AD332_revC Use PGM to select program A, B, C, or D. Use NEXT and BACK buttons to select options and scroll between zones. ProLine® Programming 1 Set time of day (AM/PM) and month/day/year. 2 Set daily start times (AM/PM) for Programs (A, B, C, D) in use. Normally, one start time is sufficient. The start time is for the Program and not each zone. The Program will run all zones in consecutive order for each start. 3 Set zone run times (1 min to 9 hours 55 minutes) for Programs (A, B, C, D) in use. 4 Set watering days by selecting days of week or interval (1 to 30 days) or odd or even days for Programs (A, B, C, D) in use. 5 Set omit times, days, and dates to accommodate watering blackout periods (optional). 6 Set seasonal % by month for Programs A, B, C, D (optional). 7 Return dial to RUN. PGM PROGRAM NEXT BACK UP PRESS TO START MANUAL PROGRAM DOWN RUN SYSTEM OFF MANUAL ZONE MANUAL TEST MANUAL PROGRAM MULTIMETER VALVE LOCATOR SENSOR OPERATION RUN AND SOAK CYCLES CED MENU SEASONAL % ADJUST OMIT TIMES /DAYS DAYS TOWATER ZONE RUN TIMES PROGRAM START TIMES CURRENT TIME / DATE Manual Zone Turn dial to MANUAL ZONE. Use NEXT button to select zone to run. Use UP and DOWN buttons to select zone run time (1 min to 9 hours 55 minutes). Return dial to RUN to start. Manual Test Turn dial to MANUAL TEST. Use UP and DOWN buttons to enter run time (10 seconds to 10 minutes) for all zones with assigned run time. Return dial to RUN to start. Manual Program Turn dial to MANUAL PROGRAM. Use UP and DOWN buttons to select the program you want to run (PROG A, B, C or D). Return dial to RUN to start. RUN SYSTEM OFF CURRENT TIME / DATE MANUAL ZONE MANUAL TEST MANUAL PROGRAM MULTIMETER VALVE LOCATOR SENSOR OPERATION RUN AND SOAK CYCLES ADVANCED MENU SEASONAL % ADJUST OMIT TIMES / DAYS DAYS TO WATER ZONE RUN TIMES RUN SYSTEM OFF CURRENT TIME / DATE MANUAL ZONE MANUAL TEST MANUAL PROGRAM MULTIMETER VALVE LOCATOR SENSOR OPERATION RUN AND SOAK CYCLES ADVANCED MENU SEASONAL % ADJUST OMIT TIMES /DAYS DAYS TOWATER ZONE RUN TIMES PROGRAM START TIMES RUN SYSTEM OFF CURRENT TIME / DATE PROGRAM START TIMES MANUAL ZONE MANUAL TEST MANUAL PROGRAM MULTIMETER VALVE LOCATOR SENSOR OPERATION RUN AND SOAK CYCLES ADVANCED MENU SEASONAL % ADJUST OMIT TIMES / DAYS DAYS TO WATER RUN SYSTEM OFF CURRENT TIME / DATE PROGRAM START TIMES MANUAL ZONE MANUAL TEST MANUAL PROGRAM MULTIMETER VALVE LOCATOR SENSOR OPERATION RUN AND SOAK CYCLES ADVANCED MENU SEASONAL % ADJUST OMIT TIMES /DAYS DAYS TOWATER ZONE RUN TIMES RUN SYSTEM OFF CURRENT TIME / DATE PROGRAM START TIMES ZONE RUN TIMES MANUAL ZONE MANUAL TEST MANUAL PROGRAM MULTIMETER VALVE LOCATOR SENSOR OPERATION RUN AND SOAK CYCLES ADVANCED MENU SEASONAL % ADJUST OMIT TIMES / DAYS RUN SYSTEM OFF CURRENT TIME / DATE PROGRAM START TIMES ZONE RUN TIMES MANUAL ZONE MANUAL TEST MANUAL PROGRAM MULTIMETER VALVE LOCATOR SENSOR OPERATION RUN AND SOAK CYCLES ADVANCED MENU SEASONAL % ADJUST OMIT TIMES /DAYS DAYS TO WATER RUN RUN ProLine Controller Quick Start Guide RUN www.dramm.com Refer to Owner’s Manual for complete instructions. Help Desk: 920/684.0227
Transcript
AD332_revC
Use PGM to select program A, B, C, or D.
Use NEXT and BACK buttons to select options and scroll between zones.
ProLine® Programming
1 Set time of day (AM/PM) and month/day/year.
2 Set daily start times (AM/PM) for Programs (A, B, C, D) in use.
Normally, one start time is sufficient. The start time is for the Program and not each zone. The Program will run all zones in consecutive order for each start.
3 Set zone run times (1 min to 9 hours 55 minutes) for Programs
(A, B, C, D) in use.
4 Set watering days by selecting days of week or interval (1 to
30 days) or odd or even days for Programs (A, B, C, D) in use.
5 Set omit times, days, and dates to accommodate watering
blackout periods (optional).
6 Set seasonal % by month for Programs A, B, C, D (optional).
7 Return dial to RUN.
PGMPROGRAM
NEXT
BACK
UP
PRESS TO STARTMANUAL PROGRAM
DOWN
ENGLISH
ESPAÑOL
LANGUAGE
SYSTEM OFF
ADVANCEDMENU
RUN
ON RAIN/FREEZESENSING
OFF
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLES
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
OMIT TIMES / DAYS
SEASONAL % ADJUST
MANUAL ZONE
MANUAL TEST
RUNSYSTEM OFFMANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
OMIT TIMES / DAYS
DAYS TO WATER
ZONE RUN TIMES
PROGRAM START TIMES
RUNSYSTEM OFFMANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
OMIT TIMES / DAYS
DAYS TO WATER
ZONE RUN TIMES
PROGRAM START TIMES
CURRENT TIME / DATE
Manual ZoneTurn dial to MANUAL ZONE. Use NEXT button to select zone to run. Use UP and DOWN buttons to select zone run time (1 min to 9 hours 55 minutes). Return dial to RUN to start.
Manual TestTurn dial to MANUAL TEST. Use UP and DOWN buttons to enter run time (10 seconds to 10 minutes) for all zones with assigned run time. Return dial to RUN to start.
Manual ProgramTurn dial to MANUAL PROGRAM. Use UP and DOWN buttons to select the program you want to run (PROG A, B, C or D). Return dial to RUN to start.
RUNSYSTEM OFF
CURRENT TIME / DATE
MANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
OMIT TIMES / DAYS
DAYS TO WATER
ZONE RUN TIMES
RUNSYSTEM OFF
CURRENT TIME / DATE
MANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
OMIT TIMES / DAYS
DAYS TO WATER
ZONE RUN TIMES
PROGRAM START TIMES
RUNSYSTEM OFF
CURRENT TIME / DATE
PROGRAM START TIMES
MANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
OMIT TIMES / DAYS
DAYS TO WATER
RUNSYSTEM OFF
CURRENT TIME / DATE
PROGRAM START TIMES
MANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
OMIT TIMES / DAYS
DAYS TO WATER
ZONE RUN TIMES
RUNSYSTEM OFF
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
MANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
OMIT TIMES / DAYS
RUNSYSTEM OFF
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
MANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
OMIT TIMES / DAYS
DAYS TO WATER
RUNSYSTEM OFF
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
MANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
RUNSYSTEM OFF
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
MANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
OMIT TIMES / DAYS
SYSTEM OFF
ADVANCEDMENU
RUN
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLES
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
OMIT TIMES / DAYS
SEASONAL % ADJUST
MANUAL ZONE SYSTEM OFF
ADVANCEDMENU
RUN
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLES
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
OMIT TIMES / DAYS
SEASONAL % ADJUST
MANUAL ZONE
MANUAL TEST
SYSTEM OFF
ADVANCEDMENU
RUN
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLES
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
OMIT TIMES / DAYS
SEASONAL % ADJUST
MANUAL TEST
SYSTEM OFF
ADVANCEDMENU
RUN
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLES
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
OMIT TIMES / DAYS
SEASONAL % ADJUST
MANUAL TEST
MANUAL ZONE
RUNSYSTEM OFF
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
OMIT TIMES / DAYS
MANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
RUNSYSTEM OFF
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
OMIT TIMES / DAYS
MANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
MANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
OMIT TIMES / DAYS
DAYS TO WATER
ZONE RUN TIMES
PROGRAM START TIMES
CURRENT TIME / DATE
SYSTEM OFFMANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
OMIT TIMES / DAYS
DAYS TO WATER
ZONE RUN TIMES
PROGRAM START TIMES
CURRENT TIME / DATE
SYSTEM OFFRUN
ProLine ControllerQuick Start Guide
SYSTEM OFF
ADVANCEDMENU
RUN
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLES
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
OMIT TIMES / DAYS
SEASONAL % ADJUST
MANUAL ZONE
MANUAL TEST
SYSTEM OFF
ADVANCEDMENU
RUN
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLES
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
OMIT TIMES / DAYS
SEASONAL % ADJUST
MANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
www.dramm.com
Refer to Owner’s Manual for complete instructions.
Help Desk: 920/684.0227
AD332_revC
Use PGM para seleccionar el programa A, B, C o D.
Use los botones “SIGUIENTE” y “ANTERIOR” para seleccionar opciones y avanzar o retroceder entre las distintas zonas.
Programación Estándar de ProLine®
1 Programe la hora del día (AM / PM) y el mes / día / año.
2 Programe las horas de funcionamiento diario para programas (A,
B, C, D) en uso normalmente un periodo de servicio es suficiente. El tiempo de incio es para el programa no es por cada zona. El programa correra entodas las zonas en orden consecutiva para cada incio.
3 Programe las horas de iniciodiario (1 minuto a 9 horas 55 minuto) para los
Programas (A, B, C, D) en uso.
4 Programe los días de riego seleccionando los días de la semana
o los intervalos (1 a 30 días) o días nones o pares para los Programas (A, B, C, D) en uso.
5 Programe las horas, días y fechas de omisión para acomodar los períodos
de bloqueo de riego (opcional).
6 Programe el porcentaje estacional por mes para los programas A, B, C,
D (opcional).
7 Regrese el selector a la posición “ENCENDIDO”.
PGMPROGRAM
NEXT
BACK
UP
PRESS TO STARTMANUAL PROGRAM
DOWN
ENGLISH
ESPAÑOL
LANGUAGE
SYSTEM OFF
ADVANCEDMENU
RUN
ON RAIN/FREEZESENSING
OFF
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLES
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
OMIT TIMES / DAYS
SEASONAL % ADJUST
MANUAL ZONE
MANUAL TEST
RUNSYSTEM OFFMANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
OMIT TIMES / DAYS
DAYS TO WATER
ZONE RUN TIMES
PROGRAM START TIMES
RUNSYSTEM OFFMANUAL ZONE
MANUAL TEST
MANUAL PROGRAM
MULTIMETER
VALVE LOCATOR
SENSOR OPERATION
RUN AND SOAK CYCLESADVANCED
MENU
SEASONAL % ADJUST
OMIT TIMES / DAYS
DAYS TO WATER
ZONE RUN TIMES
PROGRAM START TIMES
CURRENT TIME / DATE
Zona ManualGire el selector a “ZONA MANUAL”
(zona manual). Use el botón “SIGUIENTE” para seleccionar la zona de funcionamiento. Use las de botones HACIA ARRIBA y HACIA ABAJO para seleccionar el tiempo de funcionamiento de la zona (1 minuto a 9 horas con 55 minutos). Regrese el selector a “ENCENDIDO” para arrancar.
Prueba Manual Gire el selector a “TEST MANUAL”. Use las de botones HACIA ARRIBA HACIA ARRIBA y HACIA ABAJO para registrar el tiempo de funcionamiento (10 segundos a 10 minutos) para todas las zonas con tiempos de funcionamiento asignados. Regrese el selector a “ENCENDIDO” (funcionamiento) para arrancar.
Consulte en el Manual del Propietario la posición del selector en Funciones Avanzadas.
