 635 31565 76.1 140 67 25 M12 45x8 162 89 635 31580 88.9 152 76 25 M12 45x8 176 99 635 31590 101.6 159 82 25 M12 45x8 180 104 635 315

100 114.3 165 100 25 M16 50x10 195 129 1000 500125 139.7 178 114 25 M16 50x10 205 142 1000 500150 168.3 216 135 40 M20 65x10 255 173 1135 590200 219.1 241 163 40 M20 65x10 280 200 1135 590250 273.0 279 192 40 M20 65x12 320 230 1315 680300 323.9 305 220 40 M20 65x12 345 260 1315 680350 355.6 330 243 50 M24 80x15 380 290 1725 910400 406.4 356 273 50 M24 80x15 405 320 1725 910450 457.2 381 300 50 M24 80x15 430 350 1725 910500 508.0 406 329 50 M24 80x20 460 380 2220 1135600 610.0 457 390 50 M24 100x20 515 448 2405 1225

SWL Kg

ANCILLAR Y EQUIPMENT

Page 33

Nom Pipe Pipe Dia Matl MaxSize O/D E F D Size T Load Kg15 21.3 32 43 10 25x3 44020 26.9 32 45 10 25x3 44025 33.7 36 57 10 25x3 44032 42.4 36 57 10 25x3 44040 48.3 41 65 10 25x3 44050 60.3 41 72 10 25x3 44065 76.1 41 79 12 25x3 44080 88.9 41 85 12 25x3 44090 101.6 41 92 12 25x3 440

100 114.3 41 98 12 25x3 440125 139.7 55 125 12 25x3 440150 168.3 61 145 16 30x6 570200 219.1 61 171 20 40x6 820

PIPE O/D

T E

F

D



FIG. 122 BAND CLAMP

C

B

D

A



FIG. 123 BAND CLAMP

Nom Pipe Pipe Rod Matl Size Max Ld

Size O/D G Dia D F R WxT WxT 1 H Kg

15 21.3 14 10 40 M6 20x6 20x6 65 26020 26.9 14 10 48 M6 20x6 20x6 74 26025 33.7 14 10 48 M6 20x6 20x6 74 26032 42.4 14 10 52 M6 20x6 20x6 78 26040 48.3 14 10 60 M6 20x6 20x6 85 26050 60.3 14 10 62 M6 20x6 20x6 87 26065 76.1 20 12 82 M8 30x6 30x6 110 51080 88.9 20 12 86 M8 30x6 30x6 112 51090 101.6 20 12 92 M10 30x6 30x6 120 510

100 114.3 20 16 110 M12 30x6 30x6 140 625125 139.7 20 16 131 M12 40x6 40x6 160 625150 168.3 30 20 150 M16 50x6 50x6 184 850200 219.1 30 20 176 M16 50x6 50x10 214 900250 273.0 39 24 215 M20 50x6 50x10 256 1600300 323.9 39 24 245 M20 50x6 50x15 286 1725350 355.6 39 24 275 M24 50x6 50x15 322 1900400 406.4 79 24 337 M24 65x6 65x15 385 2100450 457.0 83 24 352 M30 65x6 65x15 403 2180500 508.0 89 30 393 M30 80x10 80x15 444 2180600 609 95 30 451 M30 80x10 80x15 502 2180

D

W x TR

GF

H

W x T1

Material - Carbon Steel.

When orderingspecify:Figure No.Nominal PipeSizeFinish

FIG. 124 CLEVIS HANGER

Nom Pipe Pipe BoltSize O/D A B C D Size15 21.3 20x3 10 46 56 M820 26.9 20x3 16 46 62 M825 33.7 20x3 15 50 65 M832 42.4 20x3 20 56 76 M840 48.3 20x3 24 62 86 M850 60.3 25x3 29 66 95 M865 76.1 25x3 38 68 106 M1080 88.9 25x3 46 80 126 M1090 101.6 25x3 50 90 142 M10

100 114.3 30x3 57 105 162 M12125 139.7 30x3 70 116 186 M12150 168.3 30x3 84 128 212 M12200 219.1 30x3 110 156 266 M12

ANCILLARY EQUIPMENT

Page 34

Nom Pipe Pipe MatlSize O/D CTR L K R1 H1 G R H Size W15 21.3 90 124 12 12 11 2 12 8 40x620 26.9 90 124 12 15 14 2 14 11 40x625 33.7 100 142 12 19 17 2 18 15 40x632 42.4 110 162 14 23 22 2 22 19 40x840 48.3 120 162 14 26 25 2 25 22 40x850 60.3 140 210 14 32 31 2 31 28 40x865 76.1 170 260 18 40 38 2 40 35 50x1080 88.9 200 280 18 47 45 3 46 41 50x10

100 114.3 216 295 18 60 58 3 59 54 50x10125 139.7 280 360 26 73 70 3 72 66 60x15150 168.3 310 402 26 87 85 3 86 81 60x15200 219.1 360 460 26 113 110 4 112 103 60x15250 273.0 410 500 26 140 137 4 139 130 150x15300 323.9 460 550 26 165 162 5 164 155 150x15350 356.6 490 580 26 181 178 5 180 170 150x15400 406.4 570 662 26 206 204 5 205 197 200x20450 457.2 620 710 26 232 229 5 231 220 200x20500 508.0 670 762 26 257 254 5 256 245 200x20

Saddle Anchor

CTR

L

W

K

H1

HR

R1

16AANCHOR

16SSADDLE

T

K

G

TWO HOLES IN PIPE SIZE 21.3 O/DTO 219.1 O/D

FOUR HOLES IN PIPE SIZE 273 O/DTO 508 O/D

Material - Carbon SteelWhen ordering specify:Figure No.Nominal PipeSizeFinish

Nom Pipe A Pipe MaxSize O/D F E D C B Load Kg15 21.3 8 28 6 25 38 23020 26.9 10 33 6 25 40 23025 33.7 10 40 6 25 44 23032 42.4 10 52 10 35 50 54540 48.3 16 58 10 35 56 54550 60.3 16 70 10 35 61 54565 76.1 20 88 12 35 79 100080 88.9 20 102 12 35 86 100090 101.6 20 116 12 35 90 1000

100 114.3 20 128 12 35 98 1000125 139.7 20 152 12 40 112 1550150 168.3 20 182 12 40 126 1550200 219.1 20 236 16 40 155 2000225 244.5 20 266 20 40 174 2000250 273.0 25 294 20 40 186 2000300 323.9 25 346 20 40 210 2000350 355.6 25 378 20 85 250 2000400 406.4 25 429 20 85 285 2000450 457.0 25 484 24 85 300 4100500 508.0 25 534 24 85 330 4100600 610.0 25 636 24 85 390 4100

E CTRS

D THREAD

CB

A PIPE O/D

F

Material - Carbon Steel.Complete with 2 nuts.


FIG. 16S SADDLE GUIDEFIG. 16A SADDLE ANCHOR

FIG. 2G ‘U’ BOLT GRIP TYPE

Nom Pipe A Pipe MaxSize O/D F E D C B Load Kg15 21.3 8 30 6 60 66 23020 26.9 10 35 6 60 70 23025 33.7 10 42 6 65 70 23032 42.4 10 54 10 60 75 54540 48.3 15 62 10 60 80 54550 60.3 15 74 10 60 85 54565 76.1 20 90 12 80 92 100080 88.9 20 106 12 80 100 100090 101.6 20 116 12 80 110 1000

100 114.3 20 128 12 80 115 1000125 139.7 20 155 12 80 130 1550150 168.3 20 189 16 100 155 1550200 219.1 20 238 16 100 176 2000225 244.5 20 268 20 110 189 2000250 273.0 24 296 20 110 215 2000300 323.9 24 348 20 110 248 2000350 355.6 24 380 20 110 260 3405400 406.4 24 431 20 110 285 3405450 457.0 24 485 24 120 320 4450500 508.0 24 536 24 120 346 4450600 610.0 24 638 24 130 410 4450

Material - Carbon Steel.Complete with 4 nuts.


E CTRS

D THREAD

CB

A PIPE O/D

F

FIG. 2NG ‘U’ BOLT NON-GRIP TYPE

ANCILLARY EQUIPMENT

Page 35

FIG. 800U BEAM ATTACHMENT

Sling Rod Hole Max Ld KgSize K WxT Dia G L H 340°C

1 75 50x6 M10 40 30 12 3802 75 50x6 M12 40 30 14 5603 85 80x10 M16 60 30 18 10404 85 80x10 M20 70 30 22 16305 115 100x12 M22 75 40 24 20406 115 100x12 M24 75 40 26 23607 120 100x15 M30 110 40 32 37508 165 150x15 M33 120 60 36 46309 165 150x15 M36 120 60 39 5460

10 200 150x20 M42 140 70 45 748011 210 150x25 M48 175 70 51 982012 240 180x25 M56 185 85 60 1356013 250 180x30 M64 220 85 68 17900

SLING ROD

L

T G T

K

W

H


When ordering specify:Figure No.SizeFinish

Sling Rod Pin Hole Max Ld KgSize G K WxT Dia Size L H 340°C

1 35 50 50x6 M10 10x45 30 12 3802 35 65 50x6 M12 12x65 40 14 5603 35 70 50x6 M16 16x45 45 18 10404 35 85 80x10 M20 20x70 55 22 16305 45 90 80x10 M22 22x85 60 24 20206 45 110 80x10 M24 24x85 70 26 23607 50 125 100x12 M30 30x100 80 32 37508 60 130 100x12 M33 33x110 80 36 46309 75 160 130x15 M36 36x130 100 39 5460

10 85 180 130x15 M42 42x135 110 45 748011 85 210 150x20 M48 48x155 130 51 982012 100 235 180x20 M56 56x170 145 60 1356013 110 255 200x20 M64 64x180 160 68 17900

SLING ROD

L

T G T

K

W

H

ROD SIZE UP TO M36 ROD SIZE OVER M36

SLING ROD



Hole Max Ld KgSize A B WxT H 340°C

1 30 55 50x6 13 3802 40 65 50x6 15 5603 50 75 50x6 18 10404 60 90 80x10 23 16305 70 105 80x10 24 20206 80 115 80x10 26 23607 90 135 100x12 32 37508 100 150 100x12 36 46309 110 175 130x15 39 5460

10 130 200 130x15 45 748011 150 235 150x20 51 982012 170 260 180x20 60 1356013 200 295 200x20 68 17900

FIG. 800N BEAM ATTACHMENT

W T

B

A

H

FIG. 9WL WELDING LUGMaterial - Carbon Steel


ANCILLARY EQUIPMENT

Page 36

W

H

D

ROD SIZE

Rod Bolt Steel Max

Size Size Size Size Load Kg H D1 12 M10 40x8 380 180 1002 16 M12 50x8 540 180 1003 20 M16 50x10 1010 190 1204 24 M20 60x15 1590 216 1355 30 M24 80x15 2290 230 1426 36 M30 90x15 3700 262 1627 42 M36 100x20 5400 302 1988 42 M42 130x25 8000 335 225

Material - Carbon Steel.When orderingspecify:Figure No.SizeBeam Width WBeam ThicknessFinish

FIG. 17B BEAM CLAMP

G

W

HB Steel Max Load

Size H B G Size Kg W1 120 M10 50 30x6 320 76-2032 160 M12 80 50x12 680 76-254


FIG. 18B BEAM CLAMP

W

D G

C

FIG. 19B BEAM CLAMP

Steel MaxSize D C Bolt G Size Load Kg W

1 15 30 M10 16 30 x 6 310 76-2032 15 45 M12 20 40x10 390 76-2033 25 45 M16 20 50x10 450 76-2034 30 50 M20 24 50x12 690 76-254


WA

C

D

Steel MaxSize D Bolt A Size Load Kg W

1 61 M12 11 30x6 230 76-3052 66 M16 13 40x10 320 76-3053 76 M20 13 50x10 360 76-3054 90 M24 15 65x12 550 76-305


FIG. 120B BEAM CLAMP

ANCILLARY EQUIPMENT

Page 37

H

D

AB W

C

T

FIG. 121V BOLTED BEAM ATTACHMENT

Dia Matl Max LoadSize C B D A H WxT Kg

1 75 153 M12 120 13 30x10 5502 75 178 M16 135 15 40x10 10203 90 200 M20 160 18 40x12 16004 90 225 M24 175 23 50x12 2250



Size D M10 M12 M16 M20 M24 M30 M36 M42H 16 18 22 26 30 36 42 48

Max LoadKg 360 530 1010 1580 2280 3650 5340 7400

H

300 STD

150

D

Material - Carbon Steel.When ordering specify:Figure No.SizeLength if not standardThread: Standard R/HL/H Supplied on RequestFinish

Size D M10 M12 M16 M20 M24 M30 M36 M42 M48 M64 M72H 25 30 30 40 50 75 75 100 70 80 100

Max LoadKg 380 560 1040 1630 2360 3750 5460 7480 9820 13560 17900

H

L

150D

FIG. 4B Figure 4B will be tack weldedto figure 3R.Material - Carbon SteelWhen ordering specify:Figure No.SizeLength LFinishThread: Standard R/HL/H Supplied on Request

FIG. 3FR FORGED EYE RODTo BS3974 Pt. 1. Fig. 3

FIG. 3BR COMPOSITE EYE ROD

Size D M8 M10 M12 M16 M20 M24 M30 M36 M42 M48H 12 20 22 28 32 38 45 50 58 64

Max LoadUnwelded 68 100 195 320 475 875 1065 2115 2790 3705Max Load

Welded 215 370 555 1025 1605 2344 3705 5260 7395 9775

H

L

150DMaterial - Carbon Steel.When ordering specify:Figure No.SizeLength LFinishThread: Standard R/HL/H Supplied on Request

FIG. 3ER (UNWELDED) EYE RODFIG. 3ERW (WELDED) EYE ROD


Page 38



Welded 215 370 555 1025 1605 2344 3705 5260 7395 9775

H

L

D

H

Material - Carbon SteelWhen ordering specify:Figure No.SizeLength LFinish

FIG. 3DE (UNWELDED) DOUBLE EYE RODFIG. 3DEW (WELDED) DOUBLE EYE ROD



Welded 215 370 555 1025 1605 2344 3705 5260 7395 9775

Material - Carbon SteelWhen ordering specify:Figure No.SizeLength L, M & NFinishThread: Standard R/HL/H Supplied on Request

150H

M N

D

L

150

FIG. 3LE (UNWELDED) LINKED EYE RODFIG. 3LEW (WELDED) LINKED EYE ROD

Size D M10 M12 M16 M20 M24

Material - Carbon SteelWhen ordering specify:Figure No.SizeLength LFinishThread: Standard R/HL/H Supplied on Request

L

150RAD 0.6 x D D

FIG. 3J J BOL T

D Dia M8 M10 M12 M16 M20 M24 M30 M36M/SqxA 22x30 22x30 22x35 30x40 30x50 40x60 50x80 55x90

B 17 20 23 30 36 41 53 60H Dia 9 13 15 18 23 27 33 38

C 9 11 13 18 20 24 30 36Max Load 215 375 540 1035 1610 2350 3678 5205

Material - Carbon SteelWhen ordering specify:Figure No.Size DLength LFinishThread: Standard R/HL/H Supplied on Request

L

150D

M

BA

CH DIA

FIG. 3CR COMPOSITE EYE ROD

ANCILLARY EQUIPMENT

Page 39

Size D M10 M12 M16 M20 M24 M30 M36 M42 M48 M56 M64Max Load 370 550 1045 1605 2360 3705 5460 7390 9820 13055 17090

FIG. 3R TIE ROD Material - Carbon SteelWhen ordering specify:Figure No.SizeLength LFinishThread: Standard R/HL/H Supplied on Request

Size D M6 M8 M10 M12 M16 M20 M24 M30 M36 M42 M48 M56Max Load 130 235 375 520 1000 1595 2290 3575 5390 7395 9715 13225

D

L

Material - Carbon SteelWhen ordering specify:Figure No.SizeLength LFinishThread: Standard R/HL/H Supplied on Request

FIG. 3AR ALLTHREAD ROD

Max LdSize W B KgM10 32 184 370M12 35 200 550M16 40 205 1045M20 50 218 1610M24 63 218 2350M30 85 224 3650M36 85 230 5360M42 90 236 7445M48 90 244 9795M56 120 252 13490

150 STD

W

B

RIGHT HAND THREADLEFT HAND THREAD

Material - Forged SteelBS970 Pt 1 Gr080 A27When ordering specify:Figure No.SizeFinish

FIG. 4T FORGED TURNBUCKLE

B

T

DE

AC

Material - Forged SteelBS970 Pt 1 Gr080 A27Sizes M48 upward, typechange.When ordering specify:Figure No.SizeFinishThread: Standard R/H

Size D Max LoadT A B C Dia E Kg

M8 6 25 64 32 16 240M10 7 25 64 32 16 380M12 9 30 73 38 18 560M16 12 30 73 38 18 1040M20 14 40 102 45 25 1630M24 17 50 124 50 28 2360M30 21 75 146 70 38 3750M36 26 75 146 70 38 5460M42 30 100 180 80 45 7480M48 31 70 240 100 75 9820M56 36 80 270 100 80 13560M64 42 100 330 130 80 17900M72 47 100 330 130 80 22740

FIG. 4B WELDLESS BOWNUT(To BS3974 Part 1)

A D

Size D M10 M12 M16 M20 M24 M30 M36 M42 M48 M56 M64A 45 45 55 55 70 75 110 120 130 150 175

Material - Carbon Steel.Tapped RH Thread.When ordering specify:Figure No.SizeFinishThread: Standard R/H

FIG. 4RC ROD COUPLING

150D150

L


Page 40

S

V

L

W

C

T

D

Size D S V L C T W Max Ld Kg1 M10 35 20 85 37 12 42 3602 M12 35 25 85 37 12 42 5253 M16 40 30 85 37 12 46 10154 M20 40 35 85 37 12 46 15955 M24 70 40 85 40 14 62 23106 M30 70 50 85 40 14 62 37157 M36 80 55 100 46 14 74 52158 M42 85 60 100 51 14 80 74009 M48 90 70 120 63 20 100 9605

10 M56 110 80 140 65 22 104 1299011 M64 120 90 160 75 22 108 17505

Material - Carbon Steel.When ordering specify:Figure No.SizeFinish

FIG. 4SC CLEVIS

Nom Pipe PipeSize O/D A C D H L25 33.7 20 27 15 11 2732 42.4 21 32 15 11 3840 48.3 22 35 16 11 4050 60.3 24 41 16 11 4465 76.1 29 49 21 14 6080 88.9 35 57 24 14 95

100 114.3 35 71 24 14 95125 139.7 49 87 31 21 146150 168.3 49 103 31 21 146200 219.1 69 130 38 24 228250 273.0 85 159 44 27 280300 323.9 100 189 50 27 332350 355.6 120 213 66 27 361400 406.4 130 240 67 27 414450 457.2 138 267 70 27 463500 508.0 152 295 76 33 514600 609.6 183 365 92 33 618

cTOOF PIPE

C

H

L

A

D

FIG. 500 CAST PIPE ROLLER

Material - Cast Iron.


Nom Pipe Pipe RodSize O/D A C B H L Dia50 60.3 45 46 32 14 67 M1265 76.1 45 52 32 14 67 M1280 88.9 45 62 32 14 67 M1290 101.6 45 68 32 14 67 M12100 114.3 54 71 38 14 93 M12125 139.7 54 87 38 14 93 M12150 168.3 54 102 38 14 93 M12175 193.7 54 117 38 14 93 M12200 219.1 90 133 52 22 153 M20250 273.0 90 162 52 22 153 M20300 323.9 98 190 58 26 205 M24350 355.6 98 206 58 26 205 M24400 406.4 115 235 80 32 232 M30450 457.2 115 263 80 32 232 M30500 508.0 115 292 80 32 232 M30600 609.6 115 350 80 38 255 M36



A B

H

C

OF PIPETO

L

c

FIG. 501 CAST PIPE ROLLER

Nom Pipe Pipe DiaSize O/D C L D H50 60.3 41 116 M10 9765 76.1 49 125 M12 12080 88.9 57 150 M12 120

100 114.3 71 182 M12 120125 139.7 87 216 M16 120150 168.3 103 255 M16 120200 219.1 130 306 M20 140250 273.0 159.0 356 M24 140300 323.9 189 408 M36 155350 355.6 213 435 M36 185400 406.4 240 490 M36 208



L

C

H

D

CENTRE LINE OF PIPEFIG. 510 ROLLER SUPPORT


Page 41

Nom Pipe PipeSize Size O/D A W L CTR T H

1 50 60.3 75 130 215 160 8 452 65 73.0 75 130 215 160 8 453 80 88.9 75 130 215 160 8 454 90 101.6 75 130 215 160 8 455 100 114.3 105 130 260 200 8 556 125 139.7 105 130 260 200 8 557 150 168.3 105 130 260 200 8 558 200 219.1 160 140 255 100 10 909 250 273.0 160 140 255 100 10 90

10 300 323.9 210 200 270 145 10 11311 350 355.6 210 200 270 145 10 11312 400 406.4 242 200 270 170 12 13313 450 457.2 242 200 310 170 12 13314 500 508.0 242 200 310 170 12 13315 600 610.0 264 250 330 190 12 133

Material - Carbon Steeland Cast Iron Roller Fig. 501


CTR

AL

26 DIA

T

H

W

FIG. 520 ROLLER CHAIR

Nom Pipe PipeNo. Size O/D A W L D B T1 50 60.3 157 150 215 M16 100 122 65 73.0 157 150 215 M16 100 123 80 88.9 157 150 215 M16 100 124 90 101.6 157 150 215 M16 100 125 100 114.3 205 150 260 M16 100 126 125 139.7 205 150 260 M16 100 127 150 168.5 205 150 260 M16 100 128 200 219.1 135 150 255 M20 114 159 250 273.0 135 150 255 M20 114 15

10 300 323.9 205 200 270 M20 145 2011 350 355.6 205 200 270 M24 145 2012 400 406.4 248 200 270 M24 150 2513 450 457.2 248 200 310 M24 150 2514 500 508.0 248 200 310 M24 150 2515 600 610.0 254 250 330 M30 178 25

AL W

26 DIA

B

D

T

Material - Carbon Steel and Cast Iron RollerFig. 501

When ordering specify:Figure No.Nominal Pipe SizesFinish

FIG. 530 ADJUSTABLE ROLLER CHAIR

Nom Pipe PipeSize O/D C L D H125 139.7 87 150 M12 120150 168.3 102 150 M12 120200 219.1 133 216 M20 142250 273.0 162 216 M20 142300 323.9 190 274 M24 156350 355.6 206 274 M24 156400 406.4 235 326 M30 185

FIG. 550 ROLLER SUPPORT

L

C

H

D

CENTRE LINE OF PIPE

Material - Carbon Steel andCast Iron Roller Fig 501.


ANCILLARY EQUIPMENT

Page 42

FIG. 580 ROLLER CHAIR

L

D

E

HT

BOLT SIZE

CTR

CENTRE LINE OF PIPE

Nom Pipe Pipe Matl BoltSize O/D L CTR E D H Size T Size50 60.3 102 45 42 M10 40 30x6 M1065 76.1 120 45 50 M12 40 30x6 M1080 88.9 135 45 57 M12 56 40x6 M10

100 114.3 135 65 72 M12 56 40x6 M10125 139.7 214 75 87 M16 70 40x10 M12150 168.3 214 85 104 M16 70 50x10 M12200 219.1 272 115 130 M20 75 50x10 M16250 273.0 338 125 160 M24 93 50x12 M20300 323.9 400 150 190 M24 106 50x12 M20

Material - Carbon Steel and Cast Pipe Roller.Fig. 500

When ordering specify:Figure NoNominal Pipe SizeFinish

Nom Pipe Pipe Rod Matl Size O/D B L H Size D Size T25 33.7 46 90 28 M10 30x632 42.4 55 90 33 M10 30x640 48.3 62 96 35 M10 30x650 60.3 65 110 42 M10 30x665 76.1 80 125 49 M12 40x680 88.9 115 160 57 M12 40x6

100 114.3 115 190 71 M12 40x6125 139.7 170 215 87 M16 50x6150 168.3 170 250 103 M20 50x6175 193.7 225 285 117 M20 50x6200 219.1 255 320 130 M20 50x10250 273.0 305 380 159 M20 50x12300 323.9 355 436 189 M24 50x12350 355.6 390 468 213 M24 65x12400 406.4 435 520 241 M24 80x12B

H

L

D

D

T

FIG. 560 ROLLER HANGING CAGE

Material - Carbon Steeland Cast Pipe RollerFig. 500

When orderingspecify:Figure No.Nominal Pipe SizeFinish

Nom Pipe Pipe ThreadSize O/D H T 10 17.1 24 M1015 21.3 26 M1020 26.6 28 M1025 33.4 32 M1032 42.1 36 M1040 48.2 40 M1050 60.3 46 M1065 73.0 57 M1280 88.9 65 M12

100 114.3 84 M12

PIPE O/D

H

T

Material - Malleable Iron

When ordering specify:Figure No.Nominal Pipe SizeTapping Size TFinish

ThreadNo. CTR H T 1 45 12 M102 45 12 M123 48 12 M124 55 16 M20

Material - Malleable Iron

When ordering specify:Figure No.Nominal Pipe SizeTapping Size TFinish

H CTR

T

FIG. 700MR PIPE RING

FIG. 710MR PIPE RING PLATE

ANCILLARY EQUIPMENT

Page 43

Nom Pipe PipeSize O/D H CTR P10 17.1 106 45 M1015 21.3 108 45 M1020 26.6 111 45 M1025 33.4 114 45 M1032 42.1 119 45 M1040 48.2 122 45 M1050 60.3 128 45 M1065 73.0 133 55 M1280 88.9 141 55 M12

100 114.3 160 55 M12

PIPE O/D

CTR

PH

Material - Malleable Iron.

When ordering specify:Figure No.Nominal PipeSizeFinish

FIG. 720MR EXTENDED PIPE RING

Nom PipeSize P SQ P1 Min Max65 50 150 M48 396 173080 50 150 M48 403 173090 80 200 M48 405 1730

100 80 200 50NB 415 1730125 80 200 50NB 430 1735150 100 280 65NB 440 1735200 100 280 65NB 480 1735250 100 280 65NB 500 1350300 100 280 65NB 531 1350350 100 280 65NB 550 1350400 100 280 65NB 575 1350450 150 350 100NB 600 1375500 150 350 100NB 630 1375600 150 350 100NB 675 1375750 150 350 100NB 782 975900 150 350 100NB 832 975

H


When ordering specify:Figure No.Pipe SizeDistance from floor toCentre of Pipe HFinish

FIG. 6AP ADJUSTABLE PIPE SUPPORT

H

P1

SQ

P

10mm

CENTRE LINE OF PIPE

RodDia D E F G HM6 23 10 19 8 8M8 30 10 22 10 10

M10 30 12 25 12 12M12 35 12 28 12 14M16 40 16 34 16 18M20 55 20 44 19 22M24 70 25 57 25 26M30 86 32 76 32 33M36 100 38 89 38 40M42 100 35 80 35 46M48 120 35 100 40 52M56 130 45 110 45 60M64 150 50 120 50 68

HF

GE

D

FIG. 810RW

FIG. 810RC

FIG. 810RW HEMISPHERICAL WASHERFIG. 810C HEMISPHERICAL CUP

Material - Malleable IronMalleable Iron washerBS1562:1997BSEN10025 GRS275JRWhen ordering specify:Figure No.Finish


Page 44

A

B

C

D G ØBOLT

F

H

E

125

FIG. 127 YOKE PIPE CLAMP (Moderate Load)FIG. 128 YOKE PIPE CLAMP (Heavy Load)

FIG. 127

FIG. 128

Material - Yoke : Carbon SteelU Bolt : Stainless Steel

When ordering specify:Figure No.Nominal Pipe SizeLarger sizes on application

Nom Pipe Pipe Max Ld (Kg)Size O/D A B C D E F G H 560ºC 580ºC 600ºC200 219.0 174 360 251 20 310 306 M36 80 4315 4105 3880250 273.0 174 410 305 20 360 334 M36 80 4315 4105 3880300 323.9 174 460 356 20 410 359 M36 80 4315 4105 3880350 355.6 210 540 392 24 460 387 M48 80 5610 5335 5055400 406.4 210 590 442 24 510 412 M48 80 5610 5335 5055450 457.2 210 640 493 24 565 438 M48 80 5610 5335 5055500 508.0 210 700 554 30 640 465 M48 80 7045 6690 6350550 558.8 210 780 635 30 720 490 M48 80 7045 6690 6350600 609.6 210 780 656 30 745 516 M48 80 7045 6690 6350650 660.4 218 870 711 30 800 556 M56 80 9090 8635 8175700 711.2 218 920 762 30 850 581 M56 80 9090 8635 8175

Nom Pipe Pipe Max Ld (Kg)Size O/D A B C D E F G H 560ºC 580ºC 600ºC200 219.0 204 360 255 24 330 318 M42 80 5615 5340 5050250 273.0 210 420 315 30 390 346 M48 80 7040 6695 6340300 323.9 210 471 366 30 440 371 M48 80 7040 6695 6340350 355.6 218 545 398 30 465 400 M56 80 9080 8630 8180400 406.4 218 595 448 30 515 425 M56 80 9080 8630 8180450 457.2 218 650 499 30 575 451 M56 80 13020 12365 11710500 508.0 226 705 560 36 645 491 M64 80 13020 12365 11710550 558.8 234 790 641 36 725 529 M72 80 13020 12365 11710600 609.6 234 810 662 36 750 555 M72 80 13020 12365 11710650 660.4 234 875 725 42 810 582 M72 80 16625 15800 14960700 711.2 234 945 775 42 860 607 M72 80 16625 15800 14960750 762.0 234 1105 838 56 1005 633 M72 80 16625 15800 14960900 914.4 234 1205 1000 56 1155 709 M72 80 16625 15800 14960


Page 45

A

T

B

EC


When ordering specify:Figure No.Beam Width BBeam Flange Thickness T

T

C B

A

E


When ordering specify:Figure No.Beam Width BBeam Flange Thickness T

FIG. 126 ADJUSTABLE BEAM A TTACHMENT

FIG. 125 ADJUSTABLE BEAM A TTACHMENT

B + 150 * 140 M16 * 1045

A Kg B C E Max T Max Load

E MaxB C Max T Load KgA

Min=B/2 + 120Max =1000 * 140 M16 * 1045


Page 46

G

E

BA

FC

G

M.S. FLAT D


When ordering specify:Figure No.SizeFixing hole size.

FIG. 610 WALL/STEEL BRACKET

GE

B

D

F

F

CAANGLE H

PLATE J


When ordering specify:Figure No.SizeHole Size GFixing hole size.Dimension E

FIG. 620 WALL/STEEL BRACKET

MaxSize A B C E F G Load Kg

1 460 380 305 30 76 14 2402 610 535 460 30 76 14 2403 760 685 610 30 76 18 2504 915 840 760 30 76 18 2505 1070 990 915 30 76 22 280

D

100x12100x15

Flat

100x10100x10100x12

Plate MaxSize A B C D E F G J Load

1 305 305 230 50 14 6 3002 460 460 380 50 14 6 3153 610 610 520 50 18 6 5604 760 760 645 65 18 6 620

Angle H

50x50x650x50x650x50x8

60x60x10

See Notes

See Notes


Page 47

FIG. 630 MEDIUM WELDED STEEL BRACKET

12

C

E

G

F

BA20

D H Ø

ANGLE J

Size A B C D E F G H Angle J1 465 395 305 110 40 30 65 22 40X40X62 615 545 460 130 50 30 65 22 50X50X63 770 700 610 130 50 30 65 22 50X50X6

Maximum Load - 730 KgMaterial - Carbon Steel

When ordering specify:Figure No.Size

FIG. 640 HEAVY WELDED STEEL BRACKET

DJ

20

ONE HOLESIZE 1 BRACKET ONLY

HØ

E

G12C

BA

F

ANGLE K

Size A B C D E F G H J Angle K1 470 390 305 110 40 30 70 22 - 40x40x62 615 454 460 130 50 35 70 22 70 50x50x83 760 700 610 130 65 40 70 26 65 60x60x84 925 845 765 130 65 40 80 26 65 60x60x85 1075 990 915 160 90 40 80 26 90 80x80x106 1270 1170 1065 160 90 40 90 26 90 80x80x10

Maximum Load - 730 KgMaterial - Carbon Steel

When ordering specify:Figure No.Size


Page 48

W

100

H

B L

FIG 12L PIPE CLAMP


When orderingspecify:Figure No.Nom Pipe Size

FIG 12L PIPE CLAMP

W

H

100

B L


When orderingspecify:Figure No.Nom Pipe Size

FIG. 650 CLAMPED PIPE SHOE

FIG. 660 CLAMPED PIPE SHOE

Nom PipeSize 20 25 32 40 50 65 80 90 100 125 150

B 102 102 102 102 102 102 102 102 102 102 102H 114 117 121 125 131 138 145 151 158 170 185L 200 200 200 200 200 200 200 200 200 200 200W 100 116 124 140 150 180 190 200 240 280 316

Nom PipeSize 200 250 300 350 400 450 500 600

B 133 133 133 203 203 203 203 203H 210 237 262 278 304 329 354 405L 300 300 300 300 300 300 300 300W 380 450 500 540 590 670 724 860


Page 49

20 to 150Nom Pipe Size Nom Pipe Size

200 to 600

FIG. 12L PIPE CLAMPFIG. 12L PIPE CLAMP

B L

100

H

100

H

B L


When ordering specify:Figure No.Nom Pipe Size

FIG. 670 SLIDING PIPE SHOE

Nom Pipe Size20 to 150

Nom Pipe Size200 to 600

H

100

B LB L

100

H

FIG. 12L PIPE CLAMPFIG. 12L PIPE CLAMP


When ordering specify:Figure No.Nom Pipe Size

FIG. 680 SLIDING PIPE SHOE

Nom PipeSize 20 25 32 40 50 65 80 90 100 125 150 200 250 300 350 400 450 500 600

B 102 102 102 102 102 102 102 102 102 102 102 133 133 133 203 203 203 203 203H 228 234 242 150 262 276 290 302 316 340 370 420 474 524 556 608 658 708 810L 200 200 200 200 200 200 200 200 200 200 200 300 300 300 300 300 300 300 300

Nom PipeSize 20 25 32 40 50 65 80 90 100 125 150 200 250 300 350 400 450 500 600

B 102 102 102 102 102 102 102 102 102 102 102 133 133 133 203 203 203 203 203H 228 234 242 150 262 276 290 302 316 340 370 420 474 524 556 608 658 708 810L 200 200 200 200 200 200 200 200 200 200 200 300 300 300 300 300 300 300 300


Page 50

FIG. 690 ELBOW HANGER(SRWE) (LRWE)

D Rod M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72Mak Load Kg 560 1040 1630 2360 3750 5460 7480 9820 13560 17900 22740

Thickness 6 10 10 12 15 20 25 25 25 25 25W 90 90 90 125 125 175 175 215 220 260 300R 25 35 40 50 60 75 85 95 110 130 150H 15 18 22 27 32 39 48 53 59 69 79

Nom Pipe 65 80 90 100 125 150 200 250 300 350 400 450 500Pipe O/D 76.1 88.9 101.6 114.3 139.7 168.3 219.1 273.0 323.9 355.6 406.4 457.0 508.0

B 278 278 280 288 292 297 308 320 327 328 337 342 354A 65 80 90 100 125 150 200 250 300 350 400 450 500

D Rod M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72Mak Load Kg 560 1040 1630 2360 3750 5460 7480 9820 13560 17900 22740

Thickness 6 10 10 12 15 20 25 25 25 25 25W 90 90 90 125 125 175 175 215 220 260 300R 25 35 40 50 60 75 85 95 110 130 150H 15 18 22 27 32 39 48 53 59 69 79

Nom Pipe 65 80 90 100 125 150 200 250 300 350 400 450 500Pipe O/D 76.1 88.9 101.6 114.3 139.7 168.3 219.1 273.0 323.9 355.6 406.4 457.0 508.0

B 264 268 270 272 268 266 262 257 245 226 220 215 205A 97.5 120 135 150 187 225 300 375 450 525 600 675 750

H

R

10

25

50 MINB

W

A = 1 xNOM PIPE

100 MAX INSULATION

D

Material - Carbon SteelWhen orderingspecify:Figure NoElbow SizeRod Dia

Elbow Hanger (SR WE)

Elbow Hanger (SR WE)

Elbow Hanger (LR WE)

Elbow Hanger (LR WE)

C

D SQUARE

S NOM TUBE

NOTE : NO HOLEIN PARENT PIPE

T

S NOM TUBE

T

F SQUAREE

TG SQUAREL

HOLES

Nom Pipe Pipe Max Holes S Nom Max VertSize O/D L C D E F G H T Tube Load (kg)65 76.1 300 114 150 165 200 100 2-14 6 50 20580 88.9 300 114 150 165 200 100 2-14 6 50 36590 101.6 300 114 150 165 200 100 2-14 6 50 454

100 114.3 600 152 200 215 265 130 4-22 10 80 544125 139.7 600 152 200 215 265 130 4-22 10 80 907150 168.3 600 152 200 215 265 130 4-22 10 80 1134200 219.1 600 203 250 250 300 160 4-22 10 100 1360250 273.0 600 203 250 250 300 180 4-22 10 150 1724300 323.9 600 241 300 250 300 180 4-22 10 150 1814350 355.6 600 241 300 300 350 220 4-22 12 150 2721400 406.4 900 290 350 300 350 240 4-22 12 200 2948450 457.0 900 290 350 300 350 240 4-22 12 200 3175500 508.0 1100 330 400 360 430 300 4-26 15 250 3630600 610.0 1100 330 400 360 430 300 4-26 15 250 4080

Rigid Base Support / Sliding Base Support

FIG. 700/701

Material - Carbon SteelWhen ordering specify:Figure No.Nominal Pipe SizeHeight LFor horizontal pipe or forlong or short radius weldingelbows.

Variable SpringSupports

Section 3

Variable spring support units are devices used to support pipework which is subject tovertical displacement because of temperature changes or subsidence. It isrecommended that a variable spring support unit only be used when the load variationis less than 20% from cold to hot load and that the displacement is small, up to 50mm. Where the conditions are out of this criteria a QUALITY PIPE SUPPORTSconstant spring support should be considered. Practical and technical advice isavailable from QUALITY PIPE SUPPORTS.

All units are pre-set to their cold load. Each unit will have been checked through itstotal working range and its required working range. The variable spring unit will betested on a specialised test rig which is calibrated back to a national standard.

The variable spring support finish is available as follows:

l Hammer finish paintl Hot dip galvanised (ISO 1461) 1999l Customer specific paint finish.

Spring coils are plastic coated on standard galvanized units.

Q.P.S. variable spring units are produced in high quality carbon steel, but we are ableto offer units from austenitic stainless steel and various alloy steels where required.

Where a spring units is required which is not covered by the Q.P.S. range, ourtechnical department will design a unit for your particular requirement.

All Quality Variable Support units are capable of supporting pipework that can besubjected to hydrostatic test loads up to two times the working load of the unit.

ORDERING

When ordering please specify:

l Q.V. number, e.g. (Q.V. 2).

l Model, e.g. (A, B, D etc.).

l Size (taken from selection table).

l Thread details.

l Vertical movement and direction of movement, e.g. cold to hot, 16 mm up.

l Preset load (Q.P.S. can calculate this for you given the information as above.

l If Hydrostatic stops are required.

l Protective finish

l Marking (identification) number

l Distance between rod centres and total load for model “G”.

Page 51

DESCRIPTION

Page 52

HOW TO SELECT THE APPROPRIATE VARIABLE SIZE (0-22)INFORMATION NEEDED:SUPPORTED LOAD = Load calculated when pipe is in the hot position

including insulation, contents, weight of pipe andancillary equipment.

INITIAL SELECTION = Select size by plotting load in table.TRAVEL UPOR = Distance pipelines moves and in what direction.TRAVEL DOWNPRESET LOAD = Calculate by multiplying the spring rate from the table

by the TRAVEL UP (+) or TRAVEL DOWN (-) and addingto SUPPORTED LOAD.

Example Size 8 Supported Load = 366KgQV1 Travel Up 3mm

x Spring Rate 5.4 = 16.2 KgPreset Load = 382.2 Kg

SELECTION PROCEDURE:After initial selection in the support table and calculation of preset load check the preset loadand travel are within range shown for size.Then check load change at cold position is within ± 20% of hot load as follows:

PRESET LOAD 382.2x 100 (using the above example) x 100 = 104.4%

SUPPORTED LOAD 366Acceptable, if not rework calculations using QV2 or QV3. Spring rates if still not within ± 20%consider constant load support. Look up 366 Kg in table, located in Column 8 (Spring Size),move down 3mm as travel is up, to check still within working range. If it is then size iscorrect, if not, move up or down a size and repeat selection.

EXAMPLE WHERE FIRST SELECTION IS INCORRECT:Supported Load = 366Travel Up 50mm Preset Loadx Spring Rate 5.4 = 270 = 173%

Supported LoadPreset Load = 636TRY QV3Supported Load = 366Travel Up 50mm Preset Load 431x Spring Rate 1.3 = 65 = 118%

Supported Load 366Preset Load = 431

Acceptable and within range so selection would be QV3 Size 8 Preset Load 431, Hot Load366.NOTE: The preset load is in over travel, which is acceptable in this case. Do not select whenhot load is in over travel. The supports have been designed to perform best inside theworking range.

TO CALCULATE ROD TAKE OUT:Look up minimum rod take out in the table for model size and type selected, this is thedimension in the minimum load position. Then determine on working range scale where thepreset load is positioned or add to dimension shown in tables, using the above as anexample.

QV3 say Model A Size 8 look up table = 463mmPreset Load at 431 read on scale = 141mmRod take out = 604mm

TO CALCULATE LOADED LENGTH OF MODEL F:Look up maximum loaded length in table for model, size and type selected. Then determineon working range scale where preset load is positioned and subtract from dimension shown.Example QV2 Size 16 Present Load = 3506.5 Kg

Maximum dimension form table = 543mmPreset Load read on scale at 542Loaded length 501mm

SELECTION PROCEDURE

Page 53

Variable Spring SupportsDiagrams and Tables

Pag

e 54

VARIABLE SPRING SUPPORTS VARIABLE SPRING SELECTION TABLE

QV4 QV3

Figure QV1Figure QV2Figure QV3Figure QV4Size of Variable

QV2 QV1 QV2 QV3 QV4

30 20 10 5

0 0 0 0

30 20 10 5

60 40 20 10

90 60 30 15

120 80 40 20

WO

RK

ING

RA

NG

E O

F S

PR

ING

150 100 50 25

180 120 60 30

210 140 70 35

30 20 10 5

0 0 0 0

5 10 20 30

10 20 40 60

15 30 60 90

20 40 80 120

25 50 100 150

30 60 120 180

35 70 140 210

5 10 20 30

Travel in mm. Load in Newtons.W

OR

KIN

G R

AN

GE

OF

SP

RIN

G

OverTravel

OverTravel

Min.Working

Load

Max.Working

Load

Figure QV1Figure QV2Figure QV3Figure QV4

Size of Variable

OverTravel

Max.Working

Load

Min.Working

Load

OverTravel5 10 20 30

QV112 13 14 15 16 17 18 19 20 21 226218 8291 11054 14923 20726 27635 36799 48869 64978 86359 1151716376 8501 11334 15301 21251 28336 37731 50109 66624 88548 1180906533 8711 11614 15679 21777 29036 38662 51349 68270 90737 1210106691 8922 11895 16058 22302 29737 39594 52589 69917 92926 1239296848 9132 12175 16436 22828 30437 40526 53829 71563 95115 1268497006 9342 12455 16814 23353 31138 41458 55069 73209 97305 1297687164 9552 12735 17192 23878 31838 42389 56308 74855 99494 1326877321 9762 13015 17570 24404 32539 43321 57548 76501 101683 1356077479 9973 13296 17949 24929 33239 44253 58788 78148 103872 1385267636 10183 13576 18327 25455 33940 45184 60028 79794 106061 1414467794 10393 13856 18705 25980 34640 46116 61268 81440 108250 1443657952 10603 14136 19083 26505 35341 47048 62508 83086 110439 1472848109 10813 14416 19461 27031 36041 47979 63748 84732 112628 1502048267 11024 14697 19840 27556 36742 48911 64988 86379 114817 1531238424 11234 14977 20218 28082 37442 49843 66228 88025 117006 1560438582 11444 15257 20596 28607 38143 50775 67468 89671 119196 1589628740 11654 15537 20974 29132 38843 51706 68707 91317 121385 1618818897 11864 15817 21352 29658 39544 52638 69947 92963 123574 1648019055 12075 16098 21731 30183 40244 53570 71187 94610 125763 1677209212 12285 16378 22109 30709 40945 54501 72427 96256 127952 1706409370 12495 16658 22487 31234 41645 55433 73667 97902 130141 1735599528 12705 16938 22865 31759 42346 56365 74907 99548 132330 1764789685 12915 17218 23243 32285 43046 57296 76147 101194 134519 1793989843 13126 17499 23622 32810 43747 58228 77387 102841 136708 182317

10000 13336 17779 24000 33336 44447 59160 78627 104487 138897 18523710158 13546 18059 24378 33861 45148 60092 79867 106133 141087 18815610316 13756 18339 24756 34386 45848 61023 81106 107779 143276 19107510473 13966 18619 25134 34912 46549 61955 82346 109425 145465 19399510631 14177 18900 25513 35437 47249 62887 83586 111072 147654 19691410788 14387 19180 25891 35963 47950 63818 84826 112718 149843 19983410946 14597 19460 26269 36488 48650 64750 86066 114364 152032 20275311104 14807 19740 26647 37013 49351 65682 87306 116010 154221 20567211261 15017 20020 27025 37539 50051 66613 88546 117656 156410 20859211419 15228 20301 27404 38064 50752 67545 89786 119303 158599 21151111576 15438 20581 27782 38590 51452 68477 91026 120949 160788 21443111734 15648 20861 28160 39115 52153 69409 92266 122595 162978 21735011892 15858 21141 28538 39640 52853 70340 93505 124241 165167 22026912049 16068 21421 28916 40166 53554 71272 94745 125887 167356 22318912207 16279 21702 29295 40691 54254 72204 95985 127534 169545 22610812364 16489 21982 29673 41217 54955 73135 97225 129180 171734 22902812522 16699 22262 30051 41742 55655 74067 98465 130826 173923 23194712680 16909 22542 30429 42267 56356 74999 99705 132472 176112 23486612837 17119 22822 30807 42793 57056 75930 100945 134118 178301 23778612995 17330 23103 31186 43318 57757 76862 102185 135765 180490 24070513152 17540 23383 31564 43844 58457 77794 103425 137411 182679 24362513310 17750 23663 31942 44369 59158 78726 104665 139057 184869 246544

157.6 210.2 280.2 378.2 525.4 700.5 931.7 1239.9 1646.2 2189.1 2919.478.8 105.1 140.1 189.1 262.7 350.3 465.9 620.0 823.1 1094.6 1459.739.4 52.6 70.1 94.6 131.4 175.1 232.9 310.0 411.6 547.3 729.9

26.27 35.03 46.70 63.03 87.57 116.75 155.28 206.65 274.37 364.85 486.5712 13 14 15 16 17 18 19 20 21 22

0 1 2 3 4 5 6 7 8 9 10 11196 292 375 485 652 873 1161 1548 2073 2754 3593 4698201 299 384 497 669 895 1190 1587 2126 2824 3684 4817207 307 394 510 685 917 1220 1626 2178 2894 3775 4936212 314 403 522 702 939 1249 1666 2231 2964 3866 5055217 322 413 534 718 961 1279 1705 2283 3034 3957 5174223 329 422 547 735 984 1308 1744 2336 3105 4049 5294228 336 431 559 751 1006 1337 1783 2388 3175 4140 5413233 344 441 571 768 1028 1367 1822 2441 3245 4231 5532238 351 450 583 784 1050 1396 1862 2493 3315 4322 5651244 359 460 596 801 1072 1426 1901 2546 3385 4413 5770249 366 469 608 817 1094 1455 1940 2598 3455 4504 5889254 373 478 620 834 1116 1484 1979 2651 3525 4595 6008260 381 488 633 850 1138 1514 2018 2703 3595 4686 6127265 388 497 645 867 1160 1543 2058 2756 3665 4777 6246270 396 507 657 883 1182 1573 2097 2808 3735 4868 6365276 403 516 670 900 1205 1602 2136 2861 3806 4960 6485281 410 525 682 916 1227 1631 2175 2913 3876 5051 6604286 418 535 694 933 1249 1661 2214 2966 3946 5142 6723291 425 544 706 949 1271 1690 2254 3018 4016 5233 6842297 433 554 719 966 1293 1720 2293 3071 4086 5324 6961302 440 563 731 982 1315 1749 2332 3123 4156 5415 7080307 447 572 743 999 1337 1778 2371 3176 4226 5506 7199313 455 582 756 1015 1359 1808 2410 3228 4296 5597 7318318 462 591 768 1032 1381 1837 2450 3281 4366 5688 7437323 470 601 780 1048 1403 1867 2489 3333 4436 5779 7556329 477 610 793 1065 1426 1896 2528 3386 4507 5871 7676334 484 619 805 1081 1448 1925 2567 3438 4577 5962 7795339 492 629 817 1098 1470 1955 2606 3491 4647 6053 7914344 499 638 829 1114 1492 1984 2646 3543 4717 6144 8033350 507 648 842 1131 1514 2014 2685 3596 4787 6235 8152355 514 657 854 1147 1536 2043 2724 3648 4857 6326 8271360 521 666 866 1164 1558 2072 2763 3701 4927 6417 8390366 529 676 879 1180 1580 2102 2802 3753 4997 6508 8509371 536 685 891 1197 1602 2131 2842 3806 5067 6599 8628376 544 695 903 1213 1624 2161 2881 3858 5137 6690 8747382 551 704 916 1230 1647 2190 2920 3911 5208 6782 8867387 558 713 928 1246 1669 2219 2959 3963 5278 6873 8986392 566 723 940 1263 1691 2249 2998 4016 5348 6964 9105397 573 732 952 1279 1713 2278 3038 4068 5418 7055 9224403 581 742 965 1296 1735 2308 3077 4121 5488 7146 9343408 588 751 977 1312 1757 2337 3116 4173 5558 7237 9462413 595 760 989 1329 1779 2366 3155 4226 5628 7328 9581419 603 770 1002 1345 1801 2396 3194 4278 5698 7419 9700424 610 779 1014 1362 1823 2425 3234 4331 5768 7510 9819429 618 789 1026 1378 1845 2455 3273 4383 5838 7601 9938435 625 798 1039 1395 1868 2484 3312 4436 5909 7693 10058

5.3 7.4 9.4 12.3 16.5 22.1 29.4 39.2 52.5 70.1 91.1 119.12.6 3.7 4.7 6.2 8.3 11.1 14.7 19.6 26.3 35.1 45.6 59.61.3 1.9 2.4 3.1 4.1 5.5 7.4 9.8 13.1 17.5 22.8 29.8

0.87 1.23 1.57 2.05 2.75 3.68 4.90 6.53 8.75 11.68 15.18 19.850 1 2 3 4 5 6 7 8 9 10 11

Spring Rate in N per millimetre

Page 55

QUALITY PIPE SUPPORTS VARIABLE SPRING SELECTION T ABLE

QV4 QV3 QV2 QV1 QV1 QV2 QV3 QV4

30 20 10 5

0 0 0 0

30 20 10 5

60 40 20 10

90 60 30 15

120 80 40 20

150 100 50 25

180 120 60 30

210 140 70 35

30 20 10 5

5 10 20 30

0 0 0 0

5 10 20 30

10 20 40 60

15 30 60 90

20 40 80 120

25 50 100 150

30 60 120 180

35 70 140 210

5 10 20 30

Travel in mm. Load in kilograms.

WO

RK

ING

RA

NG

E O

F S

PR

ING

WO

RK

ING

RA

NG

E O

F S

PR

ING

OverTravel

OverTravel

OverTravel

OverTravel

Min.Working

Load

Max.Working

Load

Min.Working

Load

Max.Working

Load

Figure QV1Figure QV2Figure QV3Figure QV4Size of Variable

Figure QV1Figure QV2Figure QV3Figure QV4

Size of Variable

0 1 2 3 4 5 6 7 8 9 10 1120.0 29.0 38.0 49.0 66 88 118 158 211 282 366 47920.5 29.8 39.0 50.3 68 90 121 162 216 289 375 49121.1 30.5 39.9 51.5 69 92 124 166 222 296 384 50321.6 31.3 40.9 52.8 71 95 127 170 227 303 394 51522.1 32.0 41.8 54.0 72 97 130 174 233 310 403 52722.7 32.8 42.8 55.3 74 99 133 178 238 318 412 54023.2 33.5 43.8 56.5 76 101 136 182 243 325 421 55223.7 34.3 44.7 57.8 77 103 139 186 249 332 430 56424.2 35.0 45.7 59.0 79 106 142 190 254 339 440 57624.8 35.8 46.6 60.3 80 108 145 194 260 346 449 58825.3 36.5 47.6 61.5 82 110 148 198 265 353 458 60025.8 37.3 48.6 62.8 84 112 151 202 270 360 467 61226.4 38.0 49.5 64.0 85 114 154 206 276 367 476 62426.9 38.8 50.5 65.3 87 117 157 210 281 374 486 63627.4 39.5 51.4 66.5 88 119 160 214 287 381 495 64828.0 40.3 52.4 67.8 90 121 163 218 292 389 504 66128.5 41.0 53.4 69.0 92 123 166 222 297 396 513 67329.0 41.8 54.3 70.3 93 125 169 226 303 403 522 68529.5 42.5 55.3 71.5 95 128 172 230 308 410 532 69730.1 43.3 56.2 72.8 96 130 175 234 314 417 541 70930.6 44.0 57.2 74.0 98 132 178 238 319 424 550 72131.1 44.8 58.2 75.3 100 134 181 242 324 431 559 73331.7 45.5 59.1 76.5 101 136 184 246 330 438 568 74532.2 46.3 60.1 77.8 103 139 187 250 335 445 578 75732.7 47.0 61.0 79.0 104 141 190 254 341 452 587 76933.3 47.8 62.0 80.3 106 143 193 258 346 460 596 78233.8 48.5 63.0 81.5 108 145 196 262 351 467 605 79434.3 49.3 63.9 82.8 109 147 199 266 357 474 614 80634.8 50.0 64.9 84.0 111 150 202 270 362 481 624 81835.4 50.8 65.8 85.3 112 152 205 274 368 488 633 83035.9 51.5 66.8 86.5 114 154 208 278 373 495 642 84236.4 52.3 67.8 87.8 116 156 211 282 378 502 651 85437.0 53.0 68.7 89.0 117 158 214 286 384 509 660 86637.5 53.8 69.7 90.3 119 161 217 290 389 516 670 87838.0 54.5 70.6 91.5 120 163 220 294 395 523 679 89038.6 55.3 71.6 92.8 122 165 223 298 400 531 688 90339.1 56.0 72.6 94.0 124 167 226 302 405 538 697 91539.6 56.8 73.5 95.3 125 169 229 306 411 545 706 92740.1 57.5 74.5 96.5 127 172 232 310 416 552 716 93940.7 58.3 75.4 97.8 128 174 235 314 422 559 725 95141.2 59.0 76.4 99.0 130 176 238 318 427 566 734 96341.7 59.8 77.4 100.3 132 178 241 322 432 573 743 97542.3 60.5 78.3 101.5 133 180 244 326 438 580 752 98742.8 61.3 79.3 102.8 135 183 247 330 443 587 762 99943.3 62.0 80.2 104.0 136 185 250 334 449 594 771 101143.9 62.8 81.2 105.3 138 187 253 338 454 602 780 1024

0.53 0.75 0.96 1.25 1.60 2.2 3.0 4.0 5.4 7.1 9.2 12.10.27 0.38 0.48 0.63 0.80 1.1 1.5 2.0 2.7 3.6 4.6 6.10.13 0.19 0.24 0.31 0.40 0.6 0.8 1.0 1.4 1.8 2.3 3.00.09 0.13 0.16 0.21 0.27 0.37 0.50 0.67 0.90 1.18 1.53 2.02

0 1 2 3 4 5 6 7 8 9 10 11

12 13 14 15 16 17 18 19 20 21 22634 845 1127 1521 2113 2818 3752 4983 6625 8806 11744650 866 1156 1560 2167 2889 3847 5109 6793 9029 12042666 888 1184 1598 2220 2961 3942 5236 6961 9252 12339682 909 1213 1637 2274 3032 4037 5362 7129 9476 12637698 931 1241 1675 2327 3104 4132 5489 7297 9699 12934714 952 1270 1714 2381 3175 4227 5615 7465 9922 13232730 973 1299 1753 2435 3246 4322 5741 7633 10145 13530746 995 1327 1791 2488 3318 4417 5868 7801 10368 13827762 1016 1356 1830 2542 3389 4512 5994 7969 10592 14125778 1038 1384 1868 2595 3461 4607 6121 8137 10815 14422794 1059 1413 1907 2649 3532 4702 6247 8305 11038 14720810 1080 1442 1946 2703 3603 4797 6373 8473 11261 15018826 1102 1470 1984 2756 3675 4892 6500 8641 11484 15315842 1123 1499 2023 2810 3746 4987 6626 8809 11708 15613858 1145 1527 2061 2863 3818 5082 6753 8977 11931 15910874 1166 1556 2100 2917 3889 5177 6879 9145 12154 16208890 1187 1585 2139 2971 3960 5272 7005 9313 12377 16506906 1209 1613 2177 3024 4032 5367 7132 9481 12600 16803922 1230 1642 2216 3078 4103 5462 7258 9649 12824 17101938 1252 1670 2254 3131 4175 5557 7385 9817 13047 17398954 1273 1699 2293 3185 4246 5652 7511 9985 13270 17696970 1294 1728 2332 3239 4317 5747 7637 10153 13493 17994986 1316 1756 2370 3292 4389 5842 7764 10321 13716 182911002 1337 1785 2409 3346 4460 5937 7890 10489 13940 185891018 1359 1813 2447 3399 4532 6032 8017 10657 14163 188861034 1380 1842 2486 3453 4603 6127 8143 10825 14386 191841050 1401 1871 2525 3507 4674 6222 8269 10993 14609 194821066 1423 1899 2563 3560 4746 6317 8396 11161 14832 197791082 1444 1928 2602 3614 4817 6412 8522 11329 15056 200771098 1466 1956 2640 3667 4889 6507 8649 11497 15279 203741114 1487 1985 2679 3721 4960 6602 8775 11665 15502 206721130 1508 2014 2718 3775 5031 6697 8901 11833 15725 209701146 1530 2042 2756 3828 5103 6792 9028 12001 15948 212671162 1551 2071 2795 3882 5174 6887 9154 12169 16172 215651178 1573 2099 2833 3935 5246 6982 9281 12337 16395 218621194 1594 2128 2872 3989 5317 7077 9407 12505 16618 221601210 1615 2157 2911 4043 5388 7172 9533 12673 16841 224581226 1637 2185 2949 4096 5460 7267 9660 12841 17064 227551242 1658 2214 2988 4150 5531 7362 9786 13009 17288 230531258 1680 2242 3026 4203 5603 7457 9913 13177 17511 233501274 1701 2271 3065 4257 5674 7552 10039 13345 17734 236481290 1722 2300 3104 4311 5745 7647 10165 13513 17957 239461306 1744 2328 3142 4364 5817 7742 10292 13681 18180 242431322 1765 2357 3181 4418 5888 7837 10418 13849 18404 245411338 1787 2385 3219 4471 5960 7932 10545 14017 18627 248381354 1808 2414 3258 4525 6031 8027 10671 14185 18850 25136

16.0 21.4 28.6 38.6 53.6 71.4 95.0 126.4 168.0 223.2 297.68.0 10.7 14.3 19.3 26.8 35.7 47.5 63.2 84.0 111.6 148.84.0 5.4 7.2 9.7 13.4 17.9 23.8 31.6 42.0 55.8 74.42.67 3.57 4.77 6.43 8.93 11.90 15.83 21.07 28.00 37.20 49.6012 13 14 15 16 17 18 19 20 21 22

Spring Rate in kgs per millimetre

Page 56

VARIABLE SPRING SUPPORTS

MODEL 'B'

BEFORE SELECTING THE SIZEWORKING LOAD MUST BE HALVEDNOTE : ON TYPE 'G' UNITS THE

O

W

D DIA

RODTAKEOUT

W

MODEL 'F'MODEL 'A'

MODEL 'E'

O

RODTAKEOUT

A

W

MODEL 'G'REQUIRED

X

N

ARODTAKEOUT

O

W A

LOADEDLENGTH

'Y'

P.C.D.

W

MODEL 'D'MODEL 'C'

A

SEE MODEL 'F' FOR

MODEL 'H'

OTHER DETAILS

RADIUS TO SUITCUSTOMERSREQUIREMENTS

MODEL 'K'

OTHER DETAILSSEE MODEL 'F' FOR

P

J

RODTAKEOUT

AA

O O

W

D DIAB

T

C

GT B

C

RODTAKEOUT

A

W

O

FLOAD FLANGE

(P.T.F.E. SLIDER OPTIONAL)

FIG. QV1

MODEL ‘A’ MODEL ‘F’ MODEL ‘B’ MODEL ‘C’ MODEL ‘D’

MODEL ‘E’ MODEL ‘G’ MODEL ‘H’ MODEL ‘K’

Page 57

QUALITY PIPE SUPPORTS

RODSIZE

OutsideDia.of

Casing

O A B&C E G W A,B,C D,E,G F D C B G T

PlateThick-ness

BasePlate

Square

PCDBasePlate

BasePlateBolt

SpringHanger

SizeMin MinMax MaxF F GJ P A,B,C D,E

LoadPlate

Square

LoadPlateThick-ness

SpaceBetweenBeams

X

CHANNELSECTION

900mm1800mm

Rod to RodCentre CentreN

MODEL MODEL

MODEL B & C

DIMENSIONS OF LUGS

MODEL F BASE PLATEMODEL G LOADED LENGTH H

MODEL D

LOADEDLENGTH Y

ROLLERDIMS.

MODEL F MODEL K MODEL

SPRING WEIGHT(Approx. in Kgs)

MODEL FLOAD PLATE

ROD TAKE OUTCasing

Length A

SpringHanger

Size

QV1 TRAVEL RANGE 35mm

132 6 16 26 50 15 198 233 60 180 215 115 60 2.5 2 6 12 0

132 6 16 26 50 15 206 241 60 185 220 115 60 2.5 3 6 12 1

132 6 16 26 50 15 221 256 60 205 240 115 60 2.5 3.5 6 12 2

132 6 20 26 76 38 209 244 60 195 230 115 60 4 4 9 14 3

132 6 20 26 76 38 219 254 60 205 240 115 60 5 4.5 9 15 4

132 6 20 26 76 38 228 263 60 215 250 115 60 6 6 10 16 5

152 10 25 52 76 38 233 268 60 225 260 115 60 8 7 16 22 6

152 10 25 52 76 38 248 283 60 235 270 115 60 9 8 16 24 7

152 10 25 52 76 38 255 290 60 243 278 115 60 11 9.5 16 25 8

181 12 32 52 102 51 271 306 60 272 307 155 65 19 20 32 48 9

181 12 32 52 102 51 283 318 60 285 320 155 65 23 23 33 52 10

181 12 32 52 102 51 252 287 60 252 287 155 65 22 19 33 48 11

181 12 38 39 127 64 272 307 60 260 295 155 65 22 21 33 52 12

181 12 38 74 127 64 307 342 60 295 330 155 65 28 26 34 62 13

181 12 38 74 127 64 314 349 60 299 334 155 65 28 27 39 65 14

201 15 54 26 152 76 332 367 65 305 340 155 70 35 32 39 79 15

201 15 54 52 152 76 363 398 65 340 375 155 70 41 38 47 90 16

201 15 54 52 152 76 386 421 65 375 410 155 70 49 45 52 112 17

252 20 60 10 254 89 422 457 90 395 430 205 85 103 92 115 230 18

252 20 60 26 254 89 446 481 90 420 455 205 85 115 105 116 245 19

252 20 60 26 254 89 494 529 90 470 505 205 85 142 130 148 302 20

252 20 79 26 305 102 556 591 125 495 530 205 110 175 150 152 380 21

252 20 79 74 305 102 675 710 135 605 640 205 120 215 200 195 460 22

0 M12 125 195 102 47 119 170 142 139 18 38 31 23 6 6 151 162 M16

1 M12 132 202 111 44 119 180 152 144 18 38 31 23 6 6 151 162 M16

2 M12 142 212 126 39 119 195 167 164 18 38 31 23 6 6 151 162 M16

3 M12 130 200 113 54 159 180 152 149 18 38 31 23 6 6 202 195 M20

4 M12 140 210 124 54 159 190 162 159 18 38 31 23 6 6 202 195 M20

5 M12 145 215 132 49 159 200 172 169 18 38 31 23 6 6 202 195 M20

6 M16 146 220 137 44 179 215 186 177 23 38 31 28 10 8 222 205 M20

7 M16 151 225 152 29 179 235 206 187 23 38 31 28 10 8 222 205 M20

8 M16 151 225 160 29 179 235 206 195 23 38 31 28 10 8 222 205 M20

9 M20 161 244 166 55 239 260 216 211 27 38 33 32 10 8 261 272 M20

10 M20 150 233 178 34 239 270 226 221 27 38 33 32 10 8 261 270 M20

11 M20 151 246 146 65 239 240 196 191 27 50 34 37 10 8 261 270 M20

12 M24 152 247 156 90 239 255 208 196 33 50 34 40 12 8 261 270 M20

13 M30 180 311 191 71 239 300 260 236 39 76 50 47 12 8 261 270 M20

14 M30 192 323 198 83 239 300 260 240 39 76 50 47 12 8 261 270 M20

15 M30 213 349 211 92 249 320 277 249 39 76 50 50 12 10 261 270 M20

16 M36 240 376 242 79 249 360 317 280 45 76 65 61 20 10 261 270 M20

17 M42 266 412 255 85 249 380 337 304 52 86 75 68 20 10 261 270 M20

18 M48 275 422 280 -27 319 390 350 308 60 105 75 74 20 12 352 398 M24

19 M56 305 475 308 -11 319 415 375 333 69 115 85 80 20 12 352 398 M24

20 M64 362 532 360 -15 319 465 430 389 74 115 100 87 25 12 352 398 M24

21 M72 345 524 395 -58 319 505 465 419 85 115 100 91 25 15 352 398 M24

22 M80 455 652 500 -20 319 615 571 529 94 128 100 100 25 15 352 398 M24

Page 58


MODEL 'B'


O

W

D DIA

RODTAKEOUT

W

MODEL 'F'MODEL 'A'

MODEL 'E'

O

RODTAKEOUT

A

W

MODEL 'G'REQUIRED

X

N

ARODTAKEOUT

O

W A

LOADEDLENGTH

'Y'

P.C.D.

W

MODEL 'D'MODEL 'C'

A

SEE MODEL 'F' FOR

MODEL 'H'

OTHER DETAILS


MODEL 'K'


P

J

RODTAKEOUT

AA

O O

W

D DIAB

T

C

GT B

C

RODTAKEOUT

A

W

O

FLOAD FLANGE


FIG. QV2



Page 59

QUALITY PIPE SUPPORTSQV2 TRAVEL RANGE 70mm

RODSIZE

OutsideDia.of

Casing


PlateThick-ness

BasePlate

Square

PCDBasePlate

BasePlateBolt

SpringHanger


LoadPlate

Square

LoadPlateThick-ness

SpaceBetweenBeams

X

CHANNELSECTION

900mm1800mm


MODEL MODEL

MODEL B & C

DIMENSIONS OF LUGS


MODEL D

LOADEDLENGTH Y

ROLLERDIMS.



MODEL FLOAD PLATE

ROD TAKE OUTCasing

Length A

SpringHanger

Size

0 M12 148 218 147 20 119 220 192 189 18 38 31 23 6 6 151 162 M16

1 M12 185 255 186 17 119 260 232 229 18 38 31 23 6 6 151 162 M16

2 M12 185 255 186 17 119 260 232 229 18 38 31 23 6 6 151 162 M16

3 M12 168 238 162 37 159 235 207 204 18 38 31 23 6 6 202 195 M20

4 M12 175 245 175 24 159 255 227 224 18 38 31 23 6 6 202 195 M20

5 M12 205 275 194 39 159 270 245 239 18 38 31 23 6 6 202 195 M20

6 M16 209 283 200 42 179 280 251 244 23 38 31 28 10 8 222 205 M20

7 M16 232 306 224 40 179 305 276 271 23 38 31 28 10 8 222 205 M20

8 M16 245 319 237 38 179 320 291 284 23 38 31 28 10 8 222 205 M20

9 M20 245 328 234 69 239 330 286 281 27 38 33 32 10 8 261 270 M20

10 M20 275 358 264 69 239 360 316 311 27 38 33 32 10 8 261 270 M20

11 M20 255 350 208 104 239 305 261 256 27 50 34 37 10 8 261 270 M20

12 M24 212 307 227 70 239 335 288 274 33 50 34 40 12 8 261 270 M20

13 M30 285 416 292 81 239 395 355 346 39 76 50 47 12 8 261 270 M20

14 M30 296 427 295 87 239 400 360 346 39 76 50 47 12 8 261 270 M20

15 M30 325 461 300 109 249 415 372 344 39 76 50 50 12 10 261 270 M20

16 M36 375 511 359 94 249 480 437 402 45 76 65 61 20 10 261 270 M20

17 M42 425 571 411 79 249 545 502 454 52 86 75 68 20 10 261 270 M20

18 M48 404 556 393 45 319 490 465 428 60 105 75 74 20 12 352 398 M24

19 M56 475 634 455 50 3319 550 523 483 69 115 85 80 20 12 352 398 M24

20 M64 563 732 538 55 319 640 620 573 74 115 100 87 25 12 352 398 M24

21 M72 605 784 625 65 319 735 718 650 85 1158 100 91 25 15 352 398 M24

22 M80 763 955 775 65 319 900 862 810 94 128 100 100 25 15 352 398 M24

132 6 16 40 50 15 238 308 60 235 305 115 60 3 3 5 14 0

132 6 16 40 50 15 258 328 60 253 323 115 60 4 4 6 14 1

132 6 16 40 50 15 277 347 60 275 345 115 60 4 4 8 15 2

132 6 20 52 76 38 253 323 60 254 324 115 60 5 5 9 16 3

132 6 20 52 76 38 266 336 60 265 335 115 60 6 6 12 16 4

132 6 20 52 76 38 284 354 60 283 353 115 60 8 8 12 19 5

152 10 25 52 76 38 291 361 60 292 362 115 60 12 11 16 28 6

152 10 25 52 76 38 314 384 60 322 392 115 60 13 11 21 28 7

152 10 25 52 76 38 327 397 60 332 402 115 60 13 13 21 32 8

181 12 32 75 102 51 334 404 60 345 415 155 65 24 24 38 58 9

181 12 32 75 102 51 365 435 60 375 445 155 65 29 28 41 63 10

181 12 32 75 102 51 308 378 60 325 395 155 65 27 29 37 60 11

181 12 38 101 127 64 327 397 60 338 408 155 65 27 28 38 62 12

181 12 38 101 127 64 392 462 60 405 475 155 65 38 35 49 82 13

181 12 38 101 127 64 395 465 60 405 475 155 65 38 38 51 85 14

201 15 54 101 152 76 420 490 65 415 485 155 70 43 42 52 110 15

201 15 54 101 152 76 479 549 65 473 543 155 70 56 54 63 120 16

201 15 54 101 152 76 531 601 65 525 595 155 70 68 65 74 146 17

252 20 60 101 254 89 550 620 90 525 595 205 85 140 120 148 290 18

252 20 60 101 254 89 610 680 90 583 653 205 85 160 140 162 335 19

252 20 60 101 254 89 690 760 90 665 735 205 85 210 175 205 430 20

252 20 79 101 305 102 790 860 125 735 805 205 110 252 225 226 545 21

252 20 79 101 305 102 960 1030 135 885 955 205 120 325 245 298 680 22

Page 60


MODEL 'B'


O

W

D DIA

RODTAKEOUT

W

MODEL 'F'MODEL 'A'

MODEL 'E'

O

RODTAKEOUT

A

W

MODEL 'G'REQUIRED

X

N

ARODTAKEOUT

O

W A

LOADEDLENGTH

'Y'

P.C.D.

W

MODEL 'D'MODEL 'C'

A

SEE MODEL 'F' FOR

MODEL 'H'

OTHER DETAILS


MODEL 'K'


P

J

RODTAKEOUT

AA

O O

W

D DIAB

T

C

GT B

C

RODTAKEOUT

A

W

O

FLOAD FLANGE


FIG. QV3



Page 61


RODSIZE

OutsideDia.of

Casing


PlateThick-ness

BasePlate

Square

PCDBasePlate

BasePlateBolt

SpringHanger


LoadPlate

Square

LoadPlateThick-ness

SpaceBetweenBeams

X

CHANNELSECTION

900mm1800mm


MODEL MODEL

MODEL B & C

DIMENSIONS OF LUGS


MODEL D

LOADEDLENGTH Y

ROLLERDIMS.



MODEL FLOAD PLATE

ROD TAKE OUTCasing

Length A

SpringHanger

Size

0 M12 292 362 289 0 119 370 342 334 18 38 31 23 6 6 151 162 M16

1 M12 335 405 330 8 119 405 377 374 18 38 31 23 6 6 151 162 M16

2 M12 365 435 367 -2 119 445 417 414 18 38 31 23 6 6 151 162 M16

3 M12 325 395 319 3 159 400 372 369 18 38 31 23 6 6 202 195 M20

4 M12 362 432 345 10 159 430 402 399 18 38 31 23 6 6 202 195 M20

5 M12 395 465 382 8 159 465 437 434 18 38 31 23 6 6 202 195 M20

6 M16 395 469 387 38 179 470 441 436 23 38 31 28 10 8 222 205 M20

7 M16 456 530 434 49 179 520 491 486 23 38 31 28 10 8 222 205 M20

8 M16 463 537 460 36 179 540 511 506 23 38 31 28 10 8 222 205 M20

9 M20 465 558 454 41 239 555 511 506 27 38 33 32 10 8 261 270 M20

10 M20 532 615 515 48 239 615 571 566 27 38 33 32 10 8 261 270 M20

11 M20 425 520 402 51 239 505 461 456 27 50 34 37 10 8 261 270 M20

12 M24 411 506 438 -3 239 545 498 491 33 50 34 40 12 8 261 270 M20

13 M30 574 705 568 63 239 675 635 626 39 76 50 47 12 8 261 270 M20

14 M30 588 719 574 67 239 685 645 633 39 76 50 47 12 8 261 270 M20

15 M30 593 734 580 22 249 695 652 634 39 76 50 50 12 10 261 270 M20

16 M36 712 854 698 47 249 815 772 744 45 76 65 61 20 10 261 270 M20

17 M42 832 974 802 52 249 930 887 859 52 86 75 68 20 10 261 270 M20

18 M48 792 938 750 87 319 860 840 793 60 105 75 74 20 12 352 398 M24

19 M56 925 1085 866 110 319 980 952 906 69 115 85 80 20 12 352 398 M24

20 M64 1075 1244 1031 89 319 1145 1125 1083 74 115 100 87 25 12 352 398 M24

21 M72 1175 1355 1196 30 319 1315 1301 1235 85 115 100 91 25 15 352 398 M24

22 M80 1483 1675 1504 8 319 1630 1599 1555 94 128 100 100 25 15 352 398 M24

132 6 16 40 50 15 384 524 60 375 515 115 60 6 6 10 16 0

132 6 16 40 50 15 425 565 60 425 565 115 60 6 6 10 18 1

132 6 16 40 50 15 462 602 60 465 605 115 60 8 8 10 20 2

132 6 20 52 76 38 414 554 60 412 552 115 60 9 9 15 24 3

132 6 20 52 76 38 440 580 60 445 585 115 60 12 10 18 26 4

132 6 20 52 76 38 477 617 60 485 625 115 60 12 12 18 26 5

152 10 25 52 76 38 482 622 60 485 625 115 60 18 18 28 40 6

152 10 25 52 76 38 529 669 60 535 675 115 60 22 22 32 48 7

152 10 25 52 76 38 555 695 60 565 705 115 60 28 22 34 58 8

181 12 32 75 102 51 574 714 60 575 715 155 65 40 32 58 86 9

181 12 32 75 102 51 635 775 60 635 775 155 65 42 45 64 100 10

181 12 32 75 102 51 522 662 60 525 665 155 65 40 40 56 86 11

181 12 38 101 127 64 558 698 60 555 695 155 65 46 44 62 96 12

181 12 38 101 127 64 688 828 60 685 825 155 65 62 60 78 130 13

181 12 38 101 127 64 695 835 60 692 832 155 65 65 62 82 138 14

201 15 54 101 152 76 726 866 65 705 845 155 70 72 68 86 156 15

201 15 54 101 152 76 844 984 65 815 955 155 70 94 86 104 118 16

201 15 54 101 152 76 947 1087 65 930 1070 155 70 118 166 124 248 17

252 20 60 101 254 89 920 1060 90 895 1035 205 85 220 204 240 452 18

252 20 67 101 254 89 1045 1185 90 1015 1155 205 85 260 235 275 530 19

252 20 73 101 254 89 1200 1340 90 1175 1315 205 85 350 316 358 715 20

252 20 79 101 305 102 1350 1490 125 1285 1425 205 110 414 370 382 864 21

252 20 86 101 305 102 1675 1815 135 1605 1745 205 120 550 505 524 1138 22

Page 62


MODEL 'B'


O

W

D DIA

RODTAKEOUT

W

MODEL 'F'MODEL 'A'

MODEL 'E'

O

RODTAKEOUT

A

W

MODEL 'G'REQUIRED

X

N

ARODTAKEOUT

O

W A

LOADEDLENGTH

'Y'

P.C.D.

W

MODEL 'D'MODEL 'C'

A

SEE MODEL 'F' FOR

MODEL 'H'

OTHER DETAILS


MODEL 'K'


P

J

RODTAKEOUT

AA

O O

W

D DIAB

T

C

GT B

C

RODTAKEOUT

A

W

O

FLOAD FLANGE


FIG. QV4



Page 63


RODSIZE

OutsideDia.of

Casing


PlateThick-ness

BasePlate

Square

PCDBasePlate

BasePlateBolt

SpringHanger


LoadPlate

Square

LoadPlateThick-ness

SpaceBetweenBeams

X

CHANNELSECTION

900mm1800mm


MODEL MODEL

MODEL B & C

DIMENSIONS OF LUGS


MODEL D

LOADEDLENGTH Y

ROLLERDIMS.



MODEL FLOAD PLATE

ROD TAKE OUTCasing

Length A

SpringHanger

Size

0 M12 465 535 440 50 119 530 495 485 18 38 31 23 6 6 151 162 M16

1 M12 525 595 490 50 119 580 545 535 18 38 31 23 6 6 151 162 M16

2 M12 570 640 545 50 119 635 605 595 18 38 31 23 6 6 151 162 M16

3 M12 500 570 475 60 159 565 535 520 18 38 31 23 6 6 202 195 M20

4 M12 560 630 525 60 159 615 580 570 18 38 31 23 6 6 202 195 M20

5 M12 610 680 575 60 159 665 635 625 18 38 31 23 6 6 202 195 M20

6 M16 605 680 575 60 179 670 640 625 23 38 31 28 10 8 222 205 M20

7 M16 690 765 645 60 179 740 710 695 23 38 31 28 10 8 222 205 M20

8 M16 710 785 680 60 179 775 745 730 23 38 31 28 10 8 222 205 M20

9 M20 710 795 670 90 239 785 750 725 27 38 33 32 10 8 261 270 M20

10 M20 805 890 770 90 239 880 845 825 27 38 33 32 10 8 261 270 M20

11 M20 645 740 600 90 239 710 680 655 27 50 34 37 10 8 261 270 M20

12 M24 690 795 650 110 239 775 735 715 33 50 34 40 12 8 261 270 M20

13 M30 880 1010 845 110 239 975 930 905 39 76 50 47 12 8 261 270 M20

14 M30 890 1020 855 110 239 980 940 920 39 76 50 47 12 8 261 270 M20

15 M30 900 1035 860 110 249 990 960 930 39 76 50 50 12 10 261 270 M20

16 M36 1080 1215 1040 110 249 1175 1140 1105 45 76 65 61 20 10 261 270 M20

17 M42 1245 1390 1195 110 249 1335 1305 1265 52 86 75 68 20 10 261 270 M20

18 M48 1180 1330 1110 110 319 1230 1230 1160 60 105 75 74 20 12 352 398 M24

19 M56 1380 1550 1290 110 319 1395 1395 1330 69 115 85 80 20 12 352 398 M24

20 M64 1605 1775 1540 110 319 1660 1660 1590 74 115 100 87 25 12 352 398 M24

21 M72 1760 1930 1780 110 319 1910 1910 1825 85 115 100 91 25 15 352 398 M24

22 M80 2210 2400 2245 110 319 2395 1395 2285 94 128 100 100 25 15 352 398 M24

132 6 16 40 50 15 550 760 54 560 770 115 60 7 7 12 19 0

132 6 16 40 50 15 610 820 54 620 830 115 60 10 10 13 26 1

132 6 16 40 50 15 660 870 54 680 890 115 60 10 10 13 26 2

132 6 20 50 76 38 590 800 54 610 820 115 60 13 13 21 30 3

132 6 20 50 76 38 640 850 54 655 865 115 60 16 15 24 37 4

132 6 20 50 76 38 695 905 54 710 920 115 60 17 17 25 35 5

152 10 25 50 76 38 690 900 54 710 920 115 60 27 25 37 55 6

152 10 25 50 76 38 760 970 54 785 995 115 60 31 29 45 67 7

152 10 25 50 76 38 795 1005 54 820 1030 115 60 42 40 48 88 8

181 12 32 75 102 51 810 1020 54 830 1040 155 65 57 57 80 119 9

181 12 32 75 102 51 910 1120 54 920 1130 155 65 69 67 87 136 10

181 12 32 75 102 51 740 950 54 760 970 155 65 55 50 75 114 11

181 12 38 100 127 64 790 1000 54 805 1015 155 65 62 61 83 132 12

181 12 38 100 127 64 990 1200 54 1000 1210 155 65 85 83 107 179 13

181 12 38 100 127 64 1000 1210 54 1010 1220 155 65 90 88 115 197 14

201 15 54 100 152 76 1020 1230 70 1015 1225 155 70 103 99 118 205 15

201 15 54 100 152 76 1200 1410 70 1190 1400 155 70 136 132 149 315 16

201 15 54 100 152 76 1360 1570 70 1350 1560 155 70 170 155 174 344 17

252 20 60 100 254 89 1315 1525 84 1285 1495 205 85 302 287 336 618 18

252 20 67 100 254 89 1485 1695 84 1442 1652 205 85 370 336 385 738 19

252 20 73 100 254 89 1735 1945 84 1705 1915 205 85 501 465 510 1010 20

252 20 79 100 305 102 1935 2145 115 1885 2095 205 110 570 530 540 1180 21

252 20 86 100 305 102 2415 2625 131 2340 2550 205 120 775 769 755 1602 22

BS 3974Pipe Supports

Section 4

Section 3 of this catalogue has been compiled with the kind permission of theBritish Standard Institution. All data has been taken from BS 3974 Part 1 (1974),Part 2 (1978) and Part 3 (1980). Q.P.S. reserve the right to alter specifications inline with any updates by the relevant British Standards.

Schedule of materials

Material referenceComponent Material BS no. Designation

(a) Pipe clipsClips Range A Carbon steel 4360 Grade 43A

Range B 1501: Part 1 151 or 161: grade 430B

Range D1, D1(M), D2 Alloy steel 1501: Part 2 620 grade 27BRange D3, D3(M) 1501: Part 2 622 grade 515B

All bolts and Range A, B Carbon steel 4190 Grade 4, 6studbolts

Range D1, D1(M), D2 Alloy steel 4882 661 grade B16Range D3, D3(M) 4882 1% Cr Mo V boron grade B16A

All nuts Range A, B Carbon steel 4190 Grade 4

Range D1, D1(M), D2 Alloy steel 4882 240 grade 4Range D3, D3(M) 4882 621 grade 7

Distance-pieces All ranges Carbon steel 1387 Medium or heavy

(b) U-strapsStrap Range D1, D2 Alloy steel 1501: Part 2 620 grade 27B

Range D3 1501: Part 2 622 grade 515B

Steady plate Range D1, D2, D3 Alloy steel 1501: Part 2 620 grade 27A or 27B

Yoke, end and Ranges D1, D2, D3 Carbon steel 4360 Grade 43Ahanger plates

All bolts Ranges D1, D2, D3 Carbon steel 3692 Grade 8.8All nuts 3692 Grade 8

(c) Riser ClampsClamp Range A Carbon steel 4360 Grade 43A

Range B, C 1501: Part 1 151 or 161: grade 430BClamp Range D1, D2 Alloy steel 1501: Part 2 620 grade 27Band gusset Range D3 1501: Part 2 622 grade 515B

All bolts Range A, B Carbon steel 4190 Grade 4.6Range C 3692 Grade 8.8Range D1, D2 Alloy steel 4882 661 grade B16Range D3 4882 1% Cr Mo V boron grade 816A

All nuts Range A, B Carbon steel 4190 240 grade 4Range C 3692 Grade 8Range D1, D2 Alloy steel 4882 240 grade 4Range D3 4882 621 grade 7

Distance-pieces Range A, B Carbon steel 1387 Medium or heavyRange C Alloy steel 1775 HFS13 or HFW13Range D1, D2 Carbon steel 1387 Medium or heavyRange D3 Alloy steel 3604 620

(d) Sling rods All componentsRods All ranges Carbon steel 4360 Grade 43ANuts All ranges 4190 Grade 4 or 6

(e) Pipe overstraps Carbon steel 4360 Grade 43Aand bolts

Low temperature see table 12steel in section three

(f) Pipe overstraps Copper alloy 2870 CZ 110and hookstraps

Stainless steel 1449: Part 2 17% min. Cr content

(g) Lining Lead sheet 1178 —materials forsteel pipe clips Copper/copper 2870 CZ 110when used on alloy sheetcopper/copperalloy tubes Compressed fibre — —

BS 3974 PIPE SUPPORT

Page 64

BS3974 PIPE SUPPORT

2 Bolt Pipe Clamp

3 Bolt Pipe Clamp

4 Bolt Riser Clamp

6 Bolt Riser Clamp

10 Bolt Riser Clamp(Boiler Plate)

10 Bolt Riser Clamp(Alloy Steel)

U Bolt (Non Grip)

U Bolt (Grip)

Over Strap

Beam Welding Attachs

51L/51H

57L/57H/58L/58H/59

61

62

63

64/65/66

67/68

69/70

71

72

67

68/69

70

71

72

74/75

76

77

79

79

78

78

73

80

80

81

82

82

83

79

92

93

95

96

96/97/98

99

100

101

Dee Shackle

1 Piece Pipe Strap

U Strap

Spring Cage

Spring Cage

Sling Rod Cage

Hookbolt (To Grip)

Hookstrap

Universal Beam Clip


Page 65


INDEX


PageNo. PICTORIAL

51L51H

57L57H58L58H59

61

62

63

646566

6768

6970

71

72

79

92

93

95

96

97

98

99

100

101

2 BOLTPIPE CLAMP

3 BOLTPIPE CLAMP

4 BOLTRISERCLAMP

6 BOLTRISERCLAMP

10 BOLTRISERCLAMP

(Boiler Plate)

10 BOLTRISERCLAMP

(Alloy Steel)

‘U’ BOLTSNOT TO GRIP

‘U’ BOLTSTO GRIP

OVERSTRAP

BEAMWELDING

ATTACHMENT

DEESHACKLE

1 PIECEPIPE

STRAP

‘U’ STRAP

SPRINGCAGE

SPRINGCAGE

SLING RODCAGE

SLING RODCAGE

HOOKBOLT(To Grip)

HOOKSTRAP

UNIVERSALBEAM CLIP

67

68/69

70

71

72

74/75

76

77

79

79

78

78

73

80

80

81

81

82

82

83

Page 66


Page 67

FIG. 51 & 51H

Sling Clip Clip and load Safe Sling Clip SafeNom Outside Rod D dimensions G Working Rod D dimensions bolts G WorkingSize Dia Dia Dia B x T P Bolt Hole Ø Min load Dia Dia B x T P Bolt Hole dia Min Loadmm mm mm mm mm mm mm mm kgf mm mm mm mm mm mm kgf15 21.3 10 23 35x5 65 M10 12 15 28020 26.9 10 28 35x5 70 M10 12 15 28025 33.7 10 36 35x5 75 M10 12 15 28032 42.4 12 44 35x5 90 M12 15 18 28040 48.3 12 50 35x5 95 M12 15 18 28050 60.3 12 62 35x5 105 M12 15 18 28065 76.1 12 80 35x5 125 M12 15 18 165 16 80 35x8 155 M16 19 24 45080 88.9 12 92 35x5 135 M12 15 18 165 16 92 35x8 165 M16 19 24 450

100 114.3 12 118 35x5 170 M12 15 18 165 16 118 35x8 190 M16 19 24 450125 139.7 16 144 35x5 195 M16 19 24 280 16 144 35x8 215 M16 19 24 450150 168.3 16 172 35x5 225 M16 19 24 280 16 172 35x8 245 M16 19 24 450175 193.7 16 198 35x8 270 M16 19 24 450 16 198 45x10 280 M16 19 24 900200 219.1 16 224 35x8 295 M16 19 24 450 16 224 45x10 305 M16 19 24 900225 244.5 16 248 35x8 320 M16 19 24 450 20 248 60x10 340 M20 24 30 1350250 273.0 16 278 35x8 350 M16 19 24 450 20 278 60x10 365 M20 24 30 1350300 323.9 20 330 45x10 420 M20 24 30 900 24 330 55x15 455 M24 28 36 1800350 355.6 24 362 55x10 460 M24 28 36 900 30 362 55x15 500 M30 35 45 2250400 406.4 24 412 60x15 535 M24 28 36 1350 30 412 65x20 575 M30 35 45 2700450 457.0 30 464 65x20 625 M30 35 45 2250 36 464 80x20 635 M36 42 54 3600500 508.0 30 516 65x20 675 M30 35 45 2250 36 516 90x25 715 M36 42 54 4500550 559.0 30 566 65x20 725 M30 35 45 2250 36 566 90x25 765 M36 42 54 4500600 610.0 30 618 80x20 780 M30 35 45 2700 42 618 110x25 830 M42 48 63 5900

Pipe Size Light Series FIG 51L Heavy Series FIG 51H

USE HEAVY SERIES

boltsClip and load

Fig. 51 Dimensions of pipe clips for steel pipes (RANGE A:20ºC to 100ºC)

Pipe clip for steel, cast iron and copper/copper alloy pipes(range A: -20ºC to 100ºC

Sling G SafeRod Min Working

Nominal Outside Diameter D B x T P Bolt Hole LoadSize Diameter Diameter Size Diameter

kgf650 660 30 665 80x20 830 M30 35 45 1400700 711 30 716 80x20 880 M30 35 45 1300750 762 30 765 80x20 930 M30 35 45 1200800 813 30 816 90x25 1020 M30 35 45 2000850 864 30 868 90x25 1070 M30 35 45 1900900 914 30 918 90x25 1120 M30 35 45 1800

1000 1016 36 1020 100x30 1250 M36 42 54 2600

Pipe Clip Dimensions Clip & Load Bolts

FIG. 53 Dimensions of pipe clips for steel pipes(Range A: -20ºC to 100ºC)All dimensions are in millimetres


When ordering specify:Figure No.Nominal pipe sizeFinish


Page 68

Sling Clip Safe Sling Clip SafeNom Outside Rod D Dimensions Bolts G Working Rod D Dimensions Bolts G WorkingSize Dia Dia Dia B x T P Q Bolt Hole Ø Min Load Dia Dia B x T P Q Bolt Hole Ø Min Loadmm mm mm mm mm mm mm mm mm kgf mm mm mm mm mm mm mm kgf15 21.3 10 23 35x5 65 70 M10 12 15 28020 26.9 10 28 35x5 70 70 M10 12 15 28025 33.7 10 36 35x5 75 70 M10 12 15 28032 42.4 12 44 35x5 90 70 M12 15 18 28040 48.3 12 50 35x5 95 85 M12 15 18 28050 60.3 12 62 35x5 105 80 M12 15 18 28065 76.1 12 80 35x5 125 105 M12 15 18 165 16 80 35x8 155 90 M16 19 24 45080 88.9 12 92 35x5 135 105 M12 15 18 165 16 92 35x8 165 95 M16 19 24 450

100 114.3 12 118 35x5 170 105 M12 15 18 165 16 118 35x8 190 95 M16 19 24 450125 139.7 16 144 35x8 215 95 M16 19 24 280 16 144 35x8 215 95 M16 19 24 450150 168.3 16 172 35x8 245 95 M16 19 24 280 16 172 35x8 245 95 M16 19 24 450175 193.7 16 198 35x8 270 95 M16 19 24 280 20 198 45x10 288 85 M20 24 30 900200 219.1 16 224 35x8 295 100 M16 19 24 280 20 224 45x10 315 95 M20 24 30 900225 244.5 16 248 45x10 330 95 M16 19 24 450 20 248 55x15 365 85 M20 24 30 1350250 273.0 16 278 45x10 360 105 M16 19 24 450 20 278 55x15 390 90 M20 24 30 1350300 323.9 20 330 55x15 445 115 M20 24 30 900 24 330 65x20 475 115 M24 28 36 1800350 355.6 24 362 55x15 485 115 M24 28 36 900 30 362 65x20 525 115 M30 35 45 2250400 406.4 24 412 65x20 560 115 M24 28 36 1350 30 412 90x25 600 115 M30 35 45 2700450 457.0 30 464 65x20 625 115 M30 35 45 1800 36 464 90x25 660 115 M36 42 54 3600500 508.0 30 516 90x25 700 115 M30 35 45 2700 36 516 100x30 740 115 M36 42 54 4500550 559.0 30 566 90x25 750 15 M30 35 45 2700 36 566 100x30 790 115 M36 42 54 4500600 610.0 30 618 90x25 805 115 M30 35 45 2700 42 618 100x35 880 115 M42 48 63 5900

USE HEAVY SERIES

Pipe Size Light Series Heavy SeriesClip and load Clip and load

FIG. 57 Dimensions of pipe clips for steel pipes, Range B: -20ºC to 400ºC



FIGS. 57/58/59


Page 69

Sling Clip Safe Sling Clip SafeNom Outside Rod D Dimensions Bolts G Working Rod D Dimensions Bolts G WorkingSize Dia Dia Dia B x T P Q Bolt Hole Ø Min Load Dia Dia B x T P Q Bolt Hole Ø Min Loadmm mm mm mm mm mm mm mm mm kgf mm mm mm mm mm mm mm kgf15 21.3 10 23 35x5 65 70 M10 12 15 28020 26.9 10 28 35x5 70 70 M10 12 15 28025 33.7 10 36 35x5 75 70 M10 12 15 90 10 36 35x8 95 60 M10 12 15 28032 42.4 12 44 35x5 90 70 M12 15 15 90 12 44 35x8 110 60 M12 15 18 28040 48.3 12 50 35x5 95 85 M12 15 15 90 12 50 35x8 115 75 M12 15 18 28050 60.3 12 62 35x5 105 80 M12 15 15 90 12 62 35x8 125 70 M12 15 18 28065 76.1 12 80 35x8 145 95 M12 15 18 165 16 80 35x8 155 90 M16 19 24 45080 88.9 12 92 35x8 155 95 M12 15 18 165 16 92 35x8 165 95 M16 19 24 450

100 114.3 12 118 35x8 190 95 M12 15 18 165 16 118 45x10 200 90 M16 19 24 450125 139.7 16 144 45x10 225 90 M16 19 24 280 16 144 45x10 225 90 M16 19 24 450150 168.3 16 172 45x10 255 90 M16 19 24 280 16 172 45x10 255 90 M16 19 24 450175 193.7 16 198 45x10 280 90 M16 19 24 280 20 198 55x15 315 75 M20 24 30 900200 219.1 16 224 45x10 305 100 M16 19 24 280 20 224 55x15 340 80 M20 24 30 900225 244.5 16 248 55x15 350 85 M16 19 24 450 20 248 65x20 390 70 M20 24 30 1350250 273.0 16 278 55x15 385 95 M16 19 24 450 20 278 65x20 415 80 M20 24 30 1350300 323.9 20 330 65x20 470 115 M20 24 30 900 24 330 90x25 505 115 M24 28 36 1800350 355.6 24 362 65x20 510 115 M24 28 36 900 30 362 110x25 550 115 M30 35 45 2250400 406.4 24 412 90x25 585 115 M24 28 36 1350 30 412 120x30 625 115 M30 35 45 2700450 457.0 30 464 110x25 650 115 M30 35 45 1800 36 464 120x35 710 115 M36 42 54 3600500 508.0 30 516 120x30 725 115 M30 35 45 2250 36 516 110x45 815 115 M36 42 54 4500550 559.0 30 566 120x30 775 115 M30 35 45 2250 36 566 110x45 865 115 M36 42 54 4500600 610.0 30 618 120x35 855 115 M30 35 45 2700 42 618 130x50 955 115 M42 48 63 5900

Heavy SeriesClip and load Clip and load

Pipe Size Light Series

USE HEAVY SERIES

Clip and load bolts GNominal Outside Sling D P Q Bolt Bolt Min

Size Dia Rod Diameter Size HoleDiameter Dia

D1 D2&D3 D1 and D2 D3

15 21.3 12 23 40x6 55x6 85 65 M12 15 18 450 37520 26.9 12 28 40x6 55x6 90 65 M12 15 18 450 37525 33.7 12 36 40x6 55x6 105 65 M12 15 18 450 37532 42.4 12 44 40x6 55x6 105 65 M12 15 18 450 37540 48.3 16 50 50x10 60x10 115 75 M16 19 24 900 75050 60.3 16 62 50x10 60x10 130 75 M16 19 24 900 75065 76.1 16 80 50x10 60x10 155 75 M16 19 24 900 75080 88.9 16 92 50x10 60x10 165 100 M16 19 24 900 750

100 114.3 16 118 60x10 70x12 195 100 M16 19 24 900 750125 139.7 20 144 70x12 80x12 235 100 M20 24 30 1350 1130150 168.3 24 172 70x12 80x15 275 100 M24 28 36 1800 1500175 193.7 24 198 80x12 100x20 325 100 M24 28 36 1800 1500200 219.1 24 224 80x12 100x20 360 100 M24 28 36 1800 1500225 244.5 24 248 110x12 100x20 385 100 M24 28 36 1800 1500250 273.0 24 276 110x12 100x25 435 100 M24 28 36 1800 1500300 323.9 30 330 100x20 120x25 500 115 M30 35 45 2700 2260

30 362 100x20 120x25 585 115 M30 35 45 2700 226042 362 140x25 100x40 585 115 M42 48 63 5900 495030 412 110x20 140x25 625 115 M30 35 45 2700 226042 412 140x25 130x40 625 115 M42 48 63 5900 495030 464 100x25 140x30 690 115 M30 35 45 3600 302042 464 120x30 140x40 690 115 M42 48 63 5900 495030 516 120x25 160x30 745 115 M30 35 45 3600 302042 516 130x30 160x40 745 115 M42 48 63 5900 495030 566 130x25 180x30 800 115 M30 35 45 3600 302042 566 150x30 160x40 800 115 M42 48 63 5900 495030 618 140x25 200x30 845 115 M30 35 45 3600 302042 618 160x30 200x40 845 115 M42 48 63 5900 4950

Safe WorkingLoad

450

500

Clip Dimensions*

Sub RangesB x T

Pipe

550

600

355.6

406.4

457.0

508.0

559.0

610.0

350

400

FIG. 59Dimensions of alloy steel pipe clips forsteel pipes.(range D: 20ºC to 570ºC)All dimensions are in millimetres


*Range D1 gives dimensions for pipe clips using BS1501 : 620 grade 27B (1% Cr , ½% Mo) material for use formaximum temperature of 510ºC.Ranges D2 and D3 give respectively , dimensions for pipe clips using BS 1501 : 620 grade 27B (1% Cr , ½% Mo)material for use for maximum temperature of 540ºC and BS 1501 : 622 grade 31B ( 2¼% Cr , 1 % Mo) Material for useup to 570ºC

FIG. 58 Dimensions of pipe clips for steel pipes, Range C:400ºC to 470ºC


Page 70

Sling W x T A B CNominal Outside Rod SizeSize Diameter Diameter Nominal Length Diameter

Size J K L K L100 114.3 12 90x10 118 210 40 25 25 M12 M12 14 14125 139.7 12 100x10 144 235 40 25 25 M12 M12 14 14150 168.3 20 100x15 172 290 40 25 25 M20 M20 22 22175 193.7 20 100x15 198 315 40 25 25 M20 M24 22 26200 219.1 20 100x15 224 340 40 25 25 M20 M24 22 26225 244.5 20 120x15 248 375 50 32 31 M20 M24 22 26250 273.0 20 120x15 278 410 50 32 31 M20 M24 22 26300 323.9 24 120x20 330 480 50 32 31 M24 M24 26 26

BoltHole

Pipe TubularDistance Piece

Bolt

Pipe Min Max Increment over min. HNominal H load atSize min, H

Maximum Load in (Kg)kg

100 360 800 760 720 680 640 600 560 520 480 440 400125 390 810 765 730 695 665 630 595 565 525 495 460150 445 1060 1045 1030 990 940 900 860 820 780 740 715175 465 1050 1005 965 920 885 845 810 775 735 695 665200 490 1000 940 900 865 830 795 760 725 690 650 615225 540 1400 1355 1305 1260 1210 1160 1115 1070 1020 975 925250 585 1200 1155 1105 1055 1010 960 910 865 815 765 725300 655 1700 1650 1600 1550 1500 1450 1400 1350 1300 1250 1200

20 40 60 80 180 200100 120 140 160

FIG. 61

FIG. 61 Dimensions of riser clamps for pipes up to and including 300mmnominal size (Ranges A and B)*

FIG. 61 Maximum loads for riser clamps

When ordering specify:Figure No.RangeNominal pipe sizeFinish

*Range A: -20ºC to 100ºCRange B: -20ºC to 400ºC


Page 71

Pipe Sling W X T A B C Tubular Bolt Bolt BoltNominal Outside Rod Distance Piece Size Hole HoleSize Diameter Diameter Nominal Length Diameter Centres

SizeP J K L K L G

250 356.6 24 150*20 362 510 50 32 35 M24 M24 26 26 76400 406.4 24 150*20 412 575 50 32 35 M24 M24 26 26 75450 457 30 150*25 454 650 50 32 35 M30 M24 32 26 75500 508 30 180*25 516 705 50 32 35 M30 M24 32 26 100550 559 30 180*25 586 795 50 32 35 M30 M24 32 26 100600 610 30 200*25 616 805 50 32 41 M30 M30 32 32 100

FIG. 62

FIG. 62 Dimensions of riser clamps for pipes over 300mm nominal size (ranges A and B)*

*Range A: -20ºC to 100ºCRange B: -20ºC to 400ºC

Pipe Min Max Increment ov er Min HNominal H Load 20 40 60 80 100 120 140 160 180 200 220 240Size Kg Max imum loads in (Kg)

250 660 2225 2180 2132 2080 2030 1972 1920 1870 1820 1760 1710 1660 1600400 756 2000 1950 1900 1840 1780 1725 1670 1615 1570 1500 1440 1390 1320450 825 2700 2660 2610 2560 2510 2460 2405 2380 2310 2280 2210 2160 2100500 910 3000 2960 2915 2860 2615 2780 2715 2660 2615 2560 2515 2460 2400550 935 2800 2760 2710 2660 2610 2580 2516 2480 2415 2380 2210 2280 2200600 985 3200 3160 3115 3060 3010 2860 2910 2880 2815 2760 2710 2660 2600

FIG. 62 Maximum loads for riser clamps


Page 72

Pipe Sling Riser Clamp Tubular Bolt Bolt Gusset Plate SafeNominalOutside Rod W X T A B C D F G H Distance Piece Size Hole O R S U V WorkingSize DiameterDiameter Nominal Length Diameter Load

SizeP J K L K L Kg

200 219.1 20 130 X 25 224 458 50 200 42 85 1085 20 35 M20 M16 22 18 50 483 119 57 38.1 2268225 244.5 20 130 X 25 248 508 50 175 42 65 1065 20 35 M20 M16 22 18 63 483 132 57 38.1 2268250 273 20 155 X 25 278 508 50 250 42 75 1220 20 35 M20 M16 22 18 63 559 146 57 38.1 2268300 323.9 30 205 X 25 330 560 70 226 50 100 1220 25 53 M30 M20 33 22 75 559 171 57 38.1 3628

30 205 X 25 362 610 70 200 50 105 1220 25 53 M30 M20 33 22 89 559 187 57 38.1 362836 230 X 38 362 610 80 280 60 115 1370 32 58 M36 M24 39 26 89 635 200 95 50.8 725730 230 X 25 412 660 70 225 50 115 1370 25 53 M30 M20 33 22 100 635 213 57 38.1 362836 230 X 38 412 660 80 225 60 115 1370 32 58 M36 M24 39 26 100 635 213 95 50.8 725730 230 X 38 464 710 70 225 50 100 1370 32 53 M36 M24 33 26 114 635 241 95 50.8 453636 255 X 38 464 710 80 225 60 130 1370 32 58 M36 M24 39 26 114 635 241 95 50.8 725730 205 X 38 516 762 70 280 50 100 1525 32 53 M30 M24 33 26 127 711 267 95 50.8 453636 255 X 38 516 762 80 280 60 130 1525 32 58 M36 M24 39 26 127 711 267 95 50.8 725730 205 X 38 566 812 70 255 50 100 1525 32 53 M30 M24 33 26 140 711 292 95 50.8 453636 280 X 38 566 812 80 255 60 156 1525 32 58 M36 M24 39 26 140 711 292 95 50.8 725730 205 X 38 618 864 70 225 50 100 1525 32 53 M30 M24 33 26 152 711 317 95 50.8 4536

280 X 38 618 864 80 225 60 155 1525 32 58 M36 M24 39 26 152 711 317 95 50.8 7257

350 356.6

400 406.4

450 457

550 508

550 559

600 610

FIG. 63 Dimensions of riser clamps for pipes up to and including 600mm nominal size (Range C: Over 400ºC to 470ºC)


FIG. 63


Page 73

Pipe Sling U-Plate Yoke Safe WorkingNominal Outside Rod Sub-Ranges Hanger Plate End Plate LoadSize Diameter Diameter D1 D2&D3 A B C D E F G H K L x M x T2 D1 and D3

W x T1 W x T1 D2kg kg

200 219.1 24 80x12 100x20 112 470 224 184 40 30 36 50 26 152x152x15 1800 1500225 244.5 24 110x12 100x20 124 480 248 196 40 30 36 50 26 152x152x15 1800 1500250 273 24 110x12 100x25 138 490 276 210 40 30 36 50 26 152x152x15 1800 1500300 323.9 30 100x20 120x25 165 515 330 237 40 35 45 65 33 152x152x15 2700 2260

30 100x20 120x25 181 530 362 253 40 35 45 65 33 152x152x15 2700 226042 140x25 100x40 181 530 362 253 40 50 63 90 45 152x152x20 5900 495030 110x20 140x25 206 560 412 278 50 35 45 65 33 152x152x15 2700 226042 140x25 130x40 206 560 412 278 50 50 63 90 45 152x152x20 5900 495030 100x25 140x30 232 635 464 304 40 35 45 65 33 152x152x20 3600 302042 120x30 140x40 232 635 464 304 40 50 63 90 45 152x152x20 5900 495030 120x25 160x30 258 660 516 330 60 35 45 65 33 154x161x20 3600 302042 130x30 160x40 258 660 516 330 60 50 63 90 45 154x161x20 5900 495030 130x25 180x30 283 685 566 355 70 35 45 65 33 154x161x20 3600 302042 150x30 160x40 283 685 566 355 70 50 63 90 45 154x161x20 5900 495030 140x25 200x30 309 710 618 381 75 35 45 65 33 154x161x20 3600 302042 160x30 200x40 309 710 618 381 75 50 63 90 45 154x161x20 5900 4950

500

450

400

350

559

610600

550

355.6

406.4

457

508

FIG.93 Dimensions of alloy steel U-Straps for steel pipes (Range D:-20ºC to 570ºC)All dimensions are in millimetres.

Material - Carbon SteelWhen ordering specify:Figure No.Nominal Pipe SizeFinish

NOTE 1. This support is suitable only for nominally horizontal sections of pipe lines. When using this type of support consider ation shall be given toproblems related to possible in-service damage to the pipe thermal insulation in the vicinity of the support.NOTE 2. Range D1 gives dimensions for pipe clips using BS 1501: 620 grade 27B (1% Cr , ½% Mo) material for use for maximum temperature of 510ºC.

Ranges D2 and D3 give respectively , dimensions for pipe clips using BS 1501 : 620 grade 27B (1% Cr , ½% Mo) material for use for maximumtemperature of 540ºC and BS 1501: 622 grade 31B (2¼ % Cr , 1% Mo) material for use up to 570ºC.

NOTE 3. Asbestos free tape or millboard may be placed between the pipe and the U-Strap. In such cases, the dimensions of the U- Strap shall beadjusted to ensure that it does not tighten on to the pipe.

FIG. 93


Page 74

Pipe Sling Clamp Load Bolt Clamp Bolt Gusset Plate SafeNominal Outside Rod W x T A B*Min Bolt Bolt D E F Bolt Bolt H J K L M N WorkingSize Diameter Diameter Size Hole Size Hole Load

C Diameter G Diameterkg

200 219.1 24 130x20 225 65 M24 26 36 36 1065 M16 18 458 205 65 50 485 40 2270225 244.5 24 130x20 250 65 M24 26 36 36 1065 M16 18 508 180 65 60 485 40 2270250 273.0 24 155x20 279 65 M24 26 36 36 1220 M16 18 508 255 80 60 560 40 2270300 323.9 30 155x25 330 65 M30 33 45 45 1220 M20 22 560 230 80 75 560 40 3630

30 155x25 362 65 M30 33 45 45 1220 M20 22 610 205 80 85 560 40 363042 205x35 362 65 M42 45 63 63 1370 M24 26 610 280 105 85 635 50 726030 155x25 413 65 M30 33 45 45 1370 M20 22 660 255 80 100 635 40 363042 205x35 413 65 M42 45 63 63 1370 M24 26 660 255 105 100 635 50 726036 155x35 470 65 M36 39 54 54 1370 M24 26 710 230 80 110 635 50 454042 205x35 470 65 M42 45 63 63 1370 M24 26 710 230 105 110 635 50 726036 180x35 521 65 M36 39 54 54 1525 M24 26 762 280 90 125 710 50 454042 230x35 521 65 M42 45 63 63 1525 M24 26 762 280 115 125 710 50 726036 180x35 572 65 M36 39 54 54 1525 M24 26 812 255 90 140 710 50 454042 230x35 572 65 M42 45 63 63 1525 M24 26 812 255 115 140 710 50 726036 180x35 622 65 M36 39 54 54 1525 M24 26 864 230 90 150 710 50 454042 255x35 622 65 M42 45 63 63 1525 M24 26 864 230 130 150 710 50 7260

550 559.0

600 610.0

450 457.0

500 508.0

350 355.6

400 406.4

FIG. 64 Dimensions of riser clamps for steel pipes (Range D1: -20ºC to 510ºC)All dimensions are in millimetres

FIG. 64,65,66



Page 75

Pipe Sling Clamp Load Bolt Clamp Bolt Gusset Plate SafeNominal Outside rod W x T A B*Min Bolt Bolt D E F Bolt Bolt H J K L M N working

Size Diameter Diameter Size hole size hole loadC diameter G diameter

kg200 219.1 24 155x25 225 65 M24 26 36 36 1065 M20 22 458 205 80 50 485 40 2270225 244.5 24 155x25 250 65 M24 26 36 36 1065 M20 22 508 180 80 60 485 40 2270250 273.0 24 155x25 279 65 M24 26 36 36 1220 M20 22 508 255 80 60 560 40 2270300 323.9 30 180x35 330 65 M30 33 45 45 1220 M24 26 560 230 90 75 560 40 3630


350 355.6

400 406.4

450 457.0

500 508.0

550 559.0

600 610.0

FIG. 65 Dimensions of riser clamps for steel pipes (Range D2: 510ºC to 540ºC)All dimensions are in millimetres

Pipe Sling Clamp Load Bolt Clamp Bolt Gusset Plate SafeNominal Outside rod W x T A B*Min Bolt Bolt D E F Bolt Bolt H J K L M N working

Size Diameter Diameter Size hole size hole loadC diameter G diameter

kg200 219.1 24 155x25 225 65 M24 26 36 36 1065 M20 22 458 205 80 50 485 40 1900225 244.5 24 155x25 250 65 M24 26 36 36 1065 M20 22 508 180 80 60 485 40 1900250 273.0 24 155x25 279 65 M24 26 36 36 1220 M20 22 508 255 80 60 555 40 1900300 323.9 30 180x35 330 65 M30 33 45 45 1220 M20 22 560 230 90 75 555 40 3050


350 355.6

400 406.4

450 457.0

500 508.0

550 559.0

600 610.0

FIG. 66 Dimensions of riser clamps for steel pipes (Range D2: 540ºC to 570ºC)All dimensions are in millimetres



Page 76

Nom pipe Pipe A N M K SSize o.d. dia max.15 21.3 8 40 45 25 1020 26.9 8 45 55 30 1025 33.7 8 50 60 30 1032 42.4 8 60 70 30 1040 48.3 10 65 85 40 1650 60.3 10 80 100 40 1665 76.1 12 95 120 50 1980 88.9 16 110 140 55 19

100 114.3 16 140 165 55 19125 139.7 16 165 190 55 19150 138.3 20 195 225 65 19175 193.7 20 220 250 65 19200 219.1 20 250 275 65 19225 244.5 20 275 300 65 19250 273.0 20 305 335 75 22300 323.9 20 355 385 75 22350 355.6 24 390 425 80 22400 406.4 24 440 475 80 22450 457.0 24 495 525 80 22500 508.0 24 545 575 80 22550 559.0 24 595 625 80 22600 610.0 24 645 675 80 22

80 98 16 120 150 55 19*100 118 16 140 165 55 19*150 170 20 195 225 65 19*200 222 20 250 275 65 19*250 274 20 305 335 75 22*300 326 20 355 385 75 22350 378 24 410 450 80 22400 429 24 465 500 80 22450 480 24 520 550 80 22500 532 24 570 600 80 22600 635 24 670 700 80 22

FIG. 68 Cast Iron Pipes

Dimensions of U-Bolts (not to grip pipe)All dimensions are in millimetres

FIG. 67/68

Material - Carbon SteelWhen ordering specify:Figure No.Nominal pipe sizeFinish

*These U-bolts are identical with the equivalent sizes for steel pipe.

FIG. 67 Steel Pipes


Page 77

Nom pipe Pipe A N M K SSize O/D Dia Max15 21.3 8 30 50 25 720 26.9 8 35 60 25 1025 33.7 8 45 65 25 1032 42.4 8 55 75 25 1040 48.3 10 60 90 35 1650 60.3 10 75 100 35 1665 76.1 12 90 130 45 1980 88.9 16 105 150 50 19

100 114.3 16 135 175 50 19125 139.7 16 160 200 50 19150 168.3 20 190 235 55 19175 193.7 20 215 260 55 19200 219.1 20 245 295 55 19225 244.5 20 270 310 55 22250 273.0 20 300 350 60 22300 323.9 20 350 400 60 22350 355.6 24 385 440 65 22400 406.4 24 435 500 65 22450 457.0 24 485 540 70 22500 508.0 24 540 600 70 22550 559.0 24 590 650 70 22600 610.0 24 640 700 70 22

80 98 16 115 160 50 19*100 118 16 135 175 50 19*150 170 20 190 235 55 19*200 222 20 245 295 55 19*250 274 20 300 350 60 22*300 326 20 350 400 60 22350 378 24 405 460 65 22400 429 24 455 520 65 22450 482 24 505 560 70 22500 532 24 560 620 70 22600 635 24 660 720 70 22

Dimensions of U-Bolts (to grip pipe)All dimensions are in millimetres

FIG. 69 Steel Pipes

FIG. 70 Cast Iron Pipes

*These U-bolts are identical with the equivalent sizes for steel pipe.

FIG. 69/70

Material - Carbon Steel.When ordering specify:Figure NoNominal Pipe SizeFinish


Page 78

Associated Safe d D W S e P Q nSling Rod Working

Dia Loadkg

8 230 6.3 10 9.5 22 19 25 45 M610 36012 53016 1010 12.7 16 22 48 32 51 97 M1220 1580 16 20 25 57 38 60 120 M1624 2280 19 24 32 70 44 73 133 M2030 3650 25 30 38 92 57 91 180 M2436 5340 32 36 48 114 70 115 225 M3042 7400 38 42 60 140 89 139 271 M36

25 38 76 M109.5 12 16 35

NOTE: The safe working load specified is based upon the safe working load ofassociated sling rods. The actual safe working loads for shackles complyingwith BS 3032 are higher than those given in the table.

FIG. 79 Dimensions of Dee shackles

Material - Carbon SteelWhen ordering specify:Figure No.Sling rod diameterFinish

FIG. 79

Nominal Sling Load Safe Pipe Pipe Rod C or A R B T G H Bolt Load WorkingSize O/D Dia Hole Bolt Loadmm mm mm mm mm mm mm mm mm mm mm kgf15 21.3 8 See 12 20 3 17 70 11 M8 7020 26.9 8 Fig 80 14 20 3 17 75 11 M8 7025 33.7 8 82 & 17 20 3 17 75 11 M8 7032 42.4 8 83 22 20 3 17 80 11 M8 70

FIG. 92 One piece strap, Range A: -20ºC to 100ºC

FIG. 92 Dimensions of one piece strap (with screwed machined,forged and hot formed eye) for uninsualted steel pipe.

Material - Carbon SteelWhen ordering specify:Figure No.Nominal pipe sizeFinish


Page 79

FIG. 71 OVERSTRAP

Nom SteelPipe Pipe Size Hole BoltSize O/D A B WxT C R E Dia15 21.3 53 91 35x5 10 11.5 12 1020 26.9 55 93 35x5 13 14 12 1025 33.7 57 95 35x5 16 18 12 1032 42.4 64 102 35x8 20 22 15 1240 48.3 79 117 35x8 23 25 15 1250 60.3 81 119 35x8 29 31 15 1265 76.1 89 127 45x10 36 40 19 1680 88.9 99 137 45x10 43 46 19 16

100 114.3 108 146 45x10 55 59 19 16125 139.7 119 160 60x10 68 72 24 20150 168.3 136 174 60x10 82 86 24 20175 193.7 155 195 55x15 95 99 24 20200 219.1 170 210 55x15 107 112 24 20

Sling Material Hole Bolt or SafeRod size A C D Dia rod WorkingDia BxT E Dia Load (kg)8 50x6 75 40 50 14 12 230

10 50x6 75 40 50 14 12 36012 50x6 75 40 50 18 16 55016 75x10 85 60 55 22 20 101020 75x12 85 70 55 27 24 158024 100x12 115 75 80 33 30 2280

1. Beam welding attachmentsTwo types of beam welding attachments are specified:Type 1: Inverted U-shape attachmentType 2: U shaped attachment

2. Interchangeability. These attachments are interchangeable ifsupplied with all three holes drilled, as given in table 2.

FIG. 72 BEAM WELDING ATTACHMENT

All dimensions in millimetres


Page 80

FIG. 95

Sling Hole Size Bolt Bolt C E SafeRod Dia of Angle Size Hole workingDia F D Dia load

45 to 65 100 140 T1 T2 (kg)8 80 - - 6 8 12 Ax30x5 M8 9 10 20 230

10 80 - - 6 - 16 Ax40x6 M10 11 15 25 36012 80 100 130 8 10 18 Ax50x8 M12 14 20 30 53016 80 100 130 10 10 22 Ax65x8 M16 18 30 35 101020 80 100 130 10 12 30 Ax75x8 M20 22 35 40 158024 90 100 130 12 15 33 Ax100x12 M24 26 45 55 228030 90 100 130 15 20 43 Ax100x12 M30 33 45 55 365036 - 100 130 20 25 48 Ax125x12 M36 39 60 65 534042 - 100 130 25 35 56 Ax150x15 M42 45 75 75 7400

Width W for flat Tand cleats

Spring Inside Dia

ThicknessOf flats

NOTE 1. B is the ‘width of section’ given in BS 4 : Part 1NOTE 2. X = T + D where T is the ‘flange thickness’ given in BS 4 : Part 1

2


When ordering specify:Figure No.SizeBeam flange width BBeam flange thickness XRod dia DDepth of cage

FIG. 95 Dimensions of spring cage, type U: universal beam

FIG. 96

Sling T3 Hole Bolt Bolt Tubular SafeRod Dia Size Hole distance L M X Z WorkingDia F D Dia piece. Load

45 to 65 100 140 45 to 65 100 140 Nom.Size (kg)8 80 - - 6 8 8 12 M8 9 8 15 20 8 10 230

10 80 - - 6 10 8 16 M10 11 10 20 20 9 10 36012 80 100 130 8 10 10 18 M12 14 15 20 25 10 10 53016 80 100 130 10 10 10 22 M16 18 20 20 30 12 10 101020 80 100 130 10 12 15 30 M20 22 20 25 30 14 12 158024 90 100 130 12 12 15 33 M24 26 25 25 40 18 12 228030 90 100 130 15 15 20 43 M30 33 32 25 50 20 12 365036 - 100 130 20 - 25 48 M36 39 40 30 65 24 12 534042 - 100 130 25 - 25 56 M42 45 50 20 75 28 14 7400

15202535

-101012

Spring Inside Dia Spring Inside Dia

Cleat

-

Width W for flat T Thickness of flatsand cleats T1 and T2

FIG. 96 Dimensions of spring cage, type R: rolled steel joist




Page 81

FIG. 97

Sling Width Size Hole Bolt Bolt SafeRod for flat of angle diameter Size hole workingDia T1 F D Dia load

T1 T2 C E H Y (kg)8 35 8 8 Ax30x5 10 20 165 50 12 M8 9 230

10 35 8 8 Ax40x6 15 25 170 50 16 M10 11 36012 45 8 8 Ax50x8 20 30 170 55 18 M12 14 53016 45 10 10 Ax65x8 30 35 180 70 22 M16 18 101020 60 15 10 Ax75x8 35 40 200 90 30 M20 22 158024 80 15 10 Ax100x12 45 55 210 95 33 M24 26 228030 90 15 15 Ax100x12 45 55 240 115 43 M30 33 365036 100 20 20 Ax125x12 60 65 275 140 48 M36 39 534042 130 25 25 Ax150x15 75 75 305 165 56 M42 45 7400

Thicknessof flats

Dimensions

NOTE 1. B is the ‘width of section’ given in BS 4 : Part 1NOTE 2. X = T + D where T is the ‘flange thickness’ given in BS 4 : Part 1

2



FIG. 97 Dimensions of sling rod cage, type U: universal beam

FIG. 98

Sling Width H Y Hole Bolt Bolt Tubular SafeRod for flat Dia Size Hole distance WorkingDia T1 and F D Dia piece Load

cleat T1 T2 T3 Nominal Size L M X Z (kg)8 35 8 8 8 165 50 12 M8 9 8 15 20 8 10 230

10 35 8 8 8 170 50 16 M10 11 10 20 20 9 10 36012 45 8 8 8 170 55 18 M12 14 15 20 25 10 10 53016 45 10 10 10 180 70 22 M16 18 20 20 30 12 10 101020 60 15 10 15 200 90 30 M20 22 20 25 30 14 12 158024 80 15 10 15 210 95 33 M24 26 25 25 40 18 12 228030 90 15 15 15 240 115 43 M30 33 32 25 50 20 12 365036 100 20 20 20 275 140 48 M36 39 40 30 65 24 12 534042 130 25 25 25 305 165 56 M42 45 50 30 75 28 14 7400

CleatThicknessof flats

FIG. 98 Dimensions of sling rod cage, type R: rolled steel joist




Page 82

HOOK BOLT (TO GRIP)

FIG. 99

Nom Pipe Pipe A N M K SSize O/D Dia max80 98 16 115 160 50 19

*100 116 16 135 175 50 19*150 170 20 190 235 55 19*200 222 20 245 295 55 19*250 274 20 300 350 60 22*300 326 20 350 400 60 22350 378 24 405 460 65 22400 429 24 455 520 65 22450 480 24 505 560 70 22500 532 24 560 620 70 22600 635 24 660 720 70 22

Nom Pipe Pipe A N M K SSize O/D Dia max15 21.3 8 30 50 25 720 26.9 8 35 60 25 1025 33.7 8 45 65 25 1032 42.4 8 55 75 25 1040 48.3 10 60 90 35 1650 60.3 10 75 100 35 1665 76.1 12 90 130 45 1980 88.9 16 105 150 50 19

100 114.3 16 135 175 50 19125 139.7 16 160 200 50 19150 168.3 20 190 235 55 19175 193.7 20 215 260 55 19200 219.1 20 245 295 55 19225 244.5 20 270 310 55 19250 273.0 20 300 350 60 22300 323.9 20 350 400 60 22350 355.6 24 385 440 65 22400 406.4 24 435 500 65 22450 457.0 24 485 540 70 22500 508.0 24 540 600 70 22550 559.0 24 590 650 70 22600 610.0 24 640 700 70 22

HOOK BOLT (TO GRIP)Fig. 99 Steel pipes 15 - 600nom pipe size

Fig. 99 Cast iron pipes 80 - 600 nom pipe size


Material - Carbon SteelComplete with 2 Nuts

A B Strap C R Hole Boltsize diameter Size

Copper/ WxT Ecopper Steelalloy10 10 13 20 12x1.6 4.5 5.5 3.6 M312 12 19 30 12x2.5 5.5 6.5 5.8 M515 15 19 30 12x2.5 7 8 5.8 M516 16 21 30 15x2.5 7.5 8.5 7 M618 18 23 35 15x2.5 8.5 9.5 7 M620 20 23 35 15x2.5 9.5 10.5 7 M622 22 26 40 20x2.5 10.5 11.5 10 M825 25 28 40 20x2.5 12 13 10 M828 28 30 45 20x3 13.5 14.5 10 M830 30 30 45 20x3 14.5 15.5 10 M835 35 40 55 25x4 17 18 12 M1038 38 40 55 25x4 18.5 19.5 12 M1042 42 43 60 25x4 20.5 21.5 12 M10

44.5 - 43 60 25x4 22 23 12 M10- 50 46 60 25x4 24 26 12 M10

54 - 50 70 30x4 26.5 28 15 M1257 - 52 70 30x4 28 30 15 M1257 - 55 70 30x4 33 34 15 M12

Tube OutsideDiameter

HOOKSTRAP

FIG. 100

Copper/copper alloy tube 10-67 O/DSteel tube 10-50 nom. bore

*These U-Bolts are identical with the equivalent sizesfor steel pipe.

Material - Carbon Steel for steel pipeCopper for copper pipe

When ordering specify:Figure No.Nominal Pipe SizeMaterialFinish


BoltSize

M16 630 565 530 520 495 465 460 450 425 410 380 360 350 325 315 245M20 980 880 825 810 775 720 715 700 665 635 595 560 545 505 495 380M22 1210 1085 1025 1005 960 895 885 865 825 785 735 695 670 630 615 475M16 765 695 660 650 620 585 580 565 545 520 490 465 450 425 415 325M20 1190 1085 1030 1010 970 915 905 885 850 815 770 725 705 665 650 510M22 1475 1340 1275 1255 1200 1130 1120 1095 1050 1010 950 900 875 820 805 630M16 920 850 815 805 780 740 735 720 695 670 635 605 590 560 550 445M20 1435 1330 1275 1255 1215 1155 1145 1125 1085 1045 995 950 925 875 860 690M22 1775 1645 1575 1555 1505 1425 1420 1390 1340 1295 1230 1175 1145 1085 1065 855M16 1025 960 925 915 890 850 845 830 805 780 750 715 700 665 655 540M20 1600 1500 1445 1430 1390 1330 1320 1300 1260 1220 1170 1120 1095 1045 1025 845M22 1980 1855 1790 1770 1720 1645 1635 1610 1560 1510 1445 1385 1355 1290 1270 1045M16 1100 1040 1010 1000 975 935 930 920 895 870 835 805 785 755 740 620M20 1720 1625 1575 15690 1520 1460 1455 1435 1395 1355 1305 1255 1230 1180 1160 970M22 2125 2010 1950 1930 1880 1810 1800 1775 1725 1680 1615 1555 1520 1455 1435 1200M16 1155 1100 1070 1060 1040 1000 1000 985 960 940 905 875 860 825 815 690M20 1805 1720 1675 1660 1620 1565 1560 1540 1500 1465 1415 1365 1340 1290 1270 1080M22 2235 2130 2070 2050 2005 1935 1930 1905 1855 1810 1750 1690 1660 1595 1570 1335M16 1200 1150 1120 1110 1090 1055 1050 1040 1015 995 965 935 915 885 875 750M20 1875 1795 1750 1735 1705 1650 1645 1625 1590 1555 1505 1455 1435 1380 1365 1170M22 2320 2220 2165 2150 2105 2040 2035 2010 1965 1920 1860 1805 1775 1710 1685 145090 x 90 x 12

80 x 80 x 1090 x 90 x 1270 x 70 x 1080 x 80 x 10

70 x 70 x 1080 x 80 x 1090 x 90 x 1270 x 70 x 10

90 x 90 x 1270 x 70 x 1080 x 80 x 1090 x 90 x 12

80 x 80 x 1090 x 90 x 1270 x 70 x 1080 x 80 x 10

70 x 70 x 1080 x 80 x 1090 x 90 x 1270 x 70 x 10

125

150

175

35

50

75

100

Length B

52 62 68 70 75 83 84 13787 93 99 108

size

117 122 133

LengthL

188

Maximum load W (kg)

Rolledsteelangle

Beam

Depth x width Mass B C lengthkg/m

388 40343 35289 35253 30224 25201 25238 32

610x305 179 127 25149 20226 30

838x292 194 133 25176 20197 30

762x267 173 122 25147 20170 25152 25140 20125 20140 25125 20113 20101 1698 2089 2082 93 1674 1667 16

122 25109 20

533x210 101 99 2092 1682 16

457x191

117686x254

610x229 108

Beam clipdimensions

914x305

914x419 188

137

Beam

Depth x width Mass B C lengthkg/m74 1667 1660 1654 1267 1657 1651 1245 1054 16

305x165 46 83 1240 1282 2074 20

457x152 67 75 1660 1652 1243 16

254x146 37 75 1231 1046 1239 1030 1025 839 1233 1048 16

305x127 42 62 1637 1233 12

305x102 28 52 1025 828 10

254x102 25 52 1022 8

68203x133

356x127 62

84356x171

406x140 70

Beam clipdimensions

87406x178

Dimensions of clips for universal beams.

Maximum loads ‘W’ for beam clips for universal beam application.

Note: The load given above refers to the load taken by each individual beam clip

Page 83

FIG. 101Universal Beam Clip

FabricatedStructural Steelwork

Section 5

FABRICATED STEEL PIPE SUPPORTS

INDEX


PageNo. PICTORIAL

1F

2F

3F

4F

5F

6F

7F

8F

9F

10F

11F

12F

13F

14F

15F

16F

17F

18F

19F

20F

PIPE SHOEWELDED

PIPE SHOEWELDED

PIPE SHOECLAMPED

PIPE SHOECLAMPED

INVERTED TEEPOST

UPRIGHT TEEPOST

INVERTEDGOAL POST

UPRIGHT GOALPOST

INVERTED ‘L’BRACKET

UPRIGHT ‘L’BRACKET

‘L’ SHAPEDCANTILEVER

UP

‘L’ SHAPEDCANTILEVER

DOWN

POSTS

SUPPORTFROM EXISTING

PIPEWORK

BEAMSUPPORTS

CANTILEVERBRACKET

FROM EXISTINGSTEEL

SLIDINGSUPPORT

GUIDE

PIPE CHAIR

PIPE BASESUPPORT

WALLBRACKET

91

91

92

92

87

87

87

87

88

88

88

88

89

89

89

89

90

90

90

90

Page 84


Page 85


Page 86

Quality Pipe Supports are specialists in fabrication steelwork. The design anddetail of small and large structural frames can be carried out by our engineeringdepartment which can offer practical advice and assistance in all areas.

MATERIALSAll structural steel used is of high quality. Quality Pipe Supports offer a widerange of steels including carbon steel, alloy steel, stainless steel and lowtemperature steels. All steels will have full mechanical and chemical testcertificates. When requested, full traceability of material will be given.

QUALITY ASSURANCEQuality Pipe Supports documented Quality Assurance Manual and Proceduresare written to comply with ISO 9001. Our quality manual is available forinspection on request and we welcome Quality Audits to verify our systems.Where contracts require, a specific quality plan can be submitted andimplemented into our workshops. Comprehensive material traceability is astandard function on all incoming goods. This can be achieved in all stages ofmanufacture on request.

SURFACE FINISHESAll standard surface preparations and finishes are available to steelwork.Shotblasting is carried out to Swedish standard SA 2.5.

At Q.P.S we offer a large range of painting systems to suit all types ofenvironments. If you cannot see the finish you require, then please contact usas alternative surface preparation and finishes can be achieved upon request.

l EXPERIENCE OF FABRICATIONS IN ALL STANDARD SECTIONS.

ll HIGH QUALITY CARBON STEEL, LOW TEMP. STEEL, ALLOYS ANDSTAINLESS STEEL.

ll APPROVED WELD PROCEDURES, QUALIFIED WELDERS.

ll MANUFACTURED TO ISO 9001 REQUIREMENTS.

ll FULL MATERIAL TRACEABILITY WHERE REQUIRED.

ll INDIVIDUAL QUALITY PLAN WHEN REQUESTED.

ll PAINTING, GALVANIZING, PLASTIC COATING FINISHES AVAILABLE.

ll DESIGN FACILITIES GIVING PRACTICAL ADVICE ON HAND.


Page 87

FIG. 5F INVERTED TEE POST FIG. 6F UPRIGHT TEE POST

FIG. 7F INVERTED GOAL POST FIG. 8F UPRIGHT GOAL POST

When ordering specify:Support TypeMaterial SectionsAll dimensions





Page 88

FIG. 9F INVERTED ‘L’ BRACKET FIG. 10F UPRIGHT ‘L’ BRACKET

FIG. 11F ‘L’ SHAPED CANTILEVER UP FIG. 12F ‘L’ SHAPED CANTILEVER DOWN






Page 89

FIG. 13F POSTS FIG. 14F SUPPORT FROM PIPING

FIG. 15F BEAM SUPPORTS FIG. 16F CANTILEVER BRACKETS FROM EXISTING STEEL






Page 90

FIG. 17F SLIDING SUPPORT GUIDE FIG. 18F PIPE CHAIR

FIG. 19F PIPE BASE SUPPORT FIG. 20F WALL BRACKETS






Page 91

FIG. 1F PIPE SHOE

FIG. 2F PIPE SHOE

When ordering specify:Fig. No.Pipe SizeLength LHeight HWidth WMaterial Section


TEE SECTION CUTFROM UNIVERSAL BEAM

W

USE UP TOPIPE SIZE 150 N/B

H

L


W


L

8

H


Page 92



FIG. 4F PIPE SHOE

FIG. 3F PIPE SHOE


W


H

L


W


H

L

Isolation Equipment

Section 6

ISOLATION EQUIPMENT

Hard Wood Block

Insulated 2 Bolt Pipe Clamp

Insulated 3 Bolt Pipe Clamp

Insulated Pipe Saddle

Clip Strip

Isolation ‘U’ Bolt To Grip

Isolation ‘U’ Bolt Non GripPTFE Lined

Isolation ‘U’ Bolt To Grip

Isolation ‘U’ Bolt Non Grip

‘U’ Bolt Isolation Block

101A/101B

107

108

109

110CS

111

112

113G

113NG

114

97

100

100

99

99

96

96

96

97

97

98

98

98

115

116

117

Anti Vibration Pad

Anti Vibration Pad

Slider Unit


Page 93

ISOLATION EQUIPMENT

INDEXFIG. NO DESCRIPTION

PageNo.

PICTORIAL

101A101B

107

HARD WOOD BLOCK 97

INSULATED 2 BOLT PIPE CLAMP 100

108

109

110 CS

111

112

113G

113NG

INSULATED 3 BOLT PIPE CLAMP

INSULATED PIPE SADDLE

CLIP STRIP

ISOLATION ‘U’ BOLT TO GRIP

ISOLATION ‘U’ BOLT NON GRIPPTFE LINED

ISOLATION ‘U’ BOLT TO GRIP

ISOLATION ‘U’ BOLT NON GRIP

100

99

99

96

96

96

97

Page 94

ISOLATION EQUIPMENT

INDEXFIG. NO DESCRIPTION Page

No.PICTORIAL

114

115

116

117

‘U’ BOL T ISOLATION BLOCK

ANTI VIBRATION PAD

ANTI VIBRATION PAD

SLIDER UNIT

97

98

98

98

Page 95

ISOLATION EQUIPMENT

Page 96

PipeSize A B C D E F16.0 60 60 32 6 60 1020.0 65 60 36 6 70 1025.0 65 60 41 6 75 1030.0 75 65 46 6 85 1038.0 80 70 64 10 95 1044.5 80 70 71 10 100 1057.0 90 75 83 10 110 1076.1 95 75 102 12 135 1088.9 100 75 115 12 140 10

108.0 110 75 134 12 170 10159.0 180 120 201 16 250 15219.1 200 120 262 16 315 15

PipeSize A B C D E F15 62 58 38 6 60 1020 65 60 44 6 70 1025 65 60 50 6 72 1032 70 68 70 10 90 1040 82 76 76 10 112 1050 92 76 88 10 112 1080 100 76 115 12 142 10

100 112 80 140 12 168 10150 180 120 210 16 245 15200 200 120 262 16 300 15225 210 120 287 16 345 15250 225 121 316 16 374 15300 250 120 366 16 424 15350 265 120 399 16 457 15400 300 130 449 16 507 15

TO SUIT GALV & ST. ST. PIPE TO SUIT CUPRO-NICKEL PIPESFIG. 111 ISOLATION ‘U’ BOL T (TO GRIP)

Material - ‘U’ Bolt Carbon SteelIsolation - Cork Rubber / ExtrudedF.R NeopreneComplete with 4 Nuts

When ordering specify:Fig. No.Nominal Pipe Size

PipeSize A B C D E F16.0 60 60 32 6 60 1020.0 65 60 36 6 70 1025.0 65 60 41 6 75 1030.0 75 65 46 6 85 1038.0 80 70 64 10 95 1044.5 80 70 71 10 100 1057.0 90 75 83 10 110 1076.1 95 75 102 12 135 1088.9 100 75 115 12 140 10

108.0 110 75 134 12 170 10159.0 180 120 201 16 250 15219.1 200 120 262 16 315 15

PipeSize A B C D E F*15 62 58 38 6 60 10*20 65 60 44 6 70 10*25 65 60 50 6 72 1032 70 68 70 10 90 1040 82 76 76 10 112 1050 92 76 88 10 112 1080 100 76 115 12 142 10

100 112 80 140 12 168 10150 180 120 210 16 245 15200 200 120 262 16 300 15225 210 120 287 16 345 15250 225 121 316 16 374 15300 250 120 366 16 424 15350 265 120 399 16 457 15400 300 130 449 16 507 15

PipeSize152025

*NOTESpacers &Washers Not Required

Material - ‘U’ Bolt Carbon SteelIsolation - Cork Rubber / P.T.F.EExtruded F.R NeopreneComplete with 4 Nuts


TO SUIT GALV & ST. ST. PIPE TO SUIT CUPRO-NICKEL PIPESFIG. 112 ISOLATION ‘U’ BOL T (NON GRIP)



PipeSize A B C D E F16.0 60 60 32 6 60 1020.0 65 60 36 6 70 1025.0 65 60 41 6 75 1030.0 75 65 46 6 85 1038.0 80 70 64 10 95 1044.5 80 70 71 10 100 1057.0 90 75 83 10 110 1076.4 95 75 102 12 135 1088.9 100 75 115 12 140 10

108.0 110 75 134 12 170 10159.0 180 120 201 16 250 15219.1 200 120 262 16 315 15

PipeSize A B C D E F15 62 58 38 6 60 1020 65 60 44 6 70 1025 65 60 50 6 72 1032 70 68 70 10 90 1040 82 76 76 10 112 1050 92 76 88 10 112 1080 100 76 115 12 142 10

100 112 80 140 12 168 10150 180 120 210 16 245 15200 200 120 262 16 300 15225 210 120 287 16 345 15250 225 121 316 16 374 15300 250 120 366 16 424 15350 265 120 399 16 457 15400 300 130 449 16 507 15

TO SUIT GALV & ST. ST. PIPE TO SUIT CUPRO-NICKEL PIPESFIG. 113G ISOLATION ‘U’ BOL T (TO GRIP)

D

E

F

BA

C

D

E

F

BA

C

SPACER

P.T.F.E LINER

D

E

F

BA

C

ISOLATION EQUIPMENT

Page 97

PipeSize A B C D E F16.0 60 60 32 6 60 1020.0 65 60 36 6 70 1025.0 65 60 41 6 75 1030.0 75 65 46 6 85 1038.0 80 70 64 10 95 1044.5 80 70 71 10 100 1057.0 90 75 83 10 110 1076.1 95 75 102 12 135 1088.9 100 75 115 12 140 10

108.0 110 75 134 12 170 10159.0 180 120 201 16 250 15219.1 200 120 262 16 315 15

PipeSize A B C D E F*15 62 58 38 6 60 10*20 65 60 44 6 70 10*25 65 60 50 6 72 1032 70 68 70 10 90 1040 82 76 76 10 112 1050 92 76 88 10 112 1080 100 76 115 12 142 10

100 112 80 140 12 168 10150 180 120 210 16 245 15200 200 120 262 16 300 15225 210 120 287 16 345 15250 225 121 316 16 374 15300 250 120 366 16 424 15350 265 120 399 16 457 15400 300 130 449 16 507 15



PipeSize152025

*NOTESpacers &Washers Not Required

TO SUIT GALV & ST. ST. PIPE TO SUIT CUPRO-NICKEL PIPESFIG. 113 NG ISOLATION ‘U’ BOL T (NON GRIP)

PipeO/D A B C D E G T21.3 50 34 85 8 58 3 2526.9 68 38 90 8 60 3 2533.7 68 40 88 8 60 6 2542.4 84 44 93 8 68 6 2548.3 86 62 120 10 76 6 5060.3 100 68 130 10 76 10 5076.1 130 76 138 16 76 10 5088.9 156 84 140 16 80 10 50

114.3 186 105 160 16 80 10 75168.3 240 130 225 20 120 10 75219.1 344 160 250 20 120 12 75

Material - ‘U’ Bolt - Carbon SteelBlock - Cork / Rubber / Iroko

When ordering specify:Fig No.Nominal Pipe Size

FIG. 114 ‘U’ BOL T ISOLATION BLOCK

Material - Hard Wood

When ordering specify:1. Fig. No2. Pipe O/D3. Dimensions, E, F , G and length

FIG. 101A - 101B HARD WOOD BLOCKS

D

E

F

BA

C

SPACER

D

C

A

PIPE O/D

G

B

E

T THK BLOCK

E

G

F

E

ISOLATION EQUIPMENT

Page 98

FIG. 115 ANTI VIBRATION PAD

FIG. 116 ANTI VIBRATION PAD

FIG. 117 SLIDER UNIT

When ordering specify:Figure No.Dimensions A, B, C, D

When ordering specify:Figure No.Dimensions A, B, C, D

When ordering specify:Figure No.Dimensions A, B, C, D, E, F, G, H

A D

C

B

A D

C

B

A D

C

B

18

C.S. PLATE

ST.ST PLATE

P.T.F.E. PAD

C.S. PLATE

63

36

66

CORK RUBBER PAD

C.S. PLATE

66

2

P.T.F.E. PAD

CORK RUBBER PAD

C.S. PLATE

HE

F

G

ISOLATION EQUIPMENT

Page 99

FIG. 109 INSULATED PIPE SADDLE

Pipe DiaO/D WxT A B C D R16.0 35x5 53 68 8.0 M10 14.020.0 35x5 53 68 10.0 M10 16.025.0 35x5 55 70 12.5 M10 18.530.0 35x5 57 72 15.0 M10 21.038.0 35x8 64 82 19.0 M12 25.044.5 35x8 79 97 22.0 M12 28.057.0 35x8 81 99 28.5 M12 34.576.1 45x10 89 113 38.0 M16 44.088.9 45x10 99 123 44.5 M16 50.5

108.0 45x10 108 132 54.0 M16 60.0133.0 55x15 136 166 66.0 M20 72.5159.0 55x15 155 185 79.5 M20 85.5193.7 55x15 175 205 97.0 M20 103.0219.1 55x15 185 215 109.5 M20 115.5

DiaNB O/D WxT A B C D R15 21.3 35x5 53 68 10 M10 16.520 26.9 35x5 55 70 13 M10 19.525 33.7 35x5 57 72 16 M10 23.032 42.4 35x8 64 82 20 M12 27.040 48.3 35x8 79 97 23 M12 30.050 60.3 35x8 81 99 29 M12 36.065 76.1 45x10 89 113 36 M16 44.080 88.9 45x10 99 123 43 M16 50.5

100 114.3 45x10 108 132 55 M16 63.0150 168.3 55x15 160 190 82 M20 90.0200 219.1 55x15 185 215 107 M20 115.5

Pipe Size

R

O/D1.5 x T RAD

3 TYP

O/D

AB B

A

D DIA BOLTTC

W

MaterialSaddle - Carbon SteelIsolator - Extruded FR NeopreneWhen ordering specify:Figure No.Pipe SizeBolt LengthFinish

Surface Finish : Nuts & Bolts - Bright zinc plated and passivated to BS1706

FIG. 109 Stainless Steel Pipes FIG. 109A Cupro Nickel Pipes

FIG. 110 CLIP STRIP (C.S)

Q.P.SRef No A B C D E

CS-38-6 48 38 9.5 6 5CS-42-6 52 42 9.5 6 5CS-50-6 60 50 9.5 6 5CS-64-6 74 64 9.5 6 5

CS-75-9.5 95 75 13 9.5 10CS-100-9.5 120.0 100 13 9.5 10CS-125-9.5 145 125 13 9.2 10

CS-150-12.5 180 150 19 12.5 15

Q.P.SRef No A B *C *D E

CS-38-3 48 38 6 3 5CS-42-3 52 42 6 3 5CS-50-3 60 50 6 3 5CS-64-3 74 64 6 3 5CS-75-3 95 75 6 3 10

CS-100-3 120.0 100 6 3 10CS-125-3 145 125 6 3 10CS-150-3 180 150 6 3 15

B EE

C

DA

200 400 600 1000 1200

Material - Cork Rubber

When ordering specify:Q.P.S Ref No.Length Required

FIG. 110 FIG. 110A*

All sizes are available in thefollowing standard lengths

ISOLATION EQUIPMENT

Page 100

Pipe Pipe B Dia Dist DiaN/B O/D R WxT A Min C D Tube H15 21.3 16.5 35x5 100 15 10 M10x40 10NB 1220 26.9 19.5 35x5 105 15 10 M10x40 10NB 1225 33.7 23.0 35x5 110 15 10 M10x40 10NB 1232 42.4 27.0 35x5 120 18 12 M10x45 15NB 1540 48.3 30.0 35x5 125 18 12 M12x45 15NB 1550 60.3 36.0 35x5 140 18 12 M12x45 15NB 1565 76.1 44.0 35x5 155 18 12 M12x45 15NB 1580 88.9 50.5 35x5 170 18 12 M12x45 15NB 15

100 114.3 63.0 35x5 195 18 12 M12x45 15NB 15150 168.3 90.0 35x5 255 24 16 M16x55 20NB 19200 219.1 115.5 35x8 325 24 16 M16x60 20NB 19

Pipe B Dia Dist DiaO/D R WxT A Min C D Tube H16.0 14.0 35x5 95 15 10 M10x40 10NB 1220.0 16.0 35x5 95 15 10 M10x40 10NB 1225.0 18.5 35x5 100 15 10 M10x40 10NB 1230.0 21.0 35x5 105 15 10 M10x40 10NB 1238.0 25.0 35x5 120 18 12 M12x45 15NB 1544.5 28.0 35x5 120 18 12 M12x45 15NB 1557.0 34.5 35x5 140 18 12 M12x45 15NB 1576.1 44.0 35x5 155 18 12 M12x45 15NB 1588.9 50.5 35x5 170 18 12 M12x45 15NB 15

108.0 60.0 35x5 190 18 12 M12x45 15NB 15159.0 86.0 35x5 240 24 16 M16x55 20NB 19219.1 116.0 35x8 325 24 16 M16x55 20NB 19

FIG. 107 INSULATED 2 BOLT PIPE CLAMP

FIG 107 Stainless Steel Pipes

FIG 107A Cupro Nickel Pipes

Surface Finish : Nuts & Bolts - Bright zinc plated and passivated toBS1706

MaterialSaddle : Carbon SteelIsolator : Extruded FR NeopreneDistance Tube : BS1387 MediumWhen ordering specify:Figure NoPipe SizeFinish

Pipe Pipe B Dia Dist DiaN/B O/D R WxT A Min C D E Tube H15 21.3 16.5 35x5 100 15 13 M10x45 70 10NB 1220 26.9 19.5 35x5 105 15 13 M10x45 70 10NB 1225 33.7 23.0 35x5 110 15 13 M10x45 70 10NB 1232 42.4 27.0 35x5 120 18 13 M12x50 70 15NB 1540 48.3 30.0 35x5 125 18 15 M12x50 85 15NB 1550 60.3 36.0 35x5 140 18 15 M12x50 80 15NB 1565 76.1 44.0 35x5 155 18 15 M12x50 105 15NB 1580 88.9 50.5 35x5 170 18 15 M12x50 105 15NB 15

100 114.3 63.0 35x5 195 18 15 M12x50 105 15NB 15150 168.3 90.0 35x5 255 24 19 M16x70 95 20NB 19200 219.1 115.5 35x8 325 24 19 M16x70 100 20NB 19

Pipe B Dia Dist DiaO/D R WxT A Min C D E Tube H16.0 14.0 35x5 95 15 13 M10x45 70 10NB 1220.0 16.0 35x5 95 15 13 M10x45 70 10NB 1225.0 18.5 35x5 100 15 13 M10x45 70 10NB 1230.0 21.0 35x5 105 15 13 M10x45 70 15NB 1538.0 25.0 35x5 120 18 15 M12x50 70 15NB 1544.5 28.0 35x5 120 18 15 M12x50 85 15NB 1557.0 34.5 35x5 140 18 15 M12x50 80 15NB 1576.1 44.0 35x5 155 18 15 M12x50 105 15NB 1588.9 50.5 35x5 170 18 15 M12x50 105 15NB 15

108.0 60.0 35x5 190 18 15 M12x50 105 15NB 15159.0 85.5 35x8 240 24 19 M16x50 95 20NB 19219.1 115.5 35x8 325 24 19 M16x50 100 20NB 19

FIG 108 Stainless Steel Pipes

FIG 108A Cupro Nickel Pipes

Surface Finish : Nuts & Bolts - Bright zinc plated and passivated toBS1706

FIG. 108 INSULATED 3 BOLT PIPE CLAMP

MaterialSaddle : Carbon SteelIsolator : Extruded FR NeopreneDistance Tube : BS1387 MediumWhen ordering specify:Figure NoPipe SizeFinish

T

3 TYP

O/DR RAD

A

B

BC

W

1.5T RAD D

2 HOLESDIA H

DISTANCETUBE

OPTIONAL

T

3 TYP

O/DR RAD

B

BC

W

1.5T RAD

D

3 HOLESDIA H

E

A

DISTANCETUBE

OPTIONAL

Unistrut

Section 7

Page 101

Page 102

Page 103

Page 104

Lindapters

Section 8

Page 105

Page 106

Page 107

Page 108

Staircases Walkways& Balustrading

Section 9

Staircases, Walkways & Balustrading

Page 109

Quality Pipe Supports (Q.P.S) Ltd , offer a range of access products to the constructionindustry. A comprehensive service is offered from site measurement to installation.

Our comprehensive design and drawing facilities can handle large or small contracts.Experienced designers can give practical advice and assitance in the design of yourrequirements.

MaterialsOur experience enables us to confidently manufacture in a wide range of materials.From High Quality carbon steel, low temperature steels, alloy steels and stainlesssteels. All welding is performed by qualified welders to approved procedures.

With a total package of design, manufacture and strict quality assurance we are able toprovide a highly efficient service to our customers.

Quality AssuranceAll manufacturing is in accordance with ISO9000:1994. Our fully documented systemsare open to Q.A Audits. All materials used are covered by full chemical and mechanicaltest certificates where available. Where no certification is available (nuts, bolts, etc) acertificate of conformity is provided.

ll STAIRCASES

ll LADDERS

ll STEELWORK

ll HANDRAILS

ll BALUSTRADES

ll FLOORING

ll STEEL ACCESS DOORS

ll WALKWAYS


Page 110


Page 111


Page 112

Date post:	27-Oct-2014
Category:	Documents
Upload:	ahmed-bouali
View:	250 times
Download:	5 times

Quality Pipe Supports Catalogue

Documents