Quick Disconnect Couplings for - Gonfiottigonfiotti.com/prodotti/832_CPC-Chemical_C.pdfNon-Spill...

Photo

Featuring ChemQuik® High Purity Couplings

Quick Disconnect Couplings for

2 Copyright © 2006 by Colder Products Company. All rights reserved. Colder Products Company, Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.

Colder Products Company

2

This Chemical Management catalog features Colder Products’ most popular andsophisticated products, designed for handling aggressive chemical media. The worldleader in plastic quick disconnect technology, Colder offers you the largest selectionavailable anywhere.

Increase Safety, Time-Savings and Profits

Colder couplings have a variety of unique features to help improve your application:

• Corrosion resistant material combinations provide broad chemical compatibility options

• Automatic shutoff valves allow instant disconnection without draining lines

• All plastic couplings and versions with all plastic and spring-free flow paths

• Pressure-balanced designs allow disconnects and reconnects while under pressure

• Non-spill designs reduce spillage/air inclusion to < 0.1 ml — no more fumes or vapors

• Color-coding and/or physical keying systems help prevent misconnects of critical lines

• Integral fitting terminations are more compact, and reduce assembly time and leak points

• The thumb latch design is easy to use and allows single-handed operation

Chemical Jerry Cans, Drums, IBCs, and Rigid Container Systems

For extraction of chemicals from jerry cans, drums, IBC’s (totes), and other rigidcontainers, Colder offers the DrumQuik® MODULAR system, a closed system thathelps protect operators from fluid or vapor contact. The DrumQuik system can beassembled from off-the-shelf components using any of the Colder coupling modelsfeatured in this catalog. In addition, the new DrumQuik MODULAR UniversalDrum Adaptor kits turn any coupling into a dip-tube system.

Special Design Features

To quickly select the best coupling for your application, look for the colored icons locatedthroughout the catalog to quickly find the coupling series that has the features you want.

Pressure-Balanced Couplings:

Only available from Colder, couplings featuring our unique patented Pressure-Balanceddesign have no springs in the flow path, which eliminates the potential for corrosion andresults in exceptionally high flow capacity. Also, there is no increase in the force-to-connectas system pressure increases, i.e., the coupling is no harder to connect at high pressure thanat ambient pressure. Coupling may be disconnected/reconnected under pressure.

Non-Spill Couplings:

Couplings with this symbol feature Non-Spill valves. Spillage upon disconnect and airinclusion upon reconnect are minimized to almost zero — typically in the range of 0.1 ml or less, a fraction of standard couplings, even when disconnected under pressure.

High Purity Couplings:

High Purity couplings are manufactured and packaged in a manner that helps preservethe purity of high grade PPM, PPB or even PPT chemicals. No lubricants are used in HPcouplings. All ChemQuik® couplings conform to HP specifications. Some models featureall plastic, Pressure-Balanced and/or Non-Spill construction.

General Purpose Couplings:

Couplings with this symbol are intended for general purpose chemical handlingapplications, with emphasis on high performance at the lowest possible cost. Some GPmodels feature Pressure-Balanced and/or Non-Spill construction. Typically GP couplings usea seal lubricant such as Krytox® PFPE (inert in virtually all media) or silicone to facilitatelong life and low force-to-connect.

PB

NS

HP

GP

Member of

ChemQuik,® winner ofthese awards

Copyright © 2006 by Colder Products Company. All rights reserved. Colder Products Company, Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.

Choosing the Right Coupling for your Application

To simplify the process of selecting a coupling for your application, we recommend thatyou first identify the following design parameters, then, proceed to the most appropriatecoupling section, using the table located below.

What is the required flow capacity in gallons per minute (liters per minute)?

What is the acceptable pressure drop at the required flow rate (psid/bar)?

What are acceptable materials of construction for main components, springs and seals?

What is the required operating pressure and temperature?

Is a Non-Spill coupling required or is a small amount of spillage acceptable? Thetrade-off is that a Non-Spill coupling may be a bit larger in size for a given flowcapacity rating and may be slightly more costly.

Are springs located in the flow path acceptable? If NO, choose a Pressure-Balancedcoupling.

Is a High Purity coupling needed or will a General Purpose coupling suffice?

Is all plastic construction required? Are plastic springs located in the flow pathacceptable? If YES, only ChemQuik CQH06 and CQV06 couplings offer these features.ChemQuik CQG06, CQN06, CQN08, and NSH have a spring-free, all plastic flowpath. NS4, NS6, EFC12, and HFC12 have 316SS metal springs in the flow path.

WARNING: Pressure, temperature, chemical type and concentration, and operating environment can affectthe performance of couplings. It is the customer’s responsibility to test the suitability of Colder products intheir own application conditions.

3

*FLOW COEFFICIENT (Cv) is based on imperial units of gpm and psi. FLOW FACTOR (Kv) is based on SI/metric units of lpmand bar. Cv and Kv are related as follows: Kv=14.368xCv.**NOTE: Operational pressure rating varies with operating temperature. Consult individual coupling section for detailedpressure/temperature information. Many couplings are rated for vacuum service. Please consult factory for details and ratings.

PB

NS

HP

1

2

3

4

5

6

7

8

1

2

3

3

38

4

4

5

6

7

NEW!

DrumQuik®

Universal DrumAdaptor Kit

CouplingSeries

*Cv(Kv)Flow Cap. @ 10 psid@25 psid

GPM(LPM)Material

SealMaterialSpring

Material

**Op Press.Psig (Bar)

**Op Temp. ° F (° C)

Non-Spill/Amt in mlPressureBalanced

Purity Grade

Page Number

ChemQuikCQG06

3.2 (46.0)

10.2 (38.6)16.0 (60.6)

NaturalPolypro/

PTFE ValveViton® FKM

Hastelloy CNon-Wetted

Vac - 80(Vac - 5.5)32 - 150(0 - 66)

YES(< 0.1)

YES

HP, No LubeUsed

9

ChemQuikCQH06

1.6 (23.0)

5.1 (19.2)8.0 (30.3)

Natural Polypro

Viton® FKM

PEEK®

Wetted

Vac - 80(Vac - 5.5)32 - 225 (0 - 107)

NO(1.5)NO

HP, No LubeUsed10

ChemQuikCQV06

1.6 (23.0)

5.1 (19.2)8.0 (30.3)

Natural PVDF

Chemraz®

FFKMPEEK®

Wetted

Vac - 80(Vac - 5.5)

0 - 150(-18 - 66)

NO(1.5)NO

HP, No LubeUsed11

ChemQuikCQN06

3.0 (43.1)

9.5 (36.0)15.0 (56.8)

NaturalPTFE/

PTFE ValveChemraz®

FFKMTeflon®

Encapsulated316 SST

Non-WettedVac - 80

(Vac - 5.5)0 - 150

(-18 - 66)YES

(< 0.1)YES

HP, No LubeUsed12

ChemQuikCQN08

7.3 (104.9)

23.1 (87.4)36.5 (138.2)

NaturalPTFE/PFA

Chemraz®

FFKMTeflon®

Encapsulated316 SST

Non-WettedVac - 80

(Vac - 5.5)0 - 150

(-18 - 66)YES

(< 0.15)YES

HP, No LubeUsed13

NSH

3.3 (47.4)

10.4 (39.4)16.5 (62.4)

Glass-Filled, Gray

PolyproEPDM

316 SSTNon-wetted

Vac - 120 (Vac - 8.3)

32-120(0 - 49)

YES(< 0.1)

YES

GP, Krytox®

PFPE Used14

NS6

2.2 (31.6)

7.0 (26.3)11.0 (41.6)

Glass-Filled, Gray Polypro/

TPE caseEPDM

316 SSTWetted

Vac - 120 (Vac - 8.3)32 - 160(0 - 71)

YES(< 0.1)

NO

GP, Krytox®

PFPE Used16

NS4

0.6 (8.6)

1.9 (7.2)3.0 (11.4)

Glass-Filled, Gray Polypro/

TPE caseEPDM

316 SSTWetted

Vac - 120 (Vac - 8.3)32 - 160(0 - 71)

YES(< 0.1)

NO

GP, KrytoxPFPE Used

18

HFC-12

2.0 (28.7)

6.3 (23.9)10.0 (37.9)

Gray,Unfilled PolyproEPDM

316 SSTWetted

Vac - 60(Vac - 4.1)32 - 160(0 - 71)

NO(1.5)NO

GP, SiliconeLube Used

20

EFC12

0.87 (12.5)

2.8 (10.4)4.4 (16.5)

Gray,Unfilled PolyproEPDM

316 SSTWetted

Vac - 105(Vac - 7.2)32 - 160(0 - 71)

NO(1.0)NO

GP, SiliconeLube Used

22

NS

PB

HP GP

GP

Table of ContentsCouplings connected and shown actual size (approximate).For additional terminations and configurations, see product pages.

CQH06 SeriesCQHD06 20 0106 05 & CQHD06 10 0106 05

(05 color-coded option shown)

10PAGE

High Purity ChemQuik® Series

4Copyright © 2006 by Colder Products Company. All rights reserved. Colder Products Company, Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.

CQG06 SeriesCQGD06 20 0108 & CQGD 06 10 0108

Wetted Material: Natural, VirginPolypropylene, PTFE, Viton® FKMFlow Rating: Cv 3.2/Kv 46.0Temperature Rating: 32-150° F, 0-66° CPressure Rating: Vac-80 psig, 5.5 bar

9PAGE

Wetted Material: Natural, VirginPolypropylene, PEEK®, Viton® FKMFlow Rating: Cv 1.6/Kv 23.0Temperature Rating: 32-225° F, 0-107° CPressure Rating: Vac-80 psig, 5.5 bar

PB NSHP

HP

Smart Coupling Technology

Smart Coupling Technology OverviewThis section describes how the application of Colder’s innovative RFIDelectronic data transfer capability can make our couplings safer to useand provide valuable process/tracking information to user systems.

8PAGE


Wetted Material: Virgin PTFE (modified,Dyneon™ TFM and/or Teflon® NXT 75),Chemraz® FFKMFlow Rating: Cv 3.0/Kv 43.1Temperature Rating: 0-150° F, -17-66° CPressure Rating: Vac-80 psig, 5.5 bar

12PAGE PB NSHP

CQV06 SeriesCQVD06 20 0108 & CQVD06 10 0106

Wetted Material: Natural, Virgin PVDF,PEEK®, Chemraz® FFKMFlow Rating: Cv 1.6/Kv 23.0Temperature Rating: 0-225° F, -17-107° C(see note)Pressure Rating: Vac-80 psig, 5.5 bar

NOTE: If coupling will be left disconnectedwhile under pressure and temperature, thenlimit temperature to 150° F, 65° C.

11PAGE HP

High Purity ChemQuik® Series

CQN08 SeriesCQND08 20 0112 05 & CQND08 10 0116 05

(05 color-coding & physical key shown)

Wetted Material: Virgin PTFE (modified,Dyneon™ TFM and/or Teflon® NXT 75) and/orPFA, Chemraz® FFKMFlow Rating: Cv 7.3/Kv 104.9 (Cv 9.4/Kv 135.1with non-valved insert)Temperature Rating: 0-150° F, -17-66° CPressure Rating: Vac-80 psig, 5.5 bar

13PAGE PB NSHP

CQN06 SeriesCQND06 20 0108 & CQND06 10 0108

General Purpose Series

NS4 SeriesNS4D22002 & NS4D17006

Wetted Material: Glass-Filled, Gray Polypropylene, EPDM, 316SSFlow Rating: Cv 0.6/Kv 8.6Temperature Rating: 32-160° F, 0-71° CPressure Rating: Vac-120 psig, 8.3 bar

18PAGE

NS6 SeriesNS6D22006 & NS6D17008

Wetted Material: Glass-Filled, Gray Polypropylene, EPDM, 316SSFlow Rating: Cv 2.2/Kv 31.6Temperature Rating: 32-160° F, 0-71° CPressure Rating: Vac-120 psig, 8.3 bar

16PAGE

NSH SeriesNSHD22006 & NSHD17012

Wetted Material: Glass-Filled, Gray Polypropylene, EPDMFlow Rating: Cv 3.3/Kv 47.4Temperature Rating: 32-120° F, 0-49° CPressure Rating: Vac-120 psig, 8.3 Bar

14PAGE

HFC12 SeriesHFCD22612 & HFC171212

Wetted Material: Gray Polypropylene,EPDM, 316SSFlow Rating: Cv 2.0/Kv 28.7Temperature Rating: 32-160° F, 0-71° CPressure Rating: Vac-60 psig, 4.1 bar

20PAGE


PB NS

NSNEW!

NEW!

GP

GP

NSGP

GP

EFC12 SeriesEFCD22412 & EFCD17612

22PAGE Material: Gray Polypropylene, EPDM,316SSFlow Rating: Cv 0.87/Kv 12.5Temperature Rating: 32-160° F, 0-71° CPressure Rating: Vac-105 psig, 7.2 bar

GP

Press together to assemble

Dip-Tube BushingCoupling Insert Coupling Body


DrumQuik® Series Dip-Tube Systems for Rigid Containers (photos shown not to scale)

Coupling Accessories

DrumQuik®

MODULAR Series2-Port Drum Insert

Works with HFC12, NSH & ChemQuik® couplings

Wetted Material: Virgin Polypropylene or PTFEFlow Rating (Cv): Dependent on coupling usedTemperature Rating: 0-150° F, -17-65° CPressure Rating: Vac-45 psig, 3.1 bar

24PAGE HP

NEW!

NEW!

NEW!

(shown with shipping plugs installed)

(shown with couplings installed)

DrumQuik® UniversalDrum and BottleAdaptor KitsAny coupling with a 3/4 male NPT termination can nowbecome a dip-tube that screws into standard closures.Single, 2-port and 2-port bottle designs available.

Works with HFC12, NSH and ChemQuik® couplings.

Wetted Material: Polypropylene or PTFEFlow Rating (Cv): Dependent on coupling usedTemperature Rating: 0-150° F, -17-65° CPressure Rating: Vac-15 psig, 1 bar

26PAGE

DrumQuik® Asian Drum Adaptor KitsAdaptor facilitates connection to center port of Asian drum closures with integral dip-tubes.

Wetted Material: Virgin PolypropyleneFlow Rating (Cv): Dependent on coupling usedTemperature Rating: 0-225° F, -17-107° CPressure Rating: Vac-45 psig, 3.1 bar

27PAGE

Dual Containment System for TubingDust Caps and PlugsPanel Mount AdaptorsColored Flare Nuts and Keying System for Couplings

28PAGE

Dimensions

31PAGE

Type AFor use with closure plugs

with a 3/4" NPS center port.

Type BFor use with closure plugs witha 1-3/8" buttress center port.

GP

HPGP

HPGP

NEW!

This section details the major dimensions for each product featured in thiscatalog, highlighting lengths in both the connected and disconnectedstate.

Copyright © 2006 by Colder Products Company. All rights reserved. Colder Products Company, Colder Products and CPC are registered trademarks with the US Patent & Trademark Office.8

IdentiQuik™ Series CouplingsColder’s IdentiQuik™ series of Smart Couplings utilizesRFID technology to automatically identify fluid productsand their characteristics and capture data from point-of-origin through point-of-use. Data stored on the packageinsert or fluid delivery line is transferred across thecoupling before the two halves are connected. Your controlsystem obtains this data via RS232 communications anduses it to improve safety, prevent misconnections, avoiddangerous combinations, verify processes, protect yourbrand, and capture important process data.

Smart Coupling Technology with Integrated RFID

The IdentiQuik series of couplings from Colder Products Companyadds the power of RFID to your fluid management process.

RFID tags, storing up to 64 bytes of data, are encapsulated on couplinginserts. Product identification, date, batch, and lot codes can beautomatically transferred from inserts on bags, totes, drums,and supply lines to the connecting dispense or fill lines.

Identification of an authorized connection can be achievedand used to notify a machine to turn on, start a pump or alterflow rates.

This data can be used to initiate logic control, such as a turningon a pump, preventing misconnections, validating process recipes,locking out hazardous mixing at a systems level, all resulting inimproved safety and more cost-efficient process control.

Smart coupling technology can be applied to virtually any Coldercoupling series. Colder engineers work with you to identify theoptimal solution for your application.

IDQU Series

The Universal Dispensing Coupling, designed for bag-in-box andrigid packaging offers a screw on cap or disposable fitment for 38mmspouts. Polypropylene bodies with EPDM seals offer greater chemicalresistance and NSF listings. Available in 3/8” flow with hose barbs for1/4”-3/4” ID tubing.

IDQ Series

The intelligent version of our widely popular PLC series features acetalbodies with 1/4” flow and hose barbs for 1/4”-3/8” ID tubing.

Straight thru and shutoff bodies are available. In-line and elbow insertswith built-in RFID tags can be used for in-line and bag-in-boxapplications.

IDQ12 Series

A polypropylene version of the IDQ series is available with hose barbsfor 1/4” and 3/8” ID tubing. Shown here with non-valved insert andencapsulated RFID tag.

Contact our team of “smart” experts for assistance in applying thisrevolutionary capability to your coupling application.

ANTENNA

RFID TAG:stores fluid data

INTERFACE CABLE

STANDARD COLDER COUPLINGS:full range of terminations, flowsizes, materials, etc.

RFID TAGINTERROGATOR

Smart Coupling Technologywith Integrated RFID

IDQ & IDQ12 Series

IDQU Series

ChemQuik® CQG06 SeriesMaterial: Polypropylene

The CQG06 Series is the lowest cost version of our Pressure-Balanced, Non-Spill, High Purity couplings. Molded virginpolypropylene, Viton® seals and a 100% springless andmetal-free flow path provide broad chemical resistance andexceptionally high flow capacity, allowing instantdisconnects (and reconnects), even under pressure.

9

Applications:

• copy

• copy

• copy

Applications may include:

• Portable chemical cartconnections

• Equipment, pump andfilter connections

• Drums and IBC (tote)connections

• DI water line connections

Materials:Main components: Natural, virgin polypropyleneSeals: Viton® FKM

Optional: Simriz® FFKM perfluoroelastomerSprings (non-wetted): Hastelloy CFlare nuts: PVDF

Lubricants: None used

Spillage (air inclusion): <0.1 cc (ml)/disconnect (reconnect)

Panel Mount: Optional adaptor kit (see accessories section)

Keying System: Mechanical keying and color-coding (see page 30)

Compatible with ChemQuik® Dual Containment System Compatible with DrumQuik® MODULAR Dispense System, Universaland Asian Drum Adaptors.

TUBING/THREAD SIZE TERMINATION TYPE PART NO.3/8" OD Flare Compression CQGD06 10 01061/2" OD Flare Compression CQGD06 10 01083/4" OD Flare Compression CQGD06 10 01121/2 Taper Male NPT CQGD06 10 0208

Coupling BodiesPolypropyleneIn-LineBodies

TUBING/THREAD SIZE TERMINATION TYPE PART NO.3/8" OD Flare Compression CQGD06 20 01061/2" OD Flare Compression CQGD06 20 01083/4" OD Flare Compression CQGD06 20 01123/8 Taper Male NPT CQGD06 20 0206†1/2 Taper Male NPT CQGD06 20 02083/4 Taper Male NPT CQGD06 20 0212†

Coupling InsertsPolypropyleneIn-LineInserts

CQG06 Series Specifications

FEATURES BENEFITSNon-Spill design Ultimate protection from chemicals and

fumes

Pressure-Balanced design Failsafe disconnect, even under pressure;easy to reconnect at high pressure

Springless flow path design Eliminates source of metallic contaminants

Mechanical keying system Helps prevent accidental misconnects


For accessories, see page 28. For dimensions, see page 31.†Indicates coupling that can be used with DrumQuik® (see pages 24-27).

Flow Rate (gpm)

ChemQuik® CQHD06 Flow Performance

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 10.0 12.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)

ChemQuik® CQVD06 Flow Performance

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 10.0 12.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)

ChemQuik® CQGD06 Flow Performance

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)

NS4 Flow Performance

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

1.0 2.0 3.0 4.0 5.0

3.8 (lpm) 7.6 11.4 15.1 18.9

3

Flow Rate (gpm)

ChemQuik® CQND06 Flow Performance

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)

NSH Flow Performance

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 12.0 16.0 18.014.010.0

7.6(lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6 68.1

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)

HFC12 Flow Performance

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 6.04.0 8.0 10.0 12.0 14.0 16.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)

EFC12 Flow Performance

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

1.0 2.0 3.0 4.0 6.05

3.8 (lpm) 7.6 11.4 15.1 18.9 22.7

3

Cv~3.0

Cv~3.3

Cv~2.0

Cv~3.2

Kv=46.0

Kv=47.4 Kv

Kv=28.7

Kv=43.1

K

Cv~0.6

Cv~0.8

Cv~1.6

Cv~1.6

Cv~2.2

Kv=23.0

Kv=23.0

Kv=31.6

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 30.0 40.0 45.03

18.9(lpm) 37.9 56.8 75.7 94.6 113.6 132.5 151.4 170.3189.3

3

CQND08 Double-sided

shut-offC

ChemQuik® CQND06 Pressure Range

Fluid Pressure (psig)

Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

ChemQuik® CQGD06 Pressure Range

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

ChemQuik® CQHD06 Pressure Range

121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

ChemQuik® CQVD06 Pressure Range

121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0

EFCD12 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

160

140

120

100

80

60

40

20

0

ChemQuik® CQND08 & CQN08 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

160

140

120

100

80

60

40

20

0

CQN08 Single-sided

shut-off

1.72 (bar) 3.45 5.17 6.89 8.62

71.1

60.0

48.9

3

160

140

120

1

NSH Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

NS4 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

160

140

120

100

80

60

40

20

0

NS6 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

PB NSHP

Shaded area indicates operating range.

Patent Protected


ChemQuik® CQH06 SeriesMaterial: Polypropylene – All Plastic

The CQH06 Series is the most compact and lowest cost version of our ChemQuik® High Purity couplings. They are all plasticcouplings with no metal components. Molded, virgin, naturalpolypropylene, Viton® FKM seals, PEEK® plastic springs, and lube-free design provide broad compatibility and high flow capacity.

Materials:Main components: Natural, virgin polypropyleneValve seals: Viton® FKM (black)

Optional: EPDM, Chemraz® FFKM perfluoroelastomer (white)External insert seal: Simriz® FFKM perfluoroelastomer (black)NOTE: Simriz™ FFKM seal material will be used when optional Viton® FKM or EPDM valve seals are ordered.

Valve (wetted) and thumb latch spring: PEEK®

Optional: PPS, Teflon® Encapsulated 316SSFlare nuts: PVDF


Spillage (air inclusion): ~1.5cc (ml)/disconnect (reconnect)

Keying System: Color-coding only, mechanical key not available (see page 30)

Compatible with ChemQuik® Dual Containment System Compatible with DrumQuik® MODULAR Dispense System, Universal and Asian Drum Adaptors.

10

Panel MountTUBING/THREAD SIZE TERMINATION TYPE PART NO.

1/4" OD Flare Compression CQHD06 11 01043/8" OD Flare Compression CQHD06 11 01061/2" OD Flare Compression CQHD06 11 01083/8 Taper Male NPT CQHD06 11 0206

TUBING/THREAD SIZE TERMINATION TYPE PART NO.1/4" OD Flare Compression CQHD06 20 01043/8" OD Flare Compression CQHD06 20 01061/2" OD Flare Compression CQHD06 20 01083/4" OD Flare Compression CQHD06 20 01123/8 Taper Male NPT CQHD06 20 0206†3/4 Taper Male NPT CQHD06 20 0212†

Coupling Bodies

Coupling Inserts

TUBING/THREAD SIZE TERMINATION TYPE PART NO.1/4" OD Flare Compression CQHD06 10 01043/8" OD Flare Compression CQHD06 10 01061/2" OD Flare Compression CQHD06 10 01083/4" OD Flare Compression CQHD06 10 01123/8 Taper Male NPT CQHD06 10 0206

Patent Protected

PolypropyleneIn-Line

CQH06 Series Specifications

FEATURES BENEFITS100% metal free No risk of metal contaminants or corrosion

High flow valve design High flow in a compact package

Disconnect under pressure Speeds servicing and reduces risk of injury

Color coding system Helps prevent line misconnects

For accessories, see page 28. For dimensions, see page 31. †Indicates coupling that can be used with DrumQuik® (see pages 24-27).




• DI water line connections/DI spray guns

• Sampling port lines

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 10.0 12.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 10.0 12.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

F

ChemQuik®

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60 18.9 (lpm) 37.9 56.8 75.7 94.6

3

ChemQuik®

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5

18.9 (lpm) 37.9 56.8 75.7 94.6

3

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5

18.9 (lpm) 37.9 56.8 75.7 94.6

3

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 12.0 16.0 18.014.010.0

7.6(lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6 68.1

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 6.04

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6

3

Cv~1.6

Cv~1.6

Cv~2.2

Kv=23.0

Kv=23.0

Kv=31.6

F

C

Flui

dTe

mpe

ratu

re(°

F)

1.

0

C

160

140

120

100

80

60

40

20

0

Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

160

140

120

100

80

60

40

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0

erat

ure

(°F)

1.72 (bar) 3.45 5.17 6.89 8.62

160

140

120

100

80

6

Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

160

140

120

100

80

60

40

20

0

NS6 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

PolypropyleneIn-Line

HP


New &improved!



• Equipment, pump and filterconnections

• Aggressive acid lines• Sampling port lines

ChemQuik® CQV06 SeriesMaterial: PVDF – All Plastic

The CQV06 Series couplings are similar to the all plastic CQH06Series couplings; however, they feature molded, virgin PVDF, with superior acid, UV and fire-resistant properties, passing ASTM,UL and ISO testing standards. Chemraz® FFKM perfluoroelastomerseals, PEEK® plastic springs and lube-free design provide broadcompatibility and high flow capacity.


Patent Protected

PVDFIn-Line

TUBING/THREAD SIZE TERMINATION TYPE PART NO.1/4" OD Flare Compression CQVD06 20 01043/8" OD Flare Compression CQVD06 20 01061/2" OD Flare Compression CQVD06 20 0108

**3/4" OD Flare Compression CQVD06 20 01123/8 Taper Male NPT CQVD06 20 0206†

**3/4 Taper Male NPT CQVD06 20 0212†

Panel MountTUBING/THREAD SIZE TERMINATION TYPE PART NO.

1/4" OD Flare Compression CQVD06 11 01043/8" OD Flare Compression CQVD06 11 01061/2" OD Flare Compression CQVD06 11 01083/8 Taper Male NPT CQVD06 11 0206†

Coupling BodiesTUBING/THREAD SIZE TERMINATION TYPE PART NO.

1/4" OD Flare Compression CQVD06 10 01043/8" OD Flare Compression CQVD06 10 01061/2" OD Flare Compression CQVD06 10 0108

**3/4" OD Flare Compression CQVD06 10 01123/8 Taper Male NPT CQVD06 10 0206

PVDFIn-Line

CQV06 Series Specifications

FEATURES BENEFITSPVDF material Superior acid resistance and purity; UV stable

100% metal-free No risk of metal contaminants or corrosion

Standard Chemraz® seals Broadest chemical resistance and purity

UV stable and fire-resistant Suitable for extreme environments

Coupling Inserts

For accessories, see page 28. For dimensions, see page 31.†Indicates coupling that can be used with DrumQuik® (see pages 24-27). ** Special order only.

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 10.0 12.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 10.0 12.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 12.0 16.0 18.014.010.0

7.6(lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6 68.1

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 6.04.0 8.0 10.0 12.0 14.0 16.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6

3

Cv

Cv

Cv~

CvCv~1.6

Cv~1.6

Cv~2.2

Kv=23.0

Kv=23.0

Kv=31.6

F

ChemQuik® CQND06


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

ChemQuik® CQGD06

160

140

120

100

80

60

40

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

160

140

120

100

80

60

40

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0

HFCD12 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

160

140

120

100

80

60

40

20

0

NSH Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

160

140

120

100

80

60

40

20

0

NS6 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

HP


Materials:Main components: Natural, virgin PVDFValve seals: Chemraz® FFKM perfluoroelastomer (white)

Optional: EPDM, Viton® FKMExternal insert seal: Chemraz® FFKM perfluoroelastomer (white)NOTE: Simriz™ FFKM will be used when optional EPDM or Viton valve seal is ordered. White Chemraz™ FFKM will be used when optional Chemraz® FFKM valve seal is ordered.

Valve (wetted) and thumb latch spring: PEEK®

Optional: PPS, Teflon® Encapsulated 316SSFlare nuts: PVDF


Spillage (air inclusion): ~1.5cc (ml)/disconnect (reconnect)

Keying System: Color-coding only (mechanical key not available, see page 30)Compatible with ChemQuik® Dual Containment System Compatible with DrumQuik® MODULAR Dispense System, Universal and Asian Drum Adaptors.

New &improved!


ChemQuik® CQN06 SeriesMaterial: PTFE

The CQN Series features Colder’s patented Pressure-Balancedtechnology in a Non-Spill coupling that can be disconnectedand reconnected under pressure. A springless, 100% metal andlubricant-free flow path design, and PTFE material, with itsalmost universal chemical compatibility and ultra high purity,make them ideal for the most demanding applications inmicroelectronic, pharmaceutical and laboratory industries.

12




• Drums and IBC (tote)connections

• Those requiring universalchemical compatibility

Materials:Main components: Natural, virgin modified** PTFE (ECTFE thumb latch)**NOTE: Dyneon™ TFM and/or Teflon® NXT-75Seals: Chemraz® FFKM perfluoroelastomer

Optional: Simriz® FFKM perfluoroelastomer (lower cost)Springs (non-wetted): Teflon® encapsulated (not coated) 316 SS(Ultra pure fluids are isolated by two degrees of protection. Therefore, the CQN06 & CQN08 Series quick disconnects incorporate the superior performance of metal springs without the danger of fluidcontamination. Only Teflon® encapsulated springs located out of the flow path can assure this.)

Dowel pins: PCTFEFlare nuts: PVDF, PFA optional


Spillage (air inclusion): <0.1 cc (ml)/disconnect/reconnect


Keying System: Mechanical keying and color coding (see page 30)Compatible with ChemQuik® Dual Containment System Compatible with DrumQuik® MODULAR Dispense System, Universal and Asian Drum Adaptors.

CQN06 Series Specifications

For accessories, see page 28. For dimensions, see page 31. †Indicates coupling that can be used with DrumQuik® (see pages 24-27).

FEATURES BENEFITSNon-Spill design Ultimate protection from chemicals and fumes

PTFE material and Can be used with almost any chemicalChemraz® FFKM seals

Springless & metal-free No contaminants and exceptional flow capacity

Mechanical & color keys Helps prevent accidental misconnects

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 10.0 12.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 10.0 12.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

1

3.8 (lpm) 7.6 11.4 15.1 18.9

3

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 12.0 16.0 18.014.010.0

7.6(lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6 68.1

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 6.04.0 8.0 10.0 12.0 14.0 16.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

F

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

1.0 2.0 3.0 4.0 6.05

3.8 (lpm) 7.6 11.4 15.1 18.9 22.7

3

Cv~3.0

Cv~3.3

Cv~2.0

Cv~3.2

Kv=46.0

Kv=47.4 Kv

Kv=28.7

Kv=43.1

K

Cv~1.6

Cv~1.6

Cv~2.2

Kv=23.0

Kv=23.0

Kv=31.6

F

C

Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5

18.9(lpm) 37.9 56.8 75.7 94.6 113.6 132.5 151.4 170.3189.3

3


Fluid Pressure (psig)Fl

uid

Tem

pera

ture

(°F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0

Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

160

140

120

100

80

60

40

20

0

ChemQuik®

Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

160

140

120

100

80

60

40

20

0



Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

NSH Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

160

140

120

100

80

60

40

20

0

NS6 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

PB NSHP

TUBING/THREAD SIZE TERMINATION TYPE PART NO.1/4" OD Flare Compression CQND06 20 01043/8" OD Flare Compression CQND06 20 01061/2" OD Flare Compression CQND06 20 01083/4" OD Flare Compression CQND06 20 01123/4 Taper Male NPT CQND06 20 0212†1/2 Taper Female NPT CQND06 20 0308

Coupling InsertsPTFEIn-Line

TUBING/THREAD SIZE TERMINATION TYPE PART NO.1/4" OD Flare Compression CQND06 10 01043/8" OD Flare Compression CQND06 10 01061/2" OD Flare Compression CQND06 10 01083/4" OD Flare Compression CQND06 10 01121/2 Taper Female NPT CQND06 10 0308

Coupling BodiesPTFEIn-Line


Patent Protected

The Ultimate Coupling

The Ultimate Coupling

Materials:Main components: Natural, virgin modified** PTFE & PFA**NOTE: Dyneon™ TFM and/or Teflon® NXT-75

Seals: Chemraz® FFKM perfluoroelastomerOptional: Simriz® FFKM perfluoroelastomer (lower cost)

Springs (non-wetted): Teflon® encapsulated (not coated) 316 SS(Ultra pure fluids are isolated by two degrees of protection. Therefore, the CQN06 & CQN08 Series quick disconnects incorporate the superior performance of metal springs without the danger of fluidcontamination. Only Teflon® encapsulated springs located out of the flow path can assure this.)

Dowel pins: PCTFEFlare nuts: PVDF, PFA optionalLubricants: None used

Spillage (air inclusion): ~0.1 cc (ml)/disconnect/reconnect


Keying System: Mechanical keying and color-coding (see page 30)Compatible with ChemQuik® Dual Containment System Compatible with DrumQuik® MODULAR Dispense System, Universal and Asian Drum Adaptors.

CQN08 Series Specifications

FEATURES BENEFITSLarge flow capacity Fast fluid transfer(7.3 to 9.4 Cv)

Non-Spill design Ultimate protection from chemicals and fumes

Pressure-Balanced design Large flow capacity, yet as easy to connect underpressure as at 0 psig

Mechanical and color keys Helps prevent accidental misconnects


ChemQuik® CQN08 SeriesMaterial: PTFE

As big brother to the CQN06 Series, the CQN08 Series couplings have all ofthe same great features but in a larger flow size. Extremely rugged, they aredesigned for aggressive high flow/high purity applications. Coupling insertscan be panel mounted. The unique keying system helps prevent misconnects.

13

TUBING/THREAD SIZE TERMINATION TYPE PART NO.3/4" OD Tube Flare Compression CQND08 20 01121" OD Tube Flare Compression CQND08 20 0116

3/4 Taper Thread Male NPT CQND08 20 0212†3/4 Taper Thread Female NPT CQND08 20 0312

**3/4 Taper Thread Female NPT (non-valved) CQN08 20 0312

PTFEIn-Line

TUBING/THREAD SIZE TERMINATION TYPE PART NO.3/4" OD Tube Flare Compression CQND08 10 01121" OD Tube Flare Compression CQND08 10 0116

3/4 Taper Thread Male NPT CQND08 10 0212†3/4 Taper Thread Female NPT CQND08 10 0312

Coupling BodiesPTFEIn-Line

For accessories, see page 28. For dimensions, see page 31.†Indicates coupling that can be used with DrumQuik® (see pages 24-27).**Special order only, this non-valved coupling insert will yield a Cv of 9.4 when coupled with valved body.


• Bulk chemical transfer(drums, IBCs, ISO-tainers,tanker trucks, etc.)



• Those requiring universalchemical compatibility

Flow Rate (gpm)


Pp

(p)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 10.0 12.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pp

(p)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 10.0 12.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

1.0 2.0 3.0 4.0 5.0

3.8 (lpm) 7.6 11.4 15.1 18.9

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


P

0.00

2.0 4.0 6.0 8.0 12.0 16.0 18.014.010.0

7.6(lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6 68.1

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 6.04.0 8.0 10.0 12.0 14.0 16.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

1.0 2.0 3.0 4.0 6.05.0

3.8 (lpm) 7.6 11.4 15.1 18.9 22.7

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Cv~3.0

Cv~3.3

Cv~2.0

Cv~3.2

Kv=46.0

Kv=47.4 Kv=12.5

Kv=28.7

Kv=43.1

Kv=8.6

Cv~0.6

Cv~0.8

Cv~1.6

Cv~1.6

Cv~2.2

Kv=23.0

Kv=23.0

Kv=31.6

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 30.0 40.0 45.035.0 50.025.0

18.9(lpm) 37.9 56.8 75.7 94.6 113.6 132.5 151.4 170.3189.3

3.44

4.14

2.75

2.07

1.38

0.69 (bar)Cv~9.4

Cv~7.3Kv=104.9

CQND08 Double-sided

shut-offCQN08

Single-sided shut-offKv=135.1



Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0



Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0



Flui

dTe

mpe

ratu

re(°

F)1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

CQN08 Single-sided

shut-off



Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

NSH Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

NS4 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

NS6 Pressure Range


F

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

CQND08 Double-

sided shut-off

PB NSHP

non-valved

valved


Coupling Inserts

NSH SeriesMaterial: Polypropylene

The NSH Series couplings are general purpose versions of ourPressure-Balanced, Non-Spill, ChemQuik® CQG06 couplings.Molded polypropylene, EPDM seals and a 100% springless andmetal-free flow path provide broad chemical resistance andexceptionally high flow capacity, allowing instant disconnects(and reconnects), even under pressure. Their non-spill designvirtually eliminates spills, minimizes downtime and enhancesoperator safety in a very low cost package.

14




• Drums & IBC (tote)connections

• Water treatment plants, carwashes, industrial laundry

FEATURES BENEFITSNon-Spill design Ultimate protection from chemicals and fumes

Pressure-Balanced design Failsafe disconnect, even if under pressure; easy to reconnect at high pressure

Springless flow path design Eliminates source of metallic contaminants

Optional color-coding Helps prevent accidental misconnects


Coupling Bodies


PB NSGP

THREAD SIZE TERMINATION TYPE PART NO.3/8" NPT Female NPT Thread NSHD190063/8" BSPT Male BSPT Thread NSHD10006BSPT†1/2" NPT Male NPT Thread NSHD100083/4" NPT Male NPT Thread NSHD10012†

PolypropylenePipe Thread

TUBING SIZE METRIC EQ. TERMINATION TYPE PART NO.3/8" OD 9.5mm OD Compression NSHD130061/2" OD 12.7mm OD Compression NSHD13008

In-LineCompression

TUBING SIZE METRIC EQ. TERMINATION TYPE PART NO.3/8" ID 9.5mm ID Hose Barb NSHD170061/2" ID 12.7mm ID Hose Barb NSHD170085/8" ID 15.9mm ID Hose Barb NSHD170103/4" ID 19.0mm ID Hose Barb NSHD17012

Hose Barb

Patent Protected

Color-coded NSH couplings.

NEW!


NSH Series SpecificationsMaterials:Main components: Glass-filled, light gray polypropyleneThumb latch: Glass-filled, dark gray polypropyleneSeals: EPDMOptional: Viton® FKM

Springs (non-wetted): 316 stainless steelOptional: Hastelloy C

Compression nuts: Glass-filled, white polypropylene

Lubricants: Krytox® PFPE (inert)

Spillage (air inclusion): <0.1 cc (ml)/disconnect (reconnect)


Keying System: Color-coding only (red or blue), mechanical key not availableCompatible with ChemQuik® Dual Containment System Compatible with DrumQuik® MODULAR Dispense System, Universal and Asian Drum Adaptors.

15




Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0



Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0



Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

CQN08 Single-sided

shut-off



Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

NSH Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

NS4 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

NS6 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

CQND08 Double-

sided shut-off

ance

P

12.0

7 9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

F

ance

P

12.0

7 9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)

ChemQuik® CQGD06 Flow PerformancePr

essu

reD

rop

(psi

d)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

1.0 2.0 3.0 4.0 5.0

3.8 (lpm) 7.6 11.4 15.1 18.9

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

F18.01

68.1

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 6.04.0 8.0 10.0 12.0 14.0 16.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

1.0 2.0 3.0 4.0 6.05.0

3.8 (lpm) 7.6 11.4 15.1 18.9 22.7

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Cv~3.0

Cv~3.3

Cv~2.0

Cv~3.2

Kv=46.0

Kv=47.4 Kv=12.5

Kv=28.7

Kv=43.1

Kv=8.6

Cv~0.6

Cv~0.8

C

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 30.0 40.0 45.035.0 50.025.0

18.9(lpm) 37.9 56.8 75.7 94.6 113.6 132.5 151.4 170.3189.3

3.44

4.14

2.75

2.07

1.38

0.69 (bar)Cv~9.4

Cv~7.3Kv=104.9

CQND08 Double-sided

shut-offCQN08


Coupling Inserts

THREAD SIZE TERMINATION TYPE PART NO.3/8" NPT Female NPT Thread NSHD260063/8" BSPT Male BSPT Thread NSHD24006BSPT†1/2" NPT Male NPT Thread NSHD240083/4" NPT Male NPT Thread NSHD24012†


TUBING SIZE METRIC EQ. TERMINATION TYPE PART NO.3/8" OD 9.5mm OD Compression NSHD200061/2" OD 12.7mm OD Compression NSHD20008

In-LineCompression

TUBING SIZE METRIC EQ. TERMINATION TYPE PART NO.3/8" ID 9.5mm ID Hose Barb NSHD220061/2" ID 12.7mm ID Hose Barb NSHD220085/8" ID 15.9mm ID Hose Barb NSHD220103/4" ID 19.0mm ID Hose Barb NSHD22012

Hose Barb


Patent Protected

Panel mount NSH series coupling.



• Ink handling

• Chemical delivery systems

• Electronic cooling

• Instrumentation

• Medical devices

• Water treatment plants, carwashes, industrial laundry

NEW! NS6 Series Non-Spill Couplings Material: Polypropylene

Patent-pending NS6 Series couplings feature non-spill valves ina compact size, at a great price. Use the NS6 when even a fewdrops of spillage pose problems regarding safety, media cost orenvironmental regulations. These innovative couplings arelightweight, chemically-resistant and easy to use. The Non-Spilldesign virtually eliminates spills, minimizes downtime andenhances operator safety. Soft touch overmold makes themcomfortable in the hand and very attractive.

FEATURES BENEFITSNon-Spill design Disconnect under pressure with no spills

Color-coding Instant visual differentiation of media lines

Glass-filled Durable and compatible with many chemicalspolypropylene

Colder thumb latch One-hand connection and disconnection

TPV overmold Provides “soft touch” feel for excellent ergonomics


THREAD SIZE TERMINATION TYPE PART NO.1/2" NPT Male NPT Thread NS6D10008†1/2" BSPT Male BSPT Thread NS6D10008BSPT


TUBING SIZE METRIC EQ TERMINATION TYPE PART NO.1/2" OD 12.7mm OD Compression NS6D13008

Coupling Bodies

In-LineCompression

TUBING SIZE METRIC EQ TERMINATION TYPE PART NO.3/8" ID 9.5mm ID Hose Barb NS6D170061/2" ID 12.7mm ID Hose Barb NS6D17008

Hose Barb

NSGP

Patent Pending


NS6 Series SpecificationsMaterials:Main components: Glass-filled, polypropyleneThumb latch: Glass-filled, polypropyleneValve spring (wetted): 316 stainless steel

Optional: Hastelloy CExternal spring: 316 stainless steel

Optional: Hastelloy CO-rings: EPDM

Optional: FKMSoft touch overmold: TPV*

Color: Gray with dark gray overmold standard (gray with red or blue overmold available)


Spillage: ~0.03 cc/disconnect @ 0 psi, ~0.30 cc/disconnect @ 120 psi

Panel Mount: Integral; available on insert only

Keying System: Color-coding only (mechanical key not available)*The overmold material is known as TPV (thermoplastic vulcanizate). This TPV is an alloy of polypropylene thermoplastic and fully vulcanized EPDM rubber. The material is typically resistant to water, acids and bases.

TUBING SIZE METRIC EQ TERMINATION TYPE PART NO.1/2" OD 12.7mm OD Compression NS6D20008In-Line

Compression

TUBING SIZE METRIC EQ TERMINATION TYPE PART NO.1/2" OD 12.7mm OD Compression NS6D40008Panel Mount

Compression


Hose BarbPanel Hole 1-1/4" (31.8mm)



Coupling Inserts


Hose Barb

For accessories, see page 28. For dimensions, see page 31.†Indicates coupling that can be used with DrumQuik® (see pages 24-27); requires a 3/4" NPT to 1/2" NPT adaptor bushing for use withDrumQuik MODULAR.

ChemQuik® CQND06


F

0 20 40 60 80 100

C

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

160

140

120

100

80

60

40

20

0


F

0 20 40 60 80 100

C

-18(°C)

2

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0



Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

160

140

120

100

80

60

40

20

0

NSH Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

160

140

120

100

80

60

40

20

0

NS6 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

Flow Rate (gpm)

C

Pres

sure

Dro

p(p

s

0.00

10

20

30

40

5

2.0 4.0 6.0 8.0 10.0 12.0

2.75

2.07

1.38

0.69 (bar)

F

Flow Rate (gpm)

C

Pres

sure

Dro

p(p

0.00

10

20

30

40

5

5.0 10.0 15.0 20.0 25.0

1

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 4.0 6.0 8.0 12.0 16.0 18.014.010.0

7.6(lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6 68.1

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 6.04.0 8.0 10.0 12.0 14.0 16.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6

3

Cv

Cv

Cv~

Cv~1.6

Cv~2.2

K

Kv=23.0

Kv=31.6

F


NS4 Series Non-Spill Couplings Material: Polypropylene

Ideal for installations where space is at a premium, patentedNS4 Series couplings have the same great features as NS6couplings but in a more compact package, at a great price. Use the NS4 when even a few drops of spillage pose problemsregarding safety, media cost or environmental regulations.These innovative couplings are lightweight, chemically-resistantand easy to use. The Non-Spill design virtually eliminates spills,minimizes downtime and enhances operator safety. Applications may include:

• Ink handling

• Chemical delivery systems

• Electronic cooling

• Instrumentation

• Medical devices

• Lab uses

FEATURES BENEFITSNon-Spill design Disconnect under pressure with no spills

Color-coding Instant visual differentiation of media lines

Glass-filled Durable and compatible with many chemicalspolypropylene

Colder thumb latch One-hand connection and disconnection

TPV overmold Provides “soft touch” feel for excellent ergonomics

Patent Protected


NEW!

For accessories, see page 28. For dimensions, see page 31.*For 1/8" (3.2mm) ID tubing, maximum tube OD is 1/4" (6.4mm).‡Colder’s Ferruleless PTF (Polytube Fitting) terminations do not require ferrules to achieve a secure connection and are therefore easier to use and reuse. PTFfittings are designed for semi-rigid tubing, e.g., polyethylene, nylon, polyurethane, etc.

†Indicates coupling that can be used with DrumQuik® (see pages 24-27); requires a 3/8" NPT to 1/4" NPT adaptor bushing for use with DrumQuik UDA2-Port.



TUBING SIZE METRIC EQ TERMINATION TYPE PART NO.3/8" OD 1/4" ID 9.5mm OD 6.4mm ID Compression NS4D13006

Coupling Bodies

In-LineFerruless Polytube Fitting, PTF‡

TUBING SIZE METRIC EQ TERMINATION TYPE PART NO.1/8" ID* 3.2mm ID* Hose Barb NS4D170021/4" ID 6.4mm ID Hose Barb NS4D170043/8" ID 9.5mm ID Hose Barb NS4D17006

Hose Barb

NSGP

NS4 Series SpecificationsMaterials:Main components: Glass-filled, polypropyleneThumb latch: Glass-filled, polypropyleneValve spring (wetted): 316 stainless steel

Optional: Hastelloy C External spring: 316 stainless steel

Optional: Hastelloy CO-rings: EPDM

Optional: FKMSoft touch overmold: TPV*

Color: Gray with dark gray overmold standard (gray with red or blue overmold available)


Spillage: <0.10 cc/disconnect

Panel Mount: Integral; available on insert only

Keying System: Color-coding only (mechanical key not available)

*The overmold material is known as TPV (thermoplastic vulcanizate). This TPV is an alloy of polypropylene thermoplastic and fully vulcanized EPDM rubber. The material is typically resistant to water, acids and bases.


For accessories, see page 28. For dimensions, see page 31.*For 1/8" (3.2mm) ID tubing, maximum tube OD is 1/4" (6.4mm).‡Colder’s Ferruleless PTF (Polytube Fitting) terminations do not require ferrules to achieve a secure connection and are therefore easier to use and reuse. PTFfittings are designed for semi-rigid tubing, e.g., polyethylene, nylon, polyurethane, etc.

†Indicates coupling that can be used with DrumQuik® (see pages 24-27); requires a 3/8" NPT to 1/4" NPT adaptor bushing for use with DrumQuikUDA 2-Port.

TUBING SIZE METRIC EQ TERMINATION TYPE PART NO.3/8" OD 1/4" ID 9.5mm OD 6.4mm ID Compression NS4D20006In-Line

Ferruless Polytube Fitting, PTF‡

TUBING SIZE METRIC EQ TERMINATION TYPE PART NO. 1/8" ID* 3.2mm ID* Hose Barb NS4D220021/4" ID 6.4mm ID Hose Barb NS4D220043/8" ID 9.5mm ID Hose Barb NS4D22006

Hose Barb

TUBING SIZE METRIC EQ TERMINATION TYPE PART NO.1/8" ID* 3.2mm ID* Hose Barb NS4D420021/4" ID 6.4mm ID Hose Barb NS4D420043/8" ID 9.5mm ID Hose Barb NS4D42006

Hose BarbPanel Hole 15/16" (23.9mm)

TUBING SIZE METRIC EQ TERMINATION TYPE PART NO.3/8" OD 1/4" ID 9.5mm OD 6.4mm ID Compression NS4D40006Panel Mount

Ferruless Polytube Fitting, PTF‡



Coupling Inserts



Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0


F

.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

2


F

.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

2



Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0



Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

CQN08 Single-sided

shut-off



Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

NSH Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

NS4 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

NS6 Pressure Range


F

(bar) 3.45 5.17 6.89 8.62

25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

CQND08 Double-

sided shut-off

Flow Rate (gpm)


P

0.00

2.0 4.0 6.0 8.0 10.0 12.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


P

0.00

2.0 4.0 6.0 8.0 10.0 12.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

1.0 2.0 3.0 4.0 5.0

3.8 (lpm) 7.6 11.4 15.1 18.9

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


P

2.0 4.0 6.0 8.0 12.0 16.0 18.014.010.0

7 (lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6 68.1

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 6.04.0 8.0 10.0 12.0 14.0 16.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

1.0 2.0 3.0 4.0 6.05.0

3.8 (lpm) 7.6 11.4 15.1 18.9 22.7

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Cv~3.0

Cv~3.3

Cv~2.0

Cv~3.2

Kv=46.0

Kv=47.4 Kv=12.5

Kv=28.7

Kv=43.1

Kv=8.6

Cv~0.6

Cv~0.8

Cv~1.6

Cv~1.6

Cv~2.2

Kv=23.0

Kv=23.0

Kv=31.6

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 30.0 40.0 45.035.0 50.025.0

18.9(lpm) 37.9 56.8 75.7 94.6 113.6 132.5 151.4 170.3189.3

3.44

4.14

2.75

2.07

1.38

0.69 (bar)Cv~9.4

Cv~7.3Kv=104.9

CQND08 Double-sided

shut-offCQN08



HFC12 SeriesMaterial: Polypropylene

Patented HFC12 Series couplings have flow comparable to many1/2" nominal flow couplings in a 3/8" body size. Compact andlightweight, HFC couplings replace bulky and heavy brass ball-and-sleeve couplings in a wide range of applications. Anergonomic design and a large shrouded thumb latch pad producea coupling that is easy to grip and simple to operate. An efficientvalve design leads to high flow and low spillage.

20


• Photo processingchemicals

• Battery filling equipment

• Air mattress systems

• Spray equipment

• Antifreeze recycling

• Thermal management

FEATURES BENEFITSHigh efficiency valve More flow and less spillage in a compact size

Ergonomic design Easy to grip, simple to operate

Polypropylene material Chemically-resistant and gamma sterilizable

Colder compatible Mates with HFC35 and HFC57 couplings


Patent Protected


THREAD SIZE STRAIGHT THRU SHUTOFF3/8" NPT HFC10612 HFCD10612†3/8" BSPT HFC10612BSPT HFCD10612BSPT1/2" NPT HFC10812 HFCD108123/4" NPT HFC101212 HFCD101212†


TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF 3/8" ID 9.5mm ID HFC16612 HFCD166121/2" ID 12.7mm ID HFC16812 HFCD168125/8" ID 15.9mm ID HFC161012 HFCD1610123/4" ID 19.0mm ID HFC161212 HFCD161212

Bulkhead Panel MountHose BarbPanel Hole 1.21" (31mm)

TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF3/8" ID 9.5mm ID HFC17612 HFCD176121/2" ID 12.7mm ID HFC17812 HFCD178125/8" ID 15.9mm ID HFC171012 HFCD1710123/4" ID 19.0mm ID HFC171212 HFCD171212

In-LineHose Barb

TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF 3/8" OD 9.5mm OD HFC12612 HFCD126121/2" OD 12.7mm OD HFC12812 HFCD12812

Compression

TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF 3/8" OD 9.5mm OD HFC13612 HFCD136121/2" OD 12.7mm OD HFC13812 HFCD13812

Compression

GP

Coupling Bodies

HFC12 Series SpecificationsMaterials:Main components and valves: Virgin, gray polypropyleneThumb latch: Virgin, dark gray polypropyleneValve spring (wetted): 316 stainless steel

Optional: Hastelloy CExternal springs: 316 stainless steel

Optional: Hastelloy C O-rings: EPDM

Optional: FKM

Panel mount gasket: EPDMOptional: Hastelloy C

Lubricant: Silicone

Spillage: ~1.5 cc/disconnect

Panel Mount: Integral; available on body only

Keying System: Not available

WARNING: Pressure, temperature, chemicals, and operating environmentcan affect the performance of couplings. It is the customer’s responsibilityto test the suitability of Colder products in their own applicationconditions. Use the graphs below as a guide.

HFC couplings are used on liquid chillers to recirculatecooling fluids in laser, laboratory and medical products.



THREAD SIZE STRAIGHT THRU SHUTOFF3/8" NPT HFC24612 HFCD24612†3/8" BSPT HFC24612BSPT HFCD24612BSPT1/2" NPT HFC24812 HFCD248123/4" NPT HFC241212 HFCD241212†


Coupling Inserts

TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF3/8" ID 9.5mm ID HFC22612 HFCD226121/2" ID 12.7mm ID HFC22812 HFCD228125/8" ID 15.9mm ID HFC221012 HFCD2210123/4" ID 19.0mm ID HFC221212 HFCD221212

In-LineHose Barb

TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF3/8" OD 9.5mm OD HFC20612 HFCD206121/2" OD 12.7mm OD HFC20812 HFCD20812

Compression

TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF3/8" ID 9.5mm ID HFC23612 HFCD236121/2" ID 12.7mm ID HFC23812 HFCD23812

ElbowHose Barb



F


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0


F


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100


121

93.3

65.6

37.8

10.0

-18(°C)

250

200

150

100

50

0



Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

160

140

120

100

80

60

40

20

0



Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

160

140

120

100

80

60

40

20

0

CQN08 Single-sided

shut-off



Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

NSH Pressure Range

Fluid Pressure (psig)Fl

uid

Tem

pera

ture

(°F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0


F

NS6 Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

CQND08 Double-

sided shut-off

12.0

7

2.07

1.38

0.69 (bar)

F

ce

P

12.0

7 5.4

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)

C

Pres

sure

Dro

0.00

10

20

30

4

5.0 10.0 15.0 20.0 25.0

2.07

1.38

0.69 (bar)

Flow Rate (gpm)

N

Pres

sure

Dro

0.00

10

20

30

4

1.0 2.0 3.0 4.0 5.0

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 25.0

18.9 (lpm) 37.9 56.8 75.7 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

F0

1

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

2.0 6.04.0 8.0 10.0 12.0 14.0 16.0

7.6 (lpm) 15.1 22.7 30.3 37.9 45.4 53.0 60.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

1.0 2.0 3.0 4.0 6.05.0

3.8 (lpm) 7.6 11.4 15.1 18.9 22.7

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Cv~3.0

Cv~3.3

Cv~2.0

Cv~3.2

Kv=46.0

Kv=47.4 Kv=12.5

Kv=28.7

Kv=43.1

Kv=8.6

Cv~0.6

Cv~0.8

C

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 30.0 40.0 45.035.0 50.025.0

18.9(lpm) 37.9 56.8 75.7 94.6 113.6 132.5 151.4 170.3189.3

3.44

4.14

2.75

2.07

1.38

0.69 (bar)Cv~9.4

Cv~7.3Kv=104.9

CQND08 Double-sided

shut-offCQN08



EFC12 Series Material: Polypropylene

The EFC Series couplings feature a high efficiency valve designthat provides for a greater flow capability than any othercoupling its size. Chemically-resistant polypropylene materialmakes it ideal for harsh environments. The EFC Series adds abulkhead panel mount option for tight seals against tank wallsand drums.

22


• Soap dispensing

• Fume hoods

• Dry cleaning chemicals

• Battery filling equipment

• Package filling machinery

• Electronics water treatment

FEATURES BENEFITSHigh efficiency valve More flow in a compact size

Plastic thumb latch Fewer moving parts

Polypropylene material Chemically-resistant and gamma sterilizable

Colder compatible Mates with most APC couplings


THREAD SIZE METRIC EQ. SHUTOFF1/4" NPT EFCD10412†3/8" NPT EFCD10612†


TUBING SIZE METRIC EQ. SHUTOFF 1/4" ID 6.4mm ID EFCD164123/8" ID 9.5mm ID EFCD16612

Bulkhead Panel MountHose BarbPanel Hole 11/16" (18mm)

TUBING SIZE METRIC EQ. SHUTOFF 1/4" ID 6.4mm ID EFCD174123/8" ID 9.5mm ID EFCD17612

In-LineHose Barb

Coupling Bodies


GP

EFC12 Series SpecificationsMaterials:Main components and valves: Virgin, light gray polypropyleneThumb latch: Virgin, dark gray polypropyleneValve spring (wetted): 316 stainless steel External springs: 302 stainless steelO-rings: EPDMPanel mount gasket: EPDM

Lubricant: Silicone

Spillage: ~1.3 cc/disconnect

Panel Mount: Integral; available on body only

Keying System: Not available

EFC quick disconnect coupling simplifies chemicaldraining process.


THREAD SIZE SHUTOFF1/4" NPT EFCD24412†3/8" NPT EFCD24612†


Coupling Inserts

TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF 1/4" ID 6.4mm ID EFC22412 EFCD224123/8" ID 9.5mm ID EFC22612 EFCD22612

In-LineHose Barb

TUBING SIZE METRIC EQ. STRAIGHT THRU SHUTOFF 1/4" ID 6.4mm ID EFC23412 EFCD234123/8" ID 9.5mm ID EFC23612 EFCD23612

ElbowHose Barb




Flui

dTe

mpe

ratu

r0 20 40 60 80 100

C

37.8

26.7

15.6

4.4

-6.7(°C)

1

100

80

60

40

20

0


Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

0

65.6

37.8

10.0

-18(°C)

2

9

0

121

93.3

65.6

37.8

10.0

-18(°C)

2



Flui

dTe

mpe

ratu

re(°

F)1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0



Flui

dTe

mpe

ratu

re(°

F)

1.38 (bar) 2.76 4.14 5.52 6.89

0 20 40 60 80 100

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

CQN08 Single-sided

shut-off



Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0

NSH Pressure Range


Flui

dTe

mpe

ratu

re(°

F)

1.72 (bar) 3.45 5.17 6.89 8.62

0 25 50 75 100 125

71.1

60.0

48.9

37.8

26.7

15.6

4.4

-6.7(°C)

160

140

120

100

80

60

40

20

0


Flui

dTe

mpe

ratu

r

0 25 50 75 100 125

37.8

26.7

15.6

4.4

-6.7(°C)

1

100

80

60

40

20

0

1

0

9

8

7

6

7(°C)

CQND08 Double-

sided shut-off

ance

P

25.0

1 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

1.0 2.0 3.0 4.0 5.0

3.8 (lpm) 7.6 11.4 15.1 18.9

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

F

nce

P

25.0

1 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

F25.0

1 94.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

F

0 16.0

7 60.6

3.44

4.14

2.75

2.07

1.38

0.69 (bar)

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

1.0 2.0 3.0 4.0 6.05.0

3.8 (lpm) 7.6 11.4 15.1 18.9 22.7

3.44

4.14

2.75

2.07

1.38

0.69 (bar)Kv=12.5

K

Kv=8.6

Cv~0.6

Cv~0.8

C

Flow Rate (gpm)


Pres

sure

Dro

p(p

sid)

0.00

10

20

30

40

50

60

5.0 10.0 15.0 20.0 30.0 40.0 45.035.0 50.025.0

18.9(lpm) 37.9 56.8 75.7 94.6 113.6 132.5 151.4 170.3189.3

3.44

4.14

2.75

2.07

1.38

0.69 (bar)Cv~9.4

Cv~7.3Kv=104.9

CQND08 Double-sided

shut-offCQN08




DrumQuik® MODULAR Dispense SystemMaterial: Polypropylene and PTFE

The easy to use DrumQuik® MODULAR Dispense System combinesyour choice of ChemQuik® or General Purpose couplings with amodular dip-tube based system for the extraction of aggressive or ultra-pure chemicals from drums and IBCs. This extremely durable andreliable two-port, closed system increases operator safety and reducesdowntime by virtually eliminating dangerous spills and fumes.


• Bio/Pharm CIP chemicals

• Micro-electronic highpurity chemicals

• Industrial chemicals usedin water treatment, carwash, laundry, and more

FEATURES BENEFITSModular design Provides flexibility in system configuration

Two-port system Eliminates fumes and allows N2 ports and recirculation

Standard threads Fits common drum bungs (2" buttress,BCS 56x4, etc.)

DESCRIPTION PART NO.Bung, polypropylene, 3/4” NPT liquid port, 3/8” NPT vent, 2” buttress DQM D2PP 2BUT (coarse thread, U.S. standard)Bung, polypropylene, 3/4" NPT liquid port, 3/8” NPT vent, 2" NPS DQM DI2PP 2NPS (fine thread, U.S. standard)Bung, polypropylene, 3/4" NPT liquid port, 3/8” NPT vent, BCS 56x4 DQM DI2PP 56X4 (European standard)

Bung, PTFE, 3/4” NPT liquid port, 3/8” NPT vent, 2” buttress DQM DI2PTFE 2BUT (coarse thread, U.S. standard)Bung, PTFE, 3/4" NPT liquid port, 3/8" NPT vent, 2" NPS DQM DI2PTFE 2NPS (fine thread, U.S. standard)

Bung, PTFE, 3/4" NPT liquid port, 3/8” NPT vent, BCS 56x4 DQM DI2PTFE 56X4 (European standard)

Standard ProductsDrum Inserts

DESCRIPTION PART NO.Dip-tube, polypropylene, 35.3” (897mm) long from sealing surface DQM DTUBE PP35Dip-tube, polypropylene, 55” (1397mm) long from sealing surface DQM DTUBE PP55

Dip-tube, PTFE, 35.3” (897mm) long from sealing surface DQM DTUBE PTFE35Dip-tube, PTFE, 55” (1397mm) long from sealing surface DQM DTUBE PTFE55

Dip-Tubes

DESCRIPTION PART NO.Hex pipe plug, 3/8” NPT, PFA material DQM PLUG PFA06Hex pipe plug, 3/8” NPT, PFA material DQM PLUG PFA12

Pipe Plugs

DESCRIPTION PART NO.Complete seal kit FEP Encapsulated Viton® FKM DQM SKIT FEPVITON

(includes liquid port and bung seals)Replacement Seal Kit for DQM

DESCRIPTION PART NO.For DrumQuik vent port (see page 27) DQM CK PVDF0206Vent Check Valve (VCV)

DESCRIPTION PART NO.Mount downstream of liquid coupling (see page 27) DQM CK PFA0308Back Flow Check Valve (BCV)

DESCRIPTION PART NO.Mount at bottom of dip tube (see page 27) DQM FV PP0204 (for PTFE dip-tubes)

DQM FV PP0208 (for polypropylene dip-tubes)Foot Valve

DrumQuik Specifications (will vary based on couplings and container selected)

Materials:Main Components: Natural, virgin PTFE or polypropyleneDip-Tube Seal: FEP Encapsulated Viton® FKM*Vent Check Valve: PVDF with Hastelloy C spring, Viton® seal*Back Flow Check Valve: PFA, Kalrez® sealSeals: FEP Encapsulated Viton® – included with Drum InsertLubricants: None usedCoupling Components: Dependent on coupling (see coupling product pages for specifications)

Construction Type: Modular drum insert bung and dip-tube

Number of Ports: Two; one 3/4” female NPT liquid port and one3/8” female NPT vent port (with backup seals included in seal kit)

Drum Thread: Industry standard 2” buttress, 2” NPS and BCS 56x4 (European standard) – others available by special order;contact factory

Dip-Tube Length: 35.3” (897mm) or 55” (1397mm) (measuredfrom sealing surface, may be trimmed to fit special container)

Pressure: 0 to 45 psig (0 to 3.1 bar)

Temperature: 0° to 150° F (-17 to 65° C), polypropylene limitedto 32° F (0° C)

*NOTE: Some applications require the use of a back flow check valve (BCV)which prevents reverse flow when suction pump is turned off. Colderrecommends that the BCV be installed immediately downstream from theliquid line coupling body. Similarly, to allow air into drum, but preventfumes from escaping, install a vent check valve (VCV) in vent port. ContactColder’s factory for assistance, also see page 27.

For DrumQuik accessories, see page 27.

HPGP

NEW!

See red part numbers throughout catalog for couplings that are DQ compatible


CHEMQUIK VENT LINE COUPLING INSERT:Select an HFC12, CQH06 or CQV06 Seriesinsert with a 3/8” male NPT termination. NOTE: A PVDF check valve (VCV) is alsoavailable to contain fumes and vent drum.(see page 27)

DRUMQUIK DRUM INSERTIncludes two FEP Encapsulated Viton® seals.

CHEMQUIK VENT LINE COUPLING BODY:Select any HFC12, CQH06 or CQV06 Series body based on desiredtype, size and termination.

CHEMQUIK LIQUID LINECOUPLING BODY:Select any NSH, CQG06, CQN06 orCQN08 Series body based ondesired type, size and termination.

BACK FLOW CHECK VALVE (BCV):A check valve (BCV) is available to preventloss of prime at pump. Mount downstreamof liquid line body. (see page 27)

CHEMQUIK LIQUID LINECOUPLING INSERT:Select an NSH, CQG06, CQN06or CQN08 Series insert with a3/4” male NPT termination.

DRUMQUIK SEALSTwo included with Drum Insert.

DRUMQUIKDIP-TUBEThreaded into druminsert – seal is included.

DRUM BUNG THREAD2”buttress, 2” NPS andBCS 56x4 are standard.

*DIP-TUBE SEALComes assembled.

FOOT VALVE

DIP-TUBE LENGTHMeasured from seal surface of drum insertto bottom of dip tube.

DrumQuik® MODULAR ConfigurationDrumQuik® dip-tubes and mating ChemQuik® or General Purpose couplings provide the ultimatesystem for extracting chemicals from drums and larger IBC/tote containers.

Any standard Colder ChemQuik, NSH or HFC12 Series coupling set (or even common fittings) can beused with the DrumQuik system to provide instant, safe and reliable connections of chemical lines torigid containers. Simply thread the coupling(s) into DrumQuik drum insert to provide the systemconnection. Then, thread in a DrumQuik dip-tube of proper length for a perfect match to your drum orIBC/tote. Insert the assembly into the container and your system is complete.

WARNING: Always check forchemical compatibility of allDrumQuik and couplingcomponents for suitability in aspecific application prior to use.

*NOTE: Be sure that seal is installed on dip-tube before assembling dip-tube with drum insert.


DrumQuik MODULARDispense System(with quick disconnect)Shown with CQN08 liquid and CQH06 vent line couplings.

NEW!


Press together to assemble.

Dip-Tube BushingCoupling Insert Coupling Body

DrumQuik DQ UDA Drum Adaptor KitThe DrumQuik® DQ UDA kit turns any ChemQuik® or General Purpose (HFC or NSH)coupling into a dip-tube that can easily be threaded into the 3/4" female NPS port ofcommon drum closures. It provides a simple and inexpensive way to dispensechemicals in pumped systems. For your convenience, Colder offers a variety of drum adaptor plugs to facilitate easy drum connections, see page 27.

DrumQuik DQ UDA 2-Port Drum Adaptor KitLike the DQ UDA, the DQ UDA 2-port system is intended to thread into the 3/4 female NPS port of common drums, 5 gallon (20 liter) pails or even Nalgene®

bottle closures. However, it features 2-ports; a 3/8 female NPT liquid port thatconnects to the dip-tube (included), and a 1/4 female NPT vent port.For your convenience, Colder offers a variety of drum adaptor plugs to facilitate easy drum connections, see page 27.

PART NO. DESCRIPTIONDQ UDAKIT PP35 Kit for 55 gal drum (approx 35.5" (902mm) dip-tube, trim to length), polypropylene DQ UDAKIT PP55 Kit for IBC (approx 55.5" (1410mm) dip-tube, trim to length), polypropylene

Use above kits with HFC, NSH, CQG06, and CQH06 Series couplings.

DQ UDAKIT PTFE35 Kit for 55 gal drum (approx 35.5" (902mm) dip-tube, trim to length), PTFE DQ UDAKIT PTFE55 Kit for IBC (approx 55.5" (1410mm) dip-tube, trim to length), PTFE

Use above kits with CQN Series couplings.

NOTE: The DQ UDA kits are designed to only work with Colder couplings that have 3/4" NPT male terminations. The DQ UDA 2-Port kits are designed to workwith a 3/8" NPT male on the liquid port and a 1/4" NPT male on the vent port. A 3/8" male NPT to 1/4" female NPT reducer bushing may be required toaccommodate smaller NS4, PLC and PMC Series couplings. BottleQuik features two 3/8 female NPT ports.

DrumQuik®

Universal Drum Adaptors

Universal Drum Adaptor Kit.

PART NO. DESCRIPTIONDQ UDA2PKIT PP 2-port adaptor, polypropylene with FKM seal (approx 35.5" (902mm) dip-tube, trim to length)

(3/8" female NPT liquid port, 1/4" female NPT vent port)DQ UDA2P NALNUT Adaptor nut to secure to Nalgene® cap, polypropylene

(A 1-1/8" (28.5mm) hole must be punched in top of Nalgene cap to allow adaptor to be inserted. Seal to go on outside, not inside of cap.)

Universal 2-Port Drum Adaptor Kit.

PART NO. DESCRIPTIONDQ UDACAP2PKIT PP 2-port adaptor for bottles with SP400-38mm threads

(3/8" female NPT liquid port, 3/8" female NPT vent port)

BottleQuik UBA 2-Port Bottle Adaptor Kit.

BottleQuik UBA 2-Port Bottle Adaptor KitThe BottleQuik is very similar to the DQ UDA 2-port, but is intended for useon reagent bottles with SP400-38mm threads. It can be used in either theupright position or inverted and for this reason has two 3/8 female NPT portsfor liquid and vent ports.

NEW!

NEW!



DrumQuik® Accessories

27

PART NO. DESCRIPTIONDQM CK PVDF 0204 PVDF, Hastelloy C spring, Viton® FKM seal (1/4" male NPT inlet and outlet)

Use with DQM PTFE dip-tube part number DQM DTUBE PTFE35 & 55: Mount at bottom of dip-tube, seal with “Teflon” tape.

DQM CK PVDF 0206 PVDF, Hastelloy C spring, PTFE ball, Viton® FKM seal (3/8" male NPT inlet and outlet)DQM CK PVDF 0208 PVDF, Hastelloy C spring, Viton® FKM seal (1/2" male NPT inlet and outlet)

Use with DQM polypropylene dip-tube part number DQM DTUBE PP35 & 55: Mount at bottom of dip-tube, must tap dip-tube first, seal with “Teflon” tape.

DQM CK PFA 0308‡ High purity PFA, Kalrez® FFKM seal (1/2" female NPT inlet and outlet)DQM FV PP0204 For PTFE dip-tubes – mount at bottom of dip-tubeDQM FV PP0208 For polypropylene dip-tubes – mount at bottom of dip-tubeDQM FV PP0708 For UDA Kit dip-tubes.

Use with all DQ UDA & BottleQuik dip-tubes: Mount at bottom of dip-tube with integral compression fitting.

DrumQuik® Asian Drum AdaptorsThe DrumQuik® Asian Drum Adaptors are bushings that allow any ChemQuik® or General Purpose (HFC or NSH)coupling to easily be connected to the unique threadscommon in many drum closures (with integral dip-tubes)manufactured in Asia, e.g., Kodama, Accelo, Stella, Dung Woo,etc. A 3/4" female NPT inner thread can accept any couplingor fitting with a 3/4" male NPT termination.

DrumQuik Check Valves and Foot ValvesThe DrumQuik check valves and foot valves are intended for use withDrumQuik MODULAR Dispense Systems. Check valves can be used as avent check valve (VCV), which allows make-up air into the drum whenliquid is removed, but will prevent fumes from escaping. They can alsobe used as a back flow check valve (BCV), which will prevent the pumpfrom losing its prime during extended periods of inactivity. New footvalves serve the same function as the BCV, with the added benefit ofpreventing fluid loss from the bottom of the dip-tube during transfer from drum to drum.

PART NO. DESCRIPTIONDQ ADA PP 0212 Type A Adaptor; polypropylene, with Viton® FKM seals DQ ADA PP 0622 Type B Adaptor; polypropylene, with Viton® FKM seals

Check Valve(PVDF)

Foot Valve

Foot Valve

PART NO. DESCRIPTIONDQM BUNGPP 2BUT12 Bung closure, poly, 2" buttress x 3/4" female NPSDQM BUNGPP 2NPS12 Bung closure, poly, 2" NPS x 3/4" female NPSDQM BUNGPP 56X412 Bung closure, poly, BCS56 x 4, 3/4" female NPS

DQM CAPPP 70mm Cap closure, poly, 70mm, 3/4" female NPS

DrumQuik Universal Drum Adaptor Bung PlugsFor your convenience, Colder offers several sizes of common drum bungplugs that have the internal 3/4" female NPS thread, into which theDrumQuik Universal Drum Adaptors/ChemQuik® couplings are threaded.

Couplings can be adaptedto a wide range of closures.

Type AFor use with closure plugs

with a 3/4" NPS center port.

Type BFor use with closure plugs witha 1-3/8" buttress center port.

3/4" NPT inner portincorporates a face seal to

assure a leak-free connection.NOTE: Other materials possible; contact factory for quote and lead time.

‡NOTE: Special order; contact factory for availability.

NEW!



PART NO. DESCRIPTION PANEL HOLE DIAMETER (MINIMUM)CQ DCNUT 0408 Dual Containment Flare Nut:

1/4 OD Process line x 1/2 OD secondary line N/A

CQ DCNUT 0612 DC Flare Nut: 3/8 x 3/4 N/ACQ DCNUT0812 DC Flare Nut: 1/2 x 3/4 N/ACQ DCNUT1216 DC Flare Nut: 3/4 x 1 N/A

CQ PM DCNUT 0408 Panel Mount DC Flare Fitting: 1/4 x 1/2 0.75” (19.05mm)CQ PM DCNUT 0612 Panel Mount DC Flare Fitting: 3/8 x 3/4 1.00” (25.4mm)CQ PM DCNUT 0812 Panel Mount DC Flare Fitting: 1/2 x 3/4 1.00” (25.4mm)CQ PM DCNUT 1216 Panel Mount DC Flare Fitting: 3/4 x 1 1.44” (36.5mm)

WEEP PORTVents area between primary and secondary

line so that pressure does not build up.Allows detection of possible leaks.

PROCESS LINE

PANEL MOUNTO-RING

DUAL CONTAINMENTPANEL MOUNT FITTING

DUAL CONTAINMENT NUT

Connect to ChemQuikcoupling or any flare fitting. SECONDARY

FLARE NUTS

ChemQuik Dual Containment Flare Nutsand Panel Mount Fittings

(compatible with standard flare style fittings)

PANEL

For accessories, see page 28. For dimensions, see page 31.

Coupling AccessoriesChemQuik® Dual Containment SystemThe ChemQuik® Dual Containment System is an easy way to ‘double contain’critical chemical lines, protecting plant and personnel in case a primary processline ruptures or ‘sweats.’ The system provides a protective secondary line tocatch any fluid and routes it to a safe location.

These fittings work with any ChemQuik coupling with fine thread flare terminations or a common flarestyle fitting. In addition, the panel mount version can be mounted into a pump cabinet or other panelmount connection point. The primary line can then be routed from the coupling directly to a pump,connected to a ChemQuik coupling or to a fitting at the panel mount fitting.

The “weep port” serves to vent the area between the primary and secondary lines so that pressure cannotbuild up in case of a primary line rupture. The leaking fluid can then be routed to a containment vesselor to a leak detector.

HP

Materials:

Dual containment nut and panel mount fitting: Virgin,natural polypropyleneFlare nuts and panel nuts: PVDFPanel mount o-rings: Viton® FKM

NOTE: Other materials possible; contact factory for quote and lead time.

NOTE: An FEP or PFA corrugated tubing material iscommonly used for the secondary line. These are availablethrough Colder as special order items. Please contactfactory for assistance.

SECONDARY LINE

Line can continuethrough to pump or

terminate in a couplingor fitting with flare

terminations.

PANEL NUT



CQG06CQN06

CQN08 NSH

PART NO. DESCRIPTION MATERIALS COUPLING USED WITHCQG06 DC01 Dust Cap HDPE CQG06CQHV06 DC01 Dust Cap HDPE CQH06 & CQV06CQN06 DC01 Dust Cap HDPE CQN06CQN08 DC01 Dust Cap HDPE CQN08CQG06 DP01 Dust Plug HDPE CQG06

CQG06 DP01 Keyed Dust Plug HDPE Keyed version of CQG06CQHV06 DP01 Dust Plug HDPE CQH06 & CQV06CQN06 DP01 Dust Plug HDPE CQN06

CQN06 DP01 Keyed Dust Plug HDPE Keyed version of CQN06CQN08 DP01 Dust Plug HDPE CQN08

CQN08 DP01 Keyed Dust Plug HDPE Keyed version of CQN08HFC 312L (with leash) Dust Plug/Cap Vinyl HFC12/CQH06/CQV06

NOTE: Dust caps are not pressure tight.

PART NO. DESCRIPTION MATERIALS COUPLING USED WITH**CQN06 PMKIT01 Panel Mount Adaptor HDPE with Viton Seals CQN06 & CQG06CQN08 PMKIT01 Panel Mount Adaptor PTFE with Viton Seal, ECTFE Screws CQN08

NSH PMKIT12 Panel Mount Adaptor Gray HDPE with EPDM Seal NSH

**NOTE: The CQN06 PMKIT comes with 2 spacers. Use one or both, depending on panel thickness (range is from 1/8"/3.2mm to 1/2"/12.7mm) toassure maximum holding force of panel mount adaptor on coupling.

Dust Caps and PlugsDust caps and plugs will protect disconnected couplingsfrom dirt or physical damage.

Panel Mount AdaptorsPanel mount adaptors work with coupling series that do not offer integrally-molded panel mountversions. The CQN06 and NSH adaptors are unique in that they can be “snapped” on to either thecoupling body or insert by engaging the internal “fingers” of the adaptor into the grooves located onboth the body and insert, resulting in exceptional flexibility for system configuration.

ø 2.000(50.8mm)HOLE MIN

MAX PANEL THICKNESS = 1/2" (12.7mm)

MAX PANEL THICKNESS = 1/2" (12.7mm)

ø 2.000(50.8mm)HOLE MIN

2.0005/16 – 18UNC

2.000

ø 2.015(51.2mm)

HOLEMIN


NSH


ChemQuik PVDF Color-Coded Flare NutsChemQuik color-coded flare nuts are sold individually foruse with any ChemQuik coupling or flare fitting commonlyused with Teflon® PFA or FEP tubing. An ideal way to codeany critical chemical line. Colored flare nuts are stock items.

How to order: Part numbering for color-coded CQH06 orCQV06 product: CQVD06 10 0106 XXX YY (YY color code). Ifpart is to include modified options, use the part number suffix“XXX” from modified product options section of the ChemQuik®

Price List before the color coding suffix “YY” as indicated to theright. Both thumb latch and flare nut are colored.

PART NO. “YY” COLOR CODE COLORCQVD06 10 0106 XXX YY 01 RED

(EXAMPLE) 02 YELLOW03 GREEN04 BROWN05 BLUE99 BLACK

PART NO, DESCRIPTION “YYY” COLOR CODECQ FNUT 04 YYY 1/4” OD tube size flare nut NAT, RED, GRN, BLU, EL, BRN, BLKCQ FNUT 06 YYY 3/8” OD tube size flare nut NAT, RED, GRN, BLU, EL, BRN, BLKCQ FNUT 08 YYY 1/2” OD tube size flare nut NAT, RED, GRN, BLU, YEL, BRN, BLKCQ FNUT 12 YYY 3/4” OD tube size flare nut NAT, RED, GRN, BLU, YEL, BRN, BLK

How to order: Part numbering forcolor-coded nuts: CQH FNUT 06 YYY(3 character color code, e.g., “GRN”for green).

CQH06 with color options.

Physical Keying/Color-Coding Options for theChemQuik CQG06, CQN06 and CQN08 SeriesCQG06 and CQN couplings available with non-interchangeablephysical/mechanical keys and color-coding. Keyed couplings aremodified standard parts and are built to order. Consult factory forlead time.

How to order: Part numbering for keyed CQN or CQG06product: CQN06 10 0106 XXX YY (YY color code). If part isto include modified options, use the part number suffix“XXX” from modified product options section of theChemQuik Price List before the color coding suffix “YY” asindicated to the right.

NOTE: CQG06 is available in 01Red and 05Blue only.

PART NO. “YY” KEY CODE COLORCQN06 10 0106 XXX YY 01 RED

(EXAMPLE) 02 YELLOW03 GREEN04 BROWN05 BLUE99 BLACK

06-98 WHITE

30

Color-coded flare nuts.

Color-Coding Options for the ChemQuik®

CQH06 and CQV06 SeriesCQH06 and CQV06 only available with color-coding; physicalkeys not available. Color-coded couplings are modified standardparts and are built to order. Consult factory for lead time.

CQN08 with panel mount adaptor and color-coding.


CQG06 In-Line Bodies

PRODUCT A B C

CQGD06 10 0106 4.32 Ø1.90 1.96CQGD06 10 0108 4.32 Ø1.90 1.96CQGD06 10 0112 4.49 Ø1.90 1.96CQGD06 10 0208 3.81 Ø1.90 1.96

Part DimensionsDimensions are approximate. Drawings show only one termination, however, part numbers and dimensions are listed accurately for all terminations.For exact data please visit our web site and obtain downloadable drawings.

CQG06 In-Line Inserts

PRODUCT A B C

CQGD06 20 0106 4.46 3.14 Ø1.62CQGD06 20 0108 4.46 3.14 Ø1.62CQGD06 20 0112 4.64 3.32 Ø1.62CQGD06 20 0208 3.96 2.64 Ø1.62CQGD06 20 0212 4.16 2.84 Ø1.62

CQG06 In-Line Insertswith Panel Mount AdaptorInstalled

PRODUCT A B C D E F G

CQGD06 20 0106 2.39 0.50 2.07 Ø2.00 Ø2.50 2.58 1.88CQGD06 20 0108 2.39 0.50 2.07 Ø2.00 Ø2.50 2.58 1.88CQGD06 20 0112 2.57 0.50 2.07 Ø2.00 Ø2.50 2.58 2.06CQGD06 20 0208 1.89 0.50 2.07 Ø2.00 Ø2.50 2.58 1.38CQGD06 20 0212 2.09 0.50 2.07 Ø2.00 Ø2.50 2.58 1.58

CQG06 In-Line Bodieswith Panel Mount AdaptorInstalled

PRODUCT A B C D

CQGD06 10 0106 2.47 0.50 1.85 Ø2.00CQGD06 10 0108 2.42 0.50 1.85 Ø2.00CQGD06 10 0112 2.64 0.50 1.85 Ø2.00CQGD06 10 0208 1.96 0.50 1.85 Ø2.00

CQH/CQV In-Line Bodies

PRODUCT A B C

06 10 0104 3.32 1.44 1.3606 10 0106 3.38 1.44 1.3606 10 0108 3.38 1.44 1.3606 10 0206 2.70 1.44 1.36

CQH/CQVPanel MountBodies

PRODUCT A B C D E

06 11 0104 3.32 1.15 1.44 1.36 1.8206 11 0106 3.38 1.15 1.44 1.36 1.8206 11 0108 3.38 1.15 1.44 1.36 1.8206 11 0206 2.70 1.15 1.44 1.36 1.82

B

AC

A

B

C

A

C

B

AC

B

A

B

B

CA FG

E

panel holeD

panel hole

panel thickness max

connected length

D

panel thickness max

back mounted front mounted

D

E

panel thickness max = 0.25" (6.4mm) panel hole = Ø1.121" (31mm)

C


Part Dimensions (continued)

CQN06 In-Line Bodies

PRODUCT A B C

CQND06 10 0104 3.99 1.72 1.98CQND06 10 0106 4.09 1.72 1.98CQND06 10 0108 4.19 1.72 1.98CQND06 10 0112 4.35 1.72 1.98CQND06 10 0308 3.71 1.72 1.98

CQN06 In-Line Bodieswith Panel Mount AdaptorInstalled


CQND06 10 0104 2.02 1.97 .50 Ø2.00 Ø2.44 Ø2.50 1.72CQND06 10 0106 2.12 1.97 .50 Ø2.00 Ø2.44 Ø2.50 1.72CQND06 10 0108 2.22 1.97 .50 Ø2.00 Ø2.44 Ø2.50 1.72CQND06 10 0112 2.38 1.97 .50 Ø2.00 Ø2.44 Ø2.50 1.72CQND06 10 0308 1.74 1.97 .50 Ø2.00 Ø2.44 Ø2.50 1.72

B

C

G

F

BA

CE

panel holerequired

A

CQH/CQV In-Line Inserts

PRODUCT A B C

06 20 0104 2.39 1.47 Ø1.0006 20 0106 2.45 1.53 Ø1.0006 20 0108 2.44 1.52 Ø1.0006 20 0206 1.77 .85 Ø1.00

A

B

CQN06 In-Line Inserts

PRODUCT A B C

CQND06 20 0104 4.39 3.14 Ø1.63CQND06 20 0106 4.49 3.24 Ø1.63CQND06 20 0108 4.58 3.33 Ø1.63CQND06 20 0112 4.74 3.49 Ø1.63CQND06 20 0308 4.11 2.86 Ø1.63

CQN06 In-Line Inserts with Panel Mount AdaptorInstalled

PRODUCT A B C D E F G H

CQND06 20 0104 2.08 .50 2.37 Ø2.00 Ø2.44 1.44 2.95 3.14CQND06 20 0106 2.12 .50 2.37 Ø2.00 Ø2.44 1.54 2.95 3.24CQND06 20 0108 2.21 .50 2.37 Ø2.00 Ø2.44 1.63 2.95 3.35CQND06 20 0112 2.37 .50 2.37 Ø2.00 Ø2.44 1.79 2.95 3.49CQND06 20 0308 1.74 .50 2.37 Ø2.00 Ø2.44 1.16 2.95 2.86

C

A

B

AB FGC

panel hole required

C

D

connected length

DE

connected length

E

connected length

panelthicknessmax

panelthicknessmax

back mountedfront mounted

B


CQN08 In-Line Inserts

PRODUCT A B C D

CQND08 20 0112 5.89 2.87 Ø2.00 4.13CQND08 20 0116 6.09 2.87 Ø2.00 4.33CQND08 20 0212 5.33 2.87 Ø2.00 3.57CQND08 20 0312 5.33 2.87 Ø2.00 3.57

PRODUCT A B C

NSHD10006BSPT 3.67 1.96 Ø1.90NSHD10008 3.81 1.96 Ø1.90NSHD13006 3.97 1.96 Ø1.90NSHD13008 4.27 1.96 Ø1.90NSHD17006 3.73 1.96 Ø1.90NSHD17008 3.73 1.96 Ø1.90NSHD17012 3.88 1.96 Ø1.90NSHD19006 3.70 1.96 Ø1.90

CQN08 In-Line Bodies

PRODUCT A B C

CQND08 10 0112 5.47 2.06 2.41CQND08 10 0116 5.68 2.06 2.41CQND08 10 0212 4.93 2.06 2.41CQND08 10 0312 4.81 2.06 2.41

B

C

A

AD

C

NSHIn-Line Bodies

A

B

33

to panel mountflange

C

B

connected length

NSHIn-Line Bodieswith PanelMount AdaptorInstalled

PRODUCT A B C D E

NSHD10006BSPT 1.85 Ø2.50 2.44 Ø1.98 .50NSHD10008 1.85 Ø2.50 2.44 Ø1.98 .50NSHD13006 1.85 Ø2.50 2.44 Ø1.98 .50NSHD13008 1.85 Ø2.50 2.44 Ø1.98 .50NSHD17006 1.85 Ø2.50 2.44 Ø1.98 .50NSHD17008 1.85 Ø2.50 2.44 Ø1.98 .50NSHD17012 1.85 Ø2.50 2.44 Ø1.98 .50NSHD19006 1.85 Ø2.50 2.44 Ø1.98 .50

PRODUCT A B C

NSHD20006 4.14 2.81 Ø1.63NSHD20008 4.43 3.10 Ø1.63NSHD22006 3.90 2.57 Ø1.63NSHD22008 3.90 2.57 Ø1.63NSHD22012 4.05 2.72 Ø1.63

NSHD24006BSPT 3.84 3.84 Ø1.63NSHD24008 3.98 2.65 Ø1.63NSHD24012 4.18 2.85 Ø1.63NSHD26006 3.90 2.57 Ø1.63

NSH In-Line Inserts

A

B

C

connected length

2.00

C

panelthicknessmax

A

E

panel hole

B

D


NS6 In-Line Bodies

PRODUCT A B C

NS6D10008 3.00 1.39 Ø1.31NS6D10008BSPT 3.00 1.39 Ø1.31

NS6D13008 3.59 1.39 Ø1.31NS6D17006 3.16 1.39 Ø1.31NS6D17008 3.16 1.39 Ø1.31

A

B

NS6In-Line Inserts

PRODUCT A B C

NS6D20008 3.02 1.78 Ø1.31NS6D22006 2.59 1.35 Ø1.31NS6D22008 2.59 1.35 Ø1.31NS6D24008 2.44 1.20 Ø1.31

NS6D24008BSPT 2.44 1.20 Ø1.31

A

B

NS6Panel MountInserts

PRODUCT A B C D E

NS6D40008 3.28 1.40 Ø1.50 .33 Ø1.25NS6D42006 2.85 1.40 Ø1.50 .33 Ø1.25NS6D42008 2.85 1.40 Ø1.50 .33 Ø1.25


C

C

connectedlength

C

B

A

E panel hole

D

panel thickness max

NS4 In-Line Bodies

PRODUCT A B C

NS4D10004 2.31 1.05 Ø.96NS4D10004BSPT 2.29 1.05 Ø.96

NS4D13006 2.45 1.05 Ø.96NS4D17002 2.09 1.05 Ø.96NS4D17004 2.34 1.05 Ø.96NS4D17006 2.34 1.05 Ø.96

A

B

C

NSH Insertswith PanelMount AdaptorBack Mounted

NSH Insertswith Panel Mount AdaptorFront Mounted

PRODUCT A B C D E

NSHD20006 2.60 Ø2.50 2.44 Ø1.98 .50NSHD20008 2.60 Ø2.50 2.44 Ø1.98 .50NSHD22006 2.60 Ø2.50 2.44 Ø1.98 .50NSHD22008 2.60 Ø2.50 2.44 Ø1.98 .50NSHD22012 2.60 Ø2.50 2.44 Ø1.98 .50

NSHD24006BSPT 2.60 Ø2.50 2.44 Ø1.98 .50NSHD24008 2.60 Ø2.50 2.44 Ø1.98 .50NSHD24012 2.60 Ø2.50 2.44 Ø1.98 .50NSHD26006 2.60 Ø2.50 2.44 Ø1.98 .50

PRODUCT A B C D E

NSHD20006 2.02 Ø2.50 2.44 Ø1.98 .50NSHD20008 2.02 Ø2.50 2.44 Ø1.98 .50NSHD22006 2.02 Ø2.50 2.44 Ø1.98 .50NSHD22008 2.02 Ø2.50 2.44 Ø1.98 .50NSHD22012 2.02 Ø2.50 2.44 Ø1.98 .50

NSHD24006BSPT 2.02 Ø2.50 2.44 Ø1.98 .50NSHD24008 2.02 Ø2.50 2.44 Ø1.98 .50NSHD24012 2.02 Ø2.50 2.44 Ø1.98 .50NSHD26006 2.02 Ø2.50 2.44 Ø1.98 .50

CA

panel holeD

maxE

CA

D

Emax

panel hole

B

B


NS4In-Line Inserts

PRODUCT A B C

NS4D20006 2.09 1.24 Ø.96NS4D22002 1.73 0.88 Ø.96NS4D22004 1.98 1.13 Ø.96NS4D22006 1.98 1.13 Ø.96NS4D24004 1.95 1.10 Ø.96

NS4D24004BSPT 1.93 1.08 Ø.96

A

B

C

NS4 Panel MountInserts

PRODUCT A B C D E

NS4D40006 2.43 1.00 Ø1.17 .33 Ø15/16NS4D42002 2.07 1.00 Ø1.17 .33 Ø15/16NS4D42004 2.32 1.00 Ø1.17 .33 Ø15/16NS4D42006 2.32 1.00 Ø1.17 .33 Ø15/16

C

A

D

E

Bpanelthicknessmax

panel hole

HFCIn-Line Bodies

PRODUCT A B C D

HFC10612/HFCD10612 2.70 1.44 1.36 1.00HFC10612BSPT/HFCD10612BSPT 2.74 1.44 1.36 1.00

HFC10812/HFCD10812 2.88 1.44 1.36 1.00HFC101212/HFCD101212 3.08 1.44 1.36 1.05HFC13612/HFCD13612 3.04 1.44 1.36HFC13812/HFCD13812 3.33 1.44 1.36HFC17612/HFCD17612 2.79 1.44 1.36HFC17812/HFCD17812 2.79 1.44 1.36

HFC171012/HFCD171012 2.94 1.44 1.36HFC171212/HFCD171212 2.94 1.44 1.36

A

B

D

C

HFCPanel MountBodies

A

CE

D Gpanel hole

FB panel thickness max


HFC12612/HFCD12612 3.05 1.15 1.44 1.36 1.82 .25 Ø1.21HFC12812/HFCD12812 3.36 1.15 1.44 1.36 1.82 .25 Ø1.21HFC16612/HFCD16612 2.82 1.15 1.44 1.36 1.82 .25 Ø1.21HFC16812/HFCD16812 2.82 1.15 1.44 1.36 1.82 .25 Ø1.21

HFC161012/HFCD161012 2.97 1.15 1.44 1.36 1.82 .25 Ø1.21HFC161212/HFCD161212 2.97 1.15 1.44 1.36 1.82 .25 Ø1.21

hex

connected length



EFCIn-Line Bodies

PRODUCT A B C D

EFCD10412 2.29 .93 .75 .63EFCD10612 2.29 .93 .75 .63EFCD17412 2.23 .93 .75EFCD17612 2.24 .93 .75

EFCIn-Line Inserts

PRODUCT A B C

EFC22412/EFCD22412 1.97 1.32 .63EFC22612/EFCD22612 1.79 1.14 .63

EFCD24412 1.64 .99 .62EFCD24612 1.64 .99 .69

EFCPanel MountBodies


EFCD16412 2.23 .72 .93 .75 Ø1.25 .50 Ø11/16EFCD16612 2.24 .72 .93 .75 Ø1.25 .50 Ø11/16

A

B

C

D

C

B

E

A

B

G panel hole

HFCElbow Inserts

PRODUCT A B C D

HFC23612/HFCD23612 1.91 .99 Ø1.00 .93HFC23812/HFCD23812 1.95 1.03 Ø1.00 .93

HFC231212/HFCD231212 1.93 1.01 Ø1.00 1.25C

A

B

D

A

C

HFCIn-Line Inserts

PRODUCT A B C

HFC20612/HFCD20612 2.10 1.18 Ø1.00HFC20812/HFCD20812 2.40 1.48 Ø1.00HFC22612/HFCD22612 1.86 .94 Ø1.00HFC22812/HFCD22812 1.86 .94 Ø1.00

HFC221012/HFCD221012 2.01 1.09 Ø1.00HFC221212/HFCD221212 2.01 1.09 Ø1.00HFC24612/HFCD24612 1.77 .85 Ø1.00

HFC24612BSPT/HFCD24612BSPT 1.81 .89 Ø1.00HFC24812/HFCD24812 1.95 1.03 Ø1.00

HFC241212/HFCD241212 2.15 1.23 Ø1.05

A

BC

PRODUCT A B C D

EFC23412/EFCD23412 1.32 .67 Ø.63 .96EFC23612/EFCD23612 1.38 .73 Ø.63 .96

EFCElbow Inserts

AB

D

C

connectedlength

connectedlength

D hex

connected length

connectedlength


Dust Plugs

PRODUCT A B

CQH06DP/CQV06DP 1.03 Ø1.00CQG06DP 1.46 Ø1.50CQN06DP 1.30 Ø1.50CQN08DP 1.70 Ø1.75

DualContainmentPanel MountFittings


CQPMDCNUT0408 3.40 Ø1.25 1.13 1.65 .35 Ø3/4 1/8 NPTCQPMDCNUT0612 3.91 Ø1.50 1.38 1.74 .50 Ø1.0 1/8 NPTCQPMDCNUT0812 3.87 Ø1.50 1.38 1.70 .50 Ø1.0 1/8 NPTCQPMDCNUT1216 4.16 Ø2.00 1.88 1.80 .50 Ø1-7/16 1/8 NPT

DualContainmentNuts

PRODUCT A B C

CQDCNUT0408 1.54 Ø1.04 .88CQDCNUT0612 1.72 Ø1.43 1.13CQDCNUT0812 1.72 Ø1.43 1.13CQDCNUT1216 2.12 Ø1.82 1.63

Dust Caps

PRODUCT A B

CQH06DC/CQV06DC .88 Ø1.00CQG06DC 1.25 Ø1.50CQN06DC 1.25 Ø1.50CQN08DC 2.10 Ø1.75

Panel MountKits

A

A

A

B

B

AA

A

B

BA

A

panel holeF

EB

C

D

G

C

panelthicknessmax

.21 .25

.121.12

2"hole

Req’d

.40

.25

2.75

2.00

Ø.3322.50

PRODUCT

CQN06PMKIT 01CQN08PMKIT 01NSHPMKIT 12

Chemical Coupling Material Descriptions


POLYMERS

PolypropylenePolypropylene is an excellent general purpose, low cost resin that is highlyresistant to chemical attack from solvents and chemicals in very harshenvironments. Contact with some chemicals, such as liquid hydrocarbons,chlorinated chemicals and oxidizing acids, can cause surface crazing andmaterial swelling. In general, polypropylene is not susceptible to environmentalstress cracking, and it can be exposed under load in the toughest environments.Resistance to weathering may be limited without the use of ultraviolet lightabsorbers or stabilizers (gray colored Colder couplings will be superior touncolored versions). It may be subjected to degradation when exposed tocertain conditions of ultraviolet radiation. Due to its higher crystallinity,polypropylene has excellent moisture barrier properties and good opticalproperties. Higher crystallinity improves stiffness, but reduces impact strengthand it will become brittle when exposed to temperatures below freezing.

PEEKPolyetheretherketon (PEEK), a unique semi-crystalline, is a high temperatureresistant, engineered thermoplastic with excellent chemical and fatigueresistance, plus thermal stability. It exhibits superior mechanical and electricalproperties. With a maximum continuous working temperature of 480° F (249° C) and superior chemical resistance. PEEK works effectively as a metalreplacement in harsh environments. It is inert to all common solvents andresists a wide range of organic and inorganic liquids. It has a superiordielectric with low loss, even at high temperatures and frequencies. PEEKexhibits good radiation resistance, absorbing more than 1000 M rads ofirradiation with no significant reduction in mechanical properties, and exhibitsexceptional resistance to high doses of gamma radiation. Its outstanding wear,abrasion resistance and low coefficient of friction result in very low particlegeneration. It exhibits low smoke and toxic gas emissions (among the lowestof any thermoplastic material). PEEK, is an excellent material for a widespectrum of applications where thermal, chemical and combustion propertiesand high purity are critical to performance.

PPSPolyphenylene sulfide (PPS) polymer offers the broadest resistance tochemicals of any advanced engineering plastic. It has no known solventsbelow 392° F (200° C) and is inert to steam, strong bases, fuels, and acids.Minimal moisture absorption and a very low coefficient of linear thermalexpansion make it ideal for precise-tolerance machined components. Inaddition, PPS products exhibit excellent electrical characteristics and areinherently flame retardant. PPS is an excellent alternative to PEEK at lowertemperatures and in certain chemicals, e.g., sulfuric acid.

FLUOROPOLYMERS

PVDF Polyvinyliidene fluoride (PVDF) partially fluorinated polymer is a toughengineering thermoplastic with a balance of physical and chemical propertiesthat qualify it for high performance in a wide range of applications. It ismechanically strong and tough, has good ductility, exhibits high dielectricstrength, and has a broad, useful temperature range. As a fluoropolymer,PVDF is highly resistant to most environmental conditions, including corrosivechemicals, ultraviolet and gamma radiation, and is ideally suited to handlingwet or dry chlorine, bromine and other halogens. Grades used by Colder areamong the most pure of all commercial resins. They resist strong acids,solvents and reducing agents and are used in many industries, includingmicroelectronic processing, chemical processing, pharmaceuticalmanufacturing, and laboratory uses. Their inherent chemical resistance, highpurity and natural fire retardancy make them ideal for contact with high puritywater, acids, chlorine, halogenated solvents, and petrochemical mixtures.

PTFEPolytetrafluoroethylene (PTFE) is a crystalline molecular structure with amelting point of 621° F (327° C). It has exceptional resistance to chemicals, adensity of 2.15g, a dielectric constant of 2.1, and a loss factor that is low andstable across wide temperature and frequency range. PTFE has usefulmechanical properties from cryogenic temperatures to 500° F (260° C). It’scoefficient of friction is lower than almost any other material. It also has a highoxygen level. PTFE is a fluorocarbon resin that is isostatically compressionmolded into various shapes. It is chemically resistant to all chemicals andsolvents with the exception of some molten alkali metals, molten sodiumhydroxide, elemental fluorine, and certain fluorinating agents. This uniquechemical resistance stems from (1) the strong interatomic bonds betweenfluorine and carbon atoms, (2) shielding of the polymer’s carbon atombackbone by fluorine atoms, and (3) high molecular weight. PTFE offerschemical resistance and stability at high temperature.

Enhanced/Modified PTFEIn many ChemQuik® products, Colder utilizes Modified PTFE for criticalcomponents. Besides retaining all the proven advantages of conventionalPTFE, Enhanced or Modified PTFE offers some significantly improvedproperties:• substantially lower deformation under load• lower permeation due to denser polymer structure and fewer voids• better weldability • improved stress recovery, particularly at elevated temperatures• smoother surface finishes• higher transparency• higher dielectric breakdown voltage

PFAPFA is a perfluoroalkoxy copolymer resin. It combines the processing ease ofconventional thermoplastic resins with the excellent properties ofpolytetrafluoroethylene (PTFE). Products manufactured from PFA can offercontinuous service temperatures up to 500° F (260° C). PFA provides superiorcreep resistance at high temperatures, excellent low-temperature toughnessand exceptional flame resistance.

ECTFE/PCTFEEthylene-ChloroTriFluoro-Ethylene or ECTFE, commonly known as Halar®, andPoly-ChloroTriFluoro-Ethylene or PCTFE, commonly know as Kel-F®, both haveexcellent corrosion/chemical resistance (similar to PTFE or PFA), have superiortoughness and physical properties, have excellent temperature limits, have lowpermeability and possess excellent electrical and fire retardant properties. Bothfluoropolymers are high purity plastics suitable for use in ultra-pureapplications.

ELASTOMERS

EPDMEthylene-propylene-diene rubber (EPDM, also sometimes referred to as EPR) isproduced using a third monomer. Colder uses the higher quality peroxide-cured version. It provides exceptional resistance to temperatures through 300˚F on a wide range of chemicals, and maintains good resistance tocompression set and ozone. It is an ideal, reasonably-priced material for partsrequiring a wide resistance to chemicals utilized and produced in the chlorine,caustic and bleach industries.

Viton® FKMViton® FKM is the most widely specified fluoroelastomer seal material, wellknown for its outstanding resistance to heat, oxidation, weathering, andozone. It has outstanding resistance to a broad variety of fluids, including:aliphatic and aromatic hydrocarbons, halogenated fluids and strong acids. Ithas outstanding resistance to compression set and provides sealingperformance and longevity unmatched by any non-fluorinated elastomer.These characteristics make Viton® fluoroelastomer the perfect choice fordemanding sealing applications.

Chemraz® FFKMPerfluoroelastomers provide the broadest range of chemical resistance of anyelastomeric material, combining the resilience and sealing force of anelastomer with the chemical resistance approaching that of PTFE. Chemraz®

brand seals last longer and seal completely in harsh environments and a widerange of temperatures (-20° F to 615° F, -29° C to 324° C). These criticalprocess seals minimize microcontamination in wet and dry wafer fabricationand pharmaceutical processes. They can be utilized to provide minimalextractable ion content, significant plasma resistance, low particle generation,and high-dimensional stability, making these seals ideal for ultra high purityapplications. Chemraz is the cost-effective solution for the most difficultsealing problems in many industries, particularly fluid handling

Simriz® FFKMSimriz perfluoroelastomer seals are a cost-effective alternative to Kalrez® andChemraz® brand perfluoroelastomer seals. They provide essentially equivalentperformance at a substantial cost savings. Colder offers Simriz seals optionalon many coupling series.

PFA & FEP Encapsulated SealsEncapsulated seals are a hybrid seal combining an elastomeric core materialwith a fluoropolymer jacket typically made from PFA, FEP or some othercompound. The idea is to combine the resiliency of the elastomer with thesuperior chemical resistance of the fluoropolymer to achieve a seal that islower cost than a pure fluoroelastomer FFKM seal. Applications are limited,but where appropriate, Colder uses these types of seals to achieve highchemical performance at a lower cost.

Custom designed products may be exclusively produced for a specific customer. These proprietary products might not be available for sale. Contact your local distributor for special application couplings.


Still Looking for That Perfect Solution?Even with thousands of standard quick disconnect couplings available, we know you still maynot have found the precise part you need. That’s why, for more than 25 years, Colder’sApplication Engineering Team has worked with customers around the world to design customcoupling solutions to solve their specific problems and improve their products’ performance.Colder has solid modeling capabilities, prototype equipment, an expansive test lab, andthousands of solutions. Combine that with our years of experience and a “can do” attitude, andthere is no need for you to design your solution alone.

Consider a Custom-Designed Connector When:

n A quick disconnect will add value to your product, making it easier to use and more reliable

n Your requirements cannot be met by an existing standard Colder product

n Unique requirements, budgets or timing warrant your designer’scollaboration with Colder’s Application Engineering Team

Remember, standard catalog items generally have the advantage of quickavailability and many times, lower cost, with no initial investment oftime or money. However, depending on your volumes and technicalrequirements, it may make sense to work with our Application Engineering Teamto design a unique solution tailored for your needs.

Linear Volumetric(Plastics) (Elastomers) (Plastics) (Elastomers)

A < 10% <= 15% < 15% <=15% Excellent, little or no swelling, softening or surface deteriorationB < 15% <= 30% < 30% <= 30% Good chemical resistance, minor swelling, softening or deteriorationC < 20% <= 50% < 50% <= 60% Limited chemical resistance, moderate attack, conditional service

NR > 20% > 50% > 50% > 60% Severe attack, not recommended for useNOTE: All temperatures are in degrees Fahrenheit. Conversion: °C = (°F - 32)/1.8

Name Formula Hastelloy C 316 SS PPS PEEK™ PTFE/316SS Polypro PVDF PTFE/PFA Viton® EPDM Chemraz®

Acetic Acid C2H4O2 A to 212° A to 212° A A A A to 140° A to 122° A A 10% to 70° A to 70° A

(PTFE Encapsulated AB 50-100% to 160° A to 10% to 225° B 10-25% to 100° AB to 200° A to 70°316 Stainless St.) AB to 80% to 180° AB to 50%,150-200° B 50% to 140°

Acetic Anhydride (CH3CO)2O A A to 40% to 165° A to 200° NO DATA A AB to 130° AB to 70° A B 50% to 70° B to 200° A

(Acetyl Oxide) A 40-100% to 300° (PTFE Encapsulated NR @ 140° NR @ 122° NR 50% @ 100°316 Stainless St.) NR 100% @ 70°

Acetone CH3COCH3 A A to 212° A to 200° A to 212° A A to 230° A to 10% to 122° A NR A to 200° A

(Dimethyl Keytone) (PTFE Encapsulated AB 50% to 77°316 Stainless St.)

Acetonitrile CH3CN B @ 70° A 100% to 100° A to 200° A to 70° A AB to 75° A to 125° A NR A A

(Methyl Cyanide) NR 4% @ 192° (PTFE Encapsulated NR @ 122° B @150°316 Stainless St.) NR @ 180°

Amines (General) A to 85% to 160° A A to 70° A to 70° A AB to 120° NR A NR AB to AC AAB to 200°

Ammonia Gas NH3 A @ 100% to 140° A to 40% to 165° A to 200° A A A to 100% to 212° A A NR A to 140° A (Black 550)

(Anhydrous) A 40-100% to 212° (PTFE Encapsulated AB (White 571 & 592)316 Stainless St.)

Ammonia (Aqueous) NH3 A to 100% to 70° A to 100% to 70° A to 30% to 70° AB A A to 185° A A AB 30% to 70° A 100% to 212° A

(Ammonium Hydrate) AB to 100% to 200° AB to 212° A to 10% to 200° (PTFE Encapsulated C 10% @ 104°316 Stainless St.) A ammonia H2O

Ammonium Acetate C2H7NO2 A 19% A to 100% to 150° NO DATA NO DATA A A to 102° A to 100% to 175° A A to 140° A to 140° A

AB to 180° B at 212° B at 212°

Ammonium Fluoride NH4F A to 25% to 175° AB to 10% to 212° NR NO DATA A A A A° A to 140° A to 140° A

A 45% to 260° NR > 10% (PTFE Encapsulated316 Stainless St.)

Ammonium Hydroxide NH4OH A to 47% to 70° A to 100% to 70° A to 200° A to 212° A A to 225° A to 200° A A46% to 70° A to 160° A

(Ammonia, Aqeous) A 100% to 150° A 100% to 150° (PTFE Encapsulated AB to 70° AB to 200°AB 100% to 200° 316 Stainless St.) B 104-140°

Ammonium Sulfate (NH4)2SO4 A to 10% to boiling A to 37% to 221° A to 200° A A A 10% to 100° A A to 400° A to 70° A to 120° A

(Dolamin) A sat. to 130° AB 38-80% to 150° (PTFE EncapsulatedAB sat. to 200° A sat'd to boiling 316 Stainless St.)

Aqua Regia HCL-HNO3 NR NR NR NR A C at 70 - 104° A to 100° A A to 70° B to 104° A (White 571 & 592)

(NitroHydrochloric Acid) (Titanium: A to 70°) (PTFE Encapsulated AB to 178° B to 185° NR at 140° AB to 70° (Black 550)(Tantalum: A) 316 Stainless St.) B a 212°

Chlorine (Anhydrous) CL2 A to 140° A to 70° NR A to 10% to 70° A NR A to 100% to 200° A

(Dichlorine, (to 10 ppm to 70°) (to 10 ppm to 70°) NR Conc. @ 70° (PTFE EncapsulatedChlorinated water) 316 Stainless St.)

Citric Acid C6H8O7 A to boiling A to 50% A to 220° A to 212° A A A A A A A

B 100% 70-212° (PTFE EncapsulatedNR 60-100% >125° 316 Stainless St.)

Copper Sulfate CuO4S A to boiling A to 100% to 160° A to 223° A to 212° A A A A A to conc. to 176° A to conc. to 176° A

(Cupric Sulfate) A to 45% to 180° (PTFE Encapsulated AB to 212° AB to 212°A to 10% to 2121° 316 Stainless St.)

Dichloroacetic Acid CL2CHCO2H NO DATA NO DATA NO DATA NO DATA A AB to 100% to 125° AB to 50% to 212° A NR NO DATA A

(DCA) (PTFE Encapsulated AB 100% to 125°316 Stainless St.)

Dichloromethane CH2CL2 AB A to 70° A 100% to 70° NR A B/NR @ 70° AB to 100° to 100° A B @ 70° BC to 130° A

CHEMICAL COMPATIBILITY TABLE

DESCRIPTION OF CHEMICAL ATTACK(In 30 days to 1 year of exposure)

For ChemQuik®, DrumQuik® & NS & HFC-12 Series Coupling Materials(Updated 03/13/06)

INTERPRETATION OF TEST DATASWELLING

CHEMICAL

LOSS OF TENSILE STR.

SEAL MaterialsSPRING Materials COUPLING Materials

(Methylene Dichloride) A/NR 40% @ 100° (PTFE Encapsulated C/NR @ 88-122° B 100% 104 - 125° NR @ 140°316 Stainless St.)

Dimethyl Acetamide C4H9NO NO DATA NO DATA NO DATA NO DATA A AB to 125°F NR A NO DATA NO DATA NO DATA

(DMAC)

DI water H2O A A A to 200° A A A A A A to 70° A to 70° A

(PTFE Encapsulated AB to 200° AB to 200°316 Stainless St.)

Ethyl Alcohol C2H5OH A to 100% to 212° A to 100% to 200° A A to 212° A A to 100% to 180° A to 100% to 176° A A to 70° A to 200° A

(Ethanol/Grain Alcohol)) (PTFE Encapsulated AB to 100% to 280°(Denatured Alcohol) 316 Stainless St.)

Ethylene Glycol HOCH2-CH2OH A 20-100% A 40-100% to 200° A to 200° A to 212° A A A A A to 250° A to 212° A

A 100% (PTFE Encapsulated316 Stainless St.)

Ethyl Acetate C4H8O2 A A A 100% to 100° A to 70° A A to 180° A to 70° A NR A to 130° A

(Acetic Ether) (PTFE Encapsulated B 100 - 122°316 Stainless St.) NR @ 170°

Ether C4H10O A 100% to 200° A 100% to 212° A to 200° A to 212° NR AB to 94° A NR NR A

(Ethyl Ether) A to 56% to 171° B @ 104°(Diethyl Oxide) NR @ 140°

Formic Acid CH2O2 A 88% @ 212° A to 5% A to 100% to 70° AB to 10% to 70° A A to 100% to 70° A to 100% to 212° A AB to 50% to 104° A to 200° B

(Formylic Acid) AB 5 - 80% to 212° A to 40% to 200° BC 100% @ 70° (PTFE Encapsulated A to 40% to 104° NR 60-100% @ 70° A to 90% to 212°B 80 - 100% to 212° NR @ 37% @ 150° 316 Stainless St.) C 100% @ 140°

Hexane C6H14 A A 100% to 200° A to 200° A to 70° A BC @ 70-104° A A A to 200° NR A

(Dipropyl) (PTFE Encapsulated C @ 120-140°(N-Hexane) 316 Stainless St.) NR @ 140°

HMDS C6H19NSi2 NO DATA NO DATA NO DATA NO DATA A NO DATA NO DATA A NO DATA NO DATA A

(1,1,1,3,3,3-Hexamethyldisilazane) (PTFE EncapsulatedBis(trimethylsilyl)amine 316 Stainless St.)

Hydrobromic Acid HBr A 50% to 80° NR A to 37% to 100° NR A A 20% to 225° A dilute to 250° A A to 140° A to 200° A(Hydrogen Bromide) A 100% to 140° A to 70° (PTFE Encapsulated A to 50% to 150° A to 37% to 70°

AB to 20% to 70° 316 Stainless St.) B Conc. to 185° A 38-100 to 275°Hydrochloric Acid HCL A to 40% to 140° NR 3-100% A to 10% to 200° A to 212° A A to 100% to 70° A to 38% to 194° A A to 20% to 230° A to 25% to 140° A

(Muriatic Acid) NR 5-100% 175° (PTFE Encapsulated A to 36% to 150° A to 50% to 175° A to 25% to 140° A to 3 molar to 158°316 Stainless St.) A to 10% to 185° AB 40-70% to 70° AB 50-100% to 70° AB to 37% to 130°

Hydrofluoric Acid HF A to 100% to 70° A to 10% A to 50% to 140° AB to 25% @ 70° A A to 50% to 140° A to 100% to 212° A A to 60% to 130° A dilute to 212° AA 90% to 125° AB 16% to 120° B 60-75% @70° NR 30-100% @ 70° (PTFE Encapsulated A to 40% to 200° A to 50% to 176 AB to 60% to 130°

NR 45-80% NR 80-100% @ 70° 316 Stainless St.) A to 30% to 225° A to 30% to 212° AB to 65% to 70°

Hydrogen Peroxide H2O2 A to 100% to 75° A to 30% to 104° A to 10 to 200° A to 212° A A to 80% to 70° A to 200° A A to 104° B 5% to 140° A (White 571 & 592)

(Hydrogen Dioxide) A to 50% to 200° A 50-100% to 70° AB to 30% to 100° (PTFE Encapsulated A to 5% to 170° A to 30% to 212° A 50% to 200° B 3-30% @ 70° AB (Black 550)NR 50-100% @ 70° 316 Stainless St.) NR 30% > 125° AB @ 100% @ 160°

Iodine I2 A A 9-10% to 72° NR BC @ 70° A A to 100% @ 75° A to 100% to 170° A A to 100% to 140° AB to 160° A

NR >10% (PTFE Encapsulated AB to 100% @ 176° C 100% @ 212316 Stainless St.)

Isopropyl Alcohol (CH3)2CH-OH A 100% to 212° A to 100% to 140° A to 200° A to 75° A A to 225° A to 150° A A to 170° A to 160° A

(Isopropanol) A 47% to 356° A 100% to 212° (PTFE Encapsulated AB to158° B @212° B @176°A 11% to 70° 316 Stainless St.)

Methyl Alcohol CH3OH A to 212° A A to 150° A to 212° A A to 70° A to 148° A NR A to 160° A

(Methanol) (PTFE Encapsulated BC 100 @ 180° AB 212-257° AB to 176°(Wood Alcohol) 316 Stainless St.)

Methylene Chloride CH2CL2 A A to 100% to 200° A 100% to 70° A to 70° A NR AB to 100° A B @ 70° BC to 130° A

A to 90% to 212° (PTFE Encapsulated316 Stainless St.)

MINNCARE® Cold Sterilant H2O2 A A A A A A AB A A B A

(Hydr. Peroxide, Peracetic C2H4O3

acid, Acetic acid) C2H4O2

N-Methyl 2-Pyrrolidone NMP NO DATA NO DATA A to 70° A A A C/NR @70° A NR NR A

CH3N(CH2)3CO (PTFE Encapsulated

316 Stainless St.)

Nitric Acid HNO3 A to 99% to 130° A to 100% to 120° A to 30% to 100° A to 30% to 70° A A to 50% to 104° A to 98% to 70° A A 50% to 140° A to 25% to 70° A

(Hydrogen Nitrate) A to 50% to 140° A to 60% to 175° AB to 40% to 80° A to 10% to 212° (PTFE Encapsulated A to 30% to 180° A to 90% to 140° A 90-100% to 158° A to 10% to 104°AB 10% to 185° A to 50% to boiling NR 50-100% @ 70°° NR 50% @ 70° 316 Stainless St.) A to 10% to 210° A to 30% to 212° AC 60-70% to 70° B 25-30% to 140°

Oxalic Acid C2H2O4 A to 100% to 140° A to 50% to 100° A A A A to 100% to 140° A to 100% to 125° A A to 100% to 140° A A

(Ethanedioic Acid) A to 50% to Boil A 20-50 to 125° (PTFE Encapsulated A to 50% to 180° A to 60% to 212° A to 50% to 176°B 60-100% to Boil B 60-90% @ 70° 316 Stainless St.) B @ 100% @ 158°

Ozone O3 A 2% to 140° A to 70° NO DATA A to 212° A NR A A A to sat. to 70° A to sat. to 70° A (White 571 & 592)

(trioxygen) A 2% to 140° (PTFE Encapsulated NR sat @ 140° NR sat. @ 140 AB (Black 550)316 Stainless St.)

Phosphoric Acid H3PO4 A to 200° A to 40% to 240° A A to 212° A A to 185° A A A to 140° A to 130° A

A to 50% to boiling A to 70% to 150° (PTFE Encapsulated A to 75% to 225° A 85% to 230° A to 85% to 176° A to 85% to 176°316 Stainless St.) A 75% to 212° B to 30% to 212°

Pyridine C5H5N A to 100% to 100° A to 100% to 212° A to 200° A to 212° A A to 100% to 75° NR A NR B to 160° A

(Azine) A 100% to 140° (PTFE Encapsulated AB 100% 120-180°316 Stainless St.) NR 100% @ 120°

PGME C4H10O2 A A A B A A to 140° AB A NR A 50% to 70° A

(PTFE Encapsulated AB to 150°316 Stainless St.)

Potassium Hydroxide KOH A to 50% to 200° A to 100% to 70° A to 200° A to 212° A A *A to 25% to 140° A AB to 70° A to 200° A (Black 550)(Caustic Potash) AB 100% to 185° A to 70% to 150° A to 50% to 268° (PTFE Encapsulated A 70% to 185° A to 10% to 280° AB to 70% to 140° B 25% @ 212 AB (White 571 & 592)

316 Stainless St.) A 60-100% to 212° A 5% to 150°

Potassium Permanganate KMN04 A to 50% to 75° A to 25% to 70° A to 200° A to 75° A A to 100% to 70° A A A to 140° A to 200° A

AB 100% to 200° AB to 100% to 100° (PTFE Encapsulated A to 25% to 140°B to 30% 75-212° A 100% to 130° 316 Stainless St.) A to 10% to 180°

Sodium Hydroxide NaOH A to 100% to 70° A to 20% A to 100% to 70° A to 100% to 70° A A to 125° A to 50% to 70° A B to 70° A to 70° A (Black 550)(Caustic Soda) A to 50% to 200° AB 20- 70% to 212° A to 50% to 140° A to 54% to 392° (PTFE Encapsulated A to 70% to 225° A to 20% to 104° B 80% @140° A to 50% to 176° AB (White 571 & 592)

AB 50-80% to 170° AB 70-100% to 125° A to 20% to 200° 316 Stainless St.) A to 15% to 176° B 20% @ 212°Sodium Hypochlorite CLNaO A to 50% to 115° Generally NR BC 5% to 200° AB to 100% A A to 100% to 70° A to 17% A A to 100% to 130° AB 20-100% to 130 A

(Bleach) A to 20% to 140° A to 6% to 160° (PTFE Encapsulated A to 5% to 120° AB to 100% BC 20% @ 158°AB @100% to 200 A sat'd to 200° 316 Stainless St.) C 12%>70°

STERIS® CIP 100 Alkaline Cleaner A to 200° A to 150° A A to 212° A A A to 140° A AB to 140° A to 200° A (Black 550)(Potassium Hydroxide & KOH & AB (White 571 & 592)

Tetrasodium EDTA) C10H12N2Na4O8

STERIS® CIP 200 Acid Cleaner A to 200° A to 150° A to 220° A A A A A A A to 176° A(Phosphoric Acid & H3PO4

Citric Acid) C6H8O7

Sulfuric Acid H2SO4 A to 60% to 70° A to 20% to 70° A 10-75% to 70° A to 40% to 212° A *A to 10%° to 212° A to 90% to 212° A A to 158° A to 90% to 70° A

(Air-free) A 90-100% to 100° A 80-100% to 70° NR > 80% NR > 40% (Encaps. 316ss) A to 50% to 176° A to 96% to 175° A to 90% (Boiling) A to 70% to 176° A to 80% to 140°(Better when aerated) (A to 100% to 140°) Sensetive to concen. A to 90% to 104° A to 98% to 120° A to 50% to 212° A 10% to 176°

Tetrahydrofuran C4H8O A to 200° A to 200° A 100% to 140° A to 70° A BC @ 70° C 10-100% @ 70° A NR NR A

(Tetramethylene Oxide) C 100% @ 200° (PTFE Encapsulated C/NR @ 100-120° NR @ 120°316 Stainless St.) NR @ 140°

Thionyl Chloride CL2OS NO DATA NR NO DATA A to 70° A B/NR 10 - 100%@70° NR A AB to 70° NR A

(Sulfinyl Chloride)(Sulforous Chloride)

Toluene C7H8 A to 212° A 100% to 212° A to 100° A to 75° A NR A to 140° A A to 100° NR A

(Toluol) (PTFE Encapsulated AB @ 176° BC to 200°316 Stainless St.) BC 176-212°

Trichloroacetic Acid C2HCL302 A 100% to boiling NR A to 200° A to 68° A A to 140° A to 75° A NR B at 70° A

(TCA) AB to 100% to boil. (Fluoroware) (PTFE Encapsulated AB @ 150° A to 65% to 212°316 Stainless St.) AB 104-125°

Trichloroethylene C2HCL3 B 90% to 212° A 90% to 212° AC 70-100° A to 212° A NR A to 189° A NR B A

(Ethylene Trichloride) A 100% to 212° A 100 to 140° NR @ 200° (PTFE Encapsulated (blackens)(Triad) 316 Stainless St.)

Xylene C8H10 A A 75-100% A to 200° A to 70° A NR A to 175° A A to 140° NR A

(Xylol) A 50% to 220° (PTFE Encapsulated316 Stainless St.)

The compatibility data was assembled from 3 main sources, a) the Chemical Resistance Guides published by COMPASS PUBLICATIONS ©, b) the Chemical Resistance guide published by VICTREX, the manufacturer of PEEK™ and c) the Entegris Chemical Compatibility Chart. The table is to be used as a general guide only. Colder Products Company is not responsible for the accuracy of this data and assumes no obligation of liability in connection with its use. Therefore, CPC insists that all customers test and evaluate the suitability for use of CPC couplings in their particular application before using the couplings!

* PVDF may discolor after prolonged exposure in Potassium Hydroxide.* Polypropylene may discolor after prolonged exposure in Sulfuric Acid.

Viton® is a registered trademark of Dupont Dow Elastomers, PEEK™ is a trademark of Victrex USA, Inc, Halar® is a registered trademark of Ausimont, Chemraz® is a registered trademark of Green Tweed.

NOTES:

WARNING:

(Use Encap SS > 80%, PPS to 80% concentrations)

(Propylene Glycol Monomethyl Ether)(Dowtherm 209 / Dowanol PM)

Copyright © 2006 by Colder Products Company. All rights reserved. Colder Products Company,Colder Products and Colder are registered trademarks with the US Patent & Trademark Office. CAT2001 02/06 1.5M/DG Printed in the U.S.A.

Colder Warranty Statement: Colder Products Company warrants its products against defects in workmanship and materials a period of 12months from the date of sale by Colder Products Company to its initial customer (regardless of any subsequent sale of the products). Thiswarranty is void if the product is misused, altered, tampered with or is installed or used in a manner that is inconsistent with Colder ProductCompany's written recommendations, specifications and/or instructions, or fails to perform due to normal wear and tear. Colder ProductsCompany does not warrant the suitability of the product for any particular application. Determining product application suitability is solelythe customer's responsibility. Colder Products Company is not liable for special, indirect, incidental, consequential or other damagesincluding, but not limited to, loss, damage, personal injury, or any other expense directly or indirectly arising from the use of or inability touse its products either separately or in combination with other products. ALL OTHER WARRANTIES EXPRESS OR IMPLIED, WHETHER ORAL,WRITTEN OR IN ANY OTHER FORM, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED.

The sole and exclusive remedy under this warranty is limited, at the option of Colder Products Company, to replacement of the defectiveproduct or an account credit in the amount of the original selling price. All allegedly defective Colder Products Company products must bereturned prepaid transportation to Colder Products Company, together with information describing the product's application andperformance, unless otherwise authorized in writing by Colder Products Company.

WARNING: Pressure, temperature, chemical type and concentration, and operating environment can affect the performance of couplings. It is the customer’s responsibility to test the suitability of Colder products in their own application conditions.

Colder Patent Statement:Colder Products Company takes pride in itsinnovative quick disconnect couplingsolutions, many of which have been awardedUnited States and International patents.Colder Products Company has a strongtradition of leadership in the quick disconnectmarket, and aggressively pursues and protectsits proprietary information and intellectualproperty. In cases where it is practical and as abenefit to its customers, Colder ProductsCompany has licensed its proprietarytechnology. Please contact Colder Products todiscuss your unique needs.

ChemQuik® and DrumQuik® are registeredtrademarks and with the US Patent andTrademark Office.

Chemraz® is a registered trademark of Greene,Tweed & Co. Krytox® is a registered trademark ofDuPont Company. PEEK® is a registeredtrademark of Victrex USA, Inc. Simriz® is aregistered trademark of Freudenberg-NOK.Teflon and Viton® are registered trademarks ofDuPont Dow Elastomers. Dyneon™ is atrademark of 3M-Hoechst.

Industrial Bioprocessing Medical Device Food, Beverage & WaterSmart Technology

On-line Catalogs and Literature

Date post:	26-Feb-2021
Category:	Documents
Upload:	others
View:	5 times
Download:	0 times

Quick Disconnect Couplings for - Gonfiottigonfiotti.com/prodotti/832_CPC-Chemical_C.pdfNon-Spill...

Documents