Date post: | 08-Apr-2016 |
Category: |
Documents |
Upload: | quickinstall |
View: | 229 times |
Download: | 0 times |
Qi DL UniQ - 927
75 - 83mm
450 lm
CRI > 90
2700K
NO INSTALLATION BOX IS REQUIRED
SUITABLE FOR DIFFERENT SIZED CUT-
OUT HOLES
HIGH EFFICIENCY
GOOD COLOR RENDERING
WARM WHITE LIGHT COLOR
75-83mm
NEW & UNIQ
More new articles:Qi DL Design
p. 4
‘2. www.quickinstall.no
75-83mm
When you choose a downlight from Quick Install both you and your custo-mer will save time and money. No installation box is required, and it can be mounted directly into the insulation. Excellent for rehabilitation of halogen systems.
The body of the downlight has a diameter of 72mm, while the ring areahas a diameter of 98mm. This makes the downlight suitable for cut-out holes ranging from 75mm to 83mm.
Recessed ring allows smooth and perfect surface connection without any gaps and shadows!
No installation box is required!
Suitable for different sized cut-out holes
Perfect fitting - no gaps between ceiling and downlight
Insulation
98mm
41,3mm
72mm
13mm
Ceiling 11mm
Installation space (using a 30mm plank)
30,3mm
‘www.quickinstall.no 3.
Qi DL UniQ - 927Approvedby Nemko
36˚ 35°Ø75
IP 21IP44F90°
Firerated
LED
75-83mm DIM
230V50/60Hz
• Quick installation, without installation box• 450lm - 7,5W - 230V• Adjustable: 35°. Light Angle: 36°. • The lamp has a satin touch, which provides a low glare.
UGR<19• Light colour warm white: 2700K • High color rendering: CRI > 90 • Cut-out hole: Ø75 - 83mm• IP44
• Firerated F90 (90 min)• Loop In, loop out connection (No crossing wires)• 5 year warranty w/8h daily use• Expected life (L70): 50 000 hours • Dimbar: Både forkant- og bakkant-dimmer kan benyttes. • Dimmable 1 - 100%
(See dimming guide on www.quickinstall.no)• H: 41,3mm Ø: 98mm
This LED downlight is quick and easy to install. It does not require any installation box; saves time and money! It fitsboth new buildings and home improvement. It has an attractive design, and provides a nice warm white LED light. It is firerated and approved for being installed into ceilings with a 90 min fire resistance in case of fire.
Benefits:• No installation box• Installation directly into the insulation area• Saves time on installation• Saves money
• LED - saves energy• Satisfied customers• No gaps between ceiling and downlight
Art.no. 3234413 927, round, white
Art.no. 3234414927, round, alu
Art.no. 3234415927, round, black
UNIQ DOWNLIGHT
*Coming spring 2015
‘4. www.quickinstall.no
‘www.quickinstall.no 5.
Qi DL DesignApprovedby Nemko
36˚ 35°Ø75
IP 21IP44LED
83mm DIM
230V50/60Hz
• Quick installation, without installation box• 470lm - 10W - 230V• Tiltable: 35°. Light Angle: 36°• Light colour warm white: 2700K • High color rendering: CRI = 95 • Cut-out hole: 83 mm• IP44
• Loop In, loop out connection (No crossing wires)• 5 year warranty w/8h daily use• Expected life (L70): 50 000 hours • Dimmable 1 - 100%
(See dimming guide on www.quickinstall.no)• H: 57,9mm Ø: 98mm
This is another new downlight from Quick Install, with great light and design. Through the back positioning of the LED light source the downlight is glare free. The angle can be adjusted and it has a modern design.
Art.no. 3234430 Round, white
Art.no. 3234431Round, alu
*Coming spring 2015
Benefits:• No installation box• Installation directly into the insulation area• Saves time on installation• Saves money
• LED - saves energy• Satisfied customers• No gaps between ceiling and downlight
310,75mm
98,6mm
82,49mm
51,9
mm
25,1
mm
60,4
mm
‘6. www.quickinstall.no
Qi LED 230V track
This 230V track system has a sophisticated design and is easy to install! Due to the high flexi-bility it can be custumized to meet the individual requirements of the customer. Compact and slim design. Complete track length is 2 meters, including 4 spots with Osram 7W LED lamp (equivalent to 50W) and end connector.
The kit includes:• 4 pcs spots with Osram 7W LED lamp • 2 pcs 1m track • 1 pcs end powerfeed • 2 pcs “invisible” connector
Benefits:• Attractive design • Easy to install • No transformer • Flexible • Dimmable
• 2 pcs spots with Osram 7W LED lamp • 1 m track • 1pcs connector, both straight and 90º
Expand with multiple spots. 7W Osram lamp included (equivalent to 50W).
Universal, suitable for ”all” pendants. Simple up to 1,5 kg Double up to 3 kg.
Art.no.: 3300041Qi LED 230V track - starter set
Art.nr: 3300042Qi LED 230V track - extension set
Art.nr: 3300043Qi LED 230V track - spot
Art.nr: 3300044Qi LED 230V track - pendant
LED230V GU10 7,5W
Extension set
Qi LED 230V track - starter set
Trackspot Track pendant
VIDEO:
1:1
18 mm
18 mm
‘www.quickinstall.no 7.
‘8. www.quickinstall.no
Art.nr. 3300000Qi LED ceiling lamp
Art.nr. 3300001Qi LED ceiling lamp w/sensor
Qi LED Ceiling lamp
Qi LED ceiling lamp Qi LED ceiling lamp w/sensor
Quick and easy installation as well as consistent light distribution. The LEDs are placed around the edge of the fixture, performing an even and well balanced light distribution! They fit over standard roof box.
LED 230V50/60Hz130˚
• LED 16W • 1000 lm • System Power: 20W • 230V • IP40 • Warm white light: 2700K
• Good color rendering, CRI: Ra>85
• Dimensions: Ø350mm, H99mm
• 5 years warranty, daily use of 8 hours
• LED 16W • 1000 lm • System Power: 20W • 230V • IP40 • Warm white light: 2700K
• Good color rendering, CRI: Ra>85
• Dimensions: Ø326mm, H98mm
• 5 years warranty, daily use of 8 hours
VIDEO:
‘www.quickinstall.no 9.
‘10. www.quickinstall.no
‘www.quickinstall.no 11.
Qi LED strips
Our complete LED strips - starter set is simple and easy to install. Total length of 5 meters. Extendable up to 10 meters by using our “Qi LED strips - extension set” on the same power supply (5m x 2). Automatic temperature control. LED strips are ideal for lots of purposes and can be used almost anywhere.
• IP67 (LED strips only) • 24 VDC LED strip, 60 LED pr. m.• 100-240V 96W • 500lm/m, 36W/5m • Dimmable (remote included)• Expected life: 50 000 hours
• PCB Color: white • 2700K, CRI > 80 • 5m per roll (cutable every 6 LEDs) • 3M adhesive tape, applied on the backside of LED strip • Working temp: -10ºC - + 40ºC
Extendable by 5 metres. Suitable in combination with Qi LED strips starter KIT, extendable to max length of 10m.
Complete set of RGB LED strips: quick and easy installa-tion. Automatic temperature control. 10 different modes - almost infinite variations and lighting applications.
Art.nr: 3300010Qi LED strips - starter set, WW
Art.nr: 3300011Qi LED strips - extension set
Art.nr: 3300012Qi LED strips - RGB set
Qi LED strips - extension set
Qi LED strips - starter set
Qi LED strips - RGB set
Included:• 5m LED strips • Power supply • Dimming Module • Remote control w / wall bracket • Installation and wiring materials
IP67LED 230V50/60Hz
VIDEO:
‘12. www.quickinstall.no
‘www.quickinstall.no 13.
• Ultra slim - unique and innovative design • IP66• 3000K• Aluminium with bracket
• Expected life: 50 000 hours • 12W - 72W• Energy-efficiency and high performance
Art.nr. 3234480Qi LED floodlight - 12W
Qi LED floodlight
Unique and innovative lighting and compact design. Available in a range from 12W up to 72W. Expected lifetime 50 000 hours. With IP66 protection it is suitable for outdoor use.
Art.nr. 3234481Qi LED floodlight - 24W
Art.nr. 3234482Qi LED floodlight - 48W
Art.nr. 3234483Qi LED floodlight - 72W*
LUMEN TABLE:
12W = 960lm24W = 2000lm48W = 4000lm72W = 5400lm
IP66
12W: L 175mm, W 135mm, H 42mm24W: L 220mm, W 170mm, H 45mm48W: L 290mm, W 225mm, H 55mm72W: L 330mm, W 250mm, H 75mm
IP66LED
*Coming spring 2015
‘14. www.quickinstall.no
Qi EsyFold
Art.nr: 8801800
• No sharp edges• Can be used on both sides of the metal frames• Supports an easy cable installation within the metal frames,
regardless of the drilling direction
• Can be used in corners• Drills holes into metal frames quickly• Easy to use• Hole diameter ø28 mm
Qi EsyFold is a tool manufactured from hardened steel.The hole saw as well as the drill bit is replaceable. The saw design makes metal sawdust easily fall out of the drilled holes. The tool comes in a size that allows it to be easily stored in a toolbox or work vest.
Drills holes into metal
frames quickly
VIDEO:
No sharp edges
‘www.quickinstall.no 15.
Art.nr. 1231202Qi Spotless Pro - dust collector
Qi Spotless Pro- dust collector
• No stains on the ceiling• Easily cleanable• Stain-free rubber securing a long lifetime and• no stains• Solid cup, made of acryl• The cup doesn’t rotate during operation
• Fits hole- saws from 32mm – 127mm• Ball bearing closed and greased. Securing a• long life.• Axle of semi-hardy compact steel• Spring, securing tightness against ceiling.• Satisfied customers and electricians
When drilling holes for downlights, wall installation boxes etc., there is a lot of dust emitted into the air. The inhalation of dust, dust in eyes, hair and clothes are vital issues an electrician has to deal with when doing these kinds of installations. Also the room, where an installation is being done, will be covered with dust. By using Qi Spotless Pro–Dust Collector you will avoid all of these problems. This is a need-to-have tool for all electricians!
Drills holes – without dust!• Avoid inhalation of dust• Avoid dust in eyes, ears and clothes• Dust-free installation site = no cleaning• Long life• No dust in your power-drill, enhancing the life length• SKS ball bearing• Fits most power drills• Solid cup of acryl• Contains 2 drill bits
‘Quick Install ASOur products are quick and easy to install, they have a beautiful design and the documentation is easy accesible.
Quick Install ASwww.quickinstall.no
Tlf: +47 38 60 44 00