WHAT IS QUANTUM? Quality Management Systems (QMS) have big potential to reduce the gap between the calculated and actual energy performance of the European building stock. The EU funded project QUANTUM is developing and will demonstrate pragmac services and appropriate tools, suitable for widespread use, to support QMS for building performance in the design, construction, commissioning and operation phases. REHVA Journal Technical Arcle: “Quality Management and Digitalizaon for Building Performance” This technical arcle was prepared by the chairs of the REHVA-QUAN- TUM Task Force on Quality Management for Buildings, Ole Teisen, REHVA expert and Chief Consultant at Sweco, and Dr. Stefan Plesser, QUANTUM project coordinator and CEO at synavision. The arcle is published in Issue 6/2018 of the REHVA European HVAC Journal and can be found here. quantum Newsletter 1/4 NL-2019-06-26 WHAT WE DID This project has received funding from the European Union’s Horizon 2020 research and innovaon programme under grant agreement No. 680529. The sole responsibility for the content of this website lies with the authors. It does not necessarily reflect the opinion of the European Communies. The Execuve Agency of Small and Medium Enterprises is not responsible for any use that may be made of the informaon it contains. New Website Secon “Learn” The QUANTUM website has been updated with a new secon called “Learn”. Here it will be possible to download all the training material related to project workshops, webinars, official documentaon and all the relevant files following the outcomes of the project.
Transcript
WHAT IS QUANTUM?
Quality Management Systems (QMS) have big potential to reduce the gap between the calculated and actual energy performance of the European building stock.
The EU funded project QUANTUM is developing and will demonstrate pragmatic services and appropriate tools, suitable for widespread use, to support QMS for building performance in the design, construction, commissioning and operation phases.
REHVA Journal Technical Article: “Quality Management and Digitalization for Building Performance”
This technical article was prepared by the chairs of the REHVA-QUAN-TUM Task Force on Quality Management for Buildings, Ole Teisen, REHVA expert and Chief Consultant at Sweco, and Dr. Stefan Plesser, QUANTUM project coordinator and CEO at synavision.
The article is published in Issue 6/2018 of the REHVA European HVAC Journal and can be found here.
quantum
Newsletter
1/4
NL-2019-06-26
WHAT WE DID
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 680529. The sole responsibility for the content of this website lies with the authors. It does not necessarily reflect the opinion of the European Communities. The Executive Agency of Small and Medium Enterprises is not responsible for any use that may be made of the information it contains.
New Website Section “Learn”
The QUANTUM website has been updated with a new section called “Learn”.Here it will be possible to download all the training material related to project workshops, webinars, official documentation and all the relevant files following the outcomes of the project.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 680529. The sole responsibility for the content of this website lies with the authors. It does not necessarily reflect the opinion of the European Communities. The Executive Agency of Small and Medium Enterprises is not responsible for any use that may be made of the information it contains.
NL-2019-06-26
REHVA-AiCARR workshop „Closing the quality gap: from design to real building”, Venice, 21 February
QUANTUM partner PoliMi-eERG teamed up with REHVA and AiCARR, the Italian Member Association of REHVA, to organize a workshop to discuss the issue of the performance gap between building design and its operational phase.
The workshop „Closing the quality gap: from design to real building”, presented on 21st February, showcased takeaways to reduce the performance gap from QUANTUM and its sister projects, Hit2GAP, Build2Spec and BIM4REN.
7th Project meeting in Copenhagen, hosted by COWI
On February 21st and 22nd QUANTUM partners gathered in Copenha-gen for the 7th project meeting.
The meeting was a good opportunity to review project results and plan for the last months of the QUANTUM project.
QUANTUM workshop at Futurebuild, London, 5th March
On the 5th-7th March 2019, the Futurebuild exhibition was held at Excel London. The aim of Futurebuild was to tackle the biggest chal-lenges impacting the industry.
QUANTUM showcased its tools in a dedicated workshop session tit-led “The QUANTUM-Project: New Standards, Tools and Services for Quality Management of Building Performance” presented by Stefan Plesser, CEO, Synavision, Michele Liziero, Energy Manager, Energy Team SPA and Benjamin De Bruyn, Consultant, Factor4.
The workshop was split into five sections beginning with an introduction of the research project, followed by a deeper dive to the project’s innovative ICT driven tools. To learn more on Futurebuild 2019 and their future events, please visit their website: Futurebuild
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 680529. The sole responsibility for the content of this website lies with the authors. It does not necessarily reflect the opinion of the European Communities. The Executive Agency of Small and Medium Enterprises is not responsible for any use that may be made of the information it contains.
NL-2019-06-26
QUANTUM workshop at ISH, Frankfurt, 14th March
QUANTUM was on stage at ISH 2019 to showcase its tools in a dedica-ted session „QUANTUM-Project: New Standards, Tools and Services for Quality Management of Building Performance“ on 14th March, next to BIM@ISH, Building Forum, Real Estate Forum.
The workshop presented the QUANTUM approach and the developed ICT based tools: the digital performance test bench for technical mo-nitoring, the NG9 energy monitoring tool, and the Comfortmeter
survey tool assessing perceived comfort of occupants, which are all being demonstrated in many buildings across Europe. The four presentations of the tool owner partners were followed by a lively discussion with the participants that lasted during the networking lunch.
QUANTUM at Construmat, Barcelona
Michele Liziero and Fabio Telli, Energy Team SPA, showcased QUAN-TUM tools at Construmat, Barcelona, on 15th May 2019, with a pre-sentation titled „OBTAINING MEASURABLE ENERGY EFFICIENCY WITH ENERGY, COMFORT AND BMS DATA“, within the event.
„New materials and technologies for energy efficient buildings“. The event was organized by LEITAT, research center in Terrassa, Barcelo-na, and allowed the sharing of QUANTUM experience with around 40 stakeholders from the building sector.
New QUANTUM-REHVA Guidebook presented at CLIMA2019
QUANTUM-REHVA Guidebook n.29 “Quality Management for Buil-dings” was officially presented during CLIMA2019 Congress in Bucha-rest, hosted by REHVA, from 27th to 29th May.The Guidebook gives an overview on technical monitoring and com-missioning as a means of Quality Management for Buildings, ad-dressing building owners, with an overall process view rather than a technical one.
REHVA GB n.29 is well defined as the starting point for high Quality Building Performance.
QUANTUM partners will gather in Berlin on September 10th for the last QUANTUM project meeting. Four years since the start of the project, each member of the consortium will have the possibility to conclude the major actions developed over the project lifespan and to address the near future for the QUANTUM tools.
Quality management for building performance
quantum
4/4
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 680529. The sole responsibility for the content of this website lies with the authors. It does not necessarily reflect the opinion of the European Communities. The Executive Agency of Small and Medium Enterprises is not responsible for any use that may be made of the information it contains.
